diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_dpll.c')
-rw-r--r-- | drivers/gpu/drm/i915/display/intel_dpll.c | 519 |
1 files changed, 514 insertions, 5 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_dpll.c b/drivers/gpu/drm/i915/display/intel_dpll.c index 7ba7f315aaee..3e3c5eed1600 100644 --- a/drivers/gpu/drm/i915/display/intel_dpll.c +++ b/drivers/gpu/drm/i915/display/intel_dpll.c @@ -3,11 +3,13 @@ * Copyright © 2020 Intel Corporation */ #include <linux/kernel.h> +#include "intel_crtc.h" #include "intel_display_types.h" #include "intel_display.h" #include "intel_dpll.h" #include "intel_lvds.h" #include "intel_panel.h" +#include "intel_sideband.h" struct intel_limit { struct { @@ -845,7 +847,7 @@ static void i9xx_compute_dpll(struct intel_crtc *crtc, dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } - if (INTEL_GEN(dev_priv) >= 4) + if (DISPLAY_VER(dev_priv) >= 4) dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); if (crtc_state->sdvo_tv_clock) @@ -859,7 +861,7 @@ static void i9xx_compute_dpll(struct intel_crtc *crtc, dpll |= DPLL_VCO_ENABLE; crtc_state->dpll_hw_state.dpll = dpll; - if (INTEL_GEN(dev_priv) >= 4) { + if (DISPLAY_VER(dev_priv) >= 4) { u32 dpll_md = (crtc_state->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; crtc_state->dpll_hw_state.dpll_md = dpll_md; @@ -924,7 +926,7 @@ static int hsw_crtc_compute_clock(struct intel_crtc *crtc, to_intel_atomic_state(crtc_state->uapi.state); if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) || - INTEL_GEN(dev_priv) >= 11) { + DISPLAY_VER(dev_priv) >= 11) { struct intel_encoder *encoder = intel_get_crtc_new_encoder(state, crtc_state); @@ -1344,7 +1346,7 @@ static int i8xx_crtc_compute_clock(struct intel_crtc *crtc, void intel_dpll_init_clock_hook(struct drm_i915_private *dev_priv) { - if (INTEL_GEN(dev_priv) >= 9 || HAS_DDI(dev_priv)) + if (DISPLAY_VER(dev_priv) >= 9 || HAS_DDI(dev_priv)) dev_priv->display.crtc_compute_clock = hsw_crtc_compute_clock; else if (HAS_PCH_SPLIT(dev_priv)) dev_priv->display.crtc_compute_clock = ilk_crtc_compute_clock; @@ -1356,8 +1358,515 @@ intel_dpll_init_clock_hook(struct drm_i915_private *dev_priv) dev_priv->display.crtc_compute_clock = g4x_crtc_compute_clock; else if (IS_PINEVIEW(dev_priv)) dev_priv->display.crtc_compute_clock = pnv_crtc_compute_clock; - else if (!IS_GEN(dev_priv, 2)) + else if (!IS_DISPLAY_VER(dev_priv, 2)) dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock; else dev_priv->display.crtc_compute_clock = i8xx_crtc_compute_clock; } + +static bool i9xx_has_pps(struct drm_i915_private *dev_priv) +{ + if (IS_I830(dev_priv)) + return false; + + return IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv); +} + +void i9xx_enable_pll(struct intel_crtc *crtc, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + i915_reg_t reg = DPLL(crtc->pipe); + u32 dpll = crtc_state->dpll_hw_state.dpll; + int i; + + assert_pipe_disabled(dev_priv, crtc_state->cpu_transcoder); + + /* PLL is protected by panel, make sure we can write it */ + if (i9xx_has_pps(dev_priv)) + assert_panel_unlocked(dev_priv, crtc->pipe); + + /* + * Apparently we need to have VGA mode enabled prior to changing + * the P1/P2 dividers. Otherwise the DPLL will keep using the old + * dividers, even though the register value does change. + */ + intel_de_write(dev_priv, reg, dpll & ~DPLL_VGA_MODE_DIS); + intel_de_write(dev_priv, reg, dpll); + + /* Wait for the clocks to stabilize. */ + intel_de_posting_read(dev_priv, reg); + udelay(150); + + if (DISPLAY_VER(dev_priv) >= 4) { + intel_de_write(dev_priv, DPLL_MD(crtc->pipe), + crtc_state->dpll_hw_state.dpll_md); + } else { + /* The pixel multiplier can only be updated once the + * DPLL is enabled and the clocks are stable. + * + * So write it again. + */ + intel_de_write(dev_priv, reg, dpll); + } + + /* We do this three times for luck */ + for (i = 0; i < 3; i++) { + intel_de_write(dev_priv, reg, dpll); + intel_de_posting_read(dev_priv, reg); + udelay(150); /* wait for warmup */ + } +} + +static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + u32 reg_val; + + /* + * PLLB opamp always calibrates to max value of 0x3f, force enable it + * and set it to a reasonable value instead. + */ + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1)); + reg_val &= 0xffffff00; + reg_val |= 0x00000030; + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val); + + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13); + reg_val &= 0x00ffffff; + reg_val |= 0x8c000000; + vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val); + + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1)); + reg_val &= 0xffffff00; + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val); + + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13); + reg_val &= 0x00ffffff; + reg_val |= 0xb0000000; + vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val); +} + +static void _vlv_enable_pll(struct intel_crtc *crtc, + const struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + + intel_de_write(dev_priv, DPLL(pipe), pipe_config->dpll_hw_state.dpll); + intel_de_posting_read(dev_priv, DPLL(pipe)); + udelay(150); + + if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1)) + drm_err(&dev_priv->drm, "DPLL %d failed to lock\n", pipe); +} + +void vlv_enable_pll(struct intel_crtc *crtc, + const struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + + assert_pipe_disabled(dev_priv, pipe_config->cpu_transcoder); + + /* PLL is protected by panel, make sure we can write it */ + assert_panel_unlocked(dev_priv, pipe); + + if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) + _vlv_enable_pll(crtc, pipe_config); + + intel_de_write(dev_priv, DPLL_MD(pipe), + pipe_config->dpll_hw_state.dpll_md); + intel_de_posting_read(dev_priv, DPLL_MD(pipe)); +} + + +static void _chv_enable_pll(struct intel_crtc *crtc, + const struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + enum dpio_channel port = vlv_pipe_to_channel(pipe); + u32 tmp; + + vlv_dpio_get(dev_priv); + + /* Enable back the 10bit clock to display controller */ + tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)); + tmp |= DPIO_DCLKP_EN; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp); + + vlv_dpio_put(dev_priv); + + /* + * Need to wait > 100ns between dclkp clock enable bit and PLL enable. + */ + udelay(1); + + /* Enable PLL */ + intel_de_write(dev_priv, DPLL(pipe), pipe_config->dpll_hw_state.dpll); + + /* Check PLL is locked */ + if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1)) + drm_err(&dev_priv->drm, "PLL %d failed to lock\n", pipe); +} + +void chv_enable_pll(struct intel_crtc *crtc, + const struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + + assert_pipe_disabled(dev_priv, pipe_config->cpu_transcoder); + + /* PLL is protected by panel, make sure we can write it */ + assert_panel_unlocked(dev_priv, pipe); + + if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) + _chv_enable_pll(crtc, pipe_config); + + if (pipe != PIPE_A) { + /* + * WaPixelRepeatModeFixForC0:chv + * + * DPLLCMD is AWOL. Use chicken bits to propagate + * the value from DPLLBMD to either pipe B or C. + */ + intel_de_write(dev_priv, CBR4_VLV, CBR_DPLLBMD_PIPE(pipe)); + intel_de_write(dev_priv, DPLL_MD(PIPE_B), + pipe_config->dpll_hw_state.dpll_md); + intel_de_write(dev_priv, CBR4_VLV, 0); + dev_priv->chv_dpll_md[pipe] = pipe_config->dpll_hw_state.dpll_md; + + /* + * DPLLB VGA mode also seems to cause problems. + * We should always have it disabled. + */ + drm_WARN_ON(&dev_priv->drm, + (intel_de_read(dev_priv, DPLL(PIPE_B)) & + DPLL_VGA_MODE_DIS) == 0); + } else { + intel_de_write(dev_priv, DPLL_MD(pipe), + pipe_config->dpll_hw_state.dpll_md); + intel_de_posting_read(dev_priv, DPLL_MD(pipe)); + } +} + +void vlv_prepare_pll(struct intel_crtc *crtc, + const struct intel_crtc_state *pipe_config) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + enum pipe pipe = crtc->pipe; + u32 mdiv; + u32 bestn, bestm1, bestm2, bestp1, bestp2; + u32 coreclk, reg_val; + + /* Enable Refclk */ + intel_de_write(dev_priv, DPLL(pipe), + pipe_config->dpll_hw_state.dpll & ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV)); + + /* No need to actually set up the DPLL with DSI */ + if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0) + return; + + vlv_dpio_get(dev_priv); + + bestn = pipe_config->dpll.n; + bestm1 = pipe_config->dpll.m1; + bestm2 = pipe_config->dpll.m2; + bestp1 = pipe_config->dpll.p1; + bestp2 = pipe_config->dpll.p2; + + /* See eDP HDMI DPIO driver vbios notes doc */ + + /* PLL B needs special handling */ + if (pipe == PIPE_B) + vlv_pllb_recal_opamp(dev_priv, pipe); + + /* Set up Tx target for periodic Rcomp update */ + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f); + + /* Disable target IRef on PLL */ + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe)); + reg_val &= 0x00ffffff; + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val); + + /* Disable fast lock */ + vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610); + + /* Set idtafcrecal before PLL is enabled */ + mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK)); + mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT)); + mdiv |= ((bestn << DPIO_N_SHIFT)); + mdiv |= (1 << DPIO_K_SHIFT); + + /* + * Post divider depends on pixel clock rate, DAC vs digital (and LVDS, + * but we don't support that). + * Note: don't use the DAC post divider as it seems unstable. + */ + mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT); + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv); + + mdiv |= DPIO_ENABLE_CALIBRATION; + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv); + + /* Set HBR and RBR LPF coefficients */ + if (pipe_config->port_clock == 162000 || + intel_crtc_has_type(pipe_config, INTEL_OUTPUT_ANALOG) || + intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI)) + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe), + 0x009f0003); + else + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe), + 0x00d0000f); + + if (intel_crtc_has_dp_encoder(pipe_config)) { + /* Use SSC source */ + if (pipe == PIPE_A) + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), + 0x0df40000); + else + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), + 0x0df70000); + } else { /* HDMI or VGA */ + /* Use bend source */ + if (pipe == PIPE_A) + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), + 0x0df70000); + else + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), + 0x0df40000); + } + + coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe)); + coreclk = (coreclk & 0x0000ff00) | 0x01c00000; + if (intel_crtc_has_dp_encoder(pipe_config)) + coreclk |= 0x01000000; + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk); + + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000); + + vlv_dpio_put(dev_priv); +} + +void chv_prepare_pll(struct intel_crtc *crtc, + const struct intel_crtc_state *pipe_config) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + enum pipe pipe = crtc->pipe; + enum dpio_channel port = vlv_pipe_to_channel(pipe); + u32 loopfilter, tribuf_calcntr; + u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac; + u32 dpio_val; + int vco; + + /* Enable Refclk and SSC */ + intel_de_write(dev_priv, DPLL(pipe), + pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE); + + /* No need to actually set up the DPLL with DSI */ + if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0) + return; + + bestn = pipe_config->dpll.n; + bestm2_frac = pipe_config->dpll.m2 & 0x3fffff; + bestm1 = pipe_config->dpll.m1; + bestm2 = pipe_config->dpll.m2 >> 22; + bestp1 = pipe_config->dpll.p1; + bestp2 = pipe_config->dpll.p2; + vco = pipe_config->dpll.vco; + dpio_val = 0; + loopfilter = 0; + + vlv_dpio_get(dev_priv); + + /* p1 and p2 divider */ + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port), + 5 << DPIO_CHV_S1_DIV_SHIFT | + bestp1 << DPIO_CHV_P1_DIV_SHIFT | + bestp2 << DPIO_CHV_P2_DIV_SHIFT | + 1 << DPIO_CHV_K_DIV_SHIFT); + + /* Feedback post-divider - m2 */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2); + + /* Feedback refclk divider - n and m1 */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port), + DPIO_CHV_M1_DIV_BY_2 | + 1 << DPIO_CHV_N_DIV_SHIFT); + + /* M2 fraction division */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac); + + /* M2 fraction division enable */ + dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port)); + dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN); + dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT); + if (bestm2_frac) + dpio_val |= DPIO_CHV_FRAC_DIV_EN; + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val); + + /* Program digital lock detect threshold */ + dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port)); + dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK | + DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE); + dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT); + if (!bestm2_frac) + dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE; + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val); + + /* Loop filter */ + if (vco == 5400000) { + loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT); + loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT); + loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT); + tribuf_calcntr = 0x9; + } else if (vco <= 6200000) { + loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT); + loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT); + loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT); + tribuf_calcntr = 0x9; + } else if (vco <= 6480000) { + loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT); + loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT); + loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT); + tribuf_calcntr = 0x8; + } else { + /* Not supported. Apply the same limits as in the max case */ + loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT); + loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT); + loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT); + tribuf_calcntr = 0; + } + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter); + + dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port)); + dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK; + dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT); + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val); + + /* AFC Recal */ + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), + vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) | + DPIO_AFC_RECAL); + + vlv_dpio_put(dev_priv); +} + +/** + * vlv_force_pll_on - forcibly enable just the PLL + * @dev_priv: i915 private structure + * @pipe: pipe PLL to enable + * @dpll: PLL configuration + * + * Enable the PLL for @pipe using the supplied @dpll config. To be used + * in cases where we need the PLL enabled even when @pipe is not going to + * be enabled. + */ +int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe, + const struct dpll *dpll) +{ + struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe); + struct intel_crtc_state *pipe_config; + + pipe_config = intel_crtc_state_alloc(crtc); + if (!pipe_config) + return -ENOMEM; + + pipe_config->cpu_transcoder = (enum transcoder)pipe; + pipe_config->pixel_multiplier = 1; + pipe_config->dpll = *dpll; + + if (IS_CHERRYVIEW(dev_priv)) { + chv_compute_dpll(crtc, pipe_config); + chv_prepare_pll(crtc, pipe_config); + chv_enable_pll(crtc, pipe_config); + } else { + vlv_compute_dpll(crtc, pipe_config); + vlv_prepare_pll(crtc, pipe_config); + vlv_enable_pll(crtc, pipe_config); + } + + kfree(pipe_config); + + return 0; +} + +void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) +{ + u32 val; + + /* Make sure the pipe isn't still relying on us */ + assert_pipe_disabled(dev_priv, (enum transcoder)pipe); + + val = DPLL_INTEGRATED_REF_CLK_VLV | + DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; + if (pipe != PIPE_A) + val |= DPLL_INTEGRATED_CRI_CLK_VLV; + + intel_de_write(dev_priv, DPLL(pipe), val); + intel_de_posting_read(dev_priv, DPLL(pipe)); +} + +void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) +{ + enum dpio_channel port = vlv_pipe_to_channel(pipe); + u32 val; + + /* Make sure the pipe isn't still relying on us */ + assert_pipe_disabled(dev_priv, (enum transcoder)pipe); + + val = DPLL_SSC_REF_CLK_CHV | + DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; + if (pipe != PIPE_A) + val |= DPLL_INTEGRATED_CRI_CLK_VLV; + + intel_de_write(dev_priv, DPLL(pipe), val); + intel_de_posting_read(dev_priv, DPLL(pipe)); + + vlv_dpio_get(dev_priv); + + /* Disable 10bit clock to display controller */ + val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)); + val &= ~DPIO_DCLKP_EN; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val); + + vlv_dpio_put(dev_priv); +} + +void i9xx_disable_pll(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + + /* Don't disable pipe or pipe PLLs if needed */ + if (IS_I830(dev_priv)) + return; + + /* Make sure the pipe isn't still relying on us */ + assert_pipe_disabled(dev_priv, crtc_state->cpu_transcoder); + + intel_de_write(dev_priv, DPLL(pipe), DPLL_VGA_MODE_DIS); + intel_de_posting_read(dev_priv, DPLL(pipe)); +} + + +/** + * vlv_force_pll_off - forcibly disable just the PLL + * @dev_priv: i915 private structure + * @pipe: pipe PLL to disable + * + * Disable the PLL for @pipe. To be used in cases where we need + * the PLL enabled even when @pipe is not going to be enabled. + */ +void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe) +{ + if (IS_CHERRYVIEW(dev_priv)) + chv_disable_pll(dev_priv, pipe); + else + vlv_disable_pll(dev_priv, pipe); +} |