summaryrefslogtreecommitdiff
path: root/drivers/dma/xilinx/xilinx_dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/dma/xilinx/xilinx_dma.c')
-rw-r--r--drivers/dma/xilinx/xilinx_dma.c170
1 files changed, 100 insertions, 70 deletions
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index cb20b411493e..c43c1a154604 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -86,6 +86,7 @@
#define XILINX_DMA_DMASR_DMA_DEC_ERR BIT(6)
#define XILINX_DMA_DMASR_DMA_SLAVE_ERR BIT(5)
#define XILINX_DMA_DMASR_DMA_INT_ERR BIT(4)
+#define XILINX_DMA_DMASR_SG_MASK BIT(3)
#define XILINX_DMA_DMASR_IDLE BIT(1)
#define XILINX_DMA_DMASR_HALTED BIT(0)
#define XILINX_DMA_DMASR_DELAY_MASK GENMASK(31, 24)
@@ -161,7 +162,9 @@
#define XILINX_DMA_REG_BTT 0x28
/* AXI DMA Specific Masks/Bit fields */
-#define XILINX_DMA_MAX_TRANS_LEN GENMASK(22, 0)
+#define XILINX_DMA_MAX_TRANS_LEN_MIN 8
+#define XILINX_DMA_MAX_TRANS_LEN_MAX 23
+#define XILINX_DMA_V2_MAX_TRANS_LEN_MAX 26
#define XILINX_DMA_CR_COALESCE_MAX GENMASK(23, 16)
#define XILINX_DMA_CR_CYCLIC_BD_EN_MASK BIT(4)
#define XILINX_DMA_CR_COALESCE_SHIFT 16
@@ -412,7 +415,6 @@ struct xilinx_dma_config {
* @dev: Device Structure
* @common: DMA device structure
* @chan: Driver specific DMA channel
- * @has_sg: Specifies whether Scatter-Gather is present or not
* @mcdma: Specifies whether Multi-Channel is present or not
* @flush_on_fsync: Flush on frame sync
* @ext_addr: Indicates 64 bit addressing is supported by dma device
@@ -425,13 +427,13 @@ struct xilinx_dma_config {
* @rxs_clk: DMA s2mm stream clock
* @nr_channels: Number of channels DMA device supports
* @chan_id: DMA channel identifier
+ * @max_buffer_len: Max buffer length
*/
struct xilinx_dma_device {
void __iomem *regs;
struct device *dev;
struct dma_device common;
struct xilinx_dma_chan *chan[XILINX_DMA_MAX_CHANS_PER_DEVICE];
- bool has_sg;
bool mcdma;
u32 flush_on_fsync;
bool ext_addr;
@@ -444,6 +446,7 @@ struct xilinx_dma_device {
struct clk *rxs_clk;
u32 nr_channels;
u32 chan_id;
+ u32 max_buffer_len;
};
/* Macros */
@@ -960,6 +963,34 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
}
/**
+ * xilinx_dma_calc_copysize - Calculate the amount of data to copy
+ * @chan: Driver specific DMA channel
+ * @size: Total data that needs to be copied
+ * @done: Amount of data that has been already copied
+ *
+ * Return: Amount of data that has to be copied
+ */
+static int xilinx_dma_calc_copysize(struct xilinx_dma_chan *chan,
+ int size, int done)
+{
+ size_t copy;
+
+ copy = min_t(size_t, size - done,
+ chan->xdev->max_buffer_len);
+
+ if ((copy + done < size) &&
+ chan->xdev->common.copy_align) {
+ /*
+ * If this is not the last descriptor, make sure
+ * the next one will be properly aligned
+ */
+ copy = rounddown(copy,
+ (1 << chan->xdev->common.copy_align));
+ }
+ return copy;
+}
+
+/**
* xilinx_dma_tx_status - Get DMA transaction status
* @dchan: DMA channel
* @cookie: Transaction identifier
@@ -992,7 +1023,7 @@ static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
list_for_each_entry(segment, &desc->segments, node) {
hw = &segment->hw;
residue += (hw->control - hw->status) &
- XILINX_DMA_MAX_TRANS_LEN;
+ chan->xdev->max_buffer_len;
}
}
spin_unlock_irqrestore(&chan->lock, flags);
@@ -1070,7 +1101,8 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
struct xilinx_vdma_config *config = &chan->config;
struct xilinx_dma_tx_descriptor *desc, *tail_desc;
u32 reg, j;
- struct xilinx_vdma_tx_segment *tail_segment;
+ struct xilinx_vdma_tx_segment *segment, *last = NULL;
+ int i = 0;
/* This function was invoked with lock held */
if (chan->err)
@@ -1087,17 +1119,6 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
tail_desc = list_last_entry(&chan->pending_list,
struct xilinx_dma_tx_descriptor, node);
- tail_segment = list_last_entry(&tail_desc->segments,
- struct xilinx_vdma_tx_segment, node);
-
- /*
- * If hardware is idle, then all descriptors on the running lists are
- * done, start new transfers
- */
- if (chan->has_sg)
- dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC,
- desc->async_tx.phys);
-
/* Configure the hardware using info in the config structure */
if (chan->has_vflip) {
reg = dma_read(chan, XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP);
@@ -1114,15 +1135,11 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
else
reg &= ~XILINX_DMA_DMACR_FRAMECNT_EN;
- /*
- * With SG, start with circular mode, so that BDs can be fetched.
- * In direct register mode, if not parking, enable circular mode
- */
- if (chan->has_sg || !config->park)
- reg |= XILINX_DMA_DMACR_CIRC_EN;
-
+ /* If not parking, enable circular mode */
if (config->park)
reg &= ~XILINX_DMA_DMACR_CIRC_EN;
+ else
+ reg |= XILINX_DMA_DMACR_CIRC_EN;
dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
@@ -1144,48 +1161,38 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
return;
/* Start the transfer */
- if (chan->has_sg) {
- dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
- tail_segment->phys);
- list_splice_tail_init(&chan->pending_list, &chan->active_list);
- chan->desc_pendingcount = 0;
- } else {
- struct xilinx_vdma_tx_segment *segment, *last = NULL;
- int i = 0;
-
- if (chan->desc_submitcount < chan->num_frms)
- i = chan->desc_submitcount;
-
- list_for_each_entry(segment, &desc->segments, node) {
- if (chan->ext_addr)
- vdma_desc_write_64(chan,
- XILINX_VDMA_REG_START_ADDRESS_64(i++),
- segment->hw.buf_addr,
- segment->hw.buf_addr_msb);
- else
- vdma_desc_write(chan,
+ if (chan->desc_submitcount < chan->num_frms)
+ i = chan->desc_submitcount;
+
+ list_for_each_entry(segment, &desc->segments, node) {
+ if (chan->ext_addr)
+ vdma_desc_write_64(chan,
+ XILINX_VDMA_REG_START_ADDRESS_64(i++),
+ segment->hw.buf_addr,
+ segment->hw.buf_addr_msb);
+ else
+ vdma_desc_write(chan,
XILINX_VDMA_REG_START_ADDRESS(i++),
segment->hw.buf_addr);
- last = segment;
- }
+ last = segment;
+ }
- if (!last)
- return;
+ if (!last)
+ return;
- /* HW expects these parameters to be same for one transaction */
- vdma_desc_write(chan, XILINX_DMA_REG_HSIZE, last->hw.hsize);
- vdma_desc_write(chan, XILINX_DMA_REG_FRMDLY_STRIDE,
- last->hw.stride);
- vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);
+ /* HW expects these parameters to be same for one transaction */
+ vdma_desc_write(chan, XILINX_DMA_REG_HSIZE, last->hw.hsize);
+ vdma_desc_write(chan, XILINX_DMA_REG_FRMDLY_STRIDE,
+ last->hw.stride);
+ vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);
- chan->desc_submitcount++;
- chan->desc_pendingcount--;
- list_del(&desc->node);
- list_add_tail(&desc->node, &chan->active_list);
- if (chan->desc_submitcount == chan->num_frms)
- chan->desc_submitcount = 0;
- }
+ chan->desc_submitcount++;
+ chan->desc_pendingcount--;
+ list_del(&desc->node);
+ list_add_tail(&desc->node, &chan->active_list);
+ if (chan->desc_submitcount == chan->num_frms)
+ chan->desc_submitcount = 0;
chan->idle = false;
}
@@ -1254,7 +1261,7 @@ static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
/* Start the transfer */
dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
- hw->control & XILINX_DMA_MAX_TRANS_LEN);
+ hw->control & chan->xdev->max_buffer_len);
}
list_splice_tail_init(&chan->pending_list, &chan->active_list);
@@ -1357,7 +1364,7 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
/* Start the transfer */
dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
- hw->control & XILINX_DMA_MAX_TRANS_LEN);
+ hw->control & chan->xdev->max_buffer_len);
}
list_splice_tail_init(&chan->pending_list, &chan->active_list);
@@ -1718,7 +1725,7 @@ xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
struct xilinx_cdma_tx_segment *segment;
struct xilinx_cdma_desc_hw *hw;
- if (!len || len > XILINX_DMA_MAX_TRANS_LEN)
+ if (!len || len > chan->xdev->max_buffer_len)
return NULL;
desc = xilinx_dma_alloc_tx_descriptor(chan);
@@ -1808,8 +1815,8 @@ static struct dma_async_tx_descriptor *xilinx_dma_prep_slave_sg(
* Calculate the maximum number of bytes to transfer,
* making sure it is less than the hw limit
*/
- copy = min_t(size_t, sg_dma_len(sg) - sg_used,
- XILINX_DMA_MAX_TRANS_LEN);
+ copy = xilinx_dma_calc_copysize(chan, sg_dma_len(sg),
+ sg_used);
hw = &segment->hw;
/* Fill in the descriptor */
@@ -1913,8 +1920,8 @@ static struct dma_async_tx_descriptor *xilinx_dma_prep_dma_cyclic(
* Calculate the maximum number of bytes to transfer,
* making sure it is less than the hw limit
*/
- copy = min_t(size_t, period_len - sg_used,
- XILINX_DMA_MAX_TRANS_LEN);
+ copy = xilinx_dma_calc_copysize(chan, period_len,
+ sg_used);
hw = &segment->hw;
xilinx_axidma_buf(chan, hw, buf_addr, sg_used,
period_len * i);
@@ -2389,7 +2396,6 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
chan->dev = xdev->dev;
chan->xdev = xdev;
- chan->has_sg = xdev->has_sg;
chan->desc_pendingcount = 0x0;
chan->ext_addr = xdev->ext_addr;
/* This variable ensures that descriptors are not
@@ -2489,6 +2495,15 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
chan->stop_transfer = xilinx_dma_stop_transfer;
}
+ /* check if SG is enabled (only for AXIDMA and CDMA) */
+ if (xdev->dma_config->dmatype != XDMA_TYPE_VDMA) {
+ if (dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
+ XILINX_DMA_DMASR_SG_MASK)
+ chan->has_sg = true;
+ dev_dbg(chan->dev, "ch %d: SG %s\n", chan->id,
+ chan->has_sg ? "enabled" : "disabled");
+ }
+
/* Initialize the tasklet */
tasklet_init(&chan->tasklet, xilinx_dma_do_tasklet,
(unsigned long)chan);
@@ -2596,7 +2611,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
struct xilinx_dma_device *xdev;
struct device_node *child, *np = pdev->dev.of_node;
struct resource *io;
- u32 num_frames, addr_width;
+ u32 num_frames, addr_width, len_width;
int i, err;
/* Allocate and initialize the DMA engine structure */
@@ -2627,9 +2642,24 @@ static int xilinx_dma_probe(struct platform_device *pdev)
return PTR_ERR(xdev->regs);
/* Retrieve the DMA engine properties from the device tree */
- xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg");
- if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
+ xdev->max_buffer_len = GENMASK(XILINX_DMA_MAX_TRANS_LEN_MAX - 1, 0);
+
+ if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
xdev->mcdma = of_property_read_bool(node, "xlnx,mcdma");
+ if (!of_property_read_u32(node, "xlnx,sg-length-width",
+ &len_width)) {
+ if (len_width < XILINX_DMA_MAX_TRANS_LEN_MIN ||
+ len_width > XILINX_DMA_V2_MAX_TRANS_LEN_MAX) {
+ dev_warn(xdev->dev,
+ "invalid xlnx,sg-length-width property value. Using default width\n");
+ } else {
+ if (len_width > XILINX_DMA_MAX_TRANS_LEN_MAX)
+ dev_warn(xdev->dev, "Please ensure that IP supports buffer length > 23 bits\n");
+ xdev->max_buffer_len =
+ GENMASK(len_width - 1, 0);
+ }
+ }
+ }
if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
err = of_property_read_u32(node, "xlnx,num-fstores",
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-20 11:40:53 +0300