diff options
Diffstat (limited to 'drivers/crypto')
| -rw-r--r-- | drivers/crypto/bfin_crc.c | 42 | ||||
| -rw-r--r-- | drivers/crypto/bfin_crc.h | 125 |
2 files changed, 150 insertions, 17 deletions
diff --git a/drivers/crypto/bfin_crc.c b/drivers/crypto/bfin_crc.c index c9ff298e6d26..cea3e8c1fdf9 100644 --- a/drivers/crypto/bfin_crc.c +++ b/drivers/crypto/bfin_crc.c @@ -30,9 +30,11 @@ #include <crypto/internal/hash.h> #include <asm/blackfin.h> -#include <asm/bfin_crc.h> #include <asm/dma.h> #include <asm/portmux.h> +#include <asm/io.h> + +#include "bfin_crc.h" #define CRC_CCRYPTO_QUEUE_LENGTH 5 @@ -54,7 +56,7 @@ struct bfin_crypto_crc { int irq; int dma_ch; u32 poly; - volatile struct crc_register *regs; + struct crc_register *regs; struct ahash_request *req; /* current request in operation */ struct dma_desc_array *sg_cpu; /* virt addr of sg dma descriptors */ @@ -132,13 +134,13 @@ static struct scatterlist *sg_get(struct scatterlist *sg_list, unsigned int nent static int bfin_crypto_crc_init_hw(struct bfin_crypto_crc *crc, u32 key) { - crc->regs->datacntrld = 0; - crc->regs->control = MODE_CALC_CRC << OPMODE_OFFSET; - crc->regs->curresult = key; + writel(0, &crc->regs->datacntrld); + writel(MODE_CALC_CRC << OPMODE_OFFSET, &crc->regs->control); + writel(key, &crc->regs->curresult); /* setup CRC interrupts */ - crc->regs->status = CMPERRI | DCNTEXPI; - crc->regs->intrenset = CMPERRI | DCNTEXPI; + writel(CMPERRI | DCNTEXPI, &crc->regs->status); + writel(CMPERRI | DCNTEXPI, &crc->regs->intrenset); return 0; } @@ -303,6 +305,7 @@ static int bfin_crypto_crc_handle_queue(struct bfin_crypto_crc *crc, int nsg, i, j; unsigned int nextlen; unsigned long flags; + u32 reg; spin_lock_irqsave(&crc->lock, flags); if (req) @@ -402,13 +405,14 @@ finish_update: ctx->sg_buflen += CHKSUM_DIGEST_SIZE; /* set CRC data count before start DMA */ - crc->regs->datacnt = ctx->sg_buflen >> 2; + writel(ctx->sg_buflen >> 2, &crc->regs->datacnt); /* setup and enable CRC DMA */ bfin_crypto_crc_config_dma(crc); /* finally kick off CRC operation */ - crc->regs->control |= BLKEN; + reg = readl(&crc->regs->control); + writel(reg | BLKEN, &crc->regs->control); return -EINPROGRESS; } @@ -529,14 +533,17 @@ static void bfin_crypto_crc_done_task(unsigned long data) static irqreturn_t bfin_crypto_crc_handler(int irq, void *dev_id) { struct bfin_crypto_crc *crc = dev_id; + u32 reg; - if (crc->regs->status & DCNTEXP) { - crc->regs->status = DCNTEXP; + if (readl(&crc->regs->status) & DCNTEXP) { + writel(DCNTEXP, &crc->regs->status); /* prepare results */ - put_unaligned_le32(crc->regs->result, crc->req->result); + put_unaligned_le32(readl(&crc->regs->result), + crc->req->result); - crc->regs->control &= ~BLKEN; + reg = readl(&crc->regs->control); + writel(reg & ~BLKEN, &crc->regs->control); crc->busy = 0; if (crc->req->base.complete) @@ -560,7 +567,7 @@ static int bfin_crypto_crc_suspend(struct platform_device *pdev, pm_message_t st struct bfin_crypto_crc *crc = platform_get_drvdata(pdev); int i = 100000; - while ((crc->regs->control & BLKEN) && --i) + while ((readl(&crc->regs->control) & BLKEN) && --i) cpu_relax(); if (i == 0) @@ -648,10 +655,11 @@ static int bfin_crypto_crc_probe(struct platform_device *pdev) */ crc->sg_mid_buf = (u8 *)(crc->sg_cpu + ((CRC_MAX_DMA_DESC + 1) << 1)); - crc->regs->control = 0; - crc->regs->poly = crc->poly = (u32)pdev->dev.platform_data; + writel(0, &crc->regs->control); + crc->poly = (u32)pdev->dev.platform_data; + writel(crc->poly, &crc->regs->poly); - while (!(crc->regs->status & LUTDONE) && (--timeout) > 0) + while (!(readl(&crc->regs->status) & LUTDONE) && (--timeout) > 0) cpu_relax(); if (timeout == 0) diff --git a/drivers/crypto/bfin_crc.h b/drivers/crypto/bfin_crc.h new file mode 100644 index 000000000000..75cef4dc85a1 --- /dev/null +++ b/drivers/crypto/bfin_crc.h @@ -0,0 +1,125 @@ +/* + * bfin_crc.h - interface to Blackfin CRC controllers + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_CRC_H__ +#define __BFIN_CRC_H__ + +/* Function driver which use hardware crc must initialize the structure */ +struct crc_info { + /* Input data address */ + unsigned char *in_addr; + /* Output data address */ + unsigned char *out_addr; + /* Input or output bytes */ + unsigned long datasize; + union { + /* CRC to compare with that of input buffer */ + unsigned long crc_compare; + /* Value to compare with input data */ + unsigned long val_verify; + /* Value to fill */ + unsigned long val_fill; + }; + /* Value to program the 32b CRC Polynomial */ + unsigned long crc_poly; + union { + /* CRC calculated from the input data */ + unsigned long crc_result; + /* First failed position to verify input data */ + unsigned long pos_verify; + }; + /* CRC mirror flags */ + unsigned int bitmirr:1; + unsigned int bytmirr:1; + unsigned int w16swp:1; + unsigned int fdsel:1; + unsigned int rsltmirr:1; + unsigned int polymirr:1; + unsigned int cmpmirr:1; +}; + +/* Userspace interface */ +#define CRC_IOC_MAGIC 'C' +#define CRC_IOC_CALC_CRC _IOWR('C', 0x01, unsigned int) +#define CRC_IOC_MEMCPY_CRC _IOWR('C', 0x02, unsigned int) +#define CRC_IOC_VERIFY_VAL _IOWR('C', 0x03, unsigned int) +#define CRC_IOC_FILL_VAL _IOWR('C', 0x04, unsigned int) + + +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/miscdevice.h> + +struct crc_register { + u32 control; + u32 datacnt; + u32 datacntrld; + u32 __pad_1[2]; + u32 compare; + u32 fillval; + u32 datafifo; + u32 intren; + u32 intrenset; + u32 intrenclr; + u32 poly; + u32 __pad_2[4]; + u32 status; + u32 datacntcap; + u32 __pad_3; + u32 result; + u32 curresult; + u32 __pad_4[3]; + u32 revid; +}; + +/* CRC_STATUS Masks */ +#define CMPERR 0x00000002 /* Compare error */ +#define DCNTEXP 0x00000010 /* datacnt register expired */ +#define IBR 0x00010000 /* Input buffer ready */ +#define OBR 0x00020000 /* Output buffer ready */ +#define IRR 0x00040000 /* Immediate result readt */ +#define LUTDONE 0x00080000 /* Look-up table generation done */ +#define FSTAT 0x00700000 /* FIFO status */ +#define MAX_FIFO 4 /* Max fifo size */ + +/* CRC_CONTROL Masks */ +#define BLKEN 0x00000001 /* Block enable */ +#define OPMODE 0x000000F0 /* Operation mode */ +#define OPMODE_OFFSET 4 /* Operation mode mask offset*/ +#define MODE_DMACPY_CRC 1 /* MTM CRC compute and compare */ +#define MODE_DATA_FILL 2 /* MTM data fill */ +#define MODE_CALC_CRC 3 /* MSM CRC compute and compare */ +#define MODE_DATA_VERIFY 4 /* MSM data verify */ +#define AUTOCLRZ 0x00000100 /* Auto clear to zero */ +#define AUTOCLRF 0x00000200 /* Auto clear to one */ +#define OBRSTALL 0x00001000 /* Stall on output buffer ready */ +#define IRRSTALL 0x00002000 /* Stall on immediate result ready */ +#define BITMIRR 0x00010000 /* Mirror bits within each byte of 32-bit input data */ +#define BITMIRR_OFFSET 16 /* Mirror bits offset */ +#define BYTMIRR 0x00020000 /* Mirror bytes of 32-bit input data */ +#define BYTMIRR_OFFSET 17 /* Mirror bytes offset */ +#define W16SWP 0x00040000 /* Mirror uppper and lower 16-bit word of 32-bit input data */ +#define W16SWP_OFFSET 18 /* Mirror 16-bit word offset */ +#define FDSEL 0x00080000 /* FIFO is written after input data is mirrored */ +#define FDSEL_OFFSET 19 /* Mirror FIFO offset */ +#define RSLTMIRR 0x00100000 /* CRC result registers are mirrored. */ +#define RSLTMIRR_OFFSET 20 /* Mirror CRC result offset. */ +#define POLYMIRR 0x00200000 /* CRC poly register is mirrored. */ +#define POLYMIRR_OFFSET 21 /* Mirror CRC poly offset. */ +#define CMPMIRR 0x00400000 /* CRC compare register is mirrored. */ +#define CMPMIRR_OFFSET 22 /* Mirror CRC compare offset. */ + +/* CRC_INTREN Masks */ +#define CMPERRI 0x02 /* CRC_ERROR_INTR */ +#define DCNTEXPI 0x10 /* CRC_STATUS_INTR */ + +#endif + +#endif |