diff options
Diffstat (limited to 'arch')
59 files changed, 3147 insertions, 586 deletions
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig index da53ff3b4d70..cd40bb56e568 100644 --- a/arch/arm/configs/exynos4_defconfig +++ b/arch/arm/configs/exynos4_defconfig @@ -11,6 +11,7 @@ CONFIG_MACH_SMDKV310=y CONFIG_MACH_ARMLEX4210=y CONFIG_MACH_UNIVERSAL_C210=y CONFIG_MACH_NURI=y +CONFIG_MACH_ORIGEN=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index db2cb7d180dc..6ee781bf6bf1 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -26,6 +26,7 @@ CONFIG_MACH_MX23EVK=y CONFIG_MACH_MX28EVK=y CONFIG_MACH_STMP378X_DEVB=y CONFIG_MACH_TX28=y +CONFIG_MACH_M28EVK=y # CONFIG_ARM_THUMB is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 22484670e7ba..04a85c546abc 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -182,6 +182,11 @@ config MACH_ECO920 help Select this if you are using the eco920 board +config MACH_RSI_EWS + bool "RSI Embedded Webserver" + depends on ARCH_AT91RM9200 + help + Select this if you are using RSIs EWS board. endif # ---------------------------------------------------------- @@ -381,6 +386,14 @@ config MACH_GSIA18S This enables support for the GS_IA18_S board produced by GeoSIG Ltd company. This is an internet accelerograph. <http://www.geosig.com> + +config MACH_USB_A9G20 + bool "CALAO USB-A9G20" + depends on ARCH_AT91SAM9G20 + help + Select this if you are using a Calao Systems USB-A9G20. + <http://www.calao-systems.com> + endif if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index bf57e8b1c9d0..d992dd5d9321 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -36,12 +36,13 @@ obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o obj-$(CONFIG_MACH_ECO920) += board-eco920.o +obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o obj-$(CONFIG_MACH_CAM60) += board-cam60.o obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o -obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o +obj-$(CONFIG_MACH_USB_A9260) += board-usb-a926x.o obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o @@ -53,7 +54,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o # AT91SAM9263 board-specific support obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o -obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o +obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o # AT91SAM9RL board-specific support @@ -67,6 +68,7 @@ obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o +obj-$(CONFIG_MACH_USB_A9G20) += board-usb-a926x.o # AT91SAM9260/AT91SAM9G20 board-specific support obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c new file mode 100644 index 000000000000..e927df0175df --- /dev/null +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -0,0 +1,233 @@ +/* + * board-rsi-ews.c + * + * Copyright (C) + * 2005 SAN People, + * 2008-2011 R-S-I Elektrotechnik GmbH & Co. KG + * + * Licensed under GPLv2 or later. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/mtd/physmap.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/board.h> + +#include <linux/gpio.h> + +#include "generic.h" + +static void __init rsi_ews_init_early(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91_initialize(18432000); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9); + + /* DBGU on ttyS0. (Rx & Tx only) */ + /* This one is for debugging */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + /* Dialin/-out modem interface */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART3 on ttyS4. (Rx, Tx, RTS) */ + /* RS485 communication */ + at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +/* + * Ethernet + */ +static struct at91_eth_data rsi_ews_eth_data __initdata = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +/* + * USB Host + */ +static struct at91_usbh_data rsi_ews_usbh_data __initdata = { + .ports = 1, +}; + +/* + * SD/MC + */ +static struct at91_mmc_data rsi_ews_mmc_data __initdata = { + .slot_b = 0, + .wire4 = 1, + .det_pin = AT91_PIN_PB27, + .wp_pin = AT91_PIN_PB29, +}; + +/* + * I2C + */ +static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = { + { + I2C_BOARD_INFO("ds1337", 0x68), + }, + { + I2C_BOARD_INFO("24c01", 0x50), + } +}; + +/* + * LEDs + */ +static struct gpio_led rsi_ews_leds[] = { + { + .name = "led0", + .gpio = AT91_PIN_PB6, + .active_low = 0, + }, + { + .name = "led1", + .gpio = AT91_PIN_PB7, + .active_low = 0, + }, + { + .name = "led2", + .gpio = AT91_PIN_PB8, + .active_low = 0, + }, + { + .name = "led3", + .gpio = AT91_PIN_PB9, + .active_low = 0, + }, +}; + +/* + * DataFlash + */ +static struct spi_board_info rsi_ews_spi_devices[] = { + { /* DataFlash chip 1*/ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 5 * 1000 * 1000, + }, + { /* DataFlash chip 2*/ + .modalias = "mtd_dataflash", + .chip_select = 1, + .max_speed_hz = 5 * 1000 * 1000, + }, +}; + +/* + * NOR flash + */ +static struct mtd_partition rsiews_nor_partitions[] = { + { + .name = "boot", + .offset = 0, + .size = 3 * SZ_128K, + .mask_flags = MTD_WRITEABLE + }, + { + .name = "kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_2M - (3 * SZ_128K) + }, + { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_8M + }, + { + .name = "kernelupd", + .offset = MTDPART_OFS_NXTBLK, + .size = 3 * SZ_512K, + .mask_flags = MTD_WRITEABLE + }, + { + .name = "rootupd", + .offset = MTDPART_OFS_NXTBLK, + .size = 9 * SZ_512K, + .mask_flags = MTD_WRITEABLE + }, +}; + +static struct physmap_flash_data rsiews_nor_data = { + .width = 2, + .parts = rsiews_nor_partitions, + .nr_parts = ARRAY_SIZE(rsiews_nor_partitions), +}; + +#define NOR_BASE AT91_CHIPSELECT_0 +#define NOR_SIZE SZ_16M + +static struct resource nor_flash_resources[] = { + { + .start = NOR_BASE, + .end = NOR_BASE + NOR_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device rsiews_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &rsiews_nor_data, + }, + .resource = nor_flash_resources, + .num_resources = ARRAY_SIZE(nor_flash_resources), +}; + +/* + * Init Func + */ +static void __init rsi_ews_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + at91_set_gpio_output(AT91_PIN_PA21, 0); + /* Ethernet */ + at91_add_device_eth(&rsi_ews_eth_data); + /* USB Host */ + at91_add_device_usbh(&rsi_ews_usbh_data); + /* I2C */ + at91_add_device_i2c(rsi_ews_i2c_devices, + ARRAY_SIZE(rsi_ews_i2c_devices)); + /* SPI */ + at91_add_device_spi(rsi_ews_spi_devices, + ARRAY_SIZE(rsi_ews_spi_devices)); + /* MMC */ + at91_add_device_mmc(0, &rsi_ews_mmc_data); + /* NOR Flash */ + platform_device_register(&rsiews_nor_flash); + /* LEDs */ + at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds)); +} + +MACHINE_START(RSI_EWS, "RSI EWS") + /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */ + .timer = &at91rm9200_timer, + .map_io = at91_map_io, + .init_early = rsi_ews_init_early, + .init_irq = at91_init_irq_default, + .init_machine = rsi_ews_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c deleted file mode 100644 index bac9b65cf551..000000000000 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-usb-a9260.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * Copyright (C) 2007 Calao-systems - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/clk.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 12.000 MHz crystal */ - at91_initialize(12000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = 0, /* pull-up driven by UDC */ -}; - -/* - * MACB Ethernet device - */ -static struct at91_eth_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PA31, - .is_rmii = 1, -}; - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Uboot & Kernel", - .offset = 0, - .size = SZ_16M, - }, - { - .name = "Root FS", - .offset = MTDPART_OFS_NXTBLK, - .size = 120 * SZ_1M, - }, - { - .name = "FS", - .offset = MTDPART_OFS_NXTBLK, - .size = 120 * SZ_1M, - } -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, -// .det_pin = ... not connected - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .partition_info = nand_partitions, -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static void __init ek_add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - -/* - * GPIO Buttons - */ - -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { /* USER PUSH BUTTON */ - .code = KEY_ENTER, - .gpio = AT91_PIN_PB10, - .active_low = 1, - .desc = "user_pb", - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */ - at91_set_deglitch(AT91_PIN_PB10, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* user_led (green) */ - .name = "user_led", - .gpio = AT91_PIN_PB21, - .active_low = 0, - .default_trigger = "heartbeat", - } -}; - -static void __init ek_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* NAND */ - ek_add_device_nand(); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* Ethernet */ - at91_add_device_eth(&ek_macb_data); - /* Push Buttons */ - ek_add_device_buttons(); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* shutdown controller, wakeup button (5 msec low) */ - at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW - | AT91_SHDW_RTTWKEN); -} - -MACHINE_START(USB_A9260, "CALAO USB_A9260") - /* Maintainer: calao-systems */ - .timer = &at91sam926x_timer, - .map_io = at91_map_io, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a926x.c index 5bd735787d6d..5852d3d9890c 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -1,9 +1,10 @@ /* - * linux/arch/arm/mach-at91/board-usb-a9263.c + * linux/arch/arm/mach-at91/board-usb-a926x.c * * Copyright (C) 2005 SAN People * Copyright (C) 2007 Atmel Corporation. * Copyright (C) 2007 Calao-systems + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,14 +22,15 @@ */ #include <linux/types.h> -#include <linux/gpio.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/gpio_keys.h> +#include <linux/gpio.h> #include <linux/input.h> +#include <linux/spi/mmc_spi.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -74,10 +76,42 @@ static struct at91_udc_data __initdata ek_udc_data = { .pullup_pin = 0, /* pull-up driven by UDC */ }; +static void __init ek_add_device_udc(void) +{ + if (machine_is_usb_a9260() || machine_is_usb_a9g20()) + ek_udc_data.vbus_pin = AT91_PIN_PC5; + + at91_add_device_udc(&ek_udc_data); +} + +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4 +static int at91_mmc_spi_init(struct device *dev, + irqreturn_t (*detect_int)(int, void *), void *data) +{ + /* Configure Interrupt pin as input, no pull-up */ + at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0); + return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "mmc-spi-detect", data); +} + +static void at91_mmc_spi_exit(struct device *dev, void *data) +{ + free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data); +} + +static struct mmc_spi_platform_data at91_mmc_spi_pdata = { + .init = at91_mmc_spi_init, + .exit = at91_mmc_spi_exit, + .detect_delay = 100, /* msecs */ +}; +#endif + /* * SPI devices. */ -static struct spi_board_info ek_spi_devices[] = { +static struct spi_board_info usb_a9263_spi_devices[] = { #if !defined(CONFIG_MMC_AT91) { /* DataFlash chip */ .modalias = "mtd_dataflash", @@ -88,6 +122,27 @@ static struct spi_board_info ek_spi_devices[] = { #endif }; +static struct spi_board_info usb_a9g20_spi_devices[] = { +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) + { + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 0, + .platform_data = &at91_mmc_spi_pdata, + .mode = SPI_MODE_3, + }, +#endif +}; + +static void __init ek_add_device_spi(void) +{ + if (machine_is_usb_a9263()) + at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices)); + else if (machine_is_usb_a9g20()) + at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices)); +} + /* * MACB Ethernet device */ @@ -96,24 +151,42 @@ static struct at91_eth_data __initdata ek_macb_data = { .is_rmii = 1, }; +static void __init ek_add_device_eth(void) +{ + if (machine_is_usb_a9260() || machine_is_usb_a9g20()) + ek_macb_data.phy_irq_pin = AT91_PIN_PA31; + + at91_add_device_eth(&ek_macb_data); +} + /* * NAND flash */ static struct mtd_partition __initdata ek_nand_partition[] = { { - .name = "Linux Kernel", + .name = "barebox", .offset = 0, - .size = SZ_16M, - }, - { - .name = "Root FS", + .size = 3 * SZ_128K, + }, { + .name = "bareboxenv", .offset = MTDPART_OFS_NXTBLK, - .size = 120 * SZ_1M, - }, - { - .name = "FS", + .size = SZ_128K, + }, { + .name = "bareboxenv2", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_128K, + }, { + .name = "kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = 4 * SZ_1M, + }, { + .name = "rootfs", .offset = MTDPART_OFS_NXTBLK, .size = 120 * SZ_1M, + }, { + .name = "data", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, } }; @@ -132,7 +205,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .partition_info = nand_partitions, }; -static struct sam9_smc_config __initdata ek_nand_smc_config = { +static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = { .ncs_read_setup = 0, .nrd_setup = 1, .ncs_write_setup = 0, @@ -150,10 +223,36 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { .tdf_cycles = 2, }; +static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 2, + .ncs_write_setup = 0, + .nwe_setup = 2, + + .ncs_read_pulse = 4, + .nrd_pulse = 4, + .ncs_write_pulse = 4, + .nwe_pulse = 4, + + .read_cycle = 7, + .write_cycle = 7, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, + .tdf_cycles = 3, +}; + static void __init ek_add_device_nand(void) { + if (machine_is_usb_a9260() || machine_is_usb_a9g20()) { + ek_nand_data.rdy_pin = AT91_PIN_PC13; + ek_nand_data.enable_pin = AT91_PIN_PC14; + } + /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &ek_nand_smc_config); + if (machine_is_usb_a9g20()) + sam9_smc_configure(3, &usb_a9g20_nand_smc_config); + else + sam9_smc_configure(3, &usb_a9260_nand_smc_config); at91_add_device_nand(&ek_nand_data); } @@ -210,6 +309,19 @@ static struct gpio_led ek_leds[] = { } }; +static struct i2c_board_info __initdata ek_i2c_devices[] = { + { + I2C_BOARD_INFO("rv3029c2", 0x56), + }, +}; + +static void __init ek_add_device_leds(void) +{ + if (machine_is_usb_a9260() || machine_is_usb_a9g20()) + ek_leds[0].active_low = 0; + + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); +} static void __init ek_board_init(void) { @@ -218,22 +330,29 @@ static void __init ek_board_init(void) /* USB Host */ at91_add_device_usbh(&ek_usbh_data); /* USB Device */ - at91_add_device_udc(&ek_udc_data); + ek_add_device_udc(); /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); + ek_add_device_spi(); /* Ethernet */ - at91_add_device_eth(&ek_macb_data); + ek_add_device_eth(); /* NAND */ ek_add_device_nand(); - /* I2C */ - at91_add_device_i2c(NULL, 0); /* Push Buttons */ ek_add_device_buttons(); /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* shutdown controller, wakeup button (5 msec low) */ - at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW + ek_add_device_leds(); + + if (machine_is_usb_a9g20()) { + /* I2C */ + at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); + } else { + /* I2C */ + at91_add_device_i2c(NULL, 0); + /* shutdown controller, wakeup button (5 msec low) */ + at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) + | AT91_SHDW_WKMODE0_LOW | AT91_SHDW_RTTWKEN); + } } MACHINE_START(USB_A9263, "CALAO USB_A9263") @@ -244,3 +363,21 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263") .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END + +MACHINE_START(USB_A9260, "CALAO USB_A9260") + /* Maintainer: calao-systems */ + .timer = &at91sam926x_timer, + .map_io = at91_map_io, + .init_early = ek_init_early, + .init_irq = at91_init_irq_default, + .init_machine = ek_board_init, +MACHINE_END + +MACHINE_START(USB_A9G20, "CALAO USB_A92G0") + /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */ + .timer = &at91sam926x_timer, + .map_io = at91_map_io, + .init_early = ek_init_early, + .init_irq = at91_init_irq_default, + .init_machine = ek_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h index 31ac2d97f14c..85820ad801cc 100644 --- a/arch/arm/mach-at91/include/mach/timex.h +++ b/arch/arm/mach-at91/include/mach/timex.h @@ -64,7 +64,12 @@ #elif defined(CONFIG_ARCH_AT91SAM9G20) +#if defined(CONFIG_MACH_USB_A9G20) +#define AT91SAM9_MASTER_CLOCK 133000000 +#else #define AT91SAM9_MASTER_CLOCK 132096000 +#endif + #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) #elif defined(CONFIG_ARCH_AT91SAM9G45) diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 3a08b18f6433..97a249395b5a 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -182,6 +182,13 @@ config MACH_TS72XX Say 'Y' here if you want your kernel to support the Technologic Systems TS-72xx board. +config MACH_VISION_EP9307 + bool "Support Vision Engraving Systems EP9307 SoM" + depends on EP93XX_SDCE0_PHYS_OFFSET + help + Say 'Y' here if you want your kernel to support the + Vision Engraving Systems EP9307 SoM. + choice prompt "Select a UART for early kernel messages" diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 3cedcf2d39e5..574209d9e246 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_MACH_MICRO9) += micro9.o obj-$(CONFIG_MACH_SIM_ONE) += simone.o obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o obj-$(CONFIG_MACH_TS72XX) += ts72xx.o +obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c new file mode 100644 index 000000000000..d96e4dbec6a8 --- /dev/null +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -0,0 +1,364 @@ +/* + * arch/arm/mach-ep93xx/vision_ep9307.c + * Vision Engraving Systems EP9307 SoM support. + * + * Copyright (C) 2008-2011 Vision Engraving Systems + * H Hartley Sweeten <hsweeten@visionengravers.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/fb.h> +#include <linux/io.h> +#include <linux/mtd/partitions.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/i2c/pca953x.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/spi/mmc_spi.h> +#include <linux/mmc/host.h> + +#include <mach/hardware.h> +#include <mach/fb.h> +#include <mach/ep93xx_spi.h> + +#include <asm/mach-types.h> +#include <asm/mach/map.h> +#include <asm/mach/arch.h> + +/************************************************************************* + * Static I/O mappings for the FPGA + *************************************************************************/ +#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE +#define VISION_VIRT_BASE 0xfebff000 + +static struct map_desc vision_io_desc[] __initdata = { + { + .virtual = VISION_VIRT_BASE, + .pfn = __phys_to_pfn(VISION_PHYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init vision_map_io(void) +{ + ep93xx_map_io(); + + iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc)); +} + +/************************************************************************* + * Ethernet + *************************************************************************/ +static struct ep93xx_eth_data vision_eth_data __initdata = { + .phy_id = 1, +}; + +/************************************************************************* + * Framebuffer + *************************************************************************/ +#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1 + +static int vision_lcd_setup(struct platform_device *pdev) +{ + int err; + + err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH, + dev_name(&pdev->dev)); + if (err) + return err; + + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS | + EP93XX_SYSCON_DEVCFG_RASONP3 | + EP93XX_SYSCON_DEVCFG_EXVC); + + return 0; +} + +static void vision_lcd_teardown(struct platform_device *pdev) +{ + gpio_free(VISION_LCD_ENABLE); +} + +static void vision_lcd_blank(int blank_mode, struct fb_info *info) +{ + if (blank_mode) + gpio_set_value(VISION_LCD_ENABLE, 0); + else + gpio_set_value(VISION_LCD_ENABLE, 1); +} + +static struct ep93xxfb_mach_info ep93xxfb_info __initdata = { + .num_modes = EP93XXFB_USE_MODEDB, + .bpp = 16, + .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, + .setup = vision_lcd_setup, + .teardown = vision_lcd_teardown, + .blank = vision_lcd_blank, +}; + + +/************************************************************************* + * GPIO Expanders + *************************************************************************/ +#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1) +#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16) +#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16) +#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16) + +static struct pca953x_platform_data pca953x_74_gpio_data = { + .gpio_base = PCA9539_74_GPIO_BASE, + .irq_base = EP93XX_BOARD_IRQ(0), +}; + +static struct pca953x_platform_data pca953x_75_gpio_data = { + .gpio_base = PCA9539_75_GPIO_BASE, + .irq_base = -1, +}; + +static struct pca953x_platform_data pca953x_76_gpio_data = { + .gpio_base = PCA9539_76_GPIO_BASE, + .irq_base = -1, +}; + +static struct pca953x_platform_data pca953x_77_gpio_data = { + .gpio_base = PCA9539_77_GPIO_BASE, + .irq_base = -1, +}; + +/************************************************************************* + * I2C Bus + *************************************************************************/ +static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = { + .sda_pin = EP93XX_GPIO_LINE_EEDAT, + .scl_pin = EP93XX_GPIO_LINE_EECLK, +}; + +static struct i2c_board_info vision_i2c_info[] __initdata = { + { + I2C_BOARD_INFO("isl1208", 0x6f), + .irq = IRQ_EP93XX_EXT1, + }, { + I2C_BOARD_INFO("pca9539", 0x74), + .platform_data = &pca953x_74_gpio_data, + .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)), + }, { + I2C_BOARD_INFO("pca9539", 0x75), + .platform_data = &pca953x_75_gpio_data, + }, { + I2C_BOARD_INFO("pca9539", 0x76), + .platform_data = &pca953x_76_gpio_data, + }, { + I2C_BOARD_INFO("pca9539", 0x77), + .platform_data = &pca953x_77_gpio_data, + }, +}; + +/************************************************************************* + * SPI Flash + *************************************************************************/ +#define VISION_SPI_FLASH_CS EP93XX_GPIO_LINE_EGPIO7 + +static struct mtd_partition vision_spi_flash_partitions[] = { + { + .name = "SPI bootstrap", + .offset = 0, + .size = SZ_4K, + }, { + .name = "Bootstrap config", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4K, + }, { + .name = "System config", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data vision_spi_flash_data = { + .name = "SPI Flash", + .parts = vision_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions), +}; + +static int vision_spi_flash_hw_setup(struct spi_device *spi) +{ + return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH, + spi->modalias); +} + +static void vision_spi_flash_hw_cleanup(struct spi_device *spi) +{ + gpio_free(VISION_SPI_FLASH_CS); +} + +static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value) +{ + gpio_set_value(VISION_SPI_FLASH_CS, value); +} + +static struct ep93xx_spi_chip_ops vision_spi_flash_hw = { + .setup = vision_spi_flash_hw_setup, + .cleanup = vision_spi_flash_hw_cleanup, + .cs_control = vision_spi_flash_hw_cs_control, +}; + +/************************************************************************* + * SPI SD/MMC host + *************************************************************************/ +#define VISION_SPI_MMC_CS EP93XX_GPIO_LINE_G(2) +#define VISION_SPI_MMC_WP EP93XX_GPIO_LINE_F(0) +#define VISION_SPI_MMC_CD EP93XX_GPIO_LINE_EGPIO15 + +static struct gpio vision_spi_mmc_gpios[] = { + { VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" }, + { VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" }, +}; + +static int vision_spi_mmc_init(struct device *pdev, + irqreturn_t (*func)(int, void *), void *pdata) +{ + int err; + + err = gpio_request_array(vision_spi_mmc_gpios, + ARRAY_SIZE(vision_spi_mmc_gpios)); + if (err) + return err; + + err = gpio_set_debounce(VISION_SPI_MMC_CD, 1); + if (err) + goto exit_err; + + err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func, + IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata); + if (err) + goto exit_err; + + return 0; + +exit_err: + gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios)); + return err; + +} + +static void vision_spi_mmc_exit(struct device *pdev, void *pdata) +{ + free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata); + gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios)); +} + +static int vision_spi_mmc_get_ro(struct device *pdev) +{ + return !!gpio_get_value(VISION_SPI_MMC_WP); +} + +static int vision_spi_mmc_get_cd(struct device *pdev) +{ + return !gpio_get_value(VISION_SPI_MMC_CD); +} + +static struct mmc_spi_platform_data vision_spi_mmc_data = { + .init = vision_spi_mmc_init, + .exit = vision_spi_mmc_exit, + .get_ro = vision_spi_mmc_get_ro, + .get_cd = vision_spi_mmc_get_cd, + .detect_delay = 100, + .powerup_msecs = 100, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, +}; + +static int vision_spi_mmc_hw_setup(struct spi_device *spi) +{ + return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH, + spi->modalias); +} + +static void vision_spi_mmc_hw_cleanup(struct spi_device *spi) +{ + gpio_free(VISION_SPI_MMC_CS); +} + +static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value) +{ + gpio_set_value(VISION_SPI_MMC_CS, value); +} + +static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = { + .setup = vision_spi_mmc_hw_setup, + .cleanup = vision_spi_mmc_hw_cleanup, + .cs_control = vision_spi_mmc_hw_cs_control, +}; + +/************************************************************************* + * SPI Bus + *************************************************************************/ +static struct spi_board_info vision_spi_board_info[] __initdata = { + { + .modalias = "sst25l", + .platform_data = &vision_spi_flash_data, + .controller_data = &vision_spi_flash_hw, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_3, + }, { + .modalias = "mmc_spi", + .platform_data = &vision_spi_mmc_data, + .controller_data = &vision_spi_mmc_hw, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_3, + }, +}; + +static struct ep93xx_spi_info vision_spi_master __initdata = { + .num_chipselect = ARRAY_SIZE(vision_spi_board_info), +}; + +/************************************************************************* + * Machine Initialization + *************************************************************************/ +static void __init vision_init_machine(void) +{ + ep93xx_init_devices(); + ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M); + ep93xx_register_eth(&vision_eth_data, 1); + ep93xx_register_fb(&ep93xxfb_info); + ep93xx_register_pwm(1, 0); + + /* + * Request the gpio expander's interrupt gpio line now to prevent + * the kernel from doing a WARN in gpiolib:gpio_ensure_requested(). + */ + if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN, + "pca9539:74")) + pr_warn("cannot request interrupt gpio for pca9539:74\n"); + + ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, + ARRAY_SIZE(vision_i2c_info)); + ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, + ARRAY_SIZE(vision_spi_board_info)); +} + +MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") + /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ + .atag_offset = 0x100, + .map_io = vision_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = vision_init_machine, +MACHINE_END diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 1760ee73fbf8..a65273598036 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -16,6 +16,16 @@ config CPU_EXYNOS4210 help Enable EXYNOS4210 CPU support +config SOC_EXYNOS4212 + bool + help + Enable EXYNOS4212 SoC support + +config SOC_EXYNOS4412 + bool + help + Enable EXYNOS4412 SoC support + config EXYNOS4_MCT bool default y @@ -112,6 +122,8 @@ config EXYNOS4_SETUP_USB_PHY menu "EXYNOS4 Machines" +comment "EXYNOS4210 Boards" + config MACH_SMDKC210 bool "SMDKC210" select MACH_SMDKV310 @@ -204,6 +216,48 @@ config MACH_NURI help Machine support for Samsung Mobile NURI Board. +config MACH_ORIGEN + bool "ORIGEN" + select CPU_EXYNOS4210 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_HSMMC2 + select EXYNOS4_SETUP_SDHCI + help + Machine support for ORIGEN based on Samsung EXYNOS4210 + +comment "EXYNOS4212 Boards" + +config MACH_SMDK4212 + bool "SMDK4212" + select SOC_EXYNOS4212 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C3 + select S3C_DEV_I2C7 + select S3C_DEV_RTC + select S3C_DEV_WDT + select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 + select EXYNOS4_SETUP_I2C7 + select EXYNOS4_SETUP_KEYPAD + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung SMDK4212 + +comment "EXYNOS4412 Boards" + +config MACH_SMDK4412 + bool "SMDK4412" + select SOC_EXYNOS4412 + select MACH_SMDK4212 + help + Machine support for Samsung SMDK4412 + endmenu comment "Configuration for HSMMC bus width" diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index e3e93ea41385..c9b2e1f97e44 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -12,8 +12,10 @@ obj- := # Core support for EXYNOS4 system -obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o +obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o +obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o irq-eint.o dma.o pmu.o +obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o +obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o @@ -30,6 +32,10 @@ obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o obj-$(CONFIG_MACH_NURI) += mach-nuri.o +obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o + +obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o +obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o # device support diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos4/clock-exynos4210.c new file mode 100644 index 000000000000..b9d5ef670eb4 --- /dev/null +++ b/arch/arm/mach-exynos4/clock-exynos4210.c @@ -0,0 +1,139 @@ +/* + * linux/arch/arm/mach-exynos4/clock-exynos4210.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4210 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/exynos4.h> +#include <plat/pm.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/exynos4-clock.h> + +static struct sleep_save exynos4210_clock_save[] = { + SAVE_ITEM(S5P_CLKSRC_IMAGE), + SAVE_ITEM(S5P_CLKSRC_LCD1), + SAVE_ITEM(S5P_CLKDIV_IMAGE), + SAVE_ITEM(S5P_CLKDIV_LCD1), + SAVE_ITEM(S5P_CLKSRC_MASK_LCD1), + SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210), + SAVE_ITEM(S5P_CLKGATE_IP_LCD1), + SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), +}; + +static struct clksrc_clk *sysclks[] = { + /* nothing here yet */ +}; + +static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); +} + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "sclk_sata", + .id = -1, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_mout_corebus, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .devname = "exynos4-fb.1", + .enable = exynos4_clksrc_mask_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, + }, +}; + +static struct clk init_clocks_off[] = { + { + .name = "sataphy", + .id = -1, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "sata", + .id = -1, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "fimd", + .devname = "exynos4-fb.1", + .enable = exynos4_clk_ip_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, +}; + +#ifdef CONFIG_PM_SLEEP +static int exynos4210_clock_suspend(void) +{ + s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save)); + + return 0; +} + +static void exynos4210_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save)); +} + +#else +#define exynos4210_clock_suspend NULL +#define exynos4210_clock_resume NULL +#endif + +struct syscore_ops exynos4210_clock_syscore_ops = { + .suspend = exynos4210_clock_suspend, + .resume = exynos4210_clock_resume, +}; + +void __init exynos4210_register_clocks(void) +{ + int ptr; + + clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU; + clk_mout_mpll.reg_src.shift = 8; + clk_mout_mpll.reg_src.size = 1; + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + register_syscore_ops(&exynos4210_clock_syscore_ops); +} diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos4/clock-exynos4212.c new file mode 100644 index 000000000000..77d5decb34fd --- /dev/null +++ b/arch/arm/mach-exynos4/clock-exynos4212.c @@ -0,0 +1,118 @@ +/* + * linux/arch/arm/mach-exynos4/clock-exynos4212.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4212 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/exynos4.h> +#include <plat/pm.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/exynos4-clock.h> + +static struct sleep_save exynos4212_clock_save[] = { + SAVE_ITEM(S5P_CLKSRC_IMAGE), + SAVE_ITEM(S5P_CLKDIV_IMAGE), + SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), + SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), +}; + +static struct clk *clk_src_mpll_user_list[] = { + [0] = &clk_fin_mpll, + [1] = &clk_mout_mpll.clk, +}; + +static struct clksrc_sources clk_src_mpll_user = { + .sources = clk_src_mpll_user_list, + .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list), +}; + +static struct clksrc_clk clk_mout_mpll_user = { + .clk = { + .name = "mout_mpll_user", + }, + .sources = &clk_src_mpll_user, + .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 }, +}; + +static struct clksrc_clk *sysclks[] = { + &clk_mout_mpll_user, +}; + +static struct clksrc_clk clksrcs[] = { + /* nothing here yet */ +}; + +static struct clk init_clocks_off[] = { + /* nothing here yet */ +}; + +#ifdef CONFIG_PM_SLEEP +static int exynos4212_clock_suspend(void) +{ + s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save)); + + return 0; +} + +static void exynos4212_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save)); +} + +#else +#define exynos4212_clock_suspend NULL +#define exynos4212_clock_resume NULL +#endif + +struct syscore_ops exynos4212_clock_syscore_ops = { + .suspend = exynos4212_clock_suspend, + .resume = exynos4212_clock_resume, +}; + +void __init exynos4212_register_clocks(void) +{ + int ptr; + + /* usbphy1 is removed */ + clkset_group_list[4] = NULL; + + /* mout_mpll_user is used */ + clkset_group_list[6] = &clk_mout_mpll_user.clk; + clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk; + + clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC; + clk_mout_mpll.reg_src.shift = 12; + clk_mout_mpll.reg_src.size = 1; + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + register_syscore_ops(&exynos4212_clock_syscore_ops); +} diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 86964d2e9e1b..0d59be3fa1fe 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/syscore_ops.h> #include <plat/cpu-freq.h> #include <plat/clock.h> @@ -20,26 +21,93 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> +#include <plat/exynos4.h> +#include <plat/pm.h> #include <mach/map.h> #include <mach/regs-clock.h> #include <mach/sysmmu.h> - -static struct clk clk_sclk_hdmi27m = { +#include <mach/exynos4-clock.h> + +static struct sleep_save exynos4_clock_save[] = { + SAVE_ITEM(S5P_CLKDIV_LEFTBUS), + SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), + SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), + SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), + SAVE_ITEM(S5P_CLKSRC_TOP0), + SAVE_ITEM(S5P_CLKSRC_TOP1), + SAVE_ITEM(S5P_CLKSRC_CAM), + SAVE_ITEM(S5P_CLKSRC_TV), + SAVE_ITEM(S5P_CLKSRC_MFC), + SAVE_ITEM(S5P_CLKSRC_G3D), + SAVE_ITEM(S5P_CLKSRC_LCD0), + SAVE_ITEM(S5P_CLKSRC_MAUDIO), + SAVE_ITEM(S5P_CLKSRC_FSYS), + SAVE_ITEM(S5P_CLKSRC_PERIL0), + SAVE_ITEM(S5P_CLKSRC_PERIL1), + SAVE_ITEM(S5P_CLKDIV_CAM), + SAVE_ITEM(S5P_CLKDIV_TV), + SAVE_ITEM(S5P_CLKDIV_MFC), + SAVE_ITEM(S5P_CLKDIV_G3D), + SAVE_ITEM(S5P_CLKDIV_LCD0), + SAVE_ITEM(S5P_CLKDIV_MAUDIO), + SAVE_ITEM(S5P_CLKDIV_FSYS0), + SAVE_ITEM(S5P_CLKDIV_FSYS1), + SAVE_ITEM(S5P_CLKDIV_FSYS2), + SAVE_ITEM(S5P_CLKDIV_FSYS3), + SAVE_ITEM(S5P_CLKDIV_PERIL0), + SAVE_ITEM(S5P_CLKDIV_PERIL1), + SAVE_ITEM(S5P_CLKDIV_PERIL2), + SAVE_ITEM(S5P_CLKDIV_PERIL3), + SAVE_ITEM(S5P_CLKDIV_PERIL4), + SAVE_ITEM(S5P_CLKDIV_PERIL5), + SAVE_ITEM(S5P_CLKDIV_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_CAM), + SAVE_ITEM(S5P_CLKSRC_MASK_TV), + SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), + SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO), + SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), + SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), + SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), + SAVE_ITEM(S5P_CLKDIV2_RATIO), + SAVE_ITEM(S5P_CLKGATE_SCLKCAM), + SAVE_ITEM(S5P_CLKGATE_IP_CAM), + SAVE_ITEM(S5P_CLKGATE_IP_TV), + SAVE_ITEM(S5P_CLKGATE_IP_MFC), + SAVE_ITEM(S5P_CLKGATE_IP_G3D), + SAVE_ITEM(S5P_CLKGATE_IP_LCD0), + SAVE_ITEM(S5P_CLKGATE_IP_FSYS), + SAVE_ITEM(S5P_CLKGATE_IP_GPS), + SAVE_ITEM(S5P_CLKGATE_IP_PERIL), + SAVE_ITEM(S5P_CLKGATE_BLOCK), + SAVE_ITEM(S5P_CLKSRC_MASK_DMC), + SAVE_ITEM(S5P_CLKSRC_DMC), + SAVE_ITEM(S5P_CLKDIV_DMC0), + SAVE_ITEM(S5P_CLKDIV_DMC1), + SAVE_ITEM(S5P_CLKGATE_IP_DMC), + SAVE_ITEM(S5P_CLKSRC_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), + SAVE_ITEM(S5P_CLKGATE_SCLKCPU), + SAVE_ITEM(S5P_CLKGATE_IP_CPU), +}; + +struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", .rate = 27000000, }; -static struct clk clk_sclk_hdmiphy = { +struct clk clk_sclk_hdmiphy = { .name = "sclk_hdmiphy", }; -static struct clk clk_sclk_usbphy0 = { +struct clk clk_sclk_usbphy0 = { .name = "sclk_usbphy0", .rate = 27000000, }; -static struct clk clk_sclk_usbphy1 = { +struct clk clk_sclk_usbphy1 = { .name = "sclk_usbphy1", }; @@ -58,12 +126,7 @@ static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable); } -static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); -} - -static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable); } @@ -103,12 +166,12 @@ static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable); } -static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) +int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable); } -static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) +int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable); } @@ -133,7 +196,7 @@ static struct clksrc_clk clk_mout_apll = { .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 }, }; -static struct clksrc_clk clk_sclk_apll = { +struct clksrc_clk clk_sclk_apll = { .clk = { .name = "sclk_apll", .parent = &clk_mout_apll.clk, @@ -141,7 +204,7 @@ static struct clksrc_clk clk_sclk_apll = { .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 }, }; -static struct clksrc_clk clk_mout_epll = { +struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", }, @@ -149,12 +212,13 @@ static struct clksrc_clk clk_mout_epll = { .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 }, }; -static struct clksrc_clk clk_mout_mpll = { +struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", }, .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 }, + + /* reg_src will be added in each SoCs' clock */ }; static struct clk *clkset_moutcore_list[] = { @@ -224,12 +288,12 @@ static struct clksrc_clk clk_periphclk = { /* Core list of CMU_CORE side */ -static struct clk *clkset_corebus_list[] = { +struct clk *clkset_corebus_list[] = { [0] = &clk_mout_mpll.clk, [1] = &clk_sclk_apll.clk, }; -static struct clksrc_sources clkset_mout_corebus = { +struct clksrc_sources clkset_mout_corebus = { .sources = clkset_corebus_list, .nr_sources = ARRAY_SIZE(clkset_corebus_list), }; @@ -284,12 +348,12 @@ static struct clksrc_clk clk_pclk_acp = { /* Core list of CMU_TOP side */ -static struct clk *clkset_aclk_top_list[] = { +struct clk *clkset_aclk_top_list[] = { [0] = &clk_mout_mpll.clk, [1] = &clk_sclk_apll.clk, }; -static struct clksrc_sources clkset_aclk = { +struct clksrc_sources clkset_aclk = { .sources = clkset_aclk_top_list, .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), }; @@ -321,7 +385,7 @@ static struct clksrc_clk clk_aclk_160 = { .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 }, }; -static struct clksrc_clk clk_aclk_133 = { +struct clksrc_clk clk_aclk_133 = { .clk = { .name = "aclk_133", }, @@ -360,7 +424,7 @@ static struct clksrc_sources clkset_sclk_vpll = { .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list), }; -static struct clksrc_clk clk_sclk_vpll = { +struct clksrc_clk clk_sclk_vpll = { .clk = { .name = "sclk_vpll", }, @@ -410,16 +474,6 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_lcd0_ctrl, .ctrlbit = (1 << 0), }, { - .name = "fimd", - .devname = "exynos4-fb.1", - .enable = exynos4_clk_ip_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "sataphy", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 3), - }, { .name = "hsmmc", .devname = "s3c-sdhci.0", .parent = &clk_aclk_133.clk, @@ -449,11 +503,6 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 9), }, { - .name = "sata", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 10), - }, { .name = "pdma", .devname = "s3c-pl330.0", .enable = exynos4_clk_ip_fsys_ctrl, @@ -673,7 +722,7 @@ static struct clk init_clocks[] = { } }; -static struct clk *clkset_group_list[] = { +struct clk *clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_xusbxti, [2] = &clk_sclk_hdmi27m, @@ -685,7 +734,7 @@ static struct clk *clkset_group_list[] = { [8] = &clk_sclk_vpll.clk, }; -static struct clksrc_sources clkset_group = { +struct clksrc_sources clkset_group = { .sources = clkset_group_list, .nr_sources = ARRAY_SIZE(clkset_group_list), }; @@ -967,25 +1016,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 }, }, { .clk = { - .name = "sclk_fimd", - .devname = "exynos4-fb.1", - .enable = exynos4_clksrc_mask_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_sata", - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, - }, { - .clk = { .name = "sclk_spi", .devname = "s3c64xx-spi.0", .enable = exynos4_clksrc_mask_peril1_ctrl, @@ -1114,7 +1144,13 @@ static int xtal_rate; static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) { - return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508); + if (soc_is_exynos4210()) + return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), + pll_4508); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0)); + else + return 0; } static struct clk_ops exynos4_fout_apll_ops = { @@ -1124,10 +1160,10 @@ static struct clk_ops exynos4_fout_apll_ops = { void __init_or_cpufreq exynos4_setup_clocks(void) { struct clk *xtal_clk; - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned long vpll; + unsigned long apll = 0; + unsigned long mpll = 0; + unsigned long epll = 0; + unsigned long vpll = 0; unsigned long vpllsrc; unsigned long xtal; unsigned long armclk; @@ -1151,14 +1187,29 @@ void __init_or_cpufreq exynos4_setup_clocks(void) printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508); - epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), - __raw_readl(S5P_EPLL_CON1), pll_4600); - - vpllsrc = clk_get_rate(&clk_vpllsrc.clk); - vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650c); + if (soc_is_exynos4210()) { + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), + pll_4508); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), + pll_4508); + epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), + __raw_readl(S5P_EPLL_CON1), pll_4600); + + vpllsrc = clk_get_rate(&clk_vpllsrc.clk); + vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), + __raw_readl(S5P_VPLL_CON1), pll_4650c); + } else if (soc_is_exynos4212() || soc_is_exynos4412()) { + apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0)); + mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0)); + epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0), + __raw_readl(S5P_EPLL_CON1)); + + vpllsrc = clk_get_rate(&clk_vpllsrc.clk); + vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), + __raw_readl(S5P_VPLL_CON1)); + } else { + /* nothing */ + } clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; @@ -1193,6 +1244,28 @@ static struct clk *clks[] __initdata = { /* Nothing here yet */ }; +#ifdef CONFIG_PM_SLEEP +static int exynos4_clock_suspend(void) +{ + s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); + return 0; +} + +static void exynos4_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); +} + +#else +#define exynos4_clock_suspend NULL +#define exynos4_clock_resume NULL +#endif + +struct syscore_ops exynos4_clock_syscore_ops = { + .suspend = exynos4_clock_suspend, + .resume = exynos4_clock_resume, +}; + void __init exynos4_register_clocks(void) { int ptr; @@ -1208,5 +1281,6 @@ void __init exynos4_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + register_syscore_ops(&exynos4_clock_syscore_ops); s3c_pwmclk_init(); } diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 746d6fc6d397..a348434f17b5 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -32,6 +32,8 @@ #include <mach/regs-irq.h> #include <mach/regs-pmu.h> +unsigned int gic_bank_offset __read_mostly; + extern int combiner_init(unsigned int combiner_nr, void __iomem *base, unsigned int irq_start); extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); @@ -44,11 +46,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), .length = SZ_128K, @@ -121,6 +118,24 @@ static struct map_desc exynos4_iodesc[] __initdata = { }, }; +static struct map_desc exynos4_iodesc0[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc exynos4_iodesc1[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + static void exynos4_idle(void) { if (!need_resched()) @@ -143,6 +158,11 @@ void __init exynos4_map_io(void) { iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) + iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0)); + else + iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1)); + /* initialize device information early */ exynos4_default_sdhci0(); exynos4_default_sdhci1(); @@ -170,24 +190,37 @@ void __init exynos4_init_clocks(int xtal) s3c24xx_register_baseclocks(xtal); s5p_register_clocks(xtal); + + if (soc_is_exynos4210()) + exynos4210_register_clocks(); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + exynos4212_register_clocks(); + exynos4_register_clocks(); exynos4_setup_clocks(); } -static void exynos4_gic_irq_eoi(struct irq_data *d) +static void exynos4_gic_irq_fix_base(struct irq_data *d) { struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); gic_data->cpu_base = S5P_VA_GIC_CPU + - (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + (gic_bank_offset * smp_processor_id()); + + gic_data->dist_base = S5P_VA_GIC_DIST + + (gic_bank_offset * smp_processor_id()); } void __init exynos4_init_irq(void) { int irq; - gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); - gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi; + gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; + + gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base; + gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base; + gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base; for (irq = 0; irq < MAX_COMBINER_NR; irq++) { @@ -223,7 +256,11 @@ static int __init exynos4_l2x0_cache_init(void) { /* TAG, Data Latency Control: 2cycle */ __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); - __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + + if (soc_is_exynos4210()) + __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); /* L2X0 Prefetch Control */ __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL); diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S index 006a4f4c65c6..f5e9fd8e37b4 100644 --- a/arch/arm/mach-exynos4/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S @@ -17,12 +17,25 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr + mov \tmp, #0 + + mrc p15, 0, \base, c0, c0, 5 + and \base, \base, #3 + cmp \base, #0 + beq 1f + + ldr \tmp, =gic_bank_offset + ldr \tmp, [\tmp] + cmp \base, #1 + beq 1f + + cmp \base, #2 + addeq \tmp, \tmp, \tmp + addne \tmp, \tmp, \tmp, LSL #1 + +1: ldr \base, =gic_cpu_base_addr ldr \base, [\base] - mrc p15, 0, \tmp, c0, c0, 5 - and \tmp, \tmp, #3 - cmp \tmp, #1 - addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET + add \base, \base, \tmp .endm .macro arch_ret_to_user, tmp1, tmp2 diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h new file mode 100644 index 000000000000..a07fcbf55251 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h @@ -0,0 +1,43 @@ +/* + * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for exynos4 clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H __FILE__ + +#include <linux/clk.h> + +extern struct clk clk_sclk_hdmi27m; +extern struct clk clk_sclk_usbphy0; +extern struct clk clk_sclk_usbphy1; +extern struct clk clk_sclk_hdmiphy; + +extern struct clksrc_clk clk_sclk_apll; +extern struct clksrc_clk clk_mout_mpll; +extern struct clksrc_clk clk_aclk_133; +extern struct clksrc_clk clk_mout_epll; +extern struct clksrc_clk clk_sclk_vpll; + +extern struct clk *clkset_corebus_list[]; +extern struct clksrc_sources clkset_mout_corebus; + +extern struct clk *clkset_aclk_top_list[]; +extern struct clksrc_sources clkset_aclk; + +extern struct clk *clkset_group_list[]; +extern struct clksrc_sources clkset_group; + +extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); + +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index f8952f8f3757..2d3f6bcd9bc0 100644 --- a/arch/arm/mach-exynos4/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -19,6 +19,8 @@ #define IRQ_PPI(x) S5P_IRQ(x+16) +#define IRQ_MCT_LOCALTIMER IRQ_PPI(12) + /* SPI: Shared Peripheral Interrupt */ #define IRQ_SPI(x) S5P_IRQ(x+32) diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h index d32296dc65e2..9f97eb8499ee 100644 --- a/arch/arm/mach-exynos4/include/mach/map.h +++ b/arch/arm/mach-exynos4/include/mach/map.h @@ -23,7 +23,8 @@ #include <plat/map-s5p.h> -#define EXYNOS4_PA_SYSRAM 0x02020000 +#define EXYNOS4_PA_SYSRAM0 0x02025000 +#define EXYNOS4_PA_SYSRAM1 0x02020000 #define EXYNOS4_PA_FIMC0 0x11800000 #define EXYNOS4_PA_FIMC1 0x11810000 @@ -61,7 +62,6 @@ #define EXYNOS4_PA_GIC_CPU 0x10480000 #define EXYNOS4_PA_GIC_DIST 0x10490000 -#define EXYNOS4_GIC_BANK_OFFSET 0x8000 #define EXYNOS4_PA_COREPERI 0x10500000 #define EXYNOS4_PA_TWD 0x10500600 diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h index d493fdb422ff..6c37ebe94829 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_REGS_CLOCK_H #define __ASM_ARCH_REGS_CLOCK_H __FILE__ +#include <plat/cpu.h> #include <mach/map.h> #define S5P_CLKREG(x) (S5P_VA_CMU + (x)) @@ -41,12 +42,20 @@ #define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C) #define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) #define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) -#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) #define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C) #define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) #define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) #define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) +#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) +#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) +#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324) +#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) +#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C) +#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) +#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) +#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) + #define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) #define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) #define S5P_CLKDIV_TV S5P_CLKREG(0x0C524) @@ -54,7 +63,6 @@ #define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C) #define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) #define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) -#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) #define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C) #define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) #define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) @@ -68,16 +76,6 @@ #define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) #define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580) -#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) -#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) -#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324) -#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) -#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) -#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C) -#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) -#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) -#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) - #define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) #define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820) @@ -85,13 +83,20 @@ #define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924) #define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928) #define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C) -#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) +#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \ + S5P_CLKREG(0x0C930) : \ + S5P_CLKREG(0x04930)) +#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930) +#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930) #define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) -#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) #define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) #define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C) #define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) -#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) +#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \ + S5P_CLKREG(0x0C960) : \ + S5P_CLKREG(0x08960)) +#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960) +#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960) #define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970) #define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300) @@ -102,11 +107,17 @@ #define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900) #define S5P_APLL_LOCK S5P_CLKREG(0x14000) -#define S5P_MPLL_LOCK S5P_CLKREG(0x14004) +#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \ + S5P_CLKREG(0x14004) : \ + S5P_CLKREG(0x10008)) #define S5P_APLL_CON0 S5P_CLKREG(0x14100) #define S5P_APLL_CON1 S5P_CLKREG(0x14104) -#define S5P_MPLL_CON0 S5P_CLKREG(0x14108) -#define S5P_MPLL_CON1 S5P_CLKREG(0x1410C) +#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \ + S5P_CLKREG(0x14108) : \ + S5P_CLKREG(0x10108)) +#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \ + S5P_CLKREG(0x1410C) : \ + S5P_CLKREG(0x1010C)) #define S5P_CLKSRC_CPU S5P_CLKREG(0x14200) #define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400) @@ -183,6 +194,13 @@ #define S5P_CLKDIV_BUS_GPLR_SHIFT (4) #define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) +/* Only for EXYNOS4210 */ + +#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) +#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) +#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) +#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) + /* Compatibility defines and inclusion */ #include <mach/regs-pmu.h> diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h index ca9c8434b023..80dd02ad6d61 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-mct.h +++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h @@ -31,8 +31,9 @@ #define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248) #define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C) -#define EXYNOS4_MCT_L0_BASE EXYNOS4_MCTREG(0x300) -#define EXYNOS4_MCT_L1_BASE EXYNOS4_MCTREG(0x400) +#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300) +#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x)) +#define EXYNOS4_MCT_L_MASK (0xffffff00) #define MCT_L_TCNTB_OFFSET (0x00) #define MCT_L_ICNTB_OFFSET (0x08) diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c new file mode 100644 index 000000000000..b5f6f38557c9 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -0,0 +1,108 @@ +/* linux/arch/arm/mach-exynos4/mach-origen.c + * + * Copyright (c) 2011 Insignal Co., Ltd. + * http://www.insignal.co.kr/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_core.h> +#include <linux/gpio.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/input.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <plat/exynos4.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/sdhci.h> +#include <plat/iic.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = ORIGEN_UCON_DEFAULT, + .ulcon = ORIGEN_ULCON_DEFAULT, + .ufcon = ORIGEN_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = ORIGEN_UCON_DEFAULT, + .ulcon = ORIGEN_ULCON_DEFAULT, + .ufcon = ORIGEN_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = ORIGEN_UCON_DEFAULT, + .ulcon = ORIGEN_ULCON_DEFAULT, + .ufcon = ORIGEN_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = ORIGEN_UCON_DEFAULT, + .ulcon = ORIGEN_ULCON_DEFAULT, + .ufcon = ORIGEN_UFCON_DEFAULT, + }, +}; + +static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPK2(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct platform_device *origen_devices[] __initdata = { + &s3c_device_hsmmc2, + &s3c_device_rtc, + &s3c_device_wdt, +}; + +static void __init origen_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs)); +} + +static void __init origen_machine_init(void) +{ + s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata); + platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); +} + +MACHINE_START(ORIGEN, "ORIGEN") + /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */ + .atag_offset = 0x100, + .init_irq = exynos4_init_irq, + .map_io = origen_map_io, + .init_machine = origen_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-smdk4x12.c b/arch/arm/mach-exynos4/mach-smdk4x12.c new file mode 100644 index 000000000000..fcf2e0e23d53 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-smdk4x12.c @@ -0,0 +1,302 @@ +/* + * linux/arch/arm/mach-exynos4/mach-smdk4x12.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/mfd/max8997.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/pwm_backlight.h> +#include <linux/regulator/machine.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/backlight.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/exynos4.h> +#include <plat/gpio-cfg.h> +#include <plat/iic.h> +#include <plat/keypad.h> +#include <plat/regs-serial.h> +#include <plat/sdhci.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDK4X12_UCON_DEFAULT, + .ulcon = SMDK4X12_ULCON_DEFAULT, + .ufcon = SMDK4X12_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDK4X12_UCON_DEFAULT, + .ulcon = SMDK4X12_ULCON_DEFAULT, + .ufcon = SMDK4X12_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDK4X12_UCON_DEFAULT, + .ulcon = SMDK4X12_ULCON_DEFAULT, + .ufcon = SMDK4X12_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDK4X12_UCON_DEFAULT, + .ulcon = SMDK4X12_ULCON_DEFAULT, + .ufcon = SMDK4X12_UFCON_DEFAULT, + }, +}; + +static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct regulator_consumer_supply max8997_buck1 = + REGULATOR_SUPPLY("vdd_arm", NULL); + +static struct regulator_consumer_supply max8997_buck2 = + REGULATOR_SUPPLY("vdd_int", NULL); + +static struct regulator_consumer_supply max8997_buck3 = + REGULATOR_SUPPLY("vdd_g3d", NULL); + +static struct regulator_init_data max8997_buck1_data = { + .constraints = { + .name = "VDD_ARM_SMDK4X12", + .min_uV = 925000, + .max_uV = 1350000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8997_buck1, +}; + +static struct regulator_init_data max8997_buck2_data = { + .constraints = { + .name = "VDD_INT_SMDK4X12", + .min_uV = 950000, + .max_uV = 1150000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8997_buck2, +}; + +static struct regulator_init_data max8997_buck3_data = { + .constraints = { + .name = "VDD_G3D_SMDK4X12", + .min_uV = 950000, + .max_uV = 1150000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8997_buck3, +}; + +static struct max8997_regulator_data smdk4x12_max8997_regulators[] = { + { MAX8997_BUCK1, &max8997_buck1_data }, + { MAX8997_BUCK2, &max8997_buck2_data }, + { MAX8997_BUCK3, &max8997_buck3_data }, +}; + +static struct max8997_platform_data smdk4x12_max8997_pdata = { + .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators), + .regulators = smdk4x12_max8997_regulators, + + .buck1_voltage[0] = 1100000, /* 1.1V */ + .buck1_voltage[1] = 1100000, /* 1.1V */ + .buck1_voltage[2] = 1100000, /* 1.1V */ + .buck1_voltage[3] = 1100000, /* 1.1V */ + .buck1_voltage[4] = 1100000, /* 1.1V */ + .buck1_voltage[5] = 1100000, /* 1.1V */ + .buck1_voltage[6] = 1000000, /* 1.0V */ + .buck1_voltage[7] = 950000, /* 0.95V */ + + .buck2_voltage[0] = 1100000, /* 1.1V */ + .buck2_voltage[1] = 1000000, /* 1.0V */ + .buck2_voltage[2] = 950000, /* 0.95V */ + .buck2_voltage[3] = 900000, /* 0.9V */ + .buck2_voltage[4] = 1100000, /* 1.1V */ + .buck2_voltage[5] = 1000000, /* 1.0V */ + .buck2_voltage[6] = 950000, /* 0.95V */ + .buck2_voltage[7] = 900000, /* 0.9V */ + + .buck5_voltage[0] = 1100000, /* 1.1V */ + .buck5_voltage[1] = 1100000, /* 1.1V */ + .buck5_voltage[2] = 1100000, /* 1.1V */ + .buck5_voltage[3] = 1100000, /* 1.1V */ + .buck5_voltage[4] = 1100000, /* 1.1V */ + .buck5_voltage[5] = 1100000, /* 1.1V */ + .buck5_voltage[6] = 1100000, /* 1.1V */ + .buck5_voltage[7] = 1100000, /* 1.1V */ +}; + +static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = { + { + I2C_BOARD_INFO("max8997", 0x66), + .platform_data = &smdk4x12_max8997_pdata, + } +}; + +static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = { + { I2C_BOARD_INFO("wm8994", 0x1a), } +}; + +static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = { + /* nothing here yet */ +}; + +static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = { + /* nothing here yet */ +}; + +static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = { + .no = EXYNOS4_GPD0(1), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdk4x12_bl_data = { + .pwm_id = 1, + .pwm_period_ns = 1000, +}; + +static uint32_t smdk4x12_keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B), + KEY(1, 3, KEY_E), KEY(1, 4, KEY_C) +}; + +static struct matrix_keymap_data smdk4x12_keymap_data __initdata = { + .keymap = smdk4x12_keymap, + .keymap_size = ARRAY_SIZE(smdk4x12_keymap), +}; + +static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = { + .keymap_data = &smdk4x12_keymap_data, + .rows = 2, + .cols = 5, +}; + +static struct platform_device *smdk4x12_devices[] __initdata = { + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_i2c3, + &s3c_device_i2c7, + &s3c_device_rtc, + &s3c_device_wdt, + &samsung_device_keypad, +}; + +static void __init smdk4x12_map_io(void) +{ + clk_xusbxti.rate = 24000000; + + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(clk_xusbxti.rate); + s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs)); +} + +static void __init smdk4x12_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, smdk4x12_i2c_devs0, + ARRAY_SIZE(smdk4x12_i2c_devs0)); + + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(1, smdk4x12_i2c_devs1, + ARRAY_SIZE(smdk4x12_i2c_devs1)); + + s3c_i2c3_set_platdata(NULL); + i2c_register_board_info(3, smdk4x12_i2c_devs3, + ARRAY_SIZE(smdk4x12_i2c_devs3)); + + s3c_i2c7_set_platdata(NULL); + i2c_register_board_info(7, smdk4x12_i2c_devs7, + ARRAY_SIZE(smdk4x12_i2c_devs7)); + + samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data); + + samsung_keypad_set_platdata(&smdk4x12_keypad_data); + + s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata); + s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata); + + platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices)); +} + +MACHINE_START(SMDK4212, "SMDK4212") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .atag_offset = 0x100, + .init_irq = exynos4_init_irq, + .map_io = smdk4x12_map_io, + .init_machine = smdk4x12_machine_init, + .timer = &exynos4_timer, +MACHINE_END + +MACHINE_START(SMDK4412, "SMDK4412") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ + .atag_offset = 0x100, + .init_irq = exynos4_init_irq, + .map_io = smdk4x12_map_io, + .init_machine = smdk4x12_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 582b874aab0e..f191608b28d6 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -20,19 +20,31 @@ #include <linux/delay.h> #include <linux/percpu.h> +#include <asm/hardware/gic.h> + +#include <plat/cpu.h> + #include <mach/map.h> +#include <mach/irqs.h> #include <mach/regs-mct.h> #include <asm/mach/time.h> +enum { + MCT_INT_SPI, + MCT_INT_PPI +}; + static unsigned long clk_cnt_per_tick; static unsigned long clk_rate; +static unsigned int mct_int_type; struct mct_clock_event_device { struct clock_event_device *evt; void __iomem *base; + char name[10]; }; -struct mct_clock_event_device mct_tick[2]; +struct mct_clock_event_device mct_tick[NR_CPUS]; static void exynos4_mct_write(unsigned int value, void *addr) { @@ -42,57 +54,53 @@ static void exynos4_mct_write(unsigned int value, void *addr) __raw_writel(value, addr); - switch ((u32) addr) { - case (u32) EXYNOS4_MCT_G_TCON: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 16; /* G_TCON write status */ - break; - case (u32) EXYNOS4_MCT_G_COMP0_L: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 0; /* G_COMP0_L write status */ - break; - case (u32) EXYNOS4_MCT_G_COMP0_U: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 1; /* G_COMP0_U write status */ - break; - case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 2; /* G_COMP0_ADD_INCR write status */ - break; - case (u32) EXYNOS4_MCT_G_CNT_L: - stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; - mask = 1 << 0; /* G_CNT_L write status */ - break; - case (u32) EXYNOS4_MCT_G_CNT_U: - stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; - mask = 1 << 1; /* G_CNT_U write status */ - break; - case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET): - stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 3; /* L0_TCON write status */ - break; - case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET): - stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 3; /* L1_TCON write status */ - break; - case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET): - stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 0; /* L0_TCNTB write status */ - break; - case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET): - stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 0; /* L1_TCNTB write status */ - break; - case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET): - stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 1; /* L0_ICNTB write status */ - break; - case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET): - stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 1; /* L1_ICNTB write status */ - break; - default: - return; + if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) { + u32 base = (u32) addr & EXYNOS4_MCT_L_MASK; + switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) { + case (u32) MCT_L_TCON_OFFSET: + stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + mask = 1 << 3; /* L_TCON write status */ + break; + case (u32) MCT_L_ICNTB_OFFSET: + stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + mask = 1 << 1; /* L_ICNTB write status */ + break; + case (u32) MCT_L_TCNTB_OFFSET: + stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + mask = 1 << 0; /* L_TCNTB write status */ + break; + default: + return; + } + } else { + switch ((u32) addr) { + case (u32) EXYNOS4_MCT_G_TCON: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 16; /* G_TCON write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_L: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 0; /* G_COMP0_L write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_U: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 1; /* G_COMP0_U write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 2; /* G_COMP0_ADD_INCR w status */ + break; + case (u32) EXYNOS4_MCT_G_CNT_L: + stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; + mask = 1 << 0; /* G_CNT_L write status */ + break; + case (u32) EXYNOS4_MCT_G_CNT_U: + stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; + mask = 1 << 1; /* G_CNT_U write status */ + break; + default: + return; + } } /* Wait maximum 1 ms until written values are applied */ @@ -321,9 +329,8 @@ static inline void exynos4_tick_set_mode(enum clock_event_mode mode, } } -static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) +static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt) { - struct mct_clock_event_device *mevt = dev_id; struct clock_event_device *evt = mevt->evt; /* @@ -335,7 +342,20 @@ static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) exynos4_mct_tick_stop(mevt); /* Clear the MCT tick interrupt */ - exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); + if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) { + exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); + return 1; + } else { + return 0; + } +} + +static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) +{ + struct mct_clock_event_device *mevt = dev_id; + struct clock_event_device *evt = mevt->evt; + + exynos4_mct_tick_clear(mevt); evt->event_handler(evt); @@ -360,14 +380,10 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) mct_tick[cpu].evt = evt; - if (cpu == 0) { - mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE; - evt->name = "mct_tick0"; - } else { - mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE; - evt->name = "mct_tick1"; - } + mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu); + sprintf(mct_tick[cpu].name, "mct_tick%d", cpu); + evt->name = mct_tick[cpu].name; evt->cpumask = cpumask_of(cpu); evt->set_next_event = exynos4_tick_set_next_event; evt->set_mode = exynos4_tick_set_mode; @@ -384,15 +400,19 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET); - if (cpu == 0) { - mct_tick0_event_irq.dev_id = &mct_tick[cpu]; - evt->irq = IRQ_MCT_L0; - setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); + if (mct_int_type == MCT_INT_SPI) { + if (cpu == 0) { + mct_tick0_event_irq.dev_id = &mct_tick[cpu]; + evt->irq = IRQ_MCT_L0; + setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); + } else { + mct_tick1_event_irq.dev_id = &mct_tick[cpu]; + evt->irq = IRQ_MCT_L1; + setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); + irq_set_affinity(IRQ_MCT_L1, cpumask_of(1)); + } } else { - mct_tick1_event_irq.dev_id = &mct_tick[cpu]; - evt->irq = IRQ_MCT_L1; - setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); - irq_set_affinity(IRQ_MCT_L1, cpumask_of(1)); + gic_enable_ppi(IRQ_MCT_LOCALTIMER); } } @@ -422,6 +442,11 @@ static void __init exynos4_timer_resources(void) static void __init exynos4_timer_init(void) { + if (soc_is_exynos4210()) + mct_int_type = MCT_INT_SPI; + else + mct_int_type = MCT_INT_PPI; + exynos4_timer_resources(); exynos4_clocksource_init(); exynos4_clockevent_init(); diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index 0c90896ad9a0..782dcf11d234 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -30,9 +30,13 @@ #include <mach/regs-clock.h> #include <mach/regs-pmu.h> +#include <plat/cpu.h> + +extern unsigned int gic_bank_offset; extern void exynos4_secondary_startup(void); -#define CPU1_BOOT_REG S5P_VA_SYSRAM +#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM5 : S5P_VA_SYSRAM) /* * control for which core is the next to come out of the secondary @@ -64,9 +68,9 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit exynos4_gic_secondary_init(void) { void __iomem *dist_base = S5P_VA_GIC_DIST + - (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + (gic_bank_offset * smp_processor_id()); void __iomem *cpu_base = S5P_VA_GIC_CPU + - (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + (gic_bank_offset * smp_processor_id()); int i; /* @@ -216,5 +220,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM); + __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), + CPU1_BOOT_REG); } diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c index bc6ca9482de1..62e4f4363006 100644 --- a/arch/arm/mach-exynos4/pm.c +++ b/arch/arm/mach-exynos4/pm.c @@ -41,7 +41,6 @@ static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, }, { .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, }, { .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, }, - { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, { .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, }, { .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, }, { .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, }, @@ -49,6 +48,10 @@ static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, }, }; +static struct sleep_save exynos4210_set_clksrc[] = { + { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, +}; + static struct sleep_save exynos4_epll_save[] = { SAVE_ITEM(S5P_EPLL_CON0), SAVE_ITEM(S5P_EPLL_CON1), @@ -60,77 +63,6 @@ static struct sleep_save exynos4_vpll_save[] = { }; static struct sleep_save exynos4_core_save[] = { - /* CMU side */ - SAVE_ITEM(S5P_CLKDIV_LEFTBUS), - SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), - SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), - SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), - SAVE_ITEM(S5P_CLKSRC_TOP0), - SAVE_ITEM(S5P_CLKSRC_TOP1), - SAVE_ITEM(S5P_CLKSRC_CAM), - SAVE_ITEM(S5P_CLKSRC_TV), - SAVE_ITEM(S5P_CLKSRC_MFC), - SAVE_ITEM(S5P_CLKSRC_G3D), - SAVE_ITEM(S5P_CLKSRC_IMAGE), - SAVE_ITEM(S5P_CLKSRC_LCD0), - SAVE_ITEM(S5P_CLKSRC_LCD1), - SAVE_ITEM(S5P_CLKSRC_MAUDIO), - SAVE_ITEM(S5P_CLKSRC_FSYS), - SAVE_ITEM(S5P_CLKSRC_PERIL0), - SAVE_ITEM(S5P_CLKSRC_PERIL1), - SAVE_ITEM(S5P_CLKDIV_CAM), - SAVE_ITEM(S5P_CLKDIV_TV), - SAVE_ITEM(S5P_CLKDIV_MFC), - SAVE_ITEM(S5P_CLKDIV_G3D), - SAVE_ITEM(S5P_CLKDIV_IMAGE), - SAVE_ITEM(S5P_CLKDIV_LCD0), - SAVE_ITEM(S5P_CLKDIV_LCD1), - SAVE_ITEM(S5P_CLKDIV_MAUDIO), - SAVE_ITEM(S5P_CLKDIV_FSYS0), - SAVE_ITEM(S5P_CLKDIV_FSYS1), - SAVE_ITEM(S5P_CLKDIV_FSYS2), - SAVE_ITEM(S5P_CLKDIV_FSYS3), - SAVE_ITEM(S5P_CLKDIV_PERIL0), - SAVE_ITEM(S5P_CLKDIV_PERIL1), - SAVE_ITEM(S5P_CLKDIV_PERIL2), - SAVE_ITEM(S5P_CLKDIV_PERIL3), - SAVE_ITEM(S5P_CLKDIV_PERIL4), - SAVE_ITEM(S5P_CLKDIV_PERIL5), - SAVE_ITEM(S5P_CLKDIV_TOP), - SAVE_ITEM(S5P_CLKSRC_MASK_TOP), - SAVE_ITEM(S5P_CLKSRC_MASK_CAM), - SAVE_ITEM(S5P_CLKSRC_MASK_TV), - SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), - SAVE_ITEM(S5P_CLKSRC_MASK_LCD1), - SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO), - SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), - SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), - SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), - SAVE_ITEM(S5P_CLKDIV2_RATIO), - SAVE_ITEM(S5P_CLKGATE_SCLKCAM), - SAVE_ITEM(S5P_CLKGATE_IP_CAM), - SAVE_ITEM(S5P_CLKGATE_IP_TV), - SAVE_ITEM(S5P_CLKGATE_IP_MFC), - SAVE_ITEM(S5P_CLKGATE_IP_G3D), - SAVE_ITEM(S5P_CLKGATE_IP_IMAGE), - SAVE_ITEM(S5P_CLKGATE_IP_LCD0), - SAVE_ITEM(S5P_CLKGATE_IP_LCD1), - SAVE_ITEM(S5P_CLKGATE_IP_FSYS), - SAVE_ITEM(S5P_CLKGATE_IP_GPS), - SAVE_ITEM(S5P_CLKGATE_IP_PERIL), - SAVE_ITEM(S5P_CLKGATE_IP_PERIR), - SAVE_ITEM(S5P_CLKGATE_BLOCK), - SAVE_ITEM(S5P_CLKSRC_MASK_DMC), - SAVE_ITEM(S5P_CLKSRC_DMC), - SAVE_ITEM(S5P_CLKDIV_DMC0), - SAVE_ITEM(S5P_CLKDIV_DMC1), - SAVE_ITEM(S5P_CLKGATE_IP_DMC), - SAVE_ITEM(S5P_CLKSRC_CPU), - SAVE_ITEM(S5P_CLKDIV_CPU), - SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), - SAVE_ITEM(S5P_CLKGATE_SCLKCPU), - SAVE_ITEM(S5P_CLKGATE_IP_CPU), - /* GIC side */ SAVE_ITEM(S5P_VA_GIC_CPU + 0x000), SAVE_ITEM(S5P_VA_GIC_CPU + 0x004), @@ -268,6 +200,9 @@ static void exynos4_pm_prepare(void) s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc)); + if (soc_is_exynos4210()) + s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc)); + } static int exynos4_pm_add(struct sys_device *sysdev) diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 6f991c5ae863..fd5e7b6881bf 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -179,6 +179,25 @@ config MACH_GTWX5715 "High Speed" UART is n/c (as far as I can tell) 20 Pin ARM/Xscale JTAG interface on J2 +config MACH_DEVIXP + bool "Omicron DEVIXP" + help + Say 'Y' here if you want your kernel to support the DEVIXP + board from OMICRON electronics GmbH. + +config MACH_MICCPT + bool "Omicron MICCPT" + select PCI + help + Say 'Y' here if you want your kernel to support the MICCPT + board from OMICRON electronics GmbH. + +config MACH_MIC256 + bool "Omicron MIC256" + help + Say 'Y' here if you want your kernel to support the MIC256 + board from OMICRON electronics GmbH. + comment "IXP4xx Options" config IXP4XX_INDIRECT_PCI diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index d807fc367dd3..eded94c96dd4 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -10,6 +10,7 @@ obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o +obj-pci-$(CONFIG_MACH_MICCPT) += miccpt-pci.o obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o @@ -25,6 +26,9 @@ obj-$(CONFIG_MACH_AVILA) += avila-setup.o obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o +obj-$(CONFIG_MACH_DEVIXP) += omixp-setup.o +obj-$(CONFIG_MACH_MICCPT) += omixp-setup.o +obj-$(CONFIG_MACH_MIC256) += omixp-setup.o obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h index 219d7c1dcdba..eb945a926d07 100644 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h @@ -41,7 +41,8 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) * Some boards are using UART2 as console */ if (machine_is_adi_coyote() || machine_is_gtwx5715() || - machine_is_gateway7001() || machine_is_wg302v2()) + machine_is_gateway7001() || machine_is_wg302v2() || + machine_is_devixp() || machine_is_miccpt() || machine_is_mic256()) uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; else uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c new file mode 100644 index 000000000000..ca0bae7fca90 --- /dev/null +++ b/arch/arm/mach-ixp4xx/miccpt-pci.c @@ -0,0 +1,78 @@ +/* + * arch/arm/mach-ixp4xx/miccpt-pci.c + * + * MICCPT board-level PCI initialization + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * Copyright (C) 2006 OMICRON electronics GmbH + * + * Author: Michael Jochum <michael.jochum@omicron.at> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <asm/mach/pci.h> +#include <asm/irq.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> + +#define MAX_DEV 4 +#define IRQ_LINES 4 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 1 +#define INTB 2 +#define INTC 3 +#define INTD 4 + + +void __init miccpt_pci_preinit(void) +{ + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + ixp4xx_pci_preinit(); +} + +static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) + }; + + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % 4]; + + return -1; +} + +struct hw_pci miccpt_pci __initdata = { + .nr_controllers = 1, + .preinit = miccpt_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = miccpt_map_irq, +}; + +int __init miccpt_pci_init(void) +{ + if (machine_is_miccpt()) + pci_common_init(&miccpt_pci); + return 0; +} + +subsys_initcall(miccpt_pci_init); diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c new file mode 100644 index 000000000000..3b6a81a696fc --- /dev/null +++ b/arch/arm/mach-ixp4xx/omixp-setup.c @@ -0,0 +1,273 @@ +/* + * arch/arm/mach-ixp4xx/omixp-setup.c + * + * omicron ixp4xx board setup + * Copyright (C) 2009 OMICRON electronics GmbH + * + * based nslu2-setup.c, ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#ifdef CONFIG_LEDS_CLASS +#include <linux/leds.h> +#endif + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +static struct resource omixp_flash_resources[] = { + { + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition omixp_partitions[] = { + { + .name = "Recovery Bootloader", + .size = 0x00020000, + .offset = 0, + }, { + .name = "Calibration Data", + .size = 0x00020000, + .offset = 0x00020000, + }, { + .name = "Recovery FPGA", + .size = 0x00020000, + .offset = 0x00040000, + }, { + .name = "Release Bootloader", + .size = 0x00020000, + .offset = 0x00060000, + }, { + .name = "Release FPGA", + .size = 0x00020000, + .offset = 0x00080000, + }, { + .name = "Kernel", + .size = 0x00160000, + .offset = 0x000a0000, + }, { + .name = "Filesystem", + .size = 0x00C00000, + .offset = 0x00200000, + }, { + .name = "Persistent Storage", + .size = 0x00200000, + .offset = 0x00E00000, + }, +}; + +static struct flash_platform_data omixp_flash_data[] = { + { + .map_name = "cfi_probe", + .parts = omixp_partitions, + .nr_parts = ARRAY_SIZE(omixp_partitions), + }, { + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + }, +}; + +static struct platform_device omixp_flash_device[] = { + { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &omixp_flash_data[0], + }, + .resource = &omixp_flash_resources[0], + .num_resources = 1, + }, { + .name = "IXP4XX-Flash", + .id = 1, + .dev = { + .platform_data = &omixp_flash_data[1], + }, + .resource = &omixp_flash_resources[1], + .num_resources = 1, + }, +}; + +/* Swap UART's - These boards have the console on UART2. The following + * configuration is used: + * ttyS0 .. UART2 + * ttyS1 .. UART1 + * This way standard images can be used with the kernel that expect + * the console on ttyS0. + */ +static struct resource omixp_uart_resources[] = { + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct plat_serial8250_port omixp_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, { + /* list termination */ + } +}; + +static struct platform_device omixp_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = omixp_uart_data, + .num_resources = 2, + .resource = omixp_uart_resources, +}; + +static struct gpio_led mic256_led_pins[] = { + { + .name = "LED-A", + .gpio = 7, + }, +}; + +static struct gpio_led_platform_data mic256_led_data = { + .num_leds = ARRAY_SIZE(mic256_led_pins), + .leds = mic256_led_pins, +}; + +static struct platform_device mic256_leds = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &mic256_led_data, +}; + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info ixdp425_plat_eth[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 21, + }, +}; + +static struct platform_device ixdp425_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = ixdp425_plat_eth, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = ixdp425_plat_eth + 1, + }, +}; + + +static struct platform_device *devixp_pldev[] __initdata = { + &omixp_uart, + &omixp_flash_device[0], + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static struct platform_device *mic256_pldev[] __initdata = { + &omixp_uart, + &omixp_flash_device[0], + &mic256_leds, + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static struct platform_device *miccpt_pldev[] __initdata = { + &omixp_uart, + &omixp_flash_device[0], + &omixp_flash_device[1], + &ixdp425_eth[0], + &ixdp425_eth[1], +}; + +static void __init omixp_init(void) +{ + ixp4xx_sys_init(); + + /* 16MiB Boot Flash */ + omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0); + omixp_flash_resources[0].end = IXP4XX_EXP_BUS_END(0); + + /* 32 MiB Data Flash */ + omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2); + omixp_flash_resources[1].end = IXP4XX_EXP_BUS_END(2); + + if (machine_is_devixp()) + platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev)); + else if (machine_is_miccpt()) + platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev)); + else if (machine_is_mic256()) + platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev)); +} + +#ifdef CONFIG_MACH_DEVIXP +MACHINE_START(DEVIXP, "Omicron DEVIXP") + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .init_machine = omixp_init, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_MICCPT +MACHINE_START(MICCPT, "Omicron MICCPT") + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .init_machine = omixp_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif +MACHINE_END +#endif + +#ifdef CONFIG_MACH_MIC256 +MACHINE_START(MIC256, "Omicron MIC256") + .atag_offset = 0x100, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .init_machine = omixp_init, +MACHINE_END +#endif diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 4cd0231ee539..ea5ec0f3b5b1 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -64,8 +64,25 @@ config MODULE_TX28 select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_PWM +config MODULE_M28 + bool + select SOC_IMX28 + select LEDS_GPIO_REGISTER + select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART + select MXS_HAVE_PLATFORM_FEC + select MXS_HAVE_PLATFORM_FLEXCAN + select MXS_HAVE_PLATFORM_MXS_I2C + select MXS_HAVE_PLATFORM_MXS_MMC + select MXS_HAVE_PLATFORM_MXSFB + select MXS_OCOTP + config MACH_TX28 bool "Ka-Ro TX28 module" select MODULE_TX28 +config MACH_M28EVK + bool "Support DENX M28EVK Platform" + select MODULE_M28 + endif diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index ea8dcb7742bc..8c93b24896bf 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_SOC_IMX28) += clock-mx28.o obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o +obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o obj-$(CONFIG_MODULE_TX28) += module-tx28.o obj-$(CONFIG_MACH_TX28) += mach-tx28.o diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index ba532279d1a1..7fa1ac4de7d8 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -738,11 +738,17 @@ static int clk_misc_init(void) __raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET); - /* Extra fec clock setting */ - reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET); - reg &= ~BM_CLKCTRL_ENET_SLEEP; - reg |= BM_CLKCTRL_ENET_CLK_OUT_EN; - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET); + /* + * Extra fec clock setting + * The DENX M28 uses an external clock source + * and the clock output must not be enabled + */ + if (!machine_is_m28evk()) { + reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET); + reg &= ~BM_CLKCTRL_ENET_SLEEP; + reg |= BM_CLKCTRL_ENET_CLK_OUT_EN; + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET); + } /* * 480 MHz seems too high to be ssp clock source directly, diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index 5aa5f754c846..0d2d2b470998 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -33,6 +33,7 @@ 0) #define cpu_is_mx28() ( \ machine_is_mx28evk() || \ + machine_is_m28evk() || \ machine_is_tx28() || \ 0) diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h index 7f8bf6539646..67776746f143 100644 --- a/arch/arm/mach-mxs/include/mach/uncompress.h +++ b/arch/arm/mach-mxs/include/mach/uncompress.h @@ -63,6 +63,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) mxs_duart_base = MX23_DUART_BASE_ADDR; break; case MACH_TYPE_MX28EVK: + case MACH_TYPE_M28EVK: case MACH_TYPE_TX28: mxs_duart_base = MX28_DUART_BASE_ADDR; break; diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c new file mode 100644 index 000000000000..3b1681e4f49a --- /dev/null +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -0,0 +1,366 @@ +/* + * Copyright (C) 2011 + * Stefano Babic, DENX Software Engineering, <sbabic@denx.de> + * + * based on: mach-mx28_evk.c + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/iomux-mx28.h> + +#include "devices-mx28.h" + +#define M28EVK_GPIO_USERLED1 MXS_GPIO_NR(3, 16) +#define M28EVK_GPIO_USERLED2 MXS_GPIO_NR(3, 17) + +#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18) +#define M28EVK_LCD_ENABLE MXS_GPIO_NR(3, 28) + +#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12) +#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28) + +static const iomux_cfg_t m28evk_pads[] __initconst = { + /* duart */ + MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL, + MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL, + + /* auart0 */ + MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, + MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, + + /* auart3 */ + MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL, + MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL, + MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL, + MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL, + +#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) + /* fec0 */ + MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, + /* fec1 */ + MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC, + MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC, + + /* flexcan0 */ + MX28_PAD_GPMI_RDY2__CAN0_TX, + MX28_PAD_GPMI_RDY3__CAN0_RX, + + /* flexcan1 */ + MX28_PAD_GPMI_CE2N__CAN1_TX, + MX28_PAD_GPMI_CE3N__CAN1_RX, + + /* I2C */ + MX28_PAD_I2C0_SCL__I2C0_SCL, + MX28_PAD_I2C0_SDA__I2C0_SDA, + + /* mxsfb (lcdif) */ + MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL, + MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL, + MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL, + MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL, + MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL, + MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL, + MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL, + MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL, + MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL, + MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL, + MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, + MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, + MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, + MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, + MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, + MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, + MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, + MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, + MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL, + MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL, + MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL, + MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL, + MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL, + MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL, + + MX28_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL, + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL, + + /* mmc0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA1__SSP0_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA2__SSP0_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA3__SSP0_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA4__SSP0_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA5__SSP0_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA6__SSP0_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA7__SSP0_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_CMD__SSP0_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* mmc1 */ + MX28_PAD_GPMI_D00__SSP1_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D01__SSP1_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D02__SSP1_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D03__SSP1_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D04__SSP1_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D05__SSP1_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D06__SSP1_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D07__SSP1_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_RDY1__SSP1_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_WRN__SSP1_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* write protect */ + MX28_PAD_GPMI_RESETN__GPIO_0_28 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* slot power enable */ + MX28_PAD_PWM4__GPIO_3_29 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* led */ + MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL, + MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL, + + /* nand */ + MX28_PAD_GPMI_D00__GPMI_D0 | + (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_D01__GPMI_D1 | + (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_D02__GPMI_D2 | + (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_D03__GPMI_D3 | + (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_D04__GPMI_D4 | + (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_D05__GPMI_D5 | + (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_D06__GPMI_D6 | + (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_D07__GPMI_D7 | + (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_CE0N__GPMI_CE0N | + (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_RDY0__GPMI_READY0 | + (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_RDN__GPMI_RDN | + (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_WRN__GPMI_WRN | + (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_ALE__GPMI_ALE | + (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_CLE__GPMI_CLE | + (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_RESETN__GPMI_RESETN | + (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), + + /* Backlight */ + MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL, +}; + +/* led */ +static const struct gpio_led m28evk_leds[] __initconst = { + { + .name = "user-led1", + .default_trigger = "heartbeat", + .gpio = M28EVK_GPIO_USERLED1, + }, + { + .name = "user-led2", + .default_trigger = "heartbeat", + .gpio = M28EVK_GPIO_USERLED2, + }, +}; + +static const struct gpio_led_platform_data m28evk_led_data __initconst = { + .leds = m28evk_leds, + .num_leds = ARRAY_SIZE(m28evk_leds), +}; + +static struct fec_platform_data mx28_fec_pdata[] __initdata = { + { + /* fec0 */ + .phy = PHY_INTERFACE_MODE_RMII, + }, { + /* fec1 */ + .phy = PHY_INTERFACE_MODE_RMII, + }, +}; + +static int __init m28evk_fec_get_mac(void) +{ + int i; + u32 val; + const u32 *ocotp = mxs_get_ocotp(); + + if (!ocotp) { + pr_err("%s: timeout when reading fec mac from OCOTP\n", + __func__); + return -ETIMEDOUT; + } + + /* + * OCOTP only stores the last 4 octets for each mac address, + * so hard-code DENX OUI (C0:E5:4E) here. + */ + for (i = 0; i < 2; i++) { + val = ocotp[i * 4]; + mx28_fec_pdata[i].mac[0] = 0xC0; + mx28_fec_pdata[i].mac[1] = 0xE5; + mx28_fec_pdata[i].mac[2] = 0x4E; + mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff; + mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff; + mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff; + } + + return 0; +} + +/* mxsfb (lcdif) */ +static struct fb_videomode m28evk_video_modes[] = { + { + .name = "Ampire AM-800480R2TMQW-T01H", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 30066, /* picosecond (33.26 MHz) */ + .left_margin = 0, + .right_margin = 256, + .upper_margin = 0, + .lower_margin = 45, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT, + }, +}; + +static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = { + .mode_list = m28evk_video_modes, + .mode_count = ARRAY_SIZE(m28evk_video_modes), + .default_bpp = 16, + .ld_intf_width = STMLCDIF_18BIT, +}; + +static struct at24_platform_data m28evk_eeprom = { + .byte_len = 16384, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = { + { + I2C_BOARD_INFO("at24", 0x51), /* E0=1, E1=0, E2=0 */ + .platform_data = &m28evk_eeprom, + }, +}; + +static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = { + { + /* mmc0 */ + .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT, + .flags = SLOTF_8_BIT_CAPABLE, + }, { + /* mmc1 */ + .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT, + .flags = SLOTF_8_BIT_CAPABLE, + }, +}; + +static void __init m28evk_init(void) +{ + mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads)); + + mx28_add_duart(); + mx28_add_auart0(); + mx28_add_auart3(); + + if (!m28evk_fec_get_mac()) { + mx28_add_fec(0, &mx28_fec_pdata[0]); + mx28_add_fec(1, &mx28_fec_pdata[1]); + } + + mx28_add_flexcan(0, NULL); + mx28_add_flexcan(1, NULL); + + mx28_add_mxsfb(&m28evk_mxsfb_pdata); + + mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]); + mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]); + + gpio_led_register_device(0, &m28evk_led_data); + + /* I2C */ + mx28_add_mxs_i2c(0); + i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo, + ARRAY_SIZE(m28_stk5v3_i2c_boardinfo)); +} + +static void __init m28evk_timer_init(void) +{ + mx28_clocks_init(); +} + +static struct sys_timer m28evk_timer = { + .init = m28evk_timer_init, +}; + +MACHINE_START(M28EVK, "DENX M28 EVK") + .map_io = mx28_map_io, + .init_irq = mx28_init_irq, + .init_machine = m28evk_init, + .timer = &m28evk_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c index 8dc05763a7eb..c7047838e112 100644 --- a/arch/arm/mach-s3c64xx/cpu.c +++ b/arch/arm/mach-s3c64xx/cpu.c @@ -44,16 +44,16 @@ static const char name_s3c6410[] = "S3C6410"; static struct cpu_table cpu_ids[] __initdata = { { - .idcode = 0x36400000, - .idmask = 0xfffff000, + .idcode = S3C6400_CPU_ID, + .idmask = S3C64XX_CPU_MASK, .map_io = s3c6400_map_io, .init_clocks = s3c6400_init_clocks, .init_uarts = s3c6400_init_uarts, .init = s3c6400_init, .name = name_s3c6400, }, { - .idcode = 0x36410100, - .idmask = 0xffffff00, + .idcode = S3C6410_CPU_ID, + .idmask = S3C64XX_CPU_MASK, .map_io = s3c6410_map_io, .init_clocks = s3c6410_init_clocks, .init_uarts = s3c6410_init_uarts, @@ -141,23 +141,15 @@ void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) { - unsigned long idcode; - /* initialise the io descriptors we need for initialisation */ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); iotable_init(mach_desc, size); init_consistent_dma_size(SZ_8M); - idcode = __raw_readl(S3C_VA_SYS + 0x118); - if (!idcode) { - /* S3C6400 has the ID register in a different place, - * and needs a write before it can be read. */ - - __raw_writel(0x0, S3C_VA_SYS + 0xA1C); - idcode = __raw_readl(S3C_VA_SYS + 0xA1C); - } + /* detect cpu id */ + s3c64xx_init_cpu(); - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } static __init int s3c64xx_sysdev_init(void) diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c index ac825e826326..1fd9c79c7dbc 100644 --- a/arch/arm/mach-s5p64x0/dev-spi.c +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -21,6 +21,7 @@ #include <mach/regs-clock.h> #include <mach/spi-clocks.h> +#include <plat/cpu.h> #include <plat/s3c64xx-spi.h> #include <plat/gpio-cfg.h> @@ -185,11 +186,8 @@ struct platform_device s5p64x0_device_spi1 = { void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) { - unsigned int id; struct s3c64xx_spi_info *pd; - id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; - /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0 || src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) { @@ -199,7 +197,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) switch (cntrlr) { case 0: - if (id == 0x50000) + if (soc_is_s5p6450()) pd = &s5p6450_spi0_pdata; else pd = &s5p6440_spi0_pdata; @@ -207,7 +205,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) s5p64x0_device_spi0.dev.platform_data = pd; break; case 1: - if (id == 0x50000) + if (soc_is_s5p6450()) pd = &s5p6450_spi1_pdata; else pd = &s5p6440_spi1_pdata; diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index d7ad944b3475..0e5b3e63e5b3 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -28,6 +28,7 @@ #include <mach/irqs.h> #include <mach/regs-clock.h> +#include <plat/cpu.h> #include <plat/devs.h> #include <plat/s3c-pl330-pdata.h> @@ -133,11 +134,7 @@ static struct platform_device s5p64x0_device_pdma = { static int __init s5p64x0_dma_init(void) { - unsigned int id; - - id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; - - if (id == 0x50000) + if (soc_is_s5p6450()) s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; else s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c index e7fb3b004e77..700dac6c43f3 100644 --- a/arch/arm/mach-s5p64x0/gpiolib.c +++ b/arch/arm/mach-s5p64x0/gpiolib.c @@ -19,6 +19,7 @@ #include <mach/regs-gpio.h> #include <mach/regs-clock.h> +#include <plat/cpu.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> @@ -473,14 +474,10 @@ static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, static int __init s5p64x0_gpiolib_init(void) { - unsigned int chipid; - - chipid = __raw_readl(S5P64X0_SYS_ID); - s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs, ARRAY_SIZE(s5p64x0_gpio_cfgs)); - if ((chipid & 0xff000) == 0x50000) { + if (soc_is_s5p6450()) { samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit, ARRAY_SIZE(s5p6450_gpio_2bit)); diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c index fe7380f5c3cd..494e1a8f6f6d 100644 --- a/arch/arm/mach-s5p64x0/irq-eint.c +++ b/arch/arm/mach-s5p64x0/irq-eint.c @@ -17,6 +17,7 @@ #include <linux/irq.h> #include <linux/io.h> +#include <plat/cpu.h> #include <plat/regs-irqtype.h> #include <plat/gpio-cfg.h> @@ -67,7 +68,7 @@ static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type) __raw_writel(ctrl, S5P64X0_EINT0CON0); /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */ - if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000)) + if (soc_is_s5p6450()) s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2)); else s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2)); diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index 93c793f48caf..f0bdc5e3fe52 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -49,7 +49,8 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { .membase = IO_ADDRESS(TEGRA_UARTD_BASE), .mapbase = TEGRA_UARTD_BASE, .irq = INT_UARTD, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, + .type = PORT_TEGRA, .iotype = UPIO_MEM, .regshift = 2, .uartclk = 216000000, @@ -117,6 +118,7 @@ static struct platform_device *harmony_devices[] __initdata = { &tegra_sdhci_device1, &tegra_sdhci_device2, &tegra_sdhci_device4, + &tegra_ehci3_device, &tegra_i2s_device1, &tegra_das_device, &tegra_pcm_device, @@ -140,6 +142,7 @@ static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = { { "pll_a_out0", "pll_a", 11289600, true }, { "cdev1", NULL, 0, true }, { "i2s1", "pll_a_out0", 11289600, false}, + { "usb3", "clk_m", 12000000, true }, { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c index bdd2627dd87b..22257697d3ee 100644 --- a/arch/arm/mach-tegra/board-paz00-pinmux.c +++ b/arch/arm/mach-tegra/board-paz00-pinmux.c @@ -145,6 +145,9 @@ static struct tegra_gpio_table gpio_table[] = { { .gpio = TEGRA_GPIO_SD1_WP, .enable = true }, { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true }, { .gpio = TEGRA_ULPI_RST, .enable = true }, + { .gpio = TEGRA_WIFI_PWRN, .enable = true }, + { .gpio = TEGRA_WIFI_RST, .enable = true }, + { .gpio = TEGRA_WIFI_LED, .enable = true }, }; void paz00_pinmux_init(void) diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index fbc9e0ed926e..55c55ba89f1e 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -26,6 +26,8 @@ #include <linux/pda_power.h> #include <linux/io.h> #include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/rfkill-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -35,7 +37,6 @@ #include <mach/iomap.h> #include <mach/irqs.h> #include <mach/sdhci.h> -#include <mach/gpio.h> #include "board.h" #include "board-paz00.h" @@ -45,10 +46,22 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { { + /* serial port on JP1 */ + .membase = IO_ADDRESS(TEGRA_UARTA_BASE), + .mapbase = TEGRA_UARTA_BASE, + .irq = INT_UARTA, + .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, + .type = PORT_TEGRA, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 216000000, + }, { + /* serial port on mini-pcie */ .membase = IO_ADDRESS(TEGRA_UARTD_BASE), .mapbase = TEGRA_UARTD_BASE, .irq = INT_UARTD, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, + .type = PORT_TEGRA, .iotype = UPIO_MEM, .regshift = 2, .uartclk = 216000000, @@ -65,10 +78,48 @@ static struct platform_device debug_uart = { }, }; +static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = { + .name = "wifi_rfkill", + .reset_gpio = TEGRA_WIFI_RST, + .shutdown_gpio = TEGRA_WIFI_PWRN, + .type = RFKILL_TYPE_WLAN, +}; + +static struct platform_device wifi_rfkill_device = { + .name = "rfkill_gpio", + .id = -1, + .dev = { + .platform_data = &wifi_rfkill_platform_data, + }, +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "wifi-led", + .default_trigger = "rfkill0", + .gpio = TEGRA_WIFI_LED, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + static struct platform_device *paz00_devices[] __initdata = { &debug_uart, - &tegra_sdhci_device1, &tegra_sdhci_device4, + &tegra_sdhci_device1, + &wifi_rfkill_device, + &leds_gpio, }; static void paz00_i2c_init(void) @@ -94,7 +145,14 @@ static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline, static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { /* name parent rate enabled */ + { "uarta", "pll_p", 216000000, true }, { "uartd", "pll_p", 216000000, true }, + + { "pll_p_out4", "pll_p", 24000000, true }, + { "usbd", "clk_m", 12000000, false }, + { "usb2", "clk_m", 12000000, false }, + { "usb3", "clk_m", 12000000, false }, + { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index 42ce8639b90c..8aff06eb58c3 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -19,11 +19,19 @@ #include <mach/gpio-tegra.h> +/* SDCARD */ #define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 #define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 #define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 + +/* ULPI */ #define TEGRA_ULPI_RST TEGRA_GPIO_PV0 +/* WIFI */ +#define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5 +#define TEGRA_WIFI_RST TEGRA_GPIO_PD1 +#define TEGRA_WIFI_LED TEGRA_GPIO_PD0 + void paz00_pinmux_init(void); #endif diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c index 0bda495e9742..74f78b7e3f19 100644 --- a/arch/arm/mach-tegra/board-seaboard-pinmux.c +++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c @@ -49,7 +49,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, @@ -133,7 +133,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, @@ -167,6 +167,8 @@ static struct tegra_gpio_table gpio_table[] = { { .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true }, { .gpio = TEGRA_GPIO_POWERKEY, .enable = true }, { .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true }, + { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true }, + { .gpio = TEGRA_GPIO_USB1, .enable = true }, }; void __init seaboard_pinmux_init(void) diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c index 9e98ac706f40..bf13ea355efc 100644 --- a/arch/arm/mach-tegra/board-seaboard.c +++ b/arch/arm/mach-tegra/board-seaboard.c @@ -25,9 +25,12 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> +#include <sound/wm8903.h> + #include <mach/iomap.h> #include <mach/irqs.h> #include <mach/sdhci.h> +#include <mach/tegra_wm8903_pdata.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -41,7 +44,8 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { { /* Memory and IRQ filled in before registration */ - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, + .type = PORT_TEGRA, .iotype = UPIO_MEM, .regshift = 2, .uartclk = 216000000, @@ -62,6 +66,12 @@ static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = { /* name parent rate enabled */ { "uartb", "pll_p", 216000000, true}, { "uartd", "pll_p", 216000000, true}, + { "pll_a", "pll_p_out1", 56448000, true }, + { "pll_a_out0", "pll_a", 11289600, true }, + { "cdev1", NULL, 0, true }, + { "i2s1", "pll_a_out0", 11289600, false}, + { "usbd", "clk_m", 12000000, true}, + { "usb3", "clk_m", 12000000, true}, { NULL, NULL, 0, 0}, }; @@ -117,6 +127,22 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = { .is_8bit = 1, }; +static struct tegra_wm8903_platform_data seaboard_audio_pdata = { + .gpio_spkr_en = TEGRA_GPIO_SPKR_EN, + .gpio_hp_det = TEGRA_GPIO_HP_DET, + .gpio_hp_mute = -1, + .gpio_int_mic_en = -1, + .gpio_ext_mic_en = -1, +}; + +static struct platform_device seaboard_audio_device = { + .name = "tegra-snd-wm8903", + .id = 0, + .dev = { + .platform_data = &seaboard_audio_pdata, + }, +}; + static struct platform_device *seaboard_devices[] __initdata = { &debug_uart, &tegra_pmu_device, @@ -124,6 +150,10 @@ static struct platform_device *seaboard_devices[] __initdata = { &tegra_sdhci_device3, &tegra_sdhci_device1, &seaboard_gpio_keys_device, + &tegra_i2s_device1, + &tegra_das_device, + &tegra_pcm_device, + &seaboard_audio_device, }; static struct i2c_board_info __initdata isl29018_device = { @@ -135,12 +165,56 @@ static struct i2c_board_info __initdata adt7461_device = { I2C_BOARD_INFO("adt7461", 0x4c), }; +static struct wm8903_platform_data wm8903_pdata = { + .irq_active_low = 0, + .micdet_cfg = 0, + .micdet_delay = 100, + .gpio_base = SEABOARD_GPIO_WM8903(0), + .gpio_cfg = { + WM8903_GPIO_NO_CONFIG, + WM8903_GPIO_NO_CONFIG, + 0, + WM8903_GPIO_NO_CONFIG, + WM8903_GPIO_NO_CONFIG, + }, +}; + +static struct i2c_board_info __initdata wm8903_device = { + I2C_BOARD_INFO("wm8903", 0x1a), + .platform_data = &wm8903_pdata, + .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ), +}; + +static int seaboard_ehci_init(void) +{ + int gpio_status; + + gpio_status = gpio_request(TEGRA_GPIO_USB1, "VBUS_USB1"); + if (gpio_status < 0) { + pr_err("VBUS_USB1 request GPIO FAILED\n"); + WARN_ON(1); + } + + gpio_status = gpio_direction_output(TEGRA_GPIO_USB1, 1); + if (gpio_status < 0) { + pr_err("VBUS_USB1 request GPIO DIRECTION FAILED\n"); + WARN_ON(1); + } + gpio_set_value(TEGRA_GPIO_USB1, 1); + + platform_device_register(&tegra_ehci1_device); + platform_device_register(&tegra_ehci3_device); + + return 0; +} + static void __init seaboard_i2c_init(void) { gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018"); gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ); i2c_register_board_info(0, &isl29018_device, 1); + i2c_register_board_info(0, &wm8903_device, 1); i2c_register_board_info(3, &adt7461_device, 1); @@ -161,6 +235,8 @@ static void __init seaboard_common_init(void) tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices)); + + seaboard_ehci_init(); } static void __init tegra_seaboard_init(void) @@ -182,6 +258,9 @@ static void __init tegra_kaen_init(void) debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE; debug_uart_platform_data[0].irq = INT_UARTB; + seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE; + tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE); + seaboard_common_init(); seaboard_i2c_init(); diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h index 15b6c57361be..4c45d4ca3c49 100644 --- a/arch/arm/mach-tegra/board-seaboard.h +++ b/arch/arm/mach-tegra/board-seaboard.h @@ -19,6 +19,9 @@ #include <mach/gpio-tegra.h> +#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_)) +#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_)) + #define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5 #define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1 #define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6 @@ -33,10 +36,11 @@ #define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5 #define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2 #define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3 - -#define TPS_GPIO_BASE TEGRA_NR_GPIOS - -#define TPS_GPIO_WWAN_PWR (TPS_GPIO_BASE + 2) +#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS6586X(2) +#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3 +#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2) +#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1 +#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5 void seaboard_pinmux_init(void); diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c index e3d9ec2f0fe1..1a6617b7806f 100644 --- a/arch/arm/mach-tegra/board-trimslice.c +++ b/arch/arm/mach-tegra/board-trimslice.c @@ -32,7 +32,6 @@ #include <mach/iomap.h> #include <mach/sdhci.h> -#include <mach/gpio.h> #include "board.h" #include "clock.h" @@ -46,7 +45,8 @@ static struct plat_serial8250_port debug_uart_platform_data[] = { .membase = IO_ADDRESS(TEGRA_UARTA_BASE), .mapbase = TEGRA_UARTA_BASE, .irq = INT_UARTA, - .flags = UPF_BOOT_AUTOCONF, + .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, + .type = PORT_TEGRA, .iotype = UPIO_MEM, .regshift = 2, .uartclk = 216000000, diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index c1fc6c6fac72..3c6335307fb1 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -215,19 +215,18 @@ static void s3c24xx_pm_restart(char mode, const char *cmd) void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { - unsigned long idcode = 0x0; - /* initialise the io descriptors we need for initialisation */ iotable_init(mach_desc, size); iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); if (cpu_architecture() >= CPU_ARCH_ARMv5) { - idcode = s3c24xx_read_idcode_v5(); + samsung_cpu_id = s3c24xx_read_idcode_v5(); } else { - idcode = s3c24xx_read_idcode_v4(); + samsung_cpu_id = s3c24xx_read_idcode_v4(); } + s3c24xx_init_cpu(); arm_pm_restart = s3c24xx_pm_restart; - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index bbc2aa7449ca..7b0a28f73a68 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -33,48 +33,66 @@ static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; static const char name_exynos4210[] = "EXYNOS4210"; +static const char name_exynos4212[] = "EXYNOS4212"; +static const char name_exynos4412[] = "EXYNOS4412"; static struct cpu_table cpu_ids[] __initdata = { { - .idcode = 0x56440100, - .idmask = 0xfffff000, + .idcode = S5P6440_CPU_ID, + .idmask = S5P64XX_CPU_MASK, .map_io = s5p6440_map_io, .init_clocks = s5p6440_init_clocks, .init_uarts = s5p6440_init_uarts, .init = s5p64x0_init, .name = name_s5p6440, }, { - .idcode = 0x36450000, - .idmask = 0xfffff000, + .idcode = S5P6450_CPU_ID, + .idmask = S5P64XX_CPU_MASK, .map_io = s5p6450_map_io, .init_clocks = s5p6450_init_clocks, .init_uarts = s5p6450_init_uarts, .init = s5p64x0_init, .name = name_s5p6450, }, { - .idcode = 0x43100000, - .idmask = 0xfffff000, + .idcode = S5PC100_CPU_ID, + .idmask = S5PC100_CPU_MASK, .map_io = s5pc100_map_io, .init_clocks = s5pc100_init_clocks, .init_uarts = s5pc100_init_uarts, .init = s5pc100_init, .name = name_s5pc100, }, { - .idcode = 0x43110000, - .idmask = 0xfffff000, + .idcode = S5PV210_CPU_ID, + .idmask = S5PV210_CPU_MASK, .map_io = s5pv210_map_io, .init_clocks = s5pv210_init_clocks, .init_uarts = s5pv210_init_uarts, .init = s5pv210_init, .name = name_s5pv210, }, { - .idcode = 0x43210000, - .idmask = 0xfffe0000, + .idcode = EXYNOS4210_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, .init_uarts = exynos4_init_uarts, .init = exynos4_init, .name = name_exynos4210, + }, { + .idcode = EXYNOS4212_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos4_init, + .name = name_exynos4212, + }, { + .idcode = EXYNOS4412_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos4_init, + .name = name_exynos4412, }, }; @@ -114,13 +132,13 @@ static struct map_desc s5p_iodesc[] __initdata = { void __init s5p_init_io(struct map_desc *mach_desc, int size, void __iomem *cpuid_addr) { - unsigned long idcode; - /* initialize the io descriptors we need for initialization */ iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc)); if (mach_desc) iotable_init(mach_desc, size); - idcode = __raw_readl(cpuid_addr); - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); + /* detect cpu id and rev. */ + s5p_init_cpu(cpuid_addr); + + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h index 907caab53dcf..f680a143e38c 100644 --- a/arch/arm/plat-s5p/include/plat/exynos4.h +++ b/arch/arm/plat-s5p/include/plat/exynos4.h @@ -14,10 +14,11 @@ extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void exynos4_register_clocks(void); +extern void exynos4210_register_clocks(void); +extern void exynos4212_register_clocks(void); extern void exynos4_setup_clocks(void); -#ifdef CONFIG_CPU_EXYNOS4210 - +#ifdef CONFIG_ARCH_EXYNOS4 extern int exynos4_init(void); extern void exynos4_init_irq(void); extern void exynos4_map_io(void); diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h index ebc142c5c84c..3e21b9444cc5 100644 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ b/arch/arm/plat-s5p/include/plat/pll.h @@ -12,6 +12,59 @@ * published by the Free Software Foundation. */ +#include <asm/div64.h> + +#define PLL35XX_MDIV_MASK (0x3FF) +#define PLL35XX_PDIV_MASK (0x3F) +#define PLL35XX_SDIV_MASK (0x7) +#define PLL35XX_MDIV_SHIFT (16) +#define PLL35XX_PDIV_SHIFT (8) +#define PLL35XX_SDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK; + pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK; + sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +#define PLL36XX_KDIV_MASK (0xFFFF) +#define PLL36XX_MDIV_MASK (0x1FF) +#define PLL36XX_PDIV_MASK (0x3F) +#define PLL36XX_SDIV_MASK (0x7) +#define PLL36XX_MDIV_SHIFT (16) +#define PLL36XX_PDIV_SHIFT (8) +#define PLL36XX_SDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll36xx(unsigned long baseclk, + u32 pll_con0, u32 pll_con1) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; + pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; + sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK; + kdiv = pll_con1 & PLL36XX_KDIV_MASK; + + tmp = baseclk; + + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} + #define PLL45XX_MDIV_MASK (0x3FF) #define PLL45XX_PDIV_MASK (0x3F) #define PLL45XX_SDIV_MASK (0x7) @@ -19,8 +72,6 @@ #define PLL45XX_PDIV_SHIFT (8) #define PLL45XX_SDIV_SHIFT (0) -#include <asm/div64.h> - enum pll45xx_type_t { pll_4500, pll_4502, diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 1105922342fe..09adb84f2718 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -11,7 +11,7 @@ obj- := # Objects we always build independent of SoC choice -obj-y += init.o +obj-y += init.o cpu.o obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o obj-y += clock.o obj-y += pwm-clock.o diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c new file mode 100644 index 000000000000..81c06d44c11e --- /dev/null +++ b/arch/arm/plat-samsung/cpu.c @@ -0,0 +1,58 @@ +/* linux/arch/arm/plat-samsung/cpu.c + * + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung CPU Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/system.h> + +#include <mach/map.h> +#include <plat/cpu.h> + +unsigned long samsung_cpu_id; +static unsigned int samsung_cpu_rev; + +unsigned int samsung_rev(void) +{ + return samsung_cpu_rev; +} +EXPORT_SYMBOL(samsung_rev); + +void __init s3c24xx_init_cpu(void) +{ + /* nothing here yet */ + + samsung_cpu_rev = 0; +} + +void __init s3c64xx_init_cpu(void) +{ + samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118); + if (!samsung_cpu_id) { + /* + * S3C6400 has the ID register in a different place, + * and needs a write before it can be read. + */ + __raw_writel(0x0, S3C_VA_SYS + 0xA1C); + samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C); + } + + samsung_cpu_rev = 0; +} + +void __init s5p_init_cpu(void __iomem *cpuid_addr) +{ + samsung_cpu_id = __raw_readl(cpuid_addr); + samsung_cpu_rev = samsung_cpu_id & 0xFF; +} diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index c0a5741b23e6..54f370f0fc07 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -1,9 +1,12 @@ /* linux/arch/arm/plat-samsung/include/plat/cpu.h * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * Header file for S3C24XX CPU support + * Header file for Samsung CPU support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,6 +18,108 @@ #ifndef __SAMSUNG_PLAT_CPU_H #define __SAMSUNG_PLAT_CPU_H +extern unsigned long samsung_cpu_id; + +#define S3C24XX_CPU_ID 0x32400000 +#define S3C24XX_CPU_MASK 0xFFF00000 + +#define S3C6400_CPU_ID 0x36400000 +#define S3C6410_CPU_ID 0x36410000 +#define S3C64XX_CPU_ID (S3C6400_CPU_ID & S3C6410_CPU_ID) +#define S3C64XX_CPU_MASK 0xFFFFF000 + +#define S5P6440_CPU_ID 0x56440000 +#define S5P6450_CPU_ID 0x36450000 +#define S5P64XX_CPU_MASK 0xFFFFF000 + +#define S5PC100_CPU_ID 0x43100000 +#define S5PC100_CPU_MASK 0xFFFFF000 + +#define S5PV210_CPU_ID 0x43110000 +#define S5PV210_CPU_MASK 0xFFFFF000 + +#define EXYNOS4210_CPU_ID 0x43210000 +#define EXYNOS4212_CPU_ID 0x43220000 +#define EXYNOS4412_CPU_ID 0xE4412200 +#define EXYNOS4_CPU_MASK 0xFFFE0000 + +#define IS_SAMSUNG_CPU(name, id, mask) \ +static inline int is_samsung_##name(void) \ +{ \ + return ((samsung_cpu_id & mask) == (id & mask)); \ +} + +IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK) +IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK) +IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK) +IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK) +IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK) +IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK) +IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ + defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \ + defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \ + defined(CONFIG_CPU_S3C2443) +# define soc_is_s3c24xx() is_samsung_s3c24xx() +#else +# define soc_is_s3c24xx() 0 +#endif + +#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) +# define soc_is_s3c64xx() is_samsung_s3c64xx() +#else +# define soc_is_s3c64xx() 0 +#endif + +#if defined(CONFIG_CPU_S5P6440) +# define soc_is_s5p6440() is_samsung_s5p6440() +#else +# define soc_is_s5p6440() 0 +#endif + +#if defined(CONFIG_CPU_S5P6450) +# define soc_is_s5p6450() is_samsung_s5p6450() +#else +# define soc_is_s5p6450() 0 +#endif + +#if defined(CONFIG_CPU_S5PC100) +# define soc_is_s5pc100() is_samsung_s5pc100() +#else +# define soc_is_s5pc100() 0 +#endif + +#if defined(CONFIG_CPU_S5PV210) +# define soc_is_s5pv210() is_samsung_s5pv210() +#else +# define soc_is_s5pv210() 0 +#endif + +#if defined(CONFIG_CPU_EXYNOS4210) +# define soc_is_exynos4210() is_samsung_exynos4210() +#else +# define soc_is_exynos4210() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4212) +# define soc_is_exynos4212() is_samsung_exynos4212() +#else +# define soc_is_exynos4212() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4412) +# define soc_is_exynos4412() is_samsung_exynos4412() +#else +# define soc_is_exynos4412() 0 +#endif + +#define EXYNOS4210_REV_0 (0x0) +#define EXYNOS4210_REV_1_0 (0x10) +#define EXYNOS4210_REV_1_1 (0x11) + #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef MHZ @@ -55,6 +160,12 @@ extern void s3c64xx_init_io(struct map_desc *mach_desc, int size); extern void s5p_init_io(struct map_desc *mach_desc, int size, void __iomem *cpuid_addr); +extern void s3c24xx_init_cpu(void); +extern void s3c64xx_init_cpu(void); +extern void s5p_init_cpu(void __iomem *cpuid_addr); + +extern unsigned int samsung_rev(void); + extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c24xx_init_clocks(int xtal); |