summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/mips/Makefile2
-rw-r--r--arch/mips/boot/dts/mti/malta.dts3
-rw-r--r--arch/mips/generic/init.c16
-rw-r--r--arch/mips/include/asm/fpu_emulator.h13
-rw-r--r--arch/mips/include/asm/switch_to.h18
-rw-r--r--arch/mips/kernel/mips-cpc.c11
-rw-r--r--arch/mips/kernel/mips-r2-to-r6-emul.c10
-rw-r--r--arch/mips/kernel/ptrace.c8
-rw-r--r--arch/mips/kernel/r2300_fpu.S138
-rw-r--r--arch/mips/kernel/r6000_fpu.S89
-rw-r--r--arch/mips/kernel/relocate.c2
-rw-r--r--arch/mips/kernel/setup.c13
-rw-r--r--arch/mips/kernel/traps.c137
-rw-r--r--arch/mips/lib/dump_tlb.c44
-rw-r--r--arch/mips/lib/r3k_dump_tlb.c18
15 files changed, 287 insertions, 235 deletions
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index fbf40d3c8123..1a6bac7b076f 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -263,7 +263,7 @@ KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \
VMLINUX_ENTRY_ADDRESS=$(entry-y) \
- PLATFORM=$(platform-y)
+ PLATFORM="$(platform-y)"
ifdef CONFIG_32BIT
bootvars-y += ADDR_BITS=32
endif
diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts
index f604a272d91d..ffe3a1508e72 100644
--- a/arch/mips/boot/dts/mti/malta.dts
+++ b/arch/mips/boot/dts/mti/malta.dts
@@ -84,12 +84,13 @@
fpga_regs: system-controller@1f000000 {
compatible = "mti,malta-fpga", "syscon", "simple-mfd";
reg = <0x1f000000 0x1000>;
+ native-endian;
reboot {
compatible = "syscon-reboot";
regmap = <&fpga_regs>;
offset = <0x500>;
- mask = <0x4d>;
+ mask = <0x42>;
};
};
diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c
index 0ea73e845440..d493ccbf274a 100644
--- a/arch/mips/generic/init.c
+++ b/arch/mips/generic/init.c
@@ -30,9 +30,19 @@ static __initdata const void *mach_match_data;
void __init prom_init(void)
{
+ plat_get_fdt();
+ BUG_ON(!fdt);
+}
+
+void __init *plat_get_fdt(void)
+{
const struct mips_machine *check_mach;
const struct of_device_id *match;
+ if (fdt)
+ /* Already set up */
+ return (void *)fdt;
+
if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) {
/*
* We booted using the UHI boot protocol, so we have been
@@ -75,12 +85,6 @@ void __init prom_init(void)
/* Retrieve the machine's FDT */
fdt = mach->fdt;
}
-
- BUG_ON(!fdt);
-}
-
-void __init *plat_get_fdt(void)
-{
return (void *)fdt;
}
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
index 355dc25172e7..c05369e0b8d6 100644
--- a/arch/mips/include/asm/fpu_emulator.h
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -63,6 +63,8 @@ do { \
extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
struct mips_fpu_struct *ctx, int has_fpu,
void *__user *fault_addr);
+void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
+ struct task_struct *tsk);
int process_fpemu_return(int sig, void __user *fault_addr,
unsigned long fcr31);
int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
@@ -81,4 +83,15 @@ static inline void fpu_emulator_init_fpu(void)
set_fpr64(&t->thread.fpu.fpr[i], 0, SIGNALLING_NAN);
}
+/*
+ * Mask the FCSR Cause bits according to the Enable bits, observing
+ * that Unimplemented is always enabled.
+ */
+static inline unsigned long mask_fcr31_x(unsigned long fcr31)
+{
+ return fcr31 & (FPU_CSR_UNI_X |
+ ((fcr31 & FPU_CSR_ALL_E) <<
+ (ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E))));
+}
+
#endif /* _ASM_FPU_EMULATOR_H */
diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h
index ebb5c0f2f90d..c0ae27971e31 100644
--- a/arch/mips/include/asm/switch_to.h
+++ b/arch/mips/include/asm/switch_to.h
@@ -76,6 +76,22 @@ do { if (cpu_has_rw_llb) { \
} while (0)
/*
+ * Check FCSR for any unmasked exceptions pending set with `ptrace',
+ * clear them and send a signal.
+ */
+#define __sanitize_fcr31(next) \
+do { \
+ unsigned long fcr31 = mask_fcr31_x(next->thread.fpu.fcr31); \
+ void __user *pc; \
+ \
+ if (unlikely(fcr31)) { \
+ pc = (void __user *)task_pt_regs(next)->cp0_epc; \
+ next->thread.fpu.fcr31 &= ~fcr31; \
+ force_fcr31_sig(fcr31, pc, next); \
+ } \
+} while (0)
+
+/*
* For newly created kernel threads switch_to() will return to
* ret_from_kernel_thread, newly created user threads to ret_from_fork.
* That is, everything following resume() will be skipped for new threads.
@@ -85,6 +101,8 @@ do { if (cpu_has_rw_llb) { \
do { \
__mips_mt_fpaff_switch_to(prev); \
lose_fpu_inatomic(1, prev); \
+ if (tsk_used_math(next)) \
+ __sanitize_fcr31(next); \
if (cpu_has_dsp) { \
__save_dsp(prev); \
__restore_dsp(next); \
diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c
index 2a45867d3b4f..a4964c334cab 100644
--- a/arch/mips/kernel/mips-cpc.c
+++ b/arch/mips/kernel/mips-cpc.c
@@ -21,6 +21,11 @@ static DEFINE_PER_CPU_ALIGNED(spinlock_t, cpc_core_lock);
static DEFINE_PER_CPU_ALIGNED(unsigned long, cpc_core_lock_flags);
+phys_addr_t __weak mips_cpc_default_phys_base(void)
+{
+ return 0;
+}
+
/**
* mips_cpc_phys_base - retrieve the physical base address of the CPC
*
@@ -43,8 +48,12 @@ static phys_addr_t mips_cpc_phys_base(void)
if (cpc_base & CM_GCR_CPC_BASE_CPCEN_MSK)
return cpc_base & CM_GCR_CPC_BASE_CPCBASE_MSK;
- /* Otherwise, give it the default address & enable it */
+ /* Otherwise, use the default address */
cpc_base = mips_cpc_default_phys_base();
+ if (!cpc_base)
+ return cpc_base;
+
+ /* Enable the CPC, mapped at the default address */
write_gcr_cpc_base(cpc_base | CM_GCR_CPC_BASE_CPCEN_MSK);
return cpc_base;
}
diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c
index 22dedd62818a..bd09853aecdf 100644
--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -899,7 +899,7 @@ static inline int mipsr2_find_op_func(struct pt_regs *regs, u32 inst,
* mipsr2_decoder: Decode and emulate a MIPS R2 instruction
* @regs: Process register set
* @inst: Instruction to decode and emulate
- * @fcr31: Floating Point Control and Status Register returned
+ * @fcr31: Floating Point Control and Status Register Cause bits returned
*/
int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
{
@@ -1172,13 +1172,13 @@ fpu_emul:
err = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 0,
&fault_addr);
- *fcr31 = current->thread.fpu.fcr31;
/*
- * We can't allow the emulated instruction to leave any of
- * the cause bits set in $fcr31.
+ * We can't allow the emulated instruction to leave any
+ * enabled Cause bits set in $fcr31.
*/
- current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+ *fcr31 = res = mask_fcr31_x(current->thread.fpu.fcr31);
+ current->thread.fpu.fcr31 &= ~res;
/*
* this is a tricky issue - lose_fpu() uses LL/SC atomics
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 6103b24d1bfc..a92994d60e91 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -79,16 +79,15 @@ void ptrace_disable(struct task_struct *child)
}
/*
- * Poke at FCSR according to its mask. Don't set the cause bits as
- * this is currently not handled correctly in FP context restoration
- * and will cause an oops if a corresponding enable bit is set.
+ * Poke at FCSR according to its mask. Set the Cause bits even
+ * if a corresponding Enable bit is set. This will be noticed at
+ * the time the thread is switched to and SIGFPE thrown accordingly.
*/
static void ptrace_setfcr31(struct task_struct *child, u32 value)
{
u32 fcr31;
u32 mask;
- value &= ~FPU_CSR_ALL_X;
fcr31 = child->thread.fpu.fcr31;
mask = boot_cpu_data.fpu_msk31;
child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask);
@@ -817,6 +816,7 @@ long arch_ptrace(struct task_struct *child, long request,
break;
#endif
case FPC_CSR:
+ init_fp_ctx(child);
ptrace_setfcr31(child, data);
break;
case DSP_BASE ... DSP_BASE + 5: {
diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S
index b4ac6374a38f..918f2f6d3861 100644
--- a/arch/mips/kernel/r2300_fpu.S
+++ b/arch/mips/kernel/r2300_fpu.S
@@ -21,106 +21,84 @@
#define EX(a,b) \
9: a,##b; \
.section __ex_table,"a"; \
+ PTR 9b,fault; \
+ .previous
+
+#define EX2(a,b) \
+9: a,##b; \
+ .section __ex_table,"a"; \
PTR 9b,bad_stack; \
+ PTR 9b+4,bad_stack; \
.previous
.set noreorder
.set mips1
- /* Save floating point context */
+
+/**
+ * _save_fp_context() - save FP context from the FPU
+ * @a0 - pointer to fpregs field of sigcontext
+ * @a1 - pointer to fpc_csr field of sigcontext
+ *
+ * Save FP context, including the 32 FP data registers and the FP
+ * control & status register, from the FPU to signal context.
+ */
LEAF(_save_fp_context)
.set push
SET_HARDFLOAT
li v0, 0 # assume success
- cfc1 t1,fcr31
- EX(swc1 $f0,(SC_FPREGS+0)(a0))
- EX(swc1 $f1,(SC_FPREGS+8)(a0))
- EX(swc1 $f2,(SC_FPREGS+16)(a0))
- EX(swc1 $f3,(SC_FPREGS+24)(a0))
- EX(swc1 $f4,(SC_FPREGS+32)(a0))
- EX(swc1 $f5,(SC_FPREGS+40)(a0))
- EX(swc1 $f6,(SC_FPREGS+48)(a0))
- EX(swc1 $f7,(SC_FPREGS+56)(a0))
- EX(swc1 $f8,(SC_FPREGS+64)(a0))
- EX(swc1 $f9,(SC_FPREGS+72)(a0))
- EX(swc1 $f10,(SC_FPREGS+80)(a0))
- EX(swc1 $f11,(SC_FPREGS+88)(a0))
- EX(swc1 $f12,(SC_FPREGS+96)(a0))
- EX(swc1 $f13,(SC_FPREGS+104)(a0))
- EX(swc1 $f14,(SC_FPREGS+112)(a0))
- EX(swc1 $f15,(SC_FPREGS+120)(a0))
- EX(swc1 $f16,(SC_FPREGS+128)(a0))
- EX(swc1 $f17,(SC_FPREGS+136)(a0))
- EX(swc1 $f18,(SC_FPREGS+144)(a0))
- EX(swc1 $f19,(SC_FPREGS+152)(a0))
- EX(swc1 $f20,(SC_FPREGS+160)(a0))
- EX(swc1 $f21,(SC_FPREGS+168)(a0))
- EX(swc1 $f22,(SC_FPREGS+176)(a0))
- EX(swc1 $f23,(SC_FPREGS+184)(a0))
- EX(swc1 $f24,(SC_FPREGS+192)(a0))
- EX(swc1 $f25,(SC_FPREGS+200)(a0))
- EX(swc1 $f26,(SC_FPREGS+208)(a0))
- EX(swc1 $f27,(SC_FPREGS+216)(a0))
- EX(swc1 $f28,(SC_FPREGS+224)(a0))
- EX(swc1 $f29,(SC_FPREGS+232)(a0))
- EX(swc1 $f30,(SC_FPREGS+240)(a0))
- EX(swc1 $f31,(SC_FPREGS+248)(a0))
- EX(sw t1,(SC_FPC_CSR)(a0))
- cfc1 t0,$0 # implementation/version
+ cfc1 t1, fcr31
+ EX2(s.d $f0, 0(a0))
+ EX2(s.d $f2, 16(a0))
+ EX2(s.d $f4, 32(a0))
+ EX2(s.d $f6, 48(a0))
+ EX2(s.d $f8, 64(a0))
+ EX2(s.d $f10, 80(a0))
+ EX2(s.d $f12, 96(a0))
+ EX2(s.d $f14, 112(a0))
+ EX2(s.d $f16, 128(a0))
+ EX2(s.d $f18, 144(a0))
+ EX2(s.d $f20, 160(a0))
+ EX2(s.d $f22, 176(a0))
+ EX2(s.d $f24, 192(a0))
+ EX2(s.d $f26, 208(a0))
+ EX2(s.d $f28, 224(a0))
+ EX2(s.d $f30, 240(a0))
jr ra
+ EX(sw t1, (a1))
.set pop
- .set nomacro
- EX(sw t0,(SC_FPC_EIR)(a0))
- .set macro
END(_save_fp_context)
-/*
- * Restore FPU state:
- * - fp gp registers
- * - cp1 status/control register
+/**
+ * _restore_fp_context() - restore FP context to the FPU
+ * @a0 - pointer to fpregs field of sigcontext
+ * @a1 - pointer to fpc_csr field of sigcontext
*
- * We base the decision which registers to restore from the signal stack
- * frame on the current content of c0_status, not on the content of the
- * stack frame which might have been changed by the user.
+ * Restore FP context, including the 32 FP data registers and the FP
+ * control & status register, from signal context to the FPU.
*/
LEAF(_restore_fp_context)
.set push
SET_HARDFLOAT
li v0, 0 # assume success
- EX(lw t0,(SC_FPC_CSR)(a0))
- EX(lwc1 $f0,(SC_FPREGS+0)(a0))
- EX(lwc1 $f1,(SC_FPREGS+8)(a0))
- EX(lwc1 $f2,(SC_FPREGS+16)(a0))
- EX(lwc1 $f3,(SC_FPREGS+24)(a0))
- EX(lwc1 $f4,(SC_FPREGS+32)(a0))
- EX(lwc1 $f5,(SC_FPREGS+40)(a0))
- EX(lwc1 $f6,(SC_FPREGS+48)(a0))
- EX(lwc1 $f7,(SC_FPREGS+56)(a0))
- EX(lwc1 $f8,(SC_FPREGS+64)(a0))
- EX(lwc1 $f9,(SC_FPREGS+72)(a0))
- EX(lwc1 $f10,(SC_FPREGS+80)(a0))
- EX(lwc1 $f11,(SC_FPREGS+88)(a0))
- EX(lwc1 $f12,(SC_FPREGS+96)(a0))
- EX(lwc1 $f13,(SC_FPREGS+104)(a0))
- EX(lwc1 $f14,(SC_FPREGS+112)(a0))
- EX(lwc1 $f15,(SC_FPREGS+120)(a0))
- EX(lwc1 $f16,(SC_FPREGS+128)(a0))
- EX(lwc1 $f17,(SC_FPREGS+136)(a0))
- EX(lwc1 $f18,(SC_FPREGS+144)(a0))
- EX(lwc1 $f19,(SC_FPREGS+152)(a0))
- EX(lwc1 $f20,(SC_FPREGS+160)(a0))
- EX(lwc1 $f21,(SC_FPREGS+168)(a0))
- EX(lwc1 $f22,(SC_FPREGS+176)(a0))
- EX(lwc1 $f23,(SC_FPREGS+184)(a0))
- EX(lwc1 $f24,(SC_FPREGS+192)(a0))
- EX(lwc1 $f25,(SC_FPREGS+200)(a0))
- EX(lwc1 $f26,(SC_FPREGS+208)(a0))
- EX(lwc1 $f27,(SC_FPREGS+216)(a0))
- EX(lwc1 $f28,(SC_FPREGS+224)(a0))
- EX(lwc1 $f29,(SC_FPREGS+232)(a0))
- EX(lwc1 $f30,(SC_FPREGS+240)(a0))
- EX(lwc1 $f31,(SC_FPREGS+248)(a0))
+ EX(lw t0, (a1))
+ EX2(l.d $f0, 0(a0))
+ EX2(l.d $f2, 16(a0))
+ EX2(l.d $f4, 32(a0))
+ EX2(l.d $f6, 48(a0))
+ EX2(l.d $f8, 64(a0))
+ EX2(l.d $f10, 80(a0))
+ EX2(l.d $f12, 96(a0))
+ EX2(l.d $f14, 112(a0))
+ EX2(l.d $f16, 128(a0))
+ EX2(l.d $f18, 144(a0))
+ EX2(l.d $f20, 160(a0))
+ EX2(l.d $f22, 176(a0))
+ EX2(l.d $f24, 192(a0))
+ EX2(l.d $f26, 208(a0))
+ EX2(l.d $f28, 224(a0))
+ EX2(l.d $f30, 240(a0))
jr ra
- ctc1 t0,fcr31
+ ctc1 t0, fcr31
.set pop
END(_restore_fp_context)
.set reorder
diff --git a/arch/mips/kernel/r6000_fpu.S b/arch/mips/kernel/r6000_fpu.S
index 47077380c15c..9cc7bfab3419 100644
--- a/arch/mips/kernel/r6000_fpu.S
+++ b/arch/mips/kernel/r6000_fpu.S
@@ -21,7 +21,14 @@
.set push
SET_HARDFLOAT
- /* Save floating point context */
+/**
+ * _save_fp_context() - save FP context from the FPU
+ * @a0 - pointer to fpregs field of sigcontext
+ * @a1 - pointer to fpc_csr field of sigcontext
+ *
+ * Save FP context, including the 32 FP data registers and the FP
+ * control & status register, from the FPU to signal context.
+ */
LEAF(_save_fp_context)
mfc0 t0,CP0_STATUS
sll t0,t0,2
@@ -30,59 +37,59 @@
cfc1 t1,fcr31
/* Store the 16 double precision registers */
- sdc1 $f0,(SC_FPREGS+0)(a0)
- sdc1 $f2,(SC_FPREGS+16)(a0)
- sdc1 $f4,(SC_FPREGS+32)(a0)
- sdc1 $f6,(SC_FPREGS+48)(a0)
- sdc1 $f8,(SC_FPREGS+64)(a0)
- sdc1 $f10,(SC_FPREGS+80)(a0)
- sdc1 $f12,(SC_FPREGS+96)(a0)
- sdc1 $f14,(SC_FPREGS+112)(a0)
- sdc1 $f16,(SC_FPREGS+128)(a0)
- sdc1 $f18,(SC_FPREGS+144)(a0)
- sdc1 $f20,(SC_FPREGS+160)(a0)
- sdc1 $f22,(SC_FPREGS+176)(a0)
- sdc1 $f24,(SC_FPREGS+192)(a0)
- sdc1 $f26,(SC_FPREGS+208)(a0)
- sdc1 $f28,(SC_FPREGS+224)(a0)
- sdc1 $f30,(SC_FPREGS+240)(a0)
+ sdc1 $f0,0(a0)
+ sdc1 $f2,16(a0)
+ sdc1 $f4,32(a0)
+ sdc1 $f6,48(a0)
+ sdc1 $f8,64(a0)
+ sdc1 $f10,80(a0)
+ sdc1 $f12,96(a0)
+ sdc1 $f14,112(a0)
+ sdc1 $f16,128(a0)
+ sdc1 $f18,144(a0)
+ sdc1 $f20,160(a0)
+ sdc1 $f22,176(a0)
+ sdc1 $f24,192(a0)
+ sdc1 $f26,208(a0)
+ sdc1 $f28,224(a0)
+ sdc1 $f30,240(a0)
jr ra
- sw t0,SC_FPC_CSR(a0)
+ sw t0,(a1)
1: jr ra
nop
END(_save_fp_context)
-/* Restore FPU state:
- * - fp gp registers
- * - cp1 status/control register
+/**
+ * _restore_fp_context() - restore FP context to the FPU
+ * @a0 - pointer to fpregs field of sigcontext
+ * @a1 - pointer to fpc_csr field of sigcontext
*
- * We base the decision which registers to restore from the signal stack
- * frame on the current content of c0_status, not on the content of the
- * stack frame which might have been changed by the user.
+ * Restore FP context, including the 32 FP data registers and the FP
+ * control & status register, from signal context to the FPU.
*/
LEAF(_restore_fp_context)
mfc0 t0,CP0_STATUS
sll t0,t0,2
bgez t0,1f
- lw t0,SC_FPC_CSR(a0)
+ lw t0,(a1)
/* Restore the 16 double precision registers */
- ldc1 $f0,(SC_FPREGS+0)(a0)
- ldc1 $f2,(SC_FPREGS+16)(a0)
- ldc1 $f4,(SC_FPREGS+32)(a0)
- ldc1 $f6,(SC_FPREGS+48)(a0)
- ldc1 $f8,(SC_FPREGS+64)(a0)
- ldc1 $f10,(SC_FPREGS+80)(a0)
- ldc1 $f12,(SC_FPREGS+96)(a0)
- ldc1 $f14,(SC_FPREGS+112)(a0)
- ldc1 $f16,(SC_FPREGS+128)(a0)
- ldc1 $f18,(SC_FPREGS+144)(a0)
- ldc1 $f20,(SC_FPREGS+160)(a0)
- ldc1 $f22,(SC_FPREGS+176)(a0)
- ldc1 $f24,(SC_FPREGS+192)(a0)
- ldc1 $f26,(SC_FPREGS+208)(a0)
- ldc1 $f28,(SC_FPREGS+224)(a0)
- ldc1 $f30,(SC_FPREGS+240)(a0)
+ ldc1 $f0,0(a0)
+ ldc1 $f2,16(a0)
+ ldc1 $f4,32(a0)
+ ldc1 $f6,48(a0)
+ ldc1 $f8,64(a0)
+ ldc1 $f10,80(a0)
+ ldc1 $f12,96(a0)
+ ldc1 $f14,112(a0)
+ ldc1 $f16,128(a0)
+ ldc1 $f18,144(a0)
+ ldc1 $f20,160(a0)
+ ldc1 $f22,176(a0)
+ ldc1 $f24,192(a0)
+ ldc1 $f26,208(a0)
+ ldc1 $f28,224(a0)
+ ldc1 $f30,240(a0)
jr ra
ctc1 t0,fcr31
1: jr ra
diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c
index ca1cc30c0891..1958910b75c0 100644
--- a/arch/mips/kernel/relocate.c
+++ b/arch/mips/kernel/relocate.c
@@ -200,7 +200,7 @@ static inline __init unsigned long get_random_boot(void)
#if defined(CONFIG_USE_OF)
/* Get any additional entropy passed in device tree */
- {
+ if (initial_boot_params) {
int node, len;
u64 *prop;
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 0d57909d9026..f66e5ce505b2 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -368,6 +368,19 @@ static void __init bootmem_init(void)
end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
+#ifndef CONFIG_HIGHMEM
+ /*
+ * Skip highmem here so we get an accurate max_low_pfn if low
+ * memory stops short of high memory.
+ * If the region overlaps HIGHMEM_START, end is clipped so
+ * max_pfn excludes the highmem portion.
+ */
+ if (start >= PFN_DOWN(HIGHMEM_START))
+ continue;
+ if (end > PFN_DOWN(HIGHMEM_START))
+ end = PFN_DOWN(HIGHMEM_START);
+#endif
+
if (end > max_low_pfn)
max_low_pfn = end;
if (start < min_low_pfn)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 1f5fdee1dfc3..3905003dfe2b 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -156,7 +156,7 @@ static void show_backtrace(struct task_struct *task, const struct pt_regs *regs)
print_ip_sym(pc);
pc = unwind_stack(task, &sp, pc, &ra);
} while (pc);
- printk("\n");
+ pr_cont("\n");
}
/*
@@ -174,22 +174,24 @@ static void show_stacktrace(struct task_struct *task,
printk("Stack :");
i = 0;
while ((unsigned long) sp & (PAGE_SIZE - 1)) {
- if (i && ((i % (64 / field)) == 0))
- printk("\n ");
+ if (i && ((i % (64 / field)) == 0)) {
+ pr_cont("\n");
+ printk(" ");
+ }
if (i > 39) {
- printk(" ...");
+ pr_cont(" ...");
break;
}
if (__get_user(stackdata, sp++)) {
- printk(" (Bad stack address)");
+ pr_cont(" (Bad stack address)");
break;
}
- printk(" %0*lx", field, stackdata);
+ pr_cont(" %0*lx", field, stackdata);
i++;
}
- printk("\n");
+ pr_cont("\n");
show_backtrace(task, regs);
}
@@ -229,18 +231,19 @@ static void show_code(unsigned int __user *pc)
long i;
unsigned short __user *pc16 = NULL;
- printk("\nCode:");
+ printk("Code:");
if ((unsigned long)pc & 1)
pc16 = (unsigned short __user *)((unsigned long)pc & ~1);
for(i = -3 ; i < 6 ; i++) {
unsigned int insn;
if (pc16 ? __get_user(insn, pc16 + i) : __get_user(insn, pc + i)) {
- printk(" (Bad address in epc)\n");
+ pr_cont(" (Bad address in epc)\n");
break;
}
- printk("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>'));
+ pr_cont("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>'));
}
+ pr_cont("\n");
}
static void __show_regs(const struct pt_regs *regs)
@@ -259,15 +262,15 @@ static void __show_regs(const struct pt_regs *regs)
if ((i % 4) == 0)
printk("$%2d :", i);
if (i == 0)
- printk(" %0*lx", field, 0UL);
+ pr_cont(" %0*lx", field, 0UL);
else if (i == 26 || i == 27)
- printk(" %*s", field, "");
+ pr_cont(" %*s", field, "");
else
- printk(" %0*lx", field, regs->regs[i]);
+ pr_cont(" %0*lx", field, regs->regs[i]);
i++;
if ((i % 4) == 0)
- printk("\n");
+ pr_cont("\n");
}
#ifdef CONFIG_CPU_HAS_SMARTMIPS
@@ -288,46 +291,46 @@ static void __show_regs(const struct pt_regs *regs)
if (cpu_has_3kex) {
if (regs->cp0_status & ST0_KUO)
- printk("KUo ");
+ pr_cont("KUo ");
if (regs->cp0_status & ST0_IEO)
- printk("IEo ");
+ pr_cont("IEo ");
if (regs->cp0_status & ST0_KUP)
- printk("KUp ");
+ pr_cont("KUp ");
if (regs->cp0_status & ST0_IEP)
- printk("IEp ");
+ pr_cont("IEp ");
if (regs->cp0_status & ST0_KUC)
- printk("KUc ");
+ pr_cont("KUc ");
if (regs->cp0_status & ST0_IEC)
- printk("IEc ");
+ pr_cont("IEc ");
} else if (cpu_has_4kex) {
if (regs->cp0_status & ST0_KX)
- printk("KX ");
+ pr_cont("KX ");
if (regs->cp0_status & ST0_SX)
- printk("SX ");
+ pr_cont("SX ");
if (regs->cp0_status & ST0_UX)
- printk("UX ");
+ pr_cont("UX ");
switch (regs->cp0_status & ST0_KSU) {
case KSU_USER:
- printk("USER ");
+ pr_cont("USER ");
break;
case KSU_SUPERVISOR:
- printk("SUPERVISOR ");
+ pr_cont("SUPERVISOR ");
break;
case KSU_KERNEL:
- printk("KERNEL ");
+ pr_cont("KERNEL ");
break;
default:
- printk("BAD_MODE ");
+ pr_cont("BAD_MODE ");
break;
}
if (regs->cp0_status & ST0_ERL)
- printk("ERL ");
+ pr_cont("ERL ");
if (regs->cp0_status & ST0_EXL)
- printk("EXL ");
+ pr_cont("EXL ");
if (regs->cp0_status & ST0_IE)
- printk("IE ");
+ pr_cont("IE ");
}
- printk("\n");
+ pr_cont("\n");
exccode = (cause & CAUSEF_EXCCODE) >> CAUSEB_EXCCODE;
printk("Cause : %08x (ExcCode %02x)\n", cause, exccode);
@@ -705,6 +708,32 @@ asmlinkage void do_ov(struct pt_regs *regs)
exception_exit(prev_state);
}
+/*
+ * Send SIGFPE according to FCSR Cause bits, which must have already
+ * been masked against Enable bits. This is impotant as Inexact can
+ * happen together with Overflow or Underflow, and `ptrace' can set
+ * any bits.
+ */
+void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
+ struct task_struct *tsk)
+{
+ struct siginfo si = { .si_addr = fault_addr, .si_signo = SIGFPE };
+
+ if (fcr31 & FPU_CSR_INV_X)
+ si.si_code = FPE_FLTINV;
+ else if (fcr31 & FPU_CSR_DIV_X)
+ si.si_code = FPE_FLTDIV;
+ else if (fcr31 & FPU_CSR_OVF_X)
+ si.si_code = FPE_FLTOVF;
+ else if (fcr31 & FPU_CSR_UDF_X)
+ si.si_code = FPE_FLTUND;
+ else if (fcr31 & FPU_CSR_INE_X)
+ si.si_code = FPE_FLTRES;
+ else
+ si.si_code = __SI_FAULT;
+ force_sig_info(SIGFPE, &si, tsk);
+}
+
int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
{
struct siginfo si = { 0 };
@@ -715,27 +744,7 @@ int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
return 0;
case SIGFPE:
- si.si_addr = fault_addr;
- si.si_signo = sig;
- /*
- * Inexact can happen together with Overflow or Underflow.
- * Respect the mask to deliver the correct exception.
- */
- fcr31 &= (fcr31 & FPU_CSR_ALL_E) <<
- (ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E));
- if (fcr31 & FPU_CSR_INV_X)
- si.si_code = FPE_FLTINV;
- else if (fcr31 & FPU_CSR_DIV_X)
- si.si_code = FPE_FLTDIV;
- else if (fcr31 & FPU_CSR_OVF_X)
- si.si_code = FPE_FLTOVF;
- else if (fcr31 & FPU_CSR_UDF_X)
- si.si_code = FPE_FLTUND;
- else if (fcr31 & FPU_CSR_INE_X)
- si.si_code = FPE_FLTRES;
- else
- si.si_code = __SI_FAULT;
- force_sig_info(sig, &si, current);
+ force_fcr31_sig(fcr31, fault_addr, current);
return 1;
case SIGBUS:
@@ -799,13 +808,13 @@ static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
/* Run the emulator */
sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
&fault_addr);
- fcr31 = current->thread.fpu.fcr31;
/*
- * We can't allow the emulated instruction to leave any of
- * the cause bits set in $fcr31.
+ * We can't allow the emulated instruction to leave any
+ * enabled Cause bits set in $fcr31.
*/
- current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+ fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
+ current->thread.fpu.fcr31 &= ~fcr31;
/* Restore the hardware register state */
own_fpu(1);
@@ -831,7 +840,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
goto out;
/* Clear FCSR.Cause before enabling interrupts */
- write_32bit_cp1_register(CP1_STATUS, fcr31 & ~FPU_CSR_ALL_X);
+ write_32bit_cp1_register(CP1_STATUS, fcr31 & ~mask_fcr31_x(fcr31));
local_irq_enable();
die_if_kernel("FP exception in kernel code", regs);
@@ -853,13 +862,13 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
/* Run the emulator */
sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
&fault_addr);
- fcr31 = current->thread.fpu.fcr31;
/*
- * We can't allow the emulated instruction to leave any of
- * the cause bits set in $fcr31.
+ * We can't allow the emulated instruction to leave any
+ * enabled Cause bits set in $fcr31.
*/
- current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+ fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
+ current->thread.fpu.fcr31 &= ~fcr31;
/* Restore the hardware register state */
own_fpu(1); /* Using the FPU again. */
@@ -1424,13 +1433,13 @@ asmlinkage void do_cpu(struct pt_regs *regs)
sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 0,
&fault_addr);
- fcr31 = current->thread.fpu.fcr31;
/*
* We can't allow the emulated instruction to leave
- * any of the cause bits set in $fcr31.
+ * any enabled Cause bits set in $fcr31.
*/
- current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+ fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
+ current->thread.fpu.fcr31 &= ~fcr31;
/* Send a signal if required. */
if (!process_fpemu_return(sig, fault_addr, fcr31) && !err)
diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c
index 0f80b936e75e..6eb50a7137db 100644
--- a/arch/mips/lib/dump_tlb.c
+++ b/arch/mips/lib/dump_tlb.c
@@ -135,42 +135,42 @@ static void dump_tlb(int first, int last)
c0 = (entrylo0 & ENTRYLO_C) >> ENTRYLO_C_SHIFT;
c1 = (entrylo1 & ENTRYLO_C) >> ENTRYLO_C_SHIFT;
- printk("va=%0*lx asid=%0*lx",
- vwidth, (entryhi & ~0x1fffUL),
- asidwidth, entryhi & asidmask);
+ pr_cont("va=%0*lx asid=%0*lx",
+ vwidth, (entryhi & ~0x1fffUL),
+ asidwidth, entryhi & asidmask);
if (cpu_has_guestid)
- printk(" gid=%02lx",
- (guestctl1 & MIPS_GCTL1_RID)
+ pr_cont(" gid=%02lx",
+ (guestctl1 & MIPS_GCTL1_RID)
>> MIPS_GCTL1_RID_SHIFT);
/* RI/XI are in awkward places, so mask them off separately */
pa = entrylo0 & ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI);
if (xpa)
pa |= (unsigned long long)readx_c0_entrylo0() << 30;
pa = (pa << 6) & PAGE_MASK;
- printk("\n\t[");
+ pr_cont("\n\t[");
if (cpu_has_rixi)
- printk("ri=%d xi=%d ",
- (entrylo0 & MIPS_ENTRYLO_RI) ? 1 : 0,
- (entrylo0 & MIPS_ENTRYLO_XI) ? 1 : 0);
- printk("pa=%0*llx c=%d d=%d v=%d g=%d] [",
- pwidth, pa, c0,
- (entrylo0 & ENTRYLO_D) ? 1 : 0,
- (entrylo0 & ENTRYLO_V) ? 1 : 0,
- (entrylo0 & ENTRYLO_G) ? 1 : 0);
+ pr_cont("ri=%d xi=%d ",
+ (entrylo0 & MIPS_ENTRYLO_RI) ? 1 : 0,
+ (entrylo0 & MIPS_ENTRYLO_XI) ? 1 : 0);
+ pr_cont("pa=%0*llx c=%d d=%d v=%d g=%d] [",
+ pwidth, pa, c0,
+ (entrylo0 & ENTRYLO_D) ? 1 : 0,
+ (entrylo0 & ENTRYLO_V) ? 1 : 0,
+ (entrylo0 & ENTRYLO_G) ? 1 : 0);
/* RI/XI are in awkward places, so mask them off separately */
pa = entrylo1 & ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI);
if (xpa)
pa |= (unsigned long long)readx_c0_entrylo1() << 30;
pa = (pa << 6) & PAGE_MASK;
if (cpu_has_rixi)
- printk("ri=%d xi=%d ",
- (entrylo1 & MIPS_ENTRYLO_RI) ? 1 : 0,
- (entrylo1 & MIPS_ENTRYLO_XI) ? 1 : 0);
- printk("pa=%0*llx c=%d d=%d v=%d g=%d]\n",
- pwidth, pa, c1,
- (entrylo1 & ENTRYLO_D) ? 1 : 0,
- (entrylo1 & ENTRYLO_V) ? 1 : 0,
- (entrylo1 & ENTRYLO_G) ? 1 : 0);
+ pr_cont("ri=%d xi=%d ",
+ (entrylo1 & MIPS_ENTRYLO_RI) ? 1 : 0,
+ (entrylo1 & MIPS_ENTRYLO_XI) ? 1 : 0);
+ pr_cont("pa=%0*llx c=%d d=%d v=%d g=%d]\n",
+ pwidth, pa, c1,
+ (entrylo1 & ENTRYLO_D) ? 1 : 0,
+ (entrylo1 & ENTRYLO_V) ? 1 : 0,
+ (entrylo1 & ENTRYLO_G) ? 1 : 0);
}
printk("\n");
diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c
index 744f4a7bc49d..85b4086e553e 100644
--- a/arch/mips/lib/r3k_dump_tlb.c
+++ b/arch/mips/lib/r3k_dump_tlb.c
@@ -53,15 +53,15 @@ static void dump_tlb(int first, int last)
*/
printk("Index: %2d ", i);
- printk("va=%08lx asid=%08lx"
- " [pa=%06lx n=%d d=%d v=%d g=%d]",
- entryhi & PAGE_MASK,
- entryhi & asid_mask,
- entrylo0 & PAGE_MASK,
- (entrylo0 & R3K_ENTRYLO_N) ? 1 : 0,
- (entrylo0 & R3K_ENTRYLO_D) ? 1 : 0,
- (entrylo0 & R3K_ENTRYLO_V) ? 1 : 0,
- (entrylo0 & R3K_ENTRYLO_G) ? 1 : 0);
+ pr_cont("va=%08lx asid=%08lx"
+ " [pa=%06lx n=%d d=%d v=%d g=%d]",
+ entryhi & PAGE_MASK,
+ entryhi & asid_mask,
+ entrylo0 & PAGE_MASK,
+ (entrylo0 & R3K_ENTRYLO_N) ? 1 : 0,
+ (entrylo0 & R3K_ENTRYLO_D) ? 1 : 0,
+ (entrylo0 & R3K_ENTRYLO_V) ? 1 : 0,
+ (entrylo0 & R3K_ENTRYLO_G) ? 1 : 0);
}
}
printk("\n");
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 13:41:12 +0300