diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arc/Kconfig | 22 | ||||
| -rw-r--r-- | arch/arc/include/asm/mmu.h | 22 | ||||
| -rw-r--r-- | arch/arc/include/asm/pgtable.h | 26 | ||||
| -rw-r--r-- | arch/arc/include/asm/tlb-mmu1.h | 101 | ||||
| -rw-r--r-- | arch/arc/mm/cache.c | 110 | ||||
| -rw-r--r-- | arch/arc/mm/tlb.c | 163 | ||||
| -rw-r--r-- | arch/arc/mm/tlbex.S | 10 |
7 files changed, 42 insertions, 412 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index fb3c319084c7..53d143fc42fe 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -265,32 +265,17 @@ config ARC_DCCM_BASE choice prompt "MMU Version" - default ARC_MMU_V3 if ARC_CPU_770 - default ARC_MMU_V4 if ARC_CPU_HS - -if ISA_ARCOMPACT - -config ARC_MMU_V1 - bool "MMU v1" - help - Orig ARC700 MMU - -config ARC_MMU_V2 - bool "MMU v2" - help - Fixed the deficiency of v1 - possible thrashing in memcpy scenario - when 2 D-TLB and 1 I-TLB entries index into same 2way set. + default ARC_MMU_V3 if ISA_ARCOMPACT + default ARC_MMU_V4 if ISA_ARCV2 config ARC_MMU_V3 bool "MMU v3" - depends on ARC_CPU_770 + depends on ISA_ARCOMPACT help Introduced with ARC700 4.10: New Features Variable Page size (1k-16k), var JTLB size 128 x (2 or 4) Shared Address Spaces (SASID) -endif - config ARC_MMU_V4 bool "MMU v4" depends on ISA_ARCV2 @@ -309,7 +294,6 @@ config ARC_PAGE_SIZE_8K config ARC_PAGE_SIZE_16K bool "16KB" - depends on ARC_MMU_V3 || ARC_MMU_V4 config ARC_PAGE_SIZE_4K bool "4KB" diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h index 26b731d32a2b..a81d1975866a 100644 --- a/arch/arc/include/asm/mmu.h +++ b/arch/arc/include/asm/mmu.h @@ -10,19 +10,10 @@ #include <linux/threads.h> /* NR_CPUS */ #endif -#if defined(CONFIG_ARC_MMU_V1) -#define CONFIG_ARC_MMU_VER 1 -#elif defined(CONFIG_ARC_MMU_V2) -#define CONFIG_ARC_MMU_VER 2 -#elif defined(CONFIG_ARC_MMU_V3) -#define CONFIG_ARC_MMU_VER 3 -#elif defined(CONFIG_ARC_MMU_V4) -#define CONFIG_ARC_MMU_VER 4 -#endif - /* MMU Management regs */ #define ARC_REG_MMU_BCR 0x06f -#if (CONFIG_ARC_MMU_VER < 4) + +#ifdef CONFIG_ARC_MMU_V3 #define ARC_REG_TLBPD0 0x405 #define ARC_REG_TLBPD1 0x406 #define ARC_REG_TLBPD1HI 0 /* Dummy: allows code sharing with ARC700 */ @@ -52,7 +43,7 @@ /* Error code if probe fails */ #define TLB_LKUP_ERR 0x80000000 -#if (CONFIG_ARC_MMU_VER < 4) +#ifdef CONFIG_ARC_MMU_V3 #define TLB_DUP_ERR (TLB_LKUP_ERR | 0x00000001) #else #define TLB_DUP_ERR (TLB_LKUP_ERR | 0x40000000) @@ -63,15 +54,10 @@ #define TLBRead 0x2 #define TLBGetIndex 0x3 #define TLBProbe 0x4 - -#if (CONFIG_ARC_MMU_VER >= 2) #define TLBWriteNI 0x5 /* write JTLB without inv uTLBs */ #define TLBIVUTLB 0x6 /* explicitly inv uTLBs */ -#else -#define TLBWriteNI TLBWrite /* Not present in hardware, fallback */ -#endif -#if (CONFIG_ARC_MMU_VER >= 4) +#ifdef CONFIG_ARC_MMU_V4 #define TLBInsertEntry 0x7 #define TLBDeleteEntry 0x8 #endif diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 320cc0ae8a08..0c3e220bd2b4 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -35,7 +35,7 @@ #include <linux/bits.h> #include <asm-generic/pgtable-nopmd.h> #include <asm/page.h> -#include <asm/mmu.h> /* to propagate CONFIG_ARC_MMU_VER <n> */ +#include <asm/mmu.h> /************************************************************************** * Page Table Flags @@ -51,20 +51,6 @@ * (saves some bit shift ops in TLB Miss hdlrs) */ -#if (CONFIG_ARC_MMU_VER <= 2) - -#define _PAGE_ACCESSED (1<<1) /* Page is accessed (S) */ -#define _PAGE_CACHEABLE (1<<2) /* Page is cached (H) */ -#define _PAGE_EXECUTE (1<<3) /* Page has user execute perm (H) */ -#define _PAGE_WRITE (1<<4) /* Page has user write perm (H) */ -#define _PAGE_READ (1<<5) /* Page has user read perm (H) */ -#define _PAGE_DIRTY (1<<6) /* Page modified (dirty) (S) */ -#define _PAGE_SPECIAL (1<<7) -#define _PAGE_GLOBAL (1<<8) /* Page is global (H) */ -#define _PAGE_PRESENT (1<<10) /* TLB entry is valid (H) */ - -#else /* MMU v3 onwards */ - #define _PAGE_CACHEABLE (1<<0) /* Page is cached (H) */ #define _PAGE_EXECUTE (1<<1) /* Page has user execute perm (H) */ #define _PAGE_WRITE (1<<2) /* Page has user write perm (H) */ @@ -73,23 +59,15 @@ #define _PAGE_DIRTY (1<<5) /* Page modified (dirty) (S) */ #define _PAGE_SPECIAL (1<<6) -#if (CONFIG_ARC_MMU_VER >= 4) -#define _PAGE_WTHRU (1<<7) /* Page cache mode write-thru (H) */ -#endif - #define _PAGE_GLOBAL (1<<8) /* Page is global (H) */ #define _PAGE_PRESENT (1<<9) /* TLB entry is valid (H) */ -#if (CONFIG_ARC_MMU_VER >= 4) +#ifdef CONFIG_ARC_MMU_V4 #define _PAGE_HW_SZ (1<<10) /* Page Size indicator (H): 0 normal, 1 super */ #endif #define _PAGE_SHARED_CODE (1<<11) /* Shared Code page with cmn vaddr usable for shared TLB entries (H) */ - -#define _PAGE_UNUSED_BIT (1<<12) -#endif - /* vmalloc permissions */ #define _K_PAGE_PERMS (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \ _PAGE_GLOBAL | _PAGE_PRESENT) diff --git a/arch/arc/include/asm/tlb-mmu1.h b/arch/arc/include/asm/tlb-mmu1.h deleted file mode 100644 index a3083b36f5f4..000000000000 --- a/arch/arc/include/asm/tlb-mmu1.h +++ /dev/null @@ -1,101 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) - */ - -#ifndef __ASM_TLB_MMU_V1_H__ -#define __ASM_TLB_MMU_V1_H__ - -#include <asm/mmu.h> - -#if defined(__ASSEMBLY__) && (CONFIG_ARC_MMU_VER == 1) - -.macro TLB_WRITE_HEURISTICS - -#define JH_HACK1 -#undef JH_HACK2 -#undef JH_HACK3 - -#ifdef JH_HACK3 -; Calculate set index for 2-way MMU -; -avoiding use of GetIndex from MMU -; and its unpleasant LFSR pseudo-random sequence -; -; r1 = TLBPD0 from TLB_RELOAD above -; -; -- jh_ex_way_set not cleared on startup -; didn't want to change setup.c -; hence extra instruction to clean -; -; -- should be in cache since in same line -; as r0/r1 saves above -; -ld r0,[jh_ex_way_sel] ; victim pointer -and r0,r0,1 ; clean -xor.f r0,r0,1 ; flip -st r0,[jh_ex_way_sel] ; store back -asr r0,r1,12 ; get set # <<1, note bit 12=R=0 -or.nz r0,r0,1 ; set way bit -and r0,r0,0xff ; clean -sr r0,[ARC_REG_TLBINDEX] -#endif - -#ifdef JH_HACK2 -; JH hack #2 -; Faster than hack #1 in non-thrash case, but hard-coded for 2-way MMU -; Slower in thrash case (where it matters) because more code is executed -; Inefficient due to two-register paradigm of this miss handler -; -/* r1 = data TLBPD0 at this point */ -lr r0,[eret] /* instruction address */ -xor r0,r0,r1 /* compare set # */ -and.f r0,r0,0x000fe000 /* 2-way MMU mask */ -bne 88f /* not in same set - no need to probe */ - -lr r0,[eret] /* instruction address */ -and r0,r0,PAGE_MASK /* VPN of instruction address */ -; lr r1,[ARC_REG_TLBPD0] /* Data VPN+ASID - already in r1 from TLB_RELOAD*/ -and r1,r1,0xff /* Data ASID */ -or r0,r0,r1 /* Instruction address + Data ASID */ - -lr r1,[ARC_REG_TLBPD0] /* save TLBPD0 containing data TLB*/ -sr r0,[ARC_REG_TLBPD0] /* write instruction address to TLBPD0 */ -sr TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */ -lr r0,[ARC_REG_TLBINDEX] /* r0 = index where instruction is, if at all */ -sr r1,[ARC_REG_TLBPD0] /* restore TLBPD0 */ - -xor r0,r0,1 /* flip bottom bit of data index */ -b.d 89f -sr r0,[ARC_REG_TLBINDEX] /* and put it back */ -88: -sr TLBGetIndex, [ARC_REG_TLBCOMMAND] -89: -#endif - -#ifdef JH_HACK1 -; -; Always checks whether instruction will be kicked out by dtlb miss -; -mov_s r3, r1 ; save PD0 prepared by TLB_RELOAD in r3 -lr r0,[eret] /* instruction address */ -and r0,r0,PAGE_MASK /* VPN of instruction address */ -bmsk r1,r3,7 /* Data ASID, bits 7-0 */ -or_s r0,r0,r1 /* Instruction address + Data ASID */ - -sr r0,[ARC_REG_TLBPD0] /* write instruction address to TLBPD0 */ -sr TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */ -lr r0,[ARC_REG_TLBINDEX] /* r0 = index where instruction is, if at all */ -sr r3,[ARC_REG_TLBPD0] /* restore TLBPD0 */ - -sr TLBGetIndex, [ARC_REG_TLBCOMMAND] -lr r1,[ARC_REG_TLBINDEX] /* r1 = index where MMU wants to put data */ -cmp r0,r1 /* if no match on indices, go around */ -xor.eq r1,r1,1 /* flip bottom bit of data index */ -sr r1,[ARC_REG_TLBINDEX] /* and put it back */ -#endif - -.endm - -#endif - -#endif diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 102418ac5ff4..8aa1231865d1 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -205,93 +205,24 @@ slc_chk: #define OP_INV_IC 0x4 /* - * I-Cache Aliasing in ARC700 VIPT caches (MMU v1-v3) + * Cache Flush programming model * - * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag. - * The orig Cache Management Module "CDU" only required paddr to invalidate a - * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry. - * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching - * the exact same line. + * ARC700 MMUv3 I$ and D$ are both VIPT and can potentially alias. + * Programming model requires both paddr and vaddr irrespecive of aliasing + * considerations: + * - vaddr in {I,D}C_IV?L + * - paddr in {I,D}C_PTAG * - * However for larger Caches (way-size > page-size) - i.e. in Aliasing config, - * paddr alone could not be used to correctly index the cache. + * In HS38x (MMUv4), D$ is PIPT, I$ is VIPT and can still alias. + * Programming model is different for aliasing vs. non-aliasing I$ + * - D$ / Non-aliasing I$: only paddr in {I,D}C_IV?L + * - Aliasing I$: same as ARC700 above (so MMUv3 routine used for MMUv4 I$) * - * ------------------ - * MMU v1/v2 (Fixed Page Size 8k) - * ------------------ - * The solution was to provide CDU with these additonal vaddr bits. These - * would be bits [x:13], x would depend on cache-geometry, 13 comes from - * standard page size of 8k. - * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits - * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the - * orig 5 bits of paddr were anyways ignored by CDU line ops, as they - * represent the offset within cache-line. The adv of using this "clumsy" - * interface for additional info was no new reg was needed in CDU programming - * model. - * - * 17:13 represented the max num of bits passable, actual bits needed were - * fewer, based on the num-of-aliases possible. - * -for 2 alias possibility, only bit 13 needed (32K cache) - * -for 4 alias possibility, bits 14:13 needed (64K cache) - * - * ------------------ - * MMU v3 - * ------------------ - * This ver of MMU supports variable page sizes (1k-16k): although Linux will - * only support 8k (default), 16k and 4k. - * However from hardware perspective, smaller page sizes aggravate aliasing - * meaning more vaddr bits needed to disambiguate the cache-line-op ; - * the existing scheme of piggybacking won't work for certain configurations. - * Two new registers IC_PTAG and DC_PTAG inttoduced. - * "tag" bits are provided in PTAG, index bits in existing IVIL/IVDL/FLDL regs + * - If PAE40 is enabled, independent of aliasing considerations, the higher + * bits needs to be written into PTAG_HI */ static inline -void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr, - unsigned long sz, const int op, const int full_page) -{ - unsigned int aux_cmd; - int num_lines; - - if (op == OP_INV_IC) { - aux_cmd = ARC_REG_IC_IVIL; - } else { - /* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */ - aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL; - } - - /* Ensure we properly floor/ceil the non-line aligned/sized requests - * and have @paddr - aligned to cache line and integral @num_lines. - * This however can be avoided for page sized since: - * -@paddr will be cache-line aligned already (being page aligned) - * -@sz will be integral multiple of line size (being page sized). - */ - if (!full_page) { - sz += paddr & ~CACHE_LINE_MASK; - paddr &= CACHE_LINE_MASK; - vaddr &= CACHE_LINE_MASK; - } - - num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES); - - /* MMUv2 and before: paddr contains stuffed vaddrs bits */ - paddr |= (vaddr >> PAGE_SHIFT) & 0x1F; - - while (num_lines-- > 0) { - write_aux_reg(aux_cmd, paddr); - paddr += L1_CACHE_BYTES; - } -} - -/* - * For ARC700 MMUv3 I-cache and D-cache flushes - * - ARC700 programming model requires paddr and vaddr be passed in seperate - * AUX registers (*_IV*L and *_PTAG respectively) irrespective of whether the - * caches actually alias or not. - * - For HS38, only the aliasing I-cache configuration uses the PTAG reg - * (non aliasing I-cache version doesn't; while D-cache can't possibly alias) - */ -static inline void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, unsigned long sz, const int op, const int full_page) { @@ -350,17 +281,6 @@ void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, #ifndef USE_RGN_FLSH /* - * In HS38x (MMU v4), I-cache is VIPT (can alias), D-cache is PIPT - * Here's how cache ops are implemented - * - * - D-cache: only paddr needed (in DC_IVDL/DC_FLDL) - * - I-cache Non Aliasing: Despite VIPT, only paddr needed (in IC_IVIL) - * - I-cache Aliasing: Both vaddr and paddr needed (in IC_IVIL, IC_PTAG - * respectively, similar to MMU v3 programming model, hence - * __cache_line_loop_v3() is used) - * - * If PAE40 is enabled, independent of aliasing considerations, the higher bits - * needs to be written into PTAG_HI */ static inline void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr, @@ -460,11 +380,9 @@ void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr, #endif -#if (CONFIG_ARC_MMU_VER < 3) -#define __cache_line_loop __cache_line_loop_v2 -#elif (CONFIG_ARC_MMU_VER == 3) +#ifdef CONFIG_ARC_MMU_V3 #define __cache_line_loop __cache_line_loop_v3 -#elif (CONFIG_ARC_MMU_VER > 3) +#else #define __cache_line_loop __cache_line_loop_v4 #endif diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 9c7c68247289..8696829d37c0 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -1,51 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * TLB Management (flush/create/diagnostics) for ARC700 + * TLB Management (flush/create/diagnostics) for MMUv3 and MMUv4 * * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) * - * vineetg: Aug 2011 - * -Reintroduce duplicate PD fixup - some customer chips still have the issue - * - * vineetg: May 2011 - * -No need to flush_cache_page( ) for each call to update_mmu_cache() - * some of the LMBench tests improved amazingly - * = page-fault thrice as fast (75 usec to 28 usec) - * = mmap twice as fast (9.6 msec to 4.6 msec), - * = fork (5.3 msec to 3.7 msec) - * - * vineetg: April 2011 : - * -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore, - * helps avoid a shift when preparing PD0 from PTE - * - * vineetg: April 2011 : Preparing for MMU V3 - * -MMU v2/v3 BCRs decoded differently - * -Remove TLB_SIZE hardcoding as it's variable now: 256 or 512 - * -tlb_entry_erase( ) can be void - * -local_flush_tlb_range( ): - * = need not "ceil" @end - * = walks MMU only if range spans < 32 entries, as opposed to 256 - * - * Vineetg: Sept 10th 2008 - * -Changes related to MMU v2 (Rel 4.8) - * - * Vineetg: Aug 29th 2008 - * -In TLB Flush operations (Metal Fix MMU) there is a explicit command to - * flush Micro-TLBS. If TLB Index Reg is invalid prior to TLBIVUTLB cmd, - * it fails. Thus need to load it with ANY valid value before invoking - * TLBIVUTLB cmd - * - * Vineetg: Aug 21th 2008: - * -Reduced the duration of IRQ lockouts in TLB Flush routines - * -Multiple copies of TLB erase code separated into a "single" function - * -In TLB Flush routines, interrupt disabling moved UP to retrieve ASID - * in interrupt-safe region. - * - * Vineetg: April 23rd Bug #93131 - * Problem: tlb_flush_kernel_range() doesn't do anything if the range to - * flush is more than the size of TLB itself. - * - * Rahul Trivedi : Codito Technologies 2004 */ #include <linux/module.h> @@ -57,47 +15,6 @@ #include <asm/mmu_context.h> #include <asm/mmu.h> -/* Need for ARC MMU v2 - * - * ARC700 MMU-v1 had a Joint-TLB for Code and Data and is 2 way set-assoc. - * For a memcpy operation with 3 players (src/dst/code) such that all 3 pages - * map into same set, there would be contention for the 2 ways causing severe - * Thrashing. - * - * Although J-TLB is 2 way set assoc, ARC700 caches J-TLB into uTLBS which has - * much higher associativity. u-D-TLB is 8 ways, u-I-TLB is 4 ways. - * Given this, the thrashing problem should never happen because once the 3 - * J-TLB entries are created (even though 3rd will knock out one of the prev - * two), the u-D-TLB and u-I-TLB will have what is required to accomplish memcpy - * - * Yet we still see the Thrashing because a J-TLB Write cause flush of u-TLBs. - * This is a simple design for keeping them in sync. So what do we do? - * The solution which James came up was pretty neat. It utilised the assoc - * of uTLBs by not invalidating always but only when absolutely necessary. - * - * - Existing TLB commands work as before - * - New command (TLBWriteNI) for TLB write without clearing uTLBs - * - New command (TLBIVUTLB) to invalidate uTLBs. - * - * The uTLBs need only be invalidated when pages are being removed from the - * OS page table. If a 'victim' TLB entry is being overwritten in the main TLB - * as a result of a miss, the removed entry is still allowed to exist in the - * uTLBs as it is still valid and present in the OS page table. This allows the - * full associativity of the uTLBs to hide the limited associativity of the main - * TLB. - * - * During a miss handler, the new "TLBWriteNI" command is used to load - * entries without clearing the uTLBs. - * - * When the OS page table is updated, TLB entries that may be associated with a - * removed page are removed (flushed) from the TLB using TLBWrite. In this - * circumstance, the uTLBs must also be cleared. This is done by using the - * existing TLBWrite command. An explicit IVUTLB is also required for those - * corner cases when TLBWrite was not executed at all because the corresp - * J-TLB entry got evicted/replaced. - */ - - /* A copy of the ASID from the PID reg is kept in asid_cache */ DEFINE_PER_CPU(unsigned int, asid_cache) = MM_CTXT_FIRST_CYCLE; @@ -120,32 +37,10 @@ static inline void __tlb_entry_erase(void) static void utlb_invalidate(void) { -#if (CONFIG_ARC_MMU_VER >= 2) - -#if (CONFIG_ARC_MMU_VER == 2) - /* MMU v2 introduced the uTLB Flush command. - * There was however an obscure hardware bug, where uTLB flush would - * fail when a prior probe for J-TLB (both totally unrelated) would - * return lkup err - because the entry didn't exist in MMU. - * The Workaround was to set Index reg with some valid value, prior to - * flush. This was fixed in MMU v3 - */ - unsigned int idx; - - /* make sure INDEX Reg is valid */ - idx = read_aux_reg(ARC_REG_TLBINDEX); - - /* If not write some dummy val */ - if (unlikely(idx & TLB_LKUP_ERR)) - write_aux_reg(ARC_REG_TLBINDEX, 0xa); -#endif - write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB); -#endif - } -#if (CONFIG_ARC_MMU_VER < 4) +#ifdef CONFIG_ARC_MMU_V3 static inline unsigned int tlb_entry_lkup(unsigned long vaddr_n_asid) { @@ -206,7 +101,7 @@ static void tlb_entry_insert(unsigned int pd0, pte_t pd1) write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); } -#else /* CONFIG_ARC_MMU_VER >= 4) */ +#else /* MMUv4 */ static void tlb_entry_erase(unsigned int vaddr_n_asid) { @@ -706,14 +601,6 @@ void read_decode_mmu_bcr(void) { struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu; unsigned int tmp; - struct bcr_mmu_1_2 { -#ifdef CONFIG_CPU_BIG_ENDIAN - unsigned int ver:8, ways:4, sets:4, u_itlb:8, u_dtlb:8; -#else - unsigned int u_dtlb:8, u_itlb:8, sets:4, ways:4, ver:8; -#endif - } *mmu2; - struct bcr_mmu_3 { #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4, @@ -738,23 +625,14 @@ void read_decode_mmu_bcr(void) tmp = read_aux_reg(ARC_REG_MMU_BCR); mmu->ver = (tmp >> 24); - if (is_isa_arcompact()) { - if (mmu->ver <= 2) { - mmu2 = (struct bcr_mmu_1_2 *)&tmp; - mmu->pg_sz_k = TO_KB(0x2000); - mmu->sets = 1 << mmu2->sets; - mmu->ways = 1 << mmu2->ways; - mmu->u_dtlb = mmu2->u_dtlb; - mmu->u_itlb = mmu2->u_itlb; - } else { - mmu3 = (struct bcr_mmu_3 *)&tmp; - mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1); - mmu->sets = 1 << mmu3->sets; - mmu->ways = 1 << mmu3->ways; - mmu->u_dtlb = mmu3->u_dtlb; - mmu->u_itlb = mmu3->u_itlb; - mmu->sasid = mmu3->sasid; - } + if (is_isa_arcompact() && mmu->ver == 3) { + mmu3 = (struct bcr_mmu_3 *)&tmp; + mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1); + mmu->sets = 1 << mmu3->sets; + mmu->ways = 1 << mmu3->ways; + mmu->u_dtlb = mmu3->u_dtlb; + mmu->u_itlb = mmu3->u_itlb; + mmu->sasid = mmu3->sasid; } else { mmu4 = (struct bcr_mmu_4 *)&tmp; mmu->pg_sz_k = 1 << (mmu4->sz0 - 1); @@ -815,22 +693,17 @@ void arc_mmu_init(void) /* * Ensure that MMU features assumed by kernel exist in hardware. - * For older ARC700 cpus, it has to be exact match, since the MMU - * revisions were not backwards compatible (MMUv3 TLB layout changed - * so even if kernel for v2 didn't use any new cmds of v3, it would - * still not work. - * For HS cpus, MMUv4 was baseline and v5 is backwards compatible - * (will run older software). + * - For older ARC700 cpus, only v3 supported + * - For HS cpus, v4 was baseline and v5 is backwards compatible + * (will run older software). */ - if (is_isa_arcompact() && mmu->ver == CONFIG_ARC_MMU_VER) + if (is_isa_arcompact() && mmu->ver == 3) compat = 1; - else if (is_isa_arcv2() && mmu->ver >= CONFIG_ARC_MMU_VER) + else if (is_isa_arcv2() && mmu->ver >= 4) compat = 1; - if (!compat) { - panic("MMU ver %d doesn't match kernel built for %d...\n", - mmu->ver, CONFIG_ARC_MMU_VER); - } + if (!compat) + panic("MMU ver %d doesn't match kernel built for\n", mmu->ver); if (mmu->pg_sz_k != TO_KB(PAGE_SIZE)) panic("MMU pg size != PAGE_SIZE (%luk)\n", TO_KB(PAGE_SIZE)); diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index 062fae46c3f8..96c3a5de9dd4 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -39,7 +39,6 @@ #include <asm/arcregs.h> #include <asm/cache.h> #include <asm/processor.h> -#include <asm/tlb-mmu1.h> #ifdef CONFIG_ISA_ARCOMPACT ;----------------------------------------------------------------- @@ -279,7 +278,7 @@ ex_saved_reg1: ; Commit the TLB entry into MMU .macro COMMIT_ENTRY_TO_MMU -#if (CONFIG_ARC_MMU_VER < 4) +#ifdef CONFIG_ARC_MMU_V3 /* Get free TLB slot: Set = computed from vaddr, way = random */ sr TLBGetIndex, [ARC_REG_TLBCOMMAND] @@ -375,13 +374,6 @@ ENTRY(EV_TLBMissD) CONV_PTE_TO_TLB -#if (CONFIG_ARC_MMU_VER == 1) - ; MMU with 2 way set assoc J-TLB, needs some help in pathetic case of - ; memcpy where 3 parties contend for 2 ways, ensuing a livelock. - ; But only for old MMU or one with Metal Fix - TLB_WRITE_HEURISTICS -#endif - COMMIT_ENTRY_TO_MMU TLBMISS_RESTORE_REGS EV_TLBMissD_fast_ret: ; additional label for VDK OS-kit instrumentation |