diff options
Diffstat (limited to 'arch/sh/boards/mach-ecovec24/setup.c')
| -rw-r--r-- | arch/sh/boards/mach-ecovec24/setup.c | 113 |
1 files changed, 100 insertions, 13 deletions
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 6c13b92742e8..49714258732e 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/mfd/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> #include <linux/gpio.h> #include <linux/interrupt.h> @@ -442,7 +443,9 @@ static void sdhi0_set_pwr(struct platform_device *pdev, int state) } static struct sh_mobile_sdhi_info sdhi0_info = { - .set_pwr = sdhi0_set_pwr, + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .set_pwr = sdhi0_set_pwr, }; static struct resource sdhi0_resources[] = { @@ -478,7 +481,9 @@ static void sdhi1_set_pwr(struct platform_device *pdev, int state) } static struct sh_mobile_sdhi_info sdhi1_info = { - .set_pwr = sdhi1_set_pwr, + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, + .set_pwr = sdhi1_set_pwr, }; static struct resource sdhi1_resources[] = { @@ -710,8 +715,6 @@ static struct clk_ops fsimck_clk_ops = { }; static struct clk fsimckb_clk = { - .name = "fsimckb_clk", - .id = -1, .ops = &fsimck_clk_ops, .enable_reg = (void __iomem *)FCLKBCR, .rate = 0, /* unknown */ @@ -771,6 +774,51 @@ static struct platform_device irda_device = { .resource = irda_resources, }; +#include <media/ak881x.h> +#include <media/sh_vou.h> + +struct ak881x_pdata ak881x_pdata = { + .flags = AK881X_IF_MODE_SLAVE, +}; + +static struct i2c_board_info ak8813 = { + I2C_BOARD_INFO("ak8813", 0x20), + .platform_data = &ak881x_pdata, +}; + +struct sh_vou_pdata sh_vou_pdata = { + .bus_fmt = SH_VOU_BUS_8BIT, + .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW, + .board_info = &ak8813, + .i2c_adap = 0, + .module_name = "ak881x", +}; + +static struct resource sh_vou_resources[] = { + [0] = { + .start = 0xfe960000, + .end = 0xfe962043, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 55, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device vou_device = { + .name = "sh-vou", + .id = -1, + .num_resources = ARRAY_SIZE(sh_vou_resources), + .resource = sh_vou_resources, + .dev = { + .platform_data = &sh_vou_pdata, + }, + .archdata = { + .hwblk_id = HWBLK_VOU, + }, +}; + static struct platform_device *ecovec_devices[] __initdata = { &heartbeat_device, &nor_flash_device, @@ -792,6 +840,7 @@ static struct platform_device *ecovec_devices[] __initdata = { &camera_devices[2], &fsi_device, &irda_device, + &vou_device, }; #ifdef CONFIG_I2C @@ -1138,16 +1187,20 @@ static int __init arch_setup(void) /* set SPU2 clock to 83.4 MHz */ clk = clk_get(NULL, "spu_clk"); - clk_set_rate(clk, clk_round_rate(clk, 83333333)); - clk_put(clk); + if (clk) { + clk_set_rate(clk, clk_round_rate(clk, 83333333)); + clk_put(clk); + } /* change parent of FSI B */ clk = clk_get(NULL, "fsib_clk"); - clk_register(&fsimckb_clk); - clk_set_parent(clk, &fsimckb_clk); - clk_set_rate(clk, 11000); - clk_set_rate(&fsimckb_clk, 11000); - clk_put(clk); + if (clk) { + clk_register(&fsimckb_clk); + clk_set_parent(clk, &fsimckb_clk); + clk_set_rate(clk, 11000); + clk_set_rate(&fsimckb_clk, 11000); + clk_put(clk); + } gpio_request(GPIO_PTU0, NULL); gpio_direction_output(GPIO_PTU0, 0); @@ -1159,8 +1212,10 @@ static int __init arch_setup(void) /* set VPU clock to 166 MHz */ clk = clk_get(NULL, "vpu_clk"); - clk_set_rate(clk, clk_round_rate(clk, 166000000)); - clk_put(clk); + if (clk) { + clk_set_rate(clk, clk_round_rate(clk, 166000000)); + clk_put(clk); + } /* enable IrDA */ gpio_request(GPIO_FN_IRDA_OUT, NULL); @@ -1175,6 +1230,38 @@ static int __init arch_setup(void) i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices)); + /* VOU */ + gpio_request(GPIO_FN_DV_D15, NULL); + gpio_request(GPIO_FN_DV_D14, NULL); + gpio_request(GPIO_FN_DV_D13, NULL); + gpio_request(GPIO_FN_DV_D12, NULL); + gpio_request(GPIO_FN_DV_D11, NULL); + gpio_request(GPIO_FN_DV_D10, NULL); + gpio_request(GPIO_FN_DV_D9, NULL); + gpio_request(GPIO_FN_DV_D8, NULL); + gpio_request(GPIO_FN_DV_CLKI, NULL); + gpio_request(GPIO_FN_DV_CLK, NULL); + gpio_request(GPIO_FN_DV_VSYNC, NULL); + gpio_request(GPIO_FN_DV_HSYNC, NULL); + + /* AK8813 power / reset sequence */ + gpio_request(GPIO_PTG4, NULL); + gpio_request(GPIO_PTU3, NULL); + /* Reset */ + gpio_direction_output(GPIO_PTG4, 0); + /* Power down */ + gpio_direction_output(GPIO_PTU3, 1); + + udelay(10); + + /* Power up, reset */ + gpio_set_value(GPIO_PTU3, 0); + + udelay(10); + + /* Remove reset */ + gpio_set_value(GPIO_PTG4, 1); + return platform_add_devices(ecovec_devices, ARRAY_SIZE(ecovec_devices)); } |