diff options
Diffstat (limited to 'arch/ppc/8xx_io/fec.c')
| -rw-r--r-- | arch/ppc/8xx_io/fec.c | 1983 |
1 files changed, 0 insertions, 1983 deletions
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c deleted file mode 100644 index 2c604d4f6e8b..000000000000 --- a/arch/ppc/8xx_io/fec.c +++ /dev/null @@ -1,1983 +0,0 @@ -/* - * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx. - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * This version of the driver is specific to the FADS implementation, - * since the board contains control registers external to the processor - * for the control of the LevelOne LXT970 transceiver. The MPC860T manual - * describes connections using the internal parallel port I/O, which - * is basically all of Port D. - * - * Includes support for the following PHYs: QS6612, LXT970, LXT971/2. - * - * Right now, I am very wasteful with the buffers. I allocate memory - * pages and then divide them into 2K frame buffers. This way I know I - * have buffers large enough to hold one frame within one buffer descriptor. - * Once I get this working, I will use 64 or 128 byte CPM buffers, which - * will be much more memory efficient and will easily handle lots of - * small packets. - * - * Much better multiple PHY support by Magnus Damm. - * Copyright (c) 2000 Ericsson Radio Systems AB. - * - * Make use of MII for PHY control configurable. - * Some fixes. - * Copyright (c) 2000-2002 Wolfgang Denk, DENX Software Engineering. - * - * Support for AMD AM79C874 added. - * Thomas Lange, thomas@corelatus.com - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/ptrace.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/spinlock.h> -#include <linux/bitops.h> -#ifdef CONFIG_FEC_PACKETHOOK -#include <linux/pkthook.h> -#endif - -#include <asm/8xx_immap.h> -#include <asm/pgtable.h> -#include <asm/mpc8xx.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/cpm1.h> - -#ifdef CONFIG_USE_MDIO -/* Forward declarations of some structures to support different PHYs -*/ - -typedef struct { - uint mii_data; - void (*funct)(uint mii_reg, struct net_device *dev); -} phy_cmd_t; - -typedef struct { - uint id; - char *name; - - const phy_cmd_t *config; - const phy_cmd_t *startup; - const phy_cmd_t *ack_int; - const phy_cmd_t *shutdown; -} phy_info_t; -#endif /* CONFIG_USE_MDIO */ - -/* The number of Tx and Rx buffers. These are allocated from the page - * pool. The code may assume these are power of two, so it is best - * to keep them that size. - * We don't need to allocate pages for the transmitter. We just use - * the skbuffer directly. - */ -#ifdef CONFIG_ENET_BIG_BUFFERS -#define FEC_ENET_RX_PAGES 16 -#define FEC_ENET_RX_FRSIZE 2048 -#define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE) -#define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES) -#define TX_RING_SIZE 16 /* Must be power of two */ -#define TX_RING_MOD_MASK 15 /* for this to work */ -#else -#define FEC_ENET_RX_PAGES 4 -#define FEC_ENET_RX_FRSIZE 2048 -#define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE) -#define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES) -#define TX_RING_SIZE 8 /* Must be power of two */ -#define TX_RING_MOD_MASK 7 /* for this to work */ -#endif - -/* Interrupt events/masks. -*/ -#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ -#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ -#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ -#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ -#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */ -#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ -#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */ -#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ -#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ -#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ - -/* -*/ -#define FEC_ECNTRL_PINMUX 0x00000004 -#define FEC_ECNTRL_ETHER_EN 0x00000002 -#define FEC_ECNTRL_RESET 0x00000001 - -#define FEC_RCNTRL_BC_REJ 0x00000010 -#define FEC_RCNTRL_PROM 0x00000008 -#define FEC_RCNTRL_MII_MODE 0x00000004 -#define FEC_RCNTRL_DRT 0x00000002 -#define FEC_RCNTRL_LOOP 0x00000001 - -#define FEC_TCNTRL_FDEN 0x00000004 -#define FEC_TCNTRL_HBC 0x00000002 -#define FEC_TCNTRL_GTS 0x00000001 - -/* Delay to wait for FEC reset command to complete (in us) -*/ -#define FEC_RESET_DELAY 50 - -/* The FEC stores dest/src/type, data, and checksum for receive packets. - */ -#define PKT_MAXBUF_SIZE 1518 -#define PKT_MINBUF_SIZE 64 -#define PKT_MAXBLR_SIZE 1520 - -/* The FEC buffer descriptors track the ring buffers. The rx_bd_base and - * tx_bd_base always point to the base of the buffer descriptors. The - * cur_rx and cur_tx point to the currently available buffer. - * The dirty_tx tracks the current buffer that is being sent by the - * controller. The cur_tx and dirty_tx are equal under both completely - * empty and completely full conditions. The empty/ready indicator in - * the buffer descriptor determines the actual condition. - */ -struct fec_enet_private { - /* The saved address of a sent-in-place packet/buffer, for skfree(). */ - struct sk_buff* tx_skbuff[TX_RING_SIZE]; - ushort skb_cur; - ushort skb_dirty; - - /* CPM dual port RAM relative addresses. - */ - cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */ - cbd_t *tx_bd_base; - cbd_t *cur_rx, *cur_tx; /* The next free ring entry */ - cbd_t *dirty_tx; /* The ring entries to be free()ed. */ - - /* Virtual addresses for the receive buffers because we can't - * do a __va() on them anymore. - */ - unsigned char *rx_vaddr[RX_RING_SIZE]; - - struct net_device_stats stats; - uint tx_full; - spinlock_t lock; - -#ifdef CONFIG_USE_MDIO - uint phy_id; - uint phy_id_done; - uint phy_status; - uint phy_speed; - phy_info_t *phy; - struct work_struct phy_task; - struct net_device *dev; - - uint sequence_done; - - uint phy_addr; -#endif /* CONFIG_USE_MDIO */ - - int link; - int old_link; - int full_duplex; - -#ifdef CONFIG_FEC_PACKETHOOK - unsigned long ph_lock; - fec_ph_func *ph_rxhandler; - fec_ph_func *ph_txhandler; - __u16 ph_proto; - volatile __u32 *ph_regaddr; - void *ph_priv; -#endif -}; - -static int fec_enet_open(struct net_device *dev); -static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev); -#ifdef CONFIG_USE_MDIO -static void fec_enet_mii(struct net_device *dev); -#endif /* CONFIG_USE_MDIO */ -#ifdef CONFIG_FEC_PACKETHOOK -static void fec_enet_tx(struct net_device *dev, __u32 regval); -static void fec_enet_rx(struct net_device *dev, __u32 regval); -#else -static void fec_enet_tx(struct net_device *dev); -static void fec_enet_rx(struct net_device *dev); -#endif -static int fec_enet_close(struct net_device *dev); -static struct net_device_stats *fec_enet_get_stats(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); -static void fec_restart(struct net_device *dev, int duplex); -static void fec_stop(struct net_device *dev); -static ushort my_enet_addr[3]; - -#ifdef CONFIG_USE_MDIO -/* MII processing. We keep this as simple as possible. Requests are - * placed on the list (if there is room). When the request is finished - * by the MII, an optional function may be called. - */ -typedef struct mii_list { - uint mii_regval; - void (*mii_func)(uint val, struct net_device *dev); - struct mii_list *mii_next; -} mii_list_t; - -#define NMII 20 -mii_list_t mii_cmds[NMII]; -mii_list_t *mii_free; -mii_list_t *mii_head; -mii_list_t *mii_tail; - -static int mii_queue(struct net_device *dev, int request, - void (*func)(uint, struct net_device *)); - -/* Make MII read/write commands for the FEC. -*/ -#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) -#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \ - (VAL & 0xffff)) -#define mk_mii_end 0 -#endif /* CONFIG_USE_MDIO */ - -/* Transmitter timeout. -*/ -#define TX_TIMEOUT (2*HZ) - -#ifdef CONFIG_USE_MDIO -/* Register definitions for the PHY. -*/ - -#define MII_REG_CR 0 /* Control Register */ -#define MII_REG_SR 1 /* Status Register */ -#define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */ -#define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */ -#define MII_REG_ANAR 4 /* A-N Advertisement Register */ -#define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */ -#define MII_REG_ANER 6 /* A-N Expansion Register */ -#define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */ -#define MII_REG_ANLPRNPR 8 /* A-N Link Partner Received Next Page Reg. */ - -/* values for phy_status */ - -#define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */ -#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */ -#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */ -#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */ -#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */ -#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */ -#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */ - -#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */ -#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */ -#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */ -#define PHY_STAT_SPMASK 0xf000 /* mask for speed */ -#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */ -#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */ -#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */ -#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */ -#endif /* CONFIG_USE_MDIO */ - -#ifdef CONFIG_FEC_PACKETHOOK -int -fec_register_ph(struct net_device *dev, fec_ph_func *rxfun, fec_ph_func *txfun, - __u16 proto, volatile __u32 *regaddr, void *priv) -{ - struct fec_enet_private *fep; - int retval = 0; - - fep = dev->priv; - - if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) { - /* Someone is messing with the packet hook */ - return -EAGAIN; - } - if (fep->ph_rxhandler != NULL || fep->ph_txhandler != NULL) { - retval = -EBUSY; - goto out; - } - fep->ph_rxhandler = rxfun; - fep->ph_txhandler = txfun; - fep->ph_proto = proto; - fep->ph_regaddr = regaddr; - fep->ph_priv = priv; - - out: - fep->ph_lock = 0; - - return retval; -} - - -int -fec_unregister_ph(struct net_device *dev) -{ - struct fec_enet_private *fep; - int retval = 0; - - fep = dev->priv; - - if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) { - /* Someone is messing with the packet hook */ - return -EAGAIN; - } - - fep->ph_rxhandler = fep->ph_txhandler = NULL; - fep->ph_proto = 0; - fep->ph_regaddr = NULL; - fep->ph_priv = NULL; - - fep->ph_lock = 0; - - return retval; -} - -EXPORT_SYMBOL(fec_register_ph); -EXPORT_SYMBOL(fec_unregister_ph); - -#endif /* CONFIG_FEC_PACKETHOOK */ - -static int -fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct fec_enet_private *fep; - volatile fec_t *fecp; - volatile cbd_t *bdp; - - fep = dev->priv; - fecp = (volatile fec_t*)dev->base_addr; - - if (!fep->link) { - /* Link is down or autonegotiation is in progress. */ - return 1; - } - - /* Fill in a Tx ring entry */ - bdp = fep->cur_tx; - -#ifndef final_version - if (bdp->cbd_sc & BD_ENET_TX_READY) { - /* Ooops. All transmit buffers are full. Bail out. - * This should not happen, since dev->tbusy should be set. - */ - printk("%s: tx queue full!.\n", dev->name); - return 1; - } -#endif - - /* Clear all of the status flags. - */ - bdp->cbd_sc &= ~BD_ENET_TX_STATS; - - /* Set buffer length and buffer pointer. - */ - bdp->cbd_bufaddr = __pa(skb->data); - bdp->cbd_datlen = skb->len; - - /* Save skb pointer. - */ - fep->tx_skbuff[fep->skb_cur] = skb; - - fep->stats.tx_bytes += skb->len; - fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK; - - /* Push the data cache so the CPM does not get stale memory - * data. - */ - flush_dcache_range((unsigned long)skb->data, - (unsigned long)skb->data + skb->len); - - /* disable interrupts while triggering transmit */ - spin_lock_irq(&fep->lock); - - /* Send it on its way. Tell FEC its ready, interrupt when done, - * its the last BD of the frame, and to put the CRC on the end. - */ - - bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR - | BD_ENET_TX_LAST | BD_ENET_TX_TC); - - dev->trans_start = jiffies; - - /* Trigger transmission start */ - fecp->fec_x_des_active = 0x01000000; - - /* If this was the last BD in the ring, start at the beginning again. - */ - if (bdp->cbd_sc & BD_ENET_TX_WRAP) { - bdp = fep->tx_bd_base; - } else { - bdp++; - } - - if (bdp->cbd_sc & BD_ENET_TX_READY) { - netif_stop_queue(dev); - fep->tx_full = 1; - } - - fep->cur_tx = (cbd_t *)bdp; - - spin_unlock_irq(&fep->lock); - - return 0; -} - -static void -fec_timeout(struct net_device *dev) -{ - struct fec_enet_private *fep = dev->priv; - - printk("%s: transmit timed out.\n", dev->name); - fep->stats.tx_errors++; -#ifndef final_version - { - int i; - cbd_t *bdp; - - printk("Ring data dump: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n", - (unsigned long)fep->cur_tx, fep->tx_full ? " (full)" : "", - (unsigned long)fep->dirty_tx, - (unsigned long)fep->cur_rx); - - bdp = fep->tx_bd_base; - printk(" tx: %u buffers\n", TX_RING_SIZE); - for (i = 0 ; i < TX_RING_SIZE; i++) { - printk(" %08x: %04x %04x %08x\n", - (uint) bdp, - bdp->cbd_sc, - bdp->cbd_datlen, - bdp->cbd_bufaddr); - bdp++; - } - - bdp = fep->rx_bd_base; - printk(" rx: %lu buffers\n", RX_RING_SIZE); - for (i = 0 ; i < RX_RING_SIZE; i++) { - printk(" %08x: %04x %04x %08x\n", - (uint) bdp, - bdp->cbd_sc, - bdp->cbd_datlen, - bdp->cbd_bufaddr); - bdp++; - } - } -#endif - if (!fep->tx_full) - netif_wake_queue(dev); -} - -/* The interrupt handler. - * This is called from the MPC core interrupt. - */ -static irqreturn_t -fec_enet_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - volatile fec_t *fecp; - uint int_events; -#ifdef CONFIG_FEC_PACKETHOOK - struct fec_enet_private *fep = dev->priv; - __u32 regval; - - if (fep->ph_regaddr) regval = *fep->ph_regaddr; -#endif - fecp = (volatile fec_t*)dev->base_addr; - - /* Get the interrupt events that caused us to be here. - */ - while ((int_events = fecp->fec_ievent) != 0) { - fecp->fec_ievent = int_events; - if ((int_events & (FEC_ENET_HBERR | FEC_ENET_BABR | - FEC_ENET_BABT | FEC_ENET_EBERR)) != 0) { - printk("FEC ERROR %x\n", int_events); - } - - /* Handle receive event in its own function. - */ - if (int_events & FEC_ENET_RXF) { -#ifdef CONFIG_FEC_PACKETHOOK - fec_enet_rx(dev, regval); -#else - fec_enet_rx(dev); -#endif - } - - /* Transmit OK, or non-fatal error. Update the buffer - descriptors. FEC handles all errors, we just discover - them as part of the transmit process. - */ - if (int_events & FEC_ENET_TXF) { -#ifdef CONFIG_FEC_PACKETHOOK - fec_enet_tx(dev, regval); -#else - fec_enet_tx(dev); -#endif - } - - if (int_events & FEC_ENET_MII) { -#ifdef CONFIG_USE_MDIO - fec_enet_mii(dev); -#else -printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__, __LINE__, __func__); -#endif /* CONFIG_USE_MDIO */ - } - - } - return IRQ_RETVAL(IRQ_HANDLED); -} - - -static void -#ifdef CONFIG_FEC_PACKETHOOK -fec_enet_tx(struct net_device *dev, __u32 regval) -#else -fec_enet_tx(struct net_device *dev) -#endif -{ - struct fec_enet_private *fep; - volatile cbd_t *bdp; - struct sk_buff *skb; - - fep = dev->priv; - /* lock while transmitting */ - spin_lock(&fep->lock); - bdp = fep->dirty_tx; - - while ((bdp->cbd_sc&BD_ENET_TX_READY) == 0) { - if (bdp == fep->cur_tx && fep->tx_full == 0) break; - - skb = fep->tx_skbuff[fep->skb_dirty]; - /* Check for errors. */ - if (bdp->cbd_sc & (BD_ENET_TX_HB | BD_ENET_TX_LC | - BD_ENET_TX_RL | BD_ENET_TX_UN | - BD_ENET_TX_CSL)) { - fep->stats.tx_errors++; - if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */ - fep->stats.tx_heartbeat_errors++; - if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */ - fep->stats.tx_window_errors++; - if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */ - fep->stats.tx_aborted_errors++; - if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */ - fep->stats.tx_fifo_errors++; - if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */ - fep->stats.tx_carrier_errors++; - } else { -#ifdef CONFIG_FEC_PACKETHOOK - /* Packet hook ... */ - if (fep->ph_txhandler && - ((struct ethhdr *)skb->data)->h_proto - == fep->ph_proto) { - fep->ph_txhandler((__u8*)skb->data, skb->len, - regval, fep->ph_priv); - } -#endif - fep->stats.tx_packets++; - } - -#ifndef final_version - if (bdp->cbd_sc & BD_ENET_TX_READY) - printk("HEY! Enet xmit interrupt and TX_READY.\n"); -#endif - /* Deferred means some collisions occurred during transmit, - * but we eventually sent the packet OK. - */ - if (bdp->cbd_sc & BD_ENET_TX_DEF) - fep->stats.collisions++; - - /* Free the sk buffer associated with this last transmit. - */ -#if 0 -printk("TXI: %x %x %x\n", bdp, skb, fep->skb_dirty); -#endif - dev_kfree_skb_irq (skb/*, FREE_WRITE*/); - fep->tx_skbuff[fep->skb_dirty] = NULL; - fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK; - - /* Update pointer to next buffer descriptor to be transmitted. - */ - if (bdp->cbd_sc & BD_ENET_TX_WRAP) - bdp = fep->tx_bd_base; - else - bdp++; - - /* Since we have freed up a buffer, the ring is no longer - * full. - */ - if (fep->tx_full) { - fep->tx_full = 0; - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); - } -#ifdef CONFIG_FEC_PACKETHOOK - /* Re-read register. Not exactly guaranteed to be correct, - but... */ - if (fep->ph_regaddr) regval = *fep->ph_regaddr; -#endif - } - fep->dirty_tx = (cbd_t *)bdp; - spin_unlock(&fep->lock); -} - - -/* During a receive, the cur_rx points to the current incoming buffer. - * When we update through the ring, if the next incoming buffer has - * not been given to the system, we just set the empty indicator, - * effectively tossing the packet. - */ -static void -#ifdef CONFIG_FEC_PACKETHOOK -fec_enet_rx(struct net_device *dev, __u32 regval) -#else -fec_enet_rx(struct net_device *dev) -#endif -{ - struct fec_enet_private *fep; - volatile fec_t *fecp; - volatile cbd_t *bdp; - struct sk_buff *skb; - ushort pkt_len; - __u8 *data; - - fep = dev->priv; - fecp = (volatile fec_t*)dev->base_addr; - - /* First, grab all of the stats for the incoming packet. - * These get messed up if we get called due to a busy condition. - */ - bdp = fep->cur_rx; - -while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) { - -#ifndef final_version - /* Since we have allocated space to hold a complete frame, - * the last indicator should be set. - */ - if ((bdp->cbd_sc & BD_ENET_RX_LAST) == 0) - printk("FEC ENET: rcv is not +last\n"); -#endif - - /* Check for errors. */ - if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | - BD_ENET_RX_CR | BD_ENET_RX_OV)) { - fep->stats.rx_errors++; - if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) { - /* Frame too long or too short. */ - fep->stats.rx_length_errors++; - } - if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */ - fep->stats.rx_frame_errors++; - if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */ - fep->stats.rx_crc_errors++; - if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */ - fep->stats.rx_crc_errors++; - } - - /* Report late collisions as a frame error. - * On this error, the BD is closed, but we don't know what we - * have in the buffer. So, just drop this frame on the floor. - */ - if (bdp->cbd_sc & BD_ENET_RX_CL) { - fep->stats.rx_errors++; - fep->stats.rx_frame_errors++; - goto rx_processing_done; - } - - /* Process the incoming frame. - */ - fep->stats.rx_packets++; - pkt_len = bdp->cbd_datlen; - fep->stats.rx_bytes += pkt_len; - data = fep->rx_vaddr[bdp - fep->rx_bd_base]; - -#ifdef CONFIG_FEC_PACKETHOOK - /* Packet hook ... */ - if (fep->ph_rxhandler) { - if (((struct ethhdr *)data)->h_proto == fep->ph_proto) { - switch (fep->ph_rxhandler(data, pkt_len, regval, - fep->ph_priv)) { - case 1: - goto rx_processing_done; - break; - case 0: - break; - default: - fep->stats.rx_errors++; - goto rx_processing_done; - } - } - } - - /* If it wasn't filtered - copy it to an sk buffer. */ -#endif - - /* This does 16 byte alignment, exactly what we need. - * The packet length includes FCS, but we don't want to - * include that when passing upstream as it messes up - * bridging applications. - */ - skb = dev_alloc_skb(pkt_len-4); - - if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet.\n", dev->name); - fep->stats.rx_dropped++; - } else { - skb_put(skb,pkt_len-4); /* Make room */ - skb_copy_to_linear_data(skb, data, pkt_len-4); - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - } - rx_processing_done: - - /* Clear the status flags for this buffer. - */ - bdp->cbd_sc &= ~BD_ENET_RX_STATS; - - /* Mark the buffer empty. - */ - bdp->cbd_sc |= BD_ENET_RX_EMPTY; - - /* Update BD pointer to next entry. - */ - if (bdp->cbd_sc & BD_ENET_RX_WRAP) - bdp = fep->rx_bd_base; - else - bdp++; - -#if 1 - /* Doing this here will keep the FEC running while we process - * incoming frames. On a heavily loaded network, we should be - * able to keep up at the expense of system resources. - */ - fecp->fec_r_des_active = 0x01000000; -#endif -#ifdef CONFIG_FEC_PACKETHOOK - /* Re-read register. Not exactly guaranteed to be correct, - but... */ - if (fep->ph_regaddr) regval = *fep->ph_regaddr; -#endif - } /* while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) */ - fep->cur_rx = (cbd_t *)bdp; - -#if 0 - /* Doing this here will allow us to process all frames in the - * ring before the FEC is allowed to put more there. On a heavily - * loaded network, some frames may be lost. Unfortunately, this - * increases the interrupt overhead since we can potentially work - * our way back to the interrupt return only to come right back - * here. - */ - fecp->fec_r_des_active = 0x01000000; -#endif -} - - -#ifdef CONFIG_USE_MDIO -static void -fec_enet_mii(struct net_device *dev) -{ - struct fec_enet_private *fep; - volatile fec_t *ep; - mii_list_t *mip; - uint mii_reg; - - fep = (struct fec_enet_private *)dev->priv; - ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec); - mii_reg = ep->fec_mii_data; - - if ((mip = mii_head) == NULL) { - printk("MII and no head!\n"); - return; - } - - if (mip->mii_func != NULL) - (*(mip->mii_func))(mii_reg, dev); - - mii_head = mip->mii_next; - mip->mii_next = mii_free; - mii_free = mip; - - if ((mip = mii_head) != NULL) { - ep->fec_mii_data = mip->mii_regval; - - } -} - -static int -mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *)) -{ - struct fec_enet_private *fep; - unsigned long flags; - mii_list_t *mip; - int retval; - - /* Add PHY address to register command. - */ - fep = dev->priv; - regval |= fep->phy_addr << 23; - - retval = 0; - - /* lock while modifying mii_list */ - spin_lock_irqsave(&fep->lock, flags); - - if ((mip = mii_free) != NULL) { - mii_free = mip->mii_next; - mip->mii_regval = regval; - mip->mii_func = func; - mip->mii_next = NULL; - if (mii_head) { - mii_tail->mii_next = mip; - mii_tail = mip; - } else { - mii_head = mii_tail = mip; - (&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec))->fec_mii_data = regval; - } - } else { - retval = 1; - } - - spin_unlock_irqrestore(&fep->lock, flags); - - return(retval); -} - -static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c) -{ - int k; - - if(!c) - return; - - for(k = 0; (c+k)->mii_data != mk_mii_end; k++) - mii_queue(dev, (c+k)->mii_data, (c+k)->funct); -} - -static void mii_parse_sr(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = dev->priv; - volatile uint *s = &(fep->phy_status); - - *s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC); - - if (mii_reg & 0x0004) - *s |= PHY_STAT_LINK; - if (mii_reg & 0x0010) - *s |= PHY_STAT_FAULT; - if (mii_reg & 0x0020) - *s |= PHY_STAT_ANC; - - fep->link = (*s & PHY_STAT_LINK) ? 1 : 0; -} - -static void mii_parse_cr(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = dev->priv; - volatile uint *s = &(fep->phy_status); - - *s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP); - - if (mii_reg & 0x1000) - *s |= PHY_CONF_ANE; - if (mii_reg & 0x4000) - *s |= PHY_CONF_LOOP; -} - -static void mii_parse_anar(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = dev->priv; - volatile uint *s = &(fep->phy_status); - - *s &= ~(PHY_CONF_SPMASK); - - if (mii_reg & 0x0020) - *s |= PHY_CONF_10HDX; - if (mii_reg & 0x0040) - *s |= PHY_CONF_10FDX; - if (mii_reg & 0x0080) - *s |= PHY_CONF_100HDX; - if (mii_reg & 0x00100) - *s |= PHY_CONF_100FDX; -} -#if 0 -static void mii_disp_reg(uint mii_reg, struct net_device *dev) -{ - printk("reg %u = 0x%04x\n", (mii_reg >> 18) & 0x1f, mii_reg & 0xffff); -} -#endif - -/* ------------------------------------------------------------------------- */ -/* The Level one LXT970 is used by many boards */ - -#ifdef CONFIG_FEC_LXT970 - -#define MII_LXT970_MIRROR 16 /* Mirror register */ -#define MII_LXT970_IER 17 /* Interrupt Enable Register */ -#define MII_LXT970_ISR 18 /* Interrupt Status Register */ -#define MII_LXT970_CONFIG 19 /* Configuration Register */ -#define MII_LXT970_CSR 20 /* Chip Status Register */ - -static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = dev->priv; - volatile uint *s = &(fep->phy_status); - - *s &= ~(PHY_STAT_SPMASK); - - if (mii_reg & 0x0800) { - if (mii_reg & 0x1000) - *s |= PHY_STAT_100FDX; - else - *s |= PHY_STAT_100HDX; - } - else { - if (mii_reg & 0x1000) - *s |= PHY_STAT_10FDX; - else - *s |= PHY_STAT_10HDX; - } -} - -static phy_info_t phy_info_lxt970 = { - 0x07810000, - "LXT970", - - (const phy_cmd_t []) { /* config */ -#if 0 -// { mk_mii_write(MII_REG_ANAR, 0x0021), NULL }, - - /* Set default operation of 100-TX....for some reason - * some of these bits are set on power up, which is wrong. - */ - { mk_mii_write(MII_LXT970_CONFIG, 0), NULL }, -#endif - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* startup - enable interrupts */ - { mk_mii_write(MII_LXT970_IER, 0x0002), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* ack_int */ - /* read SR and ISR to acknowledge */ - - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_read(MII_LXT970_ISR), NULL }, - - /* find out the current status */ - - { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* shutdown - disable interrupts */ - { mk_mii_write(MII_LXT970_IER, 0x0000), NULL }, - { mk_mii_end, } - }, -}; - -#endif /* CONFIG_FEC_LXT970 */ - -/* ------------------------------------------------------------------------- */ -/* The Level one LXT971 is used on some of my custom boards */ - -#ifdef CONFIG_FEC_LXT971 - -/* register definitions for the 971 */ - -#define MII_LXT971_PCR 16 /* Port Control Register */ -#define MII_LXT971_SR2 17 /* Status Register 2 */ -#define MII_LXT971_IER 18 /* Interrupt Enable Register */ -#define MII_LXT971_ISR 19 /* Interrupt Status Register */ -#define MII_LXT971_LCR 20 /* LED Control Register */ -#define MII_LXT971_TCR 30 /* Transmit Control Register */ - -/* - * I had some nice ideas of running the MDIO faster... - * The 971 should support 8MHz and I tried it, but things acted really - * weird, so 2.5 MHz ought to be enough for anyone... - */ - -static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = dev->priv; - volatile uint *s = &(fep->phy_status); - - *s &= ~(PHY_STAT_SPMASK); - - if (mii_reg & 0x4000) { - if (mii_reg & 0x0200) - *s |= PHY_STAT_100FDX; - else - *s |= PHY_STAT_100HDX; - } - else { - if (mii_reg & 0x0200) - *s |= PHY_STAT_10FDX; - else - *s |= PHY_STAT_10HDX; - } - if (mii_reg & 0x0008) - *s |= PHY_STAT_FAULT; -} - -static phy_info_t phy_info_lxt971 = { - 0x0001378e, - "LXT971", - - (const phy_cmd_t []) { /* config */ -// { mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10 Mbps, HD */ - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* startup - enable interrupts */ - { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - - /* Somehow does the 971 tell me that the link is down - * the first read after power-up. - * read here to get a valid value in ack_int */ - - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* ack_int */ - /* find out the current status */ - - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, - - /* we only need to read ISR to acknowledge */ - - { mk_mii_read(MII_LXT971_ISR), NULL }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* shutdown - disable interrupts */ - { mk_mii_write(MII_LXT971_IER, 0x0000), NULL }, - { mk_mii_end, } - }, -}; - -#endif /* CONFIG_FEC_LXT970 */ - - -/* ------------------------------------------------------------------------- */ -/* The Quality Semiconductor QS6612 is used on the RPX CLLF */ - -#ifdef CONFIG_FEC_QS6612 - -/* register definitions */ - -#define MII_QS6612_MCR 17 /* Mode Control Register */ -#define MII_QS6612_FTR 27 /* Factory Test Register */ -#define MII_QS6612_MCO 28 /* Misc. Control Register */ -#define MII_QS6612_ISR 29 /* Interrupt Source Register */ -#define MII_QS6612_IMR 30 /* Interrupt Mask Register */ -#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */ - -static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = dev->priv; - volatile uint *s = &(fep->phy_status); - - *s &= ~(PHY_STAT_SPMASK); - - switch((mii_reg >> 2) & 7) { - case 1: *s |= PHY_STAT_10HDX; break; - case 2: *s |= PHY_STAT_100HDX; break; - case 5: *s |= PHY_STAT_10FDX; break; - case 6: *s |= PHY_STAT_100FDX; break; - } -} - -static phy_info_t phy_info_qs6612 = { - 0x00181440, - "QS6612", - - (const phy_cmd_t []) { /* config */ -// { mk_mii_write(MII_REG_ANAR, 0x061), NULL }, /* 10 Mbps */ - - /* The PHY powers up isolated on the RPX, - * so send a command to allow operation. - */ - - { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL }, - - /* parse cr and anar to get some info */ - - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* startup - enable interrupts */ - { mk_mii_write(MII_QS6612_IMR, 0x003a), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* ack_int */ - - /* we need to read ISR, SR and ANER to acknowledge */ - - { mk_mii_read(MII_QS6612_ISR), NULL }, - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_read(MII_REG_ANER), NULL }, - - /* read pcr to get info */ - - { mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* shutdown - disable interrupts */ - { mk_mii_write(MII_QS6612_IMR, 0x0000), NULL }, - { mk_mii_end, } - }, -}; - -#endif /* CONFIG_FEC_QS6612 */ - -/* ------------------------------------------------------------------------- */ -/* The Advanced Micro Devices AM79C874 is used on the ICU862 */ - -#ifdef CONFIG_FEC_AM79C874 - -/* register definitions for the 79C874 */ - -#define MII_AM79C874_MFR 16 /* Miscellaneous Features Register */ -#define MII_AM79C874_ICSR 17 /* Interrupt Control/Status Register */ -#define MII_AM79C874_DR 18 /* Diagnostic Register */ -#define MII_AM79C874_PMLR 19 /* Power Management & Loopback Register */ -#define MII_AM79C874_MCR 21 /* Mode Control Register */ -#define MII_AM79C874_DC 23 /* Disconnect Counter */ -#define MII_AM79C874_REC 24 /* Receiver Error Counter */ - -static void mii_parse_amd79c874_dr(uint mii_reg, struct net_device *dev, uint data) -{ - volatile struct fec_enet_private *fep = dev->priv; - uint s = fep->phy_status; - - s &= ~(PHY_STAT_SPMASK); - - /* Register 18: Bit 10 is data rate, 11 is Duplex */ - switch ((mii_reg >> 10) & 3) { - case 0: s |= PHY_STAT_10HDX; break; - case 1: s |= PHY_STAT_100HDX; break; - case 2: s |= PHY_STAT_10FDX; break; - case 3: s |= PHY_STAT_100FDX; break; - } - - fep->phy_status = s; -} - -static phy_info_t phy_info_amd79c874 = { - 0x00022561, - "AM79C874", - - (const phy_cmd_t []) { /* config */ -// { mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10 Mbps, HD */ - { mk_mii_read(MII_REG_CR), mii_parse_cr }, - { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* startup - enable interrupts */ - { mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL }, - { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* ack_int */ - /* find out the current status */ - - { mk_mii_read(MII_REG_SR), mii_parse_sr }, - { mk_mii_read(MII_AM79C874_DR), mii_parse_amd79c874_dr }, - - /* we only need to read ICSR to acknowledge */ - - { mk_mii_read(MII_AM79C874_ICSR), NULL }, - { mk_mii_end, } - }, - (const phy_cmd_t []) { /* shutdown - disable interrupts */ - { mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL }, - { mk_mii_end, } - }, -}; - -#endif /* CONFIG_FEC_AM79C874 */ - -static phy_info_t *phy_info[] = { - -#ifdef CONFIG_FEC_LXT970 - &phy_info_lxt970, -#endif /* CONFIG_FEC_LXT970 */ - -#ifdef CONFIG_FEC_LXT971 - &phy_info_lxt971, -#endif /* CONFIG_FEC_LXT971 */ - -#ifdef CONFIG_FEC_QS6612 - &phy_info_qs6612, -#endif /* CONFIG_FEC_QS6612 */ - -#ifdef CONFIG_FEC_AM79C874 - &phy_info_amd79c874, -#endif /* CONFIG_FEC_AM79C874 */ - - NULL -}; - -static void mii_display_status(struct net_device *dev) -{ - struct fec_enet_private *fep = dev->priv; - volatile uint *s = &(fep->phy_status); - - if (!fep->link && !fep->old_link) { - /* Link is still down - don't print anything */ - return; - } - - printk("%s: status: ", dev->name); - - if (!fep->link) { - printk("link down"); - } else { - printk("link up"); - - switch(*s & PHY_STAT_SPMASK) { - case PHY_STAT_100FDX: printk(", 100 Mbps Full Duplex"); break; - case PHY_STAT_100HDX: printk(", 100 Mbps Half Duplex"); break; - case PHY_STAT_10FDX: printk(", 10 Mbps Full Duplex"); break; - case PHY_STAT_10HDX: printk(", 10 Mbps Half Duplex"); break; - default: - printk(", Unknown speed/duplex"); - } - - if (*s & PHY_STAT_ANC) - printk(", auto-negotiation complete"); - } - - if (*s & PHY_STAT_FAULT) - printk(", remote fault"); - - printk(".\n"); -} - -static void mii_display_config(struct work_struct *work) -{ - struct fec_enet_private *fep = - container_of(work, struct fec_enet_private, phy_task); - struct net_device *dev = fep->dev; - volatile uint *s = &(fep->phy_status); - - printk("%s: config: auto-negotiation ", dev->name); - - if (*s & PHY_CONF_ANE) - printk("on"); - else - printk("off"); - - if (*s & PHY_CONF_100FDX) - printk(", 100FDX"); - if (*s & PHY_CONF_100HDX) - printk(", 100HDX"); - if (*s & PHY_CONF_10FDX) - printk(", 10FDX"); - if (*s & PHY_CONF_10HDX) - printk(", 10HDX"); - if (!(*s & PHY_CONF_SPMASK)) - printk(", No speed/duplex selected?"); - - if (*s & PHY_CONF_LOOP) - printk(", loopback enabled"); - - printk(".\n"); - - fep->sequence_done = 1; -} - -static void mii_relink(struct work_struct *work) -{ - struct fec_enet_private *fep = - container_of(work, struct fec_enet_private, phy_task); - struct net_device *dev = fep->dev; - int duplex; - - fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0; - mii_display_status(dev); - fep->old_link = fep->link; - - if (fep->link) { - duplex = 0; - if (fep->phy_status - & (PHY_STAT_100FDX | PHY_STAT_10FDX)) - duplex = 1; - fec_restart(dev, duplex); - } - else - fec_stop(dev); - -#if 0 - enable_irq(fep->mii_irq); -#endif - -} - -static void mii_queue_relink(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = dev->priv; - - fep->dev = dev; - INIT_WORK(&fep->phy_task, mii_relink); - schedule_work(&fep->phy_task); -} - -static void mii_queue_config(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep = dev->priv; - - fep->dev = dev; - INIT_WORK(&fep->phy_task, mii_display_config); - schedule_work(&fep->phy_task); -} - - - -phy_cmd_t phy_cmd_relink[] = { { mk_mii_read(MII_REG_CR), mii_queue_relink }, - { mk_mii_end, } }; -phy_cmd_t phy_cmd_config[] = { { mk_mii_read(MII_REG_CR), mii_queue_config }, - { mk_mii_end, } }; - - - -/* Read remainder of PHY ID. -*/ -static void -mii_discover_phy3(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep; - int i; - - fep = dev->priv; - fep->phy_id |= (mii_reg & 0xffff); - - for(i = 0; phy_info[i]; i++) - if(phy_info[i]->id == (fep->phy_id >> 4)) - break; - - if(!phy_info[i]) - panic("%s: PHY id 0x%08x is not supported!\n", - dev->name, fep->phy_id); - - fep->phy = phy_info[i]; - fep->phy_id_done = 1; - - printk("%s: Phy @ 0x%x, type %s (0x%08x)\n", - dev->name, fep->phy_addr, fep->phy->name, fep->phy_id); -} - -/* Scan all of the MII PHY addresses looking for someone to respond - * with a valid ID. This usually happens quickly. - */ -static void -mii_discover_phy(uint mii_reg, struct net_device *dev) -{ - struct fec_enet_private *fep; - uint phytype; - - fep = dev->priv; - - if ((phytype = (mii_reg & 0xffff)) != 0xffff) { - - /* Got first part of ID, now get remainder. - */ - fep->phy_id = phytype << 16; - mii_queue(dev, mk_mii_read(MII_REG_PHYIR2), mii_discover_phy3); - } else { - fep->phy_addr++; - if (fep->phy_addr < 32) { - mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), - mii_discover_phy); - } else { - printk("fec: No PHY device found.\n"); - } - } -} -#endif /* CONFIG_USE_MDIO */ - -/* This interrupt occurs when the PHY detects a link change. -*/ -static -#ifdef CONFIG_RPXCLASSIC -void mii_link_interrupt(void *dev_id) -#else -irqreturn_t mii_link_interrupt(int irq, void * dev_id) -#endif -{ -#ifdef CONFIG_USE_MDIO - struct net_device *dev = dev_id; - struct fec_enet_private *fep = dev->priv; - volatile immap_t *immap = (immap_t *)IMAP_ADDR; - volatile fec_t *fecp = &(immap->im_cpm.cp_fec); - unsigned int ecntrl = fecp->fec_ecntrl; - - /* We need the FEC enabled to access the MII - */ - if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) { - fecp->fec_ecntrl |= FEC_ECNTRL_ETHER_EN; - } -#endif /* CONFIG_USE_MDIO */ - -#if 0 - disable_irq(fep->mii_irq); /* disable now, enable later */ -#endif - - -#ifdef CONFIG_USE_MDIO - mii_do_cmd(dev, fep->phy->ack_int); - mii_do_cmd(dev, phy_cmd_relink); /* restart and display status */ - - if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) { - fecp->fec_ecntrl = ecntrl; /* restore old settings */ - } -#else -printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__, __LINE__, __func__); -#endif /* CONFIG_USE_MDIO */ - -#ifndef CONFIG_RPXCLASSIC - return IRQ_RETVAL(IRQ_HANDLED); -#endif /* CONFIG_RPXCLASSIC */ -} - -static int -fec_enet_open(struct net_device *dev) -{ - struct fec_enet_private *fep = dev->priv; - - /* I should reset the ring buffers here, but I don't yet know - * a simple way to do that. - */ - -#ifdef CONFIG_USE_MDIO - fep->sequence_done = 0; - fep->link = 0; - - if (fep->phy) { - mii_do_cmd(dev, fep->phy->ack_int); - mii_do_cmd(dev, fep->phy->config); - mii_do_cmd(dev, phy_cmd_config); /* display configuration */ - while(!fep->sequence_done) - schedule(); - - mii_do_cmd(dev, fep->phy->startup); - netif_start_queue(dev); - return 0; /* Success */ - } - return -ENODEV; /* No PHY we understand */ -#else - fep->link = 1; - netif_start_queue(dev); - return 0; /* Success */ -#endif /* CONFIG_USE_MDIO */ - -} - -static int -fec_enet_close(struct net_device *dev) -{ - /* Don't know what to do yet. - */ - netif_stop_queue(dev); - fec_stop(dev); - - return 0; -} - -static struct net_device_stats *fec_enet_get_stats(struct net_device *dev) -{ - struct fec_enet_private *fep = (struct fec_enet_private *)dev->priv; - - return &fep->stats; -} - -/* Set or clear the multicast filter for this adaptor. - * Skeleton taken from sunlance driver. - * The CPM Ethernet implementation allows Multicast as well as individual - * MAC address filtering. Some of the drivers check to make sure it is - * a group multicast address, and discard those that are not. I guess I - * will do the same for now, but just remove the test if you want - * individual filtering as well (do the upper net layers want or support - * this kind of feature?). - */ - -static void set_multicast_list(struct net_device *dev) -{ - struct fec_enet_private *fep; - volatile fec_t *ep; - - fep = (struct fec_enet_private *)dev->priv; - ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec); - - if (dev->flags&IFF_PROMISC) { - - /* Log any net taps. */ - printk("%s: Promiscuous mode enabled.\n", dev->name); - ep->fec_r_cntrl |= FEC_RCNTRL_PROM; - } else { - - ep->fec_r_cntrl &= ~FEC_RCNTRL_PROM; - - if (dev->flags & IFF_ALLMULTI) { - /* Catch all multicast addresses, so set the - * filter to all 1's. - */ - ep->fec_hash_table_high = 0xffffffff; - ep->fec_hash_table_low = 0xffffffff; - } -#if 0 - else { - /* Clear filter and add the addresses in the list. - */ - ep->sen_gaddr1 = 0; - ep->sen_gaddr2 = 0; - ep->sen_gaddr3 = 0; - ep->sen_gaddr4 = 0; - - dmi = dev->mc_list; - - for (i=0; i<dev->mc_count; i++) { - - /* Only support group multicast for now. - */ - if (!(dmi->dmi_addr[0] & 1)) - continue; - - /* The address in dmi_addr is LSB first, - * and taddr is MSB first. We have to - * copy bytes MSB first from dmi_addr. - */ - mcptr = (u_char *)dmi->dmi_addr + 5; - tdptr = (u_char *)&ep->sen_taddrh; - for (j=0; j<6; j++) - *tdptr++ = *mcptr--; - - /* Ask CPM to run CRC and set bit in - * filter mask. - */ - cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC1, CPM_CR_SET_GADDR) | CPM_CR_FLG; - /* this delay is necessary here -- Cort */ - udelay(10); - while (cpmp->cp_cpcr & CPM_CR_FLG); - } - } -#endif - } -} - -/* Initialize the FEC Ethernet on 860T. - */ -static int __init fec_enet_init(void) -{ - struct net_device *dev; - struct fec_enet_private *fep; - int i, j, k, err; - unsigned char *eap, *iap, *ba; - dma_addr_t mem_addr; - volatile cbd_t *bdp; - cbd_t *cbd_base; - volatile immap_t *immap; - volatile fec_t *fecp; - bd_t *bd; -#ifdef CONFIG_SCC_ENET - unsigned char tmpaddr[6]; -#endif - - immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */ - - bd = (bd_t *)__res; - - dev = alloc_etherdev(sizeof(*fep)); - if (!dev) - return -ENOMEM; - - fep = dev->priv; - - fecp = &(immap->im_cpm.cp_fec); - - /* Whack a reset. We should wait for this. - */ - fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET; - for (i = 0; - (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); - ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printk ("FEC Reset timeout!\n"); - } - - /* Set the Ethernet address. If using multiple Enets on the 8xx, - * this needs some work to get unique addresses. - */ - eap = (unsigned char *)my_enet_addr; - iap = bd->bi_enetaddr; - -#ifdef CONFIG_SCC_ENET - /* - * If a board has Ethernet configured both on a SCC and the - * FEC, it needs (at least) 2 MAC addresses (we know that Sun - * disagrees, but anyway). For the FEC port, we create - * another address by setting one of the address bits above - * something that would have (up to now) been allocated. - */ - for (i=0; i<6; i++) - tmpaddr[i] = *iap++; - tmpaddr[3] |= 0x80; - iap = tmpaddr; -#endif - - for (i=0; i<6; i++) { - dev->dev_addr[i] = *eap++ = *iap++; - } - - /* Allocate memory for buffer descriptors. - */ - if (((RX_RING_SIZE + TX_RING_SIZE) * sizeof(cbd_t)) > PAGE_SIZE) { - printk("FEC init error. Need more space.\n"); - printk("FEC initialization failed.\n"); - return 1; - } - cbd_base = (cbd_t *)dma_alloc_coherent(dev->class_dev.dev, PAGE_SIZE, - &mem_addr, GFP_KERNEL); - - /* Set receive and transmit descriptor base. - */ - fep->rx_bd_base = cbd_base; - fep->tx_bd_base = cbd_base + RX_RING_SIZE; - - fep->skb_cur = fep->skb_dirty = 0; - - /* Initialize the receive buffer descriptors. - */ - bdp = fep->rx_bd_base; - k = 0; - for (i=0; i<FEC_ENET_RX_PAGES; i++) { - - /* Allocate a page. - */ - ba = (unsigned char *)dma_alloc_coherent(dev->class_dev.dev, - PAGE_SIZE, - &mem_addr, - GFP_KERNEL); - /* BUG: no check for failure */ - - /* Initialize the BD for every fragment in the page. - */ - for (j=0; j<FEC_ENET_RX_FRPPG; j++) { - bdp->cbd_sc = BD_ENET_RX_EMPTY; - bdp->cbd_bufaddr = mem_addr; - fep->rx_vaddr[k++] = ba; - mem_addr += FEC_ENET_RX_FRSIZE; - ba += FEC_ENET_RX_FRSIZE; - bdp++; - } - } - - /* Set the last buffer to wrap. - */ - bdp--; - bdp->cbd_sc |= BD_SC_WRAP; - -#ifdef CONFIG_FEC_PACKETHOOK - fep->ph_lock = 0; - fep->ph_rxhandler = fep->ph_txhandler = NULL; - fep->ph_proto = 0; - fep->ph_regaddr = NULL; - fep->ph_priv = NULL; -#endif - - /* Install our interrupt handler. - */ - if (request_irq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0) - panic("Could not allocate FEC IRQ!"); - -#ifdef CONFIG_RPXCLASSIC - /* Make Port C, bit 15 an input that causes interrupts. - */ - immap->im_ioport.iop_pcpar &= ~0x0001; - immap->im_ioport.iop_pcdir &= ~0x0001; - immap->im_ioport.iop_pcso &= ~0x0001; - immap->im_ioport.iop_pcint |= 0x0001; - cpm_install_handler(CPMVEC_PIO_PC15, mii_link_interrupt, dev); - - /* Make LEDS reflect Link status. - */ - *((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE; -#endif - -#ifdef PHY_INTERRUPT - ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |= - (0x80000000 >> PHY_INTERRUPT); - - if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0, "mii", dev) != 0) - panic("Could not allocate MII IRQ!"); -#endif - - dev->base_addr = (unsigned long)fecp; - - /* The FEC Ethernet specific entries in the device structure. */ - dev->open = fec_enet_open; - dev->hard_start_xmit = fec_enet_start_xmit; - dev->tx_timeout = fec_timeout; - dev->watchdog_timeo = TX_TIMEOUT; - dev->stop = fec_enet_close; - dev->get_stats = fec_enet_get_stats; - dev->set_multicast_list = set_multicast_list; - -#ifdef CONFIG_USE_MDIO - for (i=0; i<NMII-1; i++) - mii_cmds[i].mii_next = &mii_cmds[i+1]; - mii_free = mii_cmds; -#endif /* CONFIG_USE_MDIO */ - - /* Configure all of port D for MII. - */ - immap->im_ioport.iop_pdpar = 0x1fff; - - /* Bits moved from Rev. D onward. - */ - if ((mfspr(SPRN_IMMR) & 0xffff) < 0x0501) - immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */ - else - immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */ - -#ifdef CONFIG_USE_MDIO - /* Set MII speed to 2.5 MHz - */ - fecp->fec_mii_speed = fep->phy_speed = - (( (bd->bi_intfreq + 500000) / 2500000 / 2 ) & 0x3F ) << 1; -#else - fecp->fec_mii_speed = 0; /* turn off MDIO */ -#endif /* CONFIG_USE_MDIO */ - - err = register_netdev(dev); - if (err) { - free_netdev(dev); - return err; - } - - printk ("%s: FEC ENET Version 0.2, FEC irq %d" -#ifdef PHY_INTERRUPT - ", MII irq %d" -#endif - ", addr ", - dev->name, FEC_INTERRUPT -#ifdef PHY_INTERRUPT - , PHY_INTERRUPT -#endif - ); - for (i=0; i<6; i++) - printk("%02x%c", dev->dev_addr[i], (i==5) ? '\n' : ':'); - -#ifdef CONFIG_USE_MDIO /* start in full duplex mode, and negotiate speed */ - fec_restart (dev, 1); -#else /* always use half duplex mode only */ - fec_restart (dev, 0); -#endif - -#ifdef CONFIG_USE_MDIO - /* Queue up command to detect the PHY and initialize the - * remainder of the interface. - */ - fep->phy_id_done = 0; - fep->phy_addr = 0; - mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy); -#endif /* CONFIG_USE_MDIO */ - - return 0; -} -module_init(fec_enet_init); - -/* This function is called to start or restart the FEC during a link - * change. This only happens when switching between half and full - * duplex. - */ -static void -fec_restart(struct net_device *dev, int duplex) -{ - struct fec_enet_private *fep; - int i; - volatile cbd_t *bdp; - volatile immap_t *immap; - volatile fec_t *fecp; - - immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */ - - fecp = &(immap->im_cpm.cp_fec); - - fep = dev->priv; - - /* Whack a reset. We should wait for this. - */ - fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET; - for (i = 0; - (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); - ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printk ("FEC Reset timeout!\n"); - } - - /* Set station address. - */ - fecp->fec_addr_low = (my_enet_addr[0] << 16) | my_enet_addr[1]; - fecp->fec_addr_high = my_enet_addr[2]; - - /* Reset all multicast. - */ - fecp->fec_hash_table_high = 0; - fecp->fec_hash_table_low = 0; - - /* Set maximum receive buffer size. - */ - fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; - fecp->fec_r_hash = PKT_MAXBUF_SIZE; - - /* Set receive and transmit descriptor base. - */ - fecp->fec_r_des_start = iopa((uint)(fep->rx_bd_base)); - fecp->fec_x_des_start = iopa((uint)(fep->tx_bd_base)); - - fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; - fep->cur_rx = fep->rx_bd_base; - - /* Reset SKB transmit buffers. - */ - fep->skb_cur = fep->skb_dirty = 0; - for (i=0; i<=TX_RING_MOD_MASK; i++) { - if (fep->tx_skbuff[i] != NULL) { - dev_kfree_skb(fep->tx_skbuff[i]); - fep->tx_skbuff[i] = NULL; - } - } - - /* Initialize the receive buffer descriptors. - */ - bdp = fep->rx_bd_base; - for (i=0; i<RX_RING_SIZE; i++) { - - /* Initialize the BD for every fragment in the page. - */ - bdp->cbd_sc = BD_ENET_RX_EMPTY; - bdp++; - } - - /* Set the last buffer to wrap. - */ - bdp--; - bdp->cbd_sc |= BD_SC_WRAP; - - /* ...and the same for transmit. - */ - bdp = fep->tx_bd_base; - for (i=0; i<TX_RING_SIZE; i++) { - - /* Initialize the BD for every fragment in the page. - */ - bdp->cbd_sc = 0; - bdp->cbd_bufaddr = 0; - bdp++; - } - - /* Set the last buffer to wrap. - */ - bdp--; - bdp->cbd_sc |= BD_SC_WRAP; - - /* Enable MII mode. - */ - if (duplex) { - fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE; /* MII enable */ - fecp->fec_x_cntrl = FEC_TCNTRL_FDEN; /* FD enable */ - } - else { - fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT; - fecp->fec_x_cntrl = 0; - } - fep->full_duplex = duplex; - - /* Enable big endian and don't care about SDMA FC. - */ - fecp->fec_fun_code = 0x78000000; - -#ifdef CONFIG_USE_MDIO - /* Set MII speed. - */ - fecp->fec_mii_speed = fep->phy_speed; -#endif /* CONFIG_USE_MDIO */ - - /* Clear any outstanding interrupt. - */ - fecp->fec_ievent = 0xffc0; - - fecp->fec_ivec = (FEC_INTERRUPT/2) << 29; - - /* Enable interrupts we wish to service. - */ - fecp->fec_imask = ( FEC_ENET_TXF | FEC_ENET_TXB | - FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII ); - - /* And last, enable the transmit and receive processing. - */ - fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN; - fecp->fec_r_des_active = 0x01000000; -} - -static void -fec_stop(struct net_device *dev) -{ - volatile immap_t *immap; - volatile fec_t *fecp; - struct fec_enet_private *fep; - int i; - - immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */ - - fecp = &(immap->im_cpm.cp_fec); - - if ((fecp->fec_ecntrl & FEC_ECNTRL_ETHER_EN) == 0) - return; /* already down */ - - fep = dev->priv; - - - fecp->fec_x_cntrl = 0x01; /* Graceful transmit stop */ - - for (i = 0; - ((fecp->fec_ievent & 0x10000000) == 0) && (i < FEC_RESET_DELAY); - ++i) { - udelay(1); - } - if (i == FEC_RESET_DELAY) { - printk ("FEC timeout on graceful transmit stop\n"); - } - - /* Clear outstanding MII command interrupts. - */ - fecp->fec_ievent = FEC_ENET_MII; - - /* Enable MII command finished interrupt - */ - fecp->fec_ivec = (FEC_INTERRUPT/2) << 29; - fecp->fec_imask = FEC_ENET_MII; - -#ifdef CONFIG_USE_MDIO - /* Set MII speed. - */ - fecp->fec_mii_speed = fep->phy_speed; -#endif /* CONFIG_USE_MDIO */ - - /* Disable FEC - */ - fecp->fec_ecntrl &= ~(FEC_ECNTRL_ETHER_EN); -} |