diff options
Diffstat (limited to 'arch/powerpc/include')
| -rw-r--r-- | arch/powerpc/include/asm/dma-mapping.h | 24 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/epapr_hcalls.h | 7 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/exception-64s.h | 7 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/fsl_guts.h | 26 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/irq.h | 6 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/mpic.h | 18 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/mpic_msgr.h | 1 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/reg_booke.h | 5 |
8 files changed, 28 insertions, 66 deletions
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index dd70fac57ec8..62678e365ca0 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -22,9 +22,11 @@ /* Some dma direct funcs must be visible for use in other dma_ops */ extern void *dma_direct_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs); extern void dma_direct_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs); #ifdef CONFIG_NOT_COHERENT_CACHE @@ -130,23 +132,29 @@ static inline int dma_supported(struct device *dev, u64 mask) extern int dma_set_mask(struct device *dev, u64 dma_mask); -static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) +#define dma_alloc_coherent(d,s,h,f) dma_alloc_attrs(d,s,h,f,NULL) + +static inline void *dma_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) { struct dma_map_ops *dma_ops = get_dma_ops(dev); void *cpu_addr; BUG_ON(!dma_ops); - cpu_addr = dma_ops->alloc_coherent(dev, size, dma_handle, flag); + cpu_addr = dma_ops->alloc(dev, size, dma_handle, flag, attrs); debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr); return cpu_addr; } -static inline void dma_free_coherent(struct device *dev, size_t size, - void *cpu_addr, dma_addr_t dma_handle) +#define dma_free_coherent(d,s,c,h) dma_free_attrs(d,s,c,h,NULL) + +static inline void dma_free_attrs(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle, + struct dma_attrs *attrs) { struct dma_map_ops *dma_ops = get_dma_ops(dev); @@ -154,7 +162,7 @@ static inline void dma_free_coherent(struct device *dev, size_t size, debug_dma_free_coherent(dev, size, cpu_addr, dma_handle); - dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); + dma_ops->free(dev, size, cpu_addr, dma_handle, attrs); } static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h index f3b0c2cc9fea..976835d8f22e 100644 --- a/arch/powerpc/include/asm/epapr_hcalls.h +++ b/arch/powerpc/include/asm/epapr_hcalls.h @@ -134,10 +134,15 @@ * whether they will be clobbered. * * Note that r11 can be used as an output parameter. + * + * The "memory" clobber is only necessary for hcalls where the Hypervisor + * will read or write guest memory. However, we add it to all hcalls because + * the impact is minimal, and we want to ensure that it's present for the + * hcalls that need it. */ /* List of common clobbered registers. Do not use this macro. */ -#define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc" +#define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc", "memory" #define EV_HCALL_CLOBBERS8 EV_HCALL_CLOBBERS #define EV_HCALL_CLOBBERS7 EV_HCALL_CLOBBERS8, "r10" diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 548da3aa0a30..d58fc4e4149c 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -288,13 +288,6 @@ label##_hv: \ /* Exception addition: Hard disable interrupts */ #define DISABLE_INTS SOFT_DISABLE_INTS(r10,r11) -/* Exception addition: Keep interrupt state */ -#define ENABLE_INTS \ - ld r11,PACAKMSR(r13); \ - ld r12,_MSR(r1); \ - rlwimi r11,r12,0,MSR_EE; \ - mtmsrd r11,1 - #define ADD_NVGPRS \ bl .save_nvgprs diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h index ce04530d2000..aa4c488589ce 100644 --- a/arch/powerpc/include/asm/fsl_guts.h +++ b/arch/powerpc/include/asm/fsl_guts.h @@ -16,15 +16,6 @@ #define __ASM_POWERPC_FSL_GUTS_H__ #ifdef __KERNEL__ -/* - * These #ifdefs are safe because it's not possible to build a kernel that - * runs on e500 and e600 cores. - */ - -#if !defined(CONFIG_PPC_85xx) && !defined(CONFIG_PPC_86xx) -#error Only 85xx and 86xx SOCs are supported -#endif - /** * Global Utility Registers. * @@ -36,11 +27,7 @@ * different names. In these cases, one name is chosen to avoid extraneous * #ifdefs. */ -#ifdef CONFIG_PPC_85xx -struct ccsr_guts_85xx { -#else -struct ccsr_guts_86xx { -#endif +struct ccsr_guts { __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ @@ -77,11 +64,8 @@ struct ccsr_guts_86xx { u8 res0a8[0xb0 - 0xa8]; __be32 rstcr; /* 0x.00b0 - Reset Control Register */ u8 res0b4[0xc0 - 0xb4]; -#ifdef CONFIG_PPC_85xx - __be32 iovselsr; /* 0x.00c0 - I/O voltage select status register */ -#else - __be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */ -#endif + __be32 iovselsr; /* 0x.00c0 - I/O voltage select status register + Called 'elbcvselcr' on 86xx SOCs */ u8 res0c4[0x224 - 0xc4]; __be32 iodelay1; /* 0x.0224 - IO delay control register 1 */ __be32 iodelay2; /* 0x.0228 - IO delay control register 2 */ @@ -136,7 +120,7 @@ struct ccsr_guts_86xx { * ch: The channel on the DMA controller (0, 1, 2, or 3) * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx) */ -static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts, +static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts, unsigned int co, unsigned int ch, unsigned int device) { unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); @@ -172,7 +156,7 @@ static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts, * ch: The channel on the DMA controller (0, 1, 2, or 3) * value: the new value for the bit (0 or 1) */ -static inline void guts_set_pmuxcr_dma(struct ccsr_guts_86xx __iomem *guts, +static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts, unsigned int co, unsigned int ch, unsigned int value) { if ((ch == 0) || (ch == 3)) { diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index cf417e510736..0e40843a1c6e 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -18,10 +18,6 @@ #include <linux/atomic.h> -/* Define a way to iterate across irqs. */ -#define for_each_irq(i) \ - for ((i) = 0; (i) < NR_IRQS; ++(i)) - extern atomic_t ppc_n_lost_interrupts; /* This number is used when no interrupt has been assigned */ @@ -33,8 +29,6 @@ extern atomic_t ppc_n_lost_interrupts; /* Same thing, used by the generic IRQ code */ #define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS -struct irq_data; -extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d); extern irq_hw_number_t virq_to_hw(unsigned int virq); /** diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index c65b9294376e..c9f698a994be 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -275,9 +275,6 @@ struct mpic unsigned int isu_mask; /* Number of sources */ unsigned int num_sources; - /* default senses array */ - unsigned char *senses; - unsigned int senses_count; /* vector numbers used for internal sources (ipi/timers) */ unsigned int ipi_vecs[4]; @@ -415,21 +412,6 @@ extern struct mpic *mpic_alloc(struct device_node *node, extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, phys_addr_t phys_addr); -/* Set default sense codes - * - * @mpic: controller - * @senses: array of sense codes - * @count: size of above array - * - * Optionally provide an array (indexed on hardware interrupt numbers - * for this MPIC) of default sense codes for the chip. Those are linux - * sense codes IRQ_TYPE_* - * - * The driver gets ownership of the pointer, don't dispose of it or - * anything like that. __init only. - */ -extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count); - /* Initialize the controller. After this has been called, none of the above * should be called again for this mpic diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h index 3ec37dc9003e..326d33ca55cd 100644 --- a/arch/powerpc/include/asm/mpic_msgr.h +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -13,6 +13,7 @@ #include <linux/types.h> #include <linux/spinlock.h> +#include <asm/smp.h> struct mpic_msgr { u32 __iomem *base; diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index b86faa9107da..8a97aa7289d3 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -15,11 +15,6 @@ #ifndef __ASM_POWERPC_REG_BOOKE_H__ #define __ASM_POWERPC_REG_BOOKE_H__ -#ifdef CONFIG_BOOKE_WDT -extern u32 booke_wdt_enabled; -extern u32 booke_wdt_period; -#endif /* CONFIG_BOOKE_WDT */ - /* Machine State Register (MSR) Fields */ #define MSR_GS (1<<28) /* Guest state */ #define MSR_UCLE (1<<26) /* User-mode cache lock enable */ |