diff options
Diffstat (limited to 'arch/powerpc/boot/dts/katmai.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/katmai.dts | 210 |
1 files changed, 106 insertions, 104 deletions
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index cc2873a531d2..b94bf61b9bcc 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -12,12 +12,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,katmai"; compatible = "amcc,katmai"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -33,13 +35,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440SPe"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -47,14 +49,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440spe","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -64,11 +66,11 @@ compatible = "ibm,uic-440spe","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -76,11 +78,11 @@ compatible = "ibm,uic-440spe","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <a 4 b 4>; /* cascade */ + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -88,22 +90,22 @@ compatible = "ibm,uic-440spe","ibm,uic"; interrupt-controller; cell-index = <3>; - dcr-reg = <0f0 009>; + dcr-reg = <0x0f0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <10 4 11 4>; /* cascade */ + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440spe"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440spe"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -115,108 +117,108 @@ SDRAM0: sdram { compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <1>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0 &UIC1 6 4 - /*RXEOB*/ 1 &UIC1 7 4 - /*SERR*/ 2 &UIC1 1 4 - /*TXDE*/ 3 &UIC1 2 4 - /*RXDE*/ 4 &UIC1 3 4>; + interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4 + /*RXEOB*/ 0x1 &UIC1 0x7 0x4 + /*SERR*/ 0x2 &UIC1 0x1 0x4 + /*TXDE*/ 0x3 &UIC1 0x2 0x4 + /*RXDE*/ 0x4 &UIC1 0x3 0x4>; }; POB0: opb { compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 4 e0000000 20000000>; + ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; }; UART0: serial@10000200 { device_type = "serial"; compatible = "ns16550"; - reg = <10000200 8>; - virtual-reg = <a0000200>; + reg = <0x10000200 0x00000008>; + virtual-reg = <0xa0000200>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@10000300 { device_type = "serial"; compatible = "ns16550"; - reg = <10000300 8>; - virtual-reg = <a0000300>; + reg = <0x10000300 0x00000008>; + virtual-reg = <0xa0000300>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@10000600 { device_type = "serial"; compatible = "ns16550"; - reg = <10000600 8>; - virtual-reg = <a0000600>; + reg = <0x10000600 0x00000008>; + virtual-reg = <0xa0000600>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC1>; - interrupts = <5 4>; + interrupts = <0x5 0x4>; }; IIC0: i2c@10000400 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; - reg = <10000400 14>; + reg = <0x10000400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@10000500 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; - reg = <10000500 14>; + reg = <0x10000500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; EMAC0: ethernet@10000800 { - linux,network-index = <0>; + linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-440spe", "ibm,emac4"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = <10000800 70>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0x10000800 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "gmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; has-inverted-stacr-oc; has-new-stacr-staopc; }; @@ -231,23 +233,23 @@ primary; large-inbound-windows; enable-msi-hole; - reg = <c 0ec00000 8 /* Config space access */ - 0 0 0 /* no IACK cycles */ - c 0ed00000 4 /* Special cycles */ - c 0ec80000 100 /* Internal registers */ - c 0ec80100 fc>; /* Internal messaging registers */ + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 - 01000000 0 00000000 0000000c 08000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0 to 0xf */ - bus-range = <0 f>; + bus-range = <0x0 0xf>; /* * On Katmai, the following PCI-X interrupts signals @@ -258,13 +260,13 @@ * INTC: J2: 1-2 * INTD: J1: 1-2 */ - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 1 &UIC1 14 8 - 0800 0 0 2 &UIC1 13 8 - 0800 0 0 3 &UIC1 12 8 - 0800 0 0 4 &UIC1 11 8 + 0x800 0x0 0x0 0x1 &UIC1 0x14 0x8 + 0x800 0x0 0x0 0x2 &UIC1 0x13 0x8 + 0x800 0x0 0x0 0x3 &UIC1 0x12 0x8 + 0x800 0x0 0x0 0x4 &UIC1 0x11 0x8 >; }; @@ -275,23 +277,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = <d 00000000 20000000 /* Config space access */ - c 10000000 00001000>; /* Registers */ - dcr-reg = <100 020>; - sdr-base = <300>; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x10000000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 - 01000000 0 00000000 0000000f 80000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 10 to 0x1f */ - bus-range = <10 1f>; + bus-range = <0x10 0x1f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -301,12 +303,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 0 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 1 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 2 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 3 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; }; PCIE1: pciex@d20000000 { @@ -316,23 +318,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; primary; - port = <1>; /* port number */ - reg = <d 20000000 20000000 /* Config space access */ - c 10001000 00001000>; /* Registers */ - dcr-reg = <120 020>; - sdr-base = <340>; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x10001000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 - 01000000 0 00000000 0000000f 80010000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 10 to 0x1f */ - bus-range = <20 2f>; + bus-range = <0x20 0x2f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -342,12 +344,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 4 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 5 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 6 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 7 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; }; PCIE2: pciex@d40000000 { @@ -357,23 +359,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; primary; - port = <2>; /* port number */ - reg = <d 40000000 20000000 /* Config space access */ - c 10002000 00001000>; /* Registers */ - dcr-reg = <140 020>; - sdr-base = <370>; + port = <0x2>; /* port number */ + reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */ + 0x0000000c 0x10002000 0x00001000>; /* Registers */ + dcr-reg = <0x140 0x020>; + sdr-base = <0x370>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000f 00000000 0 80000000 - 01000000 0 00000000 0000000f 80020000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 10 to 0x1f */ - bus-range = <30 3f>; + bus-range = <0x30 0x3f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -383,12 +385,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 8 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 9 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 a 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 b 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; }; }; |