diff options
Diffstat (limited to 'arch/arm')
553 files changed, 16797 insertions, 5568 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 01d178a2009f..011808490fed 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -48,11 +48,13 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-kizbox2.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ + at91-tse850-3.dtb \ sama5d31ek.dtb \ sama5d33ek.dtb \ sama5d34ek.dtb \ sama5d35ek.dtb \ sama5d36ek.dtb \ + sama5d36ek_cmp.dtb \ at91-sama5d4_ma5d4evk.dtb \ at91-sama5d4_xplained.dtb \ at91-sama5d4ek.dtb \ @@ -83,6 +85,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47081-asus-rt-n18u.dtb \ bcm47081-buffalo-wzr-600dhp2.dtb \ bcm47081-buffalo-wzr-900dhp.dtb \ + bcm47081-luxul-xap-1410.dtb \ + bcm47081-luxul-xwr-1200.dtb \ bcm4709-asus-rt-ac87u.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-netgear-r7000.dtb \ @@ -128,7 +132,8 @@ dtb-$(CONFIG_ARCH_CLPS711X) += \ dtb-$(CONFIG_ARCH_DAVINCI) += \ da850-lcdk.dtb \ da850-enbw-cmc.dtb \ - da850-evm.dtb + da850-evm.dtb \ + da850-lego-ev3.dtb dtb-$(CONFIG_ARCH_DIGICOLOR) += \ cx92755_equinox.dtb dtb-$(CONFIG_ARCH_EFM32) += \ @@ -349,6 +354,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw553x.dtb \ imx6dl-hummingboard.dtb \ imx6dl-icore.dtb \ + imx6dl-icore-rqs.dtb \ imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ @@ -357,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ + imx6dl-savageboard.dtb \ imx6dl-ts4900.dtb \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6s-8034.dtb \ @@ -393,6 +400,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-icore.dtb \ imx6q-icore-rqs.dtb \ imx6q-marsboard.dtb \ + imx6q-mccmon6.dtb \ imx6q-nitrogen6x.dtb \ imx6q-nitrogen6_max.dtb \ imx6q-nitrogen6_som2.dtb \ @@ -402,6 +410,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ + imx6q-savageboard.dtb \ imx6q-sbc6x.dtb \ imx6q-tbs2910.dtb \ imx6q-ts4900.dtb \ @@ -434,7 +443,10 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ imx6ul-geam-kit.dtb \ + imx6ul-isiot-emmc.dtb \ + imx6ul-isiot-nand.dtb \ imx6ul-liteboard.dtb \ + imx6ul-opos6uldev.dtb \ imx6ul-pico-hobbit.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ @@ -458,7 +470,8 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-cosmic.dtb \ vf610m4-cosmic.dtb \ vf610-twr.dtb \ - vf610-zii-dev-rev-b.dtb + vf610-zii-dev-rev-b.dtb \ + vf610-zii-dev-rev-c.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ imx23-olinuxino.dtb \ @@ -564,7 +577,9 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-boneblack-wireless.dtb \ am335x-bonegreen.dtb \ + am335x-bonegreen-wireless.dtb \ am335x-chiliboard.dtb \ am335x-cm-t335.dtb \ am335x-evm.dtb \ @@ -573,6 +588,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-lxm.dtb \ am335x-nano.dtb \ am335x-pepper.dtb \ + am335x-phycore-rdk.dtb \ am335x-shc.dtb \ am335x-sbc-t335.dtb \ am335x-sl50.dtb \ @@ -718,6 +734,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ + socfpga_arria10_socdk_nand.dtb \ socfpga_arria10_socdk_qspi.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ socfpga_cyclone5_mcvevk.dtb \ @@ -782,6 +799,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-empire-electronix-m712.dtb \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-inet-98v-rev2.dtb \ + sun5i-a13-licheepi-one.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ sun5i-a13-q8-tablet.dtb \ @@ -845,7 +863,9 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-sinlinx-sina33.dtb \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-a83t-cubietruck-plus.dtb \ + sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ + sun8i-h3-beelink-x2.dtb \ sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-neo.dtb \ sun8i-h3-orangepi-2.dtb \ @@ -855,7 +875,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-pc-plus.dtb \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ - sun8i-r16-parrot.dtb + sun8i-r16-parrot.dtb \ + sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb @@ -951,6 +972,8 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-385-linksys-cobra.dtb \ armada-385-turris-omnia.dtb \ armada-388-clearfog.dtb \ + armada-388-clearfog-base.dtb \ + armada-388-clearfog-pro.dtb \ armada-388-db.dtb \ armada-388-gp.dtb \ armada-388-rd.dtb @@ -959,6 +982,8 @@ dtb-$(CONFIG_MACH_ARMADA_39X) += \ dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ + armada-xp-db-dxbc2.dtb \ + armada-xp-db-xc3-24g4xg.dtb \ armada-xp-gp.dtb \ armada-xp-lenovo-ix4-300d.dtb \ armada-xp-linksys-mamba.dtb \ @@ -983,6 +1008,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \ + aspeed-bmc-opp-romulus.dtb \ aspeed-ast2500-evb.dtb endif diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi index db8752fc480e..d0eefc3b886c 100644 --- a/arch/arm/boot/dts/alpine.dtsi +++ b/arch/arm/boot/dts/alpine.dtsi @@ -93,7 +93,7 @@ interrupt-controller; reg = <0x0 0xfb001000 0x0 0x1000>, <0x0 0xfb002000 0x0 0x2000>, - <0x0 0xfb004000 0x0 0x1000>, + <0x0 0xfb004000 0x0 0x2000>, <0x0 0xfb006000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 3e32dd18fd25..bf6b26abe35b 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -207,6 +207,8 @@ &usb0 { status = "okay"; dr_mode = "peripheral"; + interrupts-extended = <&intc 18 &tps 0>; + interrupt-names = "mc", "vbus"; }; &usb1 { diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi new file mode 100644 index 000000000000..325daae40278 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/display/tda998x.h> + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; + + /* If you want to get 24 bit RGB and 16 BGR mode instead of + * current 16 bit RGB and 24 BGR modes, set the propety + * below to "crossed" and uncomment the video-ports -property + * in tda19988 node. + */ + blue-and-red-wiring = "straight"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988: tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ + /* video-ports = <0x234501>; */ + + #sound-dai-cells = <0>; + audio-ports = < TDA998x_I2S 0x03>; + + ports { + port@0 { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + }; +}; + +&rtc { + system-power-controller; +}; + +&mcasp0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +/ { + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "TI BeagleBone Black"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&mcasp0>; + clocks = <&clk_mcasp0>; + }; + + simple-audio-card,codec { + sound-dai = <&tda19988>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts new file mode 100644 index 000000000000..105bd10655f7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-boneblack-common.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "TI AM335x BeagleBone Black Wireless"; + compatible = "ti,am335x-bone-black-wireless", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us= <70000>; + + /* WL_EN */ + gpio = <&gpio3 9 0>; + enable-active-high; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_txd0.gpio0_28 - BT_EN */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */ + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */ + AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */ + AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ + AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */ + AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */ + >; + }; + + wl18xx_pins: pinmux_wl18xx_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gmii1_txclk.gpio3_9 WL_EN */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk.gpio0_29 WL_IRQ */ + AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_rxclk.gpio3_10 LS_BUF_EN */ + >; + }; +}; + +&mac { + status = "disabled"; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + ti,needs-special-hs-handling; + keep-power-in-suspend; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wl18xx_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins &bt_pins>; + status = "okay"; +}; + +&gpio3 { + ls_buf_en { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index db00d8ef7b19..77273df1a028 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -9,162 +9,9 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" -#include <dt-bindings/display/tda998x.h> +#include "am335x-boneblack-common.dtsi" / { model = "TI AM335x BeagleBone Black"; compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; }; - -&ldo3_reg { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; -}; - -&mmc1 { - vmmc-supply = <&vmmcsd_fixed>; -}; - -&mmc2 { - vmmc-supply = <&vmmcsd_fixed>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_pins>; - bus-width = <8>; - status = "okay"; -}; - -&am33xx_pinmux { - nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ - >; - }; - nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - >; - }; - - mcasp0_pins: mcasp0_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ - AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ - >; - }; -}; - -&lcdc { - status = "okay"; - - /* If you want to get 24 bit RGB and 16 BGR mode instead of - * current 16 bit RGB and 24 BGR modes, set the propety - * below to "crossed" and uncomment the video-ports -property - * in tda19988 node. - */ - blue-and-red-wiring = "straight"; - - port { - lcdc_0: endpoint@0 { - remote-endpoint = <&hdmi_0>; - }; - }; -}; - -&i2c0 { - tda19988: tda19988 { - compatible = "nxp,tda998x"; - reg = <0x70>; - - pinctrl-names = "default", "off"; - pinctrl-0 = <&nxp_hdmi_bonelt_pins>; - pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; - - /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ - /* video-ports = <0x234501>; */ - - #sound-dai-cells = <0>; - audio-ports = < TDA998x_I2S 0x03>; - - ports { - port@0 { - hdmi_0: endpoint@0 { - remote-endpoint = <&lcdc_0>; - }; - }; - }; - }; -}; - -&rtc { - system-power-controller; -}; - -&mcasp0 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mcasp0_pins>; - status = "okay"; - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 0 0 1 0 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; -}; - -/ { - clk_mcasp0_fixed: clk_mcasp0_fixed { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24576000>; - }; - - clk_mcasp0: clk_mcasp0 { - #clock-cells = <0>; - compatible = "gpio-gate-clock"; - clocks = <&clk_mcasp0_fixed>; - enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "TI BeagleBone Black"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink0_master>; - simple-audio-card,frame-master = <&dailink0_master>; - - dailink0_master: simple-audio-card,cpu { - sound-dai = <&mcasp0>; - clocks = <&clk_mcasp0>; - }; - - simple-audio-card,codec { - sound-dai = <&tda19988>; - }; - }; -}; diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi new file mode 100644 index 000000000000..853e6d3a028d --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + uart2_pins: uart2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ + AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts new file mode 100644 index 000000000000..9d1a0fd555f3 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-common.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "TI AM335x BeagleBone Green Wireless"; + compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us= <70000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ + AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ + AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ + AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ + AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */ + AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */ + >; + }; + + wl18xx_pins: pinmux_wl18xx_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x828, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN */ + AM33XX_IOPAD(0x82C, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ */ + AM33XX_IOPAD(0x87C, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 LS_BUF_EN */ + >; + }; +}; + +&mac { + status = "disabled"; +}; + +&mmc3 { + dmas = <&edma_xbar 12 0 1 + &edma_xbar 13 0 2>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + ti,needs-special-hs-handling; + keep-power-in-suspend; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wl18xx_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins &bt_pins>; + status = "okay"; +}; + +&gpio1 { + ls_buf_en { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LS_BUF_EN"; + }; +}; + +/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/ +/* in case it isn't, wilink8 ends up in one of the test modes that */ +/* intruces various issues (elp wkaeup timeouts etc.) */ +/* On the BBGW this pin is routed through the level shifter (U21) that */ +/* introduces a pullup on the line and wilink8 ends up in a bad state. */ +/* use a gpio hog to force this pin low. An alternative may be adding */ +/* an external pulldown on U21 pin 4. */ + +&gpio3 { + bt_aud_in { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "MCASP0_AHCLKR"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts index dce3c8657e04..a8b4d969ce2a 100644 --- a/arch/arm/boot/dts/am335x-bonegreen.dts +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -9,45 +9,9 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-common.dtsi" / { model = "TI AM335x BeagleBone Green"; compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; }; - -&ldo3_reg { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; -}; - -&mmc1 { - vmmc-supply = <&vmmcsd_fixed>; -}; - -&mmc2 { - vmmc-supply = <&vmmcsd_fixed>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_pins>; - bus-width = <8>; - status = "okay"; -}; - -&am33xx_pinmux { - uart2_pins: uart2_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ - >; - }; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "okay"; -}; - -&rtc { - system-power-controller; -}; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index 2a624b3c9258..d8769799772e 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -185,3 +185,19 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; + +&tps { + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + charger { + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; + status = "okay"; + }; + + pwrbutton { + interrupts = <2>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index f9ee5859c154..1b43ebd08b38 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -124,6 +124,14 @@ &rtc { system-power-controller; + + pinctrl-0 = <&ext_wakeup>; + pinctrl-names = "default"; + + ext_wakeup: ext-wakeup { + pins = "ext_wakeup0"; + input-enable; + }; }; /* NAND Flash */ diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index c2186ec2834b..1c37a7c1ea17 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -25,6 +25,10 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + chosen { + stdout-path = &uart0; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index e2548d1ce753..9e43c443738a 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -32,6 +32,10 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + chosen { + stdout-path = &uart0; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 8ed46f9d79b7..a2ad076822db 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -24,6 +24,10 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + chosen { + stdout-path = &uart3; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 483d585c8908..807494bc722b 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -249,7 +249,8 @@ #address-cells = <2>; #size-cells = <1>; - ranges = <0 0 0x08000000 0x08000000>; /* CS0: NOR 128M */ + ranges = <0 0 0x08000000 0x08000000>, /* CS0: NOR 128M */ + <1 0 0x1c000000 0x01000000>; /* CS1: FRAM 16M */ nor@0,0 { reg = <0 0x00000000 0x08000000>; @@ -342,6 +343,34 @@ reg = <0x04000000 0x04000000>; /* 64MB */ }; }; + + fram@1,0 { + reg = <1 0x00000000 0x01000000>; + bank-width = <2>; + + gpmc,mux-add-data = <2>; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <160>; + gpmc,cs-wr-off-ns = <160>; + gpmc,adv-on-ns = <10>; + gpmc,adv-rd-off-ns = <20>; + gpmc,adv-wr-off-ns = <20>; + gpmc,oe-on-ns = <30>; + gpmc,oe-off-ns = <150>; + gpmc,we-on-ns = <30>; + gpmc,we-off-ns = <150>; + gpmc,rd-cycle-ns = <160>; + gpmc,wr-cycle-ns = <160>; + gpmc,access-ns = <130>; + gpmc,page-burst-access-ns = <10>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + gpmc,cycle2cycle-delay-ns = <10>; + gpmc,wr-data-mux-bus-ns = <30>; + gpmc,wr-access-ns = <0>; + }; }; &mac { diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi new file mode 100644 index 000000000000..02981eae96b9 --- /dev/null +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -0,0 +1,288 @@ +/* + * Copyright (C) 2014-2017 Phytec Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * Teresa Remmet <t.remmet@phytec.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + model = "Phytec AM335x PCM-953"; + compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"; + + /* Power */ + regulators { + vcc3v3: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + vcc1v8: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + }; + + /* User IO */ + user_leds: user_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_pins>; + + green { + label = "green:user"; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + + yellow { + label = "yellow:user"; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "gpio"; + default-state = "on"; + }; + }; + + user_buttons: user_buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&user_buttons_pins>; + + button@0 { + label = "home"; + linux,code = <KEY_HOME>; + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + gpio-key,wakeup; + }; + + button@1 { + label = "menu"; + linux,code = <KEY_MENU>; + gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; + gpio-key,wakeup; + }; + + }; +}; + +&am33xx_pinmux { + user_buttons_pins: pinmux_user_buttons { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* emu0.gpio3_7 */ + AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* emu1.gpio3_8 */ + >; + }; + + user_leds_pins: pinmux_user_leds { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */ + AM33XX_IOPAD(0x884, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */ + >; + }; +}; + +/* CAN */ +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ + AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +/* Ethernet */ +&am33xx_pinmux { + ethernet1_pins: pinmux_ethernet1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + >; + }; +}; + +&cpsw_emac1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; + status = "okay"; +}; + +&davinci_mdio { + phy1: ethernet-phy@2 { + reg = <2>; + + /* Register 260 (104h) – RGMII Clock and Control Pad Skew */ + rxc-skew-ps = <1400>; + rxdv-skew-ps = <0>; + txc-skew-ps = <1400>; + txen-skew-ps = <0>; + /* Register 261 (105h) – RGMII RX Data Pad Skew */ + rxd3-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd0-skew-ps = <0>; + /* Register 262 (106h) – RGMII TX Data Pad Skew */ + txd3-skew-ps = <0>; + txd2-skew-ps = <0>; + txd1-skew-ps = <0>; + txd0-skew-ps = <0>; + }; +}; + +&mac { + slaves = <2>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_pins ðernet1_pins>; + dual_emac; +}; + +/* Misc */ +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&cb_gpio_pins>; + + cb_gpio_pins: pinmux_cb_gpio { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart0_ctsn.gpio1_8 */ + AM33XX_IOPAD(0x96c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ + >; + }; +}; + +/* MMC */ +&am33xx_pinmux { + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&vcc3v3>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* UARTs */ +&am33xx_pinmux { + uart0_pins: pinmux_uart0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + >; + }; + + uart2_pins: pinmux_uart2 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ + AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_rx_clk.uart2_txd */ + >; + }; + + uart3_pins: pinmux_uart3 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd3.uart3_rxd */ + AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd2.uart3_txd */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +/* USB */ +&cppi41dma { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-phycore-rdk.dts b/arch/arm/boot/dts/am335x-phycore-rdk.dts new file mode 100644 index 000000000000..305f0b35d6ea --- /dev/null +++ b/arch/arm/boot/dts/am335x-phycore-rdk.dts @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2014 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am335x-phycore-som.dtsi" +#include "am335x-pcm-953.dtsi" + +/* SoM */ +&i2c_eeprom { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&serial_flash { + status = "okay"; + +}; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 75e24add3f13..14533ff6d0ad 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -78,7 +78,7 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&phy0>; phy-mode = "rmii"; dual_emac_res_vlan = <1>; }; @@ -87,6 +87,10 @@ pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; }; &mac { @@ -120,6 +124,12 @@ reg = <0x2d>; }; + i2c_tmp102: temp@4b { + compatible = "ti,tmp102"; + reg = <0x4b>; + status = "disabled"; + }; + i2c_eeprom: eeprom@52 { compatible = "atmel,24c32"; pagesize = <32>; @@ -201,43 +211,6 @@ #address-cells = <1>; #size-cells = <1>; - - partition@0 { - label = "xload"; - reg = <0x0 0x20000>; - }; - partition@1 { - label = "xload_backup1"; - reg = <0x20000 0x20000>; - }; - partition@2 { - label = "xload_backup2"; - reg = <0x40000 0x20000>; - }; - partition@3 { - label = "xload_backup3"; - reg = <0x60000 0x20000>; - }; - partition@4 { - label = "barebox"; - reg = <0x80000 0x80000>; - }; - partition@5 { - label = "bareboxenv"; - reg = <0x100000 0x40000>; - }; - partition@6 { - label = "oftree"; - reg = <0x140000 0x40000>; - }; - partition@7 { - label = "kernel"; - reg = <0x180000 0x800000>; - }; - partition@8 { - label = "root"; - reg = <0x980000 0x0>; - }; }; }; @@ -341,33 +314,12 @@ status = "okay"; serial_flash: m25p80@0 { - compatible = "m25p80"; + compatible = "jedec,spi-nor"; spi-max-frequency = <48000000>; reg = <0x0>; m25p,fast-read; status = "disabled"; #address-cells = <1>; #size-cells = <1>; - - partition@0 { - label = "xload"; - reg = <0x0 0x20000>; - }; - partition@1 { - label = "barebox"; - reg = <0x20000 0x80000>; - }; - partition@2 { - label = "bareboxenv"; - reg = <0xa0000 0x20000>; - }; - partition@3 { - label = "oftree"; - reg = <0xc0000 0x20000>; - }; - partition@4 { - label = "kernel"; - reg = <0xe0000 0x0>; - }; }; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index b0dfa6f14cd5..c5d2589c55fc 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -136,6 +136,13 @@ >; }; + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; + uart4_pins: pinmux_uart4_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ @@ -150,13 +157,6 @@ >; }; - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rxd.i2c1_sda */ - AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_txdi2c1_scl */ - >; - }; - i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ @@ -262,6 +262,16 @@ >; }; + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MOSI - spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MISO - spi0_d1.spi0_d1 */ + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CLK - spi0_clk.spi0_clk */ + AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS0 (NBATTSS) - spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS1 (FPGA_FLASH_NCS) - spi0_cs1.spi0_cs1 */ + >; + }; + lwb_pins: pinmux_lwb_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) /* SoundPA_en - mcasp0_fsr.gpio3_19 */ @@ -292,16 +302,22 @@ reg = <0x24>; }; + bq32000: rtc@68 { + compatible = "ti,bq32000"; + trickle-resistor-ohms = <1120>; + reg = <0x68>; + }; + eeprom: eeprom@50 { compatible = "at,24c256"; reg = <0x50>; }; -}; -&i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; + gpio_exp: mcp23017@20 { + compatible = "microchip,mcp23017"; + reg = <0x20>; + }; + }; &i2c2 { @@ -321,6 +337,16 @@ DRVDD-supply = <&ldo4_reg>; DVDD-supply = <&ldo3_reg>; }; + + /* Ambient Light Sensor */ + als: isl29023@44 { + compatible = "isil,isl29023"; + reg = <0x44>; + }; +}; + +&rtc { + status = "disabled"; }; &usb { @@ -394,12 +420,32 @@ pinctrl-0 = <&uart0_pins>; }; +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + &uart4 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; }; +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + + flash: n25q032@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q032"; + reg = <1>; + spi-max-frequency = <5000000>; + }; +}; + #include "tps65217.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 02c67365c4e1..8ce541739b24 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -119,11 +119,17 @@ }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&phy1>; phy-mode = "mii"; dual_emac_res_vlan = <2>; }; +&davinci_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mac { slaves = <2>; pinctrl-names = "default"; @@ -206,7 +212,6 @@ }; &usb0 { - dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 957840cc7b78..a4f31739057f 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -23,6 +23,10 @@ display0 = &lcd0; }; + chosen { + stdout-path = &uart0; + }; + evm_v3_3d: fixedregulator-v3_3d { compatible = "regulator-fixed"; regulator-name = "evm_v3_3d"; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index b76a7c0264a5..c1f7f9336e64 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -18,6 +18,10 @@ model = "TI AM437x Industrial Development Kit"; compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43"; + chosen { + stdout-path = &uart0; + }; + v24_0d: fixed-regulator-v24_0d { compatible = "regulator-fixed"; regulator-name = "V24_0D"; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 319d94205350..4dc54bee2f36 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -24,6 +24,10 @@ display0 = &lcd0; }; + chosen { + stdout-path = &uart0; + }; + /* fixed 32k external oscillator clock */ clk_32k_rtc: clk_32k_rtc { #clock-cells = <0>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 9d35c3f07cad..9acd4ccdec4e 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -24,6 +24,10 @@ display0 = &lcd0; }; + chosen { + stdout-path = &uart0; + }; + vmmcsd_fixed: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 78bee26361f1..585d792a8fdd 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -22,6 +22,10 @@ display0 = &hdmi0; }; + chosen { + stdout-path = &uart3; + }; + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; @@ -421,19 +425,29 @@ <&dra7_pmx_core 0x3f8>; }; +&davinci_mdio { + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@2 { + reg = <2>; + }; +}; + &mac { status = "okay"; dual_emac; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&phy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&phy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts index ca85570629fd..39a92aff0a0d 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts @@ -22,3 +22,8 @@ vmmc-supply = <&vdd_3v3>; vmmc-aux-supply = <&ldo1_reg>; }; + +/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */ +&phy1 { + max-speed = <100>; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 8c66f2efd283..19a60a11c198 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -22,3 +22,8 @@ &mmc1 { vmmc-supply = <&ldo1_reg>; }; + +/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */ +&phy1 { + max-speed = <100>; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 814a720d5c3d..0d341c545b01 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -14,6 +14,10 @@ rtc1 = &rtc; }; + chosen { + stdout-path = &uart3; + }; + vmain: fixedregulator-vmain { compatible = "regulator-fixed"; regulator-name = "VMAIN"; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index a9419f8e17e8..c4eef7323367 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts index aeedc463daa6..db7f3aa38670 100644 --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index a1425409e570..702f58c9642d 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 6bd9265f1062..b1a96e95e921 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index c84ab5bf1e18..d67e7aa42b54 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index c3fd6e49212f..8b2fa9a49967 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -173,6 +173,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -235,6 +237,48 @@ phy0: ethernet-phy@0 { reg = <0>; }; + + switch: switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 99f9de229ea8..4978011df5bd 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index b0520bdeea27..09495e87b038 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index b704bcc597f7..cc011c8bc36b 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index ef45cbeb3e7d..bcdbb8ba1d65 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index f515591e8733..50c5e8417802 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index 5102d19cc8f4..e392f6036f39 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 8f0e508f64ae..df47bf1ea5eb 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -103,8 +103,56 @@ }; }; - mdio { + mdio@72004 { status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; sata@a8000 { @@ -261,6 +309,8 @@ }; dsa@0 { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index ab49acb2d452..28eede180e4f 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -122,7 +122,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ge0_rgmii_pins>; status = "okay"; - phy-mode = "rgmii-id"; + phy-mode = "rgmii"; fixed-link { speed = <1000>; @@ -135,7 +135,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ge1_rgmii_pins>; status = "okay"; - phy-mode = "rgmii-id"; + phy-mode = "rgmii"; fixed-link { speed = <1000>; @@ -273,7 +273,59 @@ /* irq is connected to &pcawan pin 7 */ }; - /* Switch MV88E7176 at address 0x10 */ + /* Switch MV88E6176 at address 0x10 */ + switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + dsa,member = <0 0>; + + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + ports@0 { + reg = <0>; + label = "lan0"; + }; + + ports@1 { + reg = <1>; + label = "lan1"; + }; + + ports@2 { + reg = <2>; + label = "lan2"; + }; + + ports@3 { + reg = <3>; + label = "lan3"; + }; + + ports@4 { + reg = <4>; + label = "lan4"; + }; + + ports@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð1>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + /* port 6 is connected to eth0 */ + }; + }; }; &pinctrl { diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index 8e67d2c083dd..8e63be33472e 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts new file mode 100644 index 000000000000..22ed07fc2979 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts @@ -0,0 +1,109 @@ +/* + * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828) + * + * Copyright (C) 2015 Russell King + * + * This board is in development; the contents of this file work with + * the A1 rev 2.0 of the board, which does not represent final + * production board. Things will change, don't expect this file to + * remain compatible info the future. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-388-clearfog.dtsi" + +/ { + model = "SolidRun Clearfog Base A1"; + compatible = "solidrun,clearfog-base-a1", + "solidrun,clearfog-a1", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&rear_button_pins>; + pinctrl-names = "default"; + + button_0 { + /* The rear SW3 button */ + label = "Rear Button"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_0>; + }; + }; +}; + +ð1 { + phy = <&phy1>; +}; + +&gpio0 { + phy1_reset { + gpio-hog; + gpios = <19 GPIO_ACTIVE_LOW>; + output-low; + line-name = "phy1-reset"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins µsom_phy_clk_pins &clearfog_phy_pins>; + phy1: ethernet-phy@1 { + /* + * Annoyingly, the marvell phy driver configures the LED + * register, rather than preserving reset-loaded setting. + * We undo that rubbish here. + */ + marvell,reg-init = <3 16 0 0x101e>; + reg = <1>; + }; +}; + +&pinctrl { + /* phy1 reset */ + clearfog_phy_pins: clearfog-phy-pins { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; + rear_button_pins: rear-button-pins { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/armada-388-clearfog-pro.dts new file mode 100644 index 000000000000..bd85870bbdbb --- /dev/null +++ b/arch/arm/boot/dts/armada-388-clearfog-pro.dts @@ -0,0 +1,55 @@ +/* + * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) + * + * Copyright (C) 2015 Russell King + * + * This board is in development; the contents of this file work with + * the A1 rev 2.0 of the board, which does not represent final + * production board. Things will change, don't expect this file to + * remain compatible info the future. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "armada-388-clearfog.dts" + +/ { + model = "SolidRun Clearfog Pro A1"; + compatible = "solidrun,clearfog-pro-a1", + "solidrun,clearfog-a1", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 71ce201c903e..2745b7416313 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -1,5 +1,5 @@ /* - * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828) + * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) * * Copyright (C) 2015 Russell King * @@ -17,17 +17,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,312 +36,33 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "armada-388.dtsi" -#include "armada-38x-solidrun-microsom.dtsi" +#include "armada-388-clearfog.dtsi" / { model = "SolidRun Clearfog A1"; compatible = "solidrun,clearfog-a1", "marvell,armada388", "marvell,armada385", "marvell,armada380"; - aliases { - /* So that mvebu u-boot can update the MAC addresses */ - ethernet1 = ð0; - ethernet2 = ð1; - ethernet3 = ð2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - soc { internal-regs { - ethernet@30000 { - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <1>; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - ethernet@34000 { - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <3>; - bm,pool-short = <1>; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - i2c@11000 { - /* Is there anything on this? */ - clock-frequency = <100000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; - - /* - * PCA9655 GPIO expander, up to 1MHz clock. - * 0-CON3 CLKREQ# - * 1-CON3 PERST# - * 2-CON2 PERST# - * 3-CON3 W_DISABLE - * 4-CON2 CLKREQ# - * 5-USB3 overcurrent - * 6-USB3 power - * 7-CON2 W_DISABLE - * 8-JP4 P1 - * 9-JP4 P4 - * 10-JP4 P5 - * 11-m.2 DEVSLP - * 12-SFP_LOS - * 13-SFP_TX_FAULT - * 14-SFP_TX_DISABLE - * 15-SFP_MOD_DEF0 - */ - expander0: gpio-expander@20 { - /* - * This is how it should be: - * compatible = "onnn,pca9655", - * "nxp,pca9555"; - * but you can't do this because of - * the way I2C works. - */ - compatible = "nxp,pca9555"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x20>; - - pcie1_0_clkreq { - gpio-hog; - gpios = <0 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie1.0-clkreq"; - }; - pcie1_0_w_disable { - gpio-hog; - gpios = <3 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie1.0-w-disable"; - }; - pcie2_0_clkreq { - gpio-hog; - gpios = <4 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie2.0-clkreq"; - }; - pcie2_0_w_disable { - gpio-hog; - gpios = <7 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie2.0-w-disable"; - }; - usb3_ilimit { - gpio-hog; - gpios = <5 GPIO_ACTIVE_LOW>; - input; - line-name = "usb3-current-limit"; - }; - usb3_power { - gpio-hog; - gpios = <6 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb3-power"; - }; - m2_devslp { - gpio-hog; - gpios = <11 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "m.2 devslp"; - }; - sfp_los { - /* SFP loss of signal */ - gpio-hog; - gpios = <12 GPIO_ACTIVE_HIGH>; - input; - line-name = "sfp-los"; - }; - sfp_tx_fault { - /* SFP laser fault */ - gpio-hog; - gpios = <13 GPIO_ACTIVE_HIGH>; - input; - line-name = "sfp-tx-fault"; - }; - sfp_tx_disable { - /* SFP transmit disable */ - gpio-hog; - gpios = <14 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "sfp-tx-disable"; - }; - sfp_mod_def0 { - /* SFP module present */ - gpio-hog; - gpios = <15 GPIO_ACTIVE_LOW>; - input; - line-name = "sfp-mod-def0"; - }; - }; - - /* The MCP3021 is 100kHz clock only */ - mikrobus_adc: mcp3021@4c { - compatible = "microchip,mcp3021"; - reg = <0x4c>; - }; - - /* Also something at 0x64 */ - }; - - i2c@11100 { - /* - * Routed to SFP, mikrobus, and PCIe. - * SFP limits this to 100kHz, and requires - * an AT24C01A/02/04 with address pins tied - * low, which takes addresses 0x50 and 0x51. - * Mikrobus doesn't specify beyond an I2C - * bus being present. - * PCIe uses ARP to assign addresses, or - * 0x63-0x64. - */ - clock-frequency = <100000>; - pinctrl-0 = <&clearfog_i2c1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - pinctrl@18000 { - clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { - marvell,pins = "mpp46"; - marvell,function = "ref"; - }; - clearfog_dsa0_pins: clearfog-dsa0-pins { - marvell,pins = "mpp23", "mpp41"; - marvell,function = "gpio"; - }; - clearfog_i2c1_pins: i2c1-pins { - /* SFP, PCIe, mSATA, mikrobus */ - marvell,pins = "mpp26", "mpp27"; - marvell,function = "i2c1"; - }; - clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - clearfog_sdhci_pins: clearfog-sdhci-pins { - marvell,pins = "mpp21", "mpp28", - "mpp37", "mpp38", - "mpp39", "mpp40"; - marvell,function = "sd0"; - }; - clearfog_spi1_cs_pins: spi1-cs-pins { - marvell,pins = "mpp55"; - marvell,function = "spi1"; - }; - mikro_pins: mikro-pins { - /* int: mpp22 rst: mpp29 */ - marvell,pins = "mpp22", "mpp29"; - marvell,function = "gpio"; - }; - mikro_spi_pins: mikro-spi-pins { - marvell,pins = "mpp43"; - marvell,function = "spi1"; - }; - mikro_uart_pins: mikro-uart-pins { - marvell,pins = "mpp24", "mpp25"; - marvell,function = "ua1"; - }; - rear_button_pins: rear-button-pins { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - }; - - sata@a8000 { - /* pinctrl? */ - status = "okay"; - }; - - sata@e0000 { - /* pinctrl? */ - status = "okay"; - }; - - sdhci@d8000 { - bus-width = <4>; - cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - no-1-8-v; - pinctrl-0 = <&clearfog_sdhci_pins - &clearfog_sdhci_cd_pins>; - pinctrl-names = "default"; - status = "okay"; - vmmc = <®_3p3v>; - wp-inverted; - }; - - serial@12100 { - /* mikrobus uart */ - pinctrl-0 = <&mikro_uart_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - usb@58000 { - /* CON3, nearest power. */ - status = "okay"; - }; - usb3@f0000 { /* CON2, nearest CPU, USB2 only. */ status = "okay"; }; - - usb3@f8000 { - /* CON7 */ - status = "okay"; - }; }; pcie-controller { - status = "okay"; - /* - * The two PCIe units are accessible through - * the mini-PCIe connectors on the board. - */ - pcie@2,0 { - /* Port 1, Lane 0. CON3, nearest power. */ - reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; - status = "okay"; - }; pcie@3,0 { /* Port 2, Lane 0. CON2, nearest CPU. */ reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; @@ -351,6 +72,8 @@ }; dsa@0 { + status = "disabled"; + compatible = "marvell,dsa"; dsa,ethernet = <ð1>; dsa,mii-bus = <&mdio>; @@ -421,26 +144,136 @@ }; }; -&spi1 { +ð1 { + /* ethernet@30000 */ + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&expander0 { /* - * We don't seem to have the W25Q32 on the - * A1 Rev 2.0 boards, so disable SPI. - * CS0: W25Q32 (doesn't appear to be present) - * CS1: - * CS2: mikrobus + * PCA9655 GPIO expander: + * 0-CON3 CLKREQ# + * 1-CON3 PERST# + * 2-CON2 PERST# + * 3-CON3 W_DISABLE + * 4-CON2 CLKREQ# + * 5-USB3 overcurrent + * 6-USB3 power + * 7-CON2 W_DISABLE + * 8-JP4 P1 + * 9-JP4 P4 + * 10-JP4 P5 + * 11-m.2 DEVSLP + * 12-SFP_LOS + * 13-SFP_TX_FAULT + * 14-SFP_TX_DISABLE + * 15-SFP_MOD_DEF0 */ - pinctrl-0 = <&spi1_pins - &clearfog_spi1_cs_pins - &mikro_spi_pins>; - pinctrl-names = "default"; + pcie2_0_clkreq { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie2.0-clkreq"; + }; + pcie2_0_w_disable { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie2.0-w-disable"; + }; +}; + +&pinctrl { + clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { + marvell,pins = "mpp46"; + marvell,function = "ref"; + }; + clearfog_dsa0_pins: clearfog-dsa0-pins { + marvell,pins = "mpp23", "mpp41"; + marvell,function = "gpio"; + }; + clearfog_spi1_cs_pins: spi1-cs-pins { + marvell,pins = "mpp55"; + marvell,function = "spi1"; + }; + rear_button_pins: rear-button-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; +}; + +&mdio { status = "okay"; - spi-flash@0 { + switch@4 { + compatible = "marvell,mv88e6085"; #address-cells = <1>; #size-cells = <0>; - compatible = "w25q32", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <3000000>; - status = "disabled"; + reg = <4>; + pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan5"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + /* 88E1512 external phy */ + reg = <6>; + label = "lan6"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; }; }; + +&spi1 { + /* + * Add SPI CS pins for clearfog: + * CS0: W25Q32 (not populated on uSOM) + * CS1: + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi new file mode 100644 index 000000000000..0f5938bede53 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -0,0 +1,307 @@ +/* + * Device Tree include file for SolidRun Clearfog 88F6828 based boards + * + * Copyright (C) 2015 Russell King + * + * This board is in development; the contents of this file work with + * the A1 rev 2.0 of the board, which does not represent final + * production board. Things will change, don't expect this file to + * remain compatible info the future. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-388.dtsi" +#include "armada-38x-solidrun-microsom.dtsi" + +/ { + aliases { + /* So that mvebu u-boot can update the MAC addresses */ + ethernet1 = ð0; + ethernet2 = ð1; + ethernet3 = ð2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + soc { + internal-regs { + sata@a8000 { + /* pinctrl? */ + status = "okay"; + }; + + sata@e0000 { + /* pinctrl? */ + status = "okay"; + }; + + sdhci@d8000 { + bus-width = <4>; + cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-0 = <µsom_sdhci_pins + &clearfog_sdhci_cd_pins>; + pinctrl-names = "default"; + status = "okay"; + vmmc = <®_3p3v>; + wp-inverted; + }; + + usb@58000 { + /* CON3, nearest power. */ + status = "okay"; + }; + + usb3@f8000 { + /* CON7 */ + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * the mini-PCIe connectors on the board. + */ + pcie@2,0 { + /* Port 1, Lane 0. CON3, nearest power. */ + reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + }; + }; +}; + +ð1 { + /* ethernet@30000 */ + bm,pool-long = <2>; + bm,pool-short = <1>; + buffer-manager = <&bm>; + phy-mode = "sgmii"; + status = "okay"; +}; + +ð2 { + /* ethernet@34000 */ + bm,pool-long = <3>; + bm,pool-short = <1>; + buffer-manager = <&bm>; + phy-mode = "sgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c0 { + /* Is there anything on this? */ + clock-frequency = <100000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* + * PCA9655 GPIO expander, up to 1MHz clock. + * 0-CON3 CLKREQ# + * 1-CON3 PERST# + * 2- + * 3-CON3 W_DISABLE + * 4- + * 5-USB3 overcurrent + * 6-USB3 power + * 7- + * 8-JP4 P1 + * 9-JP4 P4 + * 10-JP4 P5 + * 11-m.2 DEVSLP + * 12-SFP_LOS + * 13-SFP_TX_FAULT + * 14-SFP_TX_DISABLE + * 15-SFP_MOD_DEF0 + */ + expander0: gpio-expander@20 { + /* + * This is how it should be: + * compatible = "onnn,pca9655", "nxp,pca9555"; + * but you can't do this because of the way I2C works. + */ + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + + pcie1_0_clkreq { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie1.0-clkreq"; + }; + pcie1_0_w_disable { + gpio-hog; + gpios = <3 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie1.0-w-disable"; + }; + usb3_ilimit { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + input; + line-name = "usb3-current-limit"; + }; + usb3_power { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb3-power"; + }; + m2_devslp { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "m.2 devslp"; + }; + sfp_los { + /* SFP loss of signal */ + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + input; + line-name = "sfp-los"; + }; + sfp_tx_fault { + /* SFP laser fault */ + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + input; + line-name = "sfp-tx-fault"; + }; + sfp_tx_disable { + /* SFP transmit disable */ + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "sfp-tx-disable"; + }; + sfp_mod_def0 { + /* SFP module present */ + gpio-hog; + gpios = <15 GPIO_ACTIVE_LOW>; + input; + line-name = "sfp-mod-def0"; + }; + }; + + /* The MCP3021 is 100kHz clock only */ + mikrobus_adc: mcp3021@4c { + compatible = "microchip,mcp3021"; + reg = <0x4c>; + }; + + /* Also something at 0x64 */ +}; + +&i2c1 { + /* + * Routed to SFP, mikrobus, and PCIe. + * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with + * address pins tied low, which takes addresses 0x50 and 0x51. + * Mikrobus doesn't specify beyond an I2C bus being present. + * PCIe uses ARP to assign addresses, or 0x63-0x64. + */ + clock-frequency = <100000>; + pinctrl-0 = <&clearfog_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pinctrl { + clearfog_i2c1_pins: i2c1-pins { + /* SFP, PCIe, mSATA, mikrobus */ + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c1"; + }; + clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + mikro_pins: mikro-pins { + /* int: mpp22 rst: mpp29 */ + marvell,pins = "mpp22", "mpp29"; + marvell,function = "gpio"; + }; + mikro_spi_pins: mikro-spi-pins { + marvell,pins = "mpp43"; + marvell,function = "spi1"; + }; + mikro_uart_pins: mikro-uart-pins { + marvell,pins = "mpp24", "mpp25"; + marvell,function = "ua1"; + }; +}; + +&spi1 { + /* + * Add SPI CS pins for clearfog: + * CS0: W25Q32 (not populated on uSOM) + * CS1: PIC microcontroller (Pro models) + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins &mikro_spi_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + /* mikrobus uart */ + pinctrl-0 = <&mikro_uart_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index de26c762239c..1ac923826445 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index dd3462ddb6b9..af82f275eac2 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 8c9842237b60..9b508a8161f5 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -17,17 +17,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -62,45 +62,6 @@ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { - ethernet@70000 { - pinctrl-0 = <&ge0_rgmii_pins>; - pinctrl-names = "default"; - phy = <&phy_dedicated>; - phy-mode = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; - status = "okay"; - }; - - mdio@72004 { - /* - * Add the phy clock here, so the phy can be - * accessed to read its IDs prior to binding - * with the driver. - */ - pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>; - pinctrl-names = "default"; - - phy_dedicated: ethernet-phy@0 { - /* - * Annoyingly, the marvell phy driver - * configures the LED register, rather - * than preserving reset-loaded setting. - * We undo that rubbish here. - */ - marvell,reg-init = <3 16 0 0x101e>; - reg = <0>; - }; - }; - - pinctrl@18000 { - microsom_phy_clk_pins: microsom-phy-clk-pins { - marvell,pins = "mpp45"; - marvell,function = "ref"; - }; - }; - rtc@a3800 { /* * If the rtc doesn't work, run "date reset" @@ -108,21 +69,78 @@ */ status = "okay"; }; + }; + }; +}; - serial@12000 { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; +&bm { + status = "okay"; +}; - bm@c8000 { - status = "okay"; - }; - }; +&bm_bppi { + status = "okay"; +}; - bm-bppi { - status = "okay"; - }; +ð0 { + /* ethernet@70000 */ + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy_dedicated>; + phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + status = "okay"; +}; + +&mdio { + /* + * Add the phy clock here, so the phy can be accessed to read its + * IDs prior to binding with the driver. + */ + pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>; + pinctrl-names = "default"; + + phy_dedicated: ethernet-phy@0 { + /* + * Annoyingly, the marvell phy driver configures the LED + * register, rather than preserving reset-loaded setting. + * We undo that rubbish here. + */ + marvell,reg-init = <3 16 0 0x101e>; + reg = <0>; + }; +}; + +&pinctrl { + microsom_phy_clk_pins: microsom-phy-clk-pins { + marvell,pins = "mpp45"; + marvell,function = "ref"; + }; + /* Optional eMMC */ + microsom_sdhci_pins: microsom-sdhci-pins { + marvell,pins = "mpp21", "mpp28", "mpp37", + "mpp38", "mpp39", "mpp40"; + marvell,function = "sd0"; + }; +}; + +&spi1 { + /* The microsom has an optional W25Q32 on board, connected to CS0 */ + pinctrl-0 = <&spi1_pins>; + w25q32: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q32", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <3000000>; + status = "disabled"; }; }; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 7450e9fea45d..79b767507eab 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts index 34e279d973c8..2afed2ce4741 100644 --- a/arch/arm/boot/dts/armada-390-db.dts +++ b/arch/arm/boot/dts/armada-390-db.dts @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi index 6cd18d8aaac7..0d8a54ad007c 100644 --- a/arch/arm/boot/dts/armada-390.dtsi +++ b/arch/arm/boot/dts/armada-390.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/armada-395.dtsi index ab5dc49f2bff..bf7e4335e36a 100644 --- a/arch/arm/boot/dts/armada-395.dtsi +++ b/arch/arm/boot/dts/armada-395.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index 268c8349c884..e8604281c3c9 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi index 234a99891a29..1f4e113fc821 100644 --- a/arch/arm/boot/dts/armada-398.dtsi +++ b/arch/arm/boot/dts/armada-398.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index de171baffcf6..60fbfd5907c7 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi new file mode 100644 index 000000000000..f6a03dcee5ef --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -0,0 +1,254 @@ +/* + * Device Tree Include file for Marvell 98dx3236 family SoC + * + * Copyright (C) 2016 Allied Telesis Labs + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Contains definitions specific to the 98dx3236 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-xp.dtsi" + +/ { + model = "Marvell 98DX3236 SoC"; + compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,98dx3236-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <0>; + clocks = <&cpuclk 0>; + clock-latency = <1000000>; + }; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 + MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000 + MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>; + + /* + * 98DX3236 has 1 x1 PCIe unit Gen2.0 + */ + pciec: pcie-controller@82000000 { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + msi-parent = <&mpic>; + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>; + + pcie1: pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + }; + + internal-regs { + coreclk: mvebu-sar@18230 { + compatible = "marvell,mv98dx3236-core-clock"; + }; + + cpuclk: clock-complex@18700 { + compatible = "marvell,mv98dx3236-cpu-clock"; + }; + + corediv-clock@18740 { + status = "disabled"; + }; + + xor@60900 { + status = "disabled"; + }; + + crypto@90000 { + status = "disabled"; + }; + + xor@f0900 { + status = "disabled"; + }; + + xor@f0800 { + compatible = "marvell,orion-xor"; + reg = <0xf0800 0x100 + 0xf0a00 0x100>; + clocks = <&gateclk 22>; + status = "okay"; + + xor10 { + interrupts = <51>; + dmacap,memcpy; + dmacap,xor; + }; + xor11 { + interrupts = <52>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + + /* does not exist */ + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + status = "disabled"; + }; + + gpio2: gpio@18180 { /* rework some properties */ + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <1>; /* only gpio #32 */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <87>; + }; + + nand: nand@d0000 { + clocks = <&dfx_coredivclk 0>; + }; + }; + + dfxr: dfx-registers@ac000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; + + dfx_coredivclk: corediv-clock@f8268 { + compatible = "marvell,mv98dx3236-corediv-clock"; + reg = <0xf8268 0xc>; + #clock-cells = <1>; + clocks = <&mainpll>; + clock-output-names = "nand"; + }; + + dfx: dfx@0 { + compatible = "marvell,dfx-server"; + reg = <0 0x100000>; + }; + }; + + switch: switch@a8000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>; + + pp0: packet-processor@0 { + compatible = "marvell,prestera-98dx3236"; + reg = <0 0x4000000>; + interrupts = <33>, <34>, <35>; + dfx = <&dfx>; + }; + }; + }; +}; + +&pinctrl { + compatible = "marvell,98dx3236-pinctrl"; + + spi0_pins: spi0-pins { + marvell,pins = "mpp0", "mpp1", + "mpp2", "mpp3"; + marvell,function = "spi0"; + }; +}; + +&sdio { + status = "disabled"; +}; + +&crypto_sram0 { + status = "disabled"; +}; + +&crypto_sram1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi new file mode 100644 index 000000000000..e1580afdc260 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi @@ -0,0 +1,76 @@ +/* + * Device Tree Include file for Marvell 98dx3336 family SoC + * + * Copyright (C) 2016 Allied Telesis Labs + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Contains definitions specific to the 98dx3236 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "Marvell 98DX3336 SoC"; + compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp"; + + cpus { + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + clock-latency = <1000000>; + }; + }; + + soc { + internal-regs { + resume@20980 { + compatible = "marvell,98dx3336-resume-ctrl"; + reg = <0x20980 0x10>; + }; + }; + }; +}; + +&pp0 { + compatible = "marvell,prestera-98dx3336"; +}; diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi new file mode 100644 index 000000000000..b9d9b269efb4 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi @@ -0,0 +1,90 @@ +/* + * Device Tree Include file for Marvell 98dx4521 family SoC + * + * Copyright (C) 2016 Allied Telesis Labs + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Contains definitions specific to the 98dx4521 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-xp-98dx3236.dtsi" + +/ { + model = "Marvell 98DX4251 SoC"; + compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp"; + + cpus { + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + clock-latency = <1000000>; + }; + }; + + soc { + internal-regs { + resume@20980 { + compatible = "marvell,98dx3336-resume-ctrl"; + reg = <0x20980 0x10>; + }; + }; + }; +}; + +&sdio { + status = "okay"; +}; + +&pinctrl { + compatible = "marvell,98dx4251-pinctrl"; + + sdio_pins: sdio-pins { + marvell,pins = "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10"; + marvell,function = "sd0"; + }; +}; + +&pp0 { + compatible = "marvell,prestera-98dx4251"; +}; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 1e1fc4fccbad..d0c6a01f48a6 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -20,17 +20,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -39,11 +39,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts new file mode 100644 index 000000000000..a8130805074e --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts @@ -0,0 +1,151 @@ +/* + * Device Tree file for DB-DXBC2 board + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Based on armada-xp-db.dts + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx4251.dtsi" + +/ { + model = "Marvell Bobcat2 Evaluation Board"; + compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ + }; + +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&nand { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; +}; + +&sdio { + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00ec0000>; + label = "unused"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts new file mode 100644 index 000000000000..4e07cb6ed800 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -0,0 +1,142 @@ +/* + * Device Tree file for DB-XC3-24G4XG board + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Based on armada-xp-db.dts + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx3336.dtsi" + +/ { + model = "DB-XC3-24G4XG"; + compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */ + }; +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&nand { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00ec0000>; + label = "unused"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 44a724d39dbe..a33974254d8c 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 72cb8fa377e3..d62bf7bea1df 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index d848ae9007db..ce0afba1ce58 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 83ac884c0f8a..42ea8764814c 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -302,6 +302,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -398,3 +400,54 @@ spi-max-frequency = <40000000>; }; }; + +&mdio { + status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "internet"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 16277380e714..977f6b3fc1f8 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 05c164b5786d..07c5090ecd29 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 07894b0d3e59..64e936ae7b22 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 775bee53ce86..d1383dde43eb 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index a2f0e789465d..40c6fe21e720 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index b577c9fb03a4..66b78131a038 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index e803da03146a..d8e05bab0cee 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 5274e4ff5d62..fa1e881266ac 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 1b7a5ff0e533..d967603dade8 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -23,3 +23,17 @@ &uart5 { status = "okay"; }; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index cc5fcf2940bf..1d2fc1e1dc29 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -12,14 +12,34 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,38400 earlyprintk"; + bootargs = "console=ttyS4,115200 earlyprintk"; }; memory { - reg = <0x40000000 0x10000000>; + reg = <0x40000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@5f000000 { + no-map; + reg = <0x5f000000 0x01000000>; /* 16M */ + }; }; }; &uart5 { status = "okay"; }; + +&mac0 { + status = "okay"; + + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts new file mode 100644 index 000000000000..7a3b2b50c884 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -0,0 +1,45 @@ +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "Romulus BMC"; + compatible = "ibm,romulus-bmc", "aspeed,ast2500"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@bf000000 { + no-map; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 22dee5937d5c..0b4932cc02a8 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -41,6 +41,22 @@ reg = <0x1e6c0080 0x80>; }; + mac0: ethernet@1e660000 { + compatible = "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + interrupts = <2>; + no-hw-checksum; + status = "disabled"; + }; + + mac1: ethernet@1e680000 { + compatible = "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + interrupts = <3>; + no-hw-checksum; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -54,6 +70,756 @@ clocks = <&clk_clkin>; }; + syscon: syscon@1e6e2000 { + compatible = "aspeed,g4-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + pinctrl: pinctrl { + compatible = "aspeed,g4-pinctrl"; + + pinctrl_acpi_default: acpi_default { + function = "ACPI"; + groups = "ACPI"; + }; + + pinctrl_adc0_default: adc0_default { + function = "ADC0"; + groups = "ADC0"; + }; + + pinctrl_adc1_default: adc1_default { + function = "ADC1"; + groups = "ADC1"; + }; + + pinctrl_adc10_default: adc10_default { + function = "ADC10"; + groups = "ADC10"; + }; + + pinctrl_adc11_default: adc11_default { + function = "ADC11"; + groups = "ADC11"; + }; + + pinctrl_adc12_default: adc12_default { + function = "ADC12"; + groups = "ADC12"; + }; + + pinctrl_adc13_default: adc13_default { + function = "ADC13"; + groups = "ADC13"; + }; + + pinctrl_adc14_default: adc14_default { + function = "ADC14"; + groups = "ADC14"; + }; + + pinctrl_adc15_default: adc15_default { + function = "ADC15"; + groups = "ADC15"; + }; + + pinctrl_adc2_default: adc2_default { + function = "ADC2"; + groups = "ADC2"; + }; + + pinctrl_adc3_default: adc3_default { + function = "ADC3"; + groups = "ADC3"; + }; + + pinctrl_adc4_default: adc4_default { + function = "ADC4"; + groups = "ADC4"; + }; + + pinctrl_adc5_default: adc5_default { + function = "ADC5"; + groups = "ADC5"; + }; + + pinctrl_adc6_default: adc6_default { + function = "ADC6"; + groups = "ADC6"; + }; + + pinctrl_adc7_default: adc7_default { + function = "ADC7"; + groups = "ADC7"; + }; + + pinctrl_adc8_default: adc8_default { + function = "ADC8"; + groups = "ADC8"; + }; + + pinctrl_adc9_default: adc9_default { + function = "ADC9"; + groups = "ADC9"; + }; + + pinctrl_bmcint_default: bmcint_default { + function = "BMCINT"; + groups = "BMCINT"; + }; + + pinctrl_ddcclk_default: ddcclk_default { + function = "DDCCLK"; + groups = "DDCCLK"; + }; + + pinctrl_ddcdat_default: ddcdat_default { + function = "DDCDAT"; + groups = "DDCDAT"; + }; + + pinctrl_extrst_default: extrst_default { + function = "EXTRST"; + groups = "EXTRST"; + }; + + pinctrl_flack_default: flack_default { + function = "FLACK"; + groups = "FLACK"; + }; + + pinctrl_flbusy_default: flbusy_default { + function = "FLBUSY"; + groups = "FLBUSY"; + }; + + pinctrl_flwp_default: flwp_default { + function = "FLWP"; + groups = "FLWP"; + }; + + pinctrl_gpid_default: gpid_default { + function = "GPID"; + groups = "GPID"; + }; + + pinctrl_gpid0_default: gpid0_default { + function = "GPID0"; + groups = "GPID0"; + }; + + pinctrl_gpid2_default: gpid2_default { + function = "GPID2"; + groups = "GPID2"; + }; + + pinctrl_gpid4_default: gpid4_default { + function = "GPID4"; + groups = "GPID4"; + }; + + pinctrl_gpid6_default: gpid6_default { + function = "GPID6"; + groups = "GPID6"; + }; + + pinctrl_gpie0_default: gpie0_default { + function = "GPIE0"; + groups = "GPIE0"; + }; + + pinctrl_gpie2_default: gpie2_default { + function = "GPIE2"; + groups = "GPIE2"; + }; + + pinctrl_gpie4_default: gpie4_default { + function = "GPIE4"; + groups = "GPIE4"; + }; + + pinctrl_gpie6_default: gpie6_default { + function = "GPIE6"; + groups = "GPIE6"; + }; + + pinctrl_i2c10_default: i2c10_default { + function = "I2C10"; + groups = "I2C10"; + }; + + pinctrl_i2c11_default: i2c11_default { + function = "I2C11"; + groups = "I2C11"; + }; + + pinctrl_i2c12_default: i2c12_default { + function = "I2C12"; + groups = "I2C12"; + }; + + pinctrl_i2c13_default: i2c13_default { + function = "I2C13"; + groups = "I2C13"; + }; + + pinctrl_i2c14_default: i2c14_default { + function = "I2C14"; + groups = "I2C14"; + }; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_i2c4_default: i2c4_default { + function = "I2C4"; + groups = "I2C4"; + }; + + pinctrl_i2c5_default: i2c5_default { + function = "I2C5"; + groups = "I2C5"; + }; + + pinctrl_i2c6_default: i2c6_default { + function = "I2C6"; + groups = "I2C6"; + }; + + pinctrl_i2c7_default: i2c7_default { + function = "I2C7"; + groups = "I2C7"; + }; + + pinctrl_i2c8_default: i2c8_default { + function = "I2C8"; + groups = "I2C8"; + }; + + pinctrl_i2c9_default: i2c9_default { + function = "I2C9"; + groups = "I2C9"; + }; + + pinctrl_lpcpd_default: lpcpd_default { + function = "LPCPD"; + groups = "LPCPD"; + }; + + pinctrl_lpcpme_default: lpcpme_default { + function = "LPCPME"; + groups = "LPCPME"; + }; + + pinctrl_lpcrst_default: lpcrst_default { + function = "LPCRST"; + groups = "LPCRST"; + }; + + pinctrl_lpcsmi_default: lpcsmi_default { + function = "LPCSMI"; + groups = "LPCSMI"; + }; + + pinctrl_mac1link_default: mac1link_default { + function = "MAC1LINK"; + groups = "MAC1LINK"; + }; + + pinctrl_mac2link_default: mac2link_default { + function = "MAC2LINK"; + groups = "MAC2LINK"; + }; + + pinctrl_mdio1_default: mdio1_default { + function = "MDIO1"; + groups = "MDIO1"; + }; + + pinctrl_mdio2_default: mdio2_default { + function = "MDIO2"; + groups = "MDIO2"; + }; + + pinctrl_ncts1_default: ncts1_default { + function = "NCTS1"; + groups = "NCTS1"; + }; + + pinctrl_ncts2_default: ncts2_default { + function = "NCTS2"; + groups = "NCTS2"; + }; + + pinctrl_ncts3_default: ncts3_default { + function = "NCTS3"; + groups = "NCTS3"; + }; + + pinctrl_ncts4_default: ncts4_default { + function = "NCTS4"; + groups = "NCTS4"; + }; + + pinctrl_ndcd1_default: ndcd1_default { + function = "NDCD1"; + groups = "NDCD1"; + }; + + pinctrl_ndcd2_default: ndcd2_default { + function = "NDCD2"; + groups = "NDCD2"; + }; + + pinctrl_ndcd3_default: ndcd3_default { + function = "NDCD3"; + groups = "NDCD3"; + }; + + pinctrl_ndcd4_default: ndcd4_default { + function = "NDCD4"; + groups = "NDCD4"; + }; + + pinctrl_ndsr1_default: ndsr1_default { + function = "NDSR1"; + groups = "NDSR1"; + }; + + pinctrl_ndsr2_default: ndsr2_default { + function = "NDSR2"; + groups = "NDSR2"; + }; + + pinctrl_ndsr3_default: ndsr3_default { + function = "NDSR3"; + groups = "NDSR3"; + }; + + pinctrl_ndsr4_default: ndsr4_default { + function = "NDSR4"; + groups = "NDSR4"; + }; + + pinctrl_ndtr1_default: ndtr1_default { + function = "NDTR1"; + groups = "NDTR1"; + }; + + pinctrl_ndtr2_default: ndtr2_default { + function = "NDTR2"; + groups = "NDTR2"; + }; + + pinctrl_ndtr3_default: ndtr3_default { + function = "NDTR3"; + groups = "NDTR3"; + }; + + pinctrl_ndtr4_default: ndtr4_default { + function = "NDTR4"; + groups = "NDTR4"; + }; + + pinctrl_ndts4_default: ndts4_default { + function = "NDTS4"; + groups = "NDTS4"; + }; + + pinctrl_nri1_default: nri1_default { + function = "NRI1"; + groups = "NRI1"; + }; + + pinctrl_nri2_default: nri2_default { + function = "NRI2"; + groups = "NRI2"; + }; + + pinctrl_nri3_default: nri3_default { + function = "NRI3"; + groups = "NRI3"; + }; + + pinctrl_nri4_default: nri4_default { + function = "NRI4"; + groups = "NRI4"; + }; + + pinctrl_nrts1_default: nrts1_default { + function = "NRTS1"; + groups = "NRTS1"; + }; + + pinctrl_nrts2_default: nrts2_default { + function = "NRTS2"; + groups = "NRTS2"; + }; + + pinctrl_nrts3_default: nrts3_default { + function = "NRTS3"; + groups = "NRTS3"; + }; + + pinctrl_oscclk_default: oscclk_default { + function = "OSCCLK"; + groups = "OSCCLK"; + }; + + pinctrl_pwm0_default: pwm0_default { + function = "PWM0"; + groups = "PWM0"; + }; + + pinctrl_pwm1_default: pwm1_default { + function = "PWM1"; + groups = "PWM1"; + }; + + pinctrl_pwm2_default: pwm2_default { + function = "PWM2"; + groups = "PWM2"; + }; + + pinctrl_pwm3_default: pwm3_default { + function = "PWM3"; + groups = "PWM3"; + }; + + pinctrl_pwm4_default: pwm4_default { + function = "PWM4"; + groups = "PWM4"; + }; + + pinctrl_pwm5_default: pwm5_default { + function = "PWM5"; + groups = "PWM5"; + }; + + pinctrl_pwm6_default: pwm6_default { + function = "PWM6"; + groups = "PWM6"; + }; + + pinctrl_pwm7_default: pwm7_default { + function = "PWM7"; + groups = "PWM7"; + }; + + pinctrl_rgmii1_default: rgmii1_default { + function = "RGMII1"; + groups = "RGMII1"; + }; + + pinctrl_rgmii2_default: rgmii2_default { + function = "RGMII2"; + groups = "RGMII2"; + }; + + pinctrl_rmii1_default: rmii1_default { + function = "RMII1"; + groups = "RMII1"; + }; + + pinctrl_rmii2_default: rmii2_default { + function = "RMII2"; + groups = "RMII2"; + }; + + pinctrl_rom16_default: rom16_default { + function = "ROM16"; + groups = "ROM16"; + }; + + pinctrl_rom8_default: rom8_default { + function = "ROM8"; + groups = "ROM8"; + }; + + pinctrl_romcs1_default: romcs1_default { + function = "ROMCS1"; + groups = "ROMCS1"; + }; + + pinctrl_romcs2_default: romcs2_default { + function = "ROMCS2"; + groups = "ROMCS2"; + }; + + pinctrl_romcs3_default: romcs3_default { + function = "ROMCS3"; + groups = "ROMCS3"; + }; + + pinctrl_romcs4_default: romcs4_default { + function = "ROMCS4"; + groups = "ROMCS4"; + }; + + pinctrl_rxd1_default: rxd1_default { + function = "RXD1"; + groups = "RXD1"; + }; + + pinctrl_rxd2_default: rxd2_default { + function = "RXD2"; + groups = "RXD2"; + }; + + pinctrl_rxd3_default: rxd3_default { + function = "RXD3"; + groups = "RXD3"; + }; + + pinctrl_rxd4_default: rxd4_default { + function = "RXD4"; + groups = "RXD4"; + }; + + pinctrl_salt1_default: salt1_default { + function = "SALT1"; + groups = "SALT1"; + }; + + pinctrl_salt2_default: salt2_default { + function = "SALT2"; + groups = "SALT2"; + }; + + pinctrl_salt3_default: salt3_default { + function = "SALT3"; + groups = "SALT3"; + }; + + pinctrl_salt4_default: salt4_default { + function = "SALT4"; + groups = "SALT4"; + }; + + pinctrl_sd1_default: sd1_default { + function = "SD1"; + groups = "SD1"; + }; + + pinctrl_sd2_default: sd2_default { + function = "SD2"; + groups = "SD2"; + }; + + pinctrl_sgpmck_default: sgpmck_default { + function = "SGPMCK"; + groups = "SGPMCK"; + }; + + pinctrl_sgpmi_default: sgpmi_default { + function = "SGPMI"; + groups = "SGPMI"; + }; + + pinctrl_sgpmld_default: sgpmld_default { + function = "SGPMLD"; + groups = "SGPMLD"; + }; + + pinctrl_sgpmo_default: sgpmo_default { + function = "SGPMO"; + groups = "SGPMO"; + }; + + pinctrl_sgpsck_default: sgpsck_default { + function = "SGPSCK"; + groups = "SGPSCK"; + }; + + pinctrl_sgpsi0_default: sgpsi0_default { + function = "SGPSI0"; + groups = "SGPSI0"; + }; + + pinctrl_sgpsi1_default: sgpsi1_default { + function = "SGPSI1"; + groups = "SGPSI1"; + }; + + pinctrl_sgpsld_default: sgpsld_default { + function = "SGPSLD"; + groups = "SGPSLD"; + }; + + pinctrl_sioonctrl_default: sioonctrl_default { + function = "SIOONCTRL"; + groups = "SIOONCTRL"; + }; + + pinctrl_siopbi_default: siopbi_default { + function = "SIOPBI"; + groups = "SIOPBI"; + }; + + pinctrl_siopbo_default: siopbo_default { + function = "SIOPBO"; + groups = "SIOPBO"; + }; + + pinctrl_siopwreq_default: siopwreq_default { + function = "SIOPWREQ"; + groups = "SIOPWREQ"; + }; + + pinctrl_siopwrgd_default: siopwrgd_default { + function = "SIOPWRGD"; + groups = "SIOPWRGD"; + }; + + pinctrl_sios3_default: sios3_default { + function = "SIOS3"; + groups = "SIOS3"; + }; + + pinctrl_sios5_default: sios5_default { + function = "SIOS5"; + groups = "SIOS5"; + }; + + pinctrl_siosci_default: siosci_default { + function = "SIOSCI"; + groups = "SIOSCI"; + }; + + pinctrl_spi1_default: spi1_default { + function = "SPI1"; + groups = "SPI1"; + }; + + pinctrl_spi1debug_default: spi1debug_default { + function = "SPI1DEBUG"; + groups = "SPI1DEBUG"; + }; + + pinctrl_spi1passthru_default: spi1passthru_default { + function = "SPI1PASSTHRU"; + groups = "SPI1PASSTHRU"; + }; + + pinctrl_spics1_default: spics1_default { + function = "SPICS1"; + groups = "SPICS1"; + }; + + pinctrl_timer3_default: timer3_default { + function = "TIMER3"; + groups = "TIMER3"; + }; + + pinctrl_timer4_default: timer4_default { + function = "TIMER4"; + groups = "TIMER4"; + }; + + pinctrl_timer5_default: timer5_default { + function = "TIMER5"; + groups = "TIMER5"; + }; + + pinctrl_timer6_default: timer6_default { + function = "TIMER6"; + groups = "TIMER6"; + }; + + pinctrl_timer7_default: timer7_default { + function = "TIMER7"; + groups = "TIMER7"; + }; + + pinctrl_timer8_default: timer8_default { + function = "TIMER8"; + groups = "TIMER8"; + }; + + pinctrl_txd1_default: txd1_default { + function = "TXD1"; + groups = "TXD1"; + }; + + pinctrl_txd2_default: txd2_default { + function = "TXD2"; + groups = "TXD2"; + }; + + pinctrl_txd3_default: txd3_default { + function = "TXD3"; + groups = "TXD3"; + }; + + pinctrl_txd4_default: txd4_default { + function = "TXD4"; + groups = "TXD4"; + }; + + pinctrl_uart6_default: uart6_default { + function = "UART6"; + groups = "UART6"; + }; + + pinctrl_usbcki_default: usbcki_default { + function = "USBCKI"; + groups = "USBCKI"; + }; + + pinctrl_vgabios_rom_default: vgabios_rom_default { + function = "VGABIOS_ROM"; + groups = "VGABIOS_ROM"; + }; + + pinctrl_vgahs_default: vgahs_default { + function = "VGAHS"; + groups = "VGAHS"; + }; + + pinctrl_vgavs_default: vgavs_default { + function = "VGAVS"; + groups = "VGAVS"; + }; + + pinctrl_vpi18_default: vpi18_default { + function = "VPI18"; + groups = "VPI18"; + }; + + pinctrl_vpi24_default: vpi24_default { + function = "VPI24"; + groups = "VPI24"; + }; + + pinctrl_vpi30_default: vpi30_default { + function = "VPI30"; + groups = "VPI30"; + }; + + pinctrl_vpo12_default: vpo12_default { + function = "VPO12"; + groups = "VPO12"; + }; + + pinctrl_vpo24_default: vpo24_default { + function = "VPO24"; + groups = "VPO24"; + }; + + pinctrl_wdtrst1_default: wdtrst1_default { + function = "WDTRST1"; + groups = "WDTRST1"; + }; + + pinctrl_wdtrst2_default: wdtrst2_default { + function = "WDTRST2"; + groups = "WDTRST2"; + }; + + }; + }; + clk_apb: clk_apb@1e6e2008 { #clock-cells = <0>; compatible = "aspeed,g4-apb-clock"; @@ -72,6 +838,16 @@ reg = <0x1e720000 0x8000>; // 32K }; + gpio: gpio@1e780000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2400-gpio"; + reg = <0x1e780000 0x1000>; + interrupts = <20>; + gpio-ranges = <&pinctrl 0 0 220>; + interrupt-controller; + }; + timer: timer@1e782000 { compatible = "aspeed,ast2400-timer"; reg = <0x1e782000 0x90>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index dd94d9361fda..b664fe380936 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -32,6 +32,22 @@ reg = <0x1e6c0080 0x80>; }; + mac0: ethernet@1e660000 { + compatible = "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + interrupts = <2>; + no-hw-checksum; + status = "disabled"; + }; + + mac1: ethernet@1e680000 { + compatible = "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + interrupts = <3>; + no-hw-checksum; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -44,6 +60,822 @@ reg = <0x1e6e2070 0x04>; }; + syscon: syscon@1e6e2000 { + compatible = "aspeed,g5-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + pinctrl: pinctrl { + compatible = "aspeed,g5-pinctrl"; + aspeed,external-nodes = <&gfx &lhc>; + + pinctrl_acpi_default: acpi_default { + function = "ACPI"; + groups = "ACPI"; + }; + + pinctrl_adc0_default: adc0_default { + function = "ADC0"; + groups = "ADC0"; + }; + + pinctrl_adc1_default: adc1_default { + function = "ADC1"; + groups = "ADC1"; + }; + + pinctrl_adc10_default: adc10_default { + function = "ADC10"; + groups = "ADC10"; + }; + + pinctrl_adc11_default: adc11_default { + function = "ADC11"; + groups = "ADC11"; + }; + + pinctrl_adc12_default: adc12_default { + function = "ADC12"; + groups = "ADC12"; + }; + + pinctrl_adc13_default: adc13_default { + function = "ADC13"; + groups = "ADC13"; + }; + + pinctrl_adc14_default: adc14_default { + function = "ADC14"; + groups = "ADC14"; + }; + + pinctrl_adc15_default: adc15_default { + function = "ADC15"; + groups = "ADC15"; + }; + + pinctrl_adc2_default: adc2_default { + function = "ADC2"; + groups = "ADC2"; + }; + + pinctrl_adc3_default: adc3_default { + function = "ADC3"; + groups = "ADC3"; + }; + + pinctrl_adc4_default: adc4_default { + function = "ADC4"; + groups = "ADC4"; + }; + + pinctrl_adc5_default: adc5_default { + function = "ADC5"; + groups = "ADC5"; + }; + + pinctrl_adc6_default: adc6_default { + function = "ADC6"; + groups = "ADC6"; + }; + + pinctrl_adc7_default: adc7_default { + function = "ADC7"; + groups = "ADC7"; + }; + + pinctrl_adc8_default: adc8_default { + function = "ADC8"; + groups = "ADC8"; + }; + + pinctrl_adc9_default: adc9_default { + function = "ADC9"; + groups = "ADC9"; + }; + + pinctrl_bmcint_default: bmcint_default { + function = "BMCINT"; + groups = "BMCINT"; + }; + + pinctrl_ddcclk_default: ddcclk_default { + function = "DDCCLK"; + groups = "DDCCLK"; + }; + + pinctrl_ddcdat_default: ddcdat_default { + function = "DDCDAT"; + groups = "DDCDAT"; + }; + + pinctrl_espi_default: espi_default { + function = "ESPI"; + groups = "ESPI"; + }; + + pinctrl_fwspics1_default: fwspics1_default { + function = "FWSPICS1"; + groups = "FWSPICS1"; + }; + + pinctrl_fwspics2_default: fwspics2_default { + function = "FWSPICS2"; + groups = "FWSPICS2"; + }; + + pinctrl_gpid0_default: gpid0_default { + function = "GPID0"; + groups = "GPID0"; + }; + + pinctrl_gpid2_default: gpid2_default { + function = "GPID2"; + groups = "GPID2"; + }; + + pinctrl_gpid4_default: gpid4_default { + function = "GPID4"; + groups = "GPID4"; + }; + + pinctrl_gpid6_default: gpid6_default { + function = "GPID6"; + groups = "GPID6"; + }; + + pinctrl_gpie0_default: gpie0_default { + function = "GPIE0"; + groups = "GPIE0"; + }; + + pinctrl_gpie2_default: gpie2_default { + function = "GPIE2"; + groups = "GPIE2"; + }; + + pinctrl_gpie4_default: gpie4_default { + function = "GPIE4"; + groups = "GPIE4"; + }; + + pinctrl_gpie6_default: gpie6_default { + function = "GPIE6"; + groups = "GPIE6"; + }; + + pinctrl_i2c10_default: i2c10_default { + function = "I2C10"; + groups = "I2C10"; + }; + + pinctrl_i2c11_default: i2c11_default { + function = "I2C11"; + groups = "I2C11"; + }; + + pinctrl_i2c12_default: i2c12_default { + function = "I2C12"; + groups = "I2C12"; + }; + + pinctrl_i2c13_default: i2c13_default { + function = "I2C13"; + groups = "I2C13"; + }; + + pinctrl_i2c14_default: i2c14_default { + function = "I2C14"; + groups = "I2C14"; + }; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_i2c4_default: i2c4_default { + function = "I2C4"; + groups = "I2C4"; + }; + + pinctrl_i2c5_default: i2c5_default { + function = "I2C5"; + groups = "I2C5"; + }; + + pinctrl_i2c6_default: i2c6_default { + function = "I2C6"; + groups = "I2C6"; + }; + + pinctrl_i2c7_default: i2c7_default { + function = "I2C7"; + groups = "I2C7"; + }; + + pinctrl_i2c8_default: i2c8_default { + function = "I2C8"; + groups = "I2C8"; + }; + + pinctrl_i2c9_default: i2c9_default { + function = "I2C9"; + groups = "I2C9"; + }; + + pinctrl_lad0_default: lad0_default { + function = "LAD0"; + groups = "LAD0"; + }; + + pinctrl_lad1_default: lad1_default { + function = "LAD1"; + groups = "LAD1"; + }; + + pinctrl_lad2_default: lad2_default { + function = "LAD2"; + groups = "LAD2"; + }; + + pinctrl_lad3_default: lad3_default { + function = "LAD3"; + groups = "LAD3"; + }; + + pinctrl_lclk_default: lclk_default { + function = "LCLK"; + groups = "LCLK"; + }; + + pinctrl_lframe_default: lframe_default { + function = "LFRAME"; + groups = "LFRAME"; + }; + + pinctrl_lpchc_default: lpchc_default { + function = "LPCHC"; + groups = "LPCHC"; + }; + + pinctrl_lpcpd_default: lpcpd_default { + function = "LPCPD"; + groups = "LPCPD"; + }; + + pinctrl_lpcplus_default: lpcplus_default { + function = "LPCPLUS"; + groups = "LPCPLUS"; + }; + + pinctrl_lpcpme_default: lpcpme_default { + function = "LPCPME"; + groups = "LPCPME"; + }; + + pinctrl_lpcrst_default: lpcrst_default { + function = "LPCRST"; + groups = "LPCRST"; + }; + + pinctrl_lpcsmi_default: lpcsmi_default { + function = "LPCSMI"; + groups = "LPCSMI"; + }; + + pinctrl_lsirq_default: lsirq_default { + function = "LSIRQ"; + groups = "LSIRQ"; + }; + + pinctrl_mac1link_default: mac1link_default { + function = "MAC1LINK"; + groups = "MAC1LINK"; + }; + + pinctrl_mac2link_default: mac2link_default { + function = "MAC2LINK"; + groups = "MAC2LINK"; + }; + + pinctrl_mdio1_default: mdio1_default { + function = "MDIO1"; + groups = "MDIO1"; + }; + + pinctrl_mdio2_default: mdio2_default { + function = "MDIO2"; + groups = "MDIO2"; + }; + + pinctrl_ncts1_default: ncts1_default { + function = "NCTS1"; + groups = "NCTS1"; + }; + + pinctrl_ncts2_default: ncts2_default { + function = "NCTS2"; + groups = "NCTS2"; + }; + + pinctrl_ncts3_default: ncts3_default { + function = "NCTS3"; + groups = "NCTS3"; + }; + + pinctrl_ncts4_default: ncts4_default { + function = "NCTS4"; + groups = "NCTS4"; + }; + + pinctrl_ndcd1_default: ndcd1_default { + function = "NDCD1"; + groups = "NDCD1"; + }; + + pinctrl_ndcd2_default: ndcd2_default { + function = "NDCD2"; + groups = "NDCD2"; + }; + + pinctrl_ndcd3_default: ndcd3_default { + function = "NDCD3"; + groups = "NDCD3"; + }; + + pinctrl_ndcd4_default: ndcd4_default { + function = "NDCD4"; + groups = "NDCD4"; + }; + + pinctrl_ndsr1_default: ndsr1_default { + function = "NDSR1"; + groups = "NDSR1"; + }; + + pinctrl_ndsr2_default: ndsr2_default { + function = "NDSR2"; + groups = "NDSR2"; + }; + + pinctrl_ndsr3_default: ndsr3_default { + function = "NDSR3"; + groups = "NDSR3"; + }; + + pinctrl_ndsr4_default: ndsr4_default { + function = "NDSR4"; + groups = "NDSR4"; + }; + + pinctrl_ndtr1_default: ndtr1_default { + function = "NDTR1"; + groups = "NDTR1"; + }; + + pinctrl_ndtr2_default: ndtr2_default { + function = "NDTR2"; + groups = "NDTR2"; + }; + + pinctrl_ndtr3_default: ndtr3_default { + function = "NDTR3"; + groups = "NDTR3"; + }; + + pinctrl_ndtr4_default: ndtr4_default { + function = "NDTR4"; + groups = "NDTR4"; + }; + + pinctrl_nri1_default: nri1_default { + function = "NRI1"; + groups = "NRI1"; + }; + + pinctrl_nri2_default: nri2_default { + function = "NRI2"; + groups = "NRI2"; + }; + + pinctrl_nri3_default: nri3_default { + function = "NRI3"; + groups = "NRI3"; + }; + + pinctrl_nri4_default: nri4_default { + function = "NRI4"; + groups = "NRI4"; + }; + + pinctrl_nrts1_default: nrts1_default { + function = "NRTS1"; + groups = "NRTS1"; + }; + + pinctrl_nrts2_default: nrts2_default { + function = "NRTS2"; + groups = "NRTS2"; + }; + + pinctrl_nrts3_default: nrts3_default { + function = "NRTS3"; + groups = "NRTS3"; + }; + + pinctrl_nrts4_default: nrts4_default { + function = "NRTS4"; + groups = "NRTS4"; + }; + + pinctrl_oscclk_default: oscclk_default { + function = "OSCCLK"; + groups = "OSCCLK"; + }; + + pinctrl_pewake_default: pewake_default { + function = "PEWAKE"; + groups = "PEWAKE"; + }; + + pinctrl_pnor_default: pnor_default { + function = "PNOR"; + groups = "PNOR"; + }; + + pinctrl_pwm0_default: pwm0_default { + function = "PWM0"; + groups = "PWM0"; + }; + + pinctrl_pwm1_default: pwm1_default { + function = "PWM1"; + groups = "PWM1"; + }; + + pinctrl_pwm2_default: pwm2_default { + function = "PWM2"; + groups = "PWM2"; + }; + + pinctrl_pwm3_default: pwm3_default { + function = "PWM3"; + groups = "PWM3"; + }; + + pinctrl_pwm4_default: pwm4_default { + function = "PWM4"; + groups = "PWM4"; + }; + + pinctrl_pwm5_default: pwm5_default { + function = "PWM5"; + groups = "PWM5"; + }; + + pinctrl_pwm6_default: pwm6_default { + function = "PWM6"; + groups = "PWM6"; + }; + + pinctrl_pwm7_default: pwm7_default { + function = "PWM7"; + groups = "PWM7"; + }; + + pinctrl_rgmii1_default: rgmii1_default { + function = "RGMII1"; + groups = "RGMII1"; + }; + + pinctrl_rgmii2_default: rgmii2_default { + function = "RGMII2"; + groups = "RGMII2"; + }; + + pinctrl_rmii1_default: rmii1_default { + function = "RMII1"; + groups = "RMII1"; + }; + + pinctrl_rmii2_default: rmii2_default { + function = "RMII2"; + groups = "RMII2"; + }; + + pinctrl_rxd1_default: rxd1_default { + function = "RXD1"; + groups = "RXD1"; + }; + + pinctrl_rxd2_default: rxd2_default { + function = "RXD2"; + groups = "RXD2"; + }; + + pinctrl_rxd3_default: rxd3_default { + function = "RXD3"; + groups = "RXD3"; + }; + + pinctrl_rxd4_default: rxd4_default { + function = "RXD4"; + groups = "RXD4"; + }; + + pinctrl_salt1_default: salt1_default { + function = "SALT1"; + groups = "SALT1"; + }; + + pinctrl_salt10_default: salt10_default { + function = "SALT10"; + groups = "SALT10"; + }; + + pinctrl_salt11_default: salt11_default { + function = "SALT11"; + groups = "SALT11"; + }; + + pinctrl_salt12_default: salt12_default { + function = "SALT12"; + groups = "SALT12"; + }; + + pinctrl_salt13_default: salt13_default { + function = "SALT13"; + groups = "SALT13"; + }; + + pinctrl_salt14_default: salt14_default { + function = "SALT14"; + groups = "SALT14"; + }; + + pinctrl_salt2_default: salt2_default { + function = "SALT2"; + groups = "SALT2"; + }; + + pinctrl_salt3_default: salt3_default { + function = "SALT3"; + groups = "SALT3"; + }; + + pinctrl_salt4_default: salt4_default { + function = "SALT4"; + groups = "SALT4"; + }; + + pinctrl_salt5_default: salt5_default { + function = "SALT5"; + groups = "SALT5"; + }; + + pinctrl_salt6_default: salt6_default { + function = "SALT6"; + groups = "SALT6"; + }; + + pinctrl_salt7_default: salt7_default { + function = "SALT7"; + groups = "SALT7"; + }; + + pinctrl_salt8_default: salt8_default { + function = "SALT8"; + groups = "SALT8"; + }; + + pinctrl_salt9_default: salt9_default { + function = "SALT9"; + groups = "SALT9"; + }; + + pinctrl_scl1_default: scl1_default { + function = "SCL1"; + groups = "SCL1"; + }; + + pinctrl_scl2_default: scl2_default { + function = "SCL2"; + groups = "SCL2"; + }; + + pinctrl_sd1_default: sd1_default { + function = "SD1"; + groups = "SD1"; + }; + + pinctrl_sd2_default: sd2_default { + function = "SD2"; + groups = "SD2"; + }; + + pinctrl_sda1_default: sda1_default { + function = "SDA1"; + groups = "SDA1"; + }; + + pinctrl_sda2_default: sda2_default { + function = "SDA2"; + groups = "SDA2"; + }; + + pinctrl_sgps1_default: sgps1_default { + function = "SGPS1"; + groups = "SGPS1"; + }; + + pinctrl_sgps2_default: sgps2_default { + function = "SGPS2"; + groups = "SGPS2"; + }; + + pinctrl_sioonctrl_default: sioonctrl_default { + function = "SIOONCTRL"; + groups = "SIOONCTRL"; + }; + + pinctrl_siopbi_default: siopbi_default { + function = "SIOPBI"; + groups = "SIOPBI"; + }; + + pinctrl_siopbo_default: siopbo_default { + function = "SIOPBO"; + groups = "SIOPBO"; + }; + + pinctrl_siopwreq_default: siopwreq_default { + function = "SIOPWREQ"; + groups = "SIOPWREQ"; + }; + + pinctrl_siopwrgd_default: siopwrgd_default { + function = "SIOPWRGD"; + groups = "SIOPWRGD"; + }; + + pinctrl_sios3_default: sios3_default { + function = "SIOS3"; + groups = "SIOS3"; + }; + + pinctrl_sios5_default: sios5_default { + function = "SIOS5"; + groups = "SIOS5"; + }; + + pinctrl_siosci_default: siosci_default { + function = "SIOSCI"; + groups = "SIOSCI"; + }; + + pinctrl_spi1_default: spi1_default { + function = "SPI1"; + groups = "SPI1"; + }; + + pinctrl_spi1cs1_default: spi1cs1_default { + function = "SPI1CS1"; + groups = "SPI1CS1"; + }; + + pinctrl_spi1debug_default: spi1debug_default { + function = "SPI1DEBUG"; + groups = "SPI1DEBUG"; + }; + + pinctrl_spi1passthru_default: spi1passthru_default { + function = "SPI1PASSTHRU"; + groups = "SPI1PASSTHRU"; + }; + + pinctrl_spi2ck_default: spi2ck_default { + function = "SPI2CK"; + groups = "SPI2CK"; + }; + + pinctrl_spi2cs0_default: spi2cs0_default { + function = "SPI2CS0"; + groups = "SPI2CS0"; + }; + + pinctrl_spi2cs1_default: spi2cs1_default { + function = "SPI2CS1"; + groups = "SPI2CS1"; + }; + + pinctrl_spi2miso_default: spi2miso_default { + function = "SPI2MISO"; + groups = "SPI2MISO"; + }; + + pinctrl_spi2mosi_default: spi2mosi_default { + function = "SPI2MOSI"; + groups = "SPI2MOSI"; + }; + + pinctrl_timer3_default: timer3_default { + function = "TIMER3"; + groups = "TIMER3"; + }; + + pinctrl_timer4_default: timer4_default { + function = "TIMER4"; + groups = "TIMER4"; + }; + + pinctrl_timer5_default: timer5_default { + function = "TIMER5"; + groups = "TIMER5"; + }; + + pinctrl_timer6_default: timer6_default { + function = "TIMER6"; + groups = "TIMER6"; + }; + + pinctrl_timer7_default: timer7_default { + function = "TIMER7"; + groups = "TIMER7"; + }; + + pinctrl_timer8_default: timer8_default { + function = "TIMER8"; + groups = "TIMER8"; + }; + + pinctrl_txd1_default: txd1_default { + function = "TXD1"; + groups = "TXD1"; + }; + + pinctrl_txd2_default: txd2_default { + function = "TXD2"; + groups = "TXD2"; + }; + + pinctrl_txd3_default: txd3_default { + function = "TXD3"; + groups = "TXD3"; + }; + + pinctrl_txd4_default: txd4_default { + function = "TXD4"; + groups = "TXD4"; + }; + + pinctrl_uart6_default: uart6_default { + function = "UART6"; + groups = "UART6"; + }; + + pinctrl_usbcki_default: usbcki_default { + function = "USBCKI"; + groups = "USBCKI"; + }; + + pinctrl_vgabiosrom_default: vgabiosrom_default { + function = "VGABIOSROM"; + groups = "VGABIOSROM"; + }; + + pinctrl_vgahs_default: vgahs_default { + function = "VGAHS"; + groups = "VGAHS"; + }; + + pinctrl_vgavs_default: vgavs_default { + function = "VGAVS"; + groups = "VGAVS"; + }; + + pinctrl_vpi24_default: vpi24_default { + function = "VPI24"; + groups = "VPI24"; + }; + + pinctrl_vpo_default: vpo_default { + function = "VPO"; + groups = "VPO"; + }; + + pinctrl_wdtrst1_default: wdtrst1_default { + function = "WDTRST1"; + groups = "WDTRST1"; + }; + + pinctrl_wdtrst2_default: wdtrst2_default { + function = "WDTRST2"; + groups = "WDTRST2"; + }; + + }; + }; + clk_hpll: clk_hpll@1e6e2024 { #clock-cells = <0>; compatible = "aspeed,g5-hpll-clock"; @@ -71,11 +903,27 @@ reg = <0x1e6e202c 0x4>; }; + gfx: display@1e6e6000 { + compatible = "aspeed,ast2500-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; + reg-io-width = <4>; + }; + sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x9000>; // 36K }; + gpio: gpio@1e780000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2500-gpio"; + reg = <0x1e780000 0x1000>; + interrupts = <20>; + gpio-ranges = <&pinctrl 0 0 220>; + interrupt-controller; + }; + timer: timer@1e782000 { compatible = "aspeed,ast2400-timer"; reg = <0x1e782000 0x90>; @@ -86,6 +934,7 @@ clocks = <&clk_apb>; }; + wdt1: wdt@1e785000 { compatible = "aspeed,wdt"; reg = <0x1e785000 0x1c>; @@ -115,6 +964,36 @@ status = "disabled"; }; + lpc: lpc@1e789000 { + compatible = "aspeed,ast2500-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e789000 0x1000>; + + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2500-lpc-bmc"; + reg = <0x0 0x80>; + }; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80 0x1e0>; + + reg-io-width = <4>; + + lhc: lhc@20 { + compatible = "aspeed,ast2500-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + }; + }; + uart2: serial@1e78d000 { compatible = "ns16550a"; reg = <0x1e78d000 0x1000>; diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi new file mode 100644 index 000000000000..0721c8472509 --- /dev/null +++ b/arch/arm/boot/dts/at91-linea.dtsi @@ -0,0 +1,49 @@ +/* + * at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module. + * + * Copyright (C) 2017 Axentia Technologies AB + * + * Author: Peter Rosin <peda@axentia.se> + * + * Licensed under GPLv2 or later. + */ + +#include "sama5d31.dtsi" + +/ { + compatible = "axentia,linea", + "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + memory { + reg = <0x20000000 0x4000000>; + }; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&main_xtal { + clock-frequency = <12000000>; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "st,24c64"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&nand0 { + status = "okay"; + + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 0b9a59d5fdac..9f7f8a7d8ff9 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -148,6 +148,8 @@ uart1: serial@f8020000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; + atmel,use-dma-rx; + atmel,use-dma-tx; status = "okay"; }; @@ -256,6 +258,8 @@ }; uart3: serial@fc008000 { + atmel,use-dma-rx; + atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_default>; status = "okay"; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index ed7fce297738..5ab14cedb1db 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -69,6 +69,12 @@ ahb { apb { + uart0: serial@f8004000 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; + spi0: spi@f8010000 { cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; status = "okay"; @@ -110,6 +116,8 @@ }; usart3: serial@fc00c000 { + atmel,use-dma-rx; + atmel,use-dma-tx; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts new file mode 100644 index 000000000000..669a2c6bdefc --- /dev/null +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -0,0 +1,274 @@ +/* + * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board + * + * Copyright (C) 2017 Axentia Technologies AB + * + * Author: Peter Rosin <peda@axentia.se> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include "at91-linea.dtsi" + +/ { + model = "Axentia TSE-850 3.0"; + compatible = "axentia,tse850v3", "axentia,linea", + "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + pinctrl@fffff200 { + tse850 { + pinctrl_usba_vbus: usba-vbus { + atmel,pins = + <AT91_PIOC 31 + AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + }; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + }; + + sck: oscillator { + compatible = "fixed-clock"; + + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "sck"; + }; + + reg_3v3: regulator { + compatible = "regulator-fixed"; + + regulator-name = "3v3-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ana: reg-ana { + compatible = "pwm-regulator"; + + regulator-name = "ANA"; + + pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>; + pwm-dutycycle-unit = <1000>; + pwm-dutycycle-range = <100 1000>; + + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <20000000>; + regulator-ramp-delay = <1000>; + }; + + sound { + compatible = "axentia,tse850-pcm5142"; + + axentia,cpu-dai = <&ssc0>; + axentia,audio-codec = <&pcm5142>; + + axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>; + axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>; + axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>; + + axentia,ana-supply = <&ana>; + }; + + dac: dpot-dac { + compatible = "dpot-dac"; + vref-supply = <®_3v3>; + io-channels = <&dpot 0>; + io-channel-names = "dpot"; + #io-channel-cells = <1>; + }; + + envelope-detector { + compatible = "axentia,tse850-envelope-detector"; + io-channels = <&dac 0>; + io-channel-names = "dac"; + + interrupt-parent = <&pioA>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "comp"; + }; + + leds { + compatible = "gpio-leds"; + + ch1-red { + label = "ch-1:red"; + gpios = <&pioA 23 GPIO_ACTIVE_LOW>; + }; + ch1-green { + label = "ch-1:green"; + gpios = <&pioA 22 GPIO_ACTIVE_LOW>; + }; + ch2-red { + label = "ch-2:red"; + gpios = <&pioA 21 GPIO_ACTIVE_LOW>; + }; + ch2-green { + label = "ch-2:green"; + gpios = <&pioA 20 GPIO_ACTIVE_LOW>; + }; + data-red { + label = "data:red"; + gpios = <&pioA 19 GPIO_ACTIVE_LOW>; + }; + data-green { + label = "data:green"; + gpios = <&pioA 18 GPIO_ACTIVE_LOW>; + }; + alarm-red { + label = "alarm:red"; + gpios = <&pioA 17 GPIO_ACTIVE_LOW>; + }; + alarm-green { + label = "alarm:green"; + gpios = <&pioA 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&nand0 { + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + barebox@40000 { + label = "bootloader"; + reg = <0x40000 0x60000>; + }; + + bareboxenv@c0000 { + label = "bareboxenv"; + reg = <0xc0000 0x40000>; + }; + + bareboxenv2@100000 { + label = "bareboxenv2"; + reg = <0x100000 0x40000>; + }; + + oftree@180000 { + label = "oftree"; + reg = <0x180000 0x20000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + + ovlfs@10000000 { + label = "ovlfs"; + reg = <0x10000000 0x10000000>; + }; +}; + +&ssc0 { + #sound-dai-cells = <0>; + + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + jc42@18 { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x18>; + }; + + dpot: mcp4651-104@28 { + compatible = "microchip,mcp4651-104"; + reg = <0x28>; + #io-channel-cells = <1>; + }; + + pcm5142: pcm5142@4c { + compatible = "ti,pcm5142"; + + reg = <0x4c>; + + AVDD-supply = <®_3v3>; + DVDD-supply = <®_3v3>; + CPVDD-supply = <®_3v3>; + + clocks = <&sck>; + + pll-in = <3>; + pll-out = <6>; + }; + + eeprom@50 { + compatible = "nxp,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&usart0 { + status = "okay"; + + atmel,use-dma-rx; +}; + +&pwm0 { + status = "okay"; + + pinctrl-0 = <&pinctrl_pwm0_pwml2_1>; + pinctrl-names = "default"; +}; + +&macb1 { + status = "okay"; + + phy-mode = "rgmii"; + + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@3 { + reg = <3>; + + interrupt-parent = <&pioE>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&usb0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>; +}; + +&usb1 { + status = "okay"; + + num-ports = <1>; + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; + atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>; +}; + +&usb2 { + status = "okay"; +}; + +&dbgu { + status = "okay"; + + dmas = <0>, <0>; /* Do not use DMA for dbgu */ +}; diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi index a9d6d593fc8a..47799f59faa5 100644 --- a/arch/arm/boot/dts/axm55xx.dtsi +++ b/arch/arm/boot/dts/axm55xx.dtsi @@ -62,7 +62,7 @@ #address-cells = <0>; interrupt-controller; reg = <0x20 0x01001000 0 0x1000>, - <0x20 0x01002000 0 0x1000>, + <0x20 0x01002000 0 0x2000>, <0x20 0x01004000 0 0x2000>, <0x20 0x01006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | diff --git a/arch/arm/boot/dts/axp223.dtsi b/arch/arm/boot/dts/axp223.dtsi new file mode 100644 index 000000000000..b91b6c1278c7 --- /dev/null +++ b/arch/arm/boot/dts/axp223.dtsi @@ -0,0 +1,58 @@ +/* + * Copyright 2016 Free Electrons + * + * Quentin Schulz <quentin.schulz@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP223 Integrated Power Management Chip + * http://www.x-powers.com/product/AXP22X.php + * http://dl.linux-sunxi.org/AXP/AXP223-en.pdf + * + * The AXP223 shares most of its logic with the AXP221 but it has some + * differences, for the VBUS driver for example. + */ + +#include "axp22x.dtsi" + +&usb_power_supply { + compatible = "x-powers,axp223-usb-power-supply"; +}; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 15f07f9af3b3..832795b0fd0f 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -209,6 +209,15 @@ #dma-cells = <1>; }; + sdio: sdhci@21000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x21000 0x100>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + sdhci,auto-cmd12; + clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>; + status = "disabled"; + }; + amac0: ethernet@22000 { compatible = "brcm,nsp-amac"; reg = <0x022000 0x1000>, @@ -227,6 +236,15 @@ status = "disabled"; }; + amac2: ethernet@24000 { + compatible = "brcm,nsp-amac"; + reg = <0x024000 0x1000>, + <0x112000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, @@ -241,29 +259,6 @@ brcm,nand-has-wp; }; - gpiob: gpio@30000 { - compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio"; - reg = <0x30000 0x50>; - #gpio-cells = <2>; - gpio-controller; - ngpios = <4>; - interrupt-controller; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - }; - - pwm: pwm@31000 { - compatible = "brcm,iproc-pwm"; - reg = <0x31000 0x28>; - clocks = <&osc>; - #pwm-cells = <3>; - status = "disabled"; - }; - - rng: rng@33000 { - compatible = "brcm,bcm-nsp-rng"; - reg = <0x33000 0x14>; - }; - qspi: qspi@27200 { compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; reg = <0x027200 0x184>, @@ -293,6 +288,29 @@ #size-cells = <0>; }; + gpiob: gpio@30000 { + compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio"; + reg = <0x30000 0x50>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <4>; + interrupt-controller; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + }; + + pwm: pwm@31000 { + compatible = "brcm,iproc-pwm"; + reg = <0x31000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + + rng: rng@33000 { + compatible = "brcm,bcm-nsp-rng"; + reg = <0x33000 0x14>; + }; + ccbtimer0: timer@34000 { compatible = "arm,sp804"; reg = <0x34000 0x1000>; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 6ddf7dfe3f72..38e6050035bc 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -87,3 +87,8 @@ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; status = "okay"; }; + +&vec { + power-domains = <&power RPI_POWER_DOMAIN_VEC>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 9a44da190897..a3106aa446c6 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -476,6 +476,14 @@ status = "disabled"; }; + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + status = "disabled"; + }; + pixelvalve@7e807000 { compatible = "brcm,bcm2835-pixelvalve2"; reg = <0x7e807000 0x100>; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 112a5a834ddc..d241cee4bfcc 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 3600f56f46f4..b0e62042f62f 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 9cb186ea2e97..c9ba6b964b38 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; }; spi { @@ -136,10 +137,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index 35e6ed6a3ef7..f591b0f256d8 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -55,10 +55,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &spi_nor { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 1c7e53d60aa4..50d65d8fbd9a 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -56,10 +56,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &spi_nor { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 8ce39d58eeb8..b9f66c0fae27 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -83,10 +84,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &usb3 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 6229ef283c41..ae0199f6c7a2 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 70f4bb9d864a..36b628b190d7 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -119,10 +120,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &spi_nor { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi index eed4dd159995..d0eec099f1f8 100644 --- a/arch/arm/boot/dts/bcm4708.dtsi +++ b/arch/arm/boot/dts/bcm4708.dtsi @@ -34,3 +34,7 @@ }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 71b98cfaf944..db8608be0ee7 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index a9c8defed4d3..d51586d95b9a 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; spi { @@ -122,7 +123,3 @@ }; }; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 184fd9214110..de041b8c3342 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; gpio-keys { diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts new file mode 100644 index 000000000000..9b5759849983 --- /dev/null +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -0,0 +1,60 @@ +/* + * Copyright 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" + +/ { + compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708"; + model = "Luxul XAP-1410 V1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts new file mode 100644 index 000000000000..c544ab302012 --- /dev/null +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -0,0 +1,107 @@ +/* + * Copyright 2017 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708"; + model = "Luxul XWR-1200 V1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + lan3 { + label = "bcm53xx:green:lan3"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + lan4 { + label = "bcm53xx:green:lan4"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + wan { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + lan2 { + label = "bcm53xx:green:lan2"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + usb { + label = "bcm53xx:green:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + 2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + 5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + lan1 { + label = "bcm53xx:green:lan1"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi index f720012ee5ed..c5f7619af4a6 100644 --- a/arch/arm/boot/dts/bcm47081.dtsi +++ b/arch/arm/boot/dts/bcm47081.dtsi @@ -24,3 +24,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index eac0f52e5ebd..eaca6876db0f 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index aab39c9864da..b32957ca9443 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index fd38d2aa3521..f459a98a72c6 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -101,6 +102,10 @@ }; }; -&uart0 { - status = "okay"; +&usb2 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 92f8a7219e98..8e39a84e5bf9 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -107,8 +108,52 @@ }; }; -&uart0 { - status = "okay"; +&pcie0 { + #address-cells = <3>; + #size-cells = <2>; + + bridge@0,0,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@0,1,0 { + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5735000 5835000>; + }; + }; +}; + +&pcie1 { + #address-cells = <3>; + #size-cells = <2>; + + bridge@1,0,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + bridge@1,1,0 { + reg = <0x0000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + bridge@1,2,2 { + reg = <0x1000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + wifi@1,4,0 { + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5170000 5730000>; + }; + }; + }; + }; }; &usb2 { diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index 9a92c24ac2d8..c67bfaa0c8e8 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -97,10 +97,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &usb2 { vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi index f03976597a6d..c645fea2b7f7 100644 --- a/arch/arm/boot/dts/bcm4709.dtsi +++ b/arch/arm/boot/dts/bcm4709.dtsi @@ -8,4 +8,5 @@ &uart0 { clock-frequency = <125000000>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 661348dbb7ce..64ded7643e9f 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -21,7 +21,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; nand: nand@18028000 { @@ -105,10 +106,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &usb3 { vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index 169b35fe5651..5cf4ab1ebe85 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -18,7 +18,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x08000000>; }; leds { @@ -31,13 +32,13 @@ }; lan3 { - label = "bcm53xx:green:lan1"; + label = "bcm53xx:green:lan3"; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-off"; }; lan4 { - label = "bcm53xx:green:lan0"; + label = "bcm53xx:green:lan4"; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-off"; }; @@ -49,7 +50,7 @@ }; lan1 { - label = "bcm53xx:green:lan3"; + label = "bcm53xx:green:lan1"; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-off"; }; @@ -98,10 +99,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &usb3 { vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 521b4155de60..600795ee1aed 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -18,7 +18,8 @@ }; memory { - reg = <0x00000000 0x08000000>; + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; }; leds { @@ -97,7 +98,3 @@ }; }; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi index 4f09aa0114e6..4840a782fc05 100644 --- a/arch/arm/boot/dts/bcm47094.dtsi +++ b/arch/arm/boot/dts/bcm47094.dtsi @@ -14,4 +14,5 @@ &uart0 { clock-frequency = <125000000>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index f09a2bb08979..4fbb089cf5ad 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -243,13 +243,39 @@ #gpio-cells = <2>; }; + pcie0: pcie@12000 { + reg = <0x00012000 0x1000>; + }; + + pcie1: pcie@13000 { + reg = <0x00013000 0x1000>; + }; + usb2: usb2@21000 { reg = <0x00021000 0x1000>; #address-cells = <1>; #size-cells = <1>; + ranges; + + interrupt-parent = <&gic>; + + ehci: ehci@21000 { + #usb-cells = <0>; + + compatible = "generic-ehci"; + reg = <0x00021000 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy>; + }; + + ohci: ohci@22000 { + #usb-cells = <0>; - phys = <&usb2_phy>; + compatible = "generic-ohci"; + reg = <0x00022000 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + }; }; usb3: usb3@23000 { @@ -257,6 +283,19 @@ #address-cells = <1>; #size-cells = <1>; + ranges; + + interrupt-parent = <&gic>; + + xhci: xhci@23000 { + #usb-cells = <0>; + + compatible = "generic-xhci"; + reg = <0x00023000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy>; + phy-names = "usb"; + }; }; spi@29000 { diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index e2c496a96c32..2da04d0a7348 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -124,6 +124,17 @@ reg = <0x4000 0x1000>; interrupt-parent = <&gic>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + ehci_port1: port@1 { + reg = <1>; + }; + + ehci_port2: port@2 { + reg = <2>; + }; }; ohci: ohci@d000 { @@ -133,6 +144,17 @@ reg = <0xd000 0x1000>; interrupt-parent = <&gic>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + ohci_port1: port@1 { + reg = <1>; + }; + + ohci_port2: port@2 { + reg = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 251a486f2da6..42855a7c1bfa 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -50,7 +50,3 @@ reg = <0x00000000 0x08000000>; }; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index b16cac92904f..95e8be65f2f1 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -50,7 +50,3 @@ reg = <0x00000000 0x08000000>; }; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 0a9abecf9423..decd86bae901 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -70,10 +70,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &spi_nor { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index 05a985a20378..bfd923096a8c 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -54,7 +54,6 @@ &uart0 { clock-frequency = <62499840>; - status = "okay"; }; &uart1 { diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index a21b0fd21f4e..3f04a40eb90c 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -65,7 +65,6 @@ status = "okay"; }; - &amac1 { status = "okay"; }; @@ -125,6 +124,40 @@ }; }; +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index be7f2f8ecf39..9fd542200d3d 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -65,7 +65,6 @@ status = "okay"; }; - &amac1 { status = "okay"; }; @@ -125,6 +124,40 @@ }; }; +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &sata_phy0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 959cde911c3c..41e7fd350fcd 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -59,6 +59,12 @@ }; }; +/* XHCI support needed to be complete */ + +&amac0 { + status = "okay"; +}; + &i2c0 { temperature-sensor@4c { compatible = "adi,adt7461a"; @@ -115,12 +121,6 @@ }; }; -/* XHCI, MMC, and Ethernet support needed to be complete */ - -&uart0 { - status = "okay"; -}; - &pcie0 { status = "okay"; }; @@ -129,6 +129,49 @@ status = "okay"; }; +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &sata_phy0 { status = "okay"; }; @@ -141,11 +184,10 @@ status = "okay"; }; -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&nand_sel>; - nand_sel: nand_sel { - function = "nand"; - groups = "nand_grp"; - }; +&sdio { + status = "ok"; +}; + +&uart0 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index ad2aa87dd15a..477c4860db52 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -65,6 +65,14 @@ status = "okay"; }; +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -120,6 +128,40 @@ }; }; +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &srab { compatible = "brcm,bcm58622-srab", "brcm,nsp-srab"; status = "okay"; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 4ceb8fef8041..c0a499d5ba44 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -65,6 +65,14 @@ status = "okay"; }; +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -120,6 +128,48 @@ }; }; +&sata_phy0 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &srab { compatible = "brcm,bcm58623-srab", "brcm,nsp-srab"; status = "okay"; @@ -165,14 +215,6 @@ }; }; -&sata_phy0 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index 442002597063..f7eb5854a224 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -1,7 +1,7 @@ /* * BSD LICENSE * - * Copyright (c) 2016 Broadcom. All rights reserved. + * Copyright(c) 2016 Broadcom. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -59,6 +59,18 @@ }; }; +&amac0 { + status = "okay"; +}; + +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -97,10 +109,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &pcie0 { status = "okay"; }; @@ -118,7 +126,49 @@ }; }; -&amac0 { +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { status = "okay"; }; @@ -167,14 +217,6 @@ }; }; -&sata_phy0 { - status = "okay"; -}; - -&sata_phy1 { - status = "okay"; -}; - -&sata { +&uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 59d96fb91583..f8d47e517e18 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -53,14 +53,6 @@ }; }; -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - &amac0 { status = "okay"; }; @@ -69,27 +61,7 @@ status = "okay"; }; -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&pcie2 { - status = "okay"; -}; - -&sata_phy0 { - status = "okay"; -}; - -&sata_phy1 { - status = "okay"; -}; - -&sata { +&amac2 { status = "okay"; }; @@ -112,32 +84,65 @@ reg = <0x00000000 0x00200000>; read-only; }; - partition@1 { + partition@200000 { label = "nenv"; reg = <0x00200000 0x00400000>; }; - partition@2 { + partition@600000 { label = "nsystem"; reg = <0x00600000 0x00a00000>; }; - partition@3 { + partition@1000000 { label = "nrootfs"; reg = <0x01000000 0x03000000>; }; - partition@4 { + partition@4000000 { label = "ncustfs"; reg = <0x04000000 0x3c000000>; }; }; }; +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; +}; + &pinctrl { pinctrl-names = "default"; - pinctrl-0 = <&nand_sel>; + pinctrl-0 = <&nand_sel>, <&gpiobs>, <&pwmc>; + nand_sel: nand_sel { function = "nand"; groups = "nand_grp"; }; + + gpiobs: gpiobs { + function = "gpio_b"; + groups = "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp", + "gpio_b_3_grp"; + }; + + pwmc: pwmc { + function = "pwm"; + groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"; + }; + + emmc_sel: emmc_sel { + function = "emmc"; + groups = "emmc_grp"; + }; +}; + +&pwm { + status = "okay"; }; &qspi { @@ -173,3 +178,81 @@ }; }; }; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +/* + * By default the sd slot is functional. For emmc to work add "<&emmc_sel>" + * and delete "<&nand_sel>" in "pinctrl-0" property of pinctrl node. Remove the + * bus-width property here and disable the nand node with status = "disabled";. + * + * Ex: pinctrl-0 = <&emmc_sel>, <&gpiobs>, <&pwmc>; + */ +&sdio { + bus-width = <4>; + no-1-8-v; + status = "ok"; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@5 { + ethernet = <&amac0>; + label = "cpu"; + reg = <5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 104afe98a43b..16666324fda8 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -65,6 +65,14 @@ status = "okay"; }; +&amac1 { + status = "okay"; +}; + +&amac2 { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -120,6 +128,40 @@ }; }; +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; + &sata_phy0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 78492a0bbbab..d15107cba765 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -290,3 +290,23 @@ }; }; }; + +&vpif { + pinctrl-names = "default"; + pinctrl-0 = <&vpif_capture_pins>; + status = "okay"; + + /* VPIF capture port */ + port { + vpif_ch0: endpoint@0 { + reg = <0>; + bus-width = <8>; + }; + + vpif_ch1: endpoint@1 { + reg = <1>; + bus-width = <8>; + data-shift = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index afcb4821deb1..b837fec70eec 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "da850.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "DA850/AM1808/OMAP-L138 LCDK"; @@ -51,6 +52,62 @@ system-clock-frequency = <24576000>; }; }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + user1 { + label = "GPIO Key USER1"; + linux,code = <BTN_0>; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + + user2 { + label = "GPIO Key USER2"; + linux,code = <BTN_1>; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + }; + + vga-bridge { + compatible = "ti,ths8135"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&lcdc_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + ddc-i2c-bus = <&i2c0>; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; }; &pmx_core { @@ -105,6 +162,10 @@ status = "okay"; }; +&sata { + status = "okay"; +}; + &mdio { pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; @@ -167,6 +228,10 @@ status = "okay"; }; +&usb1 { + status = "okay"; +}; + &aemif { pinctrl-names = "default"; pinctrl-0 = <&nand_pins>; @@ -236,3 +301,28 @@ &memctrl { status = "okay"; }; + +&lcdc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + port { + lcdc_out_vga: endpoint { + remote-endpoint = <&vga_bridge_in>; + }; + }; +}; + +&vpif { + pinctrl-names = "default"; + pinctrl-0 = <&vpif_capture_pins>; + status = "okay"; + + /* VPIF capture port */ + port { + vpif_ch0: endpoint { + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts new file mode 100644 index 000000000000..112ec92064ce --- /dev/null +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -0,0 +1,313 @@ +/* + * Device tree for LEGO MINDSTORMS EV3 + * + * Copyright (C) 2017 David Lechner <david@lechnology.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, version 2. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> + +#include "da850.dtsi" + +/ { + compatible = "lego,ev3", "ti,da850"; + model = "LEGO MINDSTORMS EV3"; + + aliases { + serial1 = &serial1; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x04000000>; + }; + + /* + * The buttons on the EV3 are mapped to keyboard keys. + */ + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + label = "EV3 Brick Buttons"; + pinctrl-names = "default"; + pinctrl-0 = <&button_pins>, <&button_bias>; + + center { + label = "Center"; + linux,code = <KEY_ENTER>; + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + }; + + left { + label = "Left"; + linux,code = <KEY_LEFT>; + gpios = <&gpio 102 GPIO_ACTIVE_HIGH>; + }; + + back { + label = "Back"; + linux,code = <KEY_BACKSPACE>; + gpios = <&gpio 106 GPIO_ACTIVE_HIGH>; + }; + + right { + label = "Right"; + linux,code = <KEY_RIGHT>; + gpios = <&gpio 124 GPIO_ACTIVE_HIGH>; + }; + + down { + label = "Down"; + linux,code = <KEY_DOWN>; + gpios = <&gpio 126 GPIO_ACTIVE_HIGH>; + }; + + up { + label = "Up"; + linux,code = <KEY_UP>; + gpios = <&gpio 127 GPIO_ACTIVE_HIGH>; + }; + }; + + /* + * The EV3 has two built-in bi-color LEDs behind the buttons. + */ + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + left_green { + label = "led0:green:brick-status"; + /* GP6[13] */ + gpios = <&gpio 103 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + right_red { + label = "led1:red:brick-status"; + /* GP6[7] */ + gpios = <&gpio 108 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + left_red { + label = "led0:red:brick-status"; + /* GP6[12] */ + gpios = <&gpio 109 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + right_green { + label = "led1:green:brick-status"; + /* GP6[14] */ + gpios = <&gpio 110 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + /* + * The EV3 is powered down by turning off the main 5V supply. + */ + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 107 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&system_power_pin>; + }; + + /* + * This is a 5V current limiting regulator that is shared by USB, + * the sensor (input) ports, the motor (output) ports and the A/DC. + */ + vcc5v: regulator1 { + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v_pins>; + compatible = "regulator-fixed"; + regulator-name = "vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 101 0>; + over-current-gpios = <&gpio 99 GPIO_ACTIVE_LOW>; + enable-active-high; + regulator-boot-on; + }; +}; + +&pmx_core { + status = "okay"; + + spi0_cs3_pin: pinmux_spi0_cs3_pin { + pinctrl-single,bits = < + /* CS3 */ + 0xc 0x01000000 0x0f000000 + >; + }; + + mmc0_cd_pin: pinmux_mmc0_cd { + pinctrl-single,bits = < + /* GP5[14] */ + 0x2C 0x00000080 0x000000f0 + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,bits = < + /* GP1[13] */ + 0x8 0x00000800 0x00000f00 + /* GP6[10] */ + 0x34 0x00800000 0x00f00000 + /* GP6[6] */ + 0x38 0x00000080 0x000000f0 + /* GP7[12], GP7[14], GP7[15] */ + 0x40 0x00808800 0x00f0ff00 + >; + }; + + led_pins: pinmux_led_pins { + pinctrl-single,bits = < + /* GP6[12], GP6[13], GP6[14] */ + 0x34 0x00008880 0x0000fff0 + /* GP6[7] */ + 0x38 0x00000008 0x0000000f + >; + }; + + system_power_pin: pinmux_system_power { + pinctrl-single,bits = < + /* GP6[11] */ + 0x34 0x00080000 0x000f0000 + >; + }; + + vcc5v_pins: pinmux_vcc5v { + pinctrl-single,bits = < + /* GP6[5] */ + 0x40 0x00000080 0x000000f0 + /* GP6[3] */ + 0x4c 0x00008000 0x0000f000 + >; + }; +}; + +&pinconf { + status = "okay"; + + /* Buttons have external pulldown resistors */ + button_bias: button-bias-groups { + disable { + groups = "cp5", "cp24", "cp25", "cp28"; + bias-disable; + }; + }; +}; + +/* Input port 1 */ +&serial1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&serial1_rxtx_pins>; +}; + +&rtc0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + /* + * EEPROM contains the first stage bootloader, HW ID and Bluetooth MAC. + */ + eeprom@50 { + compatible = "microchip,24c128"; + pagesize = <64>; + read-only; + reg = <0x50>; + }; +}; + +&wdt { + status = "okay"; +}; + +&mmc0 { + status = "okay"; + max-frequency = <50000000>; + bus-width = <4>; + cd-gpios = <&gpio 94 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin>; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>, <&spi0_cs3_pin>; + + flash@0 { + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + ti,spi-wdelay = <8>; + + /* Partitions are based on the official firmware from LEGO */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x40000>; + }; + + partition@40000 { + label = "U-Boot Env"; + reg = <0x40000 0x10000>; + }; + + partition@50000 { + label = "Kernel"; + reg = <0x50000 0x200000>; + }; + + partition@250000 { + label = "Filesystem"; + reg = <0x250000 0xa50000>; + }; + + partition@cb0000 { + label = "Storage"; + reg = <0xcb0000 0x2f0000>; + }; + }; + }; +}; + +&gpio { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&vcc5v>; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 104155d12c2f..92d633d1da68 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -208,7 +208,18 @@ 0x4c 0x02000022 0x0f0000ff >; }; - + vpif_capture_pins: vpif_capture_pins { + pinctrl-single,bits = < + /* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */ + 0x38 0x11111111 0xffffffff + /* VP_DIN[10..15,0..1] */ + 0x3c 0x11111111 0xffffffff + /* VP_DIN[8..9] */ + 0x40 0x00000011 0x000000ff + /* VP_CLKIN3, VP_CLKIN2 */ + 0x4c 0x00010100 0x000f0f00 + >; + }; }; prictrl: priority-controller@14110 { compatible = "ti,da850-mstpri"; @@ -266,22 +277,25 @@ interrupt-names = "edm3_tcerrint"; }; serial0: serial@42000 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; reg = <0x42000 0x100>; + reg-io-width = <4>; reg-shift = <2>; interrupts = <25>; status = "disabled"; }; serial1: serial@10c000 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; reg = <0x10c000 0x100>; + reg-io-width = <4>; reg-shift = <2>; interrupts = <53>; status = "disabled"; }; serial2: serial@10d000 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; reg = <0x10d000 0x100>; + reg-io-width = <4>; reg-shift = <2>; interrupts = <61>; status = "disabled"; @@ -324,6 +338,18 @@ dma-names = "rx", "tx"; status = "disabled"; }; + vpif: video@217000 { + compatible = "ti,da850-vpif"; + reg = <0x217000 0x1000>; + interrupts = <92>; + status = "disabled"; + + /* VPIF capture port */ + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; mmc1: mmc@21b000 { compatible = "ti,da830-mmc"; reg = <0x21b000 0x1000>; @@ -403,6 +429,12 @@ phy-names = "usb-phy"; status = "disabled"; }; + sata: sata@218000 { + compatible = "ti,da850-ahci"; + reg = <0x218000 0x2000>, <0x22c018 0x4>; + interrupts = <67>; + status = "disabled"; + }; mdio: mdio@224000 { compatible = "ti,davinci_mdio"; #address-cells = <1>; @@ -425,6 +457,14 @@ >; status = "disabled"; }; + usb1: usb@225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + status = "disabled"; + }; gpio: gpio@226000 { compatible = "ti,dm6441-gpio"; gpio-controller; @@ -458,10 +498,11 @@ dma-names = "tx", "rx"; }; - display: display@213000 { + lcdc: display@213000 { compatible = "ti,da850-tilcdc"; reg = <0x213000 0x1000>; interrupts = <52>; + max-pixelclock = <37500>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi index 59b4056b478f..9b9dfbe07be4 100644 --- a/arch/arm/boot/dts/dove-cm-a510.dtsi +++ b/arch/arm/boot/dts/dove-cm-a510.dtsi @@ -13,17 +13,17 @@ * published by the Free Software Foundation; version 2 of the * License. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts index 288e707dea99..2bb85a9b7614 100644 --- a/arch/arm/boot/dts/dove-sbc-a510.dts +++ b/arch/arm/boot/dts/dove-sbc-a510.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; version 2 of the * License. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 132f2be10889..4bc4b575c99b 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -21,6 +21,10 @@ reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; + chosen { + stdout-path = &uart1; + }; + evm_3v3_sd: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sd"; @@ -151,204 +155,6 @@ }; &dra7_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&vtt_pin>; - - vtt_pin: pinmux_vtt_pin { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ - DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ - >; - }; - - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ - DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ - >; - }; - - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ - DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ - >; - }; - - mcspi1_pins: pinmux_mcspi1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */ - DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */ - DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */ - DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ - DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ - DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ - >; - }; - - mcspi2_pins: pinmux_mcspi2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */ - DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ - DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ - DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ - >; - }; - - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */ - DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */ - DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */ - DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */ - >; - }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */ - DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */ - DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */ - DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ - DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ - >; - }; - - usb1_pins: pinmux_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ - >; - }; - - usb2_pins: pinmux_usb2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ - >; - }; - - nand_flash_x16: nand_flash_x16 { - /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch - * So NAND flash requires following switch settings: - * SW5.1 (NAND_BOOTn) = ON (LOW) - * SW5.9 (GPMC_WPN) = OFF (HIGH) - */ - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ - DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ - DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ - DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ - DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ - DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ - DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ - DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ - DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ - DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ - DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ - DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ - DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ - DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ - DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ - DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ - DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ - DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ - DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ - DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ - DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ - DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */ - DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */ - DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */ - DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */ - DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */ - DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */ - DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */ - DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */ - DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */ - DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */ - DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */ - DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */ - - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ - DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ - DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ - DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ - DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ - DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ - DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ - DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ - DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ - DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ - DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ - >; - - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 */ - DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15) - - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ - DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15) - >; - }; - dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ @@ -363,36 +169,36 @@ >; }; - atl_pins: pinmux_atl_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ - DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ - >; - }; - - mcasp3_pins: pinmux_mcasp3_pins { + mmc1_pins_default: mmc1_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ - DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ - DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ >; }; - mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { + mmc2_pins_default: mmc2_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ >; }; }; &i2c1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; tps659038: tps659038@58 { @@ -581,8 +387,6 @@ &i2c2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; pcf_hdmi: gpio@26 { @@ -602,45 +406,35 @@ &i2c3 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; }; &mcspi1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcspi1_pins>; }; &mcspi2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcspi2_pins>; }; &uart1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, <&dra7_pmx_core 0x3e0>; }; &uart2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; }; &uart3 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; }; &mmc1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; vmmc-supply = <&evm_3v3_sd>; vmmc_aux-supply = <&ldo1_reg>; bus-width = <4>; @@ -653,6 +447,8 @@ &mmc2 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; }; @@ -732,14 +528,10 @@ &usb1 { dr_mode = "peripheral"; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; }; &usb2 { dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_pins>; }; &elm { @@ -747,9 +539,12 @@ }; &gpmc { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_flash_x16>; + /* + * For the existing IOdelay configuration via U-Boot we don't + * support NAND on dra7-evm. Keep it disabled. Enabling it + * requires a different configuration by U-Boot. + */ + status = "disabled"; ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { compatible = "ti,omap2-nand"; @@ -845,9 +640,6 @@ &mac { status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_default>; - pinctrl-1 = <&cpsw_sleep>; dual_emac; }; @@ -863,12 +655,6 @@ dual_emac_res_vlan = <2>; }; -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_default>; - pinctrl-1 = <&davinci_mdio_sleep>; -}; - &dcan1 { status = "ok"; pinctrl-names = "default", "sleep", "active"; @@ -878,9 +664,6 @@ }; &atl { - pinctrl-names = "default"; - pinctrl-0 = <&atl_pins>; - assigned-clocks = <&abe_dpll_sys_clk_mux>, <&atl_gfclk_mux>, <&dpll_abe_ck>, @@ -899,9 +682,6 @@ &mcasp3 { #sound-dai-cells = <0>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mcasp3_pins>; - pinctrl-1 = <&mcasp3_sleep_pins>; assigned-clocks = <&mcasp3_ahclkx_mux>; assigned-clock-parents = <&atl_clkin2_ck>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 3e1f75026eac..2c9e56f4aac5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -57,7 +57,7 @@ interrupt-controller; #interrupt-cells = <3>; reg = <0x0 0x48211000 0x0 0x1000>, - <0x0 0x48212000 0x0 0x1000>, + <0x0 0x48212000 0x0 0x2000>, <0x0 0x48214000 0x0 0x2000>, <0x0 0x48216000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 2b9a5a8d69ad..4d57a55473af 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -138,6 +138,11 @@ }; }; +&pcf_lcd { + interrupt-parent = <&gpio7>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; +}; + &pcf_gpio_21 { interrupt-parent = <&gpio7>; interrupts = <31 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index e50fbeea96e0..ad24544adf0f 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -18,6 +18,10 @@ display0 = &hdmi0; }; + chosen { + stdout-path = &uart1; + }; + evm_12v0: fixedregulator-evm12v0 { /* main supply */ compatible = "regulator-fixed"; @@ -216,6 +220,15 @@ status = "okay"; clock-frequency = <400000>; + pcf_lcd: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + pcf_gpio_21: gpio@21 { compatible = "ti,pcf8575", "nxp,pcf8575"; reg = <0x21>; @@ -280,7 +293,12 @@ }; &gpmc { - status = "okay"; + /* + * For the existing IOdelay configuration via U-Boot we don't + * support NAND on dra72-evm. Keep it disabled. Enabling it + * requires a different configuration by U-Boot. + */ + status = "disabled"; ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { /* To use NAND, DIP switch SW5 must be set like so: diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 3f808a47df03..3ecac56bf504 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -68,6 +68,8 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; ti,min-output-impedance; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; }; dp83867_1: ethernet-phy@3 { @@ -76,5 +78,7 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; ti,min-output-impedance; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; }; }; diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts index 2ccbb57fbfa8..c15e7e0c7e08 100644 --- a/arch/arm/boot/dts/ecx-2000.dts +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -99,7 +99,7 @@ interrupt-controller; interrupts = <1 9 0xf04>; reg = <0xfff11000 0x1000>, - <0xfff12000 0x1000>, + <0xfff12000 0x2000>, <0xfff14000 0x2000>, <0xfff16000 0x2000>; }; diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi index f78c14c82e17..25186ac4188d 100644 --- a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi +++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi @@ -17,7 +17,7 @@ mfc_left: region_mfc_left { compatible = "shared-dma-pool"; no-map; - size = <0x1000000>; + size = <0x2400000>; alignment = <0x100000>; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index ba17ee1eb749..9c28ef4508e0 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -234,7 +234,7 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, + <0x10482000 0x2000>, <0x10484000 0x2000>, <0x10486000 0x2000>; interrupts = <GIC_PPI 9 diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index c64737baa45e..18def1c774d5 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -64,8 +64,10 @@ i2s0: i2s@03830000 { compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; - clocks = <&clock_audss EXYNOS_I2S_BUS>; - clock-names = "iis"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; #clock-cells = <1>; clock-output-names = "i2s_cdclk0"; dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>; @@ -100,18 +102,21 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; #power-domain-cells = <0>; + label = "MFC"; }; pd_g3d: g3d-power-domain@10023C60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; #power-domain-cells = <0>; + label = "G3D"; }; pd_lcd0: lcd0-power-domain@10023C80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; #power-domain-cells = <0>; + label = "LCD0"; }; pd_tv: tv-power-domain@10023C20 { @@ -119,24 +124,28 @@ reg = <0x10023C20 0x20>; #power-domain-cells = <0>; power-domains = <&pd_lcd0>; + label = "TV"; }; pd_cam: cam-power-domain@10023C00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; #power-domain-cells = <0>; + label = "CAM"; }; pd_gps: gps-power-domain@10023CE0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CE0 0x20>; #power-domain-cells = <0>; + label = "GPS"; }; pd_gps_alive: gps-alive-power-domain@10023D00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023D00 0x20>; #power-domain-cells = <0>; + label = "GPS alive"; }; gic: interrupt-controller@10490000 { @@ -370,19 +379,19 @@ #address-cells = <1>; #size-cells = <0>; port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; - status = "disabled"; + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; }; port@1 { - reg = <1>; - phys = <&exynos_usbphy 2>; - status = "disabled"; + reg = <1>; + phys = <&exynos_usbphy 2>; + status = "disabled"; }; port@2 { - reg = <2>; - phys = <&exynos_usbphy 3>; - status = "disabled"; + reg = <2>; + phys = <&exynos_usbphy 3>; + status = "disabled"; }; }; @@ -396,9 +405,9 @@ #address-cells = <1>; #size-cells = <0>; port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; - status = "disabled"; + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 7f3a18c8f60f..f9408188f97f 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -86,6 +86,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; + label = "LCD1"; }; l2c: l2-cache-controller@10502000 { diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi deleted file mode 100644 index 538901123d37..000000000000 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Samsung's Exynos4212 SoC device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212 - * based board files can include this file and provide values for board specfic - * bindings. - * - * Note: This file does not include device nodes for all the controllers in - * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional - * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include "exynos4x12.dtsi" - -/ { - compatible = "samsung,exynos4212", "samsung,exynos4"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@A00 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xA00>; - clocks = <&clock CLK_ARM_CLK>; - clock-names = "cpu"; - operating-points-v2 = <&cpu0_opp_table>; - cooling-min-level = <13>; - cooling-max-level = <7>; - #cooling-cells = <2>; /* min followed by max */ - }; - - cpu@A01 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xA01>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <900000>; - clock-latency-ns = <200000>; - }; - opp01 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <900000>; - clock-latency-ns = <200000>; - }; - opp02 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <925000>; - clock-latency-ns = <200000>; - }; - opp03 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <950000>; - clock-latency-ns = <200000>; - }; - opp04 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <975000>; - clock-latency-ns = <200000>; - }; - opp05 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <987500>; - clock-latency-ns = <200000>; - }; - opp06 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1000000>; - clock-latency-ns = <200000>; - }; - opp07 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = <1037500>; - clock-latency-ns = <200000>; - }; - opp08 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1087500>; - clock-latency-ns = <200000>; - }; - opp09 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1137500>; - clock-latency-ns = <200000>; - }; - opp10 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1187500>; - clock-latency-ns = <200000>; - }; - opp11 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1250000>; - clock-latency-ns = <200000>; - }; - opp12 { - opp-hz = /bits/ 64 <1400000000>; - opp-microvolt = <1287500>; - clock-latency-ns = <200000>; - }; - opp13 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1350000>; - clock-latency-ns = <200000>; - turbo-mode; - }; - }; -}; - -&combiner { - samsung,combiner-nr = <18>; -}; - -&gic { - cpu-offset = <0x8000>; -}; diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index 76d87f397178..d66093084dbb 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -82,17 +82,6 @@ compatible = "simple-audio-card"; simple-audio-card,name = "wm-sound"; - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <112896000>, - <11289600>; - simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&link0_codec>; simple-audio-card,frame-master = <&link0_codec>; @@ -145,6 +134,16 @@ status = "okay"; }; +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, <0>, <112896000>, <11289600>; +}; + &ehci { status = "okay"; /* In order to reset USB ethernet */ @@ -198,10 +197,6 @@ pinctrl-0 = <&i2s0_bus>; pinctrl-names = "default"; status = "okay"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; }; &pinctrl_1 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 8aa19ba14436..78f118cb73d4 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -43,16 +43,6 @@ sound: sound { compatible = "simple-audio-card"; - assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>, - <&clock_audss EXYNOS_DOUT_SRP>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>, - <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-rates = <0>, - <0>, - <192000000>, - <19200000>; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&link0_codec>; @@ -97,11 +87,11 @@ thermal-zones { cpu_thermal: cpu-thermal { cooling-maps { - map0 { + cooling_map0: map0 { /* Corresponds to 800MHz at freq_table */ cooling-device = <&cpu0 7 7>; }; - map1 { + cooling_map1: map1 { /* Corresponds to 200MHz at freq_table */ cooling-device = <&cpu0 13 13>; }; @@ -157,6 +147,16 @@ status = "okay"; }; +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, <0>, <192000000>, <19200000>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; @@ -503,10 +503,6 @@ pinctrl-0 = <&i2s0_bus>; pinctrl-names = "default"; status = "okay"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; }; &mixer { diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 99634c54dca9..7504a5aa538e 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -13,6 +13,7 @@ /dts-v1/; #include "exynos4412-odroid-common.dtsi" +#include "exynos4412-prime.dtsi" / { model = "Hardkernel ODROID-U3 board based on Exynos4412"; @@ -47,11 +48,11 @@ cooling-maps { map0 { trip = <&cpu_alert1>; - cooling-device = <&cpu0 7 7>; + cooling-device = <&cpu0 9 9>; }; map1 { trip = <&cpu_alert2>; - cooling-device = <&cpu0 13 13>; + cooling-device = <&cpu0 15 15>; }; map2 { trip = <&cpu_alert0>; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 153a75fe6e24..46b931eec228 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -100,3 +100,16 @@ &serial_3 { status = "okay"; }; + +&sound { + simple-audio-card,name = "Odroid-X"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Microphone", "Mic Jack", + "Microphone", "DMIC"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "IN1", "Mic Jack", + "Mic Jack", "MICBIAS"; +}; diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts index 4d228858f172..d867b2ee95ca 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx2.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts @@ -12,6 +12,7 @@ */ #include "exynos4412-odroidx.dts" +#include "exynos4412-prime.dtsi" / { model = "Hardkernel ODROID-X2 board based on Exynos4412"; @@ -22,27 +23,3 @@ reg = <0x40000000 0x7FF00000>; }; }; - -/* VDDQ for MSHC (eMMC card) */ -&buck8_reg { - regulator-name = "BUCK8_VDDQ_MMC4_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; -}; - -&mshc_0 { - vqmmc-supply = <&buck8_reg>; -}; - -&sound { - simple-audio-card,name = "Odroid-X2"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Microphone", "Mic Jack", - "Microphone", "DMIC"; - simple-audio-card,routing = - "Headphone Jack", "HPL", - "Headphone Jack", "HPR", - "IN1", "Mic Jack", - "Mic Jack", "MICBIAS"; -}; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi index 2f866f6e5838..1d27c28564e4 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi @@ -1,10 +1,10 @@ /* - * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source + * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device + * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device * tree nodes are listed in this file. * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi new file mode 100644 index 000000000000..e75bc170c89c --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi @@ -0,0 +1,41 @@ +/* + * Samsung's Exynos4412 Prime SoC device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Exynos4412 Prime SoC revision supports higher CPU frequencies than + * non-Prime version. Therefore we need to update OPPs table and + * thermal maps accordingly. + */ + +&cpu0_opp_1500 { + /delete-property/turbo-mode; +}; + +&cpu0_opp_table { + opp@1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1350000>; + clock-latency-ns = <200000>; + }; + opp@1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <1350000>; + clock-latency-ns = <200000>; + }; +}; + +&cooling_map0 { + cooling-device = <&cpu0 9 9>; +}; + +&cooling_map1 { + cooling-device = <&cpu0 15 15>; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 40beede46e55..235bbb69ad7c 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -17,11 +17,23 @@ * published by the Free Software Foundation. */ -#include "exynos4x12.dtsi" +#include "exynos4.dtsi" +#include "exynos4412-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { compatible = "samsung,exynos4412", "samsung,exynos4"; + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + fimc-lite0 = &fimc_lite_0; + fimc-lite1 = &fimc_lite_1; + mshc0 = &mshc_0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -130,7 +142,7 @@ opp-microvolt = <1287500>; clock-latency-ns = <200000>; }; - opp@1500000000 { + cpu0_opp_1500: opp@1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; @@ -138,19 +150,573 @@ }; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x40000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + + pd_isp: isp-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + #power-domain-cells = <0>; + label = "ISP"; + }; + + l2c: l2-cache-controller@10502000 { + compatible = "arm,pl310-cache"; + reg = <0x10502000 0x1000>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <2 2 1>; + arm,data-latency = <3 2 1>; + arm,double-linefill = <1>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <1>; + arm,prefetch-drop = <1>; + arm,prefetch-offset = <7>; + }; + + clock: clock-controller@10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, + <1 &combiner 12 5>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + adc: adc@126C0000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x126C0000 0x100>; + interrupt-parent = <&combiner>; + interrupts = <10 3>; + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + g2d: g2d@10800000 { + compatible = "samsung,exynos4212-g2d"; + reg = <0x10800000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; + clock-names = "sclk_fimg2d", "fimg2d"; + iommus = <&sysmmu_g2d>; + }; + + camera { + clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, + <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + + /* fimc_[0-3] are configured outside, under phandles */ + fimc_lite_0: fimc-lite@12390000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x12390000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_FIMC_LITE0>; + clock-names = "flite"; + iommus = <&sysmmu_fimc_lite0>; + status = "disabled"; + }; + + fimc_lite_1: fimc-lite@123A0000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x123A0000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_FIMC_LITE1>; + clock-names = "flite"; + iommus = <&sysmmu_fimc_lite1>; + status = "disabled"; + }; + + fimc_is: fimc-is@12000000 { + compatible = "samsung,exynos4212-fimc-is"; + reg = <0x12000000 0x260000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_FIMC_LITE0>, + <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>, + <&clock CLK_PPMUISPMX>, + <&clock CLK_MOUT_MPLL_USER_T>, + <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>, + <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>, + <&clock CLK_GICISP>, <&clock CLK_MCUCTL_ISP>, + <&clock CLK_PWM_ISP>, + <&clock CLK_DIV_ISP0>, <&clock CLK_DIV_ISP1>, + <&clock CLK_DIV_MCUISP0>, + <&clock CLK_DIV_MCUISP1>, + <&clock CLK_UART_ISP_SCLK>, + <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>, + <&clock CLK_ACLK400_MCUISP>, + <&clock CLK_DIV_ACLK400_MCUISP>; + clock-names = "lite0", "lite1", "ppmuispx", + "ppmuispmx", "mpll", "isp", + "drc", "fd", "mcuisp", + "gicisp", "mcuctl_isp", "pwm_isp", + "ispdiv0", "ispdiv1", "mcuispdiv0", + "mcuispdiv1", "uart", "aclk200", + "div_aclk200", "aclk400mcuisp", + "div_aclk400mcuisp"; + iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, + <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; + iommu-names = "isp", "drc", "fd", "mcuctl"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + pmu@10020000 { + reg = <0x10020000 0x3000>; + }; + + i2c1_isp: i2c-isp@12140000 { + compatible = "samsung,exynos4212-i2c-isp"; + reg = <0x12140000 0x100>; + clocks = <&clock CLK_I2C1_ISP>; + clock-names = "i2c_isp"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + mshc_0: mmc@12550000 { + compatible = "samsung,exynos4412-dw-mshc"; + reg = <0x12550000 0x1000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <0x80>; + clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>; + clock-names = "biu", "ciu"; + status = "disabled"; + }; + + sysmmu_g2d: sysmmu@10A40000{ + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 7>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_isp: sysmmu@12260000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12260000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 2>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_ISP>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_drc: sysmmu@12270000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12270000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 3>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_DRC>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_fd: sysmmu@122A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122A0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 4>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FD>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_mcuctl: sysmmu@122B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 5>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_ISPCX>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite0: sysmmu@123B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 0>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite1: sysmmu@123C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 1>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>; + #iommu-cells = <0>; + }; + + bus_dmc: bus_dmc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + status = "disabled"; + }; + + bus_acp: bus_acp { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_ACP>; + clock-names = "bus"; + operating-points-v2 = <&bus_acp_opp_table>; + status = "disabled"; + }; + + bus_c2c: bus_c2c { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_C2C>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + status = "disabled"; + }; + + bus_dmc_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <900000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <900000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <900000>; + }; + opp@267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <950000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1050000>; + }; + }; + + bus_acp_opp_table: opp_table2 { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp@267000000 { + opp-hz = /bits/ 64 <267000000>; + }; + }; + + bus_leftbus: bus_leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_rightbus: bus_rightbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDR>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_display: bus_display { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK160>; + clock-names = "bus"; + operating-points-v2 = <&bus_display_opp_table>; + status = "disabled"; + }; + + bus_fsys: bus_fsys { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK133>; + clock-names = "bus"; + operating-points-v2 = <&bus_fsys_opp_table>; + status = "disabled"; + }; + + bus_peri: bus_peri { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK100>; + clock-names = "bus"; + operating-points-v2 = <&bus_peri_opp_table>; + status = "disabled"; + }; + + bus_mfc: bus_mfc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_SCLK_MFC>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; + + bus_leftbus_opp_table: opp_table3 { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <900000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <925000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <950000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1000000>; + }; + }; + + bus_display_opp_table: opp_table4 { + compatible = "operating-points-v2"; + opp-shared; + + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + }; + + bus_fsys_opp_table: opp_table5 { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + }; + + bus_peri_opp_table: opp_table6 { + compatible = "operating-points-v2"; + opp-shared; + + opp@50000000 { + opp-hz = /bits/ 64 <50000000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + }; + pmu { interrupts = <2 2>, <3 2>, <18 2>, <19 2>; }; }; -&pmu_system_controller { - compatible = "samsung,exynos4412-pmu", "syscon"; -}; - &combiner { samsung,combiner-nr = <20>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; +}; + +&exynos_usbphy { + compatible = "samsung,exynos4x12-usb2-phy"; + samsung,sysreg-phandle = <&sys_reg>; +}; + +&fimc_0 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; +}; + +&fimc_1 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; +}; + +&fimc_2 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; + samsung,cam-if; +}; + +&fimc_3 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; }; &gic { cpu-offset = <0x4000>; }; + +&hdmi { + compatible = "samsung,exynos4212-hdmi"; +}; + +&jpeg_codec { + compatible = "samsung,exynos4212-jpeg"; +}; + +&rotator { + compatible = "samsung,exynos4212-rotator"; +}; + +&mixer { + compatible = "samsung,exynos4212-mixer"; + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; +}; + +&pinctrl_0 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; +}; + +&pinctrl_1 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&pinctrl_2 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x03860000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 0>; +}; + +&pinctrl_3 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x106E0000 0x1000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; +}; + +&pmu_system_controller { + compatible = "samsung,exynos4412-pmu", "syscon"; + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; + #clock-cells = <1>; +}; + +&tmu { + compatible = "samsung,exynos4412-tmu"; + interrupt-parent = <&combiner>; + interrupts = <2 4>; + reg = <0x100C0000 0x100>; + clocks = <&clock 383>; + clock-names = "tmu_apbif"; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi deleted file mode 100644 index 85a7122658f1..000000000000 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ /dev/null @@ -1,594 +0,0 @@ -/* - * Samsung's Exynos4x12 SoCs device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12 - * based board files can include this file and provide values for board specfic - * bindings. - * - * Note: This file does not include device nodes for all the controllers in - * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional - * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include "exynos4.dtsi" -#include "exynos4x12-pinctrl.dtsi" -#include "exynos4-cpu-thermal.dtsi" - -/ { - aliases { - pinctrl0 = &pinctrl_0; - pinctrl1 = &pinctrl_1; - pinctrl2 = &pinctrl_2; - pinctrl3 = &pinctrl_3; - fimc-lite0 = &fimc_lite_0; - fimc-lite1 = &fimc_lite_1; - mshc0 = &mshc_0; - }; - - sysram@02020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x40000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x40000>; - - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; - - smp-sysram@2f000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x2f000 0x1000>; - }; - }; - - pd_isp: isp-power-domain@10023CA0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023CA0 0x20>; - #power-domain-cells = <0>; - }; - - l2c: l2-cache-controller@10502000 { - compatible = "arm,pl310-cache"; - reg = <0x10502000 0x1000>; - cache-unified; - cache-level = <2>; - arm,tag-latency = <2 2 1>; - arm,data-latency = <3 2 1>; - arm,double-linefill = <1>; - arm,double-linefill-incr = <0>; - arm,double-linefill-wrap = <1>; - arm,prefetch-drop = <1>; - arm,prefetch-offset = <7>; - }; - - clock: clock-controller@10030000 { - compatible = "samsung,exynos4412-clock"; - reg = <0x10030000 0x20000>; - #clock-cells = <1>; - }; - - mct@10050000 { - compatible = "samsung,exynos4412-mct"; - reg = <0x10050000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; - clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, - <1 &combiner 12 5>, - <2 &combiner 12 6>, - <3 &combiner 12 7>, - <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - adc: adc@126C0000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x126C0000 0x100>; - interrupt-parent = <&combiner>; - interrupts = <10 3>; - clocks = <&clock CLK_TSADC>; - clock-names = "adc"; - #io-channel-cells = <1>; - io-channel-ranges; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; - - g2d: g2d@10800000 { - compatible = "samsung,exynos4212-g2d"; - reg = <0x10800000 0x1000>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; - clock-names = "sclk_fimg2d", "fimg2d"; - iommus = <&sysmmu_g2d>; - }; - - camera { - clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, - <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; - clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; - - /* fimc_[0-3] are configured outside, under phandles */ - fimc_lite_0: fimc-lite@12390000 { - compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x12390000 0x1000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_isp>; - clocks = <&clock CLK_FIMC_LITE0>; - clock-names = "flite"; - iommus = <&sysmmu_fimc_lite0>; - status = "disabled"; - }; - - fimc_lite_1: fimc-lite@123A0000 { - compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x123A0000 0x1000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_isp>; - clocks = <&clock CLK_FIMC_LITE1>; - clock-names = "flite"; - iommus = <&sysmmu_fimc_lite1>; - status = "disabled"; - }; - - fimc_is: fimc-is@12000000 { - compatible = "samsung,exynos4212-fimc-is"; - reg = <0x12000000 0x260000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_isp>; - clocks = <&clock CLK_FIMC_LITE0>, - <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>, - <&clock CLK_PPMUISPMX>, - <&clock CLK_MOUT_MPLL_USER_T>, - <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>, - <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>, - <&clock CLK_GICISP>, <&clock CLK_MCUCTL_ISP>, - <&clock CLK_PWM_ISP>, - <&clock CLK_DIV_ISP0>, <&clock CLK_DIV_ISP1>, - <&clock CLK_DIV_MCUISP0>, - <&clock CLK_DIV_MCUISP1>, - <&clock CLK_UART_ISP_SCLK>, - <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>, - <&clock CLK_ACLK400_MCUISP>, - <&clock CLK_DIV_ACLK400_MCUISP>; - clock-names = "lite0", "lite1", "ppmuispx", - "ppmuispmx", "mpll", "isp", - "drc", "fd", "mcuisp", - "gicisp", "mcuctl_isp", "pwm_isp", - "ispdiv0", "ispdiv1", "mcuispdiv0", - "mcuispdiv1", "uart", "aclk200", - "div_aclk200", "aclk400mcuisp", - "div_aclk400mcuisp"; - iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, - <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; - iommu-names = "isp", "drc", "fd", "mcuctl"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - status = "disabled"; - - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - - i2c1_isp: i2c-isp@12140000 { - compatible = "samsung,exynos4212-i2c-isp"; - reg = <0x12140000 0x100>; - clocks = <&clock CLK_I2C1_ISP>; - clock-names = "i2c_isp"; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; - - mshc_0: mmc@12550000 { - compatible = "samsung,exynos4412-dw-mshc"; - reg = <0x12550000 0x1000>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - fifo-depth = <0x80>; - clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>; - clock-names = "biu", "ciu"; - status = "disabled"; - }; - - sysmmu_g2d: sysmmu@10A40000{ - compatible = "samsung,exynos-sysmmu"; - reg = <0x10A40000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 7>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_isp: sysmmu@12260000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12260000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 2>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_ISP>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_drc: sysmmu@12270000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12270000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 3>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_DRC>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_fd: sysmmu@122A0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x122A0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 4>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FD>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_mcuctl: sysmmu@122B0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x122B0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 5>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_ISPCX>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_lite0: sysmmu@123B0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x123B0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 0>; - power-domains = <&pd_isp>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_lite1: sysmmu@123C0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x123C0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 1>; - power-domains = <&pd_isp>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>; - #iommu-cells = <0>; - }; - - bus_dmc: bus_dmc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_DMC>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - status = "disabled"; - }; - - bus_acp: bus_acp { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_ACP>; - clock-names = "bus"; - operating-points-v2 = <&bus_acp_opp_table>; - status = "disabled"; - }; - - bus_c2c: bus_c2c { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_C2C>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - status = "disabled"; - }; - - bus_dmc_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <900000>; - }; - opp@134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <900000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <900000>; - }; - opp@267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-microvolt = <950000>; - }; - opp@400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1050000>; - }; - }; - - bus_acp_opp_table: opp_table2 { - compatible = "operating-points-v2"; - opp-shared; - - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp@134000000 { - opp-hz = /bits/ 64 <134000000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - }; - opp@267000000 { - opp-hz = /bits/ 64 <267000000>; - }; - }; - - bus_leftbus: bus_leftbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDL>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_rightbus: bus_rightbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDR>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_display: bus_display { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK160>; - clock-names = "bus"; - operating-points-v2 = <&bus_display_opp_table>; - status = "disabled"; - }; - - bus_fsys: bus_fsys { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK133>; - clock-names = "bus"; - operating-points-v2 = <&bus_fsys_opp_table>; - status = "disabled"; - }; - - bus_peri: bus_peri { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK100>; - clock-names = "bus"; - operating-points-v2 = <&bus_peri_opp_table>; - status = "disabled"; - }; - - bus_mfc: bus_mfc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_SCLK_MFC>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_leftbus_opp_table: opp_table3 { - compatible = "operating-points-v2"; - opp-shared; - - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <900000>; - }; - opp@134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <925000>; - }; - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <950000>; - }; - opp@200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <1000000>; - }; - }; - - bus_display_opp_table: opp_table4 { - compatible = "operating-points-v2"; - opp-shared; - - opp@160000000 { - opp-hz = /bits/ 64 <160000000>; - }; - opp@200000000 { - opp-hz = /bits/ 64 <200000000>; - }; - }; - - bus_fsys_opp_table: opp_table5 { - compatible = "operating-points-v2"; - opp-shared; - - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp@134000000 { - opp-hz = /bits/ 64 <134000000>; - }; - }; - - bus_peri_opp_table: opp_table6 { - compatible = "operating-points-v2"; - opp-shared; - - opp@50000000 { - opp-hz = /bits/ 64 <50000000>; - }; - opp@100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - }; -}; - -&combiner { - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; -}; - -&exynos_usbphy { - compatible = "samsung,exynos4x12-usb2-phy"; - samsung,sysreg-phandle = <&sys_reg>; -}; - -&fimc_0 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,cam-if; -}; - -&fimc_1 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,cam-if; -}; - -&fimc_2 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,lcd-wb; - samsung,cam-if; -}; - -&fimc_3 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <1920 8192 1366 1920>; - samsung,rotators = <0>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,lcd-wb; -}; - -&hdmi { - compatible = "samsung,exynos4212-hdmi"; -}; - -&jpeg_codec { - compatible = "samsung,exynos4212-jpeg"; -}; - -&rotator { - compatible = "samsung,exynos4212-rotator"; -}; - -&mixer { - compatible = "samsung,exynos4212-mixer"; - clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; - clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, - <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; -}; - -&pinctrl_0 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; -}; - -&pinctrl_1 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11000000 0x1000>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - - wakup_eint: wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - }; -}; - -&pinctrl_2 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x03860000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <10 0>; -}; - -&pinctrl_3 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x106E0000 0x1000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; -}; - -&pmu_system_controller { - compatible = "samsung,exynos4212-pmu", "syscon"; - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", - "clkout4", "clkout8", "clkout9"; - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; - #clock-cells = <1>; -}; - -&tmu { - compatible = "samsung,exynos4412-tmu"; - interrupt-parent = <&combiner>; - interrupts = <2 4>; - reg = <0x100C0000 0x100>; - clocks = <&clock 383>; - clock-names = "tmu_apbif"; - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 7fd870ee5093..b74c5379ca26 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -90,11 +90,11 @@ }; gic: interrupt-controller@10481000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, + <0x10482000 0x2000>, <0x10484000 0x2000>, <0x10486000 0x2000>; interrupts = <GIC_PPI 9 diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index b6d7444d8585..79c9c885613a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -115,18 +115,21 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; #power-domain-cells = <0>; + label = "GSC"; }; pd_mfc: mfc-power-domain@10044040 { compatible = "samsung,exynos4210-pd"; reg = <0x10044040 0x20>; #power-domain-cells = <0>; + label = "MFC"; }; pd_disp1: disp1-power-domain@100440A0 { compatible = "samsung,exynos4210-pd"; reg = <0x100440A0 0x20>; #power-domain-cells = <0>; + label = "DISP1"; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_ACLK200_DISP1_SUB>, <&clock CLK_MOUT_ACLK300_DISP1_SUB>; @@ -1043,21 +1046,29 @@ &serial_0 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 13>, <&pdma0 14>; + dma-names = "rx", "tx"; }; &serial_1 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; }; &serial_2 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; }; &serial_3 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; }; #include "exynos5250-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 5818718618b1..5e88c9645975 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -167,7 +167,7 @@ #size-cells = <0>; interrupt-controller; reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, + <0x10482000 0x2000>, <0x10484000 0x2000>, <0x10486000 0x2000>; interrupts = <GIC_PPI 9 diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 2b6adafe18e2..7eab4bc07cec 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -340,21 +340,29 @@ &serial_0 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 13>, <&pdma0 14>; + dma-names = "rx", "tx"; }; &serial_1 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; }; &serial_2 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; }; &serial_3 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; }; &sss { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 906a1a42a7ea..7dc9dc82afd8 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -277,6 +277,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; #power-domain-cells = <0>; + label = "GSC"; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK300_GSCL>, <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; @@ -287,6 +288,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10044020 0x20>; #power-domain-cells = <0>; + label = "ISP"; }; mfc_pd: power-domain@10044060 { @@ -297,18 +299,21 @@ <&clock CLK_ACLK333>; clock-names = "oscclk", "clk0","asb0"; #power-domain-cells = <0>; + label = "MFC"; }; msc_pd: power-domain@10044120 { compatible = "samsung,exynos4210-pd"; reg = <0x10044120 0x20>; #power-domain-cells = <0>; + label = "MSC"; }; disp_pd: power-domain@100440C0 { compatible = "samsung,exynos4210-pd"; reg = <0x100440C0 0x20>; #power-domain-cells = <0>; + label = "DISP"; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK200_DISP1>, <&clock CLK_MOUT_USER_ACLK300_DISP1>, @@ -1406,21 +1411,29 @@ &serial_0 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 13>, <&pdma0 14>; + dma-names = "rx", "tx"; }; &serial_1 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; }; &serial_2 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; }; &serial_3 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; }; &sss { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 2a2e570bbee6..77d35bb92950 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -40,7 +40,7 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x2E1000 0x1000>, - <0x2E2000 0x1000>, + <0x2E2000 0x2000>, <0x2E4000 0x2000>, <0x2E6000 0x2000>; interrupts = <GIC_PPI 9 diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts index f50498659cc3..5ea28ee07cf4 100644 --- a/arch/arm/boot/dts/imx1-ads.dts +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -38,7 +38,6 @@ &cspi1 { pinctrl-0 = <&pinctrl_cspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index 2ee40bc9ec21..38d712be5685 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -51,8 +51,9 @@ #size-cells = <0>; #address-cells = <1>; - cpu: cpu@0 { + cpu@0 { device_type = "cpu"; + reg = <0>; compatible = "arm,arm920t"; operating-points = <200000 1900000>; clock-latency = <62500>; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 43ccbbf754a3..10d57f9cbb42 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -37,12 +37,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index acd475659156..e0ba55016a04 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -51,12 +51,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; @@ -568,7 +569,7 @@ reg = <0x53ffc000 0x4000>; clocks = <&clks 81>; clock-names = "ipg"; - interrupts = <25>; + interrupts = <25 56>; }; }; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index bba3f41b89ef..5f84b598e0d0 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -77,7 +77,6 @@ }; &cspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>; @@ -95,7 +94,6 @@ }; &cspi2 { - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts index 27846ff9bb0d..f56535768ee8 100644 --- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts @@ -81,7 +81,6 @@ &cspi1 { pinctrl-0 = <&pinctrl_cspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index d0ef496a1af8..96f442ba6d22 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -37,7 +37,6 @@ &cspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi2>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi index 1b6248079682..4f3e0f473581 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi @@ -23,7 +23,6 @@ }; &cspi1 { - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, <&gpio4 27 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index cf09e72aeb06..2a9198f99a8d 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -69,7 +69,6 @@ &cspi1 { pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, <&gpio4 27 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index b4e955e3be8d..82fec935ce83 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -75,7 +75,6 @@ &cspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index b397384248f4..15d85f1f85fd 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -73,6 +73,7 @@ cpu: cpu@0 { device_type = "cpu"; + reg = <0>; compatible = "arm,arm926ej-s"; operating-points = < /* kHz uV */ diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index d6a2190b60ef..148fcf4d3b98 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -48,12 +48,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; @@ -1078,6 +1079,7 @@ }; saif0: saif@80042000 { + #sound-dai-cells = <0>; compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; interrupts = <59>; @@ -1094,6 +1096,7 @@ }; saif1: saif@80046000 { + #sound-dai-cells = <0>; compatible = "fsl,imx28-saif"; reg = <0x80046000 0x2000>; interrupts = <58>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 23b0d2cf9acd..a72031407ebd 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -30,12 +30,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm1136jf-s"; device_type = "cpu"; + reg = <0>; }; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index d0496c65cea2..6d5e6a60bee7 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -35,12 +35,13 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm1136jf-s"; device_type = "cpu"; + reg = <0>; }; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index 27d763c7a307..dba2d951aa15 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -26,7 +26,6 @@ &cspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index 0f3fe29b816e..a5e6091c8729 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -80,7 +80,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -89,7 +88,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>, <&gpio3 27 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index f097b4f29ab4..873cf242679c 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -178,7 +178,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 16fc69c69ab2..b821066a0d2a 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -24,7 +24,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 728212861ece..1305b05c7ed9 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -114,7 +114,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index c05e7cfd0cbc..40b3e31935d0 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -215,16 +215,16 @@ pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 >; }; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 379939699164..f4c158cce908 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -90,7 +90,6 @@ ldo7_reg: ldo7 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; - regulator-always-on; }; ldo8_reg: ldo8 { @@ -113,3 +112,7 @@ }; }; }; + +&tve { + dac-supply = <&ldo7_reg>; +}; diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index 96d7eede412e..479ca4c9e384 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -130,8 +130,6 @@ regulator-name = "VDAC"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2775000>; - regulator-boot-on; - regulator-always-on; }; vgen1_reg: vgen1 { @@ -152,3 +150,7 @@ }; }; }; + +&tve { + dac-supply = <&vdac_reg>; +}; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 9f5190040555..472f6f0f55b3 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -63,7 +63,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 91a6a9ff50d7..85972f2201c2 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -55,7 +55,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <4>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio3 24 0>, <&gpio3 25 0>; status = "disabled"; @@ -249,7 +248,6 @@ &cspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi>; - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>, <&gpio1 21 0>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 57e75f1639e0..3a3220141988 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -161,7 +161,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; status = "okay"; cs-gpios = < diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi index ba689fbd0e41..524192cf6a0f 100644 --- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi @@ -129,7 +129,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <4>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts index bb92f309c191..0677625463d6 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts index 3d5ad2cc7e22..805b1318b7f7 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index d4c4a22db488..32a812b1839e 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -66,7 +66,6 @@ }; &ecspi2 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index e0c21727866d..26541538562c 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts index 2a43917d048e..f10a36b8647d 100644 --- a/arch/arm/boot/dts/imx6dl-cubox-i.dts +++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index d5c966031962..39c2602fa87c 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts new file mode 100644 index 000000000000..cf42c2f5cdc7 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-icore-rqs.dtsi" + +/ { + model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit"; + compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts index aec332c14af1..6de83c72bd72 100644 --- a/arch/arm/boot/dts/imx6dl-icore.dts +++ b/arch/arm/boot/dts/imx6dl-icore.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts index e0161e46195c..30ce2c0cec2b 100644 --- a/arch/arm/boot/dts/imx6dl-nit6xlite.dts +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 8398f979b912..ec53d7a09572 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts index 0f06ca5c9146..2f904527a097 100644 --- a/arch/arm/boot/dts/imx6dl-sabrelite.dts +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6dl-savageboard.dts b/arch/arm/boot/dts/imx6dl-savageboard.dts new file mode 100644 index 000000000000..b95469c520a4 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-savageboard.dts @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-savageboard.dtsi" + +/ { + model = "Poslab SavageBoard Dual"; + compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts index 85eddeb30e21..6ea0b780677d 100644 --- a/arch/arm/boot/dts/imx6dl-ts4900.dts +++ b/arch/arm/boot/dts/imx6dl-ts4900.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 0ea75f7b6039..88cc7f51a4e9 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 78bfc1a307d6..116bebb5e435 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 1dcaee23ed9c..33f5c436c09f 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 167f7446722a..d78514c92349 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 308e11cea1db..14fa6b25dc45 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -13,17 +13,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -133,7 +133,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index e4a415fd899b..36d6bb39593a 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -95,7 +95,6 @@ }; &ecspi5 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index a150bca84daa..d8a5789a4bc8 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -89,6 +89,14 @@ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + spdif-in; + }; }; &cpu0 { @@ -114,7 +122,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -222,6 +229,13 @@ >; }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; + pinctrl_uart4: uart4grp { fsl,pins = < MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 @@ -259,6 +273,12 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "okay"; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts index 353425edcdf4..b68aa0e57f20 100644 --- a/arch/arm/boot/dts/imx6q-cubox-i.dts +++ b/arch/arm/boot/dts/imx6q-cubox-i.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 908dab68bdca..f28883bbe7b1 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -104,7 +104,6 @@ &ecspi5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio1 12 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index 7c7c1a855ece..fd2220aa49e2 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -90,7 +90,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>; @@ -98,7 +97,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>, <&gpio4 26 GPIO_ACTIVE_LOW>; @@ -108,7 +106,6 @@ }; &ecspi5 { - fsl,spi-num-chipselects = <4>; cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>, <&gpio1 13 GPIO_ACTIVE_LOW>, <&gpio1 12 GPIO_ACTIVE_LOW>, diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 747bc104ad00..8e84713f42c0 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -138,7 +138,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts index 65e66f994f88..8f9252889971 100644 --- a/arch/arm/boot/dts/imx6q-h100.dts +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts index 1884c16784e2..69a7a0a1cb21 100644 --- a/arch/arm/boot/dts/imx6q-hummingboard.dts +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts index 005318865f66..e451b4ceb4d8 100644 --- a/arch/arm/boot/dts/imx6q-icore-rqs.dts +++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -45,7 +45,7 @@ #include "imx6qdl-icore-rqs.dtsi" / { - model = "Engicam i.CoreM6 Quad SOM"; + model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit"; compatible = "engicam,imx6-icore-rqs", "fsl,imx6q"; sound { diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts index 025f54350c28..59eb7adc2472 100644 --- a/arch/arm/boot/dts/imx6q-icore.dts +++ b/arch/arm/boot/dts/imx6q-icore.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index f7995c513b67..432291bedcf1 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -97,7 +97,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; - fsl,spi-num-chipselects = <1>; status = "okay"; m25p80@0 { diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts new file mode 100644 index 000000000000..eedbe737420c --- /dev/null +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -0,0 +1,473 @@ +/* + * Copyright 2016-2017 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/dts-v1/; + +#include "imx6q.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Liebherr (LWN) monitor6 i.MX6 Quad Board"; + compatible = "lwn,mccmon6", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm2 0 5000000 PWM_POLARITY_INVERTED>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 101 102 103 104 105 106 107 108 109 + 110 111 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 128 129 + 130 131 132 133 134 135 136 137 138 139 + 140 141 142 143 144 145 146 147 148 149 + 150 151 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 168 169 + 170 171 172 173 174 175 176 177 178 179 + 180 181 182 183 184 185 186 187 188 189 + 190 191 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 208 209 + 210 211 212 213 214 215 216 217 218 219 + 220 221 222 223 224 225 226 227 228 229 + 230 231 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 248 249 + 250 251 252 253 254 255>; + default-brightness-level = <50>; + enable-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + reg_lvds: regulator-lvds { + compatible = "regulator-fixed"; + regulator-name = "lvds_ppen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lvds>; + gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + panel-lvds0 { + compatible = "innolux,g121x1-l03"; + backlight = <&backlight_lvds>; + power-supply = <®_lvds>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>; + status = "okay"; + + s25sl032p: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pfuze100: pmic@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pwm2 { + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>; + ranges = <0 0 0x08000000 0x08000000>; + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + use-advanced-sector-protection; + fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000 + 0x0000c000 0x1404a38e 0x00000000>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_backlight: dispgrp { + fsl,pins = < + /* BLEN_OUT */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi3_cs: ecspi3csgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 + >; + }; + + pinctrl_ecspi3_flwp: ecspi3flwpgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x80000000 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_lvds: reqlvdsgrp { + fsl,pins = < + /* LVDS_PPEN_OUT */ + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + + pinctrl_weim_cs0: weimcs0grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + >; + }; + + pinctrl_weim_nor: weimnorgrp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 + MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0 + MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0 + MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0 + MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0 + MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0 + MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0 + MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0 + MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0 + MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0 + MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0 + MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0 + MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0 + MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0 + MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0 + MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0 + MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0 + MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1 + MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1 + MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1 + MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1 + MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1 + MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1 + MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1 + MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts index d417457ca6db..2a3c44f98eed 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts index cf4feefe02c5..c5d59baa1a07 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index d1686339dc48..df8ff397a914 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 758bca96786f..0fa32b2f3aec 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -210,7 +210,6 @@ &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3_novena>; - fsl,spi-num-chipselects = <3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 66d10d8d534c..02a7cdfd57c9 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-savageboard.dts b/arch/arm/boot/dts/imx6q-savageboard.dts new file mode 100644 index 000000000000..717ac62fc2cf --- /dev/null +++ b/arch/arm/boot/dts/imx6q-savageboard.dts @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-savageboard.dtsi" + +/ { + model = "Poslab SavageBoard Quad"; + compatible = "poslab,imx6q-savageboard", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/imx6q-ts4900.dts index 9b81ebc8b0d4..fab76f8cd076 100644 --- a/arch/arm/boot/dts/imx6q-ts4900.dts +++ b/arch/arm/boot/dts/imx6q-ts4900.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts index 22009947cebc..69bdd82ce21f 100644 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -59,6 +59,33 @@ rtc1 = &snvs_rtc; }; + encoder { + compatible = "ti,tfp410"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <¶llel_display_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -72,6 +99,19 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + + type = "a"; + ddc-i2c-bus = <&i2c_dvi_ddc>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + i2cmux { compatible = "i2c-mux-gpio"; pinctrl-names = "default"; @@ -105,8 +145,46 @@ #size-cells = <0>; }; }; + + parallel-display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + + interface-pix-fmt = "rgb24"; + + port@0 { + reg = <0>; + + parallel_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + parallel_display_out: endpoint { + remote-endpoint = <&tfp410_in>; + }; + }; + }; }; +/* + * A single IPU is not able to drive both display interfaces available on the + * Utilite Pro at high resolution due to its bandwidth limitation. Since the + * tfp410 encoder is wired up to IPU1, sever the link between IPU1 and the + * SoC-internal Designware HDMI encoder forcing the latter to be connected to + * IPU2 instead of IPU1. + */ +/delete-node/&ipu1_di0_hdmi; +/delete-node/&hdmi_mux_0; +/delete-node/&ipu1_di1_hdmi; +/delete-node/&hdmi_mux_1; + &hdmi { ddc-i2c-bus = <&i2c2>; status = "okay"; @@ -151,6 +229,39 @@ >; }; + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1 @@ -194,6 +305,10 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <¶llel_display_in>; +}; + &pcie { pcie@0,0 { reg = <0x000000 0 0 0 0>; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 8c8a049eb3d0..ba01dd76d887 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -175,7 +175,6 @@ /* Apalis SPI1 */ &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -184,7 +183,6 @@ /* Apalis SPI2 */ &ecspi2 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 5e7792d6bf58..550e100e85fc 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -176,7 +176,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 10 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index 54f4f0193f2b..b2debc0aa720 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -100,7 +100,6 @@ }; &ecspi4 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 20 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 7fff02c406f2..ec68f1cace31 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -114,7 +114,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <3>; cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH &gpio4 10 GPIO_ACTIVE_HIGH &gpio4 11 GPIO_ACTIVE_HIGH>; @@ -124,7 +123,6 @@ }; &ecspi2 { - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; @@ -132,7 +130,6 @@ }; &ecspi4 { - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index e6faa653f91a..e8078758f26c 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -138,7 +138,6 @@ /* Colibri SSP */ &ecspi4 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index ff41f83551de..14fff4ee6516 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index b2c083d57598..d78312c63672 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -29,7 +29,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index afec2c7628ef..e8c1edc82e6e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -56,38 +56,29 @@ status = "okay"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_5p0v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; @@ -158,6 +149,81 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -312,6 +378,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 54aca3a07ce4..91991d63a69c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -71,57 +71,37 @@ status = "okay"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_1p0v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - /* remove this fixed regulator once ltc3676__sw2 driver available */ - reg_1p8v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + reg_1p0v: regulator-1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - reg_3p3v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_5p0v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - reg_usb_otg_vbus: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { @@ -159,7 +139,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; @@ -233,6 +212,89 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_AUD_1P8: Audio codec */ + reg_aud_1p8v: ldo3 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -467,6 +529,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 88e5cb3b6be9..a208e7e0dc6e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -72,57 +72,37 @@ status = "okay"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_1p0v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - /* remove when pmic 1p8 regulator available */ - reg_1p8v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + reg_1p0v: regulator-1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - reg_3p3v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_usb_h1_vbus: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - reg_usb_otg_vbus: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { @@ -226,6 +206,87 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_AUD_1P8: Audio codec */ + reg_aud_1p8v: ldo3 { + regulator-name = "vdd1p8a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -456,6 +517,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 1753ab720b0b..968fda94d14b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -149,6 +149,13 @@ <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -499,6 +506,15 @@ >; }; + pinctrl_ecspi2: escpi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 4b9fef834822..405b40310ddf 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -78,34 +78,25 @@ reg = <0x10000000 0x20000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_5p0v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; - reg_usb_h1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; @@ -174,6 +165,89 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw2 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_3P3 (1+R1/R2 = 1.281) */ + reg_3p3: sw4 { + regulator-name = "vdd3p3"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <3647000>; + lltc,fb-voltage-divider = <200000 56200>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */ + reg_1p8a: ldo2 { + regulator-name = "vdd1p8a"; + regulator-min-microvolt = <1816125>; + regulator-max-microvolt = <1816125>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8b: HDMI In analog */ + reg_1p8b: ldo3 { + regulator-name = "vdd1p8b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -308,6 +382,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pwm2: pwm2grp { fsl,pins = < MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index ee83161f674b..67613dd7cc92 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -55,37 +55,28 @@ reg = <0x10000000 0x20000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_1p0v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; + reg_1p0v: regulator-1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - reg_3p3v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_5p0v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; }; }; @@ -148,6 +139,81 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */ + reg_1p8v: sw2 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw4 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ + reg_2p5v: ldo2 { + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -260,6 +326,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pwm2: pwm2grp { fsl,pins = < MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index 86cec0527f73..57374dddf98d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -92,14 +92,6 @@ status = "okay"; }; - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P0V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - reg_5p0v: regulator-5p0v { compatible = "regulator-fixed"; regulator-name = "5P0V"; @@ -179,6 +171,89 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_SOC (1+R1/R2 = 1.635) */ + reg_vdd_soc: sw1 { + regulator-name = "vddsoc"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw2 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.635) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_3P3 (1+R1/R2 = 1.281) */ + reg_3p3v: sw4 { + regulator-name = "vdd3p3"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <3647000>; + lltc,fb-voltage-divider = <200000 56200>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */ + reg_1p8a: ldo2 { + regulator-name = "vdd1p8a"; + regulator-min-microvolt = <1816125>; + regulator-max-microvolt = <1816125>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P8b: microSD VDD_1P8 */ + reg_1p8b: ldo3 { + regulator-name = "vdd1p8b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &i2c3 { @@ -255,7 +330,6 @@ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -327,6 +401,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index d6c2358ffad4..988334c889eb 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index d5c3aa88adbe..5fab5be414fe 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -223,7 +223,7 @@ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; vmcc-supply = <®_sd3_vmmc>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - bus-witdh=<4>; + bus-witdh = <4>; no-1-8-v; status = "okay"; }; @@ -234,7 +234,7 @@ pinctrl-1 = <&pinctrl_usdhc4_100mhz>; pinctrl-2 = <&pinctrl_usdhc4_200mhz>; vmcc-supply = <®_sd4_vmmc>; - bus-witdh=<8>; + bus-witdh = <8>; no-1-8-v; non-removable; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 023839a02dd0..55bebfc9ad94 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index 469ef58ce4bc..a9b207751a02 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -13,17 +13,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index 3d62401dbd7f..6a410160c9ee 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 63acd54f5278..6b81580623ff 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -209,7 +209,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -515,8 +514,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 47ba97229a48..bad3c9f9eeac 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -351,7 +351,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -739,8 +738,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { @@ -753,8 +750,6 @@ }; lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 31d4cc62dbc7..559da17297ef 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -282,7 +282,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -640,8 +639,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 26d060484728..70772ebadd4d 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -255,7 +255,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -579,8 +578,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index e9801a26f3b4..6e5cb6a99550 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -76,7 +76,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 24 0>; flash@0 { diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 17704a5c1bcb..5cf90c24c707 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -89,7 +89,6 @@ }; &ecspi2 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; @@ -97,7 +96,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 52390ba83e81..a2a714d199ea 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -124,7 +124,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 1f9076e271e4..84131794e97b 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -241,7 +241,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -525,8 +524,6 @@ status = "okay"; lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port@4 { diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 55ef53571fdd..63bf95ed8c88 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -160,7 +160,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 9 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi new file mode 100644 index 000000000000..a616e3c400d3 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi @@ -0,0 +1,255 @@ +/* + * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; + label = "Power Button"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + panel { + compatible = "avic,tm097tdh02", "hannstar,hsd100pxn1"; + backlight = <&panel_bl>; + power-supply = <®_3p3v>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + panel_bl: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <4>; + power-supply = <®_3p3v>; + pwms = <&pwm1 0 10000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&fec { + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + reg = <0>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +/* SD card */ +&usdhc3 { + bus-width = <4>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd>; + status = "okay"; +}; + +/* eMMC */ +&usdhc4 { + bus-width = <8>; + keep-power-in-suspend; + no-1-8-v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_emmc: emmcgrp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + /* PHY reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_sd: sdgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + /* CD pin */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi index 5c26b26e851a..267c956d8910 100644 --- a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -95,7 +95,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; @@ -109,7 +108,6 @@ }; &ecspi2 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 2bf2e623ac1e..1691714f13a2 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -221,7 +221,6 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - fsl,spi-num-chipselects = <2>; cs-gpios = < &gpio2 30 GPIO_ACTIVE_HIGH &gpio3 19 GPIO_ACTIVE_HIGH diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 6d37d9af5f1d..6d7bf6496117 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -634,8 +634,8 @@ regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; regulator-always-on; anatop-reg-offset = <0x110>; anatop-vol-bit-shift = <8>; @@ -662,15 +662,15 @@ regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; - regulator-min-microvolt = <2000000>; + regulator-min-microvolt = <2250000>; regulator-max-microvolt = <2750000>; regulator-always-on; anatop-reg-offset = <0x130>; anatop-vol-bit-shift = <8>; anatop-vol-bit-width = <5>; anatop-min-bit-val = <0>; - anatop-min-voltage = <2000000>; - anatop-max-voltage = <2750000>; + anatop-min-voltage = <2100000>; + anatop-max-voltage = <2875000>; }; reg_arm: regulator-vddcore { @@ -816,7 +816,7 @@ reg = <0x020e0000 0x4000>; }; - ldb: ldb@020e0008 { + ldb: ldb { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb"; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 0d4977ab7d29..24d071f5d9cd 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -95,6 +95,12 @@ }; }; +&fec { + /delete-property/interrupts-extended; + interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>, + <0 119 IRQ_TYPE_LEVEL_HIGH>; +}; + &ldb { clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index be118820e9f7..0a90eea17018 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -117,7 +117,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 11 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 9b817f3501a6..802da45aa551 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -142,7 +142,6 @@ }; &ecspi1 { - fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/imx6sx-sdb-sai.dts index 0155450d680e..2ac865b7c364 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-sai.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-sai.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi index 2b65d26f4396..49f466fe0b1d 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -75,6 +75,50 @@ regulator-max-microvolt = <3300000>; regulator-boot-on; }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_otg1_reg>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_otg2_reg>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_bt: regulator-bt { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_reg>; + enable-active-high; + gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>; + regulator-name = "bt_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; }; &cpu0 { @@ -86,6 +130,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; phy-mode = "rmii"; + phy-reset-duration = <10>; phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; }; @@ -186,6 +231,11 @@ }; &iomuxc { + pinctrl_bt_reg: btreggrp { + fsl,pins = + <MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>; + }; + pinctrl_enet1: enet1grp { fsl,pins = <MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>, @@ -223,6 +273,14 @@ <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>; }; + pinctrl_uart3: uart3grp { + fsl,pins = + <MX6SX_PAD_SD3_DATA4__UART3_RX 0x13059>, + <MX6SX_PAD_SD3_DATA5__UART3_TX 0x13059>, + <MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x13059>, + <MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x13059>; + }; + pinctrl_uart5: uart5grp { fsl,pins = <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>, @@ -241,6 +299,28 @@ <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>; }; + pinctrl_otg1_reg: otg1grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0>; + }; + + + pinctrl_otg2_reg: otg2grp { + fsl,pins = + <MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x10b0>; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059>, + <MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x10b0>; + }; + + pinctrl_usb_otg2: usbot2ggrp { + fsl,pins = + <MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x10b0>; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = <MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>, @@ -251,6 +331,19 @@ <MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>, <MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */ }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = + <MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x15059>, + <MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x13059>, + <MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17069>, + <MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17069>, + <MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17069>, + <MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17069>, + <MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17069>, + <MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10069>, + <MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x10059>; + }; }; &uart1 { @@ -266,6 +359,13 @@ status = "disabled"; }; +&uart3 { /* Bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + /* Arduino serial */ &uart5 { pinctrl-names = "default"; @@ -280,6 +380,21 @@ status = "disabled"; }; +&usbotg1 { /* J2 micro USB port */ + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + status = "okay"; +}; + +&usbotg2 { /* J3 host USB port */ + vbus-supply = <®_usb_otg2_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2>; + dr_mode = "host"; + status = "okay"; +}; + &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; @@ -291,3 +406,25 @@ wakeup-source; status = "okay"; }; + +&usdhc3 { /* Wi-Fi */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + vmmc-supply = <®_wlan>; + cap-power-off-card; + wakeup-source; + keep-power-in-suspend; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1831"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; + ref-clock-frequency = <38400000>; + tcxo-clock-frequency = <26000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/imx6ul-geam-kit.dts index 4c4af76143e3..142e60cab65f 100644 --- a/arch/arm/boot/dts/imx6ul-geam-kit.dts +++ b/arch/arm/boot/dts/imx6ul-geam-kit.dts @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dtsi index 64eb9ed59b9c..940aef67313b 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dtsi +++ b/arch/arm/boot/dts/imx6ul-geam.dtsi @@ -11,17 +11,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -30,11 +30,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts new file mode 100644 index 000000000000..f5b422898e61 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6ul-isiot.dtsi" + +/ { + model = "Engicam Is.IoT MX6UL eMMC Starter kit"; + compatible = "engicam,imx6ul-isiot", "fsl,imx6ul"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; + bus-width = <8>; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts new file mode 100644 index 000000000000..de15e1c75dd1 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6ul-isiot.dtsi" + +/ { + model = "Engicam Is.IoT MX6UL NAND Starter kit"; + compatible = "engicam,imx6ul-isiot", "fsl,imx6ul"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpmi_nand: gpmi-nand { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi new file mode 100644 index 000000000000..0b43699af3e3 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -0,0 +1,114 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6ul.dtsi" + +/ { + memory { + reg = <0x80000000 0x20000000>; + }; + + chosen { + stdout-path = &uart1; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-liteboard.dts b/arch/arm/boot/dts/imx6ul-liteboard.dts index 6e04cb9202f4..ed1d891d6a89 100644 --- a/arch/arm/boot/dts/imx6ul-liteboard.dts +++ b/arch/arm/boot/dts/imx6ul-liteboard.dts @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/imx6ul-litesom.dtsi index 461292d33417..039721d3dcb4 100644 --- a/arch/arm/boot/dts/imx6ul-litesom.dtsi +++ b/arch/arm/boot/dts/imx6ul-litesom.dtsi @@ -12,17 +12,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -31,11 +31,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi new file mode 100644 index 000000000000..51095df33a90 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi @@ -0,0 +1,192 @@ +/* + * Copyright 2017 Armadeus Systems <support@armadeus.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6ul.dtsi" + +/ { + memory { + reg = <0x80000000 0>; /* will be filled by U-Boot */ + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-reset-duration = <1>; + phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy1>; + phy-supply = <®_3v3>; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; + }; +}; + +/* Bluetooth */ +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8>; + uart-has-rtscts; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +/* WiFi */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc3_pwrseq>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio2>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + /* INT# */ + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 + /* RST# */ + MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_uart8: uart8grp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0 + /* BT_REG_ON */ + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0 + MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0 + MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0 + MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0 + MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0 + MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0 + /* WL_REG_ON */ + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0 + /* WL_IRQ */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts new file mode 100644 index 000000000000..0e59ee57fd55 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts @@ -0,0 +1,412 @@ +/* + * Copyright 2017 Armadeus Systems <support@armadeus.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6ul-opos6ul.dtsi" + +/ { + model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board"; + compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 191000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_5v>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + user-button { + label = "User button"; + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + user-led { + label = "User"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + onewire { + compatible = "w1-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_w1>; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg1_vbus: regulator-usbotg1vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg1vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg2_vbus: regulator-usbotg2vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg2vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2_vbus>; + gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adc1 { + vref-supply = <®_3v3>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_5v>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_5v>; + status = "okay"; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <5000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <5000000>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock_frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock_frequency = <400000>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + display = <&display0>; + lcd-supply = <®_3v3>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + timing0: timing0 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xffff>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_id>; + vbus-supply = <®_usbotg1_vbus>; + dr_mode = "otg"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbotg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios>; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0 + MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0 + MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0 + MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0 + MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 + >; + }; + + pinctrl_gpios: gpiosgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0 + MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0 + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0 + MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0 + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + >; + }; + + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1 + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0 + >; + }; + + pinctrl_usbotg1_vbus: usbotg1vbusgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0 + >; + }; + + pinctrl_usbotg2_vbus: usbotg2vbusgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; + + pinctrl_w1: w1grp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 827d9e8fc74e..7d7254b12a75 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -14,17 +14,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index 530e9ca13a74..c784a0b75ca0 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -285,7 +285,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - fsl,spi-num-chipselects = <2>; cs-gpios = < &gpio1 29 GPIO_ACTIVE_HIGH &gpio1 10 GPIO_ACTIVE_HIGH diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 53d3f8e41e9b..b9d7d2d09402 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -99,11 +99,11 @@ }; intc: interrupt-controller@00a01000 { - compatible = "arm,cortex-a7-gic"; + compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x00a01000 0x1000>, - <0x00a02000 0x1000>, + <0x00a02000 0x2000>, <0x00a04000 0x2000>, <0x00a06000 0x2000>; }; @@ -542,7 +542,6 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; - anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { @@ -859,6 +858,12 @@ reg = <0x021b0000 0x4000>; }; + ocotp: ocotp-ctrl@021bc000 { + compatible = "fsl,imx6ul-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6UL_CLK_OCOTP>; + }; + lcdif: lcdif@021c8000 { compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; reg = <0x021c8000 0x4000>; diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts index db5bc076e1cc..4741871434dd 100644 --- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index dee8ab8135e1..0c182917b863 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index a9cc65725f19..a171545478be 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -596,29 +596,29 @@ pinctrl_gpio_lpsr: gpio1-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x59 - MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x59 - MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x59 + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x59 + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59 + MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59 >; }; pinctrl_i2c1: i2c1-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x4000007f - MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f + MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f + MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x4000007f >; }; pinctrl_cd_usdhc1: usdhc1-cd-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ + MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ >; }; pinctrl_uart1_ctrl2: uart1-ctrl2-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */ - MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */ + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */ + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */ >; }; }; diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 58b09bf1ba2d..ae45af1ad062 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -261,12 +261,6 @@ >; }; - pinctrl_usbotg1: usbotg1grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ - >; - }; - pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 @@ -283,3 +277,11 @@ >; }; }; + +&iomuxc_lpsr { + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ + >; + }; +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index ce08f180f213..5d98e2b5d54b 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -712,33 +712,33 @@ pinctrl_hog_2: hoggrp-2 { fsl,pins = < - MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x7d - MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x7d + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x7d + MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x7d >; }; pinctrl_backlight_j9: backlightj9grp { fsl,pins = < - MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x7d + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x7d >; }; pinctrl_pwm1: pwm1grp { fsl,pins = < - MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x7d + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x7d >; }; pinctrl_usbotg1: usbotg1grp { fsl,pins = < - MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x7d - MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 + MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x7d + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 >; }; pinctrl_wdog1: wdog1grp { fsl,pins = < - MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x75 + MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x75 >; }; }; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index 7bc3c00e56c6..f6f7e78f8820 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -15,61 +15,61 @@ * <mux_reg conf_reg input_reg mux_mode input_val> */ -#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 -#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 -#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 -#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0 -#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3 -#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0 -#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3 -#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3 -#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0 -#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3 -#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 -#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 -#define MX7D_PAD_GPIO1_IO04__UART5_DCE_CTS 0x0010 0x0040 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO04__UART5_DTE_RTS 0x0010 0x0040 0x0710 0x3 0x4 -#define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 -#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 -#define MX7D_PAD_GPIO1_IO05__UART5_DCE_RTS 0x0014 0x0044 0x0710 0x3 0x5 -#define MX7D_PAD_GPIO1_IO05__UART5_DTE_CTS 0x0014 0x0044 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 -#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 -#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 -#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 -#define MX7D_PAD_GPIO1_IO06__UART5_DCE_RX 0x0018 0x0048 0x0714 0x3 0x4 -#define MX7D_PAD_GPIO1_IO06__UART5_DTE_TX 0x0018 0x0048 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 -#define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 -#define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 -#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 -#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 -#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 -#define MX7D_PAD_GPIO1_IO07__UART5_DCE_TX 0x001C 0x004C 0x0000 0x3 0x0 -#define MX7D_PAD_GPIO1_IO07__UART5_DTE_RX 0x001C 0x004C 0x0714 0x3 0x5 -#define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 -#define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 -#define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3 +#define MX7D_PAD_LPSR_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3 +#define MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3 +#define MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3 +#define MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DCE_CTS 0x0010 0x0040 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DTE_RTS 0x0010 0x0040 0x0710 0x3 0x4 +#define MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 +#define MX7D_PAD_LPSR_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DCE_RTS 0x0014 0x0044 0x0710 0x3 0x5 +#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DTE_CTS 0x0014 0x0044 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 +#define MX7D_PAD_LPSR_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DCE_RX 0x0018 0x0048 0x0714 0x3 0x4 +#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DTE_TX 0x0018 0x0048 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 +#define MX7D_PAD_LPSR_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 +#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DCE_TX 0x001C 0x004C 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DTE_RX 0x001C 0x004C 0x0714 0x3 0x5 +#define MX7D_PAD_LPSR_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 +#define MX7D_PAD_LPSR_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 #define MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x0014 0x026C 0x0000 0x0 0x0 #define MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x0014 0x026C 0x0000 0x1 0x0 #define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0014 0x026C 0x0000 0x2 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 2f33c463cbce..5be01a1bf840 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -111,7 +111,6 @@ }; &ecspi3 { - fsl,spi-num-chipselects = <1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; @@ -502,12 +501,6 @@ >; }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x110b0 - >; - }; - pinctrl_tsc2046_pendown: tsc2046_pendown { fsl,pins = < MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59 @@ -635,11 +628,19 @@ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b >; }; + }; +}; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 - >; - }; +&iomuxc_lpsr { + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index 0345267f3390..d5237fd0fa65 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -437,10 +437,12 @@ MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1b >; }; +}; +&iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < - MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 + MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 >; }; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index be33dfc86838..5d3a43b8de20 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -517,7 +517,6 @@ anatop-min-bit-val = <8>; anatop-min-voltage = <800000>; anatop-max-voltage = <1200000>; - anatop-enable-bit = <31>; }; }; diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index ac990f679725..ba828cb59587 100644 --- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi @@ -138,7 +138,8 @@ netcp: netcp@24000000 { /* NetCP address range */ ranges = <0 0x24000000 0x1000000>; - clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; + clock-names = "pa_clk", "ethss_clk", "cpts"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 497c417db5b6..0dd4cdd6d40c 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/reset/ti-syscon.h> + / { compatible = "ti,k2e", "ti,keystone"; model = "Texas Instruments Keystone 2 Edison SoC"; @@ -82,6 +84,29 @@ }; }; + msm_ram: msmram@0c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x200000>; + ranges = <0x0 0x0c000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + + sram-bm@1f0000 { + reg = <0x001f0000 0x8000>; + }; + }; + + psc: power-sleep-controller@02350000 { + pscrst: reset-controller { + compatible = "ti,k2e-pscrst", "ti,syscon-reset"; + #reset-cells = <1>; + + ti,reset-bits = < + 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ + >; + }; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 63c7cf0c6b6d..f59567fe7d91 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -40,12 +40,12 @@ }; gic: interrupt-controller@02561000 { - compatible = "arm,cortex-a15-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x02561000 0x0 0x1000>, <0x0 0x02562000 0x0 0x2000>, - <0x0 0x02564000 0x0 0x1000>, + <0x0 0x02564000 0x0 0x2000>, <0x0 0x02566000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -77,6 +77,18 @@ ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + msm_ram: msmram@0c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x100000>; + ranges = <0x0 0x0c000000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + + sram-bm@f7000 { + reg = <0x000f7000 0x8000>; + }; + }; + k2g_pinctrl: pinmux@02621000 { compatible = "pinctrl-single"; reg = <0x02621000 0x410>; @@ -90,7 +102,7 @@ }; uart0: serial@02530c00 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index f86d6ddb832b..a5ac845464bf 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -155,7 +155,8 @@ netcp: netcp@2000000 { /* NetCP address range */ ranges = <0 0x2000000 0x100000>; - clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; + clock-names = "pa_clk", "ethss_clk", "cpts"; dma-coherent; ti,navigator-dmas = <&dma_gbe 22>, diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi index 8f67fa8df936..69d449430511 100644 --- a/arch/arm/boot/dts/keystone-k2hk.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk.dtsi @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/reset/ti-syscon.h> + / { compatible = "ti,k2hk", "ti,keystone"; model = "Texas Instruments Keystone 2 Kepler/Hawking SoC"; @@ -46,6 +48,36 @@ soc { /include/ "keystone-k2hk-clocks.dtsi" + msm_ram: msmram@0c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x600000>; + ranges = <0x0 0x0c000000 0x600000>; + #address-cells = <1>; + #size-cells = <1>; + + sram-bm@5f0000 { + reg = <0x5f0000 0x8000>; + }; + }; + + psc: power-sleep-controller@02350000 { + pscrst: reset-controller { + compatible = "ti,k2hk-pscrst", "ti,syscon-reset"; + #reset-cells = <1>; + + ti,reset-bits = < + 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ + 0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */ + 0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */ + 0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */ + 0xa4c 8 0xa4c 8 0x84c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 4: dsp4 */ + 0xa50 8 0xa50 8 0x850 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 5: dsp5 */ + 0xa54 8 0xa54 8 0x854 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 6: dsp6 */ + 0xa58 8 0xa58 8 0x858 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 7: dsp7 */ + >; + }; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index 5acbd0dcc2ab..b6f26824e83a 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -137,7 +137,8 @@ netcp: netcp@26000000 { /* NetCP address range */ ranges = <0 0x26000000 0x1000000>; - clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>; + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>, <&clkosr>; + clock-names = "pa_clk", "ethss_clk", "cpts", "osr_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index 0c5e74e79ba2..b58e7ebc0919 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/reset/ti-syscon.h> + / { compatible = "ti,k2l", "ti,keystone"; model = "Texas Instruments Keystone 2 Lamarr SoC"; @@ -35,7 +37,7 @@ /include/ "keystone-k2l-clocks.dtsi" uart2: serial@02348400 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; @@ -45,7 +47,7 @@ }; uart3: serial@02348800 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; @@ -204,6 +206,32 @@ }; }; + msm_ram: msmram@0c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x200000>; + ranges = <0x0 0x0c000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + + sram-bm@1f8000 { + reg = <0x001f8000 0x8000>; + }; + }; + + psc: power-sleep-controller@02350000 { + pscrst: reset-controller { + compatible = "ti,k2l-pscrst", "ti,syscon-reset"; + #reset-cells = <1>; + + ti,reset-bits = < + 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ + 0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */ + 0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */ + 0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */ + >; + }; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 02708ba2d4f4..8dd74f48a6d3 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -30,12 +30,12 @@ }; gic: interrupt-controller { - compatible = "arm,cortex-a15-gic"; + compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x02561000 0x0 0x1000>, <0x0 0x02562000 0x0 0x2000>, - <0x0 0x02564000 0x0 0x1000>, + <0x0 0x02564000 0x0 0x2000>, <0x0 0x02566000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -83,6 +83,11 @@ reg = <0x02310000 0x200>; }; + psc: power-sleep-controller@02350000 { + compatible = "syscon", "simple-mfd"; + reg = <0x02350000 0x1000>; + }; + devctrl: device-state-control@02620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; @@ -98,7 +103,7 @@ /include/ "keystone-clocks.dtsi" uart0: serial@02530c00 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; @@ -108,7 +113,7 @@ }; uart1: serial@02531000 { - compatible = "ns16550a"; + compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index 41acbb6dd6ab..4d2b15d6244a 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -194,6 +194,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -241,6 +243,53 @@ &mdio { status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; /* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi index 6548e68a20d0..b9125e5ed076 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi index cf2e69f0d54f..29d929535453 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts index 6dc0df2969f0..9cc05203baee 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts index edcba5c44b05..ff37e76ab551 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts index 4b6450186af5..f602c059c718 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts index 954ec1d5b6dc..ef8fc1a077f8 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts index ecd5c12a805d..ce41d553b693 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi index 36c54c9dfa30..b459042a904a 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts index 345fcac48dc7..df7851820507 100644 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -70,6 +70,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -207,6 +209,53 @@ &mdio { status = "okay"; + + switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <16>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "ethernet1"; + }; + + port@1 { + reg = <1>; + label = "ethernet2"; + }; + + port@2 { + reg = <2>; + label = "ethernet3"; + }; + + port@3 { + reg = <3>; + label = "ethernet4"; + }; + + port@4 { + reg = <4>; + label = "internet"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; &uart0 { diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 172a38c0b8a9..327023a477b8 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -112,6 +112,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <1>; #size-cells = <0>; @@ -159,6 +161,53 @@ &mdio { status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; ð0 { diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts index 6f771a99cb02..9ec5a65561e9 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts @@ -19,11 +19,6 @@ model = "Marvell RD88f6281 Reference design, with A0 or higher SoC"; compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - dsa { - switch@0 { - reg = <10 0>; /* MDIO address 10, switch 0 in tree */ - }; - }; }; &mdio { @@ -34,6 +29,10 @@ }; }; +&switch { + reg = <10>; +}; + ð1 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts index 1a797381d3d4..6a4a65ec7944 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts @@ -33,3 +33,14 @@ ð1 { status = "disabled"; }; + +&switch { + reg = <0>; + + ports { + port@4 { + reg = <4>; + label = "wan"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index d5aacf137e40..91f5da5dae5f 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -54,6 +54,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -115,6 +117,48 @@ &mdio { status = "okay"; + + switch: switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + }; + }; }; ð0 { diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 282d854f4342..45ea57fafa18 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -110,11 +110,11 @@ ranges; gic: interrupt-controller@1400000 { - compatible = "arm,cortex-a7-gic"; + compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x1401000 0x0 0x1000>, - <0x0 0x1402000 0x0 0x1000>, + <0x0 0x1402000 0x0 0x2000>, <0x0 0x1404000 0x0 0x2000>, <0x0 0x1406000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts index 082ca8807c62..a4837985b7a7 100644 --- a/arch/arm/boot/dts/mt2701-evb.dts +++ b/arch/arm/boot/dts/mt2701-evb.dts @@ -24,6 +24,60 @@ }; }; +&auxadc { + status = "okay"; +}; + +&pio { + spi_pins_a: spi0@0 { + pins_spi { + pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>, + <MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK>, + <MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI>, + <MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO>; + bias-disable; + }; + }; + + spi_pins_b: spi1@0 { + pins_spi { + pinmux = <MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS>, + <MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI>, + <MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO>, + <MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK>; + bias-disable; + }; + }; + + spi_pins_c: spi2@0 { + pins_spi { + pinmux = <MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS>, + <MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI>, + <MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO>, + <MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK>; + bias-disable; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_a>; + status = "disabled"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_b>; + status = "disabled"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_c>; + status = "disabled"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 7eab6f4c4665..803721050116 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -13,6 +13,7 @@ */ #include <dt-bindings/clock/mt2701-clk.h> +#include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/mt2701-resets.h> @@ -87,6 +88,36 @@ clock-output-names = "rtc32k"; }; + thermal-zones { + cpu_thermal: cpu_thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&thermal 0>; + sustainable-power = <1000>; + + trips { + threshold: trip-point@0 { + temperature = <68000>; + hysteresis = <2000>; + type = "passive"; + }; + + target: trip-point@1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit@0 { + temperature = <115000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupt-parent = <&gic>; @@ -96,24 +127,6 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - pio: pinctrl@10005000 { - compatible = "mediatek,mt2701-pinctrl"; - reg = <0 0x1000b000 0 0x1000>; - mediatek,pctl-regmap = <&syscfg_pctl_a>; - pins-are-numbered; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - }; - - syscfg_pctl_a: syscfg@10005000 { - compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon"; - reg = <0 0x10005000 0 0x1000>; - }; - topckgen: syscon@10000000 { compatible = "mediatek,mt2701-topckgen", "syscon"; reg = <0 0x10000000 0 0x1000>; @@ -134,6 +147,22 @@ #reset-cells = <1>; }; + syscfg_pctl_a: syscfg@10005000 { + compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + scpsys: scpsys@10006000 { + compatible = "mediatek,mt2701-scpsys", "syscon"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + infracfg = <&infracfg>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_MFG_SEL>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "mm", "mfg", "ethif"; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt2701-wdt", "mediatek,mt6589-wdt"; @@ -149,6 +178,29 @@ clock-names = "system-clk", "rtc-clk"; }; + pio: pinctrl@1000b000 { + compatible = "mediatek,mt2701-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + + smi_common: smi@1000c000 { + compatible = "mediatek,mt2701-smi-common"; + reg = <0 0x1000c000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_SMI>, + <&mmsys CLK_MM_SMI_COMMON>, + <&infracfg CLK_INFRA_SMI>; + clock-names = "apb", "smi", "async"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + sysirq: interrupt-controller@10200100 { compatible = "mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq"; @@ -158,6 +210,16 @@ reg = <0 0x10200100 0 0x1c>; }; + iommu: mmsys_iommu@10205000 { + compatible = "mediatek,mt2701-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2>; + #iommu-cells = <1>; + }; + apmixedsys: syscon@10209000 { compatible = "mediatek,mt2701-apmixedsys", "syscon"; reg = <0 0x10209000 0 0x1000>; @@ -170,11 +232,20 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, - <0 0x10212000 0 0x1000>, + <0 0x10212000 0 0x2000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; + auxadc: adc@11001000 { + compatible = "mediatek,mt2701-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&pericfg CLK_PERI_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + uart0: serial@11002000 { compatible = "mediatek,mt2701-uart", "mediatek,mt6577-uart"; @@ -214,4 +285,144 @@ clock-names = "baud", "bus"; status = "disabled"; }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI0_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + thermal: thermal@1100b000 { + #thermal-sensor-cells = <0>; + compatible = "mediatek,mt2701-thermal"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT2701_PERI_THERM_SW_RST>; + reset-names = "therm"; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + }; + + nandc: nfi@1100d000 { + compatible = "mediatek,mt2701-nfc"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI>, + <&pericfg CLK_PERI_NFI_PAD>; + clock-names = "nfi_clk", "pad_clk"; + status = "disabled"; + ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + }; + + bch: ecc@1100e000 { + compatible = "mediatek,mt2701-ecc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_ECC>; + clock-names = "nfiecc_clk"; + status = "disabled"; + }; + + spi1: spi@11016000 { + compatible = "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11016000 0 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI1_SEL>, + <&pericfg CLK_PERI_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11017000 { + compatible = "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11017000 0 0x1000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI2_SEL>, + <&pericfg CLK_PERI_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt2701-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb0: larb@14010000 { + compatible = "mediatek,mt2701-smi-larb"; + reg = <0 0x14010000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + + imgsys: syscon@15000000 { + compatible = "mediatek,mt2701-imgsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb2: larb@15001000 { + compatible = "mediatek,mt2701-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&imgsys CLK_IMG_SMI_COMM>, + <&imgsys CLK_IMG_SMI_COMM>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt2701-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb1: larb@16010000 { + compatible = "mediatek,mt2701-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&vdecsys CLK_VDEC_CKGEN>, + <&vdecsys CLK_VDEC_LARB>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>; + }; + + hifsys: syscon@1a000000 { + compatible = "mediatek,mt2701-hifsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + + ethsys: syscon@1b000000 { + compatible = "mediatek,mt2701-ethsys", "syscon"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; + + bdpsys: syscon@1c000000 { + compatible = "mediatek,mt2701-bdpsys", "syscon"; + reg = <0 0x1c000000 0 0x1000>; + #clock-cells = <1>; + }; }; diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi index 06fdf6c2d5fd..a349dba5ff79 100644 --- a/arch/arm/boot/dts/mt6580.dtsi +++ b/arch/arm/boot/dts/mt6580.dtsi @@ -91,7 +91,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0x10211000 0x1000>, - <0x10212000 0x1000>, + <0x10212000 0x2000>, <0x10214000 0x2000>, <0x10216000 0x2000>; }; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index 88b3cb128698..0d6f60af7640 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -102,7 +102,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0x10211000 0x1000>, - <0x10212000 0x1000>, + <0x10212000 0x2000>, <0x10214000 0x2000>, <0x10216000 0x2000>; }; diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts index a9ee2d64c6f7..b60b41cad592 100644 --- a/arch/arm/boot/dts/mt7623-evb.dts +++ b/arch/arm/boot/dts/mt7623-evb.dts @@ -1,6 +1,6 @@ /* * Copyright (c) 2016 MediaTek Inc. - * Author: John Crispin <blogic@openwrt.org> + * Author: John Crispin <john@phrozen.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index fd2b614ae6f3..402579ab70d2 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -1,6 +1,6 @@ /* * Copyright (c) 2016 MediaTek Inc. - * Author: John Crispin <blogic@openwrt.org> + * Author: John Crispin <john@phrozen.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -104,7 +104,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, - <0 0x10212000 0 0x1000>, + <0 0x10212000 0 0x2000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi index 52086c8018e2..916c095d11b9 100644 --- a/arch/arm/boot/dts/mt8127.dtsi +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -129,7 +129,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, - <0 0x10212000 0 0x1000>, + <0 0x10212000 0 0x2000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index 1d7f92bdcb9c..a97b4ee4ae79 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -221,7 +221,7 @@ #interrupt-cells = <3>; interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, - <0 0x10212000 0 0x1000>, + <0 0x10212000 0 0x2000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi index e211a3c47a76..e172029a0c4d 100644 --- a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi +++ b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi index 68d75e79a360..c2d87ba6190a 100644 --- a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi +++ b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 85e297ed0ea1..673cee2234b2 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -27,6 +27,7 @@ aliases { display0 = &dvi0; display1 = &tv0; + ethernet = ðernet; }; leds { @@ -348,6 +349,21 @@ &usbhsehci { phys = <0 &hsusb2_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,9514"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; }; &vaux2 { diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 54c4c07bbe4a..e268efde6c6d 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -126,27 +126,6 @@ #address-cells = <1>; #size-cells = <1>; - - partition@0 { - label = "SPL"; - reg = <0 0x100000>; - }; - partition@80000 { - label = "U-Boot"; - reg = <0x100000 0x180000>; - }; - partition@1c0000 { - label = "Environment"; - reg = <0x280000 0x100000>; - }; - partition@280000 { - label = "Kernel"; - reg = <0x380000 0x300000>; - }; - partition@780000 { - label = "Filesystem"; - reg = <0x680000 0x1f980000>; - }; }; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4d448f145ed1..b64cfda8dbb7 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -47,7 +47,7 @@ compatible = "gpio-leds"; heartbeat { label = "debug::sleep"; - gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */ + gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */ linux,default-trigger = "default-on"; pinctrl-names = "default"; pinctrl-0 = <&debug_leds>; @@ -625,6 +625,7 @@ reg = <0x55>; }; + /* Stereo headphone amplifier */ tpa6130a2: tpa6130a2@60 { compatible = "ti,tpa6130a2"; reg = <0x60>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 1673689e6705..edbc4090297d 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -16,6 +16,7 @@ aliases { display0 = &dvi0; display1 = &hdmi0; + ethernet = ðernet; }; leds: leds { @@ -520,6 +521,21 @@ &usbhsehci { phys = <&hsusb1_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; }; &dss { diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index 8fc19218057e..fef2a446b61c 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -19,6 +19,10 @@ reg = <0x0 0x80000000 0 0x7f000000>; /* 2032 MB */ }; + aliases { + ethernet = ðernet; + }; + gpio_keys { compatible = "gpio-keys"; pinctrl-0 = <&power_button_pin>; @@ -116,3 +120,20 @@ OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ >; }; + +&usbhsehci { + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@3 { + compatible = "usb424,7500"; + reg = <3>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index a8c72611fbe3..0d42c46f13e7 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -18,6 +18,10 @@ reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */ }; + aliases { + ethernet = ðernet; + }; + leds { compatible = "gpio-leds"; led1 { @@ -164,6 +168,23 @@ >; }; +&usbhsehci { + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ethernet: usbether@3 { + compatible = "usb424,9730"; + reg = <3>; + }; +}; + &wlcore { compatible = "ti,wl1837"; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 0844737b72b2..222155ca8ad7 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -92,7 +92,7 @@ interrupt-controller; #interrupt-cells = <3>; reg = <0 0x48211000 0 0x1000>, - <0 0x48212000 0 0x1000>, + <0 0x48212000 0 0x2000>, <0 0x48214000 0 0x2000>, <0 0x48216000 0 0x2000>; interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/orion5x-kuroboxpro.dts b/arch/arm/boot/dts/orion5x-kuroboxpro.dts index 1a672b098d0b..e28b568e741a 100644 --- a/arch/arm/boot/dts/orion5x-kuroboxpro.dts +++ b/arch/arm/boot/dts/orion5x-kuroboxpro.dts @@ -17,17 +17,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -36,11 +36,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts index ea6c881634b9..ee751995c8d0 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts index 51dc734cd5b9..9f6fedd39170 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts @@ -18,17 +18,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -37,11 +37,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 0eead400f427..7f77ce8cc1fc 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi index ed456ab35fd8..e9991c83d7b7 100644 --- a/arch/arm/boot/dts/orion5x-linkstation.dtsi +++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts index 6b47a52ceb9c..ea966ec03dd0 100644 --- a/arch/arm/boot/dts/orion5x-lswsgl.dts +++ b/arch/arm/boot/dts/orion5x-lswsgl.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi index ce13705c38d4..46aa6db8353a 100644 --- a/arch/arm/boot/dts/ox810se.dtsi +++ b/arch/arm/boot/dts/ox810se.dtsi @@ -7,6 +7,8 @@ */ /include/ "skeleton.dtsi" +#include <dt-bindings/clock/oxsemi,ox810se.h> +#include <dt-bindings/reset/oxsemi,ox810se.h> / { compatible = "oxsemi,ox810se"; @@ -242,7 +244,7 @@ current-speed = <115200>; no-loopback-test; status = "disabled"; - resets = <&reset 17>; + resets = <&reset RESET_UART1>; }; uart1: serial@300000 { @@ -256,7 +258,7 @@ current-speed = <115200>; no-loopback-test; status = "disabled"; - resets = <&reset 18>; + resets = <&reset RESET_UART2>; }; uart2: serial@900000 { @@ -270,7 +272,7 @@ current-speed = <115200>; no-loopback-test; status = "disabled"; - resets = <&reset 22>; + resets = <&reset RESET_UART3>; }; uart3: serial@a00000 { @@ -284,7 +286,7 @@ current-speed = <115200>; no-loopback-test; status = "disabled"; - resets = <&reset 23>; + resets = <&reset RESET_UART4>; }; }; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index e40f282a023a..459207536a46 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -8,6 +8,8 @@ /include/ "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/oxsemi,ox820.h> +#include <dt-bindings/reset/oxsemi,ox820.h> / { compatible = "oxsemi,ox820"; @@ -83,8 +85,8 @@ nandc: nand-controller@41000000 { compatible = "oxsemi,ox820-nand"; reg = <0x41000000 0x100000>; - clocks = <&stdclk 11>; - resets = <&reset 15>; + clocks = <&stdclk CLK_820_NAND>; + resets = <&reset RESET_NAND>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -99,9 +101,9 @@ mac-address = [000000000000]; /* Filled in by U-Boot */ phy-mode = "rgmii"; - clocks = <&stdclk 9>, <&gmacclk>; + clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; clock-names = "gmac", "stmmaceth"; - resets = <&reset 6>; + resets = <&reset RESET_MAC>; /* Regmap for sys registers */ oxsemi,sys-ctrl = <&sys>; @@ -208,7 +210,7 @@ no-loopback-test; status = "disabled"; clocks = <&sysclk>; - resets = <&reset 17>; + resets = <&reset RESET_UART1>; }; uart1: serial@300000 { @@ -222,7 +224,7 @@ no-loopback-test; status = "disabled"; clocks = <&sysclk>; - resets = <&reset 18>; + resets = <&reset RESET_UART2>; }; rps@400000 { diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 4b8872cc8bf9..39d9e6ddefed 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -220,6 +220,14 @@ function = "ebi2"; }; }; + + /* Interrupt line for the KXSD9 accelerometer */ + dragon_kxsd9_gpios: kxsd9 { + irq { + pins = "gpio57"; /* IRQ line */ + bias-pull-up; + }; + }; }; qcom,ssbi@500000 { @@ -272,6 +280,15 @@ power-source = <PM8058_GPIO_S3>; }; }; + dragon_mpu3050_gpios: mpu3050-gpios { + pinconf { + pins = "gpio17"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; dragon_sdcc3_gpios: sdcc3-gpios { pinconf { pins = "gpio22"; @@ -369,8 +386,8 @@ ak8975@0c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - /* GPIO33 has interrupt 224 on the PM8058 */ - interrupt-parent = <&pm8058_gpio>; + /* FIXME: GPIO33 has interrupt 224 on the PM8058 */ + interrupt-parent = <&pm8058>; interrupts = <224 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_ak8975_gpios>; @@ -380,8 +397,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; - /* GPIO16 has interrupt 207 on the PM8058 */ - interrupt-parent = <&pm8058_gpio>; + /* FIXME: GPIO16 has interrupt 207 on the PM8058 */ + interrupt-parent = <&pm8058>; interrupts = <207 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -389,6 +406,41 @@ vddd-supply = <&pm8058_lvs0>; // 1.8V vdda-supply = <&pm8058_l14>; // 2.85V }; + mpu3050@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + /* + * GPIO17 has interrupt 208 on the + * PM8058, it is pulled high by a 10k + * resistor to VLOGIC so needs to be + * active low/falling edge. + */ + interrupts-extended = <&pm8058 208 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_mpu3050_gpios>; + vlogic-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + + /* + * The MPU-3050 acts as a hub for the + * accelerometer. + */ + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + kxsd9@18 { + compatible = "kionix,kxsd9"; + reg = <0x18>; + interrupt-parent = <&tlmm>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_kxsd9_gpios>; + iovdd-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + }; + }; + }; }; }; @@ -412,7 +464,7 @@ * The second interrupt is the PME interrupt * for network wakeup, connected to the TLMM. */ - interrupts-extended = <&pmicintc 198 IRQ_TYPE_EDGE_FALLING>, + interrupts-extended = <&pm8058 198 IRQ_TYPE_EDGE_FALLING>, <&tlmm 29 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; vdd33a-supply = <&dragon_veth>; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts index 39ae2bc8cb08..8f5de029bca9 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts @@ -39,6 +39,17 @@ }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + soc { rpm@108000 { regulators { @@ -74,6 +85,14 @@ bias-pull-down; }; + s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + regulator-always-on; + }; + s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; @@ -121,6 +140,16 @@ bias-pull-down; }; + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; @@ -347,5 +376,45 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>; }; }; + + riva-pil@3204000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + }; + + hdmi-tx@4a00000 { + status = "okay"; + core-vdda-supply = <&pm8921_hdmi_switch>; + hdmi-mux-supply = <&vcc3v3>; + + hpd-gpio = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-phy@4a00400 { + status = "okay"; + core-vdda-supply = <&pm8921_hdmi_switch>; + }; + + mdp@5100000 { + status = "okay"; + + ports { + port@3 { + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 3d37cab3b9a9..881ce707311a 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -75,25 +75,6 @@ bias-disable; }; }; - - hdmi_pinctrl: hdmi-pinctrl { - mux { - pins = "gpio70", "gpio71", "gpio72"; - function = "hdmi"; - }; - - pinconf_ddc { - pins = "gpio70", "gpio71"; - bias-pull-up; - drive-strength = <2>; - }; - - pinconf_hpd { - pins = "gpio72"; - bias-pull-down; - drive-strength = <16>; - }; - }; }; rpm@108000 { @@ -368,9 +349,6 @@ hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_pinctrl>; - ports { port@0 { endpoint { diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi index 6b801e7e57a2..173ab7c299ce 100644 --- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi @@ -284,4 +284,41 @@ bias-disable = <0>; }; }; + + riva_fm_pin_a: riva-fm-active { + pins = "gpio14", "gpio15"; + function = "riva_fm"; + }; + + riva_bt_pin_a: riva-bt-active { + pins = "gpio16", "gpio17"; + function = "riva_bt"; + }; + + riva_wlan_pin_a: riva-wlan-active { + pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "riva_wlan"; + + drive-strength = <6>; + bias-pull-down; + }; + + hdmi_pinctrl: hdmi-pinctrl { + mux { + pins = "gpio70", "gpio71", "gpio72"; + function = "hdmi"; + }; + + pinconf_ddc { + pins = "gpio70", "gpio71"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf_hpd { + pins = "gpio72"; + bias-pull-down; + drive-strength = <16>; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts index ebd675ca94b4..a34ba3555454 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -390,5 +390,12 @@ pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; }; }; + + riva-pil@3204000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 407a4610f4a7..14a6f5ed02de 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -22,13 +22,18 @@ reg = <0x80000000 0x200000>; no-map; }; + + wcnss_mem: wcnss@8f000000 { + reg = <0x8f000000 0x700000>; + no-map; + }; }; cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + CPU0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -39,7 +44,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@1 { + CPU1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -50,7 +55,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@2 { + CPU2: cpu@2 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -61,7 +66,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@3 { + CPU3: cpu@3 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -180,7 +185,7 @@ }; clocks { - cxo_board { + cxo_board: cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; @@ -631,6 +636,33 @@ clock-names = "core"; }; + ssbi@c00000 { + compatible = "qcom,ssbi"; + reg = <0x00c00000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + + pm8821: pmic@1 { + compatible = "qcom,pm8821"; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <76 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pm8821_mpps: mpps@50 { + compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; + reg = <0x50>; + interrupts = <24 IRQ_TYPE_NONE>, + <25 IRQ_TYPE_NONE>, + <26 IRQ_TYPE_NONE>, + <27 IRQ_TYPE_NONE>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + qcom,ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; @@ -1327,6 +1359,8 @@ hdmi: hdmi-tx@4a00000 { compatible = "qcom,hdmi-tx-8960"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pinctrl>; reg = <0x04a00000 0x2f0>; reg-names = "core_physical"; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; @@ -1420,6 +1454,249 @@ }; }; }; + + riva: riva-pil@3204000 { + compatible = "qcom,riva-pil"; + + reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>; + reg-names = "ccu", "dxe", "pmu"; + + interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal"; + + memory-region = <&wcnss_mem>; + + vddcx-supply = <&pm8921_s3>; + vddmx-supply = <&pm8921_l24>; + vddpx-supply = <&pm8921_s4>; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3660"; + + clocks = <&cxo_board>; + clock-names = "xo"; + + vddxo-supply = <&pm8921_l4>; + vddrfa-supply = <&pm8921_s2>; + vddpa-supply = <&pm8921_l10>; + vdddig-supply = <&pm8921_lvs2>; + }; + + smd-edge { + interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&l2cc 8 25>; + qcom,smd-edge = <6>; + + label = "riva"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&riva>; + + bt { + compatible = "qcom,wcnss-bt"; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; + }; + + etb@1a01000 { + compatible = "coresight-etb10", "arm,primecell"; + reg = <0x1a01000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + port { + etb_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out0>; + }; + }; + }; + + tpiu@1a03000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x1a03000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + port { + tpiu_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out1>; + }; + }; + }; + + replicator { + compatible = "arm,coresight-replicator"; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + port@2 { + reg = <0>; + replicator_in: endpoint { + slave-mode; + remote-endpoint = <&funnel_out>; + }; + }; + }; + }; + + funnel@1a04000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x1a04000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 2 - connected to STM component + * 3 - not-connected + * 6 - not-connected + * 7 - not-connected + */ + port@0 { + reg = <0>; + funnel_in0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + funnel_in1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out>; + }; + }; + port@4 { + reg = <4>; + funnel_in4: endpoint { + slave-mode; + remote-endpoint = <&etm2_out>; + }; + }; + port@5 { + reg = <5>; + funnel_in5: endpoint { + slave-mode; + remote-endpoint = <&etm3_out>; + }; + }; + port@8 { + reg = <0>; + funnel_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etm@1a1c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1c000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_in0>; + }; + }; + }; + + etm@1a1d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1d000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_in1>; + }; + }; + }; + + etm@1a1e000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1e000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_in4>; + }; + }; + }; + + etm@1a1f000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1f000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_in5>; + }; + }; + }; }; }; #include "qcom-apq8064-pins.dtsi" diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 2e375576ffd0..76f4e8921d58 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -65,13 +65,13 @@ cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <19200000>; + clock-frequency = <25000000>; }; pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <27000000>; + clock-frequency = <25000000>; }; sleep_clk: sleep_clk { diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 23de764558ab..1adc04978a47 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -48,7 +48,7 @@ }; }; -&pmicintc { +&pm8058 { keypad@148 { linux,keymap = < MATRIX_KEY(0, 0, KEY_FN_F1) diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 4d828f810746..91c9a62ae725 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -163,7 +163,7 @@ reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - pmicintc: pmic@0 { + pm8058: pmic@0 { compatible = "qcom,pm8058"; interrupt-parent = <&tlmm>; interrupts = <88 8>; @@ -176,7 +176,7 @@ compatible = "qcom,pm8058-gpio", "qcom,ssbi-gpio"; reg = <0x150>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <192 IRQ_TYPE_NONE>, <193 IRQ_TYPE_NONE>, <194 IRQ_TYPE_NONE>, @@ -232,7 +232,7 @@ reg = <0x50>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <128 IRQ_TYPE_NONE>, <129 IRQ_TYPE_NONE>, @@ -251,7 +251,7 @@ pwrkey@1c { compatible = "qcom,pm8058-pwrkey"; reg = <0x1c>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <50 1>, <51 1>; debounce = <15625>; pull-up; @@ -260,7 +260,7 @@ keypad@148 { compatible = "qcom,pm8058-keypad"; reg = <0x148>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <74 1>, <75 1>; debounce = <15>; scan-delay = <32>; @@ -270,7 +270,7 @@ rtc@1e8 { compatible = "qcom,pm8058-rtc"; reg = <0x1e8>; - interrupt-parent = <&pmicintc>; + interrupt-parent = <&pm8058>; interrupts = <39 1>; allow-set-time; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index e7c1577d56f4..96c853bab8ba 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -413,6 +413,14 @@ dma-controller@f9944000 { qcom,controlled-remotely; }; + + usb-phy@f9a55000 { + status = "ok"; + }; + + usb@f9a55000 { + status = "ok"; + }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 49d579f28865..d3e1a61b8671 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/qcom,gcc-msm8974.h> #include "skeleton.dtsi" / { @@ -30,7 +31,7 @@ no-map; }; - adsp@0dc00000 { + adsp_region: adsp@0dc00000 { reg = <0x0dc00000 0x1900000>; no-map; }; @@ -59,11 +60,6 @@ reg = <0x0fd80000 0x180000>; no-map; }; - - unused@0ff00000 { - reg = <0x0ff00000 0x10100000>; - no-map; - }; }; cpus { @@ -242,6 +238,24 @@ clock-frequency = <19200000>; }; + adsp-pil { + compatible = "qcom,msm8974-adsp-pil"; + + interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + cx-supply = <&pm8841_s2>; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + }; + smem { compatible = "qcom,smem"; @@ -251,6 +265,31 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupt-parent = <&intc>; + interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + smp2p-modem { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -655,11 +694,56 @@ #dma-cells = <1>; qcom,ee = <0>; }; + + usb1_phy: usb-phy@f9a55000 { + compatible = "qcom,usb-otg-snps"; + + reg = <0xf9a55000 0x400>; + interrupts-extended = <&intc 0 134 0>, <&intc 0 140 0>, + <&spmi_bus 0 0x9 0 0>; + interrupt-names = "core_irq", "async_irq", "pmic_id_irq"; + + vddcx-supply = <&pm8841_s2>; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + + dr_mode = "otg"; + qcom,phy-init-sequence = <0x63 0x81 0xfffffff>; + qcom,otg-control = <1>; + qcom,phy-num = <0>; + + resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>; + reset-names = "phy", "link"; + + clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>, + <&gcc GCC_USB_HS_AHB_CLK>; + clock-names = "phy", "core", "iface"; + + status = "disabled"; + }; + + usb@f9a55000 { + compatible = "qcom,ci-hdrc"; + reg = <0xf9a55000 0x400>; + dr_mode = "otg"; + interrupts = <0 134 0>, <0 140 0>; + interrupt-names = "core_irq", "async_irq"; + usb-phy = <&usb1_phy>; + + status = "disabled"; + }; }; smd { compatible = "qcom,smd"; + adsp { + interrupts = <0 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + }; + modem { interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index dd4418195ca6..02b59c5b3c53 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -61,6 +61,14 @@ status = "okay"; }; +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + &scif2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 3dd427d68c83..b8aa256bd515 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -108,6 +108,15 @@ clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7"; }; + mstp5_clks: mstp5_clks@fcfe0428 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0428 4>; + clocks = <&p0_clk>, <&p0_clk>; + clock-indices = <R7S72100_CLK_OSTM0 R7S72100_CLK_OSTM1>; + clock-output-names = "ostm0", "ostm1"; + }; + mstp7_clks: mstp7_clks@fcfe0430 { #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -466,6 +475,7 @@ GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R7S72100_CLK_MMCIF>; + power-domains = <&cpg_clocks>; reg-io-width = <4>; bus-width = <8>; status = "disabled"; @@ -496,4 +506,22 @@ cap-sdio-irq; status = "disabled"; }; + + ostm0: timer@fcfec000 { + compatible = "renesas,r7s72100-ostm", "renesas,ostm"; + reg = <0xfcfec000 0x30>; + interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>; + clocks = <&mstp5_clks R7S72100_CLK_OSTM0>; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + ostm1: timer@fcfec400 { + compatible = "renesas,r7s72100-ostm", "renesas,ostm"; + reg = <0xfcfec400 0x30>; + interrupts = <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>; + clocks = <&mstp5_clks R7S72100_CLK_OSTM1>; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 53183ffe04c1..00eb9a7114dc 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -440,7 +440,7 @@ }; mmcif0: mmc@ee200000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a73a4", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>; @@ -450,7 +450,7 @@ }; mmcif1: mmc@ee220000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a73a4", "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>; @@ -465,7 +465,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 216cb1f37f87..d8393b97768b 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -55,11 +55,14 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; }; irqc: interrupt-controller@e61c0000 { @@ -102,10 +105,9 @@ #power-domain-cells = <0>; }; - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7743-sysc"; - reg = <0 0xe6180000 0 0x200>; - #power-domain-cells = <1>; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; }; rst: reset-controller@e6160000 { @@ -113,6 +115,12 @@ reg = <0 0xe6160000 0 0x100>; }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7743-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7743", "renesas,rcar-dmac"; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 0b2e2f37150f..1f65ff68a469 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -55,11 +55,14 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; }; irqc: interrupt-controller@e61c0000 { @@ -102,10 +105,9 @@ #power-domain-cells = <0>; }; - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7745-sysc"; - reg = <0 0xe6180000 0 0x200>; - #power-domain-cells = <1>; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; }; rst: reset-controller@e6160000 { @@ -113,6 +115,12 @@ reg = <0 0xe6160000 0 0x100>; }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7745-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7745", "renesas,rcar-dmac"; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index d0db998effc8..1e93c94a9eac 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -150,7 +150,7 @@ i2c0: i2c@ffc70000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7778"; + compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c"; reg = <0xffc70000 0x1000>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C0>; @@ -161,7 +161,7 @@ i2c1: i2c@ffc71000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7778"; + compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c"; reg = <0xffc71000 0x1000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C1>; @@ -172,7 +172,7 @@ i2c2: i2c@ffc72000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7778"; + compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c"; reg = <0xffc72000 0x1000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C2>; @@ -183,7 +183,7 @@ i2c3: i2c@ffc73000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7778"; + compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c"; reg = <0xffc73000 0x1000>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C3>; @@ -369,7 +369,7 @@ }; mmcif: mmc@ffe4e000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a7778", "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_MMC>; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 676151b70185..89c5b24a3d03 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -216,6 +216,10 @@ }; }; +&sata { + status = "okay"; +}; + &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 55a7c1e37c57..ae2d9a9c65af 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -173,7 +173,7 @@ i2c0: i2c@ffc70000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc70000 0x1000>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C0>; @@ -184,7 +184,7 @@ i2c1: i2c@ffc71000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc71000 0x1000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C1>; @@ -195,7 +195,7 @@ i2c2: i2c@ffc72000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc72000 0x1000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C2>; @@ -206,7 +206,7 @@ i2c3: i2c@ffc73000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7779"; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; reg = <0xffc73000 0x1000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C3>; @@ -347,6 +347,7 @@ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; }; sdhi0: sd@ffe4c000 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 0c8900d4b824..6d10450de6d7 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -183,7 +183,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; @@ -480,7 +480,7 @@ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7790"; + compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C0>; @@ -492,7 +492,7 @@ i2c1: i2c@e6518000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7790"; + compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C1>; @@ -504,7 +504,7 @@ i2c2: i2c@e6530000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7790"; + compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C2>; @@ -516,7 +516,7 @@ i2c3: i2c@e6540000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7790"; + compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C3>; @@ -528,7 +528,8 @@ iic0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC0>; @@ -542,7 +543,8 @@ iic1: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC1>; @@ -556,7 +558,8 @@ iic2: i2c@e6520000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x425>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC2>; @@ -570,7 +573,8 @@ iic3: i2c@e60b0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; @@ -883,7 +887,8 @@ }; usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7790"; + compatible = "renesas,usb-phy-r8a7790", + "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; @@ -1503,7 +1508,8 @@ }; msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7790"; + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; @@ -1517,7 +1523,8 @@ }; msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7790"; + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; @@ -1531,7 +1538,8 @@ }; msiof2: spi@e6e00000 { - compatible = "renesas,msiof-r8a7790"; + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; @@ -1545,7 +1553,8 @@ }; msiof3: spi@e6c90000 { - compatible = "renesas,msiof-r8a7790"; + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6c90000 0 0x0064>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 87214668d70f..9f9e48511836 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -114,7 +114,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -444,7 +444,7 @@ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C0>; @@ -456,7 +456,7 @@ i2c1: i2c@e6518000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C1>; @@ -468,7 +468,7 @@ i2c2: i2c@e6530000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C2>; @@ -480,7 +480,7 @@ i2c3: i2c@e6540000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C3>; @@ -492,7 +492,7 @@ i2c4: i2c@e6520000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C4>; @@ -505,7 +505,7 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C5>; @@ -518,7 +518,8 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; @@ -532,7 +533,8 @@ i2c7: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC0>; @@ -546,7 +548,8 @@ i2c8: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC1>; @@ -934,7 +937,8 @@ }; usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7791"; + compatible = "renesas,usb-phy-r8a7791", + "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; @@ -1517,7 +1521,8 @@ }; msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; @@ -1531,7 +1536,8 @@ }; msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; @@ -1545,7 +1551,8 @@ }; msiof2: spi@e6e00000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 6ced3c1ec377..8ecfda7a004e 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -88,7 +88,7 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | @@ -498,7 +498,8 @@ /* I2C doesn't need pinmux */ i2c0: i2c@e6508000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C0>; @@ -510,7 +511,8 @@ }; i2c1: i2c@e6518000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C1>; @@ -522,7 +524,8 @@ }; i2c2: i2c@e6530000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C2>; @@ -534,7 +537,8 @@ }; i2c3: i2c@e6540000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C3>; @@ -546,7 +550,8 @@ }; i2c4: i2c@e6520000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C4>; @@ -558,7 +563,8 @@ }; i2c5: i2c@e6528000 { - compatible = "renesas,i2c-r8a7792"; + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7792_CLK_I2C5>; @@ -585,7 +591,8 @@ }; msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7792"; + compatible = "renesas,msiof-r8a7792", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7792_CLK_MSIOF0>; @@ -599,7 +606,8 @@ }; msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7792"; + compatible = "renesas,msiof-r8a7792", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7792_CLK_MSIOF1>; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index dc311eba4444..92fff07c5e2b 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -538,6 +538,27 @@ }; }; +&i2c6 { + status = "okay"; + clock-frequency = <100000>; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; +}; + &rcar_sound { pinctrl-0 = <&sound_pins &sound_clk_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 2fb527ca0b15..48ce21c5e8db 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -105,7 +105,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -411,7 +411,7 @@ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C0>; @@ -423,7 +423,7 @@ i2c1: i2c@e6518000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C1>; @@ -435,7 +435,7 @@ i2c2: i2c@e6530000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C2>; @@ -447,7 +447,7 @@ i2c3: i2c@e6540000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C3>; @@ -459,7 +459,7 @@ i2c4: i2c@e6520000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C4>; @@ -472,7 +472,7 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7793"; + compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C5>; @@ -485,7 +485,8 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>; @@ -499,7 +500,8 @@ i2c7: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_IIC0>; @@ -513,7 +515,8 @@ i2c8: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_IIC1>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index fb576dba748c..319c1069b7ee 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -71,7 +71,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, + <0 0xf1002000 0 0x2000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -611,7 +611,7 @@ /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C0>; @@ -623,7 +623,7 @@ }; i2c1: i2c@e6518000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C1>; @@ -635,7 +635,7 @@ }; i2c2: i2c@e6530000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C2>; @@ -647,7 +647,7 @@ }; i2c3: i2c@e6540000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C3>; @@ -659,7 +659,7 @@ }; i2c4: i2c@e6520000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C4>; @@ -671,7 +671,7 @@ }; i2c5: i2c@e6528000 { - compatible = "renesas,i2c-r8a7794"; + compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C5>; @@ -683,7 +683,8 @@ }; i2c6: i2c@e6500000 { - compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7794", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_IIC0>; @@ -697,7 +698,8 @@ }; i2c7: i2c@e6510000 { - compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7794", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_IIC1>; @@ -878,7 +880,8 @@ }; usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7794"; + compatible = "renesas,usb-phy-r8a7794", + "renesas,rcar-gen2-usb-phy"; reg = <0 0xe6590100 0 0x100>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi index d7700235e0f5..d6194bff7afe 100644 --- a/arch/arm/boot/dts/rk1108.dtsi +++ b/arch/arm/boot/dts/rk1108.dtsi @@ -215,7 +215,7 @@ #address-cells = <0>; reg = <0x32011000 0x1000>, - <0x32012000 0x1000>, + <0x32012000 0x2000>, <0x32014000 0x2000>, <0x32016000 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 2f5f15524fba..c0953410121b 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -56,7 +56,7 @@ pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>; phy = <&phy0>; - phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-duration = <10>; /* millisecond */ status = "okay"; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 3de958ec29c0..5726135b7f8a 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -55,7 +55,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; label = "kylin:red:led"; pinctrl-names = "default"; pinctrl-0 = <&led_ctl>; @@ -74,9 +74,9 @@ * - SDIO_RESET_L_WL_RST * - SDIO_RESET_L_BT_EN */ - reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ - <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */ - <&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */ + reset-gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ + <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>, /* WL_RST */ + <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; /* BT_EN */ }; sound { @@ -121,7 +121,7 @@ pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>; phy = <&phy0>; - phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-duration = <10>; /* millisecond */ status = "okay"; @@ -148,7 +148,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio2>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 4ed49a243e5c..ff9b90bfaefd 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -189,7 +189,7 @@ #address-cells = <0>; reg = <0x10139000 0x1000>, - <0x1013a000 0x1000>, + <0x1013a000 0x2000>, <0x1013c000 0x2000>, <0x1013e000 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index c0d8b5446ba7..e1f5198723b2 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -71,7 +71,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -81,7 +81,7 @@ autorepeat; power { - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ + gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -89,7 +89,7 @@ debounce-interval = <100>; }; volume-down { - gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ linux,code = <KEY_VOLUMEDOWN>; label = "GPIO Key Vol-"; linux,input-type = <1>; @@ -111,7 +111,7 @@ reg = <0x2d>; interrupt-parent = <&gpio6>; - interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; vcc5-supply = <&vcc_io>; vcc6-supply = <&vcc_io>; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index 0a54c4beff8d..c6d92c25df42 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -69,7 +69,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -91,7 +91,7 @@ reg = <0x2d>; interrupt-parent = <&gpio6>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; vcc1-supply = <&vsys>; vcc2-supply = <&vsys>; @@ -186,7 +186,7 @@ phy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&gpio1>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 658eb7ddeaf5..7ca1cf5241e0 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -61,7 +61,7 @@ blue { label = "mk808:blue:power"; - gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "default-on"; }; @@ -77,7 +77,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&host_drv>; pinctrl-names = "default"; regulator-always-on; @@ -91,7 +91,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&otg_drv>; pinctrl-names = "default"; regulator-always-on; @@ -104,7 +104,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; pinctrl-0 = <&sdmmc_pwr>; pinctrl-names = "default"; regulator-name = "vcc_sd"; @@ -117,7 +117,7 @@ vcc_wifi: sdio-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>; + gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&wifi_pwr>; pinctrl-names = "default"; regulator-name = "vcc_wifi"; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 82465b644443..8907deaab18e 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -55,7 +55,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -65,7 +65,7 @@ power { wakeup-source; - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; pinctrl-names = "default"; @@ -115,7 +115,7 @@ vcc_sata: sata-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&sata_pwr>; regulator-name = "usb_5v"; @@ -127,7 +127,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -140,7 +140,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_drv>; regulator-name = "host-pwr"; @@ -153,7 +153,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_drv>; regulator-name = "vcc_otg"; @@ -201,7 +201,7 @@ compatible = "asahi-kasei,ak8975"; reg = <0x0d>; interrupt-parent = <&gpio4>; - interrupts = <17 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&comp_int>; }; @@ -210,7 +210,7 @@ compatible = "fsl,mma8452"; reg = <0x1d>; interrupt-parent = <&gpio4>; - interrupts = <16 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&gsensor_int>; }; @@ -223,7 +223,7 @@ tps: tps@2d { reg = <0x2d>; interrupt-parent = <&gpio6>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>, <&pwr_hold>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index e498c362b9e7..f50481fd8e5c 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -687,6 +687,7 @@ }; &uart0 { + compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; dmas = <&dmac1_s 0>, <&dmac1_s 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; @@ -694,6 +695,7 @@ }; &uart1 { + compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; dmas = <&dmac1_s 2>, <&dmac1_s 3>; dma-names = "tx", "rx"; pinctrl-names = "default"; @@ -701,6 +703,7 @@ }; &uart2 { + compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; dmas = <&dmac2 6>, <&dmac2 7>; dma-names = "tx", "rx"; pinctrl-names = "default"; @@ -708,6 +711,7 @@ }; &uart3 { + compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart"; dmas = <&dmac2 8>, <&dmac2 9>; dma-names = "tx", "rx"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index df727bafd6dc..5b2a0b6885cd 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -62,7 +62,7 @@ autorepeat; power { - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -102,7 +102,7 @@ compatible = "bosch,bma250"; reg = <0x18>; interrupt-parent = <&gpio0>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -114,7 +114,7 @@ compatible = "rockchip,rk818"; reg = <0x1c>; interrupt-parent = <&gpio0>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>; rockchip,system-power-controller; wakeup-source; #clock-cells = <1>; @@ -247,8 +247,8 @@ compatible = "silead,gsl1680"; reg = <0x40>; interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_EDGE_FALLING>; - power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; touchscreen-size-x = <800>; touchscreen-size-y = <1280>; silead,max-fingers = <5>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 5e8a235ed02d..ca0a1c4bc15c 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -58,7 +58,7 @@ autorepeat; power { - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -72,19 +72,19 @@ green { label = "rock:green:user1"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>; default-state = "off"; }; blue { label = "rock:blue:user2"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; default-state = "off"; }; sleep { label = "rock:red:power"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; @@ -106,7 +106,7 @@ ir_recv: gpio-ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio0 10 1>; + gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_recv_pin>; }; @@ -114,7 +114,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "otg-vbus"; @@ -129,7 +129,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio3 1 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -137,7 +137,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "host-pwr"; @@ -168,7 +168,7 @@ phy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&gpio3>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -184,7 +184,7 @@ compatible = "haoyu,hym8563"; reg = <0x51>; interrupt-parent = <&gpio0>; - interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 869e189331ec..cf91254d0a43 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -599,21 +599,25 @@ }; &uart0 { + compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart"; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; }; &uart1 { + compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart"; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; }; &uart2 { + compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart"; pinctrl-names = "default"; pinctrl-0 = <&uart2_xfer>; }; &uart3 { + compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart"; pinctrl-names = "default"; pinctrl-0 = <&uart3_xfer>; }; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index dcdd0cee619e..275092a950ef 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -77,7 +77,7 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; tx_delay = <0x30>; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 9d3aee5abc15..9dff8221112c 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -443,7 +443,7 @@ #address-cells = <0>; reg = <0x32011000 0x1000>, - <0x32012000 0x1000>, + <0x32012000 0x2000>, <0x32014000 0x2000>, <0x32016000 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 041dd5d2d18c..b9418d170502 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -47,7 +47,7 @@ vcc_lcd: vcc-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_en>; regulator-name = "vcc_lcd"; @@ -57,7 +57,7 @@ vcc_wl: vcc-wl { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&wifi_pwr>; regulator-name = "vcc_wl"; @@ -96,7 +96,7 @@ reg = <0x51>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 44ebc6e59b3a..56c266df01c1 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -52,7 +52,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index bf7ccfad3260..0dec94c3583b 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -84,7 +84,7 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <128>; - enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; @@ -100,7 +100,7 @@ panel: panel { compatible ="lg,lp079qx1-sp0v", "simple-panel"; backlight = <&backlight>; - enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&lcd_cs>; ports { @@ -120,7 +120,7 @@ pinctrl-0 = <&pwrbtn>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -133,7 +133,7 @@ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -144,7 +144,7 @@ vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <ð_phy_pwr>; regulator-name = "vcc_phy"; @@ -170,7 +170,7 @@ */ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -236,7 +236,7 @@ phy-supply = <&vcc_phy>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; + snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts index 805c0d26770b..61d1c1028317 100644 --- a/arch/arm/boot/dts/rk3288-fennec.dts +++ b/arch/arm/boot/dts/rk3288-fennec.dts @@ -93,7 +93,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "okay"; @@ -111,7 +111,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; @@ -345,7 +345,7 @@ &usbphy { pinctrl-names = "default"; pinctrl-0 = <&host_drv>; - vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts index 75d77e38e0d6..0195d9721660 100644 --- a/arch/arm/boot/dts/rk3288-firefly-beta.dts +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts @@ -49,7 +49,7 @@ }; &ir { - gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>; }; &pinctrl { diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index d242588bae0d..813496618d08 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -96,7 +96,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 751bee81128e..d0b3204a4799 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -53,7 +53,7 @@ power { wakeup-source; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; pinctrl-names = "default"; @@ -63,14 +63,14 @@ ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; }; leds { compatible = "gpio-leds"; power { - gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; label = "firefly:blue:power"; pinctrl-names = "default"; pinctrl-0 = <&power_led>; @@ -78,7 +78,7 @@ }; work { - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; label = "firefly:blue:user"; linux,default-trigger = "rc-feedback"; pinctrl-names = "default"; @@ -92,7 +92,7 @@ clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable>; - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; sound { @@ -112,7 +112,7 @@ vcc_host_5v: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host_5v"; @@ -133,7 +133,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -146,7 +146,7 @@ vcc_otg_5v: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg_5v"; @@ -159,7 +159,7 @@ dovdd_1v8: dovdd-1v8-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "dovdd_1v8"; @@ -171,7 +171,7 @@ vcc28_dvp: vcc28-dvp-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "vcc28_dvp"; @@ -183,7 +183,7 @@ af_28: af_28-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "af_28"; @@ -195,7 +195,7 @@ dvdd_1v2: af_28-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cif_pwr>; regulator-name = "dvdd_1v2"; @@ -221,7 +221,7 @@ clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio7>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts index c07fe92dc69f..14271be72f30 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dts +++ b/arch/arm/boot/dts/rk3288-firefly.dts @@ -49,7 +49,7 @@ }; &ir { - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; }; &pinctrl { diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 44935af1fb0e..10793ac18599 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -75,7 +75,7 @@ power { wakeup-source; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; pinctrl-names = "default"; @@ -87,7 +87,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; label = "firefly:blue:user"; linux,default-trigger = "rc-feedback"; pinctrl-names = "default"; @@ -95,7 +95,7 @@ }; power { - gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; label = "firefly:green:power"; linux,default-trigger = "default-on"; pinctrl-names = "default"; @@ -114,7 +114,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -145,7 +145,7 @@ vcc_host_5v: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host_5v"; @@ -158,7 +158,7 @@ vcc_otg_5v: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg_5v"; @@ -175,7 +175,7 @@ vcc28_dvp: vcc28-dvp-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "vcc28_dvp"; @@ -213,7 +213,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; @@ -260,7 +260,7 @@ clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio7>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; }; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 441d450fd151..21326f3e8564 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -68,7 +68,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_LOW>; label = "miqi:green:user"; linux,default-trigger = "default-on"; pinctrl-names = "default"; @@ -87,7 +87,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -99,7 +99,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -146,7 +146,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index bc6d10054f6a..aa1f9ecff231 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -180,7 +180,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 RK_PB0 0>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; @@ -205,7 +205,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; @@ -390,7 +390,7 @@ compatible = "asahi-kasei,ak8975"; reg = <0x0d>; interrupt-parent = <&gpio8>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PA1 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&comp_int>; vdd-supply = <&vcc_io>; @@ -409,7 +409,7 @@ compatible = "fsl,mma8452"; reg = <0x1d>; interrupt-parent = <&gpio8>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PA0 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&gsensor_int>; }; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 04faa72dbd95..1145b62edde7 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -68,7 +68,7 @@ pinctrl-0 = <&pwrbtn>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -79,7 +79,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -87,7 +87,7 @@ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -98,7 +98,7 @@ vcc_otg: vcc-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg"; @@ -111,7 +111,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -134,7 +134,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; + snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; @@ -187,7 +187,7 @@ #clock-cells = <0>; clock-output-names = "xin32k"; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index b25ba806d5ee..1c0bbc9b928b 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -51,7 +51,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; }; ext_gmac: external-gmac-clock { @@ -106,7 +106,7 @@ phy-supply = <&vccio_pmu>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins &phy_rst>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; rx_delay = <0x10>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index dd3ad2e93a6d..96a2e745bb93 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -53,13 +53,13 @@ compatible = "gpio-leds"; heartbeat { - gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>; label = "rock2:green:state1"; linux,default-trigger = "heartbeat"; }; mmc { - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; label = "rock2:blue:state2"; linux,default-trigger = "mmc0"; }; @@ -67,7 +67,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -92,13 +92,13 @@ clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable>; - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; vcc_usb_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; /* Always on as the rockchip usb phy doesn't have a vbus-supply @@ -110,7 +110,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -166,7 +166,7 @@ clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi index 6d105914a4f3..280aceae25d5 100644 --- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -17,8 +17,8 @@ rockchip,model = "VEYRON-I2S"; rockchip,i2s-controller = <&i2s>; rockchip,audio-codec = <&max98090>; - rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; - rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>; + rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>; rockchip,headset-codec = <&headsetcodec>; }; }; @@ -28,7 +28,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpio6>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA7 IRQ_TYPE_EDGE_FALLING>; clock-names = "mclk"; clocks = <&cru SCLK_I2S0_OUT>; pinctrl-names = "default"; @@ -41,7 +41,7 @@ compatible = "ti,ts3a227e"; reg = <0x3b>; interrupt-parent = <&gpio0>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ts3a227e_int_l>; ti,micbias = <7>; /* MICBIAS = 2.8V */ diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts index cf5311d2617c..ed4255294ad4 100644 --- a/arch/arm/boot/dts/rk3288-veyron-brain.dts +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts @@ -67,7 +67,7 @@ vcc5_host2: vcc5-host2-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb2_pwr_en>; regulator-name = "vcc5_host2"; @@ -103,8 +103,8 @@ &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; + dvs-gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; /delete-property/ vcc6-supply; @@ -133,7 +133,7 @@ &vcc50_hdmi { enable-active-high; - gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index ce1f87980bcb..d752a315f884 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -91,7 +91,7 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <128>; - enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; backlight-boot-off; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; @@ -102,7 +102,7 @@ gpio-charger { compatible = "gpio-charger"; charger-type = "mains"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&ac_present_ap>; }; @@ -142,7 +142,7 @@ vcc5_host1: vcc5-host1-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host1_pwr_en>; regulator-name = "vcc5_host1"; @@ -154,7 +154,7 @@ vcc5v_otg: vcc5v-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usbotg_pwren_h>; regulator-name = "vcc5_host2"; @@ -190,7 +190,7 @@ pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; lid { label = "Lid"; - gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <0>; /* SW_LID */ linux,input-type = <5>; /* EV_SW */ @@ -228,7 +228,7 @@ reg = <0>; google,cros-ec-spi-pre-delay = <30>; interrupt-parent = <&gpio7>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ec_int>; spi-max-frequency = <3000000>; @@ -247,7 +247,7 @@ compatible = "elan,ekth3000"; reg = <0x15>; interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&trackpad_int>; vcc-supply = <&vcc33_io>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index 3748abf562b1..d33f5763c39c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -57,7 +57,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -68,7 +68,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -80,7 +80,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -134,8 +134,8 @@ &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; regulators { mic_vcc: LDO_REG2 { @@ -160,14 +160,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index f6b2eaaebb9a..cdea751f2a8c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -56,7 +56,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -67,7 +67,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -79,7 +79,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -123,14 +123,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; @@ -197,7 +197,7 @@ trackpad@2c { compatible = "hid-over-i2c"; interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>; reg = <0x2c>; hid-descr-addr = <0x0020>; vcc-supply = <&vcc33_io>; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index f36f6f459225..f0994f0e5774 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -182,8 +182,8 @@ &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; /delete-property/ vcc6-supply; /delete-property/ vcc12-supply; @@ -244,7 +244,7 @@ &vcc50_hdmi { enable-active-high; - gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&power_hdmi_on>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index f72d616d1bf8..544de6027aaa 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -55,7 +55,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -66,7 +66,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -77,7 +77,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -134,14 +134,14 @@ volum_down { label = "Volum_down"; - gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <100>; }; volum_up { label = "Volum_up"; - gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <100>; }; @@ -165,10 +165,10 @@ compatible = "elan,ekth3500"; reg = <0x10>; interrupt-parent = <&gpio2>; - interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&touch_int &touch_rst>; - reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; vcc33-supply = <&vcc33_touch>; vccio-supply = <&vcc33_touch>; }; @@ -211,14 +211,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index d44351ec2333..995cff42fa43 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -76,7 +76,7 @@ pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; }; }; @@ -126,7 +126,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio &sdmmc_wp_gpio &sdmmc_bus4>; - wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>; }; &tsadc { diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index fec076eb7aef..aef07101e9ab 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -115,7 +115,7 @@ cap-mmc-highspeed; cap-sd-highspeed; card-detect-delay = <200>; - cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>; rockchip,default-sample-phase = <90>; num-slots = <1>; sd-uhs-sdr12; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index a0d033f6fe52..cc0b78cefe34 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -57,7 +57,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -68,7 +68,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -80,7 +80,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -126,14 +126,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 2251d28e9d2a..5d1eb0a25827 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -61,7 +61,7 @@ pinctrl-0 = <&pwr_key_l>; power { label = "Power"; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <100>; wakeup-source; @@ -70,7 +70,7 @@ gpio-restart { compatible = "gpio-restart"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&ap_warm_reset_h>; priority = <200>; @@ -80,7 +80,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; }; sdio_pwrseq: sdio-pwrseq { @@ -96,7 +96,7 @@ * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) */ - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; vcc_5v: vcc-5v { @@ -178,7 +178,7 @@ reg = <0x1b>; clock-output-names = "xin32k", "wifibt_32kin"; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 4fad13368a7b..df8a0dbe9d91 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -762,6 +762,15 @@ <&cru SCLK_ISP_JPE>, <&cru SCLK_ISP>, <&cru SCLK_RGA>; + pm_qos = <&qos_vio0_iep>, + <&qos_vio1_vop>, + <&qos_vio1_isp_w0>, + <&qos_vio1_isp_w1>, + <&qos_vio0_vop>, + <&qos_vio0_vip>, + <&qos_vio2_rga_r>, + <&qos_vio2_rga_w>, + <&qos_vio1_isp_r>; }; /* @@ -773,6 +782,8 @@ clocks = <&cru ACLK_HEVC>, <&cru SCLK_HEVC_CABAC>, <&cru SCLK_HEVC_CORE>; + pm_qos = <&qos_hevc_r>, + <&qos_hevc_w>; }; /* @@ -784,6 +795,7 @@ reg = <RK3288_PD_VIDEO>; clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + pm_qos = <&qos_video>; }; /* @@ -793,6 +805,8 @@ pd_gpu@RK3288_PD_GPU { reg = <RK3288_PD_GPU>; clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu_r>, + <&qos_gpu_w>; }; }; @@ -1103,6 +1117,76 @@ }; }; + qos_gpu_r: qos@ffaa0000 { + compatible = "syscon"; + reg = <0xffaa0000 0x20>; + }; + + qos_gpu_w: qos@ffaa0080 { + compatible = "syscon"; + reg = <0xffaa0080 0x20>; + }; + + qos_vio1_vop: qos@ffad0000 { + compatible = "syscon"; + reg = <0xffad0000 0x20>; + }; + + qos_vio1_isp_w0: qos@ffad0100 { + compatible = "syscon"; + reg = <0xffad0100 0x20>; + }; + + qos_vio1_isp_w1: qos@ffad0180 { + compatible = "syscon"; + reg = <0xffad0180 0x20>; + }; + + qos_vio0_vop: qos@ffad0400 { + compatible = "syscon"; + reg = <0xffad0400 0x20>; + }; + + qos_vio0_vip: qos@ffad0480 { + compatible = "syscon"; + reg = <0xffad0480 0x20>; + }; + + qos_vio0_iep: qos@ffad0500 { + compatible = "syscon"; + reg = <0xffad0500 0x20>; + }; + + qos_vio2_rga_r: qos@ffad0800 { + compatible = "syscon"; + reg = <0xffad0800 0x20>; + }; + + qos_vio2_rga_w: qos@ffad0880 { + compatible = "syscon"; + reg = <0xffad0880 0x20>; + }; + + qos_vio1_isp_r: qos@ffad0900 { + compatible = "syscon"; + reg = <0xffad0900 0x20>; + }; + + qos_video: qos@ffae0000 { + compatible = "syscon"; + reg = <0xffae0000 0x20>; + }; + + qos_hevc_r: qos@ffaf0000 { + compatible = "syscon"; + reg = <0xffaf0000 0x20>; + }; + + qos_hevc_w: qos@ffaf0080 { + compatible = "syscon"; + reg = <0xffaf0080 0x20>; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; interrupt-controller; @@ -1110,7 +1194,7 @@ #address-cells = <0>; reg = <0xffc01000 0x1000>, - <0xffc02000 0x1000>, + <0xffc02000 0x2000>, <0xffc04000 0x2000>, <0xffc06000 0x2000>; interrupts = <GIC_PPI 9 0xf04>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index ceb9783ff7e1..22332be72140 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -395,6 +395,16 @@ clock-names = "dma_clk"; }; + /* Place dma1 here despite its address */ + dma1: dma-controller@f0004000 { + compatible = "atmel,sama5d4-dma"; + reg = <0xf0004000 0x1000>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; + }; + pmc: pmc@f0014000 { compatible = "atmel,sama5d2-pmc", "syscon"; reg = <0xf0014000 0x160>; @@ -931,6 +941,22 @@ status = "disabled"; }; + ssc0: ssc@f8004000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf8004000 0x4000>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(21))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(22))>; + dma-names = "tx", "rx"; + clocks = <&ssc0_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + macb0: ethernet@f8008000 { compatible = "atmel,sama5d2-gem"; reg = <0xf8008000 0x1000>; @@ -1141,10 +1167,10 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 + dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(41))>, - <&dma0 + <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(42))>; dma-names = "tx", "rx"; diff --git a/arch/arm/boot/dts/sama5d36ek_cmp.dts b/arch/arm/boot/dts/sama5d36ek_cmp.dts new file mode 100644 index 000000000000..b632143844e5 --- /dev/null +++ b/arch/arm/boot/dts/sama5d36ek_cmp.dts @@ -0,0 +1,87 @@ +/* + * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board + * + * Copyright (C) 2016 Atmel, + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "sama5d36.dtsi" +#include "sama5d3xmb_cmp.dtsi" + +/ { + model = "Atmel SAMA5D36EK-CMP"; + compatible = "atmel,sama5d36ek-cmp", "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index 2511d748867b..186377d41c91 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -55,7 +55,7 @@ uart0: serial@f0024000 { compatible = "atmel,at91sam9260-usart"; - reg = <0xf0024000 0x200>; + reg = <0xf0024000 0x100>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -66,7 +66,7 @@ uart1: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; - reg = <0xf8028000 0x200>; + reg = <0xf8028000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi new file mode 100644 index 000000000000..dc7572bc7ff0 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi @@ -0,0 +1,201 @@ +/* + * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module + * + * Copyright (C) 2016 Atmel, + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + }; + + i2c1: i2c@f0018000 { + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "disabled"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddana_reg: LDO_REG1 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG2 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + }; + }; + }; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0x80000>; + }; + + bootloaderenv@c0000 { + label = "bootloader env"; + reg = <0xc0000 0xc0000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + d2 { + label = "d2"; + gpios = <&pioE 25 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi new file mode 100644 index 000000000000..252e0d35f846 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi @@ -0,0 +1,301 @@ +/* + * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board + * + * Copyright (C) 2016 Atmel, + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sama5d3xcm_cmp.dtsi" + +/ { + compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + mmc0: mmc@f0000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; + }; + }; + + spi0: spi@f0004000 { + dmas = <0>, <0>; /* Do not use DMA for spi0 */ + + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + }; + + ssc0: ssc@f0008000 { + atmel,clk-from-rk-pin; + }; + + /* + * i2c0 conflicts with ISI: + * disable it to allow the use of ISI + * can not enable audio when i2c0 disabled + */ + i2c0: i2c@f0014000 { + wm8904: wm8904@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; + }; + }; + + i2c1: i2c@f0018000 { + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + /* use pck1 for the master clock of ov2640 */ + clocks = <&pck1>; + clock-names = "xvclk"; + assigned-clocks = <&pck1>; + assigned-clock-rates = <25000000>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + }; + + usart1: serial@f0020000 { + dmas = <0>, <0>; /* Do not use DMA for usart1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + status = "okay"; + }; + + isi: isi@f0034000 { + port { + isi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; + }; + }; + }; + + mmc1: mmc@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; + }; + }; + + adc0: adc@f8018000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; + pinctrl-1 = < + &pinctrl_adc0_adtrg_sleep + &pinctrl_adc0_ad0_sleep + &pinctrl_adc0_ad1_sleep + &pinctrl_adc0_ad2_sleep + &pinctrl_adc0_ad3_sleep + &pinctrl_adc0_ad4_sleep + >; + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + /*interrupt-parent = <&pioE>;*/ + /*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/ + reg = <1>; + }; + }; + + pinctrl@fffff200 { + adc0 { + pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 { + atmel,pins = + <AT91_PIOD 19 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad0_sleep: adc0_ad0_1 { + atmel,pins = + <AT91_PIOD 20 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad1_sleep: adc0_ad1_1 { + atmel,pins = + <AT91_PIOD 21 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad2_sleep: adc0_ad2_1 { + atmel,pins = + <AT91_PIOD 22 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad3_sleep: adc0_ad3_1 { + atmel,pins = + <AT91_PIOD 23 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + pinctrl_adc0_ad4_sleep: adc0_ad4_1 { + atmel,pins = + <AT91_PIOD 24 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + }; + + board { + pinctrl_gpio_keys: gpio_keys { + atmel,pins = + <AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = + <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { + atmel,pins = + <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { + atmel,pins = + <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_sensor_reset: sensor_reset-0 { + atmel,pins = + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_sensor_power: sensor_power-0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + }; + }; + + dbgu: serial@ffffee00 { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ + status = "okay"; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb0: gadget@00500000 { + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + }; + + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; + + atmel,model = "wm8904 @ SAMA5D3EK"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + + status = "disabled"; + }; + + /* Conflict with LCD pins */ + gpio_keys { + compatible = "gpio-keys"; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + pb_user1 { + label = "pb_user1"; + gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; + wakeup-source; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 4f60c1b7b137..d3889c9d25a9 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -854,10 +854,10 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8004000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>; - dmas = <&dma1 + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(22))>, - <&dma1 + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(23))>; dma-names = "tx", "rx"; @@ -938,10 +938,10 @@ compatible = "atmel,sama5d4-i2c"; reg = <0xf8018000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>; - dmas = <&dma1 + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(4))>, - <&dma1 + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; @@ -1055,10 +1055,10 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc004000 0x100>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; - dmas = <&dma1 + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(24))>, - <&dma1 + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; dma-names = "tx", "rx"; @@ -1167,10 +1167,10 @@ compatible = "atmel,at91rm9200-spi"; reg = <0xfc01c000 0x100>; interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>; - dmas = <&dma1 + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(14))>, - <&dma1 + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(15))>; dma-names = "tx", "rx"; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index e1267590b575..6b01ab354e88 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -263,7 +263,7 @@ }; mmcif: mmc@e6bd0000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-sh73a0", "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index da689659131f..2c43c4d85dee 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -93,6 +93,14 @@ }; }; + base_fpga_region { + compatible = "fpga-region"; + fpga-mgr = <&fpgamgr0>; + + #address-cells = <0x1>; + #size-cells = <0x1>; + }; + can0: can@ffc00000 { compatible = "bosch,d_can"; reg = <0xffc00000 0x1000>; @@ -513,10 +521,24 @@ }; }; + fpga_bridge0: fpga_bridge@ff400000 { + compatible = "altr,socfpga-lwhps2fpga-bridge"; + reg = <0xff400000 0x100000>; + resets = <&rst LWHPS2FPGA_RESET>; + clocks = <&l4_main_clk>; + }; + + fpga_bridge1: fpga_bridge@ff500000 { + compatible = "altr,socfpga-hps2fpga-bridge"; + reg = <0xff500000 0x10000>; + resets = <&rst HPS2FPGA_RESET>; + clocks = <&l4_main_clk>; + }; + fpgamgr0: fpgamgr@ff706000 { compatible = "altr,socfpga-fpga-mgr"; reg = <0xff706000 0x1000 - 0xffb90000 0x1000>; + 0xffb90000 0x4>; interrupts = <0 175 4>; }; @@ -694,6 +716,11 @@ arm,prefetch-offset = <7>; }; + l3regs@0xff800000 { + compatible = "altr,l3regs", "syscon"; + reg = <0xff800000 0x1000>; + }; + mmc: dwmmc0@ff704000 { compatible = "altr,socfpga-dw-mshc"; reg = <0xff704000 0x1000>; @@ -751,7 +778,7 @@ }; sdr: sdr@ffc25000 { - compatible = "syscon"; + compatible = "altr,sdr-ctl", "syscon"; reg = <0xffc25000 0x1000>; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 551c636a4f01..6b0b7463f36f 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -83,6 +83,14 @@ }; }; + base_fpga_region { + #address-cells = <0x1>; + #size-cells = <0x1>; + + compatible = "fpga-region"; + fpga-mgr = <&fpga_mgr>; + }; + clkmgr@ffd04000 { compatible = "altr,clk-mgr"; reg = <0xffd04000 0x1000>; @@ -400,6 +408,12 @@ }; }; + socfpga_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <0 0 0 0 16 0 0>; + }; + gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x44 0>; @@ -416,6 +430,7 @@ clock-names = "stmmaceth"; resets = <&rst EMAC0_RESET>; reset-names = "stmmaceth"; + snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -435,6 +450,7 @@ clock-names = "stmmaceth"; resets = <&rst EMAC1_RESET>; reset-names = "stmmaceth"; + snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -452,6 +468,7 @@ rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; clock-names = "stmmaceth"; + snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -512,6 +529,15 @@ }; }; + fpga_mgr: fpga-mgr@ffd03000 { + compatible = "altr,socfpga-a10-fpga-mgr"; + reg = <0xffd03000 0x100 + 0xffcfe400 0x20>; + clocks = <&l4_mp_clk>; + resets = <&rst FPGAMGR_RESET>; + reset-names = "fpgamgr"; + }; + i2c0: i2c@ffc02200 { #address-cells = <1>; #size-cells = <0>; @@ -578,7 +604,7 @@ }; sdr: sdr@ffc25000 { - compatible = "syscon"; + compatible = "altr,sdr-ctl", "syscon"; reg = <0xffcfb100 0x80>; }; @@ -605,6 +631,19 @@ status = "disabled"; }; + nand: nand@ffb90000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand"; + reg = <0xffb90000 0x72000>, + <0xffb80000 0x10000>; + reg-names = "nand_data", "denali_reg"; + interrupts = <0 99 4>; + dma-mask = <0xffffffff>; + clocks = <&nand_clk>; + status = "disabled"; + }; + ocram: sram@ffe00000 { compatible = "mmio-sram"; reg = <0xffe00000 0x40000>; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index eb00ae37f316..c57e6cea0d83 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -145,6 +145,11 @@ compatible = "dallas,ds1339"; reg = <0x68>; }; + + ltc@5c { + compatible = "ltc2977"; + reg = <0x5c>; + }; }; &uart1 { @@ -154,3 +159,7 @@ &usb0 { status = "okay"; }; + +&watchdog1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts new file mode 100644 index 000000000000..d14f9ccb6e10 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2015 Altera Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; +#include "socfpga_arria10_socdk.dtsi" + +&nand { + status = "okay"; + + partition@nand-boot { + label = "Boot and fpga data"; + reg = <0x0 0x1C00000>; + }; + partition@nand-rootfs { + label = "Root Filesystem - JFFS2"; + reg = <0x1C00000 0x6400000>; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 1907cc600452..8c037297296c 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -42,3 +42,7 @@ }; }; }; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index f739ead074a2..8672edf9ba4e 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -39,6 +39,29 @@ ethernet0 = &gmac1; }; + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&porta 0 1>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 11 1>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&porta 17 1>; + }; + + hps3 { + label = "hps_led3"; + gpios = <&porta 18 1>; + }; + }; + regulator_3_3v: 3-3-v-regulator { compatible = "regulator-fixed"; regulator-name = "3.3V"; @@ -61,8 +84,28 @@ rxc-skew-ps = <2000>; }; +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + &i2c0 { status = "okay"; + clock-frequency = <100000>; + + /* + * adjust the falling times to decrease the i2c frequency to 50Khz + * because the LCD module does not work at the standard 100Khz + */ + i2c-sda-falling-time-ns = <5000>; + i2c-scl-falling-time-ns = <5000>; eeprom@51 { compatible = "atmel,24c32"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 6306d008f01b..7ea32c81e720 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -39,6 +39,29 @@ ethernet0 = &gmac1; }; + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 15 1>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 14 1>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&portb 13 1>; + }; + + hps3 { + label = "hps_led3"; + gpios = <&portb 12 1>; + }; + }; + regulator_3_3v: 3-3-v-regulator { compatible = "regulator-fixed"; regulator-name = "3.3V"; @@ -47,6 +70,10 @@ }; }; +&can0 { + status = "okay"; +}; + &gmac1 { status = "okay"; phy-mode = "rgmii"; @@ -61,12 +88,28 @@ rxc-skew-ps = <2000>; }; +&gpio0 { + status = "okay"; +}; + &gpio1 { status = "okay"; }; +&gpio2 { + status = "okay"; +}; + &i2c0 { status = "okay"; + clock-frequency = <100000>; + + /* + * adjust the falling times to decrease the i2c frequency to 50Khz + * because the LCD module does not work at the standard 100Khz + */ + i2c-sda-falling-time-ns = <5000>; + i2c-scl-falling-time-ns = <5000>; eeprom@51 { compatible = "atmel,24c32"; @@ -120,6 +163,16 @@ }; }; +&spi0 { + status = "okay"; + + spidev@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index d309314f3a36..82d8c4771293 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -669,6 +669,8 @@ vddulpivio18-supply = <&ab8500_ldo_intcore_reg>; v-ape-supply = <&db8500_vape_reg>; musb_1v8-supply = <&db8500_vsmps2_reg>; + clocks = <&prcmu_clk PRCMU_SYSCLK>; + clock-names = "sysclk"; }; ab8500-ponkey { diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 48dc38482633..f37f9e10713c 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -19,12 +19,6 @@ }; soc { - usb_per5@a03e0000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; - }; - uart@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_default_mode>; @@ -111,6 +105,7 @@ pinctrl-1 = <&i2c3_sleep_mode>; }; + /* ST6G3244ME level translator for 1.8/2.9 V */ vmmci: regulator-gpio { compatible = "regulator-gpio"; @@ -120,7 +115,6 @@ regulator-type = "voltage"; startup-delay-us = <100>; - enable-active-high; states = <1800000 0x1 2900000 0x0>; @@ -197,6 +191,8 @@ stericsson,cpu-dai = <&msp1 &msp3>; stericsson,audio-codec = <&codec>; + clocks = <&prcmu_clk PRCMU_SYSCLK>; + clock-names = "sysclk"; }; msp0: msp@80123000 { @@ -225,6 +221,12 @@ ab8500-gpio { }; + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; + }; + ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index ece222d51717..5882a2606ac3 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -74,6 +74,7 @@ vmmci: regulator-gpio { gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; }; pinctrl { diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 7187676836be..bf259bbd1d0a 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -146,6 +146,7 @@ vmmci: regulator-gpio { gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; }; pinctrl { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 386eee6de232..dd5514def604 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -159,17 +159,13 @@ "", "", "", "", "", "", "", ""; }; - usb_per5@a03e0000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; - }; - sound { compatible = "stericsson,snd-soc-mop500"; stericsson,cpu-dai = <&msp1 &msp3>; stericsson,audio-codec = <&codec>; + clocks = <&prcmu_clk PRCMU_SYSCLK>; + clock-names = "sysclk"; }; msp0: msp@80123000 { @@ -216,11 +212,15 @@ }; }; + /* ST6G3244ME level translator for 1.8/2.9 V */ vmmci: regulator-gpio { compatible = "regulator-gpio"; + /* GPIO228 SD_SEL */ gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + /* GPIO217 MMC_EN */ enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>; + enable-active-high; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2900000>; @@ -228,7 +228,6 @@ regulator-type = "voltage"; startup-delay-us = <100>; - enable-active-high; states = <1800000 0x1 2900000 0x0>; @@ -448,6 +447,12 @@ "PM_GPIO42"; /* AB8500 GPIO42 */ }; + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; + }; + ext_regulators: ab8500-ext-regulators { ab8500_ext1_reg: ab8500_ext1 { regulator-name = "ab8500-ext-supply1"; @@ -546,6 +551,7 @@ sdi0_default_mode: sdi0_default { snowball_mux { function = "mc0"; + /* Add the DAT31 pin even if it is not really used */ groups = "mc0dat31dir_a_1"; }; snowball_cfg1 { diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 0fe03cb88628..d753ac36788f 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -20,30 +20,15 @@ #size-cells = <1>; ranges; - gp0_reserved: rproc@40000000 { + gp0_reserved: rproc@45000000 { compatible = "shared-dma-pool"; - reg = <0x40000000 0x01000000>; + reg = <0x45000000 0x00400000>; no-map; - status = "disabled"; }; - gp1_reserved: rproc@41000000 { + delta_reserved: rproc@44000000 { compatible = "shared-dma-pool"; - reg = <0x41000000 0x01000000>; - no-map; - status = "disabled"; - }; - - audio_reserved: rproc@42000000 { - compatible = "shared-dma-pool"; - reg = <0x42000000 0x01000000>; - no-map; - status = "disabled"; - }; - - dmu_reserved: rproc@43000000 { - compatible = "shared-dma-pool"; - reg = <0x43000000 0x01000000>; + reg = <0x44000000 0x01000000>; no-map; }; }; @@ -703,6 +688,7 @@ compatible = "st,sti-pwm"; #pwm-cells = <2>; reg = <0x9510000 0x68>; + interrupts = <GIC_SPI 131 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1_chan0_default &pinctrl_pwm1_chan1_default @@ -823,37 +809,22 @@ clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>; clock-frequency = <600000000>; st,syscfg = <&syscfg_core 0x22c>; + #mbox-cells = <1>; + mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx"; + mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>; }; - - st231_gp1: remote-processor { + st231_delta: remote-processor { compatible = "st,st231-rproc"; - memory-region = <&gp1_reserved>; - resets = <&softreset STIH407_ST231_GP1_SOFTRESET>; - reset-names = "sw_reset"; - clocks = <&clk_s_c0_flexgen CLK_ST231_GP_1>; - clock-frequency = <600000000>; - st,syscfg = <&syscfg_core 0x220>; - }; - - st231_audio: remote-processor { - compatible = "st,st231-rproc"; - memory-region = <&audio_reserved>; - resets = <&softreset STIH407_ST231_AUD_SOFTRESET>; - reset-names = "sw_reset"; - clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>; - clock-frequency = <600000000>; - st,syscfg = <&syscfg_core 0x228>; - }; - - st231_dmu: remote-processor { - compatible = "st,st231-rproc"; - memory-region = <&dmu_reserved>; + memory-region = <&delta_reserved>; resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; reset-names = "sw_reset"; clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>; clock-frequency = <600000000>; st,syscfg = <&syscfg_core 0x224>; + #mbox-cells = <1>; + mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx"; + mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>; }; /* fdma audio */ @@ -889,6 +860,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; dma-channels = <16>; #dma-cells = <3>; + + status = "disabled"; }; /* fdma free running */ @@ -906,6 +879,8 @@ <&clk_s_c0_flexgen CLK_EXT2F_A9>, <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, <&clk_s_c0_flexgen CLK_EXT2F_A9>; + + status = "disabled"; }; sti_sasg_codec: sti-sasg-codec { diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 118ac284fc4b..83313b51915d 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -60,5 +60,11 @@ ehci1: usb@9a83e00 { status = "okay"; }; + + sti-display-subsystem { + sti-hda@8d02000 { + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 281a12424cf6..3c9672c5b09f 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -131,7 +131,7 @@ <&clk_s_d2_quadfs 0>; assigned-clock-rates = <297000000>, - <108000000>, + <297000000>, <0>, <400000000>, <400000000>; @@ -221,6 +221,7 @@ sti-hda@8d02000 { compatible = "st,stih407-hda"; + status = "disabled"; reg = <0x8d02000 0x400>, <0x92b0120 0x4>; reg-names = "hda-reg", "video-dacs-ctrl"; clock-names = "pix", @@ -232,6 +233,17 @@ <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; }; + + sti-hqvdp@9c000000 { + compatible = "st,stih407-hqvdp"; + reg = <0x9C00000 0x100000>; + clock-names = "hqvdp", "pix_main"; + clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>; + reset-names = "hqvdp"; + resets = <&softreset STIH407_HDQVDP_SOFTRESET>; + st,vtg = <&vtg_main>; + }; }; bdisp0:bdisp@9f10000 { @@ -259,5 +271,15 @@ clocks = <&clk_sysin>; interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; }; + + delta0 { + compatible = "st,st-delta"; + clock-names = "delta", + "delta-st231", + "delta-flash-promip"; + clocks = <&clk_s_c0_flexgen CLK_VID_DMU>, + <&clk_s_c0_flexgen CLK_ST231_DMU>, + <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; + }; }; }; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 5436e880e28f..3c99466989b1 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -70,6 +70,20 @@ dma-ranges = <0xc0000000 0x0 0x10000000>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_vref: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + leds { compatible = "gpio-leds"; green { @@ -107,15 +121,32 @@ usbotg_hs_phy: usbphy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; - clocks = <&rcc 0 30>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>; clock-names = "main_clk"; }; }; +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc3_in8_pin>; + vref-supply = <®_vref>; + status = "okay"; + adc3: adc@200 { + st,adc-channels = <8>; + status = "okay"; + }; +}; + &clk_hse { clock-frequency = <25000000>; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &mac { status = "okay"; pinctrl-0 = <ðernet_mii>; @@ -132,6 +163,10 @@ }; }; +&rtc { + status = "okay"; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 7d0415e80668..9222b9f37bc0 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -94,6 +94,12 @@ clock-frequency = <8000000>; }; +&rtc { + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSI>; + status = "okay"; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index e4dae0eda3cd..ee0da970e8ad 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -48,6 +48,8 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> +#include <dt-bindings/clock/stm32fx-clock.h> +#include <dt-bindings/mfd/stm32f4-rcc.h> / { clocks { @@ -68,6 +70,12 @@ compatible = "fixed-clock"; clock-frequency = <32000>; }; + + clk_i2s_ckin: i2s-ckin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; }; soc { @@ -75,46 +83,227 @@ compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; interrupts = <28>; - clocks = <&rcc 0 128>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>; + status = "disabled"; + }; + + timers2: timers@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000000 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>; + clock-names = "int"; status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32-timer-trigger"; + reg = <1>; + status = "disabled"; + }; }; timer3: timer@40000400 { compatible = "st,stm32-timer"; reg = <0x40000400 0x400>; interrupts = <29>; - clocks = <&rcc 0 129>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>; + status = "disabled"; + }; + + timers3: timers@40000400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000400 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>; + clock-names = "int"; status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32-timer-trigger"; + reg = <2>; + status = "disabled"; + }; }; timer4: timer@40000800 { compatible = "st,stm32-timer"; reg = <0x40000800 0x400>; interrupts = <30>; - clocks = <&rcc 0 130>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>; + status = "disabled"; + }; + + timers4: timers@40000800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000800 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>; + clock-names = "int"; status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32-timer-trigger"; + reg = <3>; + status = "disabled"; + }; }; timer5: timer@40000c00 { compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; interrupts = <50>; - clocks = <&rcc 0 131>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>; + }; + + timers5: timers@40000c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40000C00 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32-timer-trigger"; + reg = <4>; + status = "disabled"; + }; }; timer6: timer@40001000 { compatible = "st,stm32-timer"; reg = <0x40001000 0x400>; interrupts = <54>; - clocks = <&rcc 0 132>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>; status = "disabled"; }; + timers6: timers@40001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001000 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>; + clock-names = "int"; + status = "disabled"; + + timer@5 { + compatible = "st,stm32-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + timer7: timer@40001400 { compatible = "st,stm32-timer"; reg = <0x40001400 0x400>; interrupts = <55>; - clocks = <&rcc 0 133>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>; + status = "disabled"; + }; + + timers7: timers@40001400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001400 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>; + clock-names = "int"; + status = "disabled"; + + timer@6 { + compatible = "st,stm32-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timers@40001800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001800 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM12)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timers@40001c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40001C00 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers14: timers@40002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40002000 0x400>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + rtc: rtc@40002800 { + compatible = "st,stm32-rtc"; + reg = <0x40002800 0x400>; + clocks = <&rcc 1 CLK_RTC>; + clock-names = "ck_rtc"; + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSE>; + interrupt-parent = <&exti>; + interrupts = <17 1>; + interrupt-names = "alarm"; + st,syscfg = <&pwrcfg>; status = "disabled"; }; @@ -122,7 +311,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004400 0x400>; interrupts = <38>; - clocks = <&rcc 0 145>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>; status = "disabled"; }; @@ -130,7 +319,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004800 0x400>; interrupts = <39>; - clocks = <&rcc 0 146>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>; status = "disabled"; dmas = <&dma1 1 4 0x400 0x0>, <&dma1 3 4 0x400 0x0>; @@ -141,7 +330,7 @@ compatible = "st,stm32-uart"; reg = <0x40004c00 0x400>; interrupts = <52>; - clocks = <&rcc 0 147>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART4)>; status = "disabled"; }; @@ -149,7 +338,19 @@ compatible = "st,stm32-uart"; reg = <0x40005000 0x400>; interrupts = <53>; - clocks = <&rcc 0 148>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART5)>; + status = "disabled"; + }; + + i2c1: i2c@40005400 { + compatible = "st,stm32f4-i2c"; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F4_APB1_RESET(I2C1)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -157,7 +358,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40007800 0x400>; interrupts = <82>; - clocks = <&rcc 0 158>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>; status = "disabled"; }; @@ -165,15 +366,57 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40007c00 0x400>; interrupts = <83>; - clocks = <&rcc 0 159>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>; + status = "disabled"; + }; + + timers1: timers@40010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM1)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + }; + + timers8: timers@40010400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40010400 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM8)>; + clock-names = "int"; status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32-timer-trigger"; + reg = <7>; + status = "disabled"; + }; }; usart1: serial@40011000 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40011000 0x400>; interrupts = <37>; - clocks = <&rcc 0 164>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>; status = "disabled"; dmas = <&dma2 2 4 0x400 0x0>, <&dma2 7 4 0x400 0x0>; @@ -184,10 +427,53 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40011400 0x400>; interrupts = <71>; - clocks = <&rcc 0 165>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>; status = "disabled"; }; + adc: adc@40012000 { + compatible = "st,stm32f4-adc-core"; + reg = <0x40012000 0x400>; + interrupts = <18>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; + clock-names = "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc1: adc@0 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; + interrupt-parent = <&adc>; + interrupts = <0>; + status = "disabled"; + }; + + adc2: adc@100 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x100>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>; + interrupt-parent = <&adc>; + interrupts = <1>; + status = "disabled"; + }; + + adc3: adc@200 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x200>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>; + interrupt-parent = <&adc>; + interrupts = <2>; + status = "disabled"; + }; + }; + syscfg: system-config@40013800 { compatible = "syscon"; reg = <0x40013800 0x400>; @@ -201,6 +487,57 @@ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; }; + timers9: timers@40014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014000 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM9)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + + timer@8 { + compatible = "st,stm32-timer-trigger"; + reg = <8>; + status = "disabled"; + }; + }; + + timers10: timers@40014400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014400 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + + timers11: timers@40014800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32-timers"; + reg = <0x40014800 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>; + clock-names = "int"; + status = "disabled"; + + pwm { + compatible = "st,stm32-pwm"; + status = "disabled"; + }; + }; + pwrcfg: power-config@40007000 { compatible = "syscon"; reg = <0x40007000 0x400>; @@ -219,7 +556,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x0 0x400>; - clocks = <&rcc 0 0>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>; st,bank-name = "GPIOA"; }; @@ -227,7 +564,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x400 0x400>; - clocks = <&rcc 0 1>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>; st,bank-name = "GPIOB"; }; @@ -235,7 +572,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x800 0x400>; - clocks = <&rcc 0 2>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>; st,bank-name = "GPIOC"; }; @@ -243,7 +580,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0xc00 0x400>; - clocks = <&rcc 0 3>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>; st,bank-name = "GPIOD"; }; @@ -251,7 +588,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1000 0x400>; - clocks = <&rcc 0 4>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>; st,bank-name = "GPIOE"; }; @@ -259,7 +596,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1400 0x400>; - clocks = <&rcc 0 5>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>; st,bank-name = "GPIOF"; }; @@ -267,7 +604,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1800 0x400>; - clocks = <&rcc 0 6>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>; st,bank-name = "GPIOG"; }; @@ -275,7 +612,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1c00 0x400>; - clocks = <&rcc 0 7>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>; st,bank-name = "GPIOH"; }; @@ -283,7 +620,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2000 0x400>; - clocks = <&rcc 0 8>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>; st,bank-name = "GPIOI"; }; @@ -291,7 +628,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2400 0x400>; - clocks = <&rcc 0 9>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>; st,bank-name = "GPIOJ"; }; @@ -299,7 +636,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2800 0x400>; - clocks = <&rcc 0 10>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>; st,bank-name = "GPIOK"; }; @@ -316,6 +653,19 @@ }; }; + usart3_pins_a: usart3@0 { + pins1 { + pinmux = <STM32F429_PB10_FUNC_USART3_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32F429_PB11_FUNC_USART3_RX>; + bias-disable; + }; + }; + usbotg_hs_pins_a: usbotg_hs@0 { pins { pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>, @@ -355,6 +705,37 @@ slew-rate = <2>; }; }; + + adc3_in8_pin: adc@200 { + pins { + pinmux = <STM32F429_PF10_FUNC_ANALOG>; + }; + }; + + pwm1_pins: pwm@1 { + pins { + pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>, + <STM32F429_PB13_FUNC_TIM1_CH1N>, + <STM32F429_PB12_FUNC_TIM1_BKIN>; + }; + }; + + pwm3_pins: pwm@3 { + pins { + pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>, + <STM32F429_PB5_FUNC_TIM3_CH2>; + }; + }; + + i2c1_pins: i2c1@0 { + pins { + pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>, + <STM32F429_PB6_FUNC_I2C1_SCL>; + bias-disable; + drive-open-drain; + slew-rate = <3>; + }; + }; }; rcc: rcc@40023810 { @@ -362,8 +743,10 @@ #clock-cells = <2>; compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; - clocks = <&clk_hse>; + clocks = <&clk_hse>, <&clk_i2s_ckin>; st,syscfg = <&pwrcfg>; + assigned-clocks = <&rcc 1 CLK_HSE_RTC>; + assigned-clock-rates = <1000000>; }; dma1: dma-controller@40026000 { @@ -377,7 +760,7 @@ <16>, <17>, <47>; - clocks = <&rcc 0 21>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA1)>; #dma-cells = <4>; }; @@ -392,7 +775,7 @@ <68>, <69>, <70>; - clocks = <&rcc 0 22>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2)>; #dma-cells = <4>; st,mem2mem; }; @@ -404,7 +787,9 @@ interrupts = <61>; interrupt-names = "macirq"; clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; - clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(ETHMAC)>, + <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACTX)>, + <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACRX)>; st,syscon = <&syscfg 0x4>; snps,pbl = <8>; snps,mixed-burst; @@ -415,7 +800,7 @@ compatible = "snps,dwc2"; reg = <0x40040000 0x40000>; interrupts = <77>; - clocks = <&rcc 0 29>; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHS)>; clock-names = "otg"; status = "disabled"; }; @@ -424,12 +809,13 @@ compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; interrupts = <80>; - clocks = <&rcc 0 38>; + clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>; + }; }; }; &systick { - clocks = <&rcc 1 0>; + clocks = <&rcc 1 SYSTICK>; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index 8877c00ce8e8..0dd56ef574fa 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -58,7 +58,7 @@ }; memory { - reg = <0x00000000 0x800000>; + reg = <0x00000000 0x1000000>; }; aliases { @@ -78,6 +78,40 @@ clock-frequency = <8000000>; }; +&rtc { + status = "okay"; +}; + +&timers1 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + timer@2 { + status = "okay"; + }; +}; + &usart3 { + pinctrl-0 = <&usart3_pins_a>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 39e368ec3428..f3fc27412a67 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -117,6 +117,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -186,20 +190,43 @@ &pio { emac_power_pin_a1000: emac_power_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; led_pins_a1000: led_pins@0 { - allwinner,pins = "PH10", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH10", "PH20"; + function = "gpio_out"; }; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_usb1_vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 5f98582232d6..942d739a4384 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -127,7 +127,7 @@ &pio { usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; + pins = "PH12"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 023b03efa5ff..17f8c5ec011c 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -142,17 +142,15 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 710e2ef516a8..04e040e6233d 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -165,17 +165,15 @@ &pio { led_pins_cubieboard: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20", "PH21"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index 893497e397da..8317fbfeec4a 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -178,45 +178,35 @@ &pio { bl_en_pin_dsrv9703c: bl_en_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7"; + function = "gpio_out"; }; codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; motor_pins: motor_pins@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB3"; + function = "gpio_out"; }; touchscreen_pins: touchscreen_pins@0 { - allwinner,pins = "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index ac64781a0a9c..9616cdecce93 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -156,10 +156,8 @@ &pio { codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 6de83a6187d0..a48b46474417 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -129,17 +129,13 @@ pinctrl-0 = <&hackberry_hogs>; hackberry_hogs: hogs@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH19"; + function = "gpio_out"; }; usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index 9103864fef90..85dcf81ab64e 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -93,17 +93,15 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; @@ -123,7 +121,7 @@ }; &usb2_vbus_pin_a { - allwinner,pins = "PH6"; + pins = "PH6"; }; &usb_otg { diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index e09053bf5e1f..f3092703a1a6 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -180,31 +180,25 @@ &pio { bl_en_pin_inet: bl_en_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7"; + function = "gpio_out"; }; touchscreen_wake_pin: touchscreen_wake_pin@0 { - allwinner,pins = "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 04b0d2d1ae6c..a1a2bbb3f9d3 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -161,17 +161,15 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index bba4f9cf9bf5..4ef2a60a8cd4 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -320,28 +320,25 @@ &pio { key_pins_inet9f: key_pins@0 { - allwinner,pins = "PA0", "PA1", "PA3", "PA4", - "PA5", "PA6", "PA8", "PA9", - "PA11", "PA12", "PA13", - "PA14", "PA15", "PA16", "PA17", - "PH22", "PH23", "PH24", "PH25", "PH26"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA0", "PA1", "PA3", "PA4", + "PA5", "PA6", "PA8", "PA9", + "PA11", "PA12", "PA13", + "PA14", "PA15", "PA16", "PA17", + "PH22", "PH23", "PH24", "PH25", "PH26"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index e28f080b1fd5..fc4d4d49e2e2 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -163,17 +163,13 @@ &pio { emac_power_pin_q5: emac_power_pin@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH19"; + function = "gpio_out"; }; led_pins_q5: led_pins@0 { - allwinner,pins = "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 8e50723dbe02..a2885039d5f1 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -164,17 +164,14 @@ &pio { led_pins_marsboard: led_pins@0 { - allwinner,pins = "PB5", "PB6", "PB7", "PB8"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB5", "PB6", "PB7", "PB8"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index a7dd86d30fa2..af42ebb3a97b 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -93,7 +93,7 @@ &ir0_rx_pins_a { /* The ir receiver is not always populated */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc0 { diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index ee46ea854832..9c1afd4277d7 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -91,24 +91,18 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH5"; + function = "gpio_in"; }; usb2_vbus_pin_mk802: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index b350448c7217..214a5accfe93 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -168,31 +168,26 @@ &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 39034aa8e1ae..b0365d63ba70 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -170,24 +170,19 @@ &pio { led_pins_pcduino: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15", "PH16"; + function = "gpio_out"; }; key_pins_pcduino: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH17", "PH18", "PH19"; + function = "gpio_in"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts index de483a1bf36a..811d00ee2ade 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts @@ -57,10 +57,8 @@ &pio { usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 { - allwinner,pins = "PD2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index 918f97294b33..bfa6bbdaab27 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -164,38 +164,30 @@ &pio { bl_en_pin_protab: bl_en_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7"; + function = "gpio_out"; }; codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; touchscreen_pins: touchscreen_pins@0 { - allwinner,pins = "PA5", "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA5", "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index b14a4281058d..ba20b48c0702 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -975,190 +975,142 @@ #gpio-cells = <3>; emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + function = "emac"; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB18", "PB19"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB20", "PB21"; + function = "i2c2"; }; ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB4"; + function = "ir0"; }; ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB3"; + function = "ir0"; }; ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB23"; + function = "ir1"; }; ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB22"; + function = "ir1"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH1"; + function = "gpio_in"; + bias-pull-up; }; ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI20", "PI21"; + function = "ps2"; }; ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12", "PH13"; + function = "ps2"; }; pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "pwm"; }; pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI3"; + function = "pwm"; }; spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB13"; - allwinner,function = "spdif"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB13"; + function = "spdif"; + bias-pull-up; }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI11", "PI12", "PI13"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI11", "PI12", "PI13"; + function = "spi0"; }; spi0_cs0_pins_a: spi0_cs0@0 { - allwinner,pins = "PI10"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI10"; + function = "spi0"; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI17", "PI18", "PI19"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI17", "PI18", "PI19"; + function = "spi1"; }; spi1_cs0_pins_a: spi1_cs0@0 { - allwinner,pins = "PI16"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI16"; + function = "spi1"; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PC20", "PC21", "PC22"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC20", "PC21", "PC22"; + function = "spi2"; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PB15", "PB16", "PB17"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB15", "PB16", "PB17"; + function = "spi2"; }; spi2_cs0_pins_a: spi2_cs0@0 { - allwinner,pins = "PC19"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC19"; + function = "spi2"; }; spi2_cs0_pins_b: spi2_cs0@1 { - allwinner,pins = "PB14"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB14"; + function = "spi2"; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB22", "PB23"; + function = "uart0"; }; uart0_pins_b: uart0@1 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF2", "PF4"; + function = "uart0"; }; uart1_pins_a: uart1@0 { - allwinner,pins = "PA10", "PA11"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA10", "PA11"; + function = "uart1"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts index d4ad02182353..a539b72ce093 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -109,17 +109,15 @@ &pio { mmc0_cd_pin_t003: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; led_pins_t003: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; + drive-strength = <20>; }; }; @@ -140,11 +138,11 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG13"; + pins = "PG13"; }; &usb1_vbus_pin_a { - allwinner,pins = "PB10"; + pins = "PB10"; }; &usb_otg { diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index 2150e15e115a..e1b5e8a446fe 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -130,31 +130,26 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG12"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_t004: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 { - allwinner,pins = "PB18"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB18"; + function = "gpio_out"; }; led_pins_t004: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; + drive-strength = <20>; }; }; @@ -175,7 +170,7 @@ }; &usb1_vbus_pin_a { - allwinner,pins = "PG13"; + pins = "PG13"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index c84ac005342e..020aa9d6c31d 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -116,24 +116,19 @@ &pio { led_pins_mk802: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; }; mmc0_cd_pin_mk802: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_mk802: usb1_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB10"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 0684d7930d65..d8245c6314a7 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -202,38 +202,32 @@ &pio { mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG13"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PE3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE3"; + function = "gpio_out"; + drive-strength = <20>; }; usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB10"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG12"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -279,7 +273,7 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG11"; + pins = "PG11"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 3b057983c74a..51371f9b1cf0 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -101,24 +101,20 @@ &pio { mmc0_cd_pin_r7: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-up; }; led_pins_r7: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; + drive-strength = <20>; }; usb1_vbus_pin_r7: usb1_vbus_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG13"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index b5de75f4c710..2b8adda0deda 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -146,24 +146,19 @@ &pio { led_pins_wobo_i5: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "gpio_out"; }; mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB3"; + function = "gpio_in"; + bias-pull-up; }; emac_power_pin_wobo: emac_power_pin@0 { - allwinner,pins = "PA02"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA02"; + function = "gpio_out"; }; }; @@ -223,7 +218,7 @@ }; &usb1_vbus_pin_a { - allwinner,pins = "PG12"; + pins = "PG12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 7aa8c7aa0153..62b3ffe62df2 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -200,61 +200,48 @@ compatible = "allwinner,sun5i-a10s-pinctrl"; uart0_pins_a: uart0@0 { - allwinner,pins = "PB19", "PB20"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB19", "PB20"; + function = "uart0"; }; uart2_pins_a: uart2@0 { - allwinner,pins = "PC18", "PC19"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC18", "PC19"; + function = "uart2"; }; emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", + pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "emac"; }; emac_pins_b: emac0@1 { - allwinner,pins = "PD6", "PD7", "PD10", + pins = "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "emac"; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG3", "PG4", "PG5", + pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc1"; + drive-strength = <30>; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PB12", "PB13", "PB14"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB12", "PB13", "PB14"; + function = "spi2"; }; spi2_cs0_pins_b: spi2_cs0@1 { - allwinner,pins = "PB11"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB11"; + function = "spi2"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index 6efbba6d40a9..42435454acef 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -137,24 +137,21 @@ &pio { mmc0_cd_pin_d709: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -212,7 +209,7 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG12"; + pins = "PG12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 3724b988064e..5879a75cf97a 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -136,24 +136,20 @@ &pio { mmc0_cd_pin_h702: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG1"; + function = "gpio_in"; }; }; @@ -208,7 +204,7 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG12"; + pins = "PG12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts new file mode 100644 index 000000000000..566cda91a66b --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts @@ -0,0 +1,224 @@ +/* + * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * Based on sun5i-a13-olinuxino.dts, which is + * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com> + * Copyright 2013 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Lichee Pi One"; + compatible = "licheepi,licheepi-one", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + red { + label ="licheepi:red:usr"; + gpios = <&pio 2 5 GPIO_ACTIVE_LOW>; + }; + + green { + label ="licheepi:green:usr"; + gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + blue { + label ="licheepi:blue:usr"; + gpios = <&pio 2 4 GPIO_ACTIVE_LOW>; + }; + + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "disabled"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "disabled"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@984 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <984126>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "csi-1.8v"; +}; + +®_ldo4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "csi-2.8v"; +}; + +®_usb0_vbus { + gpio = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 081329e2b80b..60e393e28783 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -115,45 +115,37 @@ &pio { mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxinom: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG9"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG12"; + function = "gpio_out"; }; usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index bb7210e0e4a9..940d47e88056 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -206,38 +206,32 @@ &pio { mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG9"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11"; + function = "gpio_out"; }; }; @@ -277,7 +271,7 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PG12"; + pins = "PG12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index 3d7ff10a48e9..bfdd38d6bfcc 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -80,7 +80,7 @@ }; &codec_pa_pin { - allwinner,pins = "PG3"; + pins = "PG3"; }; &mmc2 { @@ -100,10 +100,9 @@ &pio { i2c_lcd_pins: i2c_lcd_pin@0 { - allwinner,pins = "PG10", "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG10", "PG12"; + function = "gpio_out"; + bias-pull-up; }; }; @@ -131,5 +130,5 @@ }; &usb0_vbus_pin_a { - allwinner,pins = "PB4"; + pins = "PB4"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index a17ba0243db3..4131ab44558b 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -350,26 +350,20 @@ compatible = "allwinner,sun5i-a13-pinctrl"; lcd_rgb666_pins: lcd_rgb666@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; }; uart1_pins_a: uart1@0 { - allwinner,pins = "PE10", "PE11"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE10", "PE11"; + function = "uart1"; }; uart1_pins_b: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG3", "PG4"; + function = "uart1"; }; }; diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts index 92a2dc6250a5..0cf0813d363a 100644 --- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts +++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts @@ -159,17 +159,13 @@ &pio { usb0_id_pin_chip_pro: usb0-id-pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG2"; + function = "gpio_in"; }; wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB10"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 030605aa8065..1a845af4d4db 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -259,31 +259,23 @@ &pio { mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG0"; + function = "gpio_in"; }; usb0_id_pin_gr8_evb: usb0-id-pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG2"; + function = "gpio_in"; }; usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG1"; + function = "gpio_in"; }; usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG13"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi index ea86d4d58db6..f83ae3fc6329 100644 --- a/arch/arm/boot/dts/sun5i-gr8.dtsi +++ b/arch/arm/boot/dts/sun5i-gr8.dtsi @@ -764,150 +764,112 @@ #gpio-cells = <3>; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB15", "PB16"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB17", "PB18"; + function = "i2c2"; }; i2s0_data_pins_a: i2s0-data@0 { - allwinner,pins = "PB6", "PB7", "PB8", "PB9"; - allwinner,function = "i2s0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB6", "PB7", "PB8", "PB9"; + function = "i2s0"; }; i2s0_mclk_pins_a: i2s0-mclk@0 { - allwinner,pins = "PB5"; - allwinner,function = "i2s0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB5"; + function = "i2s0"; }; ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB4"; + function = "ir0"; }; lcd_rgb666_pins: lcd-rgb666@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "lcd0"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc0"; + drive-strength = <30>; }; nand_pins_a: nand-base0@0 { - allwinner,pins = "PC0", "PC1", "PC2", + pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15"; - allwinner,function = "nand0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "nand0"; }; nand_cs0_pins_a: nand-cs@0 { - allwinner,pins = "PC4"; - allwinner,function = "nand0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC4"; + function = "nand0"; }; nand_rb0_pins_a: nand-rb@0 { - allwinner,pins = "PC6"; - allwinner,function = "nand0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC6"; + function = "nand0"; }; pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "pwm0"; }; pwm1_pins: pwm1 { - allwinner,pins = "PG13"; - allwinner,function = "pwm1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG13"; + function = "pwm1"; }; spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB10"; - allwinner,function = "spdif"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB10"; + function = "spdif"; + bias-pull-up; }; uart1_pins_a: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG3", "PG4"; + function = "uart1"; }; uart1_cts_rts_pins_a: uart1-cts-rts@0 { - allwinner,pins = "PG5", "PG6"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG5", "PG6"; + function = "uart1"; }; uart2_pins_a: uart2@1 { - allwinner,pins = "PD2", "PD3"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2", "PD3"; + function = "uart2"; }; uart2_cts_rts_pins_a: uart2-cts-rts@0 { - allwinner,pins = "PD4", "PD5"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD4", "PD5"; + function = "uart2"; }; uart3_pins_a: uart3@1 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG9", "PG10"; + function = "uart3"; }; uart3_cts_rts_pins_a: uart3-cts-rts@0 { - allwinner,pins = "PG11", "PG12"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11", "PG12"; + function = "uart3"; }; }; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index c6da5ad37152..e86fa46fdd45 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -154,7 +154,7 @@ }; &mmc0_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc0 { @@ -177,31 +177,24 @@ &pio { chip_vbus_pin: chip_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB10"; + function = "gpio_out"; }; chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 { - allwinner,pins = "PC19"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC19"; + function = "gpio_out"; }; chip_id_det_pin: chip_id_det_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG2"; + function = "gpio_in"; }; chip_w1_pin: chip_w1_pin@0 { - allwinner,pins = "PD2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PD2"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 82f87cdcd164..8a4d2277826f 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -130,17 +130,14 @@ &pio { codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PG10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10"; + function = "gpio_out"; }; mmc0_cd_pin: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG0"; + function = "gpio_in"; + bias-pull-up; }; ts_power_pin: ts_power_pin { @@ -151,24 +148,20 @@ }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PG1"; + function = "gpio_in"; + bias-pull-down; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PG2"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG12"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index b0fca4ef4dae..c058d37d5433 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -555,86 +555,76 @@ #gpio-cells = <3>; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB15", "PB16"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB17", "PB18"; + function = "i2c2"; }; lcd_rgb565_pins: lcd_rgb565@0 { - allwinner,pins = "PD3", "PD4", "PD5", "PD6", "PD7", + pins = "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD19", "PD20", "PD21", "PD22", "PD23", "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "lcd0"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", "PC13", - "PC14", "PC15"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_4bit_pins_a: mmc2-4bit@0 { + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PE1", "PE2", "PE3"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE1", "PE2", "PE3"; + function = "spi2"; }; spi2_cs0_pins_a: spi2-cs0@0 { - allwinner,pins = "PE0"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE0"; + function = "spi2"; }; uart3_pins_a: uart3@0 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG9", "PG10"; + function = "uart3"; }; uart3_pins_cts_rts_a: uart3-cts-rts@0 { - allwinner,pins = "PG11", "PG12"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11", "PG12"; + function = "uart3"; }; pwm0_pins: pwm0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "pwm"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index 2f8cfab771e2..effbdc766938 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -68,10 +68,8 @@ &pio { usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH27"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index f9cf36888d93..f5ececd45bc0 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -124,29 +124,25 @@ }; &mmc0_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &pio { mmc0_cd_pin_colombus: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; usb2_vbus_pin_colombus: usb2_vbus_pin@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; i2c_lcd_pins: i2c_lcd_pin@0 { - allwinner,pins = "PA23", "PA24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA23", "PA24"; + function = "gpio_out"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 7cae328398b1..f094eeb6c499 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -205,7 +205,7 @@ &mmc0_pins_a { /* external pull-ups missing for some pins */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc1 { @@ -224,24 +224,19 @@ &pio { gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 { - allwinner,pins = "PA21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA21"; + function = "gpio_out"; }; mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; wifi_reset_pin_hummingbird: wifi_reset_pin@0 { - allwinner,pins = "PG10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10"; + function = "gpio_out"; }; }; @@ -253,6 +248,7 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; }; }; @@ -311,6 +307,11 @@ regulator-name = "vcc-dram"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_usb1_vbus { gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ status = "okay"; @@ -335,12 +336,25 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usb1_vbus_pin_a { /* different pin from sunxi-common-regulators */ - allwinner,pins = "PH24"; + pins = "PH24"; }; &usbphy { + usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index e9185dad67ee..2bc57d2dcd80 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -69,6 +69,29 @@ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&codec { + allwinner,audio-routing = + "Headphone", "HP"; + status = "okay"; }; &ehci0 { @@ -109,24 +132,19 @@ &pio { led_pins_i7: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_i7: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH22"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_i7: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC27"; + function = "gpio_out"; }; }; @@ -137,6 +155,13 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_pins_a>; + spdif-out = "okay"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 29016a13a2c1..8af5b667a46d 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -128,24 +128,19 @@ &pio { led_pins_m9: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_m9: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH22"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_m9: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC27"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index 5faeae429e2a..bf0f5831126f 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -128,24 +128,19 @@ &pio { led_pins_m9: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_m9: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH22"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_m9: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC27"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index e78faaf9243c..a4b96184cac1 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -480,130 +480,121 @@ #gpio-cells = <3>; gmac_pins_gmii_a: gmac_gmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", + pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PA16", "PA17", "PA18", "PA19", "PA20", "PA21", "PA22", "PA23", "PA24", "PA25", "PA26", "PA27"; - allwinner,function = "gmac"; + function = "gmac"; /* * data lines in GMII mode run at 125MHz and * might need a higher signal drive strength */ - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + drive-strength = <30>; }; gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", + pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", "PA12", "PA13", "PA14", "PA19", "PA20", "PA21", "PA22", "PA23", "PA24", "PA26", "PA27"; - allwinner,function = "gmac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "gmac"; }; gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", + pins = "PA0", "PA1", "PA2", "PA3", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA19", "PA20", "PA25", "PA26", "PA27"; - allwinner,function = "gmac"; + function = "gmac"; /* * data lines in RGMII mode use DDR mode * and need a higher signal drive strength */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + drive-strength = <40>; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PH14", "PH15"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH14", "PH15"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PH16", "PH17"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH16", "PH17"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PH18", "PH19"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH18", "PH19"; + function = "i2c2"; }; lcd0_rgb888_pins: lcd0_rgb888 { - allwinner,pins = "PD0", "PD1", "PD2", "PD3", + pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "lcd0"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0", "PG1", "PG2", "PG3", + pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", + pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_emmc_pins: mmc2@1 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", + pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC24"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; mmc3_8bit_emmc_pins: mmc3@1 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", + pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC24"; - allwinner,function = "mmc3"; - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc3"; + drive-strength = <40>; + bias-pull-up; + }; + + spdif_pins_a: spdif@0 { + pins = "PH28"; + function = "spdif"; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20", "PH21"; + function = "uart0"; }; }; @@ -623,6 +614,19 @@ reg = <0x01c20ca0 0x20>; }; + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_APB1_SPDIF>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>, <&dma 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + lradc: lradc@01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; @@ -862,7 +866,7 @@ gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -1076,17 +1080,13 @@ #gpio-cells = <3>; ir_pins_a: ir@0 { - allwinner,pins = "PL4"; - allwinner,function = "s_ir"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL4"; + function = "s_ir"; }; p2wi_pins: p2wi { - allwinner,pins = "PL0", "PL1"; - allwinner,function = "s_p2wi"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL0", "PL1"; + function = "s_p2wi"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 73c133f5e79c..2238eda318f6 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -134,24 +134,20 @@ &pio { gt911_int_primo81: gt911_int_pin@0 { - allwinner,pins = "PA3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA3"; + function = "gpio_in"; }; mma8452_int_primo81: mma8452_int_pin@0 { - allwinner,pins = "PA9"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA9"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_primo81: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index c35ec112f5a0..7ff68bdd7109 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -136,17 +136,14 @@ &pio { led_pin_sina31s: led_pin@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_sina31s: mmc0_cd_pin@0 { - allwinner,pins = "PA4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA4"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -156,6 +153,11 @@ regulator-name = "vcc-gmac-phy"; }; +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index db7fa13f5425..3bd862bf82a9 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -122,7 +122,7 @@ }; &mmc0_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc2 { @@ -144,7 +144,7 @@ }; &mmc2_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -153,33 +153,26 @@ &pio { gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { - allwinner,pins = "PA21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA21"; + function = "gpio_out"; }; led_pins_bpi_m2: led_pins@0 { - allwinner,pins = "PG5", "PG10", "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG5", "PG10", "PG11"; + function = "gpio_out"; }; mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { - allwinner,pins = "PA4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA4"; + function = "gpio_in"; + bias-pull-up; }; }; &r_pio { mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 { - allwinner,pins = "PL8"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL8"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index d6ad6196a768..154ebf5082ed 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -92,10 +92,9 @@ &pio { mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -110,7 +109,7 @@ }; &mmc0_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &p2wi { diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 0c434304e040..edaba5f904fd 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -77,17 +77,15 @@ &pio { mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PA15"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 532f1a160560..08e776ae095a 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -183,7 +183,7 @@ &mmc3_pins_a { /* AP6210 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -200,31 +200,24 @@ &pio { gmac_power_pin_bpi_m1p: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_bpi_m1p: led_pins@0 { - allwinner,pins = "PH24", "PH25"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24", "PH25"; + function = "gpio_out"; }; mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 67c8a7644b99..91f2e5f9efcb 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -179,31 +179,25 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; gmac_power_pin_bananapi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_bananapi: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 18fcc87f4621..83516bc81225 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -76,6 +76,13 @@ }; }; + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_bananapro>; + reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; + }; + reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -87,23 +94,16 @@ enable-active-high; gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; }; - - reg_vmmc3: vmmc3 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_bananapro>; - regulator-name = "vmmc3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; - }; }; &ahci { status = "okay"; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -166,10 +166,19 @@ &mmc3 { pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; }; &ohci0 { @@ -182,45 +191,34 @@ &pio { gmac_power_pin_bananapro: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_bananapro: led_pins@0 { - allwinner,pins = "PH24", "PG2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24", "PG2"; + function = "gpio_out"; }; mmc0_cd_pin_bananapro: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - allwinner,pins = "PH0"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH0"; + function = "gpio_out"; }; usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH1"; + function = "gpio_out"; }; vmmc3_pin_bananapro: vmmc3_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 1fa832d7b469..4dc1e10f88c4 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -160,17 +160,14 @@ &pio { led_pins_cubieboard2: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20", "PH21"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 83f39b0362cb..f019aa3fe96d 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -207,7 +207,7 @@ &mmc3_pins_a { /* AP6210 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -224,45 +224,33 @@ &pio { ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; led_pins_cubietruck: led_pins@0 { - allwinner,pins = "PH7", "PH11", "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7", "PH11", "PH20", "PH21"; + function = "gpio_out"; }; mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9"; + function = "gpio_out"; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH17"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH19"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 37f4a5497452..e921ba42f170 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -188,31 +188,23 @@ &pio { ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; }; mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9"; + function = "gpio_out"; }; gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { - allwinner,pins = "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH16"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 1e6bd360dac0..385fd8232ae0 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -185,7 +185,7 @@ &mmc3_pins_a { /* AP6210 / AP6330 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -198,31 +198,23 @@ &pio { vmmc3_pin_i12_tvbox: vmmc3_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; }; vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12"; + function = "gpio_out"; }; gmac_power_pin_i12_tvbox: gmac_power_pin@0 { - allwinner,pins = "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH21"; + function = "gpio_out"; }; led_pins_i12_tvbox: led_pins@0 { - allwinner,pins = "PH9", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9", "PH20"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index 10d48cbf81ff..d52222c82cb8 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -131,10 +131,9 @@ &pio { led_pins_itead_core: led_pins@0 { - allwinner,pins = "PH20","PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20","PH21"; + function = "gpio_out"; + drive-strength = <20>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 73c05dab0a69..72ec0d5ae052 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -87,7 +87,7 @@ }; &ahci_pwr_pin_a { - allwinner,pins = "PB3"; + pins = "PB3"; }; &ahci { @@ -222,31 +222,25 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; gmac_power_pin_lamobo_r1: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_lamobo_r1: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; }; @@ -327,7 +321,7 @@ }; &usb2_vbus_pin_a { - allwinner,pins = "PH12"; + pins = "PH12"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 8d9ea48dd98c..0e074bd0e8c9 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -145,10 +145,8 @@ &pio { led_pins_m3: led_pins@0 { - allwinner,pins = "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH20"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index 90ff4a267025..97d7a8b65a03 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -132,17 +132,13 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH5"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index 134e0c1b129d..a1450c10b08e 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -120,6 +120,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + &lradc { vref-supply = <®_vcc3v0>; status = "okay"; @@ -208,38 +220,30 @@ &pio { ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olimex_som_evb: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 { - allwinner,pins = "PH0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH0"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4"; + function = "gpio_in"; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH5"; + function = "gpio_in"; }; }; @@ -288,12 +292,38 @@ status = "okay"; }; +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>, + <&spi1_cs0_pins_a>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pins_a>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + &usb_otg { dr_mode = "otg"; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 35ad7006c53c..1297432c2802 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -153,31 +153,26 @@ &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts index 10d307408f23..81f376f2a44d 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -57,10 +57,8 @@ &pio { mmc2_pins_nrst: mmc2-rst-pin { - allwinner,pins = "PC16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC16"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index d5c796c8d16f..71cca5360728 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -112,57 +112,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - - acin-supply = <®_axp_ipsout>; - vin2-supply = <®_axp_ipsout>; - vin3-supply = <®_axp_ipsout>; - ldo24in-supply = <®_axp_ipsout>; - ldo3in-supply = <®_axp_ipsout>; - - regulators { - vdd_rtc: ldo1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - }; - - avcc: ldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vcc_csi0: ldo3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - - vcc_csi1: ldo4 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_cpu: dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <2275000>; - regulator-always-on; - }; - - vdd_int: dcdc3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - }; }; }; @@ -202,38 +154,31 @@ &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC3"; + function = "gpio_out"; }; led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; usb0_vbus_pin_lime2: usb0_vbus_pin@0 { - allwinner,pins = "PC17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC17"; + function = "gpio_out"; }; }; @@ -243,6 +188,48 @@ status = "okay"; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vddio-csi0"; +}; + +®_ldo4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vddio-csi1"; +}; + ®_usb0_vbus { pinctrl-0 = <&usb0_vbus_pin_lime2>; gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 7e3006f6a775..223fbd9f7c62 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -227,31 +227,27 @@ &pio { mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH11"; + function = "gpio_in"; + bias-pull-up; }; led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; + drive-strength = <20>; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 2be04c438b1e..a74265749227 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -166,52 +166,41 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; mmc3_cd_pin_orangepi: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH11"; + function = "gpio_in"; + bias-pull-up; }; usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_out"; }; gmac_power_pin_orangepi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_orangepi: led_pins@0 { - allwinner,pins = "PH24", "PH25"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24", "PH25"; + function = "gpio_out"; }; usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - allwinner,pins = "PH26"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH26"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 71125bf64575..3de980c8f8ff 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -147,45 +147,35 @@ &pio { usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH10"; + function = "gpio_in"; + bias-pull-up; }; usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH22"; + function = "gpio_out"; }; gmac_power_pin_orangepi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH23"; + function = "gpio_out"; }; led_pins_orangepi: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH24"; + function = "gpio_out"; }; usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - allwinner,pins = "PH26"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH26"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index ddac7328b852..f47a5c46bc20 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -152,31 +152,24 @@ &pio { ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2"; + function = "gpio_out"; }; led_pins_pcduino3_nano: led_pins@0 { - allwinner,pins = "PH16", "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH16", "PH15"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { - allwinner,pins = "PD2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 1a8b39be1d61..4599f98a3aee 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -108,7 +108,7 @@ }; &ahci_pwr_pin_a { - allwinner,pins = "PH2"; + pins = "PH2"; }; &codec { @@ -183,24 +183,19 @@ &pio { led_pins_pcduino3: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15", "PH16"; + function = "gpio_out"; }; key_pins_pcduino3: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH17", "PH18", "PH19"; + function = "gpio_in"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index 2f6b21adddd9..e19f17177755 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -173,31 +173,24 @@ &pio { bl_enable_pin: bl_enable_pin@0 { - allwinner,pins = "PH7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH7"; + function = "gpio_out"; }; codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH15"; + function = "gpio_out"; }; ts_reset_pin: ts_reset_pin@0 { - allwinner,pins = "PB13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB13"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index dc31d476ef81..c3078d4f1093 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -160,17 +160,14 @@ &pio { vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH9"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index f7db067b0de0..2db97fc820dd 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -871,6 +871,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <4>; }; spi1: spi@01c06000 { @@ -885,6 +886,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <1>; }; emac: ethernet@01c0b000 { @@ -1037,6 +1039,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <1>; }; ahci: sata@01c18000 { @@ -1079,6 +1082,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + num-cs = <1>; }; pio: pinctrl@01c20800 { @@ -1093,302 +1097,231 @@ #gpio-cells = <3>; clk_out_a_pins_a: clk_out_a@0 { - allwinner,pins = "PI12"; - allwinner,function = "clk_out_a"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI12"; + function = "clk_out_a"; }; clk_out_b_pins_a: clk_out_b@0 { - allwinner,pins = "PI13"; - allwinner,function = "clk_out_b"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI13"; + function = "clk_out_b"; }; emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + function = "emac"; }; gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "gmac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + function = "gmac"; }; gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA10", - "PA11", "PA12", "PA13", - "PA15", "PA16"; - allwinner,function = "gmac"; + pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA10", + "PA11", "PA12", "PA13", + "PA15", "PA16"; + function = "gmac"; /* * data lines in RGMII mode use DDR mode * and need a higher signal drive strength */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + drive-strength = <40>; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB18", "PB19"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB20", "PB21"; + function = "i2c2"; }; i2c3_pins_a: i2c3@0 { - allwinner,pins = "PI0", "PI1"; - allwinner,function = "i2c3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI0", "PI1"; + function = "i2c3"; }; ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB4"; + function = "ir0"; }; ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB3"; + function = "ir0"; }; ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB23"; + function = "ir1"; }; ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB22"; + function = "ir1"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH1"; + function = "gpio_in"; + bias-pull-up; }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", - "PC9", "PC10", "PC11"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PC6", "PC7", "PC8", + "PC9", "PC10", "PC11"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4", "PI5", "PI6", - "PI7", "PI8", "PI9"; - allwinner,function = "mmc3"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; + function = "mmc3"; + drive-strength = <30>; + bias-pull-up; }; ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI20", "PI21"; + function = "ps2"; }; ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12", "PH13"; + function = "ps2"; }; pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB2"; + function = "pwm"; }; pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI3"; + function = "pwm"; }; spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB13"; - allwinner,function = "spdif"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB13"; + function = "spdif"; + bias-pull-up; }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI11", "PI12", "PI13"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI11", "PI12", "PI13"; + function = "spi0"; }; spi0_cs0_pins_a: spi0_cs0@0 { - allwinner,pins = "PI10"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI10"; + function = "spi0"; }; spi0_cs1_pins_a: spi0_cs1@0 { - allwinner,pins = "PI14"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI14"; + function = "spi0"; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI17", "PI18", "PI19"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI17", "PI18", "PI19"; + function = "spi1"; }; spi1_cs0_pins_a: spi1_cs0@0 { - allwinner,pins = "PI16"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI16"; + function = "spi1"; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PC20", "PC21", "PC22"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC20", "PC21", "PC22"; + function = "spi2"; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PB15", "PB16", "PB17"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB15", "PB16", "PB17"; + function = "spi2"; }; spi2_cs0_pins_a: spi2_cs0@0 { - allwinner,pins = "PC19"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC19"; + function = "spi2"; }; spi2_cs0_pins_b: spi2_cs0@1 { - allwinner,pins = "PB14"; - allwinner,function = "spi2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB14"; + function = "spi2"; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB22", "PB23"; + function = "uart0"; }; uart2_pins_a: uart2@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI16", "PI17", "PI18", "PI19"; + function = "uart2"; }; uart3_pins_a: uart3@0 { - allwinner,pins = "PG6", "PG7", "PG8", "PG9"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG6", "PG7", "PG8", "PG9"; + function = "uart3"; }; uart3_pins_b: uart3@1 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH0", "PH1"; + function = "uart3"; }; uart4_pins_a: uart4@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "uart4"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10", "PG11"; + function = "uart4"; }; uart4_pins_b: uart4@1 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "uart4"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4", "PH5"; + function = "uart4"; }; uart5_pins_a: uart5@0 { - allwinner,pins = "PI10", "PI11"; - allwinner,function = "uart5"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI10", "PI11"; + function = "uart5"; }; uart6_pins_a: uart6@0 { - allwinner,pins = "PI12", "PI13"; - allwinner,function = "uart6"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI12", "PI13"; + function = "uart6"; }; uart7_pins_a: uart7@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "uart7"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PI20", "PI21"; + function = "uart7"; }; }; @@ -1686,9 +1619,9 @@ }; gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index e4991a78ad73..a952cc0703cc 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -84,7 +84,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; @@ -106,14 +106,16 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; - osc32k: osc32k_clk { + ext_osc32k: ext_osc32k_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <50000>; + clock-output-names = "ext-osc32k"; }; }; @@ -256,7 +258,7 @@ ccu: clock@01c20000 { reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -266,7 +268,7 @@ /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; /* interrupts get set in SoC specific dtsi file */ - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -274,88 +276,72 @@ #gpio-cells = <3>; uart0_pins_a: uart0@0 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF2", "PF4"; + function = "uart0"; }; uart1_pins_a: uart1@0 { - allwinner,pins = "PG6", "PG7"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG6", "PG7"; + function = "uart1"; }; uart1_pins_cts_rts_a: uart1-cts-rts@0 { - allwinner,pins = "PG8", "PG9"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG8", "PG9"; + function = "uart1"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0", "PG1", "PG2", - "PG3", "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG0", "PG1", "PG2", + "PG3", "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_pins: mmc2_8bit { - allwinner,pins = "PC5", "PC6", "PC8", - "PC9", "PC10", "PC11", - "PC12", "PC13", "PC14", - "PC15", "PC16"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; pwm0_pins: pwm0 { - allwinner,pins = "PH0"; - allwinner,function = "pwm0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH0"; + function = "pwm0"; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PH2", "PH3"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH2", "PH3"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4", "PH5"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PE12", "PE13"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE12", "PE13"; + function = "i2c2"; }; lcd_rgb666_pins: lcd-rgb666@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - allwinner,function = "lcd0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; }; }; @@ -486,10 +472,36 @@ #size-cells = <0>; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun8i-a23-mali", + "allwinner,sun7i-a20-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <408000000>; + }; + gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -502,6 +514,9 @@ reg = <0x01f00000 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "osc32k"; + clocks = <&ext_osc32k>; + #clock-cells = <1>; }; nmi_intc: interrupt-controller@01f00c0c { @@ -554,6 +569,10 @@ compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; + + codec_analog: codec-analog { + compatible = "allwinner,sun8i-a23-codec-analog"; + }; }; cpucfg@01f01c00 { @@ -576,7 +595,7 @@ compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; @@ -587,17 +606,15 @@ #gpio-cells = <3>; r_rsb_pins: r_rsb { - allwinner,pins = "PL0", "PL1"; - allwinner,function = "s_rsb"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PL0", "PL1"; + function = "s_rsb"; + drive-strength = <20>; + bias-pull-up; }; r_uart_pins_a: r_uart@0 { - allwinner,pins = "PL2", "PL3"; - allwinner,function = "s_uart"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL2", "PL3"; + function = "s_uart"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts index 610786e635fa..c21f5b1b255e 100644 --- a/arch/arm/boot/dts/sun8i-a23-evb.dts +++ b/arch/arm/boot/dts/sun8i-a23-evb.dts @@ -115,10 +115,9 @@ &pio { mmc0_cd_pin_evb: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB4"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts index 21bb291b9568..649e31339662 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -86,15 +86,13 @@ }; &mmc1_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &r_pio { wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 { - allwinner,pins = "PL6"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL6"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts index 9955f85f9147..6b3bcae089f2 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -79,15 +79,13 @@ }; &mmc1_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &r_pio { wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 { - allwinner,pins = "PL6"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL6"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts index 956320a6cc78..3ab5c0c09d93 100644 --- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -48,3 +48,26 @@ model = "Q8 A23 Tablet"; compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; }; + +&codec { + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + allwinner,audio-routing = + "Headphone", "HP", + "Headphone", "HPCOM", + "Speaker", "HP", + "MIC1", "Mic", + "MIC2", "Headset Mic", + "Mic", "MBIAS", + "Headset Mic", "HBIAS"; + status = "okay"; +}; + +&pio { + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 54d045dab825..4d1f929780a8 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -48,6 +48,22 @@ memory { reg = <0x40000000 0x40000000>; }; + + soc@01c00000 { + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a23-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + }; }; &ccu { diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts index fb4665576dff..3e05959104f1 100644 --- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts +++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts @@ -71,7 +71,7 @@ }; &mmc1_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc1 { @@ -89,10 +89,9 @@ &r_pio { led_pin_d978: led_pin_d978@0 { - allwinner,pins = "PL5"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL5"; + function = "gpio_out"; + drive-strength = <20>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts index 9ea637e82b2d..be9a6b8d7a1e 100644 --- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -92,24 +92,18 @@ &pio { led_pin_olinuxino: led_pins@0 { - allwinner,pins = "PB7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB7"; + function = "gpio_out"; }; mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB4"; + function = "gpio_in"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB3"; + function = "gpio_in"; }; }; @@ -126,7 +120,7 @@ }; }; -#include "axp22x.dtsi" +#include "axp223.dtsi" ®_aldo1 { regulator-always-on; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 71bb9418c5f9..03b89bdd55ba 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -61,6 +61,35 @@ chosen { stdout-path = "serial0:115200n8"; }; + + panel { + compatible = "netron-dy,e231732"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_panel>; + }; + }; + }; +}; + +&codec { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&dai { + status = "okay"; }; &ehci0 { @@ -115,9 +144,9 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; /* eMMC is missing pull-ups */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &ohci0 { @@ -126,10 +155,9 @@ &pio { mmc0_cd_pin_sina33: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB4"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -145,7 +173,7 @@ }; }; -#include "axp22x.dtsi" +#include "axp223.dtsi" ®_aldo1 { regulator-always-on; @@ -207,6 +235,23 @@ regulator-name = "vcc-rtc"; }; +&sound { + status = "okay"; +}; + +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_b>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index fd1e1cddd4a8..18c174fef84f 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -45,7 +45,42 @@ #include "sun8i-a23-a33.dtsi" / { + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@648000000 { + opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1200000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1320000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; + cpus { + cpu@0 { + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + }; + cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; @@ -69,6 +104,28 @@ reg = <0x40000000 0x80000000>; }; + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sun8i-a33-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&link_codec>; + simple-audio-card,bitclock-master = <&link_codec>; + simple-audio-card,mclk-fs = <512>; + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,routing = + "Left DAC", "Digital Left DAC", + "Right DAC", "Digital Right DAC"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&dai>; + }; + + link_codec: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + soc@01c00000 { tcon0: lcd-controller@01c0c000 { compatible = "allwinner,sun8i-a33-tcon"; @@ -116,6 +173,29 @@ reset-names = "ahb"; }; + dai: dai@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22c00 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + codec: codec@01c22e00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a33-codec"; + reg = <0x01c22e00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "bus", "mod"; + status = "disabled"; + }; + fe0: display-frontend@01e00000 { compatible = "allwinner,sun8i-a33-display-frontend"; reg = <0x01e00000 0x20000>; @@ -238,10 +318,8 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; uart0_pins_b: uart0@1 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB0", "PB1"; + function = "uart0"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index d3473f81b12f..a789a7caf217 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -167,25 +167,21 @@ #gpio-cells = <3>; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF2", "PF4"; + function = "uart0"; }; uart0_pins_b: uart0@1 { - allwinner,pins = "PB9", "PB10"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB9", "PB10"; + function = "uart0"; }; }; @@ -217,7 +213,7 @@ gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts new file mode 100644 index 000000000000..b7ca916d871d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * Based on sun8i-h3-orangepi-one.dts, which is: + * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Xunlong Orange Pi Zero"; + compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus"; + + aliases { + serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet1 = &xr819; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status_led { + label = "orangepi:red:status"; + gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_vcc_wifi: reg_vcc_wifi { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + enable-active-high; + gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <200>; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + xr819: sdio_wifi@1 { + reg = <1>; + }; +}; + +&mmc1_pins_a { + bias-pull-up; +}; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index 06fddaae8edd..c0c49dd4d3b2 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -156,24 +156,18 @@ &r_pio { pwr_led_bpi_m2p: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_bpi_m2p: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; wifi_en_bpi_m2p: wifi_en_pin { - allwinner,pins = "PL7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL7"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts new file mode 100644 index 000000000000..25b225b7dfd6 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Beelink X2"; + compatible = "roofull,beelink-x2", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet1 = &sdiowifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "beelink-x2:blue:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + red { + label = "beelink-x2:red:standby"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; + + sound_spdif { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + sdiowifi: sdio_wifi@1 { + reg = <1>; + }; +}; + +&ohci1 { + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is on as long as VCC-IO is on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index 8038aa29a5a7..2216e68d1838 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -110,26 +110,20 @@ &pio { leds_npi: led_pins@0 { - allwinner,pins = "PA10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA10"; + function = "gpio_out"; }; }; &r_pio { leds_r_npi: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_npi: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index e5bcaba3e87f..047e9e1c6093 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -145,33 +145,25 @@ &pio { leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL3", "PL4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3", "PL4"; + function = "gpio_in"; }; wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 { - allwinner,pins = "PL7"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL7"; + function = "gpio_out"; }; }; @@ -205,7 +197,7 @@ }; &usb1_vbus_pin_a { - allwinner,pins = "PG13"; + pins = "PG13"; }; &usbphy { diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts index 1550fee1ec68..22b99b407019 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -143,26 +143,20 @@ &pio { leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 5c9b5bfa5c21..34da853ee037 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -110,26 +110,20 @@ &pio { leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 851fd2c2cc8c..8b93f5c781a7 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -82,7 +82,7 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; /* eMMC is missing pull-ups */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 3ec971285aa3..d43978d3294e 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -90,6 +90,14 @@ }; }; +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -132,26 +140,20 @@ &pio { leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL10"; + function = "gpio_out"; }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL3"; + function = "gpio_in"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index bb585918cf54..8c40ab7bfa72 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -76,17 +76,15 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; /* eMMC is missing pull-ups */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &pio { usb3_vbus_pin_a: usb3_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG11"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 6c14a6f72820..27780b97c863 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -329,106 +329,90 @@ #interrupt-cells = <3>; i2c0_pins: i2c0 { - allwinner,pins = "PA11", "PA12"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA11", "PA12"; + function = "i2c0"; }; i2c1_pins: i2c1 { - allwinner,pins = "PA18", "PA19"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA18", "PA19"; + function = "i2c1"; }; i2c2_pins: i2c2 { - allwinner,pins = "PE12", "PE13"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE12", "PE13"; + function = "i2c2"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc0_cd_pin: mmc0_cd_pin@0 { - allwinner,pins = "PF6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PF6"; + function = "gpio_in"; + bias-pull-up; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0", "PG1", "PG2", "PG3", - "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_pins: mmc2_8bit { - allwinner,pins = "PC5", "PC6", "PC8", - "PC9", "PC10", "PC11", - "PC12", "PC13", "PC14", - "PC15", "PC16"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + spdif_tx_pins_a: spdif@0 { + pins = "PA17"; + function = "spdif"; }; spi0_pins: spi0 { - allwinner,pins = "PC0", "PC1", "PC2", "PC3"; - allwinner,function = "spi0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; }; spi1_pins: spi1 { - allwinner,pins = "PA15", "PA16", "PA14", "PA13"; - allwinner,function = "spi1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA15", "PA16", "PA14", "PA13"; + function = "spi1"; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PA4", "PA5"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA4", "PA5"; + function = "uart0"; }; uart1_pins: uart1 { - allwinner,pins = "PG6", "PG7"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG6", "PG7"; + function = "uart1"; }; uart1_rts_cts_pins: uart1_rts_cts { - allwinner,pins = "PG8", "PG9"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG8", "PG9"; + function = "uart1"; }; uart2_pins: uart2 { - allwinner,pins = "PA0", "PA1"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA0", "PA1"; + function = "uart2"; }; uart3_pins: uart3 { - allwinner,pins = "PA13", "PA14"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PA13", "PA14"; + function = "uart3"; }; }; @@ -478,6 +462,19 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; }; + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_BUS_SPDIF>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>; + dma-names = "tx"; + status = "disabled"; + }; + pwm: pwm@01c21400 { compatible = "allwinner,sun8i-h3-pwm"; reg = <0x01c21400 0x8>; @@ -486,6 +483,20 @@ status = "disabled"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -580,7 +591,7 @@ gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -601,6 +612,11 @@ #reset-cells = <1>; }; + codec_analog: codec-analog@01f015c0 { + compatible = "allwinner,sun8i-h3-codec-analog"; + reg = <0x01f015c0 0x4>; + }; + ir: ir@01f02000 { compatible = "allwinner,sun5i-a13-ir"; clocks = <&apb0_gates 1>, <&ir_clk>; @@ -624,10 +640,8 @@ #interrupt-cells = <3>; ir_pins_a: ir@0 { - allwinner,pins = "PL11"; - allwinner,function = "s_cir_rx"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL11"; + function = "s_cir_rx"; }; }; }; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 29f837a47771..c676940a96da 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -83,15 +83,14 @@ }; &mmc1_pins_a { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &r_pio { wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 { - allwinner,pins = "PL6", "PL7", "PL11"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PL6", "PL7", "PL11"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts index 47553e522982..472c03b7aeab 100644 --- a/arch/arm/boot/dts/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -84,6 +84,14 @@ }; +&codec { + status = "okay"; +}; + +&dai { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -149,8 +157,8 @@ }; &mmc2_8bit_pins { - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + drive-strength = <40>; + bias-pull-up; }; &ohci0 { @@ -159,40 +167,32 @@ &pio { mmc0_cd_pin_parrot: mmc0_cd_pin@0 { - allwinner,pins = "PD14"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PD14"; + function = "gpio_in"; + bias-pull-up; }; led_pins_parrot: led_pins@0 { - allwinner,pins = "PE16", "PE17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PE16", "PE17"; + function = "gpio_out"; }; usb0_id_det: usb0_id_detect_pin@0 { - allwinner,pins = "PD10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PD10"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_parrot: usb1_vbus_pin@0 { - allwinner,pins = "PD12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PD12"; + function = "gpio_out"; }; }; &r_pio { wifi_reset_pin_parrot: wifi_reset_pin@0 { - allwinner,pins = "PL6"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL6"; + function = "gpio_out"; }; }; @@ -209,7 +209,7 @@ }; }; -#include "axp22x.dtsi" +#include "axp223.dtsi" ®_aldo1 { regulator-always-on; @@ -325,6 +325,10 @@ status = "okay"; }; +&sound { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_b>; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 69bc0cd26ca7..7097c18ff487 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -94,31 +94,25 @@ &pio { bl_en_pin: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH6"; + function = "gpio_in"; }; mmc0_cd_pin: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PB4"; + function = "gpio_in"; + bias-pull-up; }; ts_power_pin: ts_power_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH1"; + function = "gpio_out"; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH8"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -136,7 +130,7 @@ }; }; -#include "axp22x.dtsi" +#include "axp223.dtsi" ®_aldo1 { regulator-always-on; @@ -220,6 +214,10 @@ regulator-name = "vcc-rtc"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &r_uart { pinctrl-names = "default"; pinctrl-0 = <&r_uart_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts new file mode 100644 index 000000000000..387fc2aa546d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-v3s.dtsi" +#include "sunxi-common-regulators.dtsi" + +/ { + model = "Lichee Pi Zero"; + compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + blue_led { + label = "licheepi:blue:usr"; + gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ + }; + + green_led { + label = "licheepi:green:usr"; + gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ + default-state = "on"; + }; + + red_led { + label = "licheepi:red:usr"; + gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */ + }; + }; +}; + +&mmc0 { + pinctrl-0 = <&mmc0_pins_a>; + pinctrl-names = "default"; + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi new file mode 100644 index 000000000000..71075969e5e6 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -0,0 +1,309 @@ +/* + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clocks = <&ccu 14>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu 22>, + <&ccu 45>, + <&ccu 47>, + <&ccu 46>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu 7>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu 23>, + <&ccu 48>, + <&ccu 50>, + <&ccu 49>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu 8>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ccu 24>, + <&ccu 51>, + <&ccu 53>, + <&ccu 52>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu 9>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb_otg: usb@01c19000 { + compatible = "allwinner,sun8i-h3-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ccu 29>; + resets = <&ccu 17>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-v3s-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>; + reg-names = "phy_ctrl", + "pmu0"; + clocks = <&ccu 56>; + clock-names = "usb0_phy"; + resets = <&ccu 0>; + reset-names = "usb0_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ccu: clock@01c20000 { + compatible = "allwinner,sun8i-v3s-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + rtc: rtc@01c20400 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01c20400 0x54>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-v3s-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + i2c0_pins: i2c0 { + pins = "PB6", "PB7"; + function = "i2c0"; + }; + + uart0_pins_a: uart0@0 { + pins = "PB8", "PB9"; + function = "uart0"; + }; + + mmc0_pins_a: mmc0@0 { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 40>; + resets = <&ccu 49>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 41>; + resets = <&ccu 50>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 42>; + resets = <&ccu 51>; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 38>; + resets = <&ccu 46>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 39>; + resets = <&ccu 47>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 67b02fe7f11c..9112a200fd5e 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -108,7 +108,7 @@ }; &mmc1_pins { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc2 { @@ -123,7 +123,7 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; }; &osc32k { @@ -133,17 +133,14 @@ &pio { led_pins_cubieboard4: led-pins@0 { - allwinner,pins = "PH6", "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH6", "PH17"; + function = "gpio_out"; }; mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH18"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -153,10 +150,8 @@ &r_pio { wifi_en_pin_cubieboard4: wifi_en_pin@0 { - allwinner,pins = "PL2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL2"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 7e036b2be762..0fc3a87f5576 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -150,7 +150,7 @@ }; &mmc1_pins { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc2 { @@ -165,7 +165,7 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; }; &ohci0 { @@ -183,31 +183,24 @@ &pio { led_pins_optimus: led-pins@0 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH0", "PH1"; + function = "gpio_out"; }; mmc0_cd_pin_optimus: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PH18"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_optimus: usb1_vbus_pin@1 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH4"; + function = "gpio_out"; }; usb3_vbus_pin_optimus: usb3_vbus_pin@1 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH5"; + function = "gpio_out"; }; }; @@ -217,17 +210,13 @@ &r_pio { led_r_pins_optimus: led-pins@1 { - allwinner,pins = "PM15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PM15"; + function = "gpio_out"; }; wifi_en_pin_optimus: wifi_en_pin@0 { - allwinner,pins = "PL2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL2"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 979ad1aacfb1..03f2ab47ece0 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -613,7 +613,7 @@ gic: interrupt-controller@01c41000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c41000 0x1000>, - <0x01c42000 0x1000>, + <0x01c42000 0x2000>, <0x01c44000 0x2000>, <0x01c46000 0x2000>; interrupt-controller; @@ -687,50 +687,44 @@ #gpio-cells = <3>; i2c3_pins_a: i2c3@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "i2c3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG10", "PG11"; + function = "i2c3"; }; mmc0_pins: mmc0 { - allwinner,pins = "PF0", "PF1" ,"PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PF0", "PF1" ,"PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc1_pins: mmc1 { - allwinner,pins = "PG0", "PG1" ,"PG2", "PG3", + pins = "PG0", "PG1" ,"PG2", "PG3", "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_pins: mmc2_8bit { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", - "PC13", "PC14", "PC15", - "PC16"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; uart0_pins_a: uart0@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH12", "PH13"; + function = "uart0"; }; uart4_pins_a: uart4@0 { - allwinner,pins = "PG12", "PG13", "PG14", "PG15"; - allwinner,function = "uart4"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PG12", "PG13", "PG14", "PG15"; + function = "uart4"; }; }; @@ -912,17 +906,15 @@ #gpio-cells = <3>; r_ir_pins: r_ir { - allwinner,pins = "PL6"; - allwinner,function = "s_cir_rx"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PL6"; + function = "s_cir_rx"; }; r_rsb_pins: r_rsb { - allwinner,pins = "PN0", "PN1"; - allwinner,function = "s_rsb"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + pins = "PN0", "PN1"; + function = "s_rsb"; + drive-strength = <20>; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index f1953b0c5059..17c09fed9e84 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -47,31 +47,23 @@ &pio { ahci_pwr_pin_a: ahci_pwr_pin@0 { - allwinner,pins = "PB8"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB8"; + function = "gpio_out"; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PB9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PB9"; + function = "gpio_out"; }; usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH6"; + function = "gpio_out"; }; usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + pins = "PH3"; + function = "gpio_out"; }; }; diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi index dd7eb5f624d9..0c8cad4d6ee6 100644 --- a/arch/arm/boot/dts/tango4-common.dtsi +++ b/arch/arm/boot/dts/tango4-common.dtsi @@ -97,6 +97,52 @@ clocks = <&xtal>; }; + mmc0: mmc@21000 { + compatible = "arasan,sdhci-8.9a"; + reg = <0x21000 0x200>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>; + interrupts = <60 IRQ_TYPE_LEVEL_HIGH>; + }; + + mmc1: mmc@21200 { + compatible = "arasan,sdhci-8.9a"; + reg = <0x21200 0x200>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + }; + + usb0: usb@21400 { + compatible = "chipidea,usb2"; + reg = <0x21400 0x200>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb0_phy>; + phy-names = "usb-phy"; + }; + + usb0_phy: phy@21700 { + compatible = "sigma,smp8642-usb-phy"; + reg = <0x21700 0x100>; + #phy-cells = <0>; + clocks = <&clkgen USB_CLK>; + }; + + usb1: usb@25400 { + compatible = "chipidea,usb2"; + reg = <0x25400 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb1_phy>; + phy-names = "usb-phy"; + }; + + usb1_phy: phy@25700 { + compatible = "sigma,smp8642-usb-phy"; + reg = <0x25700 0x100>; + #phy-cells = <0>; + clocks = <&clkgen USB_CLK>; + }; + eth0: ethernet@26000 { compatible = "sigma,smp8734-ethernet"; reg = <0x26000 0x800>; diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts index 4cab64cb581e..86d8df98802f 100644 --- a/arch/arm/boot/dts/tango4-vantage-1172.dts +++ b/arch/arm/boot/dts/tango4-vantage-1172.dts @@ -8,6 +8,7 @@ aliases { serial = &uart; + eth0 = ð0; }; memory@80000000 { @@ -34,3 +35,7 @@ reg = <4>; }; }; + +&mmc1 { + non-removable; /* eMMC */ +}; diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts index 653044a44f0d..5b860ad5cbee 100644 --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -187,14 +187,8 @@ /* Apalis SD1 */ sdhci@700b0400 { status = "okay"; - /* - * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it - * features some magic properties even though the external - * loopback is disabled and the internal loopback used as per - * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being - * set to 0xfffd according to the TRM! - * cd-gpios = <&gpio TEGRA_GPIO(EE, 4) GPIO_ACTIVE_LOW>; - */ + /* SD1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; bus-width = <4>; vqmmc-supply = <&vddio_sdmmc3>; }; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 0819721dda59..f9e623bdd5c3 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -44,7 +44,7 @@ /* * Toradex Apalis TK1 Module Device Tree - * Compatible for Revisions 2GB: V1.0A + * Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A */ / { model = "Toradex Apalis TK1"; @@ -257,7 +257,7 @@ }; dp_hpd_pff0 { nvidia,pins = "dp_hpd_pff0"; - nvidia,function = "rsvd2"; + nvidia,function = "dp"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -416,18 +416,10 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - /* - * Don't use MMC1_D6 aka SDMMC3_CLK_LB_IN for now as it - * features some magic properties even though the - * external loopback is disabled and the internal - * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 - * register's SDMMC_SPARE1 bits being set to 0xfffd - * according to the TRM! - */ sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */ nvidia,pins = "sdmmc3_clk_lb_in_pee5"; - nvidia,function = "sdmmc3"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; @@ -522,20 +514,12 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - /* - * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it - * features some magic properties even though the - * external loopback is disabled and the internal - * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 - * register's SDMMC_SPARE1 bits being set to 0xfffd - * according to the TRM! - */ - sdmmc3_clk_lb_out_pee4 { /* CD# GPIO */ - nvidia,pins = "sdmmc3_clk_lb_out_pee4"; - nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + sdmmc3_cd_n_pv2 { /* CD# GPIO */ + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; /* Apalis SPDIF */ @@ -1153,11 +1137,11 @@ nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - /* GPIO_PI6 aka TEMP_ALERT_L */ + /* GPIO_PI6 aka TMP451 ALERT#/THERM2# */ pi6 { nvidia,pins = "pi6"; nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; @@ -1514,13 +1498,6 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - sdmmc3_cd_n_pv2 { /* NC */ - nvidia,pins = "sdmmc3_cd_n_pv2"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - }; gpio_x1_aud_px1 { /* NC */ nvidia,pins = "gpio_x1_aud_px1"; nvidia,function = "rsvd2"; @@ -1570,6 +1547,22 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; + /* + * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output + * driver enabled aka not tristated and input driver + * enabled as well as it features some magic properties + * even though the external loopback is disabled and the + * internal loopback used as per + * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 + * bits being set to 0xfffd according to the TRM! + */ + sdmmc3_clk_lb_out_pee4 { /* NC */ + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; }; }; diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index 67d7cfb32541..12eb7809d9ab 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -6,7 +6,11 @@ / { model = "Acer Chromebook 13 CB5-311"; - compatible = "google,nyan-big", "nvidia,tegra124"; + compatible = "google,nyan-big-rev7", "google,nyan-big-rev6", + "google,nyan-big-rev5", "google,nyan-big-rev4", + "google,nyan-big-rev3", "google,nyan-big-rev2", + "google,nyan-big-rev1", "google,nyan-big-rev0", + "google,nyan-big", "google,nyan", "nvidia,tegra124"; panel: panel { compatible = "auo,b133xtn01"; @@ -1098,19 +1102,19 @@ }; cam_i2c_scl_pbb1 { nvidia,pins = "cam_i2c_scl_pbb1"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; cam_i2c_sda_pbb2 { nvidia,pins = "cam_i2c_sda_pbb2"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; pbb3 { nvidia,pins = "pbb3"; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts index c9582361c26e..1078a73d5092 100644 --- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts +++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts @@ -6,7 +6,13 @@ / { model = "HP Chromebook 14"; - compatible = "google,nyan-blaze", "google,nyan", "nvidia,tegra124"; + compatible = "google,nyan-blaze-rev10", "google,nyan-blaze-rev9", + "google,nyan-blaze-rev8", "google,nyan-blaze-rev7", + "google,nyan-blaze-rev6", "google,nyan-blaze-rev5", + "google,nyan-blaze-rev4", "google,nyan-blaze-rev3", + "google,nyan-blaze-rev2", "google,nyan-blaze-rev1", + "google,nyan-blaze-rev0", "google,nyan-blaze", + "google,nyan", "nvidia,tegra124"; panel: panel { compatible = "samsung,ltn140at29-301"; @@ -1094,19 +1100,19 @@ }; cam_i2c_scl_pbb1 { nvidia,pins = "cam_i2c_scl_pbb1"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; cam_i2c_sda_pbb2 { nvidia,pins = "cam_i2c_sda_pbb2"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; pbb3 { nvidia,pins = "pbb3"; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index eabfa655a3cd..5cf987b5401e 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -65,7 +65,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>; }; temperature-sensor@4c { @@ -331,10 +331,11 @@ reg = <0x9>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(J, 0) - GPIO_ACTIVE_HIGH>; + IRQ_TYPE_EDGE_BOTH>; ti,ac-detect-gpios = <&gpio TEGRA_GPIO(J, 0) GPIO_ACTIVE_HIGH>; + ti,external-control; }; battery: sbs-battery@b { diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 4e361a8c167e..b4bfa5586c23 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -569,6 +569,7 @@ regulator-name = "+3VS,vdd_pnl"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>; enable-active-high; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 381747f114a9..87b07fbadbbe 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -366,6 +366,7 @@ sdhci@c8000000 { status = "okay"; + broken-cd; bus-width = <4>; }; diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index 10a711041b4a..8ee79da9af7c 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -1,7 +1,8 @@ /* * Device Tree Source for UniPhier SoCs default pinctrl settings * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2017 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,6 +44,11 @@ */ &pinctrl { + pinctrl_emmc: emmc_grp { + groups = "emmc"; + function = "emmc"; + }; + pinctrl_i2c0: i2c0_grp { groups = "i2c0"; function = "i2c0"; @@ -78,6 +84,16 @@ function = "nand"; }; + pinctrl_sd: sd_grp { + groups = "sd"; + function = "sd"; + }; + + pinctrl_sd1: sd1_grp { + groups = "sd1"; + function = "sd1"; + }; + pinctrl_system_bus: system_bus_grp { groups = "system_bus", "system_bus_cs1"; function = "system_bus"; diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 1e0b823f7e8f..091b738041a0 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 21bfef957b68..b6a1eeeb2bb4 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts index b3aeab58f718..076998968fb5 100644 --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 1a8a0efa19a6..515c4d2f28b0 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index d7fdb2a7d97b..3d9896171bfc 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts index dbca4f86fdbb..ef9b4d6209f6 100644 --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 9ec9e337f5a8..395812c52933 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index cdc100732514..53e3b8b250c6 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 958b4c42d320..7940408838df 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -13,17 +13,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,43 +32,23 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "vf610.dtsi" +#include "vf610-zii-dev.dtsi" / { model = "ZII VF610 Development Board, Rev B"; compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610"; - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - reg = <0x80000000 0x20000000>; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pinctrl_leds_debug>; - pinctrl-names = "default"; - - debug { - label = "zii:green:debug1"; - gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - mdio-mux { compatible = "mdio-mux-gpio"; pinctrl-0 = <&pinctrl_mdio_mux>; @@ -86,7 +66,7 @@ #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: switch@0 { compatible = "marvell,mv88e6085"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -102,6 +82,7 @@ ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; label = "lan0"; @@ -136,6 +117,7 @@ reg = <6>; label = "cpu"; ethernet = <&fec1>; + fixed-link { speed = <100>; full-duplex; @@ -169,7 +151,7 @@ #address-cells = <1>; #size-cells = <0>; - switch1: switch1@0 { + switch1: switch@0 { compatible = "marvell,mv88e6085"; pinctrl-0 = <&pinctrl_gpio_switch1>; pinctrl-names = "default"; @@ -185,6 +167,7 @@ ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; label = "lan3"; @@ -208,6 +191,7 @@ label = "dsa"; link = <&switch2port9>; phy-mode = "rgmii-txid"; + fixed-link { speed = <1000>; full-duplex; @@ -228,16 +212,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; + switch1phy0: switch1phy0@0 { reg = <0>; interrupt-parent = <&switch1>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; + switch1phy1: switch1phy0@1 { reg = <1>; interrupt-parent = <&switch1>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; + switch1phy2: switch1phy0@2 { reg = <2>; interrupt-parent = <&switch1>; @@ -262,6 +249,7 @@ ports { #address-cells = <1>; #size-cells = <0>; + port@0 { reg = <0>; label = "lan6"; @@ -280,6 +268,7 @@ port@3 { reg = <3>; label = "optical3"; + fixed-link { speed = <1000>; full-duplex; @@ -291,6 +280,7 @@ port@4 { reg = <4>; label = "optical4"; + fixed-link { speed = <1000>; full-duplex; @@ -305,6 +295,7 @@ phy-mode = "rgmii-txid"; link = <&switch1port5 &switch0port5>; + fixed-link { speed = <1000>; full-duplex; @@ -321,25 +312,6 @@ }; }; - reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { - compatible = "regulator-fixed"; - regulator-name = "vcc_3v3_mcu"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - usb0_vbus: regulator-usb0-vbus { - compatible = "regulator-fixed"; - pinctrl-0 = <&pinctrl_usb_vbus>; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 6 0>; - }; - spi0 { compatible = "spi-gpio"; pinctrl-0 = <&pinctrl_gpio_spi0>; @@ -376,49 +348,6 @@ }; }; -&adc0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc0_ad5>; - vref-supply = <®_vcc_3v3_mcu>; - status = "okay"; -}; - -&edma0 { - status = "okay"; -}; - -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - bus-width = <4>; - status = "okay"; -}; - -&fec0 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec0>; - status = "okay"; -}; - -&fec1 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - status = "okay"; - - fixed-link { - speed = <100>; - full-duplex; - }; - - mdio1: mdio { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - }; -}; - &i2c0 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -443,33 +372,6 @@ interrupt-parent = <&gpio2>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; }; - - lm75@48 { - compatible = "national,lm75"; - reg = <0x48>; - }; - - at24c04@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - }; - - at24c04@52 { - compatible = "atmel,24c04"; - reg = <0x52>; - }; - - ds1682@6b { - compatible = "dallas,ds1682"; - reg = <0x6b>; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; }; &i2c2 { @@ -539,120 +441,8 @@ }; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbdev0 { - disable-over-current; - vbus-supply = <&usb0_vbus>; - dr_mode = "host"; - status = "okay"; -}; - -&usbh1 { - disable-over-current; - status = "okay"; -}; - -&usbmisc0 { - status = "okay"; -}; - -&usbmisc1 { - status = "okay"; -}; - -&usbphy0 { - status = "okay"; -}; - -&usbphy1 { - status = "okay"; -}; &iomuxc { - pinctrl_adc0_ad5: adc0ad5grp { - fsl,pins = < - VF610_PAD_PTC30__ADC0_SE5 0x00a1 - >; - }; - - pinctrl_dspi0: dspi0grp { - fsl,pins = < - VF610_PAD_PTB18__DSPI0_CS1 0x1182 - VF610_PAD_PTB19__DSPI0_CS0 0x1182 - VF610_PAD_PTB20__DSPI0_SIN 0x1181 - VF610_PAD_PTB21__DSPI0_SOUT 0x1182 - VF610_PAD_PTB22__DSPI0_SCK 0x1182 - >; - }; - - pinctrl_dspi2: dspi2grp { - fsl,pins = < - VF610_PAD_PTD31__DSPI2_CS1 0x1182 - VF610_PAD_PTD30__DSPI2_CS0 0x1182 - VF610_PAD_PTD29__DSPI2_SIN 0x1181 - VF610_PAD_PTD28__DSPI2_SOUT 0x1182 - VF610_PAD_PTD27__DSPI2_SCK 0x1182 - >; - }; - - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - VF610_PAD_PTA24__ESDHC1_CLK 0x31ef - VF610_PAD_PTA25__ESDHC1_CMD 0x31ef - VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef - VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef - VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef - VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef - VF610_PAD_PTA7__GPIO_134 0x219d - >; - }; - - pinctrl_fec0: fec0grp { - fsl,pins = < - VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2 - VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3 - VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 - VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 - VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 - VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 - VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 - VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 - VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 - >; - }; - - pinctrl_fec1: fec1grp { - fsl,pins = < - VF610_PAD_PTA6__RMII_CLKIN 0x30d1 - VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 - VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 - VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 - VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 - VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 - VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 - VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 - VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 - >; - }; - pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 { fsl,pins = < VF610_PAD_PTE27__GPIO_132 0x33e2 @@ -681,39 +471,6 @@ >; }; - pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { - fsl,pins = < - VF610_PAD_PTE14__GPIO_119 0x31c2 - >; - }; - - pinctrl_i2c0: i2c0grp { - fsl,pins = < - VF610_PAD_PTB14__I2C0_SCL 0x37ff - VF610_PAD_PTB15__I2C0_SDA 0x37ff - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - VF610_PAD_PTB16__I2C1_SCL 0x37ff - VF610_PAD_PTB17__I2C1_SDA 0x37ff - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - VF610_PAD_PTA22__I2C2_SCL 0x37ff - VF610_PAD_PTA23__I2C2_SDA 0x37ff - >; - }; - - pinctrl_leds_debug: pinctrl-leds-debug { - fsl,pins = < - VF610_PAD_PTD20__GPIO_74 0x31c2 - >; - }; - pinctrl_mdio_mux: pinctrl-mdio-mux { fsl,pins = < VF610_PAD_PTA18__GPIO_8 0x31c2 @@ -728,57 +485,4 @@ VF610_PAD_PTB28__GPIO_98 0x219d >; }; - - pinctrl_pwm0: pwm0grp { - fsl,pins = < - VF610_PAD_PTB0__FTM0_CH0 0x1582 - VF610_PAD_PTB1__FTM0_CH1 0x1582 - VF610_PAD_PTB2__FTM0_CH2 0x1582 - VF610_PAD_PTB3__FTM0_CH3 0x1582 - >; - }; - - pinctrl_qspi0: qspi0grp { - fsl,pins = < - VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 - VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff - VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 - VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 - VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 - VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 - >; - }; - - pinctrl_uart0: uart0grp { - fsl,pins = < - VF610_PAD_PTB10__UART0_TX 0x21a2 - VF610_PAD_PTB11__UART0_RX 0x21a1 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - VF610_PAD_PTB23__UART1_TX 0x21a2 - VF610_PAD_PTB24__UART1_RX 0x21a1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 - >; - }; - - pinctrl_usb_vbus: pinctrl-usb-vbus { - fsl,pins = < - VF610_PAD_PTA16__GPIO_6 0x31c2 - >; - }; - - pinctrl_usb0_host: usb0-host-grp { - fsl,pins = < - VF610_PAD_PTD6__GPIO_85 0x0062 - >; - }; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts new file mode 100644 index 000000000000..6a45bd24ffe6 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -0,0 +1,416 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "vf610-zii-dev.dtsi" + +/ { + model = "ZII VF610 Development Board, Rev C"; + compatible = "zii,vf610dev-c", "zii,vf610dev", "fsl,vf610"; + + mdio-mux { + compatible = "mdio-mux-gpio"; + pinctrl-0 = <&pinctrl_mdio_mux>; + pinctrl-names = "default"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH + &gpio0 9 GPIO_ACTIVE_HIGH + &gpio0 25 GPIO_ACTIVE_HIGH>; + mdio-parent-bus = <&mdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio_mux_1: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + switch0: switch@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + switch0port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch1port10>; + }; + }; + }; + }; + + mdio_mux_2: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + switch1: switch@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 1>; + eeprom-length = <512>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan5"; + }; + + port@2 { + reg = <2>; + label = "lan6"; + }; + + port@3 { + reg = <3>; + label = "lan7"; + }; + + port@4 { + reg = <4>; + label = "lan8"; + }; + + + switch1port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch0port10>; + }; + }; + }; + }; + + mdio_mux_4: mdio@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&dspi0 { + bus-num = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi0>; + status = "okay"; + spi-num-chipselects = <2>; + + m25p128@0 { + compatible = "m25p128", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <1000000>; + }; + + atzb-rf-233@1 { + compatible = "atmel,at86rf233"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctr_atzb_rf_233>; + + spi-max-frequency = <7500000>; + reg = <1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio3>; + xtal-trim = /bits/ 8 <0x06>; + + sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>; + + fsl,spi-cs-sck-delay = <180>; + fsl,spi-sck-cs-delay = <250>; + }; +}; + +&i2c0 { + /* + * U712 + * + * Exposed signals: + * P1 - WE2_CMD + * P2 - WE2_CLK + */ + gpio5: pca9557@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* + * U121 + * + * Exposed signals: + * I/O0 - ENET_SWR_EN + * I/O1 - ESW1_RESETn + * I/O2 - ARINC_RESET + * I/O3 - DD1_IO_RESET + * I/O4 - ESW2_RESETn + * I/O5 - ESW3_RESETn + * I/O6 - ESW4_RESETn + * I/O8 - TP909 + * I/O9 - FEM_SEL + * I/O10 - WIFI_RESETn + * I/O11 - PHY_RSTn + * I/O12 - OPT1_SD + * I/O13 - OPT2_SD + * I/O14 - OPT1_TX_DIS + * I/O15 - OPT2_TX_DIS + */ + gpio6: sx1503@20 { + compatible = "semtech,sx1503q"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sx1503_20>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + interrupt-controller; + + enet_swr_en { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "enet-swr-en"; + }; + }; + + /* + * U715 + * + * Exposed signals: + * IO0 - WE1_CLK + * IO1 - WE1_CMD + */ + gpio7: pca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + + }; +}; + +&i2c1 { + at24mac602@00 { + compatible = "atmel,24c02"; + reg = <0x50>; + read-only; + }; +}; + +&i2c2 { + tca9548@70 { + compatible = "nxp,pca9548"; + pinctrl-0 = <&pinctrl_i2c_mux_reset>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + sfp2: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + sfp3: at24c04@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&gpio0 { + eth0_intrp { + gpio-hog; + gpios = <23 GPIO_ACTIVE_HIGH>; + input; + line-name = "sx1503-irq"; + }; +}; + +&gpio3 { + eth0_intrp { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + input; + line-name = "eth0-intrp"; + }; +}; + +&fec0 { + mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0_phy_int>; + + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + }; + }; +}; + +&iomuxc { + pinctr_atzb_rf_233: pinctrl-atzb-rf-233 { + fsl,pins = < + VF610_PAD_PTB2__GPIO_24 0x31c2 + VF610_PAD_PTE27__GPIO_132 0x33e2 + >; + }; + + + pinctrl_sx1503_20: pinctrl-sx1503-20 { + fsl,pins = < + VF610_PAD_PTB1__GPIO_23 0x219d + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA20__UART3_TX 0x21a2 + VF610_PAD_PTA21__UART3_RX 0x21a1 + >; + }; + + pinctrl_mdio_mux: pinctrl-mdio-mux { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x31c2 + VF610_PAD_PTA19__GPIO_9 0x31c2 + VF610_PAD_PTB3__GPIO_25 0x31c2 + >; + }; + + pinctrl_fec0_phy_int: pinctrl-fec0-phy-int { + fsl,pins = < + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi new file mode 100644 index 000000000000..ca9e1bc35e45 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -0,0 +1,383 @@ +/* + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "vf610.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + debug { + label = "zii:green:debug1"; + gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_usb_vbus>; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 6 0>; + }; +}; + +&adc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_ad5>; + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; + + ds1682@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbdev0 { + disable-over-current; + vbus-supply = <&usb0_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbmisc0 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_adc0_ad5: adc0ad5grp { + fsl,pins = < + VF610_PAD_PTC30__ADC0_SE5 0x00a1 + >; + }; + + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB18__DSPI0_CS1 0x1182 + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + + pinctrl_dspi2: dspi2grp { + fsl,pins = < + VF610_PAD_PTD31__DSPI2_CS1 0x1182 + VF610_PAD_PTD30__DSPI2_CS0 0x1182 + VF610_PAD_PTD29__DSPI2_SIN 0x1181 + VF610_PAD_PTD28__DSPI2_SOUT 0x1182 + VF610_PAD_PTD27__DSPI2_SCK 0x1182 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; + + pinctrl_fec0: fec0grp { + fsl,pins = < + VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2 + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3 + VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_spi0: pinctrl-gpio-spi0 { + fsl,pins = < + VF610_PAD_PTB22__GPIO_44 0x33e2 + VF610_PAD_PTB21__GPIO_43 0x33e2 + VF610_PAD_PTB20__GPIO_42 0x33e1 + VF610_PAD_PTB19__GPIO_41 0x33e2 + VF610_PAD_PTB18__GPIO_40 0x33e2 + >; + }; + + pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { + fsl,pins = < + VF610_PAD_PTE14__GPIO_119 0x31c2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c0_gpio: i2c0grp-gpio { + fsl,pins = < + VF610_PAD_PTB14__GPIO_36 0x31c2 + VF610_PAD_PTB15__GPIO_37 0x31c2 + >; + }; + + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + VF610_PAD_PTA22__I2C2_SCL 0x37ff + VF610_PAD_PTA23__I2C2_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD20__GPIO_74 0x31c2 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 + VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff + VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + >; + }; + + pinctrl_usb_vbus: pinctrl-usb-vbus { + fsl,pins = < + VF610_PAD_PTA16__GPIO_6 0x31c2 + >; + }; + + pinctrl_usb0_host: usb0-host-grp { + fsl,pins = < + VF610_PAD_PTD6__GPIO_85 0x0062 + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 0cfc060f94d7..80fef182c672 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts index 2931a80caccb..7198e8cceb0d 100644 --- a/arch/arm/boot/dts/vf610m4-colibri.dts +++ b/arch/arm/boot/dts/vf610m4-colibri.dts @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610m4-cosmic.dts b/arch/arm/boot/dts/vf610m4-cosmic.dts index 8944a2d2054c..f7474c11aabd 100644 --- a/arch/arm/boot/dts/vf610m4-cosmic.dts +++ b/arch/arm/boot/dts/vf610m4-cosmic.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi index 9f2c731839f2..1474bd34d0f1 100644 --- a/arch/arm/boot/dts/vf610m4.dtsi +++ b/arch/arm/boot/dts/vf610m4.dtsi @@ -13,17 +13,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -32,11 +32,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index e9d28474c26a..5d654b5b4ce6 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -10,17 +10,17 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -29,11 +29,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. |