diff options
Diffstat (limited to 'arch/arm64')
29 files changed, 272 insertions, 160 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts index be81330db14f..02641191682e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts @@ -32,14 +32,14 @@ }; }; - reg_vcc3v3: vcc3v3 { + reg_vcc3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - reg_vdd_cpu_gpu: vdd-cpu-gpu { + reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu { compatible = "regulator-fixed"; regulator-name = "vdd-cpu-gpu"; regulator-min-microvolt = <1135000>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 7599e1a00ff5..48952a556648 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -102,7 +102,7 @@ #address-cells = <0>; interrupt-controller; reg = <0x11001000 0x1000>, - <0x11002000 0x1000>, + <0x11002000 0x2000>, <0x11004000 0x2000>, <0x11006000 0x2000>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts index db3d303093f6..6d22efbd645c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts @@ -83,15 +83,9 @@ }; eeprom@52 { - compatible = "atmel,24c512"; + compatible = "onnn,cat24c04", "atmel,24c04"; reg = <0x52>; }; - - eeprom@53 { - compatible = "atmel,24c512"; - reg = <0x53>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index d53ccc56bb63..07139e35686d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -58,14 +58,9 @@ }; eeprom@52 { - compatible = "atmel,24c512"; + compatible = "onnn,cat24c05", "atmel,24c04"; reg = <0x52>; }; - - eeprom@53 { - compatible = "atmel,24c512"; - reg = <0x53>; - }; }; &i2c3 { diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index bbd34ae12a53..2e437f20da39 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -134,6 +134,23 @@ pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; status = "okay"; reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + /* + * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property + * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and + * 2 size cells and also expects that the second range starts at 16 MB offset. If these + * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address + * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window + * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB. + * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in + * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix): + * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7 + * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf + * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33 + */ + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0xe8000000 0 0xe8000000 0 0x01000000 /* Port 0 IO */ + 0x82000000 0 0xe9000000 0 0xe9000000 0 0x07000000>; /* Port 0 MEM */ /* enabled by U-Boot if PCIe module is present */ status = "disabled"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 83d2d83f7692..2a2015a15362 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -487,8 +487,15 @@ #interrupt-cells = <1>; msi-parent = <&pcie0>; msi-controller; - ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */ - 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/ + /* + * The 128 MiB address range [0xe8000000-0xf0000000] is + * dedicated for PCIe and can be assigned to 8 windows + * with size a power of two. Use one 64 KiB window for + * IO at the end and the remaining seven windows + * (totaling 127 MiB) for MEM. + */ + ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */ + 0x81000000 0 0xefff0000 0 0xefff0000 0 0x00010000>; /* Port 0 IO */ interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, <0 0 0 2 &pcie_intc 1>, diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index e40281510c0c..b14e9f3bfdbd 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -1215,13 +1215,13 @@ cpu@0 { device_type = "cpu"; - compatible = "nvidia,denver"; + compatible = "nvidia,tegra132-denver"; reg = <0>; }; cpu@1 { device_type = "cpu"; - compatible = "nvidia,denver"; + compatible = "nvidia,tegra132-denver"; reg = <1>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 6946fb210e48..9b5007e5f790 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1976,7 +1976,7 @@ }; pcie_ep@14160000 { - compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; + compatible = "nvidia,tegra194-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ @@ -2008,7 +2008,7 @@ }; pcie_ep@14180000 { - compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; + compatible = "nvidia,tegra194-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ @@ -2040,7 +2040,7 @@ }; pcie_ep@141a0000 { - compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; + compatible = "nvidia,tegra194-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index cdc1e3d60c58..3ceb36cac512 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -151,7 +151,7 @@ #size-cells = <2>; ranges; - rpm_msg_ram: memory@0x60000 { + rpm_msg_ram: memory@60000 { reg = <0x0 0x60000 0x0 0x6000>; no-map; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index e8c37a1693d3..cc08dc4eb56a 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -20,7 +20,7 @@ stdout-path = "serial0"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x0 0x40000000 0x0 0x20000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 829e37ac82f6..776a6b0f61a6 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -567,10 +567,10 @@ pcie1: pci@10000000 { compatible = "qcom,pcie-ipq8074"; - reg = <0x10000000 0xf1d - 0x10000f20 0xa8 - 0x00088000 0x2000 - 0x10100000 0x1000>; + reg = <0x10000000 0xf1d>, + <0x10000f20 0xa8>, + <0x00088000 0x2000>, + <0x10100000 0x1000>; reg-names = "dbi", "elbi", "parf", "config"; device_type = "pci"; linux,pci-domain = <1>; @@ -629,10 +629,10 @@ pcie0: pci@20000000 { compatible = "qcom,pcie-ipq8074"; - reg = <0x20000000 0xf1d - 0x20000f20 0xa8 - 0x00080000 0x2000 - 0x20100000 0x1000>; + reg = <0x20000000 0xf1d>, + <0x20000f20 0xa8>, + <0x00080000 0x2000>, + <0x20100000 0x1000>; reg-names = "dbi", "elbi", "parf", "config"; device_type = "pci"; linux,pci-domain = <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 5969b5cfdc85..cb82864a90ef 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* Copyright (c) 2015, LGE Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com> */ /dts-v1/; @@ -15,6 +16,9 @@ qcom,board-id = <0xb64 0>; qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; + /* Bullhead firmware doesn't support PSCI */ + /delete-node/ psci; + aliases { serial0 = &blsp1_uart2; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts index baa55643b40f..ffe1a9bd8f70 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts @@ -32,3 +32,7 @@ }; }; }; + +&tlmm { + gpio-reserved-ranges = <85 4>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 6707f898607f..45f9a44326a6 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -14,16 +14,18 @@ chosen { }; clocks { - xo_board: xo_board { + xo_board: xo-board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; + clock-output-names = "xo_board"; }; - sleep_clk: sleep_clk { + sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; + clock-output-names = "sleep_clk"; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index fd6ae5464dea..eef17434d12a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -17,14 +17,14 @@ chosen { }; clocks { - xo_board: xo_board { + xo_board: xo-board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; clock-output-names = "xo_board"; }; - sleep_clk: sleep_clk { + sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32764>; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index deb928d303c2..f87054575ce7 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -17,14 +17,14 @@ chosen { }; clocks { - xo_board: xo_board { + xo_board: xo-board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; clock-output-names = "xo_board"; }; - sleep_clk: sleep_clk { + sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32764>; @@ -343,10 +343,19 @@ }; qhee_code: qhee-code@85800000 { - reg = <0x0 0x85800000 0x0 0x3700000>; + reg = <0x0 0x85800000 0x0 0x600000>; no-map; }; + rmtfs_mem: memory@85e00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x85e00000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + smem_region: smem-mem@86000000 { reg = <0 0x86000000 0 0x200000>; no-map; @@ -357,58 +366,44 @@ no-map; }; - modem_fw_mem: modem-fw-region@8ac00000 { + mpss_region: mpss@8ac00000 { reg = <0x0 0x8ac00000 0x0 0x7e00000>; no-map; }; - adsp_fw_mem: adsp-fw-region@92a00000 { + adsp_region: adsp@92a00000 { reg = <0x0 0x92a00000 0x0 0x1e00000>; no-map; }; - pil_mba_mem: pil-mba-region@94800000 { + mba_region: mba@94800000 { reg = <0x0 0x94800000 0x0 0x200000>; no-map; }; - buffer_mem: buffer-region@94a00000 { + buffer_mem: tzbuffer@94a00000 { reg = <0x0 0x94a00000 0x0 0x100000>; no-map; }; - venus_fw_mem: venus-fw-region@9f800000 { + venus_region: venus@9f800000 { reg = <0x0 0x9f800000 0x0 0x800000>; no-map; }; - secure_region2: secure-region2@f7c00000 { - reg = <0x0 0xf7c00000 0x0 0x5c00000>; - no-map; - }; - adsp_mem: adsp-region@f6000000 { reg = <0x0 0xf6000000 0x0 0x800000>; no-map; }; - qseecom_ta_mem: qseecom-ta-region@fec00000 { - reg = <0x0 0xfec00000 0x0 0x1000000>; - no-map; - }; - qseecom_mem: qseecom-region@f6800000 { reg = <0x0 0xf6800000 0x0 0x1400000>; no-map; }; - secure_display_memory: secure-region@f5c00000 { - reg = <0x0 0xf5c00000 0x0 0x5c00000>; - no-map; - }; - - cont_splash_mem: cont-splash-region@9d400000 { - reg = <0x0 0x9d400000 0x0 0x23ff000>; + zap_shader_region: gpu@fed00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xfed00000 0x0 0xa00000>; no-map; }; }; @@ -527,14 +522,18 @@ reg = <0x01f40000 0x20000>; }; - tlmm: pinctrl@3000000 { + tlmm: pinctrl@3100000 { compatible = "qcom,sdm630-pinctrl"; - reg = <0x03000000 0xc00000>; + reg = <0x03100000 0x400000>, + <0x03500000 0x400000>, + <0x03900000 0x400000>; + reg-names = "south", "center", "north"; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - #gpio-cells = <0x2>; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <0x2>; + #interrupt-cells = <2>; blsp1_uart1_default: blsp1-uart1-default { pins = "gpio0", "gpio1", "gpio2", "gpio3"; @@ -554,40 +553,48 @@ bias-disable; }; - blsp2_uart1_tx_active: blsp2-uart1-tx-active { - pins = "gpio16"; - drive-strength = <2>; - bias-disable; - }; - - blsp2_uart1_tx_sleep: blsp2-uart1-tx-sleep { - pins = "gpio16"; - drive-strength = <2>; - bias-pull-up; - }; + blsp2_uart1_default: blsp2-uart1-active { + tx-rts { + pins = "gpio16", "gpio19"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-disable; + }; - blsp2_uart1_rxcts_active: blsp2-uart1-rxcts-active { - pins = "gpio17", "gpio18"; - drive-strength = <2>; - bias-disable; - }; + rx { + /* + * Avoid garbage data while BT module + * is powered off or not driving signal + */ + pins = "gpio17"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-up; + }; - blsp2_uart1_rxcts_sleep: blsp2-uart1-rxcts-sleep { - pins = "gpio17", "gpio18"; - drive-strength = <2>; - bias-no-pull; + cts { + /* Match the pull of the BT module */ + pins = "gpio18"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-down; + }; }; - blsp2_uart1_rfr_active: blsp2-uart1-rfr-active { - pins = "gpio19"; - drive-strength = <2>; - bias-disable; - }; + blsp2_uart1_sleep: blsp2-uart1-sleep { + tx { + pins = "gpio16"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; - blsp2_uart1_rfr_sleep: blsp2-uart1-rfr-sleep { - pins = "gpio19"; - drive-strength = <2>; - bias-no-pull; + rx-cts-rts { + pins = "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-no-pull; + }; }; i2c1_default: i2c1-default { @@ -686,50 +693,106 @@ bias-pull-up; }; - sdc1_clk_on: sdc1-clk-on { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <16>; - }; + sdc1_state_on: sdc1-on { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; - sdc1_clk_off: sdc1-clk-off { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; - }; + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; - sdc1_cmd_on: sdc1-cmd-on { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <10>; - }; + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; - sdc1_cmd_off: sdc1-cmd-off { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; }; - sdc1_data_on: sdc1-data-on { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <8>; - }; + sdc1_state_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; - sdc1_data_off: sdc1-data-off { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; }; - sdc1_rclk_on: sdc1-rclk-on { - pins = "sdc1_rclk"; - bias-pull-down; + sdc2_state_on: sdc2-on { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; }; - sdc1_rclk_off: sdc1-rclk-off { - pins = "sdc1_rclk"; - bias-pull-down; + sdc2_state_off: sdc2-off { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; }; }; @@ -821,8 +884,8 @@ clock-names = "core", "iface", "xo"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; bus-width = <8>; non-removable; @@ -967,10 +1030,8 @@ dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart1_tx_active &blsp2_uart1_rxcts_active - &blsp2_uart1_rfr_active>; - pinctrl-1 = <&blsp2_uart1_tx_sleep &blsp2_uart1_rxcts_sleep - &blsp2_uart1_rfr_sleep>; + pinctrl-0 = <&blsp2_uart1_default>; + pinctrl-1 = <&blsp2_uart1_sleep>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 888dc23a530e..ad6561843ba2 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -564,7 +564,7 @@ left_spkr: wsa8810-left{ compatible = "sdw10217211000"; reg = <0 3>; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; @@ -572,7 +572,7 @@ right_spkr: wsa8810-right{ compatible = "sdw10217211000"; - powerdown-gpios = <&wcdgpio 3 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; reg = <0 4>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight"; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index d4547a192748..ec356fe07ac8 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2346,7 +2346,7 @@ }; }; - epss_l3: interconnect@18591000 { + epss_l3: interconnect@18590000 { compatible = "qcom,sm8250-epss-l3"; reg = <0 0x18590000 0 0x1000>; diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi index e3773b05c403..3c73dfc430af 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi @@ -55,7 +55,8 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; - phy-mode = "rgmii-id"; + rx-internal-delay-ps = <1800>; + tx-internal-delay-ps = <2000>; status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index b9e46aed5336..dde3a07bc417 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -19,7 +19,8 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <1800>; status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index c58a0846db50..a5ebe574fbac 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -1131,6 +1131,8 @@ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 9ebf6e58ba31..20003a41a706 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -1004,6 +1004,8 @@ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index f27d9b2eb996..e0e54342cd4c 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -960,6 +960,7 @@ power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 708258696b4f..2e6c12a46daf 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -1233,6 +1233,8 @@ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 8f471881b7a3..2e4bb7ecd5bd 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -277,10 +277,6 @@ interrupt-parent = <&gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; - /* Depends on LVDS */ - max-clock = <135000000>; - min-vrefresh = <50>; - adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h index 587c504a4c8b..4b06cf9a8c8a 100644 --- a/arch/arm64/include/asm/kernel-pgtable.h +++ b/arch/arm64/include/asm/kernel-pgtable.h @@ -65,8 +65,8 @@ #define EARLY_KASLR (0) #endif -#define EARLY_ENTRIES(vstart, vend, shift) (((vend) >> (shift)) \ - - ((vstart) >> (shift)) + 1 + EARLY_KASLR) +#define EARLY_ENTRIES(vstart, vend, shift) \ + ((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1 + EARLY_KASLR) #define EARLY_PGDS(vstart, vend) (EARLY_ENTRIES(vstart, vend, PGDIR_SHIFT)) diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h index b2e91c187e2a..c7315862e243 100644 --- a/arch/arm64/include/asm/mmu.h +++ b/arch/arm64/include/asm/mmu.h @@ -30,11 +30,32 @@ typedef struct { } mm_context_t; /* - * This macro is only used by the TLBI and low-level switch_mm() code, - * neither of which can race with an ASID change. We therefore don't - * need to reload the counter using atomic64_read(). + * We use atomic64_read() here because the ASID for an 'mm_struct' can + * be reallocated when scheduling one of its threads following a + * rollover event (see new_context() and flush_context()). In this case, + * a concurrent TLBI (e.g. via try_to_unmap_one() and ptep_clear_flush()) + * may use a stale ASID. This is fine in principle as the new ASID is + * guaranteed to be clean in the TLB, but the TLBI routines have to take + * care to handle the following race: + * + * CPU 0 CPU 1 CPU 2 + * + * // ptep_clear_flush(mm) + * xchg_relaxed(pte, 0) + * DSB ISHST + * old = ASID(mm) + * | <rollover> + * | new = new_context(mm) + * \-----------------> atomic_set(mm->context.id, new) + * cpu_switch_mm(mm) + * // Hardware walk of pte using new ASID + * TLBI(old) + * + * In this scenario, the barrier on CPU 0 and the dependency on CPU 1 + * ensure that the page-table walker on CPU 1 *must* see the invalid PTE + * written by CPU 0. */ -#define ASID(mm) ((mm)->context.id.counter & 0xffff) +#define ASID(mm) (atomic64_read(&(mm)->context.id) & 0xffff) static inline bool arm64_kernel_unmapped_at_el0(void) { diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index cc3f5a33ff9c..36f02892e1df 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -245,9 +245,10 @@ static inline void flush_tlb_all(void) static inline void flush_tlb_mm(struct mm_struct *mm) { - unsigned long asid = __TLBI_VADDR(0, ASID(mm)); + unsigned long asid; dsb(ishst); + asid = __TLBI_VADDR(0, ASID(mm)); __tlbi(aside1is, asid); __tlbi_user(aside1is, asid); dsb(ish); @@ -256,9 +257,10 @@ static inline void flush_tlb_mm(struct mm_struct *mm) static inline void flush_tlb_page_nosync(struct vm_area_struct *vma, unsigned long uaddr) { - unsigned long addr = __TLBI_VADDR(uaddr, ASID(vma->vm_mm)); + unsigned long addr; dsb(ishst); + addr = __TLBI_VADDR(uaddr, ASID(vma->vm_mm)); __tlbi(vale1is, addr); __tlbi_user(vale1is, addr); } @@ -283,9 +285,7 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, { int num = 0; int scale = 0; - unsigned long asid = ASID(vma->vm_mm); - unsigned long addr; - unsigned long pages; + unsigned long asid, addr, pages; start = round_down(start, stride); end = round_up(end, stride); @@ -305,6 +305,7 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, } dsb(ishst); + asid = ASID(vma->vm_mm); /* * When the CPU does not support TLB range operations, flush the TLB diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 78cdd6b24172..f9119eea735e 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -191,7 +191,7 @@ SYM_CODE_END(preserve_boot_args) * to be composed of multiple pages. (This effectively scales the end index). * * vstart: virtual address of start of range - * vend: virtual address of end of range + * vend: virtual address of end of range - we map [vstart, vend] * shift: shift used to transform virtual address into index * ptrs: number of entries in page table * istart: index in table corresponding to vstart @@ -228,17 +228,18 @@ SYM_CODE_END(preserve_boot_args) * * tbl: location of page table * rtbl: address to be used for first level page table entry (typically tbl + PAGE_SIZE) - * vstart: start address to map - * vend: end address to map - we map [vstart, vend] + * vstart: virtual address of start of range + * vend: virtual address of end of range - we map [vstart, vend - 1] * flags: flags to use to map last level entries * phys: physical address corresponding to vstart - physical memory is contiguous * pgds: the number of pgd entries * * Temporaries: istart, iend, tmp, count, sv - these need to be different registers - * Preserves: vstart, vend, flags - * Corrupts: tbl, rtbl, istart, iend, tmp, count, sv + * Preserves: vstart, flags + * Corrupts: tbl, rtbl, vend, istart, iend, tmp, count, sv */ .macro map_memory, tbl, rtbl, vstart, vend, flags, phys, pgds, istart, iend, tmp, count, sv + sub \vend, \vend, #1 add \rtbl, \tbl, #PAGE_SIZE mov \sv, \rtbl mov \count, #0 |