diff options
Diffstat (limited to 'arch/arm/mach-u300/include')
| -rw-r--r-- | arch/arm/mach-u300/include/mach/syscon.h | 120 |
1 files changed, 113 insertions, 7 deletions
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h index 1c90d1b1ccb6..7444f5c7da97 100644 --- a/arch/arm/mach-u300/include/mach/syscon.h +++ b/arch/arm/mach-u300/include/mach/syscon.h @@ -240,8 +240,13 @@ #define U300_SYSCON_PMC1LR_CDI_MASK (0xC000) #define U300_SYSCON_PMC1LR_CDI_CDI (0x0000) #define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000) +#ifdef CONFIG_MACH_U300_BS335 +#define U300_SYSCON_PMC1LR_CDI_CDI2 (0x8000) +#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO (0xC000) +#elif CONFIG_MACH_U300_BS365 #define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000) #define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000) +#endif #define U300_SYSCON_PMC1LR_PDI_MASK (0x3000) #define U300_SYSCON_PMC1LR_PDI_PDI (0x0000) #define U300_SYSCON_PMC1LR_PDI_EGG (0x1000) @@ -345,19 +350,69 @@ #define U300_SYSCON_MMCR_MASK (0x0003) #define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002) #define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001) - +/* Pull up/down control (R/W) */ +#define U300_SYSCON_PUCR (0x104) +#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE (0x0200) +#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE (0x0100) +#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080) +#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040) +#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F) +/* Padmux 2 control */ +#define U300_SYSCON_PMC2R (0x100) +#define U300_SYSCON_PMC2R_APP_MISC_0_MASK (0x00C0) +#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO (0x0000) +#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM (0x0040) +#define U300_SYSCON_PMC2R_APP_MISC_0_MMC (0x0080) +#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 (0x00C0) +#define U300_SYSCON_PMC2R_APP_MISC_1_MASK (0x0300) +#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO (0x0000) +#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM (0x0100) +#define U300_SYSCON_PMC2R_APP_MISC_1_MMC (0x0200) +#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 (0x0300) +#define U300_SYSCON_PMC2R_APP_MISC_2_MASK (0x0C00) +#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO (0x0000) +#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM (0x0400) +#define U300_SYSCON_PMC2R_APP_MISC_2_MMC (0x0800) +#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 (0x0C00) +#define U300_SYSCON_PMC2R_APP_MISC_3_MASK (0x3000) +#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO (0x0000) +#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM (0x1000) +#define U300_SYSCON_PMC2R_APP_MISC_3_MMC (0x2000) +#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 (0x3000) +#define U300_SYSCON_PMC2R_APP_MISC_4_MASK (0xC000) +#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO (0x0000) +#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM (0x4000) +#define U300_SYSCON_PMC2R_APP_MISC_4_MMC (0x8000) +#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO (0xC000) /* TODO: More SYSCON registers missing */ #define U300_SYSCON_PMC3R (0x10c) #define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000) #define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000) #define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000) #define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000) -/* TODO: Missing other configs, I just added the SPI stuff */ - +/* TODO: Missing other configs */ +#define U300_SYSCON_PMC4R (0x168) +#define U300_SYSCON_PMC4R_APP_MISC_12_MASK (0x0003) +#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO (0x0000) +#define U300_SYSCON_PMC4R_APP_MISC_13_MASK (0x000C) +#define U300_SYSCON_PMC4R_APP_MISC_13_CDI (0x0000) +#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA (0x0004) +#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 (0x0008) +#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO (0x000C) +#define U300_SYSCON_PMC4R_APP_MISC_14_MASK (0x0030) +#define U300_SYSCON_PMC4R_APP_MISC_14_CDI (0x0000) +#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA (0x0010) +#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 (0x0020) +#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO (0x0030) +#define U300_SYSCON_PMC4R_APP_MISC_16_MASK (0x0300) +#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 (0x0000) +#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS (0x0100) +#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N (0x0200) /* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ #define U300_SYSCON_S0CCR (0x120) #define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) #define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000) #define U300_SYSCON_S0CCR_CLOCK_INV (0x0200) #define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0) #define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E) @@ -375,6 +430,7 @@ #define U300_SYSCON_S1CCR (0x124) #define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF) #define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000) #define U300_SYSCON_S1CCR_CLOCK_INV (0x0200) #define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0) #define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E) @@ -393,6 +449,7 @@ #define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF) #define U300_SYSCON_S2CCR_CLK_STEAL (0x8000) #define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000) #define U300_SYSCON_S2CCR_CLOCK_INV (0x0200) #define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0) #define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E) @@ -425,6 +482,44 @@ #define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C) #define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002) #define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001) +/* SC_PLL_IRQ_CONTROL 16bit (R/W) */ +#define U300_SYSCON_PICR (0x0130) +#define U300_SYSCON_PICR_MASK (0x00FF) +#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080) +#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040) +#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020) +#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010) +#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008) +#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004) +#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002) +#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001) +/* SC_PLL_IRQ_STATUS 16 bit (R/-) */ +#define U300_SYSCON_PISR (0x0134) +#define U300_SYSCON_PISR_MASK (0x000F) +#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008) +#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004) +#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002) +#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001) +/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */ +#define U300_SYSCON_PICLR (0x0138) +#define U300_SYSCON_PICLR_MASK (0x000F) +#define U300_SYSCON_PICLR_RWMASK (0x0000) +#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008) +#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004) +#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002) +#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001) +/* CAMIF_CONTROL 16 bit (-/W) */ +#define U300_SYSCON_CICR (0x013C) +#define U300_SYSCON_CICR_MASK (0x0FFF) +#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK (0x0F00) +#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1 (0x0C00) +#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0 (0x0300) +#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK (0x00F0) +#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1 (0x00C0) +#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0 (0x0030) +#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK (0x000F) +#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1 (0x000C) +#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0 (0x0003) /* Clock activity observability register 0 */ #define U300_SYSCON_C0OAR (0x140) #define U300_SYSCON_C0OAR_MASK (0xFFFF) @@ -513,7 +608,7 @@ /** * CPU medium frequency in MHz */ -#define SYSCON_CPU_CLOCK_MEDIUM 104 +#define SYSCON_CPU_CLOCK_MEDIUM 52 /** * CPU low frequency in MHz */ @@ -527,7 +622,7 @@ /** * EMIF medium frequency in MHz */ -#define SYSCON_EMIF_CLOCK_MEDIUM 104 +#define SYSCON_EMIF_CLOCK_MEDIUM 52 /** * EMIF low frequency in MHz */ @@ -541,7 +636,7 @@ /** * AHB medium frequency in MHz */ -#define SYSCON_AHB_CLOCK_MEDIUM 52 +#define SYSCON_AHB_CLOCK_MEDIUM 26 /** * AHB low frequency in MHz */ @@ -553,6 +648,15 @@ enum syscon_busmaster { SYSCON_BM_VIDEO_ENC }; +/* Selectr a resistor or a set of resistors */ +enum syscon_pull_up_down { + SYSCON_PU_KEY_IN_EN, + SYSCON_PU_EMIF_1_8_BIT_EN, + SYSCON_PU_EMIF_1_16_BIT_EN, + SYSCON_PU_EMIF_1_NFIF_READY_EN, + SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN, +}; + /* * Note that this array must match the order of the array "clk_reg" * in syscon.c @@ -575,6 +679,7 @@ enum syscon_clk { SYSCON_CLKCONTROL_SPI, SYSCON_CLKCONTROL_I2S0_CORE, SYSCON_CLKCONTROL_I2S1_CORE, + SYSCON_CLKCONTROL_UART1, SYSCON_CLKCONTROL_AAIF, SYSCON_CLKCONTROL_AHB, SYSCON_CLKCONTROL_APEX, @@ -604,7 +709,8 @@ enum syscon_sysclk_mode { enum syscon_sysclk_req { SYSCON_SYSCLKREQ_DISABLED, - SYSCON_SYSCLKREQ_ACTIVE_LOW + SYSCON_SYSCLKREQ_ACTIVE_LOW, + SYSCON_SYSCLKREQ_MONITOR }; enum syscon_clk_mode { |