diff options
Diffstat (limited to 'arch/arm/mach-sa1100/collie.c')
| -rw-r--r-- | arch/arm/mach-sa1100/collie.c | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c new file mode 100644 index 000000000000..99287890d396 --- /dev/null +++ b/arch/arm/mach-sa1100/collie.c @@ -0,0 +1,192 @@ +/* + * linux/arch/arm/mach-sa1100/collie.c + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains all Collie-specific tweaks. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * ChangeLog: + * 03-06-2004 John Lenz <jelenz@wisc.edu> + * 06-04-2002 Chris Larson <kergoth@digitalnemesis.net> + * 04-16-2001 Lineo Japan,Inc. ... + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/timer.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/arch/collie.h> + +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> +#include <asm/mach/serial_sa1100.h> + +#include <asm/hardware/scoop.h> +#include <asm/mach/sharpsl_param.h> +#include <asm/hardware/locomo.h> + +#include "generic.h" + +static struct resource collie_scoop_resources[] = { + [0] = { + .start = 0x40800000, + .end = 0x40800fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config collie_scoop_setup = { + .io_dir = COLLIE_SCOOP_IO_DIR, + .io_out = COLLIE_SCOOP_IO_OUT, +}; + +struct platform_device colliescoop_device = { + .name = "sharp-scoop", + .id = -1, + .dev = { + .platform_data = &collie_scoop_setup, + }, + .num_resources = ARRAY_SIZE(collie_scoop_resources), + .resource = collie_scoop_resources, +}; + + +static struct resource locomo_resources[] = { + [0] = { + .start = 0x40000000, + .end = 0x40001fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_GPIO25, + .end = IRQ_GPIO25, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device locomo_device = { + .name = "locomo", + .id = 0, + .num_resources = ARRAY_SIZE(locomo_resources), + .resource = locomo_resources, +}; + +static struct platform_device *devices[] __initdata = { + &locomo_device, + &colliescoop_device, +}; + +static struct mtd_partition collie_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 0x000C0000, + .mask_flags = MTD_WRITEABLE + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 0x00100000, + }, { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = 0x00e20000, + } +}; + +static void collie_set_vpp(int vpp) +{ + write_scoop_reg(SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN); + if (vpp) { + write_scoop_reg(SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN); + } else { + write_scoop_reg(SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN); + } +} + +static struct flash_platform_data collie_flash_data = { + .map_name = "cfi_probe", + .set_vpp = collie_set_vpp, + .parts = collie_partitions, + .nr_parts = ARRAY_SIZE(collie_partitions), +}; + +static struct resource collie_flash_resources[] = { + { + .start = SA1100_CS0_PHYS, + .end = SA1100_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, + } +}; + +static void __init collie_init(void) +{ + int ret = 0; + + /* cpu initialize */ + GAFR = ( GPIO_SSP_TXD | \ + GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \ + GPIO_32_768kHz ); + + GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \ + GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \ + GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \ + GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz ); + GPLR = GPIO_GPIO18; + + // PPC pin setting + PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \ + PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \ + PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM ); + + PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 ); + + GAFR |= GPIO_32_768kHz; + GPDR |= GPIO_32_768kHz; + TUCR = TUCR_32_768kHz; + + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + if (ret) { + printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); + } + + sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources, + ARRAY_SIZE(collie_flash_resources)); + + sharpsl_save_param(); +} + +static struct map_desc collie_io_desc[] __initdata = { + /* virtual physical length type */ + {0xe8000000, 0x00000000, 0x02000000, MT_DEVICE}, /* 32M main flash (cs0) */ + {0xea000000, 0x08000000, 0x02000000, MT_DEVICE}, /* 32M boot flash (cs1) */ +}; + +static void __init collie_map_io(void) +{ + sa1100_map_io(); + iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc)); +} + +MACHINE_START(COLLIE, "Sharp-Collie") + BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) + MAPIO(collie_map_io) + INITIRQ(sa1100_init_irq) + .timer = &sa1100_timer, + .init_machine = collie_init, +MACHINE_END |