diff options
Diffstat (limited to 'arch/arm/mach-omap2/omap_hwmod.c')
-rw-r--r-- | arch/arm/mach-omap2/omap_hwmod.c | 248 |
1 files changed, 193 insertions, 55 deletions
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e282e35769fd..e39772beaedd 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1,7 +1,7 @@ /* * omap_hwmod implementation for OMAP2/3/4 * - * Copyright (C) 2009-2010 Nokia Corporation + * Copyright (C) 2009-2011 Nokia Corporation * * Paul Walmsley, BenoƮt Cousson, Kevin Hilman * @@ -162,9 +162,6 @@ static LIST_HEAD(omap_hwmod_list); /* mpu_oh: used to add/remove MPU initiator from sleepdep list */ static struct omap_hwmod *mpu_oh; -/* inited: 0 if omap_hwmod_init() has not yet been called; 1 otherwise */ -static u8 inited; - /* Private functions */ @@ -460,14 +457,18 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) * will be accessed by a particular initiator (e.g., if a module will * be accessed by the IVA, there should be a sleepdep between the IVA * initiator and the module). Only applies to modules in smart-idle - * mode. Returns -EINVAL upon error or passes along - * clkdm_add_sleepdep() value upon success. + * mode. If the clockdomain is marked as not needing autodeps, return + * 0 without doing anything. Otherwise, returns -EINVAL upon error or + * passes along clkdm_add_sleepdep() value upon success. */ static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh) { if (!oh->_clk) return -EINVAL; + if (oh->_clk->clkdm && oh->_clk->clkdm->flags & CLKDM_NO_AUTODEPS) + return 0; + return clkdm_add_sleepdep(oh->_clk->clkdm, init_oh->_clk->clkdm); } @@ -480,14 +481,18 @@ static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh) * be accessed by a particular initiator (e.g., if a module will not * be accessed by the IVA, there should be no sleepdep between the IVA * initiator and the module). Only applies to modules in smart-idle - * mode. Returns -EINVAL upon error or passes along - * clkdm_del_sleepdep() value upon success. + * mode. If the clockdomain is marked as not needing autodeps, return + * 0 without doing anything. Returns -EINVAL upon error or passes + * along clkdm_del_sleepdep() value upon success. */ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh) { if (!oh->_clk) return -EINVAL; + if (oh->_clk->clkdm && oh->_clk->clkdm->flags & CLKDM_NO_AUTODEPS) + return 0; + return clkdm_del_sleepdep(oh->_clk->clkdm, init_oh->_clk->clkdm); } @@ -904,18 +909,16 @@ static struct omap_hwmod *_lookup(const char *name) * @oh: struct omap_hwmod * * @data: not used; pass NULL * - * Called by omap_hwmod_late_init() (after omap2_clk_init()). - * Resolves all clock names embedded in the hwmod. Returns -EINVAL if - * the omap_hwmod has not yet been registered or if the clocks have - * already been initialized, 0 on success, or a non-zero error on - * failure. + * Called by omap_hwmod_setup_*() (after omap2_clk_init()). + * Resolves all clock names embedded in the hwmod. Returns 0 on + * success, or a negative error code on failure. */ static int _init_clocks(struct omap_hwmod *oh, void *data) { int ret = 0; - if (!oh || (oh->_state != _HWMOD_STATE_REGISTERED)) - return -EINVAL; + if (oh->_state != _HWMOD_STATE_REGISTERED) + return 0; pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name); @@ -1288,6 +1291,42 @@ static int _idle(struct omap_hwmod *oh) } /** + * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit + * @oh: struct omap_hwmod * + * @autoidle: desired AUTOIDLE bitfield value (0 or 1) + * + * Sets the IP block's OCP autoidle bit in hardware, and updates our + * local copy. Intended to be used by drivers that require + * direct manipulation of the AUTOIDLE bits. + * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes + * along the return value from _set_module_autoidle(). + * + * Any users of this function should be scrutinized carefully. + */ +int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle) +{ + u32 v; + int retval = 0; + unsigned long flags; + + if (!oh || oh->_state != _HWMOD_STATE_ENABLED) + return -EINVAL; + + spin_lock_irqsave(&oh->_lock, flags); + + v = oh->_sysc_cache; + + retval = _set_module_autoidle(oh, autoidle, &v); + + if (!retval) + _write_sysconfig(v, oh); + + spin_unlock_irqrestore(&oh->_lock, flags); + + return retval; +} + +/** * _shutdown - shutdown an omap_hwmod * @oh: struct omap_hwmod * * @@ -1354,14 +1393,16 @@ static int _shutdown(struct omap_hwmod *oh) * @oh: struct omap_hwmod * * * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh - * OCP_SYSCONFIG register. Returns -EINVAL if the hwmod is in the - * wrong state or returns 0. + * OCP_SYSCONFIG register. Returns 0. */ static int _setup(struct omap_hwmod *oh, void *data) { int i, r; u8 postsetup_state; + if (oh->_state != _HWMOD_STATE_CLKS_INITED) + return 0; + /* Set iclk autoidle mode */ if (oh->slaves_cnt > 0) { for (i = 0; i < oh->slaves_cnt; i++) { @@ -1455,7 +1496,7 @@ static int _setup(struct omap_hwmod *oh, void *data) */ static int __init _register(struct omap_hwmod *oh) { - int ret, ms_id; + int ms_id; if (!oh || !oh->name || !oh->class || !oh->class->name || (oh->_state != _HWMOD_STATE_UNKNOWN)) @@ -1467,12 +1508,10 @@ static int __init _register(struct omap_hwmod *oh) return -EEXIST; ms_id = _find_mpu_port_index(oh); - if (!IS_ERR_VALUE(ms_id)) { + if (!IS_ERR_VALUE(ms_id)) oh->_mpu_port_index = ms_id; - oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index); - } else { + else oh->_int_flags |= _HWMOD_NO_MPU_PORT; - } list_add_tail(&oh->node, &omap_hwmod_list); @@ -1480,9 +1519,14 @@ static int __init _register(struct omap_hwmod *oh) oh->_state = _HWMOD_STATE_REGISTERED; - ret = 0; + /* + * XXX Rather than doing a strcmp(), this should test a flag + * set in the hwmod data, inserted by the autogenerator code. + */ + if (!strcmp(oh->name, MPU_INITIATOR_NAME)) + mpu_oh = oh; - return ret; + return 0; } @@ -1585,65 +1629,132 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), return ret; } - /** - * omap_hwmod_init - init omap_hwmod code and register hwmods + * omap_hwmod_register - register an array of hwmods * @ohs: pointer to an array of omap_hwmods to register * * Intended to be called early in boot before the clock framework is * initialized. If @ohs is not null, will register all omap_hwmods - * listed in @ohs that are valid for this chip. Returns -EINVAL if - * omap_hwmod_init() has already been called or 0 otherwise. + * listed in @ohs that are valid for this chip. Returns 0. + */ +int __init omap_hwmod_register(struct omap_hwmod **ohs) +{ + int r, i; + + if (!ohs) + return 0; + + i = 0; + do { + if (!omap_chip_is(ohs[i]->omap_chip)) + continue; + + r = _register(ohs[i]); + WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name, + r); + } while (ohs[++i]); + + return 0; +} + +/* + * _populate_mpu_rt_base - populate the virtual address for a hwmod + * + * Must be called only from omap_hwmod_setup_*() so ioremap works properly. + * Assumes the caller takes care of locking if needed. */ -int __init omap_hwmod_init(struct omap_hwmod **ohs) +static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data) +{ + if (oh->_state != _HWMOD_STATE_REGISTERED) + return 0; + + if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + return 0; + + oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index); + if (!oh->_mpu_rt_va) + pr_warning("omap_hwmod: %s found no _mpu_rt_va for %s\n", + __func__, oh->name); + + return 0; +} + +/** + * omap_hwmod_setup_one - set up a single hwmod + * @oh_name: const char * name of the already-registered hwmod to set up + * + * Must be called after omap2_clk_init(). Resolves the struct clk + * names to struct clk pointers for each registered omap_hwmod. Also + * calls _setup() on each hwmod. Returns -EINVAL upon error or 0 upon + * success. + */ +int __init omap_hwmod_setup_one(const char *oh_name) { struct omap_hwmod *oh; int r; - if (inited) + pr_debug("omap_hwmod: %s: %s\n", oh_name, __func__); + + if (!mpu_oh) { + pr_err("omap_hwmod: %s: cannot setup_one: MPU initiator hwmod %s not yet registered\n", + oh_name, MPU_INITIATOR_NAME); return -EINVAL; + } - inited = 1; + oh = _lookup(oh_name); + if (!oh) { + WARN(1, "omap_hwmod: %s: hwmod not yet registered\n", oh_name); + return -EINVAL; + } - if (!ohs) - return 0; + if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh) + omap_hwmod_setup_one(MPU_INITIATOR_NAME); - oh = *ohs; - while (oh) { - if (omap_chip_is(oh->omap_chip)) { - r = _register(oh); - WARN(r, "omap_hwmod: %s: _register returned " - "%d\n", oh->name, r); - } - oh = *++ohs; + r = _populate_mpu_rt_base(oh, NULL); + if (IS_ERR_VALUE(r)) { + WARN(1, "omap_hwmod: %s: couldn't set mpu_rt_base\n", oh_name); + return -EINVAL; + } + + r = _init_clocks(oh, NULL); + if (IS_ERR_VALUE(r)) { + WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh_name); + return -EINVAL; } + _setup(oh, NULL); + return 0; } /** - * omap_hwmod_late_init - do some post-clock framework initialization + * omap_hwmod_setup - do some post-clock framework initialization * * Must be called after omap2_clk_init(). Resolves the struct clk names * to struct clk pointers for each registered omap_hwmod. Also calls - * _setup() on each hwmod. Returns 0. + * _setup() on each hwmod. Returns 0 upon success. */ -int omap_hwmod_late_init(void) +static int __init omap_hwmod_setup_all(void) { int r; - /* XXX check return value */ - r = omap_hwmod_for_each(_init_clocks, NULL); - WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n"); + if (!mpu_oh) { + pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n", + __func__, MPU_INITIATOR_NAME); + return -EINVAL; + } + + r = omap_hwmod_for_each(_populate_mpu_rt_base, NULL); - mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME); - WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n", - MPU_INITIATOR_NAME); + r = omap_hwmod_for_each(_init_clocks, NULL); + WARN(IS_ERR_VALUE(r), + "omap_hwmod: %s: _init_clocks failed\n", __func__); omap_hwmod_for_each(_setup, NULL); return 0; } +core_initcall(omap_hwmod_setup_all); /** * omap_hwmod_enable - enable an omap_hwmod @@ -1862,6 +1973,7 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) os = oh->slaves[i]; for (j = 0; j < os->addr_cnt; j++) { + (res + r)->name = (os->addr + j)->name; (res + r)->start = (os->addr + j)->pa_start; (res + r)->end = (os->addr + j)->pa_end; (res + r)->flags = IORESOURCE_MEM; @@ -2162,11 +2274,11 @@ int omap_hwmod_for_each_by_class(const char *classname, * @oh: struct omap_hwmod * * @state: state that _setup() should leave the hwmod in * - * Sets the hwmod state that @oh will enter at the end of _setup() (called by - * omap_hwmod_late_init()). Only valid to call between calls to - * omap_hwmod_init() and omap_hwmod_late_init(). Returns 0 upon success or - * -EINVAL if there is a problem with the arguments or if the hwmod is - * in the wrong state. + * Sets the hwmod state that @oh will enter at the end of _setup() + * (called by omap_hwmod_setup_*()). Only valid to call between + * calling omap_hwmod_register() and omap_hwmod_setup_*(). Returns + * 0 upon success or -EINVAL if there is a problem with the arguments + * or if the hwmod is in the wrong state. */ int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state) { @@ -2218,3 +2330,29 @@ u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh) return ret; } + +/** + * omap_hwmod_no_setup_reset - prevent a hwmod from being reset upon setup + * @oh: struct omap_hwmod * + * + * Prevent the hwmod @oh from being reset during the setup process. + * Intended for use by board-*.c files on boards with devices that + * cannot tolerate being reset. Must be called before the hwmod has + * been set up. Returns 0 upon success or negative error code upon + * failure. + */ +int omap_hwmod_no_setup_reset(struct omap_hwmod *oh) +{ + if (!oh) + return -EINVAL; + + if (oh->_state != _HWMOD_STATE_REGISTERED) { + pr_err("omap_hwmod: %s: cannot prevent setup reset; in wrong state\n", + oh->name); + return -EINVAL; + } + + oh->flags |= HWMOD_INIT_NO_RESET; + + return 0; +} |