diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-cm-t35.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-cm-t35.c | 769 |
1 files changed, 0 insertions, 769 deletions
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c deleted file mode 100644 index b5dfbc1b1fc6..000000000000 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ /dev/null @@ -1,769 +0,0 @@ -/* - * CompuLab CM-T35/CM-T3730 modules support - * - * Copyright (C) 2009-2011 CompuLab, Ltd. - * Authors: Mike Rapoport <mike@compulab.co.il> - * Igor Grinberg <grinberg@compulab.co.il> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - */ - -#include <linux/clk-provider.h> -#include <linux/clkdev.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/omap-gpmc.h> -#include <linux/platform_data/gpio-omap.h> - -#include <linux/platform_data/at24.h> -#include <linux/i2c/twl.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/spi/spi.h> -#include <linux/spi/tdo24m.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/platform_data/mtd-nand-omap2.h> -#include <video/omapdss.h> -#include <video/omap-panel-data.h> -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include "common.h" -#include "mux.h" -#include "sdram-micron-mt46h32m32lf-6.h" -#include "hsmmc.h" -#include "common-board-devices.h" - -#define CM_T35_GPIO_PENDOWN 57 -#define SB_T35_USB_HUB_RESET_GPIO 167 - -#define CM_T35_SMSC911X_CS 5 -#define CM_T35_SMSC911X_GPIO 163 -#define SB_T35_SMSC911X_CS 4 -#define SB_T35_SMSC911X_GPIO 65 - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -#include <linux/smsc911x.h> -#include "gpmc-smsc911x.h" - -static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = { - .id = 0, - .cs = CM_T35_SMSC911X_CS, - .gpio_irq = CM_T35_SMSC911X_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = { - .id = 1, - .cs = SB_T35_SMSC911X_CS, - .gpio_irq = SB_T35_SMSC911X_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.1"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), -}; - -static void __init cm_t35_init_ethernet(void) -{ - regulator_register_fixed(0, cm_t35_smsc911x_supplies, - ARRAY_SIZE(cm_t35_smsc911x_supplies)); - regulator_register_fixed(1, sb_t35_smsc911x_supplies, - ARRAY_SIZE(sb_t35_smsc911x_supplies)); - - gpmc_smsc911x_init(&cm_t35_smsc911x_cfg); - gpmc_smsc911x_init(&sb_t35_smsc911x_cfg); -} -#else -static inline void __init cm_t35_init_ethernet(void) { return; } -#endif - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led cm_t35_leds[] = { - [0] = { - .gpio = 186, - .name = "cm-t35:green", - .default_trigger = "heartbeat", - .active_low = 0, - }, -}; - -static struct gpio_led_platform_data cm_t35_led_pdata = { - .num_leds = ARRAY_SIZE(cm_t35_leds), - .leds = cm_t35_leds, -}; - -static struct platform_device cm_t35_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &cm_t35_led_pdata, - }, -}; - -static void __init cm_t35_init_led(void) -{ - platform_device_register(&cm_t35_led_device); -} -#else -static inline void cm_t35_init_led(void) {} -#endif - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -static struct mtd_partition cm_t35_nand_partitions[] = { - { - .name = "xloader", - .offset = 0, /* Offset = 0x00000 */ - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "uboot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - }, - { - .name = "uboot environment", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 2 * NAND_BLOCK_SIZE, - }, - { - .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_nand_platform_data cm_t35_nand_data = { - .parts = cm_t35_nand_partitions, - .nr_parts = ARRAY_SIZE(cm_t35_nand_partitions), - .cs = 0, -}; - -static void __init cm_t35_init_nand(void) -{ - if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0) - pr_err("CM-T35: Unable to register NAND device\n"); -} -#else -static inline void cm_t35_init_nand(void) {} -#endif - -#define CM_T35_LCD_EN_GPIO 157 -#define CM_T35_LCD_BL_GPIO 58 -#define CM_T35_DVI_EN_GPIO 54 - -static const struct display_timing cm_t35_lcd_videomode = { - .pixelclock = { 0, 26000000, 0 }, - - .hactive = { 0, 480, 0 }, - .hfront_porch = { 0, 104, 0 }, - .hback_porch = { 0, 8, 0 }, - .hsync_len = { 0, 8, 0 }, - - .vactive = { 0, 640, 0 }, - .vfront_porch = { 0, 4, 0 }, - .vback_porch = { 0, 2, 0 }, - .vsync_len = { 0, 2, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE, -}; - -static struct panel_dpi_platform_data cm_t35_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 18, - - .display_timing = &cm_t35_lcd_videomode, - - .enable_gpio = -1, - .backlight_gpio = CM_T35_LCD_BL_GPIO, -}; - -static struct platform_device cm_t35_lcd_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &cm_t35_lcd_pdata, -}; - -static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = -1, -}; - -static struct platform_device cm_t35_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &cm_t35_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = CM_T35_DVI_EN_GPIO, -}; - -static struct platform_device cm_t35_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &cm_t35_tfp410_pdata, -}; - -static struct connector_atv_platform_data cm_t35_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device cm_t35_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &cm_t35_tv_pdata, -}; - -static struct omap_dss_board_info cm_t35_dss_data = { - .default_display_name = "dvi", -}; - -static struct omap2_mcspi_device_config tdo24m_mcspi_config = { - .turbo_mode = 0, -}; - -static struct tdo24m_platform_data tdo24m_config = { - .model = TDO35S, -}; - -static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { - { - .modalias = "tdo24m", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 1000000, - .controller_data = &tdo24m_mcspi_config, - .platform_data = &tdo24m_config, - }, -}; - -static void __init cm_t35_init_display(void) -{ - int err; - - spi_register_board_info(cm_t35_lcd_spi_board_info, - ARRAY_SIZE(cm_t35_lcd_spi_board_info)); - - - err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, - "lcd bl enable"); - if (err) { - pr_err("CM-T35: failed to request LCD EN GPIO\n"); - return; - } - - msleep(50); - gpio_set_value(CM_T35_LCD_EN_GPIO, 1); - - err = omap_display_init(&cm_t35_dss_data); - if (err) { - pr_err("CM-T35: failed to register DSS device\n"); - gpio_free(CM_T35_LCD_EN_GPIO); - } - - platform_device_register(&cm_t35_tfp410_device); - platform_device_register(&cm_t35_dvi_connector_device); - platform_device_register(&cm_t35_lcd_device); - platform_device_register(&cm_t35_tv_connector_device); -} - -static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply cm_t35_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply cm_t35_vio_supplies[] = { - REGULATOR_SUPPLY("vcc", "spi1.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data cm_t35_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply), - .consumer_supplies = cm_t35_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data cm_t35_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply), - .consumer_supplies = cm_t35_vsim_supply, -}; - -static struct regulator_init_data cm_t35_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, - .num_consumer_supplies = ARRAY_SIZE(cm_t35_vio_supplies), - .consumer_supplies = cm_t35_vio_supplies, -}; - -static uint32_t cm_t35_keymap[] = { - KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT), - KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN), - KEY(2, 0, KEY_RIGHT), KEY(2, 1, KEY_C), KEY(2, 2, KEY_D), -}; - -static struct matrix_keymap_data cm_t35_keymap_data = { - .keymap = cm_t35_keymap, - .keymap_size = ARRAY_SIZE(cm_t35_keymap), -}; - -static struct twl4030_keypad_data cm_t35_kp_data = { - .keymap_data = &cm_t35_keymap_data, - .rows = 3, - .cols = 3, - .rep = 1, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .deferred = true, - }, - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .transceiver = 1, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .ocr_mask = 0x00100000, /* 3.3V */ - }, - {} /* Terminator */ -}; - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = OMAP_MAX_GPIO_LINES + 6, - .vcc_gpio = -EINVAL, - }, - { - .port = 2, - .reset_gpio = OMAP_MAX_GPIO_LINES + 7, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static void __init cm_t35_init_usbh(void) -{ - int err; - - err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO, - GPIOF_OUT_INIT_LOW, "usb hub rst"); - if (err) { - pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err); - } else { - udelay(10); - gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1); - msleep(1); - } - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); -} - -static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, - unsigned ngpio) -{ - int wlan_rst = gpio + 2; - - if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) { - gpio_export(wlan_rst, 0); - udelay(10); - gpio_set_value_cansleep(wlan_rst, 0); - udelay(10); - gpio_set_value_cansleep(wlan_rst, 1); - } else { - pr_err("CM-T35: could not obtain gpio for WiFi reset\n"); - } - - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - return 0; -} - -static struct twl4030_gpio_platform_data cm_t35_gpio_data = { - .setup = cm_t35_twl_gpio_setup, -}; - -static struct twl4030_power_data cm_t35_power_data = { - .use_poweroff = true, -}; - -static struct twl4030_platform_data cm_t35_twldata = { - /* platform_data for children goes here */ - .keypad = &cm_t35_kp_data, - .gpio = &cm_t35_gpio_data, - .vmmc1 = &cm_t35_vmmc1, - .vsim = &cm_t35_vsim, - .vio = &cm_t35_vio, - .power = &cm_t35_power_data, -}; - -#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE) -#include <media/omap3isp.h> -#include "devices.h" - -static struct isp_platform_subdev cm_t35_isp_subdevs[] = { - { - .board_info = &(struct i2c_board_info){ - I2C_BOARD_INFO("mt9t001", 0x5d) - }, - .i2c_adapter_id = 3, - .bus = &(struct isp_bus_cfg){ - .interface = ISP_INTERFACE_PARALLEL, - .bus = { - .parallel = { - .clk_pol = 1, - }, - }, - }, - }, - { - .board_info = &(struct i2c_board_info){ - I2C_BOARD_INFO("tvp5150", 0x5c), - }, - .i2c_adapter_id = 3, - .bus = &(struct isp_bus_cfg){ - .interface = ISP_INTERFACE_PARALLEL, - .bus = { - .parallel = { - .clk_pol = 0, - }, - }, - }, - }, - { 0 }, -}; - -static struct isp_platform_data cm_t35_isp_pdata = { - .subdevs = cm_t35_isp_subdevs, -}; - -static struct regulator_consumer_supply cm_t35_camera_supplies[] = { - REGULATOR_SUPPLY("vaa", "3-005d"), - REGULATOR_SUPPLY("vdd", "3-005d"), -}; - -static void __init cm_t35_init_camera(void) -{ - struct clk *clk; - - clk = clk_register_fixed_rate(NULL, "mt9t001-clkin", NULL, CLK_IS_ROOT, - 48000000); - clk_register_clkdev(clk, NULL, "3-005d"); - - regulator_register_fixed(2, cm_t35_camera_supplies, - ARRAY_SIZE(cm_t35_camera_supplies)); - - if (omap3_init_camera(&cm_t35_isp_pdata) < 0) - pr_warn("CM-T3x: Failed registering camera device!\n"); -} - -#else -static inline void cm_t35_init_camera(void) {} -#endif /* CONFIG_VIDEO_OMAP3 */ - -static void __init cm_t35_init_i2c(void) -{ - omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, - TWL_COMMON_REGULATOR_VDAC | - TWL_COMMON_PDATA_AUDIO); - - omap3_pmic_init("tps65930", &cm_t35_twldata); - - omap_register_i2c_bus(3, 400, NULL, 0); -} - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* nCS and IRQ for CM-T35 ethernet */ - OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), - OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - - /* nCS and IRQ for SB-T35 ethernet */ - OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0), - OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - - /* PENDOWN GPIO */ - OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - - /* mUSB */ - OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* MMC 2 */ - OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - - /* McSPI 1 */ - OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - - /* McSPI 4 */ - OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), - - /* McBSP 2 */ - OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* serial ports */ - OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* common DSS */ - OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* Camera */ - OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN), - OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN), - - /* display controls */ - OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* TPS IRQ */ - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ - OMAP_PIN_INPUT_PULLUP), - - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -static void __init cm_t3x_common_dss_mux_init(int mux_mode) -{ - omap_mux_init_signal("dss_data18", mux_mode); - omap_mux_init_signal("dss_data19", mux_mode); - omap_mux_init_signal("dss_data20", mux_mode); - omap_mux_init_signal("dss_data21", mux_mode); - omap_mux_init_signal("dss_data22", mux_mode); - omap_mux_init_signal("dss_data23", mux_mode); -} - -static void __init cm_t35_init_mux(void) -{ - int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT; - - omap_mux_init_signal("dss_data0.dss_data0", mux_mode); - omap_mux_init_signal("dss_data1.dss_data1", mux_mode); - omap_mux_init_signal("dss_data2.dss_data2", mux_mode); - omap_mux_init_signal("dss_data3.dss_data3", mux_mode); - omap_mux_init_signal("dss_data4.dss_data4", mux_mode); - omap_mux_init_signal("dss_data5.dss_data5", mux_mode); - cm_t3x_common_dss_mux_init(mux_mode); -} - -static void __init cm_t3730_init_mux(void) -{ - int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT; - - omap_mux_init_signal("sys_boot0", mux_mode); - omap_mux_init_signal("sys_boot1", mux_mode); - omap_mux_init_signal("sys_boot3", mux_mode); - omap_mux_init_signal("sys_boot4", mux_mode); - omap_mux_init_signal("sys_boot5", mux_mode); - omap_mux_init_signal("sys_boot6", mux_mode); - cm_t3x_common_dss_mux_init(mux_mode); -} -#else -static inline void cm_t35_init_mux(void) {} -static inline void cm_t3730_init_mux(void) {} -#endif - -static void __init cm_t3x_common_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - omap_hsmmc_init(mmc); - cm_t35_init_i2c(); - omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); - cm_t35_init_ethernet(); - cm_t35_init_led(); - cm_t35_init_display(); - omap_twl4030_audio_init("cm-t3x", NULL); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - cm_t35_init_usbh(); - cm_t35_init_camera(); -} - -static void __init cm_t35_init(void) -{ - cm_t3x_common_init(); - cm_t35_init_mux(); - cm_t35_init_nand(); -} - -static void __init cm_t3730_init(void) -{ - cm_t3x_common_init(); - cm_t3730_init_mux(); -} - -MACHINE_START(CM_T35, "Compulab CM-T35") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = cm_t35_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END - -MACHINE_START(CM_T3730, "Compulab CM-T3730") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3630_init_early, - .init_irq = omap3_init_irq, - .init_machine = cm_t3730_init, - .init_late = omap3630_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END |