1 files changed, 0 insertions, 240 deletions
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
deleted file mode 100644
index 29e3fe6a6669..000000000000
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Copyright 2011-2013 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/regmap.h>
-#include <linux/suspend.h>
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
-#include <asm/suspend.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "common.h"
-#include "hardware.h"
-
-#define CCR				0x0
-#define BM_CCR_WB_COUNT			(0x7 << 16)
-#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
-#define BM_CCR_RBC_EN			(0x1 << 27)
-
-#define CLPCR				0x54
-#define BP_CLPCR_LPM			0
-#define BM_CLPCR_LPM			(0x3 << 0)
-#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
-#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
-#define BM_CLPCR_SBYOS			(0x1 << 6)
-#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
-#define BM_CLPCR_VSTBY			(0x1 << 8)
-#define BP_CLPCR_STBY_COUNT		9
-#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
-#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
-#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
-#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
-#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
-#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
-#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
-#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
-#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
-#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
-#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
-#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
-
-#define CGPR				0x64
-#define BM_CGPR_CHICKEN_BIT		(0x1 << 17)
-
-static void __iomem *ccm_base;
-
-void imx6q_set_chicken_bit(void)
-{
-	u32 val = readl_relaxed(ccm_base + CGPR);
-
-	val |= BM_CGPR_CHICKEN_BIT;
-	writel_relaxed(val, ccm_base + CGPR);
-}
-
-static void imx6q_enable_rbc(bool enable)
-{
-	u32 val;
-
-	/*
-	 * need to mask all interrupts in GPC before
-	 * operating RBC configurations
-	 */
-	imx_gpc_mask_all();
-
-	/* configure RBC enable bit */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_RBC_EN;
-	val |= enable ? BM_CCR_RBC_EN : 0;
-	writel_relaxed(val, ccm_base + CCR);
-
-	/* configure RBC count */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_RBC_BYPASS_COUNT;
-	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
-	writel(val, ccm_base + CCR);
-
-	/*
-	 * need to delay at least 2 cycles of CKIL(32K)
-	 * due to hardware design requirement, which is
-	 * ~61us, here we use 65us for safe
-	 */
-	udelay(65);
-
-	/* restore GPC interrupt mask settings */
-	imx_gpc_restore_all();
-}
-
-static void imx6q_enable_wb(bool enable)
-{
-	u32 val;
-
-	/* configure well bias enable bit */
-	val = readl_relaxed(ccm_base + CLPCR);
-	val &= ~BM_CLPCR_WB_PER_AT_LPM;
-	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
-	writel_relaxed(val, ccm_base + CLPCR);
-
-	/* configure well bias count */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_WB_COUNT;
-	val |= enable ? BM_CCR_WB_COUNT : 0;
-	writel_relaxed(val, ccm_base + CCR);
-}
-
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
-{
-	struct irq_data *iomuxc_irq_data = irq_get_irq_data(32);
-	u32 val = readl_relaxed(ccm_base + CLPCR);
-
-	val &= ~BM_CLPCR_LPM;
-	switch (mode) {
-	case WAIT_CLOCKED:
-		break;
-	case WAIT_UNCLOCKED:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
-		break;
-	case STOP_POWER_ON:
-		val |= 0x2 << BP_CLPCR_LPM;
-		break;
-	case WAIT_UNCLOCKED_POWER_OFF:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val &= ~BM_CLPCR_VSTBY;
-		val &= ~BM_CLPCR_SBYOS;
-		break;
-	case STOP_POWER_OFF:
-		val |= 0x2 << BP_CLPCR_LPM;
-		val |= 0x3 << BP_CLPCR_STBY_COUNT;
-		val |= BM_CLPCR_VSTBY;
-		val |= BM_CLPCR_SBYOS;
-		if (cpu_is_imx6sl()) {
-			val |= BM_CLPCR_BYPASS_PMIC_READY;
-			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
-		} else {
-			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/*
-	 * ERR007265: CCM: When improper low-power sequence is used,
-	 * the SoC enters low power mode before the ARM core executes WFI.
-	 *
-	 * Software workaround:
-	 * 1) Software should trigger IRQ #32 (IOMUX) to be always pending
-	 *    by setting IOMUX_GPR1_GINT.
-	 * 2) Software should then unmask IRQ #32 in GPC before setting CCM
-	 *    Low-Power mode.
-	 * 3) Software should mask IRQ #32 right after CCM Low-Power mode
-	 *    is set (set bits 0-1 of CCM_CLPCR).
-	 */
-	imx_gpc_irq_unmask(iomuxc_irq_data);
-	writel_relaxed(val, ccm_base + CLPCR);
-	imx_gpc_irq_mask(iomuxc_irq_data);
-
-	return 0;
-}
-
-static int imx6q_suspend_finish(unsigned long val)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static int imx6q_pm_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_MEM:
-		imx6q_set_lpm(STOP_POWER_OFF);
-		imx6q_enable_wb(true);
-		imx6q_enable_rbc(true);
-		imx_gpc_pre_suspend();
-		imx_anatop_pre_suspend();
-		imx_set_cpu_jump(0, v7_cpu_resume);
-		/* Zzz ... */
-		cpu_suspend(0, imx6q_suspend_finish);
-		if (cpu_is_imx6q() || cpu_is_imx6dl())
-			imx_smp_prepare();
-		imx_anatop_post_resume();
-		imx_gpc_post_resume();
-		imx6q_enable_rbc(false);
-		imx6q_enable_wb(false);
-		imx6q_set_lpm(WAIT_CLOCKED);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static const struct platform_suspend_ops imx6q_pm_ops = {
-	.enter = imx6q_pm_enter,
-	.valid = suspend_valid_only_mem,
-};
-
-void __init imx6q_pm_set_ccm_base(void __iomem *base)
-{
-	ccm_base = base;
-}
-
-void __init imx6q_pm_init(void)
-{
-	struct regmap *gpr;
-
-	WARN_ON(!ccm_base);
-
-	/*
-	 * This is for SW workaround step #1 of ERR007265, see comments
-	 * in imx6q_set_lpm for details of this errata.
-	 * Force IOMUXC irq pending, so that the interrupt to GPC can be
-	 * used to deassert dsm_request signal when the signal gets
-	 * asserted unexpectedly.
-	 */
-	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
-	if (!IS_ERR(gpr))
-		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
-				   IMX6Q_GPR1_GINT);
-
-
-	suspend_set_ops(&imx6q_pm_ops);
-}