diff options
Diffstat (limited to 'arch/arm/mach-at91/include/mach')
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91_dbgu.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91_ramc.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h | 63 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 124 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91sam9_sdramc.h | 85 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91x40.h | 60 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/cpu.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/hardware.h | 10 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/uncompress.h | 7 |
9 files changed, 3 insertions, 356 deletions
diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h index 3b5948566e52..42925e8f78e4 100644 --- a/arch/arm/mach-at91/include/mach/at91_dbgu.h +++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h @@ -16,7 +16,6 @@ #ifndef AT91_DBGU_H #define AT91_DBGU_H -#if !defined(CONFIG_ARCH_AT91X40) #define AT91_DBGU_CR (0x00) /* Control Register */ #define AT91_DBGU_MR (0x04) /* Mode Register */ #define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */ @@ -34,8 +33,6 @@ #define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */ #define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */ -#endif /* AT91_DBGU */ - /* * Some AT91 parts that don't have full DEBUG units still support the ID * and extensions register. diff --git a/arch/arm/mach-at91/include/mach/at91_ramc.h b/arch/arm/mach-at91/include/mach/at91_ramc.h index d8aeb278614e..e4492b151fee 100644 --- a/arch/arm/mach-at91/include/mach/at91_ramc.h +++ b/arch/arm/mach-at91/include/mach/at91_ramc.h @@ -25,8 +25,8 @@ extern void __iomem *at91_ramc_base[]; #define AT91_MEMCTRL_SDRAMC 1 #define AT91_MEMCTRL_DDRSDR 2 -#include <mach/at91rm9200_sdramc.h> -#include <mach/at91sam9_ddrsdr.h> -#include <mach/at91sam9_sdramc.h> +#include <soc/at91/at91rm9200_sdramc.h> +#include <soc/at91/at91sam9_ddrsdr.h> +#include <soc/at91/at91sam9_sdramc.h> #endif /* __AT91_RAMC_H__ */ diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h b/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h deleted file mode 100644 index aa047f458f1b..000000000000 --- a/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Memory Controllers (SDRAMC only) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_SDRAMC_H -#define AT91RM9200_SDRAMC_H - -/* SDRAM Controller registers */ -#define AT91RM9200_SDRAMC_MR 0x90 /* Mode Register */ -#define AT91RM9200_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91RM9200_SDRAMC_MODE_NORMAL (0 << 0) -#define AT91RM9200_SDRAMC_MODE_NOP (1 << 0) -#define AT91RM9200_SDRAMC_MODE_PRECHARGE (2 << 0) -#define AT91RM9200_SDRAMC_MODE_LMR (3 << 0) -#define AT91RM9200_SDRAMC_MODE_REFRESH (4 << 0) -#define AT91RM9200_SDRAMC_DBW (1 << 4) /* Data Bus Width */ -#define AT91RM9200_SDRAMC_DBW_32 (0 << 4) -#define AT91RM9200_SDRAMC_DBW_16 (1 << 4) - -#define AT91RM9200_SDRAMC_TR 0x94 /* Refresh Timer Register */ -#define AT91RM9200_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ - -#define AT91RM9200_SDRAMC_CR 0x98 /* Configuration Register */ -#define AT91RM9200_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91RM9200_SDRAMC_NC_8 (0 << 0) -#define AT91RM9200_SDRAMC_NC_9 (1 << 0) -#define AT91RM9200_SDRAMC_NC_10 (2 << 0) -#define AT91RM9200_SDRAMC_NC_11 (3 << 0) -#define AT91RM9200_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91RM9200_SDRAMC_NR_11 (0 << 2) -#define AT91RM9200_SDRAMC_NR_12 (1 << 2) -#define AT91RM9200_SDRAMC_NR_13 (2 << 2) -#define AT91RM9200_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91RM9200_SDRAMC_NB_2 (0 << 4) -#define AT91RM9200_SDRAMC_NB_4 (1 << 4) -#define AT91RM9200_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91RM9200_SDRAMC_CAS_2 (2 << 5) -#define AT91RM9200_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ -#define AT91RM9200_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ -#define AT91RM9200_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ -#define AT91RM9200_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ -#define AT91RM9200_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ -#define AT91RM9200_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ - -#define AT91RM9200_SDRAMC_SRR 0x9c /* Self Refresh Register */ -#define AT91RM9200_SDRAMC_LPR 0xa0 /* Low Power Register */ -#define AT91RM9200_SDRAMC_IER 0xa4 /* Interrupt Enable Register */ -#define AT91RM9200_SDRAMC_IDR 0xa8 /* Interrupt Disable Register */ -#define AT91RM9200_SDRAMC_IMR 0xac /* Interrupt Mask Register */ -#define AT91RM9200_SDRAMC_ISR 0xb0 /* Interrupt Status Register */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h deleted file mode 100644 index 0210797abf2e..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Header file for the Atmel DDR/SDR SDRAM Controller - * - * Copyright (C) 2010 Atmel Corporation - * Nicolas Ferre <nicolas.ferre@atmel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef AT91SAM9_DDRSDR_H -#define AT91SAM9_DDRSDR_H - -#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ -#define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */ -#define AT91_DDRSDRC_MODE_NORMAL 0 -#define AT91_DDRSDRC_MODE_NOP 1 -#define AT91_DDRSDRC_MODE_PRECHARGE 2 -#define AT91_DDRSDRC_MODE_LMR 3 -#define AT91_DDRSDRC_MODE_REFRESH 4 -#define AT91_DDRSDRC_MODE_EXT_LMR 5 -#define AT91_DDRSDRC_MODE_DEEP 6 - -#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ -#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ -#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_DDRSDRC_NC_SDR8 (0 << 0) -#define AT91_DDRSDRC_NC_SDR9 (1 << 0) -#define AT91_DDRSDRC_NC_SDR10 (2 << 0) -#define AT91_DDRSDRC_NC_SDR11 (3 << 0) -#define AT91_DDRSDRC_NC_DDR9 (0 << 0) -#define AT91_DDRSDRC_NC_DDR10 (1 << 0) -#define AT91_DDRSDRC_NC_DDR11 (2 << 0) -#define AT91_DDRSDRC_NC_DDR12 (3 << 0) -#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_DDRSDRC_NR_11 (0 << 2) -#define AT91_DDRSDRC_NR_12 (1 << 2) -#define AT91_DDRSDRC_NR_13 (2 << 2) -#define AT91_DDRSDRC_NR_14 (3 << 2) -#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ -#define AT91_DDRSDRC_CAS_2 (2 << 4) -#define AT91_DDRSDRC_CAS_3 (3 << 4) -#define AT91_DDRSDRC_CAS_25 (6 << 4) -#define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */ -#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ -#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL [SAM9 Only] */ -#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver [SAM9 Only] */ -#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared [SAM9 Only] */ -#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */ - -#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ -#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ -#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ -#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ -#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ -#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ -#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ -#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */ -#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ - -#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ -#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ -#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ -#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ -#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ - -#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register [SAM9 Only] */ -#define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */ -#define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */ -#define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */ -#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ - -#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ -#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_DDRSDRC_LPCB_DISABLE 0 -#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 -#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 -#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ -#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ -#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) -#define AT91_DDRSDRC_APDE (1 << 16) /* Active power down exit time */ -#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ - -#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ -#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ -#define AT91_DDRSDRC_MD_SDR 0 -#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */ -#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ -#define AT91_DDRSDRC_DBW_32BITS (0 << 4) -#define AT91_DDRSDRC_DBW_16BITS (1 << 4) - -#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ -#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ -#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ -#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ - -#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */ -#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ - -#define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */ - -#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register [SAM9 Only] */ -#define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */ -#define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */ -#define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */ - -#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register [SAM9 Only] */ -#define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */ -#define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h deleted file mode 100644 index 3d085a9a7450..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * SDRAM Controllers (SDRAMC) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9_SDRAMC_H -#define AT91SAM9_SDRAMC_H - -/* SDRAM Controller (SDRAMC) registers */ -#define AT91_SDRAMC_MR 0x00 /* SDRAM Controller Mode Register */ -#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91_SDRAMC_MODE_NORMAL 0 -#define AT91_SDRAMC_MODE_NOP 1 -#define AT91_SDRAMC_MODE_PRECHARGE 2 -#define AT91_SDRAMC_MODE_LMR 3 -#define AT91_SDRAMC_MODE_REFRESH 4 -#define AT91_SDRAMC_MODE_EXT_LMR 5 -#define AT91_SDRAMC_MODE_DEEP 6 - -#define AT91_SDRAMC_TR 0x04 /* SDRAM Controller Refresh Timer Register */ -#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_SDRAMC_CR 0x08 /* SDRAM Controller Configuration Register */ -#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_SDRAMC_NC_8 (0 << 0) -#define AT91_SDRAMC_NC_9 (1 << 0) -#define AT91_SDRAMC_NC_10 (2 << 0) -#define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_SDRAMC_NR_11 (0 << 2) -#define AT91_SDRAMC_NR_12 (1 << 2) -#define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91_SDRAMC_CAS_1 (1 << 5) -#define AT91_SDRAMC_CAS_2 (2 << 5) -#define AT91_SDRAMC_CAS_3 (3 << 5) -#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ -#define AT91_SDRAMC_DBW_32 (0 << 7) -#define AT91_SDRAMC_DBW_16 (1 << 7) -#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ -#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ -#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ -#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ -#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ -#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ - -#define AT91_SDRAMC_LPR 0x10 /* SDRAM Controller Low Power Register */ -#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_SDRAMC_LPCB_DISABLE 0 -#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 -#define AT91_SDRAMC_LPCB_POWER_DOWN 2 -#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */ -#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) - -#define AT91_SDRAMC_IER 0x14 /* SDRAM Controller Interrupt Enable Register */ -#define AT91_SDRAMC_IDR 0x18 /* SDRAM Controller Interrupt Disable Register */ -#define AT91_SDRAMC_IMR 0x1C /* SDRAM Controller Interrupt Mask Register */ -#define AT91_SDRAMC_ISR 0x20 /* SDRAM Controller Interrupt Status Register */ -#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ - -#define AT91_SDRAMC_MDR 0x24 /* SDRAM Memory Device Register */ -#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ -#define AT91_SDRAMC_MD_SDRAM 0 -#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h deleted file mode 100644 index 38dca2bb027f..000000000000 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91x40.h - * - * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91X40_H -#define AT91X40_H - -/* - * IRQ list. - */ -#define AT91X40_ID_USART0 2 /* USART port 0 */ -#define AT91X40_ID_USART1 3 /* USART port 1 */ -#define AT91X40_ID_TC0 4 /* Timer/Counter 0 */ -#define AT91X40_ID_TC1 5 /* Timer/Counter 1*/ -#define AT91X40_ID_TC2 6 /* Timer/Counter 2*/ -#define AT91X40_ID_WD 7 /* Watchdog? */ -#define AT91X40_ID_PIOA 8 /* Parallel IO Controller A */ - -#define AT91X40_ID_IRQ0 16 /* External IRQ 0 */ -#define AT91X40_ID_IRQ1 17 /* External IRQ 1 */ -#define AT91X40_ID_IRQ2 18 /* External IRQ 2 */ - -/* - * System Peripherals - */ -#define AT91_BASE_SYS 0xffc00000 - -#define AT91_EBI 0xffe00000 /* External Bus Interface */ -#define AT91_SF 0xfff00000 /* Special Function */ -#define AT91_USART1 0xfffcc000 /* USART 1 */ -#define AT91_USART0 0xfffd0000 /* USART 0 */ -#define AT91_TC 0xfffe0000 /* Timer Counter */ -#define AT91_PIOA 0xffff0000 /* PIO Controller A */ -#define AT91_PS 0xffff4000 /* Power Save */ -#define AT91_WD 0xffff8000 /* Watchdog Timer */ - -/* - * The AT91x40 series doesn't have a debug unit like the other AT91 parts. - * But it does have a chip identify register and extension ID, so define at - * least these here. - */ -#define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */ -#define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */ - -/* - * Support defines for the simple Power Controller module. - */ -#define AT91_PS_CR (AT91_PS + 0) /* PS Control register */ -#define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */ - -#define AT91X40_MASTER_CLOCK 40000000 - -#endif /* AT91X40_H */ diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index b27e9ca65653..61914fb35f5d 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -62,7 +62,6 @@ #define ARCH_EXID_SAMA5D43 0x00000003 #define ARCH_EXID_SAMA5D44 0x00000004 -#define ARCH_FAMILY_AT91X92 0x09200000 #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index c13797352688..cacbaa52418f 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -24,9 +24,6 @@ /* sama5d4 */ #define AT91_BASE_DBGU2 0xfc069000 -#if defined(CONFIG_ARCH_AT91X40) -#include <mach/at91x40.h> -#else #include <mach/at91rm9200.h> #include <mach/at91sam9260.h> #include <mach/at91sam9261.h> @@ -51,8 +48,6 @@ */ #define AT91_BASE_SYS 0xffffc000 -#endif - /* * On sama5d4 there is no system controller, we map some needed peripherals */ @@ -132,13 +127,8 @@ * called as part of the generic suspend/resume path. */ #ifndef __ASSEMBLY__ -#ifdef CONFIG_PINCTRL_AT91 extern void at91_pinctrl_gpio_suspend(void); extern void at91_pinctrl_gpio_resume(void); -#else -static inline void at91_pinctrl_gpio_suspend(void) {} -static inline void at91_pinctrl_gpio_resume(void) {} -#endif #endif #endif diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h index acb2d890ad7e..4ebb609369e3 100644 --- a/arch/arm/mach-at91/include/mach/uncompress.h +++ b/arch/arm/mach-at91/include/mach/uncompress.h @@ -31,7 +31,6 @@ void __iomem *at91_uart; -#if !defined(CONFIG_ARCH_AT91X40) static const u32 uarts_rm9200[] = { AT91_BASE_DBGU0, AT91RM9200_BASE_US0, @@ -188,12 +187,6 @@ static inline void arch_decomp_setup(void) at91_uart = NULL; } -#else -static inline void arch_decomp_setup(void) -{ - at91_uart = NULL; -} -#endif /* * The following code assumes the serial port has already been |