diff options
Diffstat (limited to 'arch/arm/boot/dts/r7s72100-gr-peach.dts')
| -rw-r--r-- | arch/arm/boot/dts/r7s72100-gr-peach.dts | 73 |
1 files changed, 72 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts index a1b2aef984f6..779f724b4531 100644 --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -11,6 +11,8 @@ /dts-v1/; #include "r7s72100.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/r7s72100-pinctrl.h> / { model = "GR-Peach"; @@ -28,7 +30,6 @@ memory@20000000 { device_type = "memory"; reg = <0x20000000 0x00a00000>; - }; lbsc { @@ -51,6 +52,44 @@ reg = <0x00600000 0x00200000>; }; }; + + leds { + status = "okay"; + compatible = "gpio-leds"; + + led1 { + gpios = <&port6 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + scif2_pins: serial2 { + /* P6_2 as RxD2; P6_3 as TxD2 */ + pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>; + }; + + ether_pins: ether { + /* Ethernet on Ports 1,3,5,10 */ + pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL */ + <RZA1_PINMUX(3, 0, 2)>, /* P3_0 = ET_TXCLK */ + <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */ + <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */ + <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */ + <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */ + <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */ + <RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER */ + <RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN */ + <RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS */ + <RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0 */ + <RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1 */ + <RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2 */ + <RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3 */ + <RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0 */ + <RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1 */ + <RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */ + <RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */ + }; }; &extal_clk { @@ -61,6 +100,38 @@ clock-frequency = <48000000>; }; +&mtu2 { + status = "okay"; +}; + +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + &scif2 { + pinctrl-names = "default"; + pinctrl-0 = <&scif2_pins>; + + status = "okay"; +}; + +ðer { + pinctrl-names = "default"; + pinctrl-0 = <ðer_pins>; + status = "okay"; + + renesas,no-ether-link; + phy-handle = <&phy0>; + + phy0: ethernet-phy@0 { + reg = <0>; + + reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <5>; + }; }; |