diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-ata | 171 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-block-device | 58 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-scsi_host | 89 | ||||
| -rw-r--r-- | Documentation/accelerators/ocxl.rst | 5 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/dma/mv-xor-v2.txt | 6 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/marvell.txt | 48 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/renesas,ravb.txt | 7 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/usb/dwc2.txt | 2 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/usb/renesas_usb3.txt | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/usb/usb-xhci.txt | 1 | ||||
| -rw-r--r-- | Documentation/ia64/serial.txt | 2 | ||||
| -rw-r--r-- | Documentation/networking/segmentation-offloads.txt | 18 | ||||
| -rw-r--r-- | Documentation/sphinx/kerneldoc.py | 3 |
16 files changed, 311 insertions, 106 deletions
diff --git a/Documentation/ABI/testing/sysfs-ata b/Documentation/ABI/testing/sysfs-ata index aa4296498859..9ab0ef1dd1c7 100644 --- a/Documentation/ABI/testing/sysfs-ata +++ b/Documentation/ABI/testing/sysfs-ata @@ -1,110 +1,139 @@ What: /sys/class/ata_... -Date: August 2008 -Contact: Gwendal Grignou<gwendal@google.com> Description: - -Provide a place in sysfs for storing the ATA topology of the system. This allows -retrieving various information about ATA objects. + Provide a place in sysfs for storing the ATA topology of the + system. This allows retrieving various information about ATA + objects. Files under /sys/class/ata_port ------------------------------- - For each port, a directory ataX is created where X is the ata_port_id of - the port. The device parent is the ata host device. +For each port, a directory ataX is created where X is the ata_port_id of the +port. The device parent is the ata host device. -idle_irq (read) - Number of IRQ received by the port while idle [some ata HBA only]. +What: /sys/class/ata_port/ataX/nr_pmp_links +What: /sys/class/ata_port/ataX/idle_irq +Date: May, 2010 +KernelVersion: v2.6.37 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + nr_pmp_links: (RO) If a SATA Port Multiplier (PM) is + connected, the number of links behind it. -nr_pmp_links (read) + idle_irq: (RO) Number of IRQ received by the port while + idle [some ata HBA only]. - If a SATA Port Multiplier (PM) is connected, number of link behind it. + +What: /sys/class/ata_port/ataX/port_no +Date: May, 2013 +KernelVersion: v3.11 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + (RO) Host local port number. While registering host controller, + port numbers are tracked based upon number of ports available on + the controller. This attribute is needed by udev for composing + persistent links in /dev/disk/by-path. Files under /sys/class/ata_link ------------------------------- - Behind each port, there is a ata_link. If there is a SATA PM in the - topology, 15 ata_link objects are created. - - If a link is behind a port, the directory name is linkX, where X is - ata_port_id of the port. - If a link is behind a PM, its name is linkX.Y where X is ata_port_id - of the parent port and Y the PM port. +Behind each port, there is a ata_link. If there is a SATA PM in the topology, 15 +ata_link objects are created. -hw_sata_spd_limit +If a link is behind a port, the directory name is linkX, where X is ata_port_id +of the port. If a link is behind a PM, its name is linkX.Y where X is +ata_port_id of the parent port and Y the PM port. - Maximum speed supported by the connected SATA device. -sata_spd_limit +What: /sys/class/ata_link/linkX[.Y]/hw_sata_spd_limit +What: /sys/class/ata_link/linkX[.Y]/sata_spd_limit +What: /sys/class/ata_link/linkX[.Y]/sata_spd +Date: May, 2010 +KernelVersion: v2.6.37 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + hw_sata_spd_limit: (RO) Maximum speed supported by the + connected SATA device. - Maximum speed imposed by libata. + sata_spd_limit: (RO) Maximum speed imposed by libata. -sata_spd + sata_spd: (RO) Current speed of the link + eg. 1.5, 3 Gbps etc. - Current speed of the link [1.5, 3Gps,...]. Files under /sys/class/ata_device --------------------------------- - Behind each link, up to two ata device are created. - The name of the directory is devX[.Y].Z where: - - X is ata_port_id of the port where the device is connected, - - Y the port of the PM if any, and - - Z the device id: for PATA, there is usually 2 devices [0,1], - only 1 for SATA. - -class - Device class. Can be "ata" for disk, "atapi" for packet device, - "pmp" for PM, or "none" if no device was found behind the link. - -dma_mode +Behind each link, up to two ata devices are created. +The name of the directory is devX[.Y].Z where: +- X is ata_port_id of the port where the device is connected, +- Y the port of the PM if any, and +- Z the device id: for PATA, there is usually 2 devices [0,1], only 1 for SATA. + + +What: /sys/class/ata_device/devX[.Y].Z/spdn_cnt +What: /sys/class/ata_device/devX[.Y].Z/gscr +What: /sys/class/ata_device/devX[.Y].Z/ering +What: /sys/class/ata_device/devX[.Y].Z/id +What: /sys/class/ata_device/devX[.Y].Z/pio_mode +What: /sys/class/ata_device/devX[.Y].Z/xfer_mode +What: /sys/class/ata_device/devX[.Y].Z/dma_mode +What: /sys/class/ata_device/devX[.Y].Z/class +Date: May, 2010 +KernelVersion: v2.6.37 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + spdn_cnt: (RO) Number of times libata decided to lower the + speed of link due to errors. - Transfer modes supported by the device when in DMA mode. - Mostly used by PATA device. + gscr: (RO) Cached result of the dump of PM GSCR + register. Valid registers are: -pio_mode + 0: SATA_PMP_GSCR_PROD_ID, + 1: SATA_PMP_GSCR_REV, + 2: SATA_PMP_GSCR_PORT_INFO, + 32: SATA_PMP_GSCR_ERROR, + 33: SATA_PMP_GSCR_ERROR_EN, + 64: SATA_PMP_GSCR_FEAT, + 96: SATA_PMP_GSCR_FEAT_EN, + 130: SATA_PMP_GSCR_SII_GPIO - Transfer modes supported by the device when in PIO mode. - Mostly used by PATA device. + Only valid if the device is a PM. -xfer_mode + ering: (RO) Formatted output of the error ring of the + device. - Current transfer mode. + id: (RO) Cached result of IDENTIFY command, as + described in ATA8 7.16 and 7.17. Only valid if + the device is not a PM. -id + pio_mode: (RO) Transfer modes supported by the device when + in PIO mode. Mostly used by PATA device. - Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17. - Only valid if the device is not a PM. + xfer_mode: (RO) Current transfer mode -gscr + dma_mode: (RO) Transfer modes supported by the device when + in DMA mode. Mostly used by PATA device. - Cached result of the dump of PM GSCR register. - Valid registers are: - 0: SATA_PMP_GSCR_PROD_ID, - 1: SATA_PMP_GSCR_REV, - 2: SATA_PMP_GSCR_PORT_INFO, - 32: SATA_PMP_GSCR_ERROR, - 33: SATA_PMP_GSCR_ERROR_EN, - 64: SATA_PMP_GSCR_FEAT, - 96: SATA_PMP_GSCR_FEAT_EN, - 130: SATA_PMP_GSCR_SII_GPIO - Only valid if the device is a PM. + class: (RO) Device class. Can be "ata" for disk, + "atapi" for packet device, "pmp" for PM, or + "none" if no device was found behind the link. -trim - Shows the DSM TRIM mode currently used by the device. Valid - values are: - unsupported: Drive does not support DSM TRIM - unqueued: Drive supports unqueued DSM TRIM only - queued: Drive supports queued DSM TRIM - forced_unqueued: Drive's queued DSM support is known to be - buggy and only unqueued TRIM commands - are sent +What: /sys/class/ata_device/devX[.Y].Z/trim +Date: May, 2015 +KernelVersion: v4.10 +Contact: Gwendal Grignou <gwendal@chromium.org> +Description: + (RO) Shows the DSM TRIM mode currently used by the device. Valid + values are: -spdn_cnt + unsupported: Drive does not support DSM TRIM - Number of time libata decided to lower the speed of link due to errors. + unqueued: Drive supports unqueued DSM TRIM only -ering + queued: Drive supports queued DSM TRIM - Formatted output of the error ring of the device. + forced_unqueued: Drive's queued DSM support is known to + be buggy and only unqueued TRIM commands + are sent diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device new file mode 100644 index 000000000000..82ef6eab042d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-device @@ -0,0 +1,58 @@ +What: /sys/block/*/device/sw_activity +Date: Jun, 2008 +KernelVersion: v2.6.27 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Used by drivers which support software controlled activity + LEDs. + + It has the following valid values: + + 0 OFF - the LED is not activated on activity + 1 BLINK_ON - the LED blinks on every 10ms when activity is + detected. + 2 BLINK_OFF - the LED is on when idle, and blinks off + every 10ms when activity is detected. + + Note that the user must turn sw_activity OFF it they wish to + control the activity LED via the em_message file. + + +What: /sys/block/*/device/unload_heads +Date: Sep, 2008 +KernelVersion: v2.6.28 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Hard disk shock protection + + Writing an integer value to this file will take the heads of the + respective drive off the platter and block all I/O operations + for the specified number of milliseconds. + + - If the device does not support the unload heads feature, + access is denied with -EOPNOTSUPP. + - The maximal value accepted for a timeout is 30000 + milliseconds. + - A previously set timeout can be cancelled and disk can resume + normal operation immediately by specifying a timeout of 0. + - Some hard drives only comply with an earlier version of the + ATA standard, but support the unload feature nonetheless. + There is no safe way Linux can detect these devices, so this + is not enabled by default. If it is known that your device + does support the unload feature, then you can tell the kernel + to enable it by writing -1. It can be disabled again by + writing -2. + - Values below -2 are rejected with -EINVAL + + For more information, see + Documentation/laptops/disk-shock-protection.txt + + +What: /sys/block/*/device/ncq_prio_enable +Date: Oct, 2016 +KernelVersion: v4.10 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Write to the file to turn on or off the SATA ncq (native + command queueing) support. By default this feature is turned + off. diff --git a/Documentation/ABI/testing/sysfs-class-scsi_host b/Documentation/ABI/testing/sysfs-class-scsi_host index 0eb255e7db12..bafc59fd7b69 100644 --- a/Documentation/ABI/testing/sysfs-class-scsi_host +++ b/Documentation/ABI/testing/sysfs-class-scsi_host @@ -27,3 +27,92 @@ Description: This file contains the current status of the "SSD Smart Path" the direct i/o path to physical devices. This setting is controller wide, affecting all configured logical drives on the controller. This file is readable and writable. + +What: /sys/class/scsi_host/hostX/link_power_management_policy +Date: Oct, 2007 +KernelVersion: v2.6.24 +Contact: linux-ide@vger.kernel.org +Description: + (RW) This parameter allows the user to read and set the link + (interface) power management. + + There are four possible options: + + min_power: Tell the controller to try to make the link use the + least possible power when possible. This may sacrifice some + performance due to increased latency when coming out of lower + power states. + + max_performance: Generally, this means no power management. + Tell the controller to have performance be a priority over power + management. + + medium_power: Tell the controller to enter a lower power state + when possible, but do not enter the lowest power state, thus + improving latency over min_power setting. + + med_power_with_dipm: Identical to the existing medium_power + setting except that it enables dipm (device initiated power + management) on top, which makes it match the Windows IRST (Intel + Rapid Storage Technology) driver settings. This setting is also + close to min_power, except that: + a) It does not use host-initiated slumber mode, but it does + allow device-initiated slumber + b) It does not enable low power device sleep mode (DevSlp). + +What: /sys/class/scsi_host/hostX/em_message +What: /sys/class/scsi_host/hostX/em_message_type +Date: Jun, 2008 +KernelVersion: v2.6.27 +Contact: linux-ide@vger.kernel.org +Description: + em_message: (RW) Enclosure management support. For the LED + protocol, writes and reads correspond to the LED message format + as defined in the AHCI spec. + + The user must turn sw_activity (under /sys/block/*/device/) OFF + it they wish to control the activity LED via the em_message + file. + + em_message_type: (RO) Displays the current enclosure management + protocol that is being used by the driver (for eg. LED, SAF-TE, + SES-2, SGPIO etc). + +What: /sys/class/scsi_host/hostX/ahci_port_cmd +What: /sys/class/scsi_host/hostX/ahci_host_caps +What: /sys/class/scsi_host/hostX/ahci_host_cap2 +Date: Mar, 2010 +KernelVersion: v2.6.35 +Contact: linux-ide@vger.kernel.org +Description: + [to be documented] + +What: /sys/class/scsi_host/hostX/ahci_host_version +Date: Mar, 2010 +KernelVersion: v2.6.35 +Contact: linux-ide@vger.kernel.org +Description: + (RO) Display the version of the AHCI spec implemented by the + host. + +What: /sys/class/scsi_host/hostX/em_buffer +Date: Apr, 2010 +KernelVersion: v2.6.35 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Allows access to AHCI EM (enclosure management) buffer + directly if the host supports EM. + + For eg. the AHCI driver supports SGPIO EM messages but the + SATA/AHCI specs do not define the SGPIO message format of the EM + buffer. Different hardware(HW) vendors may have different + definitions. With the em_buffer attribute, this issue can be + solved by allowing HW vendors to provide userland drivers and + tools for their SGPIO initiators. + +What: /sys/class/scsi_host/hostX/em_message_supported +Date: Oct, 2009 +KernelVersion: v2.6.39 +Contact: linux-ide@vger.kernel.org +Description: + (RO) Displays supported enclosure management message types. diff --git a/Documentation/accelerators/ocxl.rst b/Documentation/accelerators/ocxl.rst index 4f7af841d935..ddcc58d01cfb 100644 --- a/Documentation/accelerators/ocxl.rst +++ b/Documentation/accelerators/ocxl.rst @@ -152,6 +152,11 @@ OCXL_IOCTL_IRQ_SET_FD: Associate an event fd to an AFU interrupt so that the user process can be notified when the AFU sends an interrupt. +OCXL_IOCTL_GET_METADATA: + + Obtains configuration information from the card, such at the size of + MMIO areas, the AFU version, and the PASID for the current context. + mmap ---- diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt index 6394ea9e3b9e..58b12e25bbb1 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt @@ -16,6 +16,7 @@ Required properties: - ddc: phandle to the hdmi ddc node - phy: phandle to the hdmi phy node - samsung,syscon-phandle: phandle for system controller node for PMU. +- #sound-dai-cells: should be 0. Required properties for Exynos 4210, 4212, 5420 and 5433: - clocks: list of clock IDs from SoC clock driver. diff --git a/Documentation/devicetree/bindings/dma/mv-xor-v2.txt b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt index 217a90eaabe7..9c38bbe7e6d7 100644 --- a/Documentation/devicetree/bindings/dma/mv-xor-v2.txt +++ b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt @@ -11,7 +11,11 @@ Required properties: interrupts. Optional properties: -- clocks: Optional reference to the clock used by the XOR engine. +- clocks: Optional reference to the clocks used by the XOR engine. +- clock-names: mandatory if there is a second clock, in this case the + name must be "core" for the first clock and "reg" for the second + one + Example: diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt index e9ebb8a20e0d..ba24ca7ba95e 100644 --- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt @@ -3,11 +3,11 @@ Device-Tree bindings for sigma delta modulator Required properties: - compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use as a generic SD modulator if modulator not specified in compatible list. -- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers". +- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers". Example node: ads1202: adc@0 { compatible = "sd-modulator"; - #io-channel-cells = <1>; + #io-channel-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 1d4d0f49c9d0..8c033d48e2ba 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -50,14 +50,15 @@ Example: compatible = "marvell,mv88e6085"; reg = <0>; reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; }; @@ -74,23 +75,24 @@ Example: compatible = "marvell,mv88e6390"; reg = <0>; reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; }; - }; - mdio1 { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - switch1phy9: switch1phy0@9 { - reg = <9>; + mdio1 { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + switch1phy9: switch1phy0@9 { + reg = <9>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index c902261893b9..b4dc455eb155 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -18,6 +18,7 @@ Required properties: - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - "renesas,etheravb-r8a7796" for the R8A7796 SoC. - "renesas,etheravb-r8a77970" for the R8A77970 SoC. + - "renesas,etheravb-r8a77980" for the R8A77980 SoC. - "renesas,etheravb-r8a77995" for the R8A77995 SoC. - "renesas,etheravb-rcar-gen3" as a fallback for the above R-Car Gen3 devices. @@ -26,7 +27,11 @@ Required properties: SoC-specific version corresponding to the platform first followed by the generic version. -- reg: offset and length of (1) the register block and (2) the stream buffer. +- reg: Offset and length of (1) the register block and (2) the stream buffer. + The region for the register block is mandatory. + The region for the stream buffer is optional, as it is only present on + R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A7796), + and M3-N (R8A77965). - interrupts: A list of interrupt-specifiers, one for each entry in interrupt-names. If interrupt-names is not present, an interrupt specifier diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index e64d903bcbe8..46da5f184460 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -19,7 +19,7 @@ Required properties: configured in FS mode; - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs configured in HS mode; - - "st,stm32f7xx-hsotg": The DWC2 USB HS controller instance in STM32F7xx SoCs + - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs configured in HS mode; - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt index 87a45e2f9b7f..2c071bb5801e 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt @@ -4,6 +4,7 @@ Required properties: - compatible: Must contain one of the following: - "renesas,r8a7795-usb3-peri" - "renesas,r8a7796-usb3-peri" + - "renesas,r8a77965-usb3-peri" - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible device diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index d060172f1529..43960faf5a88 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -12,6 +12,7 @@ Required properties: - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device - "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device + - "renesas,usbhs-r8a77965" for r8a77965 (R-Car M3-N) compatible device - "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device - "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device - "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index e2ea59bbca93..1651483a7048 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -13,6 +13,7 @@ Required properties: - "renesas,xhci-r8a7793" for r8a7793 SoC - "renesas,xhci-r8a7795" for r8a7795 SoC - "renesas,xhci-r8a7796" for r8a7796 SoC + - "renesas,xhci-r8a77965" for r8a77965 SoC - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible device - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device diff --git a/Documentation/ia64/serial.txt b/Documentation/ia64/serial.txt index 6869c73de4e2..a63d2c54329b 100644 --- a/Documentation/ia64/serial.txt +++ b/Documentation/ia64/serial.txt @@ -111,7 +111,7 @@ TROUBLESHOOTING SERIAL CONSOLE PROBLEMS - If you don't have an HCDP, the kernel doesn't know where your console lives until the driver discovers serial - devices. Use "console=uart, io,0x3f8" (or appropriate + devices. Use "console=uart,io,0x3f8" (or appropriate address for your machine). Kernel and init script output works fine, but no "login:" prompt: diff --git a/Documentation/networking/segmentation-offloads.txt b/Documentation/networking/segmentation-offloads.txt index d47480b61ac6..aca542ec125c 100644 --- a/Documentation/networking/segmentation-offloads.txt +++ b/Documentation/networking/segmentation-offloads.txt @@ -20,8 +20,8 @@ TCP Segmentation Offload TCP segmentation allows a device to segment a single frame into multiple frames with a data payload size specified in skb_shinfo()->gso_size. -When TCP segmentation requested the bit for either SKB_GSO_TCP or -SKB_GSO_TCP6 should be set in skb_shinfo()->gso_type and +When TCP segmentation requested the bit for either SKB_GSO_TCPV4 or +SKB_GSO_TCPV6 should be set in skb_shinfo()->gso_type and skb_shinfo()->gso_size should be set to a non-zero value. TCP segmentation is dependent on support for the use of partial checksum @@ -153,8 +153,18 @@ To signal this, gso_size is set to the special value GSO_BY_FRAGS. Therefore, any code in the core networking stack must be aware of the possibility that gso_size will be GSO_BY_FRAGS and handle that case -appropriately. (For size checks, the skb_gso_validate_*_len family of -helpers do this automatically.) +appropriately. + +There are some helpers to make this easier: + + - skb_is_gso(skb) && skb_is_gso_sctp(skb) is the best way to see if + an skb is an SCTP GSO skb. + + - For size checks, the skb_gso_validate_*_len family of helpers correctly + considers GSO_BY_FRAGS. + + - For manipulating packets, skb_increase_gso_size and skb_decrease_gso_size + will check for GSO_BY_FRAGS and WARN if asked to manipulate these skbs. This also affects drivers with the NETIF_F_FRAGLIST & NETIF_F_GSO_SCTP bits set. Note also that NETIF_F_GSO_SCTP is included in NETIF_F_GSO_SOFTWARE. diff --git a/Documentation/sphinx/kerneldoc.py b/Documentation/sphinx/kerneldoc.py index 39aa9e8697cc..fbedcc39460b 100644 --- a/Documentation/sphinx/kerneldoc.py +++ b/Documentation/sphinx/kerneldoc.py @@ -36,8 +36,7 @@ import glob from docutils import nodes, statemachine from docutils.statemachine import ViewList -from docutils.parsers.rst import directives -from sphinx.util.compat import Directive +from docutils.parsers.rst import directives, Directive from sphinx.ext.autodoc import AutodocReporter __version__ = '1.0' |