diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
11 files changed, 412 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index 15ac8e8dcfdf..5d1ad09bafb4 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -39,6 +39,8 @@ its hardware characteristcs. - System Trace Macrocell: "arm,coresight-stm", "arm,primecell"; [1] + - Coresight Address Translation Unit (CATU) + "arm,coresight-catu", "arm,primecell"; * reg: physical base address and length of the register set(s) of the component. @@ -84,8 +86,15 @@ its hardware characteristcs. * Optional property for TMC: * arm,buffer-size: size of contiguous buffer space for TMC ETR - (embedded trace router) + (embedded trace router). This property is obsolete. The buffer size + can be configured dynamically via buffer_size property in sysfs. + * arm,scatter-gather: boolean. Indicates that the TMC-ETR can safely + use the SG mode on this system. + +* Optional property for CATU : + * interrupts : Exactly one SPI may be listed for reporting the address + error Example: @@ -118,6 +127,35 @@ Example: }; }; + etr@20070000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x20070000 0 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* input port */ + port@0 { + reg = <0>; + etr_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator2_out_port0>; + }; + }; + + /* CATU link represented by output port */ + port@1 { + reg = <1>; + etr_out_port: endpoint { + remote-endpoint = <&catu_in_port>; + }; + }; + }; + }; + 2. Links replicator { /* non-configurable replicators don't show up on the @@ -247,5 +285,23 @@ Example: }; }; +5. CATU + + catu@207e0000 { + compatible = "arm,coresight-catu", "arm,primecell"; + reg = <0 0x207e0000 0 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + port { + catu_in_port: endpoint { + slave-mode; + remote-endpoint = <&etr_out_port>; + }; + }; + }; + [1]. There is currently two version of STM: STM32 and STM500. Both have the same HW interface and as such don't need an explicit binding name. diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt b/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt new file mode 100644 index 000000000000..3dc752db748b --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt @@ -0,0 +1,36 @@ +Device-tree bindings for ColdFire offloaded gpio-based FSI master driver +------------------------------------------------------------------------ + +Required properties: + - compatible = + "aspeed,ast2400-cf-fsi-master" for an AST2400 based system + or + "aspeed,ast2500-cf-fsi-master" for an AST2500 based system + + - clock-gpios = <gpio-descriptor>; : GPIO for FSI clock + - data-gpios = <gpio-descriptor>; : GPIO for FSI data signal + - enable-gpios = <gpio-descriptor>; : GPIO for enable signal + - trans-gpios = <gpio-descriptor>; : GPIO for voltage translator enable + - mux-gpios = <gpio-descriptor>; : GPIO for pin multiplexing with other + functions (eg, external FSI masters) + - memory-region = <phandle>; : Reference to the reserved memory for + the ColdFire. Must be 2M aligned on + AST2400 and 1M aligned on AST2500 + - aspeed,sram = <phandle>; : Reference to the SRAM node. + - aspeed,cvic = <phandle>; : Reference to the CVIC node. + +Examples: + + fsi-master { + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + + clock-gpios = <&gpio 0>; + data-gpios = <&gpio 1>; + enable-gpios = <&gpio 2>; + trans-gpios = <&gpio 3>; + mux-gpios = <&gpio 4>; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + } diff --git a/Documentation/devicetree/bindings/fsi/fsi.txt b/Documentation/devicetree/bindings/fsi/fsi.txt index ab516c673a4b..afb4eccab131 100644 --- a/Documentation/devicetree/bindings/fsi/fsi.txt +++ b/Documentation/devicetree/bindings/fsi/fsi.txt @@ -83,6 +83,10 @@ addresses and sizes in the slave address space: #address-cells = <1>; #size-cells = <1>; +Optionally, a slave can provide a global unique chip ID which is used to +identify the physical location of the chip in a system specific way + + chip-id = <0>; FSI engines (devices) --------------------- @@ -125,6 +129,7 @@ device tree if no extra platform information is required. reg = <0 0>; #address-cells = <1>; #size-cells = <1>; + chip-id = <0>; /* FSI engine at 0xc00, using a single page. In this example, * it's an I2C master controller, so subnodes describe the diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt new file mode 100644 index 000000000000..f1e4a2ff47c5 --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/gnss.txt @@ -0,0 +1,36 @@ +GNSS Receiver DT binding + +This documents the binding structure and common properties for GNSS receiver +devices. + +A GNSS receiver node is a node named "gnss" and typically resides on a serial +bus (e.g. UART, I2C or SPI). + +Please refer to the following documents for generic properties: + + Documentation/devicetree/bindings/serial/slave-device.txt + Documentation/devicetree/bindings/spi/spi-bus.txt + +Required properties: + +- compatible : A string reflecting the vendor and specific device the node + represents + +Optional properties: +- enable-gpios : GPIO used to enable the device +- timepulse-gpios : Time pulse GPIO + +Example: + +serial@1234 { + compatible = "ns16550a"; + + gnss { + compatible = "u-blox,neo-8"; + + vcc-supply = <&gnss_reg>; + timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + + current-speed = <4800>; + }; +}; diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.txt b/Documentation/devicetree/bindings/gnss/sirfstar.txt new file mode 100644 index 000000000000..648d183cdb77 --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/sirfstar.txt @@ -0,0 +1,45 @@ +SiRFstar-based GNSS Receiver DT binding + +SiRFstar chipsets are used in GNSS-receiver modules produced by several +vendors and can use UART, SPI or I2C interfaces. + +Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic +properties. + +Required properties: + +- compatible : Must be one of + + "fastrax,uc430" + "linx,r4" + "wi2wi,w2sg0008i" + "wi2wi,w2sg0084i" + +- vcc-supply : Main voltage regulator (pin name: 3V3_IN, VCC, VDD) + +Required properties (I2C): +- reg : I2C slave address + +Required properties (SPI): +- reg : SPI chip select address + +Optional properties: + +- sirf,onoff-gpios : GPIO used to power on and off device (pin name: ON_OFF) +- sirf,wakeup-gpios : GPIO used to determine device power state + (pin name: RFPWRUP, WAKEUP) +- timepulse-gpios : Time pulse GPIO (pin name: 1PPS, TM) + +Example: + +serial@1234 { + compatible = "ns16550a"; + + gnss { + compatible = "wi2wi,w2sg0084i"; + + vcc-supply = <&gnss_reg>; + sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/gnss/u-blox.txt b/Documentation/devicetree/bindings/gnss/u-blox.txt new file mode 100644 index 000000000000..e475659cb85f --- /dev/null +++ b/Documentation/devicetree/bindings/gnss/u-blox.txt @@ -0,0 +1,44 @@ +u-blox GNSS Receiver DT binding + +The u-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces. + +Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic +properties. + +Required properties: + +- compatible : Must be one of + + "u-blox,neo-8" + "u-blox,neo-m8" + +- vcc-supply : Main voltage regulator + +Required properties (DDC): +- reg : DDC (I2C) slave address + +Required properties (SPI): +- reg : SPI chip select address + +Required properties (USB): +- reg : Number of the USB hub port or the USB host-controller port + to which this device is attached + +Optional properties: + +- timepulse-gpios : Time pulse GPIO +- u-blox,extint-gpios : GPIO connected to the "external interrupt" input pin +- v-bckp-supply : Backup voltage regulator + +Example: + +serial@1234 { + compatible = "ns16550a"; + + gnss { + compatible = "u-blox,neo-8"; + + v-bckp-supply = <&gnss_v_bckp_reg>; + vcc-supply = <&gnss_vcc_reg>; + }; +}; diff --git a/Documentation/devicetree/bindings/mux/adi,adgs1408.txt b/Documentation/devicetree/bindings/mux/adi,adgs1408.txt new file mode 100644 index 000000000000..be6947f4d86b --- /dev/null +++ b/Documentation/devicetree/bindings/mux/adi,adgs1408.txt @@ -0,0 +1,48 @@ +Bindings for Analog Devices ADGS1408/1409 8:1/Dual 4:1 Mux + +Required properties: +- compatible : Should be one of + * "adi,adgs1408" + * "adi,adgs1409" +* Standard mux-controller bindings as described in mux-controller.txt + +Optional properties for ADGS1408/1409: +- gpio-controller : if present, #gpio-cells is required. +- #gpio-cells : should be <2> + - First cell is the GPO line number, i.e. 0 to 3 + for ADGS1408 and 0 to 4 for ADGS1409 + - Second cell is used to specify active high (0) + or active low (1) + +Optional properties: +- idle-state : if present, the state that the mux controller will have + when idle. The special state MUX_IDLE_AS_IS is the default and + MUX_IDLE_DISCONNECT is also supported. + +States 0 through 7 correspond to signals S1 through S8 in the datasheet. +For ADGS1409 only states 0 to 3 are available. + +Example: + + /* + * One mux controller. + * Mux state set to idle as is (no idle-state declared) + */ + &spi0 { + mux: mux-controller@0 { + compatible = "adi,adgs1408"; + reg = <0>; + spi-max-frequency = <1000000>; + #mux-control-cells = <0>; + }; + } + + adc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 1>; + io-channel-names = "parent"; + mux-controls = <&mux>; + + channels = "out_a0", "out_a1", "test0", "test1", + "out_b0", "out_b1", "testb0", "testb1"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt index 729f6747813b..792bc5fafeb9 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt @@ -1,7 +1,7 @@ Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings This binding represents the on-chip eFuse OTP controller found on -i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX and i.MX6UL SoCs. +i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL and i.MX6SLL SoCs. Required properties: - compatible: should be one of @@ -10,6 +10,7 @@ Required properties: "fsl,imx6sx-ocotp" (i.MX6SX), "fsl,imx6ul-ocotp" (i.MX6UL), "fsl,imx7d-ocotp" (i.MX7D/S), + "fsl,imx6sll-ocotp" (i.MX6SLL), followed by "syscon". - #address-cells : Should be 1 - #size-cells : Should be 1 diff --git a/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt new file mode 100644 index 000000000000..586c08286aa9 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt @@ -0,0 +1,52 @@ += Spreadtrum SC27XX PMIC eFuse device tree bindings = + +Required properties: +- compatible: Should be one of the following. + "sprd,sc2720-efuse" + "sprd,sc2721-efuse" + "sprd,sc2723-efuse" + "sprd,sc2730-efuse" + "sprd,sc2731-efuse" +- reg: Specify the address offset of efuse controller. +- hwlocks: Reference to a phandle of a hwlock provider node. + += Data cells = +Are child nodes of eFuse, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + efuse@380 { + compatible = "sprd,sc2731-efuse"; + reg = <0x380>; + #address-cells = <1>; + #size-cells = <1>; + hwlocks = <&hwlock 12>; + + /* Data cells */ + thermal_calib: calib@10 { + reg = <0x10 0x2>; + }; + }; + }; + += Data consumers = +Are device nodes which consume nvmem data cells. + +Example: + + thermal { + ... + nvmem-cells = <&thermal_calib>; + nvmem-cell-names = "calibration"; + }; diff --git a/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt new file mode 100644 index 000000000000..e94a2ad3a710 --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt @@ -0,0 +1,84 @@ +Qualcomm SLIMBus Non Generic Device (NGD) Controller binding + +SLIMBus NGD controller is a light-weight driver responsible for communicating +with SLIMBus slaves directly over the bus using messaging interface and +communicating with master component residing on ADSP for bandwidth and +data-channel management + +Please refer to slimbus/bus.txt for details of the common SLIMBus bindings. + +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be "qcom,slim-ngd-v<MAJOR>.<MINOR>.<STEP>" + must be one of the following. + "qcom,slim-ngd-v1.5.0" for MSM8996 + "qcom,slim-ngd-v2.1.0" for SDM845 + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: must specify the base address and size of the controller + register space. +- dmas + Usage: required + Value type: <array of phandles> + Definition: List of rx and tx dma channels + +- dma-names + Usage: required + Value type: <stringlist> + Definition: must be "rx" and "tx". + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: must list controller IRQ. + +#address-cells + Usage: required + Value type: <u32> + Definition: Should be 1, reflecting the instance id of ngd. + +#size-cells + Usage: required + Value type: <u32> + Definition: Should be 0 + += NGD Devices +Each subnode represents an instance of NGD, must contain the following +properties: + +- reg: + Usage: required + Value type: <u32> + Definition: Should be instance id of ngd. + +#address-cells + Usage: required + Refer to slimbus/bus.txt for details of the common SLIMBus bindings. + +#size-cells + Usage: required + Refer to slimbus/bus.txt for details of the common SLIMBus bindings. + += EXAMPLE + +slim@91c0000 { + compatible = "qcom,slim-ngd-v1.5.0"; + reg = <0x91c0000 0x2c000>; + interrupts = <0 163 0>; + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + ngd@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + codec@1 { + compatible = "slim217,1a0"; + reg = <1 0>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index f32b79814dd7..2f3620547249 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -129,6 +129,7 @@ excito Excito ezchip EZchip Semiconductor fairphone Fairphone B.V. faraday Faraday Technology Corporation +fastrax Fastrax Oy fcs Fairchild Semiconductor firefly Firefly focaltech FocalTech Systems Co.,Ltd @@ -209,6 +210,7 @@ licheepi Lichee Pi linaro Linaro Limited linksys Belkin International, Inc. (Linksys) linux Linux-specific binding +linx Linx Technologies lltc Linear Technology Corporation logicpd Logic PD, Inc. lsi LSI Corp. (LSI Logic) @@ -390,6 +392,7 @@ tronsmart Tronsmart truly Truly Semiconductors Limited tsd Theobroma Systems Design und Consulting GmbH tyan Tyan Computer Corporation +u-blox u-blox ucrobotics uCRobotics ubnt Ubiquiti Networks udoo Udoo |