diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt | 181 |
1 files changed, 181 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt new file mode 100644 index 000000000000..93b7de91b9f6 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt @@ -0,0 +1,181 @@ +Qualcomm MSM8960 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +MSM8960 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,msm8960-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio151, + sdc1_clk, + sdc1_cmd, + sdc1_data + sdc3_clk, + sdc3_cmd, + sdc3_data + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2, + codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking, + gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a, + gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a, + gp_pdm_0b, gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gpio, + gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, + gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, + gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l, + gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l, + gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, + gsbi11, gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n, + gsbi11_spi_cs2a_n, gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n, + gsbi12, hdmi_cec, hdmi_ddc_clock, hdmi_ddc_data, + hdmi_hot_plug_detect, hsic, mdp_vsync, mi2s, mic_i2s, + pmb_clk, pmb_ext_ctrl, ps_hold, rpm_wdog, sdc2, sdc4, sdc5, + slimbus1, slimbus2, spkr_i2s, ssbi1, ssbi2, ssbi_ext_gps, + ssbi_pmic2, ssbi_qpa1, ssbi_ts, tsif1, tsif2, ts_eoc, + usb_fs1, usb_fs1_oe, usb_fs1_oe_n, usb_fs2, usb_fs2_oe, + usb_fs2_oe_n, vfe_camif_timer1_a, vfe_camif_timer1_b, + vfe_camif_timer2, vfe_camif_timer3_a, vfe_camif_timer3_b, + vfe_camif_timer4_a, vfe_camif_timer4_b, vfe_camif_timer4_c, + vfe_camif_timer5_a, vfe_camif_timer5_b, vfe_camif_timer6_a, + vfe_camif_timer6_b, vfe_camif_timer6_c, vfe_camif_timer7_a, + vfe_camif_timer7_b, vfe_camif_timer7_c, wlan + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8960-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 0x4>; + + gsbi8_uart: gsbi8-uart { + mux { + pins = "gpio34", "gpio35"; + function = "gsbi8"; + }; + + tx { + pins = "gpio34"; + drive-strength = <4>; + bias-disable; + }; + + rx { + pins = "gpio35"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; |