diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio')
33 files changed, 0 insertions, 39 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/adxl345.txt b/Documentation/devicetree/bindings/iio/accel/adxl345.txt index e7111b02c02c..ae09a046bc72 100644 --- a/Documentation/devicetree/bindings/iio/accel/adxl345.txt +++ b/Documentation/devicetree/bindings/iio/accel/adxl345.txt @@ -11,8 +11,6 @@ Required properties for SPI bus usage: - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3 Optional properties: - - interrupt-parent : phandle to the parent interrupt controller as documented - in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupts: interrupt mapping for IRQ as documented in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt index 4a3679d54457..3b25b4c4d446 100644 --- a/Documentation/devicetree/bindings/iio/accel/bma180.txt +++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt @@ -10,8 +10,6 @@ Required properties: Optional properties: - - interrupt-parent : should be the phandle for the interrupt controller - - interrupts : interrupt mapping for GPIO IRQ, it should by configured with flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING For the bma250 the first interrupt listed must be the one diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt index 45f5c5c5929c..2100e9af379c 100644 --- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt @@ -15,8 +15,6 @@ Required properties: Optional properties: - - interrupt-parent: should be the phandle for the interrupt controller - - interrupts: interrupt mapping for GPIO IRQ - interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's diff --git a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt index 487ea966858e..ec04008e8f4f 100644 --- a/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt @@ -2,7 +2,6 @@ Motorola CPCAP PMIC ADC binding Required properties: - compatible: Should be "motorola,cpcap-adc" or "motorola,mapphone-cpcap-adc" -- interrupt-parent: The interrupt controller - interrupts: The interrupt number for the ADC device - interrupt-names: Should be "adcdone" - #io-channel-cells: Number of cells in an IIO specifier diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt index b0866d36a307..eebdcec3dab5 100644 --- a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt +++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt @@ -8,7 +8,6 @@ Required properties: - reg: Should be the register range of the module. - interrupts: Should be the interrupt number of the module. Typically this is <1>. - - interrupt-parent: phandle to the tsadc module of the i.MX25. - #address-cells: Should be <1> (setting for the subnodes) - #size-cells: Should be <0> (setting for the subnodes) diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt index a8770cc6bcad..e680c61dfb84 100644 --- a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt @@ -3,8 +3,6 @@ Required properties: - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031" - reg: SPI chip select number for the device - - interrupt-parent: phandle to the parent interrupt controller - see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupts: IRQ line for the ADC see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt index f1ead43a1a95..8346bcb04ad7 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -60,7 +60,6 @@ Required properties: - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200). - clocks: Input clock private to this ADC instance. It's required only on stm32f4, that has per instance clock input for registers access. -- interrupt-parent: Phandle to the parent interrupt controller. - interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or 2 for adc@200). - st,adc-channels: List of single-ended channels muxed for this ADC. diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt index d71258e2d456..e0e0755cabd8 100644 --- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt @@ -22,7 +22,6 @@ Required properties: clock to the AXI bus interface of the core. Optional properties: - - interrupt-parent: phandle to the parent interrupt controller - xlnx,external-mux: * "none": No external multiplexer is used, this is the default if the property is omitted. diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt index 2962bd9a2b3d..f4320595b851 100644 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,ec-sm.txt @@ -6,7 +6,6 @@ Required properties: - compatible: must be "atlas,ec-sm" - reg: the I2C address of the sensor - - interrupt-parent: should be the phandle for the interrupt controller - interrupts: the sole interrupt generated by the device Refer to interrupt-controller/interrupts.txt for generic interrupt client diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt index 5d8b687d5edc..af1f5a9aa4da 100644 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt @@ -6,7 +6,6 @@ Required properties: - compatible: must be "atlas,orp-sm" - reg: the I2C address of the sensor - - interrupt-parent: should be the phandle for the interrupt controller - interrupts: the sole interrupt generated by the device Refer to interrupt-controller/interrupts.txt for generic interrupt client diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt index cffa1907463a..79d90f060327 100644 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt @@ -6,7 +6,6 @@ Required properties: - compatible: must be "atlas,ph-sm" - reg: the I2C address of the sensor - - interrupt-parent: should be the phandle for the interrupt controller - interrupts: the sole interrupt generated by the device Refer to interrupt-controller/interrupts.txt for generic interrupt client diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt index b0d3b59966bc..233fe207aded 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt +++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt @@ -5,7 +5,6 @@ Required properties: - reg : the I2C address of the sensor Optional properties: - - interrupt-parent : should be the phandle for the interrupt controller - interrupts : interrupt mapping for the trigger interrupt from the internal oscillator. The following IRQ modes are supported: IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH and diff --git a/Documentation/devicetree/bindings/iio/health/afe4403.txt b/Documentation/devicetree/bindings/iio/health/afe4403.txt index 2fffd70336ba..8e412054d6d5 100644 --- a/Documentation/devicetree/bindings/iio/health/afe4403.txt +++ b/Documentation/devicetree/bindings/iio/health/afe4403.txt @@ -4,7 +4,6 @@ Required properties: - compatible : Should be "ti,afe4403". - reg : SPI chip select address of device. - tx-supply : Regulator supply to transmitting LEDs. - - interrupt-parent : Phandle to he parent interrupt controller. - interrupts : The interrupt line the device ADC_RDY pin is connected to. For details refer to, ../../interrupt-controller/interrupts.txt. diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt index de69f203edfa..0b52830a0d9c 100644 --- a/Documentation/devicetree/bindings/iio/health/afe4404.txt +++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt @@ -4,7 +4,6 @@ Required properties: - compatible : Should be "ti,afe4404". - reg : I2C address of the device. - tx-supply : Regulator supply to transmitting LEDs. - - interrupt-parent : Phandle to he parent interrupt controller. - interrupts : The interrupt line the device ADC_RDY pin is connected to. For details refer to, ../interrupt-controller/interrupts.txt. diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt index 8d8176459d09..0054908a6e74 100644 --- a/Documentation/devicetree/bindings/iio/health/max30100.txt +++ b/Documentation/devicetree/bindings/iio/health/max30100.txt @@ -5,7 +5,6 @@ Maxim MAX30100 heart rate and pulse oximeter sensor Required properties: - compatible: must be "maxim,max30100" - reg: the I2C address of the sensor - - interrupt-parent: should be the phandle for the interrupt controller - interrupts: the sole interrupt generated by the device Refer to interrupt-controller/interrupts.txt for generic diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt index ef2ca0a0306f..7ef7ae40ae4f 100644 --- a/Documentation/devicetree/bindings/iio/health/max30102.txt +++ b/Documentation/devicetree/bindings/iio/health/max30102.txt @@ -7,7 +7,6 @@ Maxim MAX30105 optical particle-sensing module Required properties: - compatible: must be "maxim,max30102" or "maxim,max30105" - reg: the I2C address of the sensor - - interrupt-parent: should be the phandle for the interrupt controller - interrupts: the sole interrupt generated by the device Refer to interrupt-controller/interrupts.txt for generic diff --git a/Documentation/devicetree/bindings/iio/humidity/hts221.txt b/Documentation/devicetree/bindings/iio/humidity/hts221.txt index 10adeb0d703d..84d029372260 100644 --- a/Documentation/devicetree/bindings/iio/humidity/hts221.txt +++ b/Documentation/devicetree/bindings/iio/humidity/hts221.txt @@ -13,7 +13,6 @@ Optional properties: when it is not active, whereas a pull-up one is needed when interrupt line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. Refer to pinctrl/pinctrl-bindings.txt for the property description. -- interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt index ae0112c7debc..0c1c105fb503 100644 --- a/Documentation/devicetree/bindings/iio/imu/bmi160.txt +++ b/Documentation/devicetree/bindings/iio/imu/bmi160.txt @@ -9,7 +9,6 @@ Required properties: - spi-max-frequency : set maximum clock frequency (only for SPI) Optional properties: - - interrupt-parent : should be the phandle of the interrupt controller - interrupts : interrupt mapping for IRQ, must be IRQ_TYPE_LEVEL_LOW - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt input, set to "INT2" if INT2 pin should be used instead diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt index 5f4777e8cc9e..d33c19d68de3 100644 --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt @@ -11,7 +11,6 @@ Required properties: "invensense,mpu9255" "invensense,icm20608" - reg : the I2C address of the sensor - - interrupt-parent : should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index ef8a8566c63f..ea2d6e0ae4c5 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -20,7 +20,6 @@ Optional properties: IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line when it is not active, whereas a pull-up one is needed when interrupt line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. -- interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt index d6f66c73ddbf..aa199e09a493 100644 --- a/Documentation/devicetree/bindings/iio/light/apds9300.txt +++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt @@ -9,7 +9,6 @@ Required properties: Optional properties: - - interrupt-parent : should be the phandle for the interrupt controller - interrupts : interrupt mapping for GPIO IRQ Example: diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt index 174b709f16db..3af325ad194b 100644 --- a/Documentation/devicetree/bindings/iio/light/apds9960.txt +++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt @@ -6,7 +6,6 @@ Required properties: - compatible: must be "avago,apds9960" - reg: the I2c address of the sensor - - interrupt-parent: should be the phandle for the interrupt controller - interrupts : the sole interrupt generated by the device Refer to interrupt-controller/interrupts.txt for generic interrupt client diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.txt b/Documentation/devicetree/bindings/iio/light/isl29018.txt index 425ab459e209..b9bbde3e13ed 100644 --- a/Documentation/devicetree/bindings/iio/light/isl29018.txt +++ b/Documentation/devicetree/bindings/iio/light/isl29018.txt @@ -10,7 +10,6 @@ Required properties: Optional properties: - - interrupt-parent: should be the phandle for the interrupt controller - interrupts: the sole interrupt generated by the device Refer to interrupt-controller/interrupts.txt for generic interrupt client diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt index eac30d508849..47b13eb8f4ec 100644 --- a/Documentation/devicetree/bindings/iio/light/opt3001.txt +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt @@ -13,7 +13,6 @@ Required properties: - reg: the I2C address of the sensor Optional properties: - - interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge) Example: diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.txt b/Documentation/devicetree/bindings/iio/light/tsl2583.txt index 8e2066c83f70..059dffa1829a 100644 --- a/Documentation/devicetree/bindings/iio/light/tsl2583.txt +++ b/Documentation/devicetree/bindings/iio/light/tsl2583.txt @@ -10,7 +10,6 @@ Required properties: Optional properties: - - interrupt-parent: should be the phandle for the interrupt controller - interrupts: the sole interrupt generated by the device Refer to interrupt-controller/interrupts.txt for generic interrupt client diff --git a/Documentation/devicetree/bindings/iio/light/uvis25.txt b/Documentation/devicetree/bindings/iio/light/uvis25.txt index 3041207e3f3c..043c139d91e6 100644 --- a/Documentation/devicetree/bindings/iio/light/uvis25.txt +++ b/Documentation/devicetree/bindings/iio/light/uvis25.txt @@ -5,7 +5,6 @@ Required properties: - reg: i2c address of the sensor / spi cs line Optional properties: -- interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt index 9f263b7df162..fd5fca90fb39 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt @@ -9,7 +9,6 @@ Required properties: Optional properties: - - interrupt-parent : phandle to the parent interrupt controller - interrupts : interrupt mapping for GPIO IRQ Example: diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt index c7198a03c906..5498b0688b6f 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt @@ -12,7 +12,6 @@ Optional properties: - temp-measurement-period: temperature measurement period (milliseconds) - default-oversampling: default oversampling value to be used at startup, value range is 0-3 with rising sensitivity. -- interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ - reset-gpios: a GPIO line handling reset of the sensor: as the line is active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt) diff --git a/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt index fb85de676e03..a36ab3e0c3f7 100644 --- a/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt +++ b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt @@ -15,8 +15,6 @@ Optional properties: power to the sensor - vdd-supply: an optional regulator that needs to be on to provide VDD power to the sensor -- interrupt-parent: phandle to the parent interrupt controller as documented in - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupts: interrupt mapping for IRQ as documented in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt index b6c1afa6f02d..849115585d55 100644 --- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt @@ -6,7 +6,6 @@ Required properties: - spi-max-frequency: specifies maximum SPI clock frequency - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI slave node bindings. - - interrupt-parent : should be the phandle for the interrupt controller - interrupts : the sole interrupt generated by the device Refer to interrupt-controller/interrupts.txt for generic diff --git a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt index b301dd2b35da..c54455db3bec 100644 --- a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt +++ b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt @@ -3,7 +3,6 @@ Semtech's SX9500 capacitive proximity button device driver Required properties: - compatible: must be "semtech,sx9500" - reg: i2c address where to find the device - - interrupt-parent : should be the phandle for the interrupt controller - interrupts : the sole interrupt generated by the device Refer to interrupt-controller/interrupts.txt for generic diff --git a/Documentation/devicetree/bindings/iio/sensorhub.txt b/Documentation/devicetree/bindings/iio/sensorhub.txt index 8d57571d5c0b..b6ac0457d4ea 100644 --- a/Documentation/devicetree/bindings/iio/sensorhub.txt +++ b/Documentation/devicetree/bindings/iio/sensorhub.txt @@ -6,7 +6,6 @@ of a virtual sensor device. Required properties: - compatible: "samsung,sensorhub-rinato" or "samsung,sensorhub-thermostat" - spi-max-frequency: max SPI clock frequency -- interrupt-parent: interrupt parent - interrupts: communication interrupt - ap-mcu-gpios: [out] ap to sensorhub line - used during communication - mcu-ap-gpios: [in] sensorhub to ap - used during communication diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt index b63aba91ef03..da0af234a357 100644 --- a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt +++ b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt @@ -20,8 +20,6 @@ Required properties: Optional properties: - - interrupt-parent: should be the phandle for the interrupt controller - - interrupts: interrupt mapping for GPIO IRQ (level active low) Example: |