1 files changed, 0 insertions, 46 deletions
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
deleted file mode 100644
index e7853143fa42..000000000000
--- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers.
-
-These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
-are the only ones which don't need a pinctrl driver.
-BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
-and/or written, and the direction changed from input to output.
-BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
-and/or written, and the direction changed from input to output.
-
-Required properties:
-	- compatible: should be "brcm,bcm6345-gpio"
-	- reg-names: must contain
-		"dat" - data register
-		"dirout" - direction (output) register
-	- reg: address + size pairs describing the GPIO register sets;
-		order must correspond with the order of entries in reg-names
-	- #gpio-cells: must be set to 2. The first cell is the pin number and
-			the second cell is used to specify the gpio polarity:
-			0 = active high
-			1 = active low
-	- gpio-controller: Marks the device node as a gpio controller.
-
-Optional properties:
-	- native-endian: use native endian memory.
-
-Examples:
-	- BCM6338:
-	gpio: gpio-controller@fffe0407 {
-		compatible = "brcm,bcm6345-gpio";
-		reg-names = "dirout", "dat";
-		reg = <0xfffe0407 1>, <0xfffe040f 1>;
-
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	- BCM6345:
-	gpio: gpio-controller@fffe0406 {
-		compatible = "brcm,bcm6345-gpio";
-		reg-names = "dirout", "dat";
-		reg = <0xfffe0406 2>, <0xfffe040a 2>;
-		native-endian;
-
-		#gpio-cells = <2>;
-		gpio-controller;
-	};