diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt')
-rw-r--r-- | Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt | 56 |
1 files changed, 0 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt deleted file mode 100644 index 26f237f641b7..000000000000 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt +++ /dev/null @@ -1,56 +0,0 @@ -NVIDIA Tegra210 Clock And Reset Controller - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -The CAR (Clock And Reset) Controller on Tegra is the HW module responsible -for muxing and gating Tegra's clocks, and setting their rates. - -Required properties : -- compatible : Should be "nvidia,tegra210-car" -- reg : Should contain CAR registers location and length -- clocks : Should contain phandle and clock specifiers for two clocks: - the 32 KHz "32k_in". -- #clock-cells : Should be 1. - In clock consumers, this cell represents the clock ID exposed by the - CAR. The assignments may be found in header file - <dt-bindings/clock/tegra210-car.h>. -- #reset-cells : Should be 1. - In clock consumers, this cell represents the bit number in the CAR's - array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. - -Example SoC include file: - -/ { - tegra_car: clock { - compatible = "nvidia,tegra210-car"; - reg = <0x60006000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - usb@c5004000 { - clocks = <&tegra_car TEGRA210_CLK_USB2>; - }; -}; - -Example board file: - -/ { - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk_32k: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - &tegra_car { - clocks = <&clk_32k>; - }; -}; |