diff options
| -rw-r--r-- | Documentation/driver-api/sgi-ioc4.rst | 49 | ||||
| -rw-r--r-- | arch/ia64/configs/generic_defconfig | 1 | ||||
| -rw-r--r-- | arch/ia64/configs/gensparse_defconfig | 1 | ||||
| -rw-r--r-- | arch/mips/configs/bigsur_defconfig | 1 | ||||
| -rw-r--r-- | arch/mips/configs/ip32_defconfig | 1 | ||||
| -rw-r--r-- | arch/mips/configs/markeins_defconfig | 1 | ||||
| -rw-r--r-- | arch/mips/configs/rm200_defconfig | 1 | ||||
| -rw-r--r-- | arch/mips/configs/sb1250_swarm_defconfig | 1 | ||||
| -rw-r--r-- | drivers/misc/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/misc/ioc4.c | 498 | ||||
| -rw-r--r-- | include/linux/ioc4.h | 184 | ||||
| -rw-r--r-- | include/linux/pci_ids.h | 1 |
13 files changed, 0 insertions, 752 deletions
diff --git a/Documentation/driver-api/sgi-ioc4.rst b/Documentation/driver-api/sgi-ioc4.rst deleted file mode 100644 index 72709222d3c0..000000000000 --- a/Documentation/driver-api/sgi-ioc4.rst +++ /dev/null @@ -1,49 +0,0 @@ -==================================== -SGI IOC4 PCI (multi function) device -==================================== - -The SGI IOC4 PCI device is a bit of a strange beast, so some notes on -it are in order. - -First, even though the IOC4 performs multiple functions, such as an -IDE controller, a serial controller, a PS/2 keyboard/mouse controller, -and an external interrupt mechanism, it's not implemented as a -multifunction device. The consequence of this from a software -standpoint is that all these functions share a single IRQ, and -they can't all register to own the same PCI device ID. To make -matters a bit worse, some of the register blocks (and even registers -themselves) present in IOC4 are mixed-purpose between these several -functions, meaning that there's no clear "owning" device driver. - -The solution is to organize the IOC4 driver into several independent -drivers, "ioc4", "sgiioc4", and "ioc4_serial". Note that there is no -PS/2 controller driver as this functionality has never been wired up -on a shipping IO card. - -ioc4 -==== -This is the core (or shim) driver for IOC4. It is responsible for -initializing the basic functionality of the chip, and allocating -the PCI resources that are shared between the IOC4 functions. - -This driver also provides registration functions that the other -IOC4 drivers can call to make their presence known. Each driver -needs to provide a probe and remove function, which are invoked -by the core driver at appropriate times. The interface of these -IOC4 function probe and remove operations isn't precisely the same -as PCI device probe and remove operations, but is logically the -same operation. - -sgiioc4 -======= -This is the IDE driver for IOC4. Its name isn't very descriptive -simply for historical reasons (it used to be the only IOC4 driver -component). There's not much to say about it other than it hooks -up to the ioc4 driver via the appropriate registration, probe, and -remove functions. - -ioc4_serial -=========== -This is the serial driver for IOC4. There's not much to say about it -other than it hooks up to the ioc4 driver via the appropriate registration, -probe, and remove functions. diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 8dd921dce4b5..661d90b3e148 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -44,7 +44,6 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y -CONFIG_SGI_IOC4=y CONFIG_SGI_XP=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 5d5ea744f7e6..7844e6a956a4 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -36,7 +36,6 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y -CONFIG_SGI_IOC4=y CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_IDE_GENERIC=y diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 66566026409d..f14ad0538f4e 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -103,7 +103,6 @@ CONFIG_FW_LOADER=m CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m -CONFIG_SGI_IOC4=m CONFIG_EEPROM_LEGACY=y CONFIG_EEPROM_MAX6875=y CONFIG_IDE=y diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index 572cab91670c..370884018aad 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -46,7 +46,6 @@ CONFIG_CONNECTOR=y CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m -CONFIG_SGI_IOC4=y CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig index ae93a94f8c71..507ad91b21e7 100644 --- a/arch/mips/configs/markeins_defconfig +++ b/arch/mips/configs/markeins_defconfig @@ -117,7 +117,6 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_SGI_IOC4=m CONFIG_SCSI=m # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=m diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 0f4b09f8a0ee..8762e75f5d5f 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -198,7 +198,6 @@ CONFIG_BLK_DEV_SX8=m CONFIG_BLK_DEV_RAM=m CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m -CONFIG_SGI_IOC4=m CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y diff --git a/arch/mips/configs/sb1250_swarm_defconfig b/arch/mips/configs/sb1250_swarm_defconfig index 6883ea4477d4..bb0b1b22ebe1 100644 --- a/arch/mips/configs/sb1250_swarm_defconfig +++ b/arch/mips/configs/sb1250_swarm_defconfig @@ -49,7 +49,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=9220 CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m -CONFIG_SGI_IOC4=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=y diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 299032693934..423d2d26d8f7 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -126,18 +126,6 @@ config INTEL_MID_PTI an Intel Atom (non-netbook) mobile device containing a MIPI P1149.7 standard implementation. -config SGI_IOC4 - tristate "SGI IOC4 Base IO support" - depends on PCI - ---help--- - This option enables basic support for the IOC4 chip on certain - SGI IO controller cards (IO9, IO10, and PCI-RT). This option - does not enable any specific functions on such a card, but provides - necessary infrastructure for other drivers to utilize. - - If you have an SGI Altix with an IOC4-based card say Y. - Otherwise say N. - config TIFM_CORE tristate "TI Flash Media interface support" depends on PCI diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index abd8ae249746..8dae0a976200 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -21,7 +21,6 @@ obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o -obj-$(CONFIG_SGI_IOC4) += ioc4.o obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ diff --git a/drivers/misc/ioc4.c b/drivers/misc/ioc4.c deleted file mode 100644 index 9d0445a567db..000000000000 --- a/drivers/misc/ioc4.c +++ /dev/null @@ -1,498 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005-2006 Silicon Graphics, Inc. All Rights Reserved. - */ - -/* This file contains the master driver module for use by SGI IOC4 subdrivers. - * - * It allocates any resources shared between multiple subdevices, and - * provides accessor functions (where needed) and the like for those - * resources. It also provides a mechanism for the subdevice modules - * to support loading and unloading. - * - * Non-shared resources (e.g. external interrupt A_INT_OUT register page - * alias, serial port and UART registers) are handled by the subdevice - * modules themselves. - * - * This is all necessary because IOC4 is not implemented as a multi-function - * PCI device, but an amalgamation of disparate registers for several - * types of device (ATA, serial, external interrupts). The normal - * resource management in the kernel doesn't have quite the right interfaces - * to handle this situation (e.g. multiple modules can't claim the same - * PCI ID), thus this IOC4 master module. - */ - -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/ioc4.h> -#include <linux/ktime.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <linux/time.h> -#include <asm/io.h> - -/*************** - * Definitions * - ***************/ - -/* Tweakable values */ - -/* PCI bus speed detection/calibration */ -#define IOC4_CALIBRATE_COUNT 63 /* Calibration cycle period */ -#define IOC4_CALIBRATE_CYCLES 256 /* Average over this many cycles */ -#define IOC4_CALIBRATE_DISCARD 2 /* Discard first few cycles */ -#define IOC4_CALIBRATE_LOW_MHZ 25 /* Lower bound on bus speed sanity */ -#define IOC4_CALIBRATE_HIGH_MHZ 75 /* Upper bound on bus speed sanity */ -#define IOC4_CALIBRATE_DEFAULT_MHZ 66 /* Assumed if sanity check fails */ - -/************************ - * Submodule management * - ************************/ - -static DEFINE_MUTEX(ioc4_mutex); - -static LIST_HEAD(ioc4_devices); -static LIST_HEAD(ioc4_submodules); - -/* Register an IOC4 submodule */ -int -ioc4_register_submodule(struct ioc4_submodule *is) -{ - struct ioc4_driver_data *idd; - - mutex_lock(&ioc4_mutex); - list_add(&is->is_list, &ioc4_submodules); - - /* Initialize submodule for each IOC4 */ - if (!is->is_probe) - goto out; - - list_for_each_entry(idd, &ioc4_devices, idd_list) { - if (is->is_probe(idd)) { - printk(KERN_WARNING - "%s: IOC4 submodule %s probe failed " - "for pci_dev %s", - __func__, module_name(is->is_owner), - pci_name(idd->idd_pdev)); - } - } - out: - mutex_unlock(&ioc4_mutex); - return 0; -} - -/* Unregister an IOC4 submodule */ -void -ioc4_unregister_submodule(struct ioc4_submodule *is) -{ - struct ioc4_driver_data *idd; - - mutex_lock(&ioc4_mutex); - list_del(&is->is_list); - - /* Remove submodule for each IOC4 */ - if (!is->is_remove) - goto out; - - list_for_each_entry(idd, &ioc4_devices, idd_list) { - if (is->is_remove(idd)) { - printk(KERN_WARNING - "%s: IOC4 submodule %s remove failed " - "for pci_dev %s.\n", - __func__, module_name(is->is_owner), - pci_name(idd->idd_pdev)); - } - } - out: - mutex_unlock(&ioc4_mutex); -} - -/********************* - * Device management * - *********************/ - -#define IOC4_CALIBRATE_LOW_LIMIT \ - (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_LOW_MHZ) -#define IOC4_CALIBRATE_HIGH_LIMIT \ - (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_HIGH_MHZ) -#define IOC4_CALIBRATE_DEFAULT \ - (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_DEFAULT_MHZ) - -#define IOC4_CALIBRATE_END \ - (IOC4_CALIBRATE_CYCLES + IOC4_CALIBRATE_DISCARD) - -#define IOC4_INT_OUT_MODE_TOGGLE 0x7 /* Toggle INT_OUT every COUNT+1 ticks */ - -/* Determines external interrupt output clock period of the PCI bus an - * IOC4 is attached to. This value can be used to determine the PCI - * bus speed. - * - * IOC4 has a design feature that various internal timers are derived from - * the PCI bus clock. This causes IOC4 device drivers to need to take the - * bus speed into account when setting various register values (e.g. INT_OUT - * register COUNT field, UART divisors, etc). Since this information is - * needed by several subdrivers, it is determined by the main IOC4 driver, - * even though the following code utilizes external interrupt registers - * to perform the speed calculation. - */ -static void -ioc4_clock_calibrate(struct ioc4_driver_data *idd) -{ - union ioc4_int_out int_out; - union ioc4_gpcr gpcr; - unsigned int state, last_state; - uint64_t start, end, period; - unsigned int count; - - /* Enable output */ - gpcr.raw = 0; - gpcr.fields.dir = IOC4_GPCR_DIR_0; - gpcr.fields.int_out_en = 1; - writel(gpcr.raw, &idd->idd_misc_regs->gpcr_s.raw); - - /* Reset to power-on state */ - writel(0, &idd->idd_misc_regs->int_out.raw); - - /* Set up square wave */ - int_out.raw = 0; - int_out.fields.count = IOC4_CALIBRATE_COUNT; - int_out.fields.mode = IOC4_INT_OUT_MODE_TOGGLE; - int_out.fields.diag = 0; - writel(int_out.raw, &idd->idd_misc_regs->int_out.raw); - - /* Check square wave period averaged over some number of cycles */ - start = ktime_get_ns(); - state = 1; /* make sure the first read isn't a rising edge */ - for (count = 0; count <= IOC4_CALIBRATE_END; count++) { - do { /* wait for a rising edge */ - last_state = state; - int_out.raw = readl(&idd->idd_misc_regs->int_out.raw); - state = int_out.fields.int_out; - } while (last_state || !state); - - /* discard the first few cycles */ - if (count == IOC4_CALIBRATE_DISCARD) - start = ktime_get_ns(); - } - end = ktime_get_ns(); - - /* Calculation rearranged to preserve intermediate precision. - * Logically: - * 1. "end - start" gives us the measurement period over all - * the square wave cycles. - * 2. Divide by number of square wave cycles to get the period - * of a square wave cycle. - * 3. Divide by 2*(int_out.fields.count+1), which is the formula - * by which the IOC4 generates the square wave, to get the - * period of an IOC4 INT_OUT count. - */ - period = (end - start) / - (IOC4_CALIBRATE_CYCLES * 2 * (IOC4_CALIBRATE_COUNT + 1)); - - /* Bounds check the result. */ - if (period > IOC4_CALIBRATE_LOW_LIMIT || - period < IOC4_CALIBRATE_HIGH_LIMIT) { - printk(KERN_INFO - "IOC4 %s: Clock calibration failed. Assuming" - "PCI clock is %d ns.\n", - pci_name(idd->idd_pdev), - IOC4_CALIBRATE_DEFAULT / IOC4_EXTINT_COUNT_DIVISOR); - period = IOC4_CALIBRATE_DEFAULT; - } else { - u64 ns = period; - - do_div(ns, IOC4_EXTINT_COUNT_DIVISOR); - printk(KERN_DEBUG - "IOC4 %s: PCI clock is %llu ns.\n", - pci_name(idd->idd_pdev), (unsigned long long)ns); - } - - /* Remember results. We store the extint clock period rather - * than the PCI clock period so that greater precision is - * retained. Divide by IOC4_EXTINT_COUNT_DIVISOR to get - * PCI clock period. - */ - idd->count_period = period; -} - -/* There are three variants of IOC4 cards: IO9, IO10, and PCI-RT. - * Each brings out different combinations of IOC4 signals, thus. - * the IOC4 subdrivers need to know to which we're attached. - * - * We look for the presence of a SCSI (IO9) or SATA (IO10) controller - * on the same PCI bus at slot number 3 to differentiate IO9 from IO10. - * If neither is present, it's a PCI-RT. - */ -static unsigned int -ioc4_variant(struct ioc4_driver_data *idd) -{ - struct pci_dev *pdev = NULL; - int found = 0; - - /* IO9: Look for a QLogic ISP 12160 at the same bus and slot 3. */ - do { - pdev = pci_get_device(PCI_VENDOR_ID_QLOGIC, - PCI_DEVICE_ID_QLOGIC_ISP12160, pdev); - if (pdev && - idd->idd_pdev->bus->number == pdev->bus->number && - 3 == PCI_SLOT(pdev->devfn)) - found = 1; - } while (pdev && !found); - if (NULL != pdev) { - pci_dev_put(pdev); - return IOC4_VARIANT_IO9; - } - - /* IO10: Look for a Vitesse VSC 7174 at the same bus and slot 3. */ - pdev = NULL; - do { - pdev = pci_get_device(PCI_VENDOR_ID_VITESSE, - PCI_DEVICE_ID_VITESSE_VSC7174, pdev); - if (pdev && - idd->idd_pdev->bus->number == pdev->bus->number && - 3 == PCI_SLOT(pdev->devfn)) - found = 1; - } while (pdev && !found); - if (NULL != pdev) { - pci_dev_put(pdev); - return IOC4_VARIANT_IO10; - } - - /* PCI-RT: No SCSI/SATA controller will be present */ - return IOC4_VARIANT_PCI_RT; -} - -static void -ioc4_load_modules(struct work_struct *work) -{ - request_module("sgiioc4"); -} - -static DECLARE_WORK(ioc4_load_modules_work, ioc4_load_modules); - -/* Adds a new instance of an IOC4 card */ -static int -ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) -{ - struct ioc4_driver_data *idd; - struct ioc4_submodule *is; - uint32_t pcmd; - int ret; - - /* Enable IOC4 and take ownership of it */ - if ((ret = pci_enable_device(pdev))) { - printk(KERN_WARNING - "%s: Failed to enable IOC4 device for pci_dev %s.\n", - __func__, pci_name(pdev)); - goto out; - } - pci_set_master(pdev); - - /* Set up per-IOC4 data */ - idd = kmalloc(sizeof(struct ioc4_driver_data), GFP_KERNEL); - if (!idd) { - printk(KERN_WARNING - "%s: Failed to allocate IOC4 data for pci_dev %s.\n", - __func__, pci_name(pdev)); - ret = -ENODEV; - goto out_idd; - } - idd->idd_pdev = pdev; - idd->idd_pci_id = pci_id; - - /* Map IOC4 misc registers. These are shared between subdevices - * so the main IOC4 module manages them. - */ - idd->idd_bar0 = pci_resource_start(idd->idd_pdev, 0); - if (!idd->idd_bar0) { - printk(KERN_WARNING - "%s: Unable to find IOC4 misc resource " - "for pci_dev %s.\n", - __func__, pci_name(idd->idd_pdev)); - ret = -ENODEV; - goto out_pci; - } - if (!request_mem_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs), - "ioc4_misc")) { - printk(KERN_WARNING - "%s: Unable to request IOC4 misc region " - "for pci_dev %s.\n", - __func__, pci_name(idd->idd_pdev)); - ret = -ENODEV; - goto out_pci; - } - idd->idd_misc_regs = ioremap(idd->idd_bar0, - sizeof(struct ioc4_misc_regs)); - if (!idd->idd_misc_regs) { - printk(KERN_WARNING - "%s: Unable to remap IOC4 misc region " - "for pci_dev %s.\n", - __func__, pci_name(idd->idd_pdev)); - ret = -ENODEV; - goto out_misc_region; - } - - /* Failsafe portion of per-IOC4 initialization */ - - /* Detect card variant */ - idd->idd_variant = ioc4_variant(idd); - printk(KERN_INFO "IOC4 %s: %s card detected.\n", pci_name(pdev), - idd->idd_variant == IOC4_VARIANT_IO9 ? "IO9" : - idd->idd_variant == IOC4_VARIANT_PCI_RT ? "PCI-RT" : - idd->idd_variant == IOC4_VARIANT_IO10 ? "IO10" : "unknown"); - - /* Initialize IOC4 */ - pci_read_config_dword(idd->idd_pdev, PCI_COMMAND, &pcmd); - pci_write_config_dword(idd->idd_pdev, PCI_COMMAND, - pcmd | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); - - /* Determine PCI clock */ - ioc4_clock_calibrate(idd); - - /* Disable/clear all interrupts. Need to do this here lest - * one submodule request the shared IOC4 IRQ, but interrupt - * is generated by a different subdevice. - */ - /* Disable */ - writel(~0, &idd->idd_misc_regs->other_iec.raw); - writel(~0, &idd->idd_misc_regs->sio_iec); - /* Clear (i.e. acknowledge) */ - writel(~0, &idd->idd_misc_regs->other_ir.raw); - writel(~0, &idd->idd_misc_regs->sio_ir); - - /* Track PCI-device specific data */ - idd->idd_serial_data = NULL; - pci_set_drvdata(idd->idd_pdev, idd); - - mutex_lock(&ioc4_mutex); - list_add_tail(&idd->idd_list, &ioc4_devices); - - /* Add this IOC4 to all submodules */ - list_for_each_entry(is, &ioc4_submodules, is_list) { - if (is->is_probe && is->is_probe(idd)) { - printk(KERN_WARNING - "%s: IOC4 submodule 0x%s probe failed " - "for pci_dev %s.\n", - __func__, module_name(is->is_owner), - pci_name(idd->idd_pdev)); - } - } - mutex_unlock(&ioc4_mutex); - - /* Request sgiioc4 IDE driver on boards that bring that functionality - * off of IOC4. The root filesystem may be hosted on a drive connected - * to IOC4, so we need to make sure the sgiioc4 driver is loaded as it - * won't be picked up by modprobes due to the ioc4 module owning the - * PCI device. - */ - if (idd->idd_variant != IOC4_VARIANT_PCI_RT) { - /* Request the module from a work procedure as the modprobe - * goes out to a userland helper and that will hang if done - * directly from ioc4_probe(). - */ - printk(KERN_INFO "IOC4 loading sgiioc4 submodule\n"); - schedule_work(&ioc4_load_modules_work); - } - - return 0; - -out_misc_region: - release_mem_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs)); -out_pci: - kfree(idd); -out_idd: - pci_disable_device(pdev); -out: - return ret; -} - -/* Removes a particular instance of an IOC4 card. */ -static void -ioc4_remove(struct pci_dev *pdev) -{ - struct ioc4_submodule *is; - struct ioc4_driver_data *idd; - - idd = pci_get_drvdata(pdev); - - /* Remove this IOC4 from all submodules */ - mutex_lock(&ioc4_mutex); - list_for_each_entry(is, &ioc4_submodules, is_list) { - if (is->is_remove && is->is_remove(idd)) { - printk(KERN_WARNING - "%s: IOC4 submodule 0x%s remove failed " - "for pci_dev %s.\n", - __func__, module_name(is->is_owner), - pci_name(idd->idd_pdev)); - } - } - mutex_unlock(&ioc4_mutex); - - /* Release resources */ - iounmap(idd->idd_misc_regs); - if (!idd->idd_bar0) { - printk(KERN_WARNING - "%s: Unable to get IOC4 misc mapping for pci_dev %s. " - "Device removal may be incomplete.\n", - __func__, pci_name(idd->idd_pdev)); - } - release_mem_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs)); - - /* Disable IOC4 and relinquish */ - pci_disable_device(pdev); - - /* Remove and free driver data */ - mutex_lock(&ioc4_mutex); - list_del(&idd->idd_list); - mutex_unlock(&ioc4_mutex); - kfree(idd); -} - -static const struct pci_device_id ioc4_id_table[] = { - {PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC4, PCI_ANY_ID, - PCI_ANY_ID, 0x0b4000, 0xFFFFFF}, - {0} -}; - -static struct pci_driver ioc4_driver = { - .name = "IOC4", - .id_table = ioc4_id_table, - .probe = ioc4_probe, - .remove = ioc4_remove, -}; - -MODULE_DEVICE_TABLE(pci, ioc4_id_table); - -/********************* - * Module management * - *********************/ - -/* Module load */ -static int __init -ioc4_init(void) -{ - return pci_register_driver(&ioc4_driver); -} - -/* Module unload */ -static void __exit -ioc4_exit(void) -{ - /* Ensure ioc4_load_modules() has completed before exiting */ - flush_work(&ioc4_load_modules_work); - pci_unregister_driver(&ioc4_driver); -} - -module_init(ioc4_init); -module_exit(ioc4_exit); - -MODULE_AUTHOR("Brent Casavant - Silicon Graphics, Inc. <bcasavan@sgi.com>"); -MODULE_DESCRIPTION("PCI driver master module for SGI IOC4 Base-IO Card"); -MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(ioc4_register_submodule); -EXPORT_SYMBOL(ioc4_unregister_submodule); diff --git a/include/linux/ioc4.h b/include/linux/ioc4.h deleted file mode 100644 index 51e2b9fb6372..000000000000 --- a/include/linux/ioc4.h +++ /dev/null @@ -1,184 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2005 Silicon Graphics, Inc. All Rights Reserved. - */ - -#ifndef _LINUX_IOC4_H -#define _LINUX_IOC4_H - -#include <linux/interrupt.h> - -/*************** - * Definitions * - ***************/ - -/* Miscellaneous values inherent to hardware */ - -#define IOC4_EXTINT_COUNT_DIVISOR 520 /* PCI clocks per COUNT tick */ - -/*********************************** - * Structures needed by subdrivers * - ***********************************/ - -/* This structure fully describes the IOC4 miscellaneous registers which - * appear at bar[0]+0x00000 through bar[0]+0x0005c. The corresponding - * PCI resource is managed by the main IOC4 driver because it contains - * registers of interest to many different IOC4 subdrivers. - */ -struct ioc4_misc_regs { - /* Miscellaneous IOC4 registers */ - union ioc4_pci_err_addr_l { - uint32_t raw; - struct { - uint32_t valid:1; /* Address captured */ - uint32_t master_id:4; /* Unit causing error - * 0/1: Serial port 0 TX/RX - * 2/3: Serial port 1 TX/RX - * 4/5: Serial port 2 TX/RX - * 6/7: Serial port 3 TX/RX - * 8: ATA/ATAPI - * 9-15: Undefined - */ - uint32_t mul_err:1; /* Multiple errors occurred */ - uint32_t addr:26; /* Bits 31-6 of error addr */ - } fields; - } pci_err_addr_l; - uint32_t pci_err_addr_h; /* Bits 63-32 of error addr */ - union ioc4_sio_int { - uint32_t raw; - struct { - uint8_t tx_mt:1; /* TX ring buffer empty */ - uint8_t rx_full:1; /* RX ring buffer full */ - uint8_t rx_high:1; /* RX high-water exceeded */ - uint8_t rx_timer:1; /* RX timer has triggered */ - uint8_t delta_dcd:1; /* DELTA_DCD seen */ - uint8_t delta_cts:1; /* DELTA_CTS seen */ - uint8_t intr_pass:1; /* Interrupt pass-through */ - uint8_t tx_explicit:1; /* TX, MCW, or delay complete */ - } fields[4]; - } sio_ir; /* Serial interrupt state */ - union ioc4_other_int { - uint32_t raw; - struct { - uint32_t ata_int:1; /* ATA port passthru */ - uint32_t ata_memerr:1; /* ATA halted by mem error */ - uint32_t memerr:4; /* Serial halted by mem err */ - uint32_t kbd_int:1; /* kbd/mouse intr asserted */ - uint32_t reserved:16; /* zero */ - uint32_t rt_int:1; /* INT_OUT section latch */ - uint32_t gen_int:8; /* Intr. from generic pins */ - } fields; - } other_ir; /* Other interrupt state */ - union ioc4_sio_int sio_ies; /* Serial interrupt enable set */ - union ioc4_other_int other_ies; /* Other interrupt enable set */ - union ioc4_sio_int sio_iec; /* Serial interrupt enable clear */ - union ioc4_other_int other_iec; /* Other interrupt enable clear */ - union ioc4_sio_cr { - uint32_t raw; - struct { - uint32_t cmd_pulse:4; /* Bytebus strobe width */ - uint32_t arb_diag:3; /* PCI bus requester */ - uint32_t sio_diag_idle:1; /* Active ser req? */ - uint32_t ata_diag_idle:1; /* Active ATA req? */ - uint32_t ata_diag_active:1; /* ATA req is winner */ - uint32_t reserved:22; /* zero */ - } fields; - } sio_cr; - uint32_t unused1; - union ioc4_int_out { - uint32_t raw; - struct { - uint32_t count:16; /* Period control */ - uint32_t mode:3; /* Output signal shape */ - uint32_t reserved:11; /* zero */ - uint32_t diag:1; /* Timebase control */ - uint32_t int_out:1; /* Current value */ - } fields; - } int_out; /* External interrupt output control */ - uint32_t unused2; - union ioc4_gpcr { - uint32_t raw; - struct { - uint32_t dir:8; /* Pin direction */ - uint32_t edge:8; /* Edge/level mode */ - uint32_t reserved1:4; /* zero */ - uint32_t int_out_en:1; /* INT_OUT enable */ - uint32_t reserved2:11; /* zero */ - } fields; - } gpcr_s; /* Generic PIO control set */ - union ioc4_gpcr gpcr_c; /* Generic PIO control clear */ - union ioc4_gpdr { - uint32_t raw; - struct { - uint32_t gen_pin:8; /* State of pins */ - uint32_t reserved:24; - } fields; - } gpdr; /* Generic PIO data */ - uint32_t unused3; - union ioc4_gppr { - uint32_t raw; - struct { - uint32_t gen_pin:1; /* Single pin state */ - uint32_t reserved:31; - } fields; - } gppr[8]; /* Generic PIO pins */ -}; - -/* Masks for GPCR DIR pins */ -#define IOC4_GPCR_DIR_0 0x01 /* External interrupt output */ -#define IOC4_GPCR_DIR_1 0x02 /* External interrupt input */ -#define IOC4_GPCR_DIR_2 0x04 -#define IOC4_GPCR_DIR_3 0x08 /* Keyboard/mouse presence */ -#define IOC4_GPCR_DIR_4 0x10 /* Ser. port 0 xcvr select (0=232, 1=422) */ -#define IOC4_GPCR_DIR_5 0x20 /* Ser. port 1 xcvr select (0=232, 1=422) */ -#define IOC4_GPCR_DIR_6 0x40 /* Ser. port 2 xcvr select (0=232, 1=422) */ -#define IOC4_GPCR_DIR_7 0x80 /* Ser. port 3 xcvr select (0=232, 1=422) */ - -/* Masks for GPCR EDGE pins */ -#define IOC4_GPCR_EDGE_0 0x01 -#define IOC4_GPCR_EDGE_1 0x02 /* External interrupt input */ -#define IOC4_GPCR_EDGE_2 0x04 -#define IOC4_GPCR_EDGE_3 0x08 -#define IOC4_GPCR_EDGE_4 0x10 -#define IOC4_GPCR_EDGE_5 0x20 -#define IOC4_GPCR_EDGE_6 0x40 -#define IOC4_GPCR_EDGE_7 0x80 - -#define IOC4_VARIANT_IO9 0x0900 -#define IOC4_VARIANT_PCI_RT 0x0901 -#define IOC4_VARIANT_IO10 0x1000 - -/* One of these per IOC4 */ -struct ioc4_driver_data { - struct list_head idd_list; - unsigned long idd_bar0; - struct pci_dev *idd_pdev; - const struct pci_device_id *idd_pci_id; - struct ioc4_misc_regs __iomem *idd_misc_regs; - unsigned long count_period; - void *idd_serial_data; - unsigned int idd_variant; -}; - -/* One per submodule */ -struct ioc4_submodule { - struct list_head is_list; - char *is_name; - struct module *is_owner; - int (*is_probe) (struct ioc4_driver_data *); - int (*is_remove) (struct ioc4_driver_data *); -}; - -#define IOC4_NUM_CARDS 8 /* max cards per partition */ - -/********************************** - * Functions needed by submodules * - **********************************/ - -extern int ioc4_register_submodule(struct ioc4_submodule *); -extern void ioc4_unregister_submodule(struct ioc4_submodule *); - -#endif /* _LINUX_IOC4_H */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index c842735a4f45..85e2ca611d42 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1070,7 +1070,6 @@ #define PCI_VENDOR_ID_SGI 0x10a9 #define PCI_DEVICE_ID_SGI_IOC3 0x0003 #define PCI_DEVICE_ID_SGI_LITHIUM 0x1002 -#define PCI_DEVICE_ID_SGI_IOC4 0x100a #define PCI_VENDOR_ID_WINBOND 0x10ad #define PCI_DEVICE_ID_WINBOND_82C105 0x0105 |