diff options
-rw-r--r-- | Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 2 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/usb/usbmisc-imx.txt | 1 | ||||
-rw-r--r-- | drivers/usb/chipidea/ci_hdrc_imx.c | 3 | ||||
-rw-r--r-- | drivers/usb/chipidea/ci_hdrc_imx.h | 1 | ||||
-rw-r--r-- | drivers/usb/chipidea/host.c | 3 | ||||
-rw-r--r-- | drivers/usb/chipidea/udc.c | 42 | ||||
-rw-r--r-- | drivers/usb/chipidea/usbmisc_imx.c | 22 |
7 files changed, 45 insertions, 29 deletions
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 341dc67f3472..0e03344e2e8b 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -81,6 +81,8 @@ i.mx specific properties - fsl,usbmisc: phandler of non-core register device, with one argument that indicate usb controller index - disable-over-current: disable over current detect +- over-current-active-high: over current signal polarity is high active, + typically over current signal polarity is low active. - external-vbus-divider: enables off-chip resistor divider for Vbus Example: diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt index 3539d4e7d23e..f1e27faf528e 100644 --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -6,6 +6,7 @@ Required properties: "fsl,imx6q-usbmisc" for imx6q "fsl,vf610-usbmisc" for Vybrid vf610 "fsl,imx6sx-usbmisc" for imx6sx + "fsl,imx7d-usbmisc" for imx7d - reg: Should contain registers location and length Examples: diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index dedc33e589f4..099179457f60 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -140,6 +140,9 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev) if (of_find_property(np, "disable-over-current", NULL)) data->disable_oc = 1; + if (of_find_property(np, "over-current-active-high", NULL)) + data->oc_polarity = 1; + if (of_find_property(np, "external-vbus-divider", NULL)) data->evdo = 1; diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h index 635717e9354a..409aa5ca8dda 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.h +++ b/drivers/usb/chipidea/ci_hdrc_imx.h @@ -17,6 +17,7 @@ struct imx_usbmisc_data { int index; unsigned int disable_oc:1; /* over current detect disabled */ + unsigned int oc_polarity:1; /* over current polarity if oc enabled */ unsigned int evdo:1; /* set external vbus divider option */ }; diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 053bac9d983c..96ae69502c86 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -81,12 +81,15 @@ static int ehci_ci_reset(struct usb_hcd *hcd) { struct device *dev = hcd->self.controller; struct ci_hdrc *ci = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); int ret; ret = ehci_setup(hcd); if (ret) return ret; + ehci->need_io_watchdog = 0; + ci_platform_configure(ci); return ret; diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index b93356834bb5..661f43fe0f9e 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -59,7 +59,7 @@ ctrl_endpt_in_desc = { */ static inline int hw_ep_bit(int num, int dir) { - return num + (dir ? 16 : 0); + return num + ((dir == TX) ? 16 : 0); } static inline int ep_to_bit(struct ci_hdrc *ci, int n) @@ -121,9 +121,8 @@ static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir) */ static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir) { - hw_ep_flush(ci, num, dir); hw_write(ci, OP_ENDPTCTRL + num, - dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); + (dir == TX) ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); return 0; } @@ -139,7 +138,7 @@ static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type) { u32 mask, data; - if (dir) { + if (dir == TX) { mask = ENDPTCTRL_TXT; /* type */ data = type << __ffs(mask); @@ -171,7 +170,7 @@ static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type) */ static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir) { - u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; + u32 mask = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0; } @@ -188,6 +187,9 @@ static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl) { int n = hw_ep_bit(num, dir); + /* Synchronize before ep prime */ + wmb(); + if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; @@ -218,8 +220,8 @@ static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value) do { enum ci_hw_regs reg = OP_ENDPTCTRL + num; - u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; - u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; + u32 mask_xs = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; + u32 mask_xr = (dir == TX) ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; /* data toggle - reserved for EP0 but it's in ESS */ hw_write(ci, reg, mask_xs|mask_xr, @@ -348,8 +350,7 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq, if (node == NULL) return -ENOMEM; - node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC, - &node->dma); + node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC, &node->dma); if (node->ptr == NULL) { kfree(node); return -ENOMEM; @@ -506,8 +507,6 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) hwep->qh.ptr->cap |= mul << __ffs(QH_MULT); } - wmb(); /* synchronize before ep prime */ - ret = hw_ep_prime(ci, hwep->num, hwep->dir, hwep->type == USB_ENDPOINT_XFER_CONTROL); done: @@ -534,9 +533,6 @@ static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep, hwep->qh.ptr->td.token &= cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE)); - /* Synchronize before ep prime */ - wmb(); - return hw_ep_prime(ci, hwep->num, hwep->dir, hwep->type == USB_ENDPOINT_XFER_CONTROL); } @@ -590,7 +586,7 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) } if (remaining_length) { - if (hwep->dir) { + if (hwep->dir == TX) { hwreq->req.status = -EPROTO; break; } @@ -1051,9 +1047,9 @@ __acquires(ci->lock) if (req.wLength != 0) break; num = le16_to_cpu(req.wIndex); - dir = num & USB_ENDPOINT_DIR_MASK; + dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX; num &= USB_ENDPOINT_NUMBER_MASK; - if (dir) /* TX */ + if (dir == TX) num += ci->hw_ep_max / 2; if (!ci->ci_hw_ep[num].wedge) { spin_unlock(&ci->lock); @@ -1103,9 +1099,9 @@ __acquires(ci->lock) if (req.wLength != 0) break; num = le16_to_cpu(req.wIndex); - dir = num & USB_ENDPOINT_DIR_MASK; + dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX; num &= USB_ENDPOINT_NUMBER_MASK; - if (dir) /* TX */ + if (dir == TX) num += ci->hw_ep_max / 2; spin_unlock(&ci->lock); @@ -1680,12 +1676,10 @@ static int init_eps(struct ci_hdrc *ci) usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0); INIT_LIST_HEAD(&hwep->qh.queue); - hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL, - &hwep->qh.dma); + hwep->qh.ptr = dma_pool_zalloc(ci->qh_pool, GFP_KERNEL, + &hwep->qh.dma); if (hwep->qh.ptr == NULL) retval = -ENOMEM; - else - memset(hwep->qh.ptr, 0, sizeof(*hwep->qh.ptr)); /* * set up shorthands for ep0 out and in endpoints, @@ -1999,7 +1993,7 @@ int ci_hdrc_gadget_init(struct ci_hdrc *ci) if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC)) return -ENXIO; - rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL); + rdrv = devm_kzalloc(ci->dev, sizeof(*rdrv), GFP_KERNEL); if (!rdrv) return -ENOMEM; diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index ab8b027e8cc8..20d02a5e418d 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -56,6 +56,7 @@ #define MX6_BM_NON_BURST_SETTING BIT(1) #define MX6_BM_OVER_CUR_DIS BIT(7) +#define MX6_BM_OVER_CUR_POLARITY BIT(8) #define MX6_BM_WAKEUP_ENABLE BIT(10) #define MX6_BM_ID_WAKEUP BIT(16) #define MX6_BM_VBUS_WAKEUP BIT(17) @@ -266,11 +267,14 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) spin_lock_irqsave(&usbmisc->lock, flags); + reg = readl(usbmisc->base + data->index * 4); if (data->disable_oc) { - reg = readl(usbmisc->base + data->index * 4); - writel(reg | MX6_BM_OVER_CUR_DIS, - usbmisc->base + data->index * 4); + reg |= MX6_BM_OVER_CUR_DIS; + } else if (data->oc_polarity == 1) { + /* High active */ + reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY); } + writel(reg, usbmisc->base + data->index * 4); /* SoC non-burst setting */ reg = readl(usbmisc->base + data->index * 4); @@ -365,10 +369,14 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data) return -EINVAL; spin_lock_irqsave(&usbmisc->lock, flags); + reg = readl(usbmisc->base); if (data->disable_oc) { - reg = readl(usbmisc->base); - writel(reg | MX6_BM_OVER_CUR_DIS, usbmisc->base); + reg |= MX6_BM_OVER_CUR_DIS; + } else if (data->oc_polarity == 1) { + /* High active */ + reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY); } + writel(reg, usbmisc->base); reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK; @@ -492,6 +500,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = { .compatible = "fsl,imx6ul-usbmisc", .data = &imx6sx_usbmisc_ops, }, + { + .compatible = "fsl,imx7d-usbmisc", + .data = &imx7d_usbmisc_ops, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids); |