diff options
73 files changed, 3454 insertions, 607 deletions
diff --git a/Documentation/ABI/testing/configfs-acpi b/Documentation/ABI/testing/configfs-acpi new file mode 100644 index 000000000000..4ab4e99aa863 --- /dev/null +++ b/Documentation/ABI/testing/configfs-acpi @@ -0,0 +1,36 @@ +What: /config/acpi +Date: July 2016 +KernelVersion: 4.8 +Contact: linux-acpi@vger.kernel.org +Description: + This represents the ACPI subsystem entry point directory. It + contains sub-groups corresponding to ACPI configurable options. + +What: /config/acpi/table +Date: July 2016 +KernelVersion: 4.8 +Description: + + This group contains the configuration for user defined ACPI + tables. The attributes of a user define table are: + + aml - a binary attribute that the user can use to + fill in the ACPI aml definitions. Once the aml + data is written to this file and the file is + closed the table will be loaded and ACPI devices + will be enumerated. To check if the operation is + successful the user must check the error code + for close(). If the operation is successful, + subsequent writes to this attribute will fail. + + The rest of the attributes are read-only and are valid only + after the table has been loaded by filling the aml entry: + + signature - ASCII table signature + length - length of table in bytes, including the header + revision - ACPI Specification minor version number + oem_id - ASCII OEM identification + oem_table_id - ASCII OEM table identification + oem_revision - OEM revision number + asl_compiler_id - ASCII ASL compiler vendor ID + asl_compiler_revision - ASL compiler version diff --git a/Documentation/acpi/aml-debugger.txt b/Documentation/acpi/aml-debugger.txt new file mode 100644 index 000000000000..5f62aa4a493b --- /dev/null +++ b/Documentation/acpi/aml-debugger.txt @@ -0,0 +1,66 @@ +The AML Debugger + +Copyright (C) 2016, Intel Corporation +Author: Lv Zheng <lv.zheng@intel.com> + + +This document describes the usage of the AML debugger embedded in the Linux +kernel. + +1. Build the debugger + + The following kernel configuration items are required to enable the AML + debugger interface from the Linux kernel: + + CONFIG_ACPI_DEBUGGER=y + CONFIG_ACPI_DEBUGGER_USER=m + + The userspace utlities can be built from the kernel source tree using + the following commands: + + $ cd tools + $ make acpi + + The resultant userspace tool binary is then located at: + + tools/acpi/power/acpi/acpidbg/acpidbg + + It can be installed to system directories by running "make install" (as a + sufficiently privileged user). + +2. Start the userspace debugger interface + + After booting the kernel with the debugger built-in, the debugger can be + started by using the following commands: + + # mount -t debugfs none /sys/kernel/debug + # modprobe acpi_dbg + # tools/acpi/power/acpi/acpidbg/acpidbg + + That spawns the interactive AML debugger environment where you can execute + debugger commands. + + The commands are documented in the "ACPICA Overview and Programmer Reference" + that can be downloaded from + + https://acpica.org/documentation + + The detailed debugger commands reference is located in Chapter 12 "ACPICA + Debugger Reference". The "help" command can be used for a quick reference. + +3. Stop the userspace debugger interface + + The interactive debugger interface can be closed by pressing Ctrl+C or using + the "quit" or "exit" commands. When finished, unload the module with: + + # rmmod acpi_dbg + + The module unloading may fail if there is an acpidbg instance running. + +4. Run the debugger in a script + + It may be useful to run the AML debugger in a test script. "acpidbg" supports + this in a special "batch" mode. For example, the following command outputs + the entire ACPI namespace: + + # acpidbg -b "namespace" diff --git a/Documentation/acpi/linuxized-acpica.txt b/Documentation/acpi/linuxized-acpica.txt new file mode 100644 index 000000000000..defe2eec5331 --- /dev/null +++ b/Documentation/acpi/linuxized-acpica.txt @@ -0,0 +1,262 @@ +Linuxized ACPICA - Introduction to ACPICA Release Automation + +Copyright (C) 2013-2016, Intel Corporation +Author: Lv Zheng <lv.zheng@intel.com> + + +Abstract: + +This document describes the ACPICA project and the relationship between +ACPICA and Linux. It also describes how ACPICA code in drivers/acpi/acpica, +include/acpi and tools/power/acpi is automatically updated to follow the +upstream. + + +1. ACPICA Project + + The ACPI Component Architecture (ACPICA) project provides an operating + system (OS)-independent reference implementation of the Advanced + Configuration and Power Interface Specification (ACPI). It has been + adapted by various host OSes. By directly integrating ACPICA, Linux can + also benefit from the application experiences of ACPICA from other host + OSes. + + The homepage of ACPICA project is: www.acpica.org, it is maintained and + supported by Intel Corporation. + + The following figure depicts the Linux ACPI subystem where the ACPICA + adaptation is included: + + +---------------------------------------------------------+ + | | + | +---------------------------------------------------+ | + | | +------------------+ | | + | | | Table Management | | | + | | +------------------+ | | + | | +----------------------+ | | + | | | Namespace Management | | | + | | +----------------------+ | | + | | +------------------+ ACPICA Components | | + | | | Event Management | | | + | | +------------------+ | | + | | +---------------------+ | | + | | | Resource Management | | | + | | +---------------------+ | | + | | +---------------------+ | | + | | | Hardware Management | | | + | | +---------------------+ | | + | +---------------------------------------------------+ | | + | | | +------------------+ | | | + | | | | OS Service Layer | | | | + | | | +------------------+ | | | + | | +-------------------------------------------------|-+ | + | | +--------------------+ | | + | | | Device Enumeration | | | + | | +--------------------+ | | + | | +------------------+ | | + | | | Power Management | | | + | | +------------------+ Linux/ACPI Components | | + | | +--------------------+ | | + | | | Thermal Management | | | + | | +--------------------+ | | + | | +--------------------------+ | | + | | | Drivers for ACPI Devices | | | + | | +--------------------------+ | | + | | +--------+ | | + | | | ...... | | | + | | +--------+ | | + | +---------------------------------------------------+ | + | | + +---------------------------------------------------------+ + + Figure 1. Linux ACPI Software Components + + NOTE: + A. OS Service Layer - Provided by Linux to offer OS dependent + implementation of the predefined ACPICA interfaces (acpi_os_*). + include/acpi/acpiosxf.h + drivers/acpi/osl.c + include/acpi/platform + include/asm/acenv.h + B. ACPICA Functionality - Released from ACPICA code base to offer + OS independent implementation of the ACPICA interfaces (acpi_*). + drivers/acpi/acpica + include/acpi/ac*.h + tools/power/acpi + C. Linux/ACPI Functionality - Providing Linux specific ACPI + functionality to the other Linux kernel subsystems and user space + programs. + drivers/acpi + include/linux/acpi.h + include/linux/acpi*.h + include/acpi + tools/power/acpi + D. Architecture Specific ACPICA/ACPI Functionalities - Provided by the + ACPI subsystem to offer architecture specific implementation of the + ACPI interfaces. They are Linux specific components and are out of + the scope of this document. + include/asm/acpi.h + include/asm/acpi*.h + arch/*/acpi + +2. ACPICA Release + + The ACPICA project maintains its code base at the following repository URL: + https://github.com/acpica/acpica.git. As a rule, a release is made every + month. + + As the coding style adopted by the ACPICA project is not acceptable by + Linux, there is a release process to convert the ACPICA git commits into + Linux patches. The patches generated by this process are referred to as + "linuxized ACPICA patches". The release process is carried out on a local + copy the ACPICA git repository. Each commit in the monthly release is + converted into a linuxized ACPICA patch. Together, they form the montly + ACPICA release patchset for the Linux ACPI community. This process is + illustrated in the following figure: + + +-----------------------------+ + | acpica / master (-) commits | + +-----------------------------+ + /|\ | + | \|/ + | /---------------------\ +----------------------+ + | < Linuxize repo Utility >-->| old linuxized acpica |--+ + | \---------------------/ +----------------------+ | + | | + /---------\ | + < git reset > \ + \---------/ \ + /|\ /+-+ + | / | + +-----------------------------+ | | + | acpica / master (+) commits | | | + +-----------------------------+ | | + | | | + \|/ | | + /-----------------------\ +----------------------+ | | + < Linuxize repo Utilities >-->| new linuxized acpica |--+ | + \-----------------------/ +----------------------+ | + \|/ + +--------------------------+ /----------------------\ + | Linuxized ACPICA Patches |<----------------< Linuxize patch Utility > + +--------------------------+ \----------------------/ + | + \|/ + /---------------------------\ + < Linux ACPI Community Review > + \---------------------------/ + | + \|/ + +-----------------------+ /------------------\ +----------------+ + | linux-pm / linux-next |-->< Linux Merge Window >-->| linux / master | + +-----------------------+ \------------------/ +----------------+ + + Figure 2. ACPICA -> Linux Upstream Process + + NOTE: + A. Linuxize Utilities - Provided by the ACPICA repository, including a + utility located in source/tools/acpisrc folder and a number of + scripts located in generate/linux folder. + B. acpica / master - "master" branch of the git repository at + <https://github.com/acpica/acpica.git>. + C. linux-pm / linux-next - "linux-next" branch of the git repository at + <http://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git>. + D. linux / master - "master" branch of the git repository at + <http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git>. + + Before the linuxized ACPICA patches are sent to the Linux ACPI community + for review, there is a quality ensurance build test process to reduce + porting issues. Currently this build process only takes care of the + following kernel configuration options: + CONFIG_ACPI/CONFIG_ACPI_DEBUG/CONFIG_ACPI_DEBUGGER + +3. ACPICA Divergences + + Ideally, all of the ACPICA commits should be converted into Linux patches + automatically without manual modifications, the "linux / master" tree should + contain the ACPICA code that exactly corresponds to the ACPICA code + contained in "new linuxized acpica" tree and it should be possible to run + the release process fully automatically. + + As a matter of fact, however, there are source code differences between + the ACPICA code in Linux and the upstream ACPICA code, referred to as + "ACPICA Divergences". + + The various sources of ACPICA divergences include: + 1. Legacy divergences - Before the current ACPICA release process was + established, there already had been divergences between Linux and + ACPICA. Over the past several years those divergences have been greatly + reduced, but there still are several ones and it takes time to figure + out the underlying reasons for their existence. + 2. Manual modifications - Any manual modification (eg. coding style fixes) + made directly in the Linux sources obviously hurts the ACPICA release + automation. Thus it is recommended to fix such issues in the ACPICA + upstream source code and generate the linuxized fix using the ACPICA + release utilities (please refer to Section 4 below for the details). + 3. Linux specific features - Sometimes it's impossible to use the + current ACPICA APIs to implement features required by the Linux kernel, + so Linux developers occasionaly have to change ACPICA code directly. + Those changes may not be acceptable by ACPICA upstream and in such cases + they are left as committed ACPICA divergences unless the ACPICA side can + implement new mechanisms as replacements for them. + 4. ACPICA release fixups - ACPICA only tests commits using a set of the + user space simulation utilies, thus the linuxized ACPICA patches may + break the Linux kernel, leaving us build/boot failures. In order to + avoid breaking Linux bisection, fixes are applied directly to the + linuxized ACPICA patches during the release process. When the release + fixups are backported to the upstream ACPICA sources, they must follow + the upstream ACPICA rules and so further modifications may appear. + That may result in the appearance of new divergences. + 5. Fast tracking of ACPICA commits - Some ACPICA commits are regression + fixes or stable-candidate material, so they are applied in advance with + respect to the ACPICA release process. If such commits are reverted or + rebased on the ACPICA side in order to offer better solutions, new ACPICA + divergences are generated. + +4. ACPICA Development + + This paragraph guides Linux developers to use the ACPICA upstream release + utilities to obtain Linux patches corresponding to upstream ACPICA commits + before they become available from the ACPICA release process. + + 1. Cherry-pick an ACPICA commit + + First you need to git clone the ACPICA repository and the ACPICA change + you want to cherry pick must be committed into the local repository. + + Then the gen-patch.sh command can help to cherry-pick an ACPICA commit + from the ACPICA local repository: + + $ git clone https://github.com/acpica/acpica + $ cd acpica + $ generate/linux/gen-patch.sh -u [commit ID] + + Here the commit ID is the ACPICA local repository commit ID you want to + cherry pick. It can be omitted if the commit is "HEAD". + + 2. Cherry-pick recent ACPICA commits + + Sometimes you need to rebase your code on top of the most recent ACPICA + changes that haven't been applied to Linux yet. + + You can generate the ACPICA release series yourself and rebase your code on + top of the generated ACPICA release patches: + + $ git clone https://github.com/acpica/acpica + $ cd acpica + $ generate/linux/make-patches.sh -u [commit ID] + + The commit ID should be the last ACPICA commit accepted by Linux. Usually, + it is the commit modifying ACPI_CA_VERSION. It can be found by executing + "git blame source/include/acpixf.h" and referencing the line that contains + "ACPI_CA_VERSION". + + 3. Inspect the current divergences + + If you have local copies of both Linux and upstream ACPICA, you can generate + a diff file indicating the state of the current divergences: + + # git clone https://github.com/acpica/acpica + # git clone http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git + # cd acpica + # generate/linux/divergences.sh -s ../linux diff --git a/Documentation/acpi/ssdt-overlays.txt b/Documentation/acpi/ssdt-overlays.txt new file mode 100644 index 000000000000..5ae13f161ea2 --- /dev/null +++ b/Documentation/acpi/ssdt-overlays.txt @@ -0,0 +1,172 @@ + +In order to support ACPI open-ended hardware configurations (e.g. development +boards) we need a way to augment the ACPI configuration provided by the firmware +image. A common example is connecting sensors on I2C / SPI buses on development +boards. + +Although this can be accomplished by creating a kernel platform driver or +recompiling the firmware image with updated ACPI tables, neither is practical: +the former proliferates board specific kernel code while the latter requires +access to firmware tools which are often not publicly available. + +Because ACPI supports external references in AML code a more practical +way to augment firmware ACPI configuration is by dynamically loading +user defined SSDT tables that contain the board specific information. + +For example, to enumerate a Bosch BMA222E accelerometer on the I2C bus of the +Minnowboard MAX development board exposed via the LSE connector [1], the +following ASL code can be used: + +DefinitionBlock ("minnowmax.aml", "SSDT", 1, "Vendor", "Accel", 0x00000003) +{ + External (\_SB.I2C6, DeviceObj) + + Scope (\_SB.I2C6) + { + Device (STAC) + { + Name (_ADR, Zero) + Name (_HID, "BMA222E") + + Method (_CRS, 0, Serialized) + { + Name (RBUF, ResourceTemplate () + { + I2cSerialBus (0x0018, ControllerInitiated, 0x00061A80, + AddressingMode7Bit, "\\_SB.I2C6", 0x00, + ResourceConsumer, ,) + GpioInt (Edge, ActiveHigh, Exclusive, PullDown, 0x0000, + "\\_SB.GPO2", 0x00, ResourceConsumer, , ) + { // Pin list + 0 + } + }) + Return (RBUF) + } + } + } +} + +which can then be compiled to AML binary format: + +$ iasl minnowmax.asl + +Intel ACPI Component Architecture +ASL Optimizing Compiler version 20140214-64 [Mar 29 2014] +Copyright (c) 2000 - 2014 Intel Corporation + +ASL Input: minnomax.asl - 30 lines, 614 bytes, 7 keywords +AML Output: minnowmax.aml - 165 bytes, 6 named objects, 1 executable opcodes + +[1] http://wiki.minnowboard.org/MinnowBoard_MAX#Low_Speed_Expansion_Connector_.28Top.29 + +The resulting AML code can then be loaded by the kernel using one of the methods +below. + +== Loading ACPI SSDTs from initrd == + +This option allows loading of user defined SSDTs from initrd and it is useful +when the system does not support EFI or when there is not enough EFI storage. + +It works in a similar way with initrd based ACPI tables override/upgrade: SSDT +aml code must be placed in the first, uncompressed, initrd under the +"kernel/firmware/acpi" path. Multiple files can be used and this will translate +in loading multiple tables. Only SSDT and OEM tables are allowed. See +initrd_table_override.txt for more details. + +Here is an example: + +# Add the raw ACPI tables to an uncompressed cpio archive. +# They must be put into a /kernel/firmware/acpi directory inside the +# cpio archive. +# The uncompressed cpio archive must be the first. +# Other, typically compressed cpio archives, must be +# concatenated on top of the uncompressed one. +mkdir -p kernel/firmware/acpi +cp ssdt.aml kernel/firmware/acpi + +# Create the uncompressed cpio archive and concatenate the original initrd +# on top: +find kernel | cpio -H newc --create > /boot/instrumented_initrd +cat /boot/initrd >>/boot/instrumented_initrd + +== Loading ACPI SSDTs from EFI variables == + +This is the preferred method, when EFI is supported on the platform, because it +allows a persistent, OS independent way of storing the user defined SSDTs. There +is also work underway to implement EFI support for loading user defined SSDTs +and using this method will make it easier to convert to the EFI loading +mechanism when that will arrive. + +In order to load SSDTs from an EFI variable the efivar_ssdt kernel command line +parameter can be used. The argument for the option is the variable name to +use. If there are multiple variables with the same name but with different +vendor GUIDs, all of them will be loaded. + +In order to store the AML code in an EFI variable the efivarfs filesystem can be +used. It is enabled and mounted by default in /sys/firmware/efi/efivars in all +recent distribution. + +Creating a new file in /sys/firmware/efi/efivars will automatically create a new +EFI variable. Updating a file in /sys/firmware/efi/efivars will update the EFI +variable. Please note that the file name needs to be specially formatted as +"Name-GUID" and that the first 4 bytes in the file (little-endian format) +represent the attributes of the EFI variable (see EFI_VARIABLE_MASK in +include/linux/efi.h). Writing to the file must also be done with one write +operation. + +For example, you can use the following bash script to create/update an EFI +variable with the content from a given file: + +#!/bin/sh -e + +while ! [ -z "$1" ]; do + case "$1" in + "-f") filename="$2"; shift;; + "-g") guid="$2"; shift;; + *) name="$1";; + esac + shift +done + +usage() +{ + echo "Syntax: ${0##*/} -f filename [ -g guid ] name" + exit 1 +} + +[ -n "$name" -a -f "$filename" ] || usage + +EFIVARFS="/sys/firmware/efi/efivars" + +[ -d "$EFIVARFS" ] || exit 2 + +if stat -tf $EFIVARFS | grep -q -v de5e81e4; then + mount -t efivarfs none $EFIVARFS +fi + +# try to pick up an existing GUID +[ -n "$guid" ] || guid=$(find "$EFIVARFS" -name "$name-*" | head -n1 | cut -f2- -d-) + +# use a randomly generated GUID +[ -n "$guid" ] || guid="$(cat /proc/sys/kernel/random/uuid)" + +# efivarfs expects all of the data in one write +tmp=$(mktemp) +/bin/echo -ne "\007\000\000\000" | cat - $filename > $tmp +dd if=$tmp of="$EFIVARFS/$name-$guid" bs=$(stat -c %s $tmp) +rm $tmp + +== Loading ACPI SSDTs from configfs == + +This option allows loading of user defined SSDTs from userspace via the configfs +interface. The CONFIG_ACPI_CONFIGFS option must be select and configfs must be +mounted. In the following examples, we assume that configfs has been mounted in +/config. + +New tables can be loading by creating new directories in /config/acpi/table/ and +writing the SSDT aml code in the aml attribute: + +cd /config/acpi/table +mkdir my_ssdt +cat ~/ssdt.aml > my_ssdt/aml diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 118538b548f6..769db8399ac8 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -582,6 +582,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. bootmem_debug [KNL] Enable bootmem allocator debug messages. + bert_disable [ACPI] + Disable BERT OS support on buggy BIOSes. + bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards) bttv.radio= Most important insmod options are available as kernel args too. @@ -1193,6 +1196,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Address Range Mirroring feature even if your box doesn't support it. + efivar_ssdt= [EFI; X86] Name of an EFI variable that contains an SSDT + that is to be dynamically loaded by Linux. If there are + multiple variables with the same name but with different + vendor GUIDs, all of them will be loaded. See + Documentation/acpi/ssdt-overlays.txt for details. + + eisa_irq_edge= [PARISC,HW] See header of drivers/parisc/eisa.c. diff --git a/MAINTAINERS b/MAINTAINERS index 4e1e4e94a83a..3eaa4a06bcc1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -288,6 +288,7 @@ F: include/linux/acpi.h F: include/acpi/ F: Documentation/acpi/ F: Documentation/ABI/testing/sysfs-bus-acpi +F: Documentation/ABI/testing/configfs-acpi F: drivers/pci/*acpi* F: drivers/pci/*/*acpi* F: drivers/pci/*/*/*acpi* diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 5a0a691d4220..20d5a60530b1 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -4,6 +4,7 @@ config ARM64 select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI select ARCH_HAS_DEVMEM_IS_ALLOWED + select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_GCOV_PROFILE_ALL diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index aee323b13802..5420cb0fcb3e 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -113,4 +113,14 @@ static inline const char *acpi_get_enable_method(int cpu) pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr); #endif +#ifdef CONFIG_ACPI_NUMA +int arm64_acpi_numa_init(void); +int acpi_numa_get_nid(unsigned int cpu, u64 hwid); +#else +static inline int arm64_acpi_numa_init(void) { return -ENOSYS; } +static inline int acpi_numa_get_nid(unsigned int cpu, u64 hwid) { return NUMA_NO_NODE; } +#endif /* CONFIG_ACPI_NUMA */ + +#define ACPI_TABLE_UPGRADE_MAX_PHYS MEMBLOCK_ALLOC_ACCESSIBLE + #endif /*_ASM_ACPI_H*/ diff --git a/arch/arm64/include/asm/numa.h b/arch/arm64/include/asm/numa.h index e9b4f2942335..600887e491fd 100644 --- a/arch/arm64/include/asm/numa.h +++ b/arch/arm64/include/asm/numa.h @@ -5,6 +5,8 @@ #ifdef CONFIG_NUMA +#define NR_NODE_MEMBLKS (MAX_NUMNODES * 2) + /* currently, arm64 implements flat NUMA topology */ #define parent_node(node) (node) diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 2173149d8954..a5125c6d1f87 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -42,6 +42,7 @@ arm64-obj-$(CONFIG_EFI) += efi.o efi-entry.stub.o arm64-obj-$(CONFIG_PCI) += pci.o arm64-obj-$(CONFIG_ARMV8_DEPRECATED) += armv8_deprecated.o arm64-obj-$(CONFIG_ACPI) += acpi.o +arm64-obj-$(CONFIG_ACPI_NUMA) += acpi_numa.o arm64-obj-$(CONFIG_ARM64_ACPI_PARKING_PROTOCOL) += acpi_parking_protocol.o arm64-obj-$(CONFIG_PARAVIRT) += paravirt.o arm64-obj-$(CONFIG_RANDOMIZE_BASE) += kaslr.o diff --git a/arch/arm64/kernel/acpi_numa.c b/arch/arm64/kernel/acpi_numa.c new file mode 100644 index 000000000000..f85149cc7c71 --- /dev/null +++ b/arch/arm64/kernel/acpi_numa.c @@ -0,0 +1,112 @@ +/* + * ACPI 5.1 based NUMA setup for ARM64 + * Lots of code was borrowed from arch/x86/mm/srat.c + * + * Copyright 2004 Andi Kleen, SuSE Labs. + * Copyright (C) 2013-2016, Linaro Ltd. + * Author: Hanjun Guo <hanjun.guo@linaro.org> + * + * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs. + * + * Called from acpi_numa_init while reading the SRAT and SLIT tables. + * Assumes all memory regions belonging to a single proximity domain + * are in one chunk. Holes between them will be included in the node. + */ + +#define pr_fmt(fmt) "ACPI: NUMA: " fmt + +#include <linux/acpi.h> +#include <linux/bitmap.h> +#include <linux/bootmem.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/memblock.h> +#include <linux/mmzone.h> +#include <linux/module.h> +#include <linux/topology.h> + +#include <acpi/processor.h> +#include <asm/numa.h> + +static int cpus_in_srat; + +struct __node_cpu_hwid { + u32 node_id; /* logical node containing this CPU */ + u64 cpu_hwid; /* MPIDR for this CPU */ +}; + +static struct __node_cpu_hwid early_node_cpu_hwid[NR_CPUS] = { +[0 ... NR_CPUS - 1] = {NUMA_NO_NODE, PHYS_CPUID_INVALID} }; + +int acpi_numa_get_nid(unsigned int cpu, u64 hwid) +{ + int i; + + for (i = 0; i < cpus_in_srat; i++) { + if (hwid == early_node_cpu_hwid[i].cpu_hwid) + return early_node_cpu_hwid[i].node_id; + } + + return NUMA_NO_NODE; +} + +/* Callback for Proximity Domain -> ACPI processor UID mapping */ +void __init acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) +{ + int pxm, node; + phys_cpuid_t mpidr; + + if (srat_disabled()) + return; + + if (pa->header.length < sizeof(struct acpi_srat_gicc_affinity)) { + pr_err("SRAT: Invalid SRAT header length: %d\n", + pa->header.length); + bad_srat(); + return; + } + + if (!(pa->flags & ACPI_SRAT_GICC_ENABLED)) + return; + + if (cpus_in_srat >= NR_CPUS) { + pr_warn_once("SRAT: cpu_to_node_map[%d] is too small, may not be able to use all cpus\n", + NR_CPUS); + return; + } + + pxm = pa->proximity_domain; + node = acpi_map_pxm_to_node(pxm); + + if (node == NUMA_NO_NODE || node >= MAX_NUMNODES) { + pr_err("SRAT: Too many proximity domains %d\n", pxm); + bad_srat(); + return; + } + + mpidr = acpi_map_madt_entry(pa->acpi_processor_uid); + if (mpidr == PHYS_CPUID_INVALID) { + pr_err("SRAT: PXM %d with ACPI ID %d has no valid MPIDR in MADT\n", + pxm, pa->acpi_processor_uid); + bad_srat(); + return; + } + + early_node_cpu_hwid[cpus_in_srat].node_id = node; + early_node_cpu_hwid[cpus_in_srat].cpu_hwid = mpidr; + node_set(node, numa_nodes_parsed); + cpus_in_srat++; + pr_info("SRAT: PXM %d -> MPIDR 0x%Lx -> Node %d\n", + pxm, mpidr, node); +} + +int __init arm64_acpi_numa_init(void) +{ + int ret; + + ret = acpi_numa_init(); + if (ret) + return ret; + + return srat_disabled() ? -EINVAL : 0; +} diff --git a/arch/arm64/kernel/cpuidle.c b/arch/arm64/kernel/cpuidle.c index e11857fce05f..75a0f8acef66 100644 --- a/arch/arm64/kernel/cpuidle.c +++ b/arch/arm64/kernel/cpuidle.c @@ -9,13 +9,16 @@ * published by the Free Software Foundation. */ +#include <linux/acpi.h> +#include <linux/cpuidle.h> +#include <linux/cpu_pm.h> #include <linux/of.h> #include <linux/of_device.h> #include <asm/cpuidle.h> #include <asm/cpu_ops.h> -int __init arm_cpuidle_init(unsigned int cpu) +int arm_cpuidle_init(unsigned int cpu) { int ret = -EOPNOTSUPP; @@ -39,3 +42,18 @@ int arm_cpuidle_suspend(int index) return cpu_ops[cpu]->cpu_suspend(index); } + +#ifdef CONFIG_ACPI + +#include <acpi/processor.h> + +int acpi_processor_ffh_lpi_probe(unsigned int cpu) +{ + return arm_cpuidle_init(cpu); +} + +int acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi) +{ + return CPU_PM_CPU_IDLE_ENTER(arm_cpuidle_suspend, lpi->index); +} +#endif diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 3279defabaa2..92f0e1e767cf 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -260,11 +260,13 @@ void __init setup_arch(char **cmdline_p) efi_init(); arm64_memblock_init(); + paging_init(); + + acpi_table_upgrade(); + /* Parse the ACPI tables for possible boot-time configuration */ acpi_boot_table_init(); - paging_init(); - if (acpi_disabled) unflatten_device_tree(); diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index 62ff3c0622e2..a68e0ccd9f4b 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -560,6 +560,8 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor) */ acpi_set_mailbox_entry(cpu_count, processor); + early_map_cpu_to_node(cpu_count, acpi_numa_get_nid(cpu_count, hwid)); + cpu_count++; } diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c index 98dc1047f2a2..c7fe3ec70774 100644 --- a/arch/arm64/mm/numa.c +++ b/arch/arm64/mm/numa.c @@ -17,6 +17,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/acpi.h> #include <linux/bootmem.h> #include <linux/memblock.h> #include <linux/module.h> @@ -29,7 +30,7 @@ static int cpu_to_node_map[NR_CPUS] = { [0 ... NR_CPUS-1] = NUMA_NO_NODE }; static int numa_distance_cnt; static u8 *numa_distance; -static int numa_off; +static bool numa_off; static __init int numa_parse_early_param(char *opt) { @@ -37,7 +38,7 @@ static __init int numa_parse_early_param(char *opt) return -EINVAL; if (!strncmp(opt, "off", 3)) { pr_info("%s\n", "NUMA turned off"); - numa_off = 1; + numa_off = true; } return 0; } @@ -131,25 +132,25 @@ void __init early_map_cpu_to_node(unsigned int cpu, int nid) * numa_add_memblk - Set node id to memblk * @nid: NUMA node ID of the new memblk * @start: Start address of the new memblk - * @size: Size of the new memblk + * @end: End address of the new memblk * * RETURNS: * 0 on success, -errno on failure. */ -int __init numa_add_memblk(int nid, u64 start, u64 size) +int __init numa_add_memblk(int nid, u64 start, u64 end) { int ret; - ret = memblock_set_node(start, size, &memblock.memory, nid); + ret = memblock_set_node(start, (end - start), &memblock.memory, nid); if (ret < 0) { pr_err("NUMA: memblock [0x%llx - 0x%llx] failed to add on node %d\n", - start, (start + size - 1), nid); + start, (end - 1), nid); return ret; } node_set(nid, numa_nodes_parsed); pr_info("NUMA: Adding memblock [0x%llx - 0x%llx] on node %d\n", - start, (start + size - 1), nid); + start, (end - 1), nid); return ret; } @@ -362,12 +363,15 @@ static int __init dummy_numa_init(void) int ret; struct memblock_region *mblk; - pr_info("%s\n", "No NUMA configuration found"); + if (numa_off) + pr_info("NUMA disabled\n"); /* Forced off on command line. */ + else + pr_info("No NUMA configuration found\n"); pr_info("NUMA: Faking a node at [mem %#018Lx-%#018Lx]\n", 0LLU, PFN_PHYS(max_pfn) - 1); for_each_memblock(memory, mblk) { - ret = numa_add_memblk(0, mblk->base, mblk->size); + ret = numa_add_memblk(0, mblk->base, mblk->base + mblk->size); if (!ret) continue; @@ -375,7 +379,7 @@ static int __init dummy_numa_init(void) return ret; } - numa_off = 1; + numa_off = true; return 0; } @@ -388,7 +392,9 @@ static int __init dummy_numa_init(void) void __init arm64_numa_init(void) { if (!numa_off) { - if (!numa_init(of_numa_init)) + if (!acpi_disabled && !numa_init(arm64_acpi_numa_init)) + return; + if (acpi_disabled && !numa_init(of_numa_init)) return; } diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h index aa0fdf125aba..a3d0211970e9 100644 --- a/arch/ia64/include/asm/acpi.h +++ b/arch/ia64/include/asm/acpi.h @@ -140,6 +140,9 @@ static inline void per_cpu_scan_finalize(int min_cpus, int reserve_cpus) } } } + +extern void acpi_numa_fixup(void); + #endif /* CONFIG_ACPI_NUMA */ #endif /*__KERNEL__*/ diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index b1698bc042c8..92b7bc956795 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -524,7 +524,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) return 0; } -void __init acpi_numa_arch_fixup(void) +void __init acpi_numa_fixup(void) { int i, j, node_from, node_to; diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 2029a38a72ae..afddb3e80a29 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -552,6 +552,7 @@ setup_arch (char **cmdline_p) early_acpi_boot_init(); # ifdef CONFIG_ACPI_NUMA acpi_numa_init(); + acpi_numa_fixup(); # ifdef CONFIG_ACPI_HOTPLUG_CPU prefill_possible_map(); # endif diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5977fea2c8b1..2fa55851d2a9 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -22,6 +22,7 @@ config X86 select ANON_INODES select ARCH_CLOCKSOURCE_DATA select ARCH_DISCARD_MEMBLOCK + select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS select ARCH_HAS_DEVMEM_IS_ALLOWED diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 94c18ebfd68c..5391b0ae7cc3 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -145,7 +145,6 @@ static inline void disable_acpi(void) { } #define ARCH_HAS_POWER_INIT 1 #ifdef CONFIG_ACPI_NUMA -extern int acpi_numa; extern int x86_acpi_numa_init(void); #endif /* CONFIG_ACPI_NUMA */ @@ -170,4 +169,6 @@ static inline pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr) } #endif +#define ACPI_TABLE_UPGRADE_MAX_PHYS (max_low_pfn_mapped << PAGE_SHIFT) + #endif /* _ASM_X86_ACPI_H */ diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index a2616584b6e9..6cb2b02fcc87 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -400,10 +400,6 @@ static void __init reserve_initrd(void) memblock_free(ramdisk_image, ramdisk_end - ramdisk_image); } -static void __init early_initrd_acpi_init(void) -{ - early_acpi_table_init((void *)initrd_start, initrd_end - initrd_start); -} #else static void __init early_reserve_initrd(void) { @@ -411,9 +407,6 @@ static void __init early_reserve_initrd(void) static void __init reserve_initrd(void) { } -static void __init early_initrd_acpi_init(void) -{ -} #endif /* CONFIG_BLK_DEV_INITRD */ static void __init parse_setup_data(void) @@ -1149,7 +1142,7 @@ void __init setup_arch(char **cmdline_p) reserve_initrd(); - early_initrd_acpi_init(); + acpi_table_upgrade(); vsmp_init(); diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 9c086c57105c..968ac028c34e 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -1,4 +1,5 @@ /* Common code for 32 and 64-bit NUMA */ +#include <linux/acpi.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/string.h> @@ -15,7 +16,6 @@ #include <asm/e820.h> #include <asm/proto.h> #include <asm/dma.h> -#include <asm/acpi.h> #include <asm/amd_nb.h> #include "numa_internal.h" diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c index b5f821881465..b1ecff460a46 100644 --- a/arch/x86/mm/srat.c +++ b/arch/x86/mm/srat.c @@ -15,8 +15,6 @@ #include <linux/bitmap.h> #include <linux/module.h> #include <linux/topology.h> -#include <linux/bootmem.h> -#include <linux/memblock.h> #include <linux/mm.h> #include <asm/proto.h> #include <asm/numa.h> @@ -24,51 +22,6 @@ #include <asm/apic.h> #include <asm/uv/uv.h> -int acpi_numa __initdata; - -static __init int setup_node(int pxm) -{ - return acpi_map_pxm_to_node(pxm); -} - -static __init void bad_srat(void) -{ - printk(KERN_ERR "SRAT: SRAT not used.\n"); - acpi_numa = -1; -} - -static __init inline int srat_disabled(void) -{ - return acpi_numa < 0; -} - -/* - * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for - * I/O localities since SRAT does not list them. I/O localities are - * not supported at this point. - */ -void __init acpi_numa_slit_init(struct acpi_table_slit *slit) -{ - int i, j; - - for (i = 0; i < slit->locality_count; i++) { - const int from_node = pxm_to_node(i); - - if (from_node == NUMA_NO_NODE) - continue; - - for (j = 0; j < slit->locality_count; j++) { - const int to_node = pxm_to_node(j); - - if (to_node == NUMA_NO_NODE) - continue; - - numa_set_distance(from_node, to_node, - slit->entry[slit->locality_count * i + j]); - } - } -} - /* Callback for Proximity Domain -> x2APIC mapping */ void __init acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) @@ -91,7 +44,7 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) pxm, apic_id); return; } - node = setup_node(pxm); + node = acpi_map_pxm_to_node(pxm); if (node < 0) { printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); bad_srat(); @@ -104,7 +57,6 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) } set_apicid_to_node(apic_id, node); node_set(node, numa_nodes_parsed); - acpi_numa = 1; printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n", pxm, apic_id, node); } @@ -127,7 +79,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) pxm = pa->proximity_domain_lo; if (acpi_srat_revision >= 2) pxm |= *((unsigned int*)pa->proximity_domain_hi) << 8; - node = setup_node(pxm); + node = acpi_map_pxm_to_node(pxm); if (node < 0) { printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); bad_srat(); @@ -146,74 +98,10 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) set_apicid_to_node(apic_id, node); node_set(node, numa_nodes_parsed); - acpi_numa = 1; printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n", pxm, apic_id, node); } -#ifdef CONFIG_MEMORY_HOTPLUG -static inline int save_add_info(void) {return 1;} -#else -static inline int save_add_info(void) {return 0;} -#endif - -/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ -int __init -acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) -{ - u64 start, end; - u32 hotpluggable; - int node, pxm; - - if (srat_disabled()) - goto out_err; - if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) - goto out_err_bad_srat; - if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0) - goto out_err; - hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE; - if (hotpluggable && !save_add_info()) - goto out_err; - - start = ma->base_address; - end = start + ma->length; - pxm = ma->proximity_domain; - if (acpi_srat_revision <= 1) - pxm &= 0xff; - - node = setup_node(pxm); - if (node < 0) { - printk(KERN_ERR "SRAT: Too many proximity domains.\n"); - goto out_err_bad_srat; - } - - if (numa_add_memblk(node, start, end) < 0) - goto out_err_bad_srat; - - node_set(node, numa_nodes_parsed); - - pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s%s\n", - node, pxm, - (unsigned long long) start, (unsigned long long) end - 1, - hotpluggable ? " hotplug" : "", - ma->flags & ACPI_SRAT_MEM_NON_VOLATILE ? " non-volatile" : ""); - - /* Mark hotplug range in memblock. */ - if (hotpluggable && memblock_mark_hotplug(start, ma->length)) - pr_warn("SRAT: Failed to mark hotplug range [mem %#010Lx-%#010Lx] in memblock\n", - (unsigned long long)start, (unsigned long long)end - 1); - - max_possible_pfn = max(max_possible_pfn, PFN_UP(end - 1)); - - return 0; -out_err_bad_srat: - bad_srat(); -out_err: - return -1; -} - -void __init acpi_numa_arch_fixup(void) {} - int __init x86_acpi_numa_init(void) { int ret; diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index b7e2e776397d..acad70a0bb0d 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -213,6 +213,10 @@ config ACPI_CPU_FREQ_PSS bool select THERMAL +config ACPI_PROCESSOR_CSTATE + def_bool y + depends on IA64 || X86 + config ACPI_PROCESSOR_IDLE bool select CPU_IDLE @@ -234,7 +238,7 @@ config ACPI_CPPC_LIB config ACPI_PROCESSOR tristate "Processor" depends on X86 || IA64 || ARM64 - select ACPI_PROCESSOR_IDLE if X86 || IA64 + select ACPI_PROCESSOR_IDLE select ACPI_CPU_FREQ_PSS if X86 || IA64 default y help @@ -291,8 +295,8 @@ config ACPI_THERMAL config ACPI_NUMA bool "NUMA support" depends on NUMA - depends on (X86 || IA64) - default y if IA64_GENERIC || IA64_SGI_SN2 + depends on (X86 || IA64 || ARM64) + default y if IA64_GENERIC || IA64_SGI_SN2 || ARM64 config ACPI_CUSTOM_DSDT_FILE string "Custom DSDT Table file to include" @@ -311,9 +315,12 @@ config ACPI_CUSTOM_DSDT bool default ACPI_CUSTOM_DSDT_FILE != "" +config ARCH_HAS_ACPI_TABLE_UPGRADE + def_bool n + config ACPI_TABLE_UPGRADE bool "Allow upgrading ACPI tables via initrd" - depends on BLK_DEV_INITRD && X86 + depends on BLK_DEV_INITRD && ARCH_HAS_ACPI_TABLE_UPGRADE default y help This option provides functionality to upgrade arbitrary ACPI tables @@ -475,6 +482,7 @@ config ACPI_NFIT_DEBUG issue. source "drivers/acpi/apei/Kconfig" +source "drivers/acpi/dptf/Kconfig" config ACPI_EXTLOG tristate "Extended Error Log support" @@ -519,6 +527,20 @@ config XPOWER_PMIC_OPREGION help This config adds ACPI operation region support for XPower AXP288 PMIC. +config BXT_WC_PMIC_OPREGION + bool "ACPI operation region support for BXT WhiskeyCove PMIC" + depends on INTEL_SOC_PMIC + help + This config adds ACPI operation region support for BXT WhiskeyCove PMIC. + endif +config ACPI_CONFIGFS + tristate "ACPI configfs support" + select CONFIGFS_FS + help + Select this option to enable support for ACPI configuration from + userspace. The configurable ACPI groups will be visible under + /config/acpi, assuming configfs is mounted under /config. + endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 251ce85a66fb..88f54f03e3d2 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -44,7 +44,6 @@ acpi-y += acpi_lpss.o acpi_apd.o acpi-y += acpi_platform.o acpi-y += acpi_pnp.o acpi-$(CONFIG_ARM_AMBA) += acpi_amba.o -acpi-y += int340x_thermal.o acpi-y += power.o acpi-y += event.o acpi-$(CONFIG_ACPI_REDUCED_HARDWARE_ONLY) += evged.o @@ -99,5 +98,9 @@ obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o +obj-$(CONFIG_BXT_WC_PMIC_OPREGION) += pmic/intel_pmic_bxtwc.o + +obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o video-objs += acpi_video.o video_detect.o +obj-y += dptf/ diff --git a/drivers/acpi/acpi_configfs.c b/drivers/acpi/acpi_configfs.c new file mode 100644 index 000000000000..146a77fb762d --- /dev/null +++ b/drivers/acpi/acpi_configfs.c @@ -0,0 +1,267 @@ +/* + * ACPI configfs support + * + * Copyright (c) 2016 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#define pr_fmt(fmt) "ACPI configfs: " fmt + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/configfs.h> +#include <linux/acpi.h> + +static struct config_group *acpi_table_group; + +struct acpi_table { + struct config_item cfg; + struct acpi_table_header *header; +}; + +static ssize_t acpi_table_aml_write(struct config_item *cfg, + const void *data, size_t size) +{ + const struct acpi_table_header *header = data; + struct acpi_table *table; + int ret; + + table = container_of(cfg, struct acpi_table, cfg); + + if (table->header) { + pr_err("table already loaded\n"); + return -EBUSY; + } + + if (header->length != size) { + pr_err("invalid table length\n"); + return -EINVAL; + } + + if (memcmp(header->signature, ACPI_SIG_SSDT, 4)) { + pr_err("invalid table signature\n"); + return -EINVAL; + } + + table = container_of(cfg, struct acpi_table, cfg); + + table->header = kmemdup(header, header->length, GFP_KERNEL); + if (!table->header) + return -ENOMEM; + + ret = acpi_load_table(table->header); + if (ret) { + kfree(table->header); + table->header = NULL; + } + + return ret; +} + +static inline struct acpi_table_header *get_header(struct config_item *cfg) +{ + struct acpi_table *table = container_of(cfg, struct acpi_table, cfg); + + if (!table->header) + pr_err("table not loaded\n"); + + return table->header; +} + +static ssize_t acpi_table_aml_read(struct config_item *cfg, + void *data, size_t size) +{ + struct acpi_table_header *h = get_header(cfg); + + if (!h) + return -EINVAL; + + if (data) + memcpy(data, h, h->length); + + return h->length; +} + +#define MAX_ACPI_TABLE_SIZE (128 * 1024) + +CONFIGFS_BIN_ATTR(acpi_table_, aml, NULL, MAX_ACPI_TABLE_SIZE); + +struct configfs_bin_attribute *acpi_table_bin_attrs[] = { + &acpi_table_attr_aml, + NULL, +}; + +ssize_t acpi_table_signature_show(struct config_item *cfg, char *str) +{ + struct acpi_table_header *h = get_header(cfg); + + if (!h) + return -EINVAL; + + return sprintf(str, "%.*s\n", ACPI_NAME_SIZE, h->signature); +} + +ssize_t acpi_table_length_show(struct config_item *cfg, char *str) +{ + struct acpi_table_header *h = get_header(cfg); + + if (!h) + return -EINVAL; + + return sprintf(str, "%d\n", h->length); +} + +ssize_t acpi_table_revision_show(struct config_item *cfg, char *str) +{ + struct acpi_table_header *h = get_header(cfg); + + if (!h) + return -EINVAL; + + return sprintf(str, "%d\n", h->revision); +} + +ssize_t acpi_table_oem_id_show(struct config_item *cfg, char *str) +{ + struct acpi_table_header *h = get_header(cfg); + + if (!h) + return -EINVAL; + + return sprintf(str, "%.*s\n", ACPI_OEM_ID_SIZE, h->oem_id); +} + +ssize_t acpi_table_oem_table_id_show(struct config_item *cfg, char *str) +{ + struct acpi_table_header *h = get_header(cfg); + + if (!h) + return -EINVAL; + + return sprintf(str, "%.*s\n", ACPI_OEM_TABLE_ID_SIZE, h->oem_table_id); +} + +ssize_t acpi_table_oem_revision_show(struct config_item *cfg, char *str) +{ + struct acpi_table_header *h = get_header(cfg); + + if (!h) + return -EINVAL; + + return sprintf(str, "%d\n", h->oem_revision); +} + +ssize_t acpi_table_asl_compiler_id_show(struct config_item *cfg, char *str) +{ + struct acpi_table_header *h = get_header(cfg); + + if (!h) + return -EINVAL; + + return sprintf(str, "%.*s\n", ACPI_NAME_SIZE, h->asl_compiler_id); +} + +ssize_t acpi_table_asl_compiler_revision_show(struct config_item *cfg, + char *str) +{ + struct acpi_table_header *h = get_header(cfg); + + if (!h) + return -EINVAL; + + return sprintf(str, "%d\n", h->asl_compiler_revision); +} + +CONFIGFS_ATTR_RO(acpi_table_, signature); +CONFIGFS_ATTR_RO(acpi_table_, length); +CONFIGFS_ATTR_RO(acpi_table_, revision); +CONFIGFS_ATTR_RO(acpi_table_, oem_id); +CONFIGFS_ATTR_RO(acpi_table_, oem_table_id); +CONFIGFS_ATTR_RO(acpi_table_, oem_revision); +CONFIGFS_ATTR_RO(acpi_table_, asl_compiler_id); +CONFIGFS_ATTR_RO(acpi_table_, asl_compiler_revision); + +struct configfs_attribute *acpi_table_attrs[] = { + &acpi_table_attr_signature, + &acpi_table_attr_length, + &acpi_table_attr_revision, + &acpi_table_attr_oem_id, + &acpi_table_attr_oem_table_id, + &acpi_table_attr_oem_revision, + &acpi_table_attr_asl_compiler_id, + &acpi_table_attr_asl_compiler_revision, + NULL, +}; + +static struct config_item_type acpi_table_type = { + .ct_owner = THIS_MODULE, + .ct_bin_attrs = acpi_table_bin_attrs, + .ct_attrs = acpi_table_attrs, +}; + +static struct config_item *acpi_table_make_item(struct config_group *group, + const char *name) +{ + struct acpi_table *table; + + table = kzalloc(sizeof(*table), GFP_KERNEL); + if (!table) + return ERR_PTR(-ENOMEM); + + config_item_init_type_name(&table->cfg, name, &acpi_table_type); + return &table->cfg; +} + +struct configfs_group_operations acpi_table_group_ops = { + .make_item = acpi_table_make_item, +}; + +static struct config_item_type acpi_tables_type = { + .ct_owner = THIS_MODULE, + .ct_group_ops = &acpi_table_group_ops, +}; + +static struct config_item_type acpi_root_group_type = { + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem acpi_configfs = { + .su_group = { + .cg_item = { + .ci_namebuf = "acpi", + .ci_type = &acpi_root_group_type, + }, + }, + .su_mutex = __MUTEX_INITIALIZER(acpi_configfs.su_mutex), +}; + +static int __init acpi_configfs_init(void) +{ + int ret; + struct config_group *root = &acpi_configfs.su_group; + + config_group_init(root); + + ret = configfs_register_subsystem(&acpi_configfs); + if (ret) + return ret; + + acpi_table_group = configfs_register_default_group(root, "table", + &acpi_tables_type); + return PTR_ERR_OR_ZERO(acpi_table_group); +} +module_init(acpi_configfs_init); + +static void __exit acpi_configfs_exit(void) +{ + configfs_unregister_default_group(acpi_table_group); + configfs_unregister_subsystem(&acpi_configfs); +} +module_exit(acpi_configfs_exit); + +MODULE_AUTHOR("Octavian Purdila <octavian.purdila@intel.com>"); +MODULE_DESCRIPTION("ACPI configfs support"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/acpi/acpi_lpat.c b/drivers/acpi/acpi_lpat.c index feb61c1630eb..c1c4877ca96c 100644 --- a/drivers/acpi/acpi_lpat.c +++ b/drivers/acpi/acpi_lpat.c @@ -13,7 +13,7 @@ * GNU General Public License for more details. */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/acpi.h> #include <acpi/acpi_lpat.h> @@ -157,5 +157,3 @@ void acpi_lpat_free_conversion_table(struct acpi_lpat_conversion_table } } EXPORT_SYMBOL_GPL(acpi_lpat_free_conversion_table); - -MODULE_LICENSE("GPL"); diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c index c1d138e128cb..c5557d070954 100644 --- a/drivers/acpi/acpi_video.c +++ b/drivers/acpi/acpi_video.c @@ -1246,6 +1246,9 @@ static int acpi_video_device_enumerate(struct acpi_video_bus *video) union acpi_object *dod = NULL; union acpi_object *obj; + if (!video->cap._DOD) + return AE_NOT_EXIST; + status = acpi_evaluate_object(video->device->handle, "_DOD", NULL, &buffer); if (!ACPI_SUCCESS(status)) { ACPI_EXCEPTION((AE_INFO, status, "Evaluating _DOD")); diff --git a/drivers/acpi/apei/Makefile b/drivers/acpi/apei/Makefile index 5d575a955940..e50573de25f1 100644 --- a/drivers/acpi/apei/Makefile +++ b/drivers/acpi/apei/Makefile @@ -3,4 +3,4 @@ obj-$(CONFIG_ACPI_APEI_GHES) += ghes.o obj-$(CONFIG_ACPI_APEI_EINJ) += einj.o obj-$(CONFIG_ACPI_APEI_ERST_DEBUG) += erst-dbg.o -apei-y := apei-base.o hest.o erst.o +apei-y := apei-base.o hest.o erst.o bert.o diff --git a/drivers/acpi/apei/apei-internal.h b/drivers/acpi/apei/apei-internal.h index 16129c78b489..6e9f14c0a71b 100644 --- a/drivers/acpi/apei/apei-internal.h +++ b/drivers/acpi/apei/apei-internal.h @@ -1,6 +1,6 @@ /* * apei-internal.h - ACPI Platform Error Interface internal - * definations. + * definitions. */ #ifndef APEI_INTERNAL_H diff --git a/drivers/acpi/apei/bert.c b/drivers/acpi/apei/bert.c new file mode 100644 index 000000000000..a05b5c0cf181 --- /dev/null +++ b/drivers/acpi/apei/bert.c @@ -0,0 +1,150 @@ +/* + * APEI Boot Error Record Table (BERT) support + * + * Copyright 2011 Intel Corp. + * Author: Huang Ying <ying.huang@intel.com> + * + * Under normal circumstances, when a hardware error occurs, the error + * handler receives control and processes the error. This gives OSPM a + * chance to process the error condition, report it, and optionally attempt + * recovery. In some cases, the system is unable to process an error. + * For example, system firmware or a management controller may choose to + * reset the system or the system might experience an uncontrolled crash + * or reset.The boot error source is used to report unhandled errors that + * occurred in a previous boot. This mechanism is described in the BERT + * table. + * + * For more information about BERT, please refer to ACPI Specification + * version 4.0, section 17.3.1 + * + * This file is licensed under GPLv2. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/io.h> + +#include "apei-internal.h" + +#undef pr_fmt +#define pr_fmt(fmt) "BERT: " fmt + +static int bert_disable; + +static void __init bert_print_all(struct acpi_bert_region *region, + unsigned int region_len) +{ + struct acpi_hest_generic_status *estatus = + (struct acpi_hest_generic_status *)region; + int remain = region_len; + u32 estatus_len; + + if (!estatus->block_status) + return; + + while (remain > sizeof(struct acpi_bert_region)) { + if (cper_estatus_check(estatus)) { + pr_err(FW_BUG "Invalid error record.\n"); + return; + } + + estatus_len = cper_estatus_len(estatus); + if (remain < estatus_len) { + pr_err(FW_BUG "Truncated status block (length: %u).\n", + estatus_len); + return; + } + + pr_info_once("Error records from previous boot:\n"); + + cper_estatus_print(KERN_INFO HW_ERR, estatus); + + /* + * Because the boot error source is "one-time polled" type, + * clear Block Status of current Generic Error Status Block, + * once it's printed. + */ + estatus->block_status = 0; + + estatus = (void *)estatus + estatus_len; + /* No more error records. */ + if (!estatus->block_status) + return; + + remain -= estatus_len; + } +} + +static int __init setup_bert_disable(char *str) +{ + bert_disable = 1; + + return 0; +} +__setup("bert_disable", setup_bert_disable); + +static int __init bert_check_table(struct acpi_table_bert *bert_tab) +{ + if (bert_tab->header.length < sizeof(struct acpi_table_bert) || + bert_tab->region_length < sizeof(struct acpi_bert_region)) + return -EINVAL; + + return 0; +} + +static int __init bert_init(void) +{ + struct acpi_bert_region *boot_error_region; + struct acpi_table_bert *bert_tab; + unsigned int region_len; + acpi_status status; + int rc = 0; + + if (acpi_disabled) + return 0; + + if (bert_disable) { + pr_info("Boot Error Record Table support is disabled.\n"); + return 0; + } + + status = acpi_get_table(ACPI_SIG_BERT, 0, (struct acpi_table_header **)&bert_tab); + if (status == AE_NOT_FOUND) + return 0; + + if (ACPI_FAILURE(status)) { + pr_err("get table failed, %s.\n", acpi_format_exception(status)); + return -EINVAL; + } + + rc = bert_check_table(bert_tab); + if (rc) { + pr_err(FW_BUG "table invalid.\n"); + return rc; + } + + region_len = bert_tab->region_length; + if (!request_mem_region(bert_tab->address, region_len, "APEI BERT")) { + pr_err("Can't request iomem region <%016llx-%016llx>.\n", + (unsigned long long)bert_tab->address, + (unsigned long long)bert_tab->address + region_len - 1); + return -EIO; + } + + boot_error_region = ioremap_cache(bert_tab->address, region_len); + if (boot_error_region) { + bert_print_all(boot_error_region, region_len); + iounmap(boot_error_region); + } else { + rc = -ENOMEM; + } + + release_mem_region(bert_tab->address, region_len); + + return rc; +} + +late_initcall(bert_init); diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c index 559c1173de1c..eebb7e39c49c 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj.c @@ -33,7 +33,8 @@ #include "apei-internal.h" -#define EINJ_PFX "EINJ: " +#undef pr_fmt +#define pr_fmt(fmt) "EINJ: " fmt #define SPIN_UNIT 100 /* 100ns */ /* Firmware should respond within 1 milliseconds */ @@ -179,8 +180,7 @@ static int einj_get_available_error_type(u32 *type) static int einj_timedout(u64 *t) { if ((s64)*t < SPIN_UNIT) { - pr_warning(FW_WARN EINJ_PFX - "Firmware does not respond in time\n"); + pr_warning(FW_WARN "Firmware does not respond in time\n"); return 1; } *t -= SPIN_UNIT; @@ -307,8 +307,7 @@ static int __einj_error_trigger(u64 trigger_paddr, u32 type, r = request_mem_region(trigger_paddr, sizeof(*trigger_tab), "APEI EINJ Trigger Table"); if (!r) { - pr_err(EINJ_PFX - "Can not request [mem %#010llx-%#010llx] for Trigger table\n", + pr_err("Can not request [mem %#010llx-%#010llx] for Trigger table\n", (unsigned long long)trigger_paddr, (unsigned long long)trigger_paddr + sizeof(*trigger_tab) - 1); @@ -316,13 +315,12 @@ static int __einj_error_trigger(u64 trigger_paddr, u32 type, } trigger_tab = ioremap_cache(trigger_paddr, sizeof(*trigger_tab)); if (!trigger_tab) { - pr_err(EINJ_PFX "Failed to map trigger table!\n"); + pr_err("Failed to map trigger table!\n"); goto out_rel_header; } rc = einj_check_trigger_header(trigger_tab); if (rc) { - pr_warning(FW_BUG EINJ_PFX - "The trigger error action table is invalid\n"); + pr_warning(FW_BUG "Invalid trigger error action table.\n"); goto out_rel_header; } @@ -336,8 +334,7 @@ static int __einj_error_trigger(u64 trigger_paddr, u32 type, table_size - sizeof(*trigger_tab), "APEI EINJ Trigger Table"); if (!r) { - pr_err(EINJ_PFX -"Can not request [mem %#010llx-%#010llx] for Trigger Table Entry\n", + pr_err("Can not request [mem %#010llx-%#010llx] for Trigger Table Entry\n", (unsigned long long)trigger_paddr + sizeof(*trigger_tab), (unsigned long long)trigger_paddr + table_size - 1); goto out_rel_header; @@ -345,7 +342,7 @@ static int __einj_error_trigger(u64 trigger_paddr, u32 type, iounmap(trigger_tab); trigger_tab = ioremap_cache(trigger_paddr, table_size); if (!trigger_tab) { - pr_err(EINJ_PFX "Failed to map trigger table!\n"); + pr_err("Failed to map trigger table!\n"); goto out_rel_entry; } trigger_entry = (struct acpi_whea_header *) @@ -695,34 +692,42 @@ static int __init einj_init(void) struct dentry *fentry; struct apei_exec_context ctx; - if (acpi_disabled) + if (acpi_disabled) { + pr_warn("ACPI disabled.\n"); return -ENODEV; + } status = acpi_get_table(ACPI_SIG_EINJ, 0, (struct acpi_table_header **)&einj_tab); - if (status == AE_NOT_FOUND) + if (status == AE_NOT_FOUND) { + pr_warn("EINJ table not found.\n"); return -ENODEV; + } else if (ACPI_FAILURE(status)) { - const char *msg = acpi_format_exception(status); - pr_err(EINJ_PFX "Failed to get table, %s\n", msg); + pr_err("Failed to get EINJ table: %s\n", + acpi_format_exception(status)); return -EINVAL; } rc = einj_check_table(einj_tab); if (rc) { - pr_warning(FW_BUG EINJ_PFX "EINJ table is invalid\n"); + pr_warn(FW_BUG "Invalid EINJ table.n"); return -EINVAL; } rc = -ENOMEM; einj_debug_dir = debugfs_create_dir("einj", apei_get_debugfs_dir()); - if (!einj_debug_dir) + if (!einj_debug_dir) { + pr_err("Error creating debugfs node.\n"); goto err_cleanup; + } + fentry = debugfs_create_file("available_error_type", S_IRUSR, einj_debug_dir, NULL, &available_error_type_fops); if (!fentry) goto err_cleanup; + fentry = debugfs_create_file("error_type", S_IRUSR | S_IWUSR, einj_debug_dir, NULL, &error_type_fops); if (!fentry) @@ -735,14 +740,22 @@ static int __init einj_init(void) apei_resources_init(&einj_resources); einj_exec_ctx_init(&ctx); rc = apei_exec_collect_resources(&ctx, &einj_resources); - if (rc) + if (rc) { + pr_err("Error collecting EINJ resources.\n"); goto err_fini; + } + rc = apei_resources_request(&einj_resources, "APEI EINJ"); - if (rc) + if (rc) { + pr_err("Error requesting memory/port resources.\n"); goto err_fini; + } + rc = apei_exec_pre_map_gars(&ctx); - if (rc) + if (rc) { + pr_err("Error pre-mapping GARs.\n"); goto err_release; + } rc = -ENOMEM; einj_param = einj_get_parameter_address(); @@ -787,7 +800,7 @@ static int __init einj_init(void) goto err_unmap; } - pr_info(EINJ_PFX "Error INJection is initialized.\n"); + pr_info("Error INJection is initialized.\n"); return 0; @@ -798,6 +811,7 @@ err_unmap: sizeof(struct einj_parameter); acpi_os_unmap_iomem(einj_param, size); + pr_err("Error creating param extension debugfs nodes.\n"); } apei_exec_post_unmap_gars(&ctx); err_release: @@ -805,6 +819,7 @@ err_release: err_fini: apei_resources_fini(&einj_resources); err_cleanup: + pr_err("Error creating primary debugfs nodes.\n"); debugfs_remove_recursive(einj_debug_dir); return rc; diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 262ca31b86d9..85b7d07fe5c8 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -30,6 +30,9 @@ #include <linux/acpi.h> #include <linux/slab.h> #include <linux/regulator/machine.h> +#include <linux/workqueue.h> +#include <linux/reboot.h> +#include <linux/delay.h> #ifdef CONFIG_X86 #include <asm/mpspec.h> #endif @@ -174,22 +177,17 @@ void acpi_bus_detach_private_data(acpi_handle handle) EXPORT_SYMBOL_GPL(acpi_bus_detach_private_data); static void acpi_print_osc_error(acpi_handle handle, - struct acpi_osc_context *context, char *error) + struct acpi_osc_context *context, char *error) { - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER}; int i; - if (ACPI_FAILURE(acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer))) - printk(KERN_DEBUG "%s: %s\n", context->uuid_str, error); - else { - printk(KERN_DEBUG "%s (%s): %s\n", - (char *)buffer.pointer, context->uuid_str, error); - kfree(buffer.pointer); - } - printk(KERN_DEBUG "_OSC request data:"); + acpi_handle_debug(handle, "(%s): %s\n", context->uuid_str, error); + + pr_debug("_OSC request data:"); for (i = 0; i < context->cap.length; i += sizeof(u32)) - printk(" %x", *((u32 *)(context->cap.pointer + i))); - printk("\n"); + pr_debug(" %x", *((u32 *)(context->cap.pointer + i))); + + pr_debug("\n"); } acpi_status acpi_str_to_uuid(char *str, u8 *uuid) @@ -302,6 +300,14 @@ out_kfree: EXPORT_SYMBOL(acpi_run_osc); bool osc_sb_apei_support_acked; + +/* + * ACPI 6.0 Section 8.4.4.2 Idle State Coordination + * OSPM supports platform coordinated low power idle(LPI) states + */ +bool osc_pc_lpi_support_confirmed; +EXPORT_SYMBOL_GPL(osc_pc_lpi_support_confirmed); + static u8 sb_uuid_str[] = "0811B06E-4A27-44F9-8D60-3CBBC22E7B48"; static void acpi_bus_osc_support(void) { @@ -322,6 +328,7 @@ static void acpi_bus_osc_support(void) capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PPC_OST_SUPPORT; capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_HOTPLUG_OST_SUPPORT; + capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PCLPI_SUPPORT; if (!ghes_disable) capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_APEI_SUPPORT; @@ -329,9 +336,12 @@ static void acpi_bus_osc_support(void) return; if (ACPI_SUCCESS(acpi_run_osc(handle, &context))) { u32 *capbuf_ret = context.ret.pointer; - if (context.ret.length > OSC_SUPPORT_DWORD) + if (context.ret.length > OSC_SUPPORT_DWORD) { osc_sb_apei_support_acked = capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_APEI_SUPPORT; + osc_pc_lpi_support_confirmed = + capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_PCLPI_SUPPORT; + } kfree(context.ret.pointer); } /* do we need to check other returned cap? Sounds no */ @@ -475,6 +485,56 @@ static void acpi_device_remove_notify_handler(struct acpi_device *device) acpi_device_notify); } +/* Handle events targeting \_SB device (at present only graceful shutdown) */ + +#define ACPI_SB_NOTIFY_SHUTDOWN_REQUEST 0x81 +#define ACPI_SB_INDICATE_INTERVAL 10000 + +static void sb_notify_work(struct work_struct *dummy) +{ + acpi_handle sb_handle; + + orderly_poweroff(true); + + /* + * After initiating graceful shutdown, the ACPI spec requires OSPM + * to evaluate _OST method once every 10seconds to indicate that + * the shutdown is in progress + */ + acpi_get_handle(NULL, "\\_SB", &sb_handle); + while (1) { + pr_info("Graceful shutdown in progress.\n"); + acpi_evaluate_ost(sb_handle, ACPI_OST_EC_OSPM_SHUTDOWN, + ACPI_OST_SC_OS_SHUTDOWN_IN_PROGRESS, NULL); + msleep(ACPI_SB_INDICATE_INTERVAL); + } +} + +static void acpi_sb_notify(acpi_handle handle, u32 event, void *data) +{ + static DECLARE_WORK(acpi_sb_work, sb_notify_work); + + if (event == ACPI_SB_NOTIFY_SHUTDOWN_REQUEST) { + if (!work_busy(&acpi_sb_work)) + schedule_work(&acpi_sb_work); + } else + pr_warn("event %x is not supported by \\_SB device\n", event); +} + +static int __init acpi_setup_sb_notify_handler(void) +{ + acpi_handle sb_handle; + + if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &sb_handle))) + return -ENXIO; + + if (ACPI_FAILURE(acpi_install_notify_handler(sb_handle, ACPI_DEVICE_NOTIFY, + acpi_sb_notify, NULL))) + return -EINVAL; + + return 0; +} + /* -------------------------------------------------------------------------- Device Matching -------------------------------------------------------------------------- */ @@ -961,8 +1021,7 @@ void __init acpi_early_init(void) /** * acpi_subsystem_init - Finalize the early initialization of ACPI. * - * Switch over the platform to the ACPI mode (if possible), initialize the - * handling of ACPI events, install the interrupt and global lock handlers. + * Switch over the platform to the ACPI mode (if possible). * * Doing this too early is generally unsafe, but at the same time it needs to be * done before all things that really depend on ACPI. The right spot appears to @@ -990,6 +1049,13 @@ void __init acpi_subsystem_init(void) } } +static acpi_status acpi_bus_table_handler(u32 event, void *table, void *context) +{ + acpi_scan_table_handler(event, table, context); + + return acpi_sysfs_table_handler(event, table, context); +} + static int __init acpi_bus_init(void) { int result; @@ -1043,6 +1109,8 @@ static int __init acpi_bus_init(void) * _PDC control method may load dynamic SSDT tables, * and we need to install the table handler before that. */ + status = acpi_install_table_handler(acpi_bus_table_handler, NULL); + acpi_sysfs_init(); acpi_early_processor_set_pdc(); @@ -1124,6 +1192,7 @@ static int __init acpi_init(void) acpi_sleep_proc_init(); acpi_wakeup_device_init(); acpi_debugger_init(); + acpi_setup_sb_notify_handler(); return 0; } diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 5c3b0918d5fd..148f4e5ca104 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -53,6 +53,10 @@ #define ACPI_BUTTON_DEVICE_NAME_LID "Lid Switch" #define ACPI_BUTTON_TYPE_LID 0x05 +#define ACPI_BUTTON_LID_INIT_IGNORE 0x00 +#define ACPI_BUTTON_LID_INIT_OPEN 0x01 +#define ACPI_BUTTON_LID_INIT_METHOD 0x02 + #define _COMPONENT ACPI_BUTTON_COMPONENT ACPI_MODULE_NAME("button"); @@ -105,6 +109,7 @@ struct acpi_button { static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier); static struct acpi_device *lid_device; +static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD; /* -------------------------------------------------------------------------- FS Interface (/proc) @@ -113,16 +118,52 @@ static struct acpi_device *lid_device; static struct proc_dir_entry *acpi_button_dir; static struct proc_dir_entry *acpi_lid_dir; +static int acpi_lid_evaluate_state(struct acpi_device *device) +{ + unsigned long long lid_state; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "_LID", NULL, &lid_state); + if (ACPI_FAILURE(status)) + return -ENODEV; + + return lid_state ? 1 : 0; +} + +static int acpi_lid_notify_state(struct acpi_device *device, int state) +{ + struct acpi_button *button = acpi_driver_data(device); + int ret; + + /* input layer checks if event is redundant */ + input_report_switch(button->input, SW_LID, !state); + input_sync(button->input); + + if (state) + pm_wakeup_event(&device->dev, 0); + + ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device); + if (ret == NOTIFY_DONE) + ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, + device); + if (ret == NOTIFY_DONE || ret == NOTIFY_OK) { + /* + * It is also regarded as success if the notifier_chain + * returns NOTIFY_OK or NOTIFY_DONE. + */ + ret = 0; + } + return ret; +} + static int acpi_button_state_seq_show(struct seq_file *seq, void *offset) { struct acpi_device *device = seq->private; - acpi_status status; - unsigned long long state; + int state; - status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state); + state = acpi_lid_evaluate_state(device); seq_printf(seq, "state: %s\n", - ACPI_FAILURE(status) ? "unsupported" : - (state ? "open" : "closed")); + state < 0 ? "unsupported" : (state ? "open" : "closed")); return 0; } @@ -231,51 +272,37 @@ EXPORT_SYMBOL(acpi_lid_notifier_unregister); int acpi_lid_open(void) { - acpi_status status; - unsigned long long state; - if (!lid_device) return -ENODEV; - status = acpi_evaluate_integer(lid_device->handle, "_LID", NULL, - &state); - if (ACPI_FAILURE(status)) - return -ENODEV; - - return !!state; + return acpi_lid_evaluate_state(lid_device); } EXPORT_SYMBOL(acpi_lid_open); -static int acpi_lid_send_state(struct acpi_device *device) +static int acpi_lid_update_state(struct acpi_device *device) { - struct acpi_button *button = acpi_driver_data(device); - unsigned long long state; - acpi_status status; - int ret; - - status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state); - if (ACPI_FAILURE(status)) - return -ENODEV; + int state; - /* input layer checks if event is redundant */ - input_report_switch(button->input, SW_LID, !state); - input_sync(button->input); + state = acpi_lid_evaluate_state(device); + if (state < 0) + return state; - if (state) - pm_wakeup_event(&device->dev, 0); + return acpi_lid_notify_state(device, state); +} - ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device); - if (ret == NOTIFY_DONE) - ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, - device); - if (ret == NOTIFY_DONE || ret == NOTIFY_OK) { - /* - * It is also regarded as success if the notifier_chain - * returns NOTIFY_OK or NOTIFY_DONE. - */ - ret = 0; +static void acpi_lid_initialize_state(struct acpi_device *device) +{ + switch (lid_init_state) { + case ACPI_BUTTON_LID_INIT_OPEN: + (void)acpi_lid_notify_state(device, 1); + break; + case ACPI_BUTTON_LID_INIT_METHOD: + (void)acpi_lid_update_state(device); + break; + case ACPI_BUTTON_LID_INIT_IGNORE: + default: + break; } - return ret; } static void acpi_button_notify(struct acpi_device *device, u32 event) @@ -290,7 +317,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) case ACPI_BUTTON_NOTIFY_STATUS: input = button->input; if (button->type == ACPI_BUTTON_TYPE_LID) { - acpi_lid_send_state(device); + acpi_lid_update_state(device); } else { int keycode; @@ -335,7 +362,7 @@ static int acpi_button_resume(struct device *dev) button->suspended = false; if (button->type == ACPI_BUTTON_TYPE_LID) - return acpi_lid_send_state(device); + acpi_lid_initialize_state(device); return 0; } #endif @@ -416,7 +443,7 @@ static int acpi_button_add(struct acpi_device *device) if (error) goto err_remove_fs; if (button->type == ACPI_BUTTON_TYPE_LID) { - acpi_lid_send_state(device); + acpi_lid_initialize_state(device); /* * This assumes there's only one lid device, or if there are * more we only care about the last one... @@ -446,4 +473,42 @@ static int acpi_button_remove(struct acpi_device *device) return 0; } +static int param_set_lid_init_state(const char *val, struct kernel_param *kp) +{ + int result = 0; + + if (!strncmp(val, "open", sizeof("open") - 1)) { + lid_init_state = ACPI_BUTTON_LID_INIT_OPEN; + pr_info("Notify initial lid state as open\n"); + } else if (!strncmp(val, "method", sizeof("method") - 1)) { + lid_init_state = ACPI_BUTTON_LID_INIT_METHOD; + pr_info("Notify initial lid state with _LID return value\n"); + } else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) { + lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE; + pr_info("Do not notify initial lid state\n"); + } else + result = -EINVAL; + return result; +} + +static int param_get_lid_init_state(char *buffer, struct kernel_param *kp) +{ + switch (lid_init_state) { + case ACPI_BUTTON_LID_INIT_OPEN: + return sprintf(buffer, "open"); + case ACPI_BUTTON_LID_INIT_METHOD: + return sprintf(buffer, "method"); + case ACPI_BUTTON_LID_INIT_IGNORE: + return sprintf(buffer, "ignore"); + default: + return sprintf(buffer, "invalid"); + } + return 0; +} + +module_param_call(lid_init_state, + param_set_lid_init_state, param_get_lid_init_state, + NULL, 0644); +MODULE_PARM_DESC(lid_init_state, "Behavior for reporting LID initial state"); + module_acpi_driver(acpi_button_driver); diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index 8adac69dba3d..2e981732805b 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -299,8 +299,10 @@ int acpi_get_psd_map(struct cpudata **all_cpu_data) continue; cpc_ptr = per_cpu(cpc_desc_ptr, i); - if (!cpc_ptr) - continue; + if (!cpc_ptr) { + retval = -EFAULT; + goto err_ret; + } pdomain = &(cpc_ptr->domain_info); cpumask_set_cpu(i, pr->shared_cpu_map); @@ -322,8 +324,10 @@ int acpi_get_psd_map(struct cpudata **all_cpu_data) continue; match_cpc_ptr = per_cpu(cpc_desc_ptr, j); - if (!match_cpc_ptr) - continue; + if (!match_cpc_ptr) { + retval = -EFAULT; + goto err_ret; + } match_pdomain = &(match_cpc_ptr->domain_info); if (match_pdomain->domain != pdomain->domain) @@ -353,8 +357,10 @@ int acpi_get_psd_map(struct cpudata **all_cpu_data) continue; match_cpc_ptr = per_cpu(cpc_desc_ptr, j); - if (!match_cpc_ptr) - continue; + if (!match_cpc_ptr) { + retval = -EFAULT; + goto err_ret; + } match_pdomain = &(match_cpc_ptr->domain_info); if (match_pdomain->domain != pdomain->domain) @@ -595,9 +601,6 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) /* Store CPU Logical ID */ cpc_ptr->cpu_id = pr->id; - /* Plug it into this CPUs CPC descriptor. */ - per_cpu(cpc_desc_ptr, pr->id) = cpc_ptr; - /* Parse PSD data for this CPU */ ret = acpi_get_psd(cpc_ptr, handle); if (ret) @@ -610,6 +613,9 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) goto out_free; } + /* Plug PSD data into this CPUs CPC descriptor. */ + per_cpu(cpc_desc_ptr, pr->id) = cpc_ptr; + /* Everything looks okay */ pr_debug("Parsed CPC struct for CPU: %d\n", pr->id); diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index e8e128dede29..0c00208b423e 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -21,7 +21,7 @@ */ #include <linux/kernel.h> -#include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/types.h> @@ -33,12 +33,7 @@ #include "internal.h" -#define ACPI_DOCK_DRIVER_DESCRIPTION "ACPI Dock Station Driver" - ACPI_MODULE_NAME("dock"); -MODULE_AUTHOR("Kristen Carlson Accardi"); -MODULE_DESCRIPTION(ACPI_DOCK_DRIVER_DESCRIPTION); -MODULE_LICENSE("GPL"); static bool immediate_undock = 1; module_param(immediate_undock, bool, 0644); diff --git a/drivers/acpi/dptf/Kconfig b/drivers/acpi/dptf/Kconfig new file mode 100644 index 000000000000..ac0a6ed0cf46 --- /dev/null +++ b/drivers/acpi/dptf/Kconfig @@ -0,0 +1,15 @@ +config DPTF_POWER + tristate "DPTF Platform Power Participant" + depends on X86 + help + This driver adds support for Dynamic Platform and Thermal Framework + (DPTF) Platform Power Participant device (INT3407) support. + This participant is responsible for exposing platform telemetry: + max_platform_power + platform_power_source + adapter_rating + battery_steady_power + charger_type + + To compile this driver as a module, choose M here: + the module will be called dptf_power. diff --git a/drivers/acpi/dptf/Makefile b/drivers/acpi/dptf/Makefile new file mode 100644 index 000000000000..06ea8809583d --- /dev/null +++ b/drivers/acpi/dptf/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_ACPI) += int340x_thermal.o +obj-$(CONFIG_DPTF_POWER) += dptf_power.o + +ccflags-y += -Idrivers/acpi diff --git a/drivers/acpi/dptf/dptf_power.c b/drivers/acpi/dptf/dptf_power.c new file mode 100644 index 000000000000..734642dc5008 --- /dev/null +++ b/drivers/acpi/dptf/dptf_power.c @@ -0,0 +1,128 @@ +/* + * dptf_power: DPTF platform power driver + * Copyright (c) 2016, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/platform_device.h> + +/* + * Presentation of attributes which are defined for INT3407. They are: + * PMAX : Maximum platform powe + * PSRC : Platform power source + * ARTG : Adapter rating + * CTYP : Charger type + * PBSS : Battery steady power + */ +#define DPTF_POWER_SHOW(name, object) \ +static ssize_t name##_show(struct device *dev,\ + struct device_attribute *attr,\ + char *buf)\ +{\ + struct platform_device *pdev = to_platform_device(dev);\ + struct acpi_device *acpi_dev = platform_get_drvdata(pdev);\ + unsigned long long val;\ + acpi_status status;\ +\ + status = acpi_evaluate_integer(acpi_dev->handle, #object,\ + NULL, &val);\ + if (ACPI_SUCCESS(status))\ + return sprintf(buf, "%d\n", (int)val);\ + else \ + return -EINVAL;\ +} + +DPTF_POWER_SHOW(max_platform_power_mw, PMAX) +DPTF_POWER_SHOW(platform_power_source, PSRC) +DPTF_POWER_SHOW(adapter_rating_mw, ARTG) +DPTF_POWER_SHOW(battery_steady_power_mw, PBSS) +DPTF_POWER_SHOW(charger_type, CTYP) + +static DEVICE_ATTR_RO(max_platform_power_mw); +static DEVICE_ATTR_RO(platform_power_source); +static DEVICE_ATTR_RO(adapter_rating_mw); +static DEVICE_ATTR_RO(battery_steady_power_mw); +static DEVICE_ATTR_RO(charger_type); + +static struct attribute *dptf_power_attrs[] = { + &dev_attr_max_platform_power_mw.attr, + &dev_attr_platform_power_source.attr, + &dev_attr_adapter_rating_mw.attr, + &dev_attr_battery_steady_power_mw.attr, + &dev_attr_charger_type.attr, + NULL +}; + +static struct attribute_group dptf_power_attribute_group = { + .attrs = dptf_power_attrs, + .name = "dptf_power" +}; + +static int dptf_power_add(struct platform_device *pdev) +{ + struct acpi_device *acpi_dev; + acpi_status status; + unsigned long long ptype; + int result; + + acpi_dev = ACPI_COMPANION(&(pdev->dev)); + if (!acpi_dev) + return -ENODEV; + + status = acpi_evaluate_integer(acpi_dev->handle, "PTYP", NULL, &ptype); + if (ACPI_FAILURE(status)) + return -ENODEV; + + if (ptype != 0x11) + return -ENODEV; + + result = sysfs_create_group(&pdev->dev.kobj, + &dptf_power_attribute_group); + if (result) + return result; + + platform_set_drvdata(pdev, acpi_dev); + + return 0; +} + +static int dptf_power_remove(struct platform_device *pdev) +{ + + sysfs_remove_group(&pdev->dev.kobj, &dptf_power_attribute_group); + + return 0; +} + +static const struct acpi_device_id int3407_device_ids[] = { + {"INT3407", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, int3407_device_ids); + +static struct platform_driver dptf_power_driver = { + .probe = dptf_power_add, + .remove = dptf_power_remove, + .driver = { + .name = "DPTF Platform Power", + .acpi_match_table = int3407_device_ids, + }, +}; + +module_platform_driver(dptf_power_driver); + +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("ACPI DPTF platform power driver"); diff --git a/drivers/acpi/int340x_thermal.c b/drivers/acpi/dptf/int340x_thermal.c index 33505c651f62..33505c651f62 100644 --- a/drivers/acpi/int340x_thermal.c +++ b/drivers/acpi/dptf/int340x_thermal.c diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 290d6f5be44b..999a10914678 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1359,13 +1359,9 @@ static void ec_remove_handlers(struct acpi_ec *ec) } } -static int acpi_ec_add(struct acpi_device *device) +static struct acpi_ec *acpi_ec_alloc(void) { - struct acpi_ec *ec = NULL; - int ret; - - strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME); - strcpy(acpi_device_class(device), ACPI_EC_CLASS); + struct acpi_ec *ec; /* Check for boot EC */ if (boot_ec) { @@ -1376,9 +1372,21 @@ static int acpi_ec_add(struct acpi_device *device) first_ec = NULL; } else { ec = make_acpi_ec(); - if (!ec) - return -ENOMEM; } + return ec; +} + +static int acpi_ec_add(struct acpi_device *device) +{ + struct acpi_ec *ec = NULL; + int ret; + + strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME); + strcpy(acpi_device_class(device), ACPI_EC_CLASS); + + ec = acpi_ec_alloc(); + if (!ec) + return -ENOMEM; if (ec_parse_device(device->handle, 0, ec, NULL) != AE_CTRL_TERMINATE) { kfree(ec); @@ -1465,27 +1473,31 @@ static const struct acpi_device_id ec_device_ids[] = { int __init acpi_ec_dsdt_probe(void) { acpi_status status; + struct acpi_ec *ec; + int ret; - if (boot_ec) - return 0; - + ec = acpi_ec_alloc(); + if (!ec) + return -ENOMEM; /* * Finding EC from DSDT if there is no ECDT EC available. When this * function is invoked, ACPI tables have been fully loaded, we can * walk namespace now. */ - boot_ec = make_acpi_ec(); - if (!boot_ec) - return -ENOMEM; status = acpi_get_devices(ec_device_ids[0].id, - ec_parse_device, boot_ec, NULL); - if (ACPI_FAILURE(status) || !boot_ec->handle) - return -ENODEV; - if (!ec_install_handlers(boot_ec)) { - first_ec = boot_ec; - return 0; + ec_parse_device, ec, NULL); + if (ACPI_FAILURE(status) || !ec->handle) { + ret = -ENODEV; + goto error; } - return -EFAULT; + ret = ec_install_handlers(ec); + +error: + if (ret) + kfree(ec); + else + first_ec = boot_ec = ec; + return ret; } #if 0 @@ -1529,6 +1541,11 @@ static int ec_clear_on_resume(const struct dmi_system_id *id) return 0; } +/* + * Some ECDTs contain wrong register addresses. + * MSI MS-171F + * https://bugzilla.kernel.org/show_bug.cgi?id=12461 + */ static int ec_correct_ecdt(const struct dmi_system_id *id) { pr_debug("Detected system needing ECDT address correction.\n"); @@ -1538,16 +1555,6 @@ static int ec_correct_ecdt(const struct dmi_system_id *id) static struct dmi_system_id ec_dmi_table[] __initdata = { { - ec_correct_ecdt, "Asus L4R", { - DMI_MATCH(DMI_BIOS_VERSION, "1008.006"), - DMI_MATCH(DMI_PRODUCT_NAME, "L4R"), - DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL}, - { - ec_correct_ecdt, "Asus M6R", { - DMI_MATCH(DMI_BIOS_VERSION, "0207"), - DMI_MATCH(DMI_PRODUCT_NAME, "M6R"), - DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL}, - { ec_correct_ecdt, "MSI MS-171F", { DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star"), DMI_MATCH(DMI_PRODUCT_NAME, "MS-171F"),}, NULL}, @@ -1559,12 +1566,13 @@ static struct dmi_system_id ec_dmi_table[] __initdata = { int __init acpi_ec_ecdt_probe(void) { - int ret = 0; + int ret; acpi_status status; struct acpi_table_ecdt *ecdt_ptr; + struct acpi_ec *ec; - boot_ec = make_acpi_ec(); - if (!boot_ec) + ec = acpi_ec_alloc(); + if (!ec) return -ENOMEM; /* * Generate a boot ec context @@ -1588,28 +1596,20 @@ int __init acpi_ec_ecdt_probe(void) pr_info("EC description table is found, configuring boot EC\n"); if (EC_FLAGS_CORRECT_ECDT) { - /* - * Asus L4R, Asus M6R - * https://bugzilla.kernel.org/show_bug.cgi?id=9399 - * MSI MS-171F - * https://bugzilla.kernel.org/show_bug.cgi?id=12461 - */ - boot_ec->command_addr = ecdt_ptr->data.address; - boot_ec->data_addr = ecdt_ptr->control.address; + ec->command_addr = ecdt_ptr->data.address; + ec->data_addr = ecdt_ptr->control.address; } else { - boot_ec->command_addr = ecdt_ptr->control.address; - boot_ec->data_addr = ecdt_ptr->data.address; + ec->command_addr = ecdt_ptr->control.address; + ec->data_addr = ecdt_ptr->data.address; } - boot_ec->gpe = ecdt_ptr->gpe; - boot_ec->handle = ACPI_ROOT_OBJECT; - ret = ec_install_handlers(boot_ec); - if (!ret) - first_ec = boot_ec; + ec->gpe = ecdt_ptr->gpe; + ec->handle = ACPI_ROOT_OBJECT; + ret = ec_install_handlers(ec); error: - if (ret) { - kfree(boot_ec); - boot_ec = NULL; - } + if (ret) + kfree(ec); + else + first_ec = boot_ec = ec; return ret; } diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 27cc7feabfe4..940218ff0193 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -87,6 +87,9 @@ bool acpi_queue_hotplug_work(struct work_struct *work); void acpi_device_hotplug(struct acpi_device *adev, u32 src); bool acpi_scan_is_offline(struct acpi_device *adev, bool uevent); +acpi_status acpi_sysfs_table_handler(u32 event, void *table, void *context); +void acpi_scan_table_handler(u32 event, void *table, void *context); + /* -------------------------------------------------------------------------- Device Node Initialization / Removal -------------------------------------------------------------------------- */ diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index d176e0ece470..ce3a7a16f03f 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -18,22 +18,21 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * */ + +#define pr_fmt(fmt) "ACPI: " fmt + #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/acpi.h> +#include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/numa.h> #include <linux/nodemask.h> #include <linux/topology.h> -#define PREFIX "ACPI: " - -#define ACPI_NUMA 0x80000000 -#define _COMPONENT ACPI_NUMA -ACPI_MODULE_NAME("numa"); - static nodemask_t nodes_found_map = NODE_MASK_NONE; /* maps to convert between proximity domain and logical node ID */ @@ -43,6 +42,7 @@ static int node_to_pxm_map[MAX_NUMNODES] = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; unsigned char acpi_srat_revision __initdata; +int acpi_numa __initdata; int pxm_to_node(int pxm) { @@ -128,68 +128,63 @@ EXPORT_SYMBOL(acpi_map_pxm_to_online_node); static void __init acpi_table_print_srat_entry(struct acpi_subtable_header *header) { - - ACPI_FUNCTION_NAME("acpi_table_print_srat_entry"); - - if (!header) - return; - switch (header->type) { - case ACPI_SRAT_TYPE_CPU_AFFINITY: -#ifdef ACPI_DEBUG_OUTPUT { struct acpi_srat_cpu_affinity *p = (struct acpi_srat_cpu_affinity *)header; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "SRAT Processor (id[0x%02x] eid[0x%02x]) in proximity domain %d %s\n", - p->apic_id, p->local_sapic_eid, - p->proximity_domain_lo, - (p->flags & ACPI_SRAT_CPU_ENABLED)? - "enabled" : "disabled")); + pr_debug("SRAT Processor (id[0x%02x] eid[0x%02x]) in proximity domain %d %s\n", + p->apic_id, p->local_sapic_eid, + p->proximity_domain_lo, + (p->flags & ACPI_SRAT_CPU_ENABLED) ? + "enabled" : "disabled"); } -#endif /* ACPI_DEBUG_OUTPUT */ break; case ACPI_SRAT_TYPE_MEMORY_AFFINITY: -#ifdef ACPI_DEBUG_OUTPUT { struct acpi_srat_mem_affinity *p = (struct acpi_srat_mem_affinity *)header; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "SRAT Memory (0x%lx length 0x%lx) in proximity domain %d %s%s%s\n", - (unsigned long)p->base_address, - (unsigned long)p->length, - p->proximity_domain, - (p->flags & ACPI_SRAT_MEM_ENABLED)? - "enabled" : "disabled", - (p->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)? - " hot-pluggable" : "", - (p->flags & ACPI_SRAT_MEM_NON_VOLATILE)? - " non-volatile" : "")); + pr_debug("SRAT Memory (0x%lx length 0x%lx) in proximity domain %d %s%s%s\n", + (unsigned long)p->base_address, + (unsigned long)p->length, + p->proximity_domain, + (p->flags & ACPI_SRAT_MEM_ENABLED) ? + "enabled" : "disabled", + (p->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ? + " hot-pluggable" : "", + (p->flags & ACPI_SRAT_MEM_NON_VOLATILE) ? + " non-volatile" : ""); } -#endif /* ACPI_DEBUG_OUTPUT */ break; case ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY: -#ifdef ACPI_DEBUG_OUTPUT { struct acpi_srat_x2apic_cpu_affinity *p = (struct acpi_srat_x2apic_cpu_affinity *)header; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "SRAT Processor (x2apicid[0x%08x]) in" - " proximity domain %d %s\n", - p->apic_id, - p->proximity_domain, - (p->flags & ACPI_SRAT_CPU_ENABLED) ? - "enabled" : "disabled")); + pr_debug("SRAT Processor (x2apicid[0x%08x]) in proximity domain %d %s\n", + p->apic_id, + p->proximity_domain, + (p->flags & ACPI_SRAT_CPU_ENABLED) ? + "enabled" : "disabled"); } -#endif /* ACPI_DEBUG_OUTPUT */ break; + + case ACPI_SRAT_TYPE_GICC_AFFINITY: + { + struct acpi_srat_gicc_affinity *p = + (struct acpi_srat_gicc_affinity *)header; + pr_debug("SRAT Processor (acpi id[0x%04x]) in proximity domain %d %s\n", + p->acpi_processor_uid, + p->proximity_domain, + (p->flags & ACPI_SRAT_GICC_ENABLED) ? + "enabled" : "disabled"); + } + break; + default: - printk(KERN_WARNING PREFIX - "Found unsupported SRAT entry (type = 0x%x)\n", - header->type); + pr_warn("Found unsupported SRAT entry (type = 0x%x)\n", + header->type); break; } } @@ -217,12 +212,117 @@ static int __init slit_valid(struct acpi_table_slit *slit) return 1; } +void __init bad_srat(void) +{ + pr_err("SRAT: SRAT not used.\n"); + acpi_numa = -1; +} + +int __init srat_disabled(void) +{ + return acpi_numa < 0; +} + +#if defined(CONFIG_X86) || defined(CONFIG_ARM64) +/* + * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for + * I/O localities since SRAT does not list them. I/O localities are + * not supported at this point. + */ +void __init acpi_numa_slit_init(struct acpi_table_slit *slit) +{ + int i, j; + + for (i = 0; i < slit->locality_count; i++) { + const int from_node = pxm_to_node(i); + + if (from_node == NUMA_NO_NODE) + continue; + + for (j = 0; j < slit->locality_count; j++) { + const int to_node = pxm_to_node(j); + + if (to_node == NUMA_NO_NODE) + continue; + + numa_set_distance(from_node, to_node, + slit->entry[slit->locality_count * i + j]); + } + } +} + +/* + * Default callback for parsing of the Proximity Domain <-> Memory + * Area mappings + */ +int __init +acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) +{ + u64 start, end; + u32 hotpluggable; + int node, pxm; + + if (srat_disabled()) + goto out_err; + if (ma->header.length < sizeof(struct acpi_srat_mem_affinity)) { + pr_err("SRAT: Unexpected header length: %d\n", + ma->header.length); + goto out_err_bad_srat; + } + if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0) + goto out_err; + hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE; + if (hotpluggable && !IS_ENABLED(CONFIG_MEMORY_HOTPLUG)) + goto out_err; + + start = ma->base_address; + end = start + ma->length; + pxm = ma->proximity_domain; + if (acpi_srat_revision <= 1) + pxm &= 0xff; + + node = acpi_map_pxm_to_node(pxm); + if (node == NUMA_NO_NODE || node >= MAX_NUMNODES) { + pr_err("SRAT: Too many proximity domains.\n"); + goto out_err_bad_srat; + } + + if (numa_add_memblk(node, start, end) < 0) { + pr_err("SRAT: Failed to add memblk to node %u [mem %#010Lx-%#010Lx]\n", + node, (unsigned long long) start, + (unsigned long long) end - 1); + goto out_err_bad_srat; + } + + node_set(node, numa_nodes_parsed); + + pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s%s\n", + node, pxm, + (unsigned long long) start, (unsigned long long) end - 1, + hotpluggable ? " hotplug" : "", + ma->flags & ACPI_SRAT_MEM_NON_VOLATILE ? " non-volatile" : ""); + + /* Mark hotplug range in memblock. */ + if (hotpluggable && memblock_mark_hotplug(start, ma->length)) + pr_warn("SRAT: Failed to mark hotplug range [mem %#010Lx-%#010Lx] in memblock\n", + (unsigned long long)start, (unsigned long long)end - 1); + + max_possible_pfn = max(max_possible_pfn, PFN_UP(end - 1)); + + return 0; +out_err_bad_srat: + bad_srat(); +out_err: + return -EINVAL; +} +#endif /* defined(CONFIG_X86) || defined (CONFIG_ARM64) */ + static int __init acpi_parse_slit(struct acpi_table_header *table) { struct acpi_table_slit *slit = (struct acpi_table_slit *)table; if (!slit_valid(slit)) { - printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n"); + pr_info("SLIT table looks invalid. Not used.\n"); return -EINVAL; } acpi_numa_slit_init(slit); @@ -233,12 +333,9 @@ static int __init acpi_parse_slit(struct acpi_table_header *table) void __init __weak acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) { - printk(KERN_WARNING PREFIX - "Found unsupported x2apic [0x%08x] SRAT entry\n", pa->apic_id); - return; + pr_warn("Found unsupported x2apic [0x%08x] SRAT entry\n", pa->apic_id); } - static int __init acpi_parse_x2apic_affinity(struct acpi_subtable_header *header, const unsigned long end) @@ -275,6 +372,24 @@ acpi_parse_processor_affinity(struct acpi_subtable_header *header, return 0; } +static int __init +acpi_parse_gicc_affinity(struct acpi_subtable_header *header, + const unsigned long end) +{ + struct acpi_srat_gicc_affinity *processor_affinity; + + processor_affinity = (struct acpi_srat_gicc_affinity *)header; + if (!processor_affinity) + return -EINVAL; + + acpi_table_print_srat_entry(header); + + /* let architecture-dependent part to do it */ + acpi_numa_gicc_affinity_init(processor_affinity); + + return 0; +} + static int __initdata parsed_numa_memblks; static int __init @@ -319,6 +434,9 @@ int __init acpi_numa_init(void) { int cnt = 0; + if (acpi_disabled) + return -EINVAL; + /* * Should not limit number with cpu num that is from NR_CPUS or nr_cpus= * SRAT cpu entries could have different order with that in MADT. @@ -327,13 +445,15 @@ int __init acpi_numa_init(void) /* SRAT: Static Resource Affinity Table */ if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) { - struct acpi_subtable_proc srat_proc[2]; + struct acpi_subtable_proc srat_proc[3]; memset(srat_proc, 0, sizeof(srat_proc)); srat_proc[0].id = ACPI_SRAT_TYPE_CPU_AFFINITY; srat_proc[0].handler = acpi_parse_processor_affinity; srat_proc[1].id = ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY; srat_proc[1].handler = acpi_parse_x2apic_affinity; + srat_proc[2].id = ACPI_SRAT_TYPE_GICC_AFFINITY; + srat_proc[2].handler = acpi_parse_gicc_affinity; acpi_table_parse_entries_array(ACPI_SIG_SRAT, sizeof(struct acpi_table_srat), @@ -347,8 +467,6 @@ int __init acpi_numa_init(void) /* SLIT: System Locality Information Table */ acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit); - acpi_numa_arch_fixup(); - if (cnt < 0) return cnt; else if (!parsed_numa_memblks) diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c index 7188e53b6b7c..f62c68e24317 100644 --- a/drivers/acpi/pci_slot.c +++ b/drivers/acpi/pci_slot.c @@ -22,8 +22,9 @@ * General Public License for more details. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> -#include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/types.h> @@ -33,30 +34,11 @@ #include <linux/dmi.h> #include <linux/pci-acpi.h> -static bool debug; static int check_sta_before_sun; -#define DRIVER_VERSION "0.1" -#define DRIVER_AUTHOR "Alex Chiang <achiang@hp.com>" -#define DRIVER_DESC "ACPI PCI Slot Detection Driver" -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); -MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); -module_param(debug, bool, 0644); - #define _COMPONENT ACPI_PCI_COMPONENT ACPI_MODULE_NAME("pci_slot"); -#define MY_NAME "pci_slot" -#define err(format, arg...) pr_err("%s: " format , MY_NAME , ## arg) -#define info(format, arg...) pr_info("%s: " format , MY_NAME , ## arg) -#define dbg(format, arg...) \ - do { \ - if (debug) \ - pr_debug("%s: " format, MY_NAME , ## arg); \ - } while (0) - #define SLOT_NAME_SIZE 21 /* Inspired by #define in acpiphp.h */ struct acpi_pci_slot { @@ -76,7 +58,7 @@ check_slot(acpi_handle handle, unsigned long long *sun) struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); - dbg("Checking slot on path: %s\n", (char *)buffer.pointer); + pr_debug("Checking slot on path: %s\n", (char *)buffer.pointer); if (check_sta_before_sun) { /* If SxFy doesn't have _STA, we just assume it's there */ @@ -87,14 +69,16 @@ check_slot(acpi_handle handle, unsigned long long *sun) status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr); if (ACPI_FAILURE(status)) { - dbg("_ADR returned %d on %s\n", status, (char *)buffer.pointer); + pr_debug("_ADR returned %d on %s\n", + status, (char *)buffer.pointer); goto out; } /* No _SUN == not a slot == bail */ status = acpi_evaluate_integer(handle, "_SUN", NULL, sun); if (ACPI_FAILURE(status)) { - dbg("_SUN returned %d on %s\n", status, (char *)buffer.pointer); + pr_debug("_SUN returned %d on %s\n", + status, (char *)buffer.pointer); goto out; } @@ -132,15 +116,13 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) } slot = kmalloc(sizeof(*slot), GFP_KERNEL); - if (!slot) { - err("%s: cannot allocate memory\n", __func__); + if (!slot) return AE_OK; - } snprintf(name, sizeof(name), "%llu", sun); pci_slot = pci_create_slot(pci_bus, device, name, NULL); if (IS_ERR(pci_slot)) { - err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot)); + pr_err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot)); kfree(slot); return AE_OK; } @@ -150,8 +132,8 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) get_device(&pci_bus->dev); - dbg("pci_slot: %p, pci_bus: %x, device: %d, name: %s\n", - pci_slot, pci_bus->number, device, name); + pr_debug("%p, pci_bus: %x, device: %d, name: %s\n", + pci_slot, pci_bus->number, device, name); return AE_OK; } @@ -186,7 +168,8 @@ void acpi_pci_slot_remove(struct pci_bus *bus) static int do_sta_before_sun(const struct dmi_system_id *d) { - info("%s detected: will evaluate _STA before calling _SUN\n", d->ident); + pr_info("%s detected: will evaluate _STA before calling _SUN\n", + d->ident); check_sta_before_sun = 1; return 0; } diff --git a/drivers/acpi/pmic/intel_pmic.c b/drivers/acpi/pmic/intel_pmic.c index bd772cd56494..ca18e0d23df9 100644 --- a/drivers/acpi/pmic/intel_pmic.c +++ b/drivers/acpi/pmic/intel_pmic.c @@ -13,7 +13,7 @@ * GNU General Public License for more details. */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/acpi.h> #include <linux/regmap.h> #include <acpi/acpi_lpat.h> @@ -21,12 +21,19 @@ #define PMIC_POWER_OPREGION_ID 0x8d #define PMIC_THERMAL_OPREGION_ID 0x8c +#define PMIC_REGS_OPREGION_ID 0x8f + +struct intel_pmic_regs_handler_ctx { + unsigned int val; + u16 addr; +}; struct intel_pmic_opregion { struct mutex lock; struct acpi_lpat_conversion_table *lpat_table; struct regmap *regmap; struct intel_pmic_opregion_data *data; + struct intel_pmic_regs_handler_ctx ctx; }; static int pmic_get_reg_bit(int address, struct pmic_table *table, @@ -131,7 +138,7 @@ static int pmic_thermal_aux(struct intel_pmic_opregion *opregion, int reg, } static int pmic_thermal_pen(struct intel_pmic_opregion *opregion, int reg, - u32 function, u64 *value) + int bit, u32 function, u64 *value) { struct intel_pmic_opregion_data *d = opregion->data; struct regmap *regmap = opregion->regmap; @@ -140,12 +147,12 @@ static int pmic_thermal_pen(struct intel_pmic_opregion *opregion, int reg, return -ENXIO; if (function == ACPI_READ) - return d->get_policy(regmap, reg, value); + return d->get_policy(regmap, reg, bit, value); if (*value != 0 && *value != 1) return -EINVAL; - return d->update_policy(regmap, reg, *value); + return d->update_policy(regmap, reg, bit, *value); } static bool pmic_thermal_is_temp(int address) @@ -170,13 +177,13 @@ static acpi_status intel_pmic_thermal_handler(u32 function, { struct intel_pmic_opregion *opregion = region_context; struct intel_pmic_opregion_data *d = opregion->data; - int reg, result; + int reg, bit, result; if (bits != 32 || !value64) return AE_BAD_PARAMETER; result = pmic_get_reg_bit(address, d->thermal_table, - d->thermal_table_count, ®, NULL); + d->thermal_table_count, ®, &bit); if (result == -ENOENT) return AE_BAD_PARAMETER; @@ -187,7 +194,8 @@ static acpi_status intel_pmic_thermal_handler(u32 function, else if (pmic_thermal_is_aux(address)) result = pmic_thermal_aux(opregion, reg, function, value64); else if (pmic_thermal_is_pen(address)) - result = pmic_thermal_pen(opregion, reg, function, value64); + result = pmic_thermal_pen(opregion, reg, bit, + function, value64); else result = -EINVAL; @@ -203,6 +211,48 @@ static acpi_status intel_pmic_thermal_handler(u32 function, return AE_OK; } +static acpi_status intel_pmic_regs_handler(u32 function, + acpi_physical_address address, u32 bits, u64 *value64, + void *handler_context, void *region_context) +{ + struct intel_pmic_opregion *opregion = region_context; + int result = 0; + + switch (address) { + case 0: + return AE_OK; + case 1: + opregion->ctx.addr |= (*value64 & 0xff) << 8; + return AE_OK; + case 2: + opregion->ctx.addr |= *value64 & 0xff; + return AE_OK; + case 3: + opregion->ctx.val = *value64 & 0xff; + return AE_OK; + case 4: + if (*value64) { + result = regmap_write(opregion->regmap, opregion->ctx.addr, + opregion->ctx.val); + } else { + result = regmap_read(opregion->regmap, opregion->ctx.addr, + &opregion->ctx.val); + if (result == 0) + *value64 = opregion->ctx.val; + } + memset(&opregion->ctx, 0x00, sizeof(opregion->ctx)); + } + + if (result < 0) { + if (result == -EINVAL) + return AE_BAD_PARAMETER; + else + return AE_ERROR; + } + + return AE_OK; +} + int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, struct regmap *regmap, struct intel_pmic_opregion_data *d) @@ -242,16 +292,30 @@ int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, acpi_remove_address_space_handler(handle, PMIC_POWER_OPREGION_ID, intel_pmic_power_handler); ret = -ENODEV; - goto out_error; + goto out_remove_power_handler; + } + + status = acpi_install_address_space_handler(handle, + PMIC_REGS_OPREGION_ID, intel_pmic_regs_handler, NULL, + opregion); + if (ACPI_FAILURE(status)) { + ret = -ENODEV; + goto out_remove_thermal_handler; } opregion->data = d; return 0; +out_remove_thermal_handler: + acpi_remove_address_space_handler(handle, PMIC_THERMAL_OPREGION_ID, + intel_pmic_thermal_handler); + +out_remove_power_handler: + acpi_remove_address_space_handler(handle, PMIC_POWER_OPREGION_ID, + intel_pmic_power_handler); + out_error: acpi_lpat_free_conversion_table(opregion->lpat_table); return ret; } EXPORT_SYMBOL_GPL(intel_pmic_install_opregion_handler); - -MODULE_LICENSE("GPL"); diff --git a/drivers/acpi/pmic/intel_pmic.h b/drivers/acpi/pmic/intel_pmic.h index d4e90af8f0dd..e8bfa7b865a5 100644 --- a/drivers/acpi/pmic/intel_pmic.h +++ b/drivers/acpi/pmic/intel_pmic.h @@ -12,8 +12,8 @@ struct intel_pmic_opregion_data { int (*update_power)(struct regmap *r, int reg, int bit, bool on); int (*get_raw_temp)(struct regmap *r, int reg); int (*update_aux)(struct regmap *r, int reg, int raw_temp); - int (*get_policy)(struct regmap *r, int reg, u64 *value); - int (*update_policy)(struct regmap *r, int reg, int enable); + int (*get_policy)(struct regmap *r, int reg, int bit, u64 *value); + int (*update_policy)(struct regmap *r, int reg, int bit, int enable); struct pmic_table *power_table; int power_table_count; struct pmic_table *thermal_table; diff --git a/drivers/acpi/pmic/intel_pmic_bxtwc.c b/drivers/acpi/pmic/intel_pmic_bxtwc.c new file mode 100644 index 000000000000..90011aad4d20 --- /dev/null +++ b/drivers/acpi/pmic/intel_pmic_bxtwc.c @@ -0,0 +1,420 @@ +/* + * intel_pmic_bxtwc.c - Intel BXT WhiskeyCove PMIC operation region driver + * + * Copyright (C) 2015 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/regmap.h> +#include <linux/platform_device.h> +#include "intel_pmic.h" + +#define WHISKEY_COVE_ALRT_HIGH_BIT_MASK 0x0F +#define WHISKEY_COVE_ADC_HIGH_BIT(x) (((x & 0x0F) << 8)) +#define WHISKEY_COVE_ADC_CURSRC(x) (((x & 0xF0) >> 4)) +#define VR_MODE_DISABLED 0 +#define VR_MODE_AUTO BIT(0) +#define VR_MODE_NORMAL BIT(1) +#define VR_MODE_SWITCH BIT(2) +#define VR_MODE_ECO (BIT(0)|BIT(1)) +#define VSWITCH2_OUTPUT BIT(5) +#define VSWITCH1_OUTPUT BIT(4) +#define VUSBPHY_CHARGE BIT(1) + +static struct pmic_table power_table[] = { + { + .address = 0x0, + .reg = 0x63, + .bit = VR_MODE_AUTO, + }, /* VDD1 -> VDD1CNT */ + { + .address = 0x04, + .reg = 0x65, + .bit = VR_MODE_AUTO, + }, /* VDD2 -> VDD2CNT */ + { + .address = 0x08, + .reg = 0x67, + .bit = VR_MODE_AUTO, + }, /* VDD3 -> VDD3CNT */ + { + .address = 0x0c, + .reg = 0x6d, + .bit = VR_MODE_AUTO, + }, /* VLFX -> VFLEXCNT */ + { + .address = 0x10, + .reg = 0x6f, + .bit = VR_MODE_NORMAL, + }, /* VP1A -> VPROG1ACNT */ + { + .address = 0x14, + .reg = 0x70, + .bit = VR_MODE_NORMAL, + }, /* VP1B -> VPROG1BCNT */ + { + .address = 0x18, + .reg = 0x71, + .bit = VR_MODE_NORMAL, + }, /* VP1C -> VPROG1CCNT */ + { + .address = 0x1c, + .reg = 0x72, + .bit = VR_MODE_NORMAL, + }, /* VP1D -> VPROG1DCNT */ + { + .address = 0x20, + .reg = 0x73, + .bit = VR_MODE_NORMAL, + }, /* VP2A -> VPROG2ACNT */ + { + .address = 0x24, + .reg = 0x74, + .bit = VR_MODE_NORMAL, + }, /* VP2B -> VPROG2BCNT */ + { + .address = 0x28, + .reg = 0x75, + .bit = VR_MODE_NORMAL, + }, /* VP2C -> VPROG2CCNT */ + { + .address = 0x2c, + .reg = 0x76, + .bit = VR_MODE_NORMAL, + }, /* VP3A -> VPROG3ACNT */ + { + .address = 0x30, + .reg = 0x77, + .bit = VR_MODE_NORMAL, + }, /* VP3B -> VPROG3BCNT */ + { + .address = 0x34, + .reg = 0x78, + .bit = VSWITCH2_OUTPUT, + }, /* VSW2 -> VLD0CNT Bit 5*/ + { + .address = 0x38, + .reg = 0x78, + .bit = VSWITCH1_OUTPUT, + }, /* VSW1 -> VLD0CNT Bit 4 */ + { + .address = 0x3c, + .reg = 0x78, + .bit = VUSBPHY_CHARGE, + }, /* VUPY -> VLDOCNT Bit 1 */ + { + .address = 0x40, + .reg = 0x7b, + .bit = VR_MODE_NORMAL, + }, /* VRSO -> VREFSOCCNT*/ + { + .address = 0x44, + .reg = 0xA0, + .bit = VR_MODE_NORMAL, + }, /* VP1E -> VPROG1ECNT */ + { + .address = 0x48, + .reg = 0xA1, + .bit = VR_MODE_NORMAL, + }, /* VP1F -> VPROG1FCNT */ + { + .address = 0x4c, + .reg = 0xA2, + .bit = VR_MODE_NORMAL, + }, /* VP2D -> VPROG2DCNT */ + { + .address = 0x50, + .reg = 0xA3, + .bit = VR_MODE_NORMAL, + }, /* VP4A -> VPROG4ACNT */ + { + .address = 0x54, + .reg = 0xA4, + .bit = VR_MODE_NORMAL, + }, /* VP4B -> VPROG4BCNT */ + { + .address = 0x58, + .reg = 0xA5, + .bit = VR_MODE_NORMAL, + }, /* VP4C -> VPROG4CCNT */ + { + .address = 0x5c, + .reg = 0xA6, + .bit = VR_MODE_NORMAL, + }, /* VP4D -> VPROG4DCNT */ + { + .address = 0x60, + .reg = 0xA7, + .bit = VR_MODE_NORMAL, + }, /* VP5A -> VPROG5ACNT */ + { + .address = 0x64, + .reg = 0xA8, + .bit = VR_MODE_NORMAL, + }, /* VP5B -> VPROG5BCNT */ + { + .address = 0x68, + .reg = 0xA9, + .bit = VR_MODE_NORMAL, + }, /* VP6A -> VPROG6ACNT */ + { + .address = 0x6c, + .reg = 0xAA, + .bit = VR_MODE_NORMAL, + }, /* VP6B -> VPROG6BCNT */ + { + .address = 0x70, + .reg = 0x36, + .bit = BIT(2), + }, /* SDWN_N -> MODEMCTRL Bit 2 */ + { + .address = 0x74, + .reg = 0x36, + .bit = BIT(0), + } /* MOFF -> MODEMCTRL Bit 0 */ +}; + +static struct pmic_table thermal_table[] = { + { + .address = 0x00, + .reg = 0x4F39 + }, + { + .address = 0x04, + .reg = 0x4F24 + }, + { + .address = 0x08, + .reg = 0x4F26 + }, + { + .address = 0x0c, + .reg = 0x4F3B + }, + { + .address = 0x10, + .reg = 0x4F28 + }, + { + .address = 0x14, + .reg = 0x4F2A + }, + { + .address = 0x18, + .reg = 0x4F3D + }, + { + .address = 0x1c, + .reg = 0x4F2C + }, + { + .address = 0x20, + .reg = 0x4F2E + }, + { + .address = 0x24, + .reg = 0x4F3F + }, + { + .address = 0x28, + .reg = 0x4F30 + }, + { + .address = 0x30, + .reg = 0x4F41 + }, + { + .address = 0x34, + .reg = 0x4F32 + }, + { + .address = 0x3c, + .reg = 0x4F43 + }, + { + .address = 0x40, + .reg = 0x4F34 + }, + { + .address = 0x48, + .reg = 0x4F6A, + .bit = 0, + }, + { + .address = 0x4C, + .reg = 0x4F6A, + .bit = 1 + }, + { + .address = 0x50, + .reg = 0x4F6A, + .bit = 2 + }, + { + .address = 0x54, + .reg = 0x4F6A, + .bit = 4 + }, + { + .address = 0x58, + .reg = 0x4F6A, + .bit = 5 + }, + { + .address = 0x5C, + .reg = 0x4F6A, + .bit = 3 + }, +}; + +static int intel_bxtwc_pmic_get_power(struct regmap *regmap, int reg, + int bit, u64 *value) +{ + int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = (data & bit) ? 1 : 0; + return 0; +} + +static int intel_bxtwc_pmic_update_power(struct regmap *regmap, int reg, + int bit, bool on) +{ + u8 val, mask = bit; + + if (on) + val = 0xFF; + else + val = 0x0; + + return regmap_update_bits(regmap, reg, mask, val); +} + +static int intel_bxtwc_pmic_get_raw_temp(struct regmap *regmap, int reg) +{ + unsigned int val, adc_val, reg_val; + u8 temp_l, temp_h, cursrc; + unsigned long rlsb; + static const unsigned long rlsb_array[] = { + 0, 260420, 130210, 65100, 32550, 16280, + 8140, 4070, 2030, 0, 260420, 130210 }; + + if (regmap_read(regmap, reg, &val)) + return -EIO; + temp_l = (u8) val; + + if (regmap_read(regmap, (reg - 1), &val)) + return -EIO; + temp_h = (u8) val; + + reg_val = temp_l | WHISKEY_COVE_ADC_HIGH_BIT(temp_h); + cursrc = WHISKEY_COVE_ADC_CURSRC(temp_h); + rlsb = rlsb_array[cursrc]; + adc_val = reg_val * rlsb / 1000; + + return adc_val; +} + +static int +intel_bxtwc_pmic_update_aux(struct regmap *regmap, int reg, int raw) +{ + u32 bsr_num; + u16 resi_val, count = 0, thrsh = 0; + u8 alrt_h, alrt_l, cursel = 0; + + bsr_num = raw; + bsr_num /= (1 << 5); + + count = fls(bsr_num) - 1; + + cursel = clamp_t(s8, (count - 7), 0, 7); + thrsh = raw / (1 << (4 + cursel)); + + resi_val = (cursel << 9) | thrsh; + alrt_h = (resi_val >> 8) & WHISKEY_COVE_ALRT_HIGH_BIT_MASK; + if (regmap_update_bits(regmap, + reg - 1, + WHISKEY_COVE_ALRT_HIGH_BIT_MASK, + alrt_h)) + return -EIO; + + alrt_l = (u8)resi_val; + return regmap_write(regmap, reg, alrt_l); +} + +static int +intel_bxtwc_pmic_get_policy(struct regmap *regmap, int reg, int bit, u64 *value) +{ + u8 mask = BIT(bit); + unsigned int val; + + if (regmap_read(regmap, reg, &val)) + return -EIO; + + *value = (val & mask) >> bit; + return 0; +} + +static int +intel_bxtwc_pmic_update_policy(struct regmap *regmap, + int reg, int bit, int enable) +{ + u8 mask = BIT(bit), val = enable << bit; + + return regmap_update_bits(regmap, reg, mask, val); +} + +static struct intel_pmic_opregion_data intel_bxtwc_pmic_opregion_data = { + .get_power = intel_bxtwc_pmic_get_power, + .update_power = intel_bxtwc_pmic_update_power, + .get_raw_temp = intel_bxtwc_pmic_get_raw_temp, + .update_aux = intel_bxtwc_pmic_update_aux, + .get_policy = intel_bxtwc_pmic_get_policy, + .update_policy = intel_bxtwc_pmic_update_policy, + .power_table = power_table, + .power_table_count = ARRAY_SIZE(power_table), + .thermal_table = thermal_table, + .thermal_table_count = ARRAY_SIZE(thermal_table), +}; + +static int intel_bxtwc_pmic_opregion_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + + return intel_pmic_install_opregion_handler(&pdev->dev, + ACPI_HANDLE(pdev->dev.parent), + pmic->regmap, + &intel_bxtwc_pmic_opregion_data); +} + +static struct platform_device_id bxt_wc_opregion_id_table[] = { + { .name = "bxt_wcove_region" }, + {}, +}; + +static struct platform_driver intel_bxtwc_pmic_opregion_driver = { + .probe = intel_bxtwc_pmic_opregion_probe, + .driver = { + .name = "bxt_whiskey_cove_pmic", + }, + .id_table = bxt_wc_opregion_id_table, +}; + +static int __init intel_bxtwc_pmic_opregion_driver_init(void) +{ + return platform_driver_register(&intel_bxtwc_pmic_opregion_driver); +} +device_initcall(intel_bxtwc_pmic_opregion_driver_init); diff --git a/drivers/acpi/pmic/intel_pmic_crc.c b/drivers/acpi/pmic/intel_pmic_crc.c index fcd1852dcdee..d7f1761ab1bc 100644 --- a/drivers/acpi/pmic/intel_pmic_crc.c +++ b/drivers/acpi/pmic/intel_pmic_crc.c @@ -141,7 +141,8 @@ static int intel_crc_pmic_update_aux(struct regmap *regmap, int reg, int raw) regmap_update_bits(regmap, reg - 1, 0x3, raw >> 8) ? -EIO : 0; } -static int intel_crc_pmic_get_policy(struct regmap *regmap, int reg, u64 *value) +static int intel_crc_pmic_get_policy(struct regmap *regmap, + int reg, int bit, u64 *value) { int pen; @@ -152,7 +153,7 @@ static int intel_crc_pmic_get_policy(struct regmap *regmap, int reg, u64 *value) } static int intel_crc_pmic_update_policy(struct regmap *regmap, - int reg, int enable) + int reg, int bit, int enable) { int alert0; diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c index 6a082d4de12c..e6e991ac20f3 100644 --- a/drivers/acpi/pmic/intel_pmic_xpower.c +++ b/drivers/acpi/pmic/intel_pmic_xpower.c @@ -13,7 +13,7 @@ * GNU General Public License for more details. */ -#include <linux/module.h> +#include <linux/init.h> #include <linux/acpi.h> #include <linux/mfd/axp20x.h> #include <linux/regmap.h> @@ -262,7 +262,4 @@ static int __init intel_xpower_pmic_opregion_driver_init(void) { return platform_driver_register(&intel_xpower_pmic_opregion_driver); } -module_init(intel_xpower_pmic_opregion_driver_init); - -MODULE_DESCRIPTION("XPower AXP288 ACPI operation region driver"); -MODULE_LICENSE("GPL"); +device_initcall(intel_xpower_pmic_opregion_driver_init); diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 33a38d604630..9125d7d96372 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -108,13 +108,12 @@ static int map_gicc_mpidr(struct acpi_subtable_header *entry, return -EINVAL; } -static phys_cpuid_t map_madt_entry(int type, u32 acpi_id) +static phys_cpuid_t map_madt_entry(struct acpi_table_madt *madt, + int type, u32 acpi_id) { unsigned long madt_end, entry; phys_cpuid_t phys_id = PHYS_CPUID_INVALID; /* CPU hardware ID */ - struct acpi_table_madt *madt; - madt = get_madt_table(); if (!madt) return phys_id; @@ -145,6 +144,25 @@ static phys_cpuid_t map_madt_entry(int type, u32 acpi_id) return phys_id; } +phys_cpuid_t __init acpi_map_madt_entry(u32 acpi_id) +{ + struct acpi_table_madt *madt = NULL; + acpi_size tbl_size; + phys_cpuid_t rv; + + acpi_get_table_with_size(ACPI_SIG_MADT, 0, + (struct acpi_table_header **)&madt, + &tbl_size); + if (!madt) + return PHYS_CPUID_INVALID; + + rv = map_madt_entry(madt, 1, acpi_id); + + early_acpi_os_unmap_memory(madt, tbl_size); + + return rv; +} + static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; @@ -185,7 +203,7 @@ phys_cpuid_t acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id) phys_id = map_mat_entry(handle, type, acpi_id); if (invalid_phys_cpuid(phys_id)) - phys_id = map_madt_entry(type, acpi_id); + phys_id = map_madt_entry(get_madt_table(), type, acpi_id); return phys_id; } diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index d2fa8cb82d2b..0ca14ac7bb28 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -90,7 +90,7 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) pr->performance_platform_limit); break; case ACPI_PROCESSOR_NOTIFY_POWER: - acpi_processor_cst_has_changed(pr); + acpi_processor_power_state_has_changed(pr); acpi_bus_generate_netlink_event(device->pnp.device_class, dev_name(&device->dev), event, 0); break; diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 444e3745c8b3..cea52528aa18 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -59,6 +59,12 @@ module_param(latency_factor, uint, 0644); static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device); +struct cpuidle_driver acpi_idle_driver = { + .name = "acpi_idle", + .owner = THIS_MODULE, +}; + +#ifdef CONFIG_ACPI_PROCESSOR_CSTATE static DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX], acpi_cstate); @@ -297,7 +303,6 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *cst; - if (nocst) return -ENODEV; @@ -570,7 +575,7 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) return (working); } -static int acpi_processor_get_power_info(struct acpi_processor *pr) +static int acpi_processor_get_cstate_info(struct acpi_processor *pr) { unsigned int i; int result; @@ -804,36 +809,12 @@ static void acpi_idle_enter_freeze(struct cpuidle_device *dev, acpi_idle_do_entry(cx); } -struct cpuidle_driver acpi_idle_driver = { - .name = "acpi_idle", - .owner = THIS_MODULE, -}; - -/** - * acpi_processor_setup_cpuidle_cx - prepares and configures CPUIDLE - * device i.e. per-cpu data - * - * @pr: the ACPI processor - * @dev : the cpuidle device - */ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr, struct cpuidle_device *dev) { int i, count = CPUIDLE_DRIVER_STATE_START; struct acpi_processor_cx *cx; - if (!pr->flags.power_setup_done) - return -EINVAL; - - if (pr->flags.power == 0) { - return -EINVAL; - } - - if (!dev) - return -EINVAL; - - dev->cpu = pr->id; - if (max_cstate == 0) max_cstate = 1; @@ -856,31 +837,13 @@ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr, return 0; } -/** - * acpi_processor_setup_cpuidle states- prepares and configures cpuidle - * global state data i.e. idle routines - * - * @pr: the ACPI processor - */ -static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) +static int acpi_processor_setup_cstates(struct acpi_processor *pr) { int i, count = CPUIDLE_DRIVER_STATE_START; struct acpi_processor_cx *cx; struct cpuidle_state *state; struct cpuidle_driver *drv = &acpi_idle_driver; - if (!pr->flags.power_setup_done) - return -EINVAL; - - if (pr->flags.power == 0) - return -EINVAL; - - drv->safe_state_index = -1; - for (i = CPUIDLE_DRIVER_STATE_START; i < CPUIDLE_STATE_MAX; i++) { - drv->states[i].name[0] = '\0'; - drv->states[i].desc[0] = '\0'; - } - if (max_cstate == 0) max_cstate = 1; @@ -892,7 +855,7 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) state = &drv->states[count]; snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i); - strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN); + strlcpy(state->desc, cx->desc, CPUIDLE_DESC_LEN); state->exit_latency = cx->latency; state->target_residency = cx->latency * latency_factor; state->enter = acpi_idle_enter; @@ -925,6 +888,450 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) return 0; } +static inline void acpi_processor_cstate_first_run_checks(void) +{ + acpi_status status; + static int first_run; + + if (first_run) + return; + dmi_check_system(processor_power_dmi_table); + max_cstate = acpi_processor_cstate_check(max_cstate); + if (max_cstate < ACPI_C_STATES_MAX) + pr_notice("ACPI: processor limited to max C-state %d\n", + max_cstate); + first_run++; + + if (acpi_gbl_FADT.cst_control && !nocst) { + status = acpi_os_write_port(acpi_gbl_FADT.smi_command, + acpi_gbl_FADT.cst_control, 8); + if (ACPI_FAILURE(status)) + ACPI_EXCEPTION((AE_INFO, status, + "Notifying BIOS of _CST ability failed")); + } +} +#else + +static inline int disabled_by_idle_boot_param(void) { return 0; } +static inline void acpi_processor_cstate_first_run_checks(void) { } +static int acpi_processor_get_cstate_info(struct acpi_processor *pr) +{ + return -ENODEV; +} + +static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr, + struct cpuidle_device *dev) +{ + return -EINVAL; +} + +static int acpi_processor_setup_cstates(struct acpi_processor *pr) +{ + return -EINVAL; +} + +#endif /* CONFIG_ACPI_PROCESSOR_CSTATE */ + +struct acpi_lpi_states_array { + unsigned int size; + unsigned int composite_states_size; + struct acpi_lpi_state *entries; + struct acpi_lpi_state *composite_states[ACPI_PROCESSOR_MAX_POWER]; +}; + +static int obj_get_integer(union acpi_object *obj, u32 *value) +{ + if (obj->type != ACPI_TYPE_INTEGER) + return -EINVAL; + + *value = obj->integer.value; + return 0; +} + +static int acpi_processor_evaluate_lpi(acpi_handle handle, + struct acpi_lpi_states_array *info) +{ + acpi_status status; + int ret = 0; + int pkg_count, state_idx = 1, loop; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *lpi_data; + struct acpi_lpi_state *lpi_state; + + status = acpi_evaluate_object(handle, "_LPI", NULL, &buffer); + if (ACPI_FAILURE(status)) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No _LPI, giving up\n")); + return -ENODEV; + } + + lpi_data = buffer.pointer; + + /* There must be at least 4 elements = 3 elements + 1 package */ + if (!lpi_data || lpi_data->type != ACPI_TYPE_PACKAGE || + lpi_data->package.count < 4) { + pr_debug("not enough elements in _LPI\n"); + ret = -ENODATA; + goto end; + } + + pkg_count = lpi_data->package.elements[2].integer.value; + + /* Validate number of power states. */ + if (pkg_count < 1 || pkg_count != lpi_data->package.count - 3) { + pr_debug("count given by _LPI is not valid\n"); + ret = -ENODATA; + goto end; + } + + lpi_state = kcalloc(pkg_count, sizeof(*lpi_state), GFP_KERNEL); + if (!lpi_state) { + ret = -ENOMEM; + goto end; + } + + info->size = pkg_count; + info->entries = lpi_state; + + /* LPI States start at index 3 */ + for (loop = 3; state_idx <= pkg_count; loop++, state_idx++, lpi_state++) { + union acpi_object *element, *pkg_elem, *obj; + + element = &lpi_data->package.elements[loop]; + if (element->type != ACPI_TYPE_PACKAGE || element->package.count < 7) + continue; + + pkg_elem = element->package.elements; + + obj = pkg_elem + 6; + if (obj->type == ACPI_TYPE_BUFFER) { + struct acpi_power_register *reg; + + reg = (struct acpi_power_register *)obj->buffer.pointer; + if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO && + reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) + continue; + + lpi_state->address = reg->address; + lpi_state->entry_method = + reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE ? + ACPI_CSTATE_FFH : ACPI_CSTATE_SYSTEMIO; + } else if (obj->type == ACPI_TYPE_INTEGER) { + lpi_state->entry_method = ACPI_CSTATE_INTEGER; + lpi_state->address = obj->integer.value; + } else { + continue; + } + + /* elements[7,8] skipped for now i.e. Residency/Usage counter*/ + + obj = pkg_elem + 9; + if (obj->type == ACPI_TYPE_STRING) + strlcpy(lpi_state->desc, obj->string.pointer, + ACPI_CX_DESC_LEN); + + lpi_state->index = state_idx; + if (obj_get_integer(pkg_elem + 0, &lpi_state->min_residency)) { + pr_debug("No min. residency found, assuming 10 us\n"); + lpi_state->min_residency = 10; + } + + if (obj_get_integer(pkg_elem + 1, &lpi_state->wake_latency)) { + pr_debug("No wakeup residency found, assuming 10 us\n"); + lpi_state->wake_latency = 10; + } + + if (obj_get_integer(pkg_elem + 2, &lpi_state->flags)) + lpi_state->flags = 0; + + if (obj_get_integer(pkg_elem + 3, &lpi_state->arch_flags)) + lpi_state->arch_flags = 0; + + if (obj_get_integer(pkg_elem + 4, &lpi_state->res_cnt_freq)) + lpi_state->res_cnt_freq = 1; + + if (obj_get_integer(pkg_elem + 5, &lpi_state->enable_parent_state)) + lpi_state->enable_parent_state = 0; + } + + acpi_handle_debug(handle, "Found %d power states\n", state_idx); +end: + kfree(buffer.pointer); + return ret; +} + +/* + * flat_state_cnt - the number of composite LPI states after the process of flattening + */ +static int flat_state_cnt; + +/** + * combine_lpi_states - combine local and parent LPI states to form a composite LPI state + * + * @local: local LPI state + * @parent: parent LPI state + * @result: composite LPI state + */ +static bool combine_lpi_states(struct acpi_lpi_state *local, + struct acpi_lpi_state *parent, + struct acpi_lpi_state *result) +{ + if (parent->entry_method == ACPI_CSTATE_INTEGER) { + if (!parent->address) /* 0 means autopromotable */ + return false; + result->address = local->address + parent->address; + } else { + result->address = parent->address; + } + + result->min_residency = max(local->min_residency, parent->min_residency); + result->wake_latency = local->wake_latency + parent->wake_latency; + result->enable_parent_state = parent->enable_parent_state; + result->entry_method = local->entry_method; + + result->flags = parent->flags; + result->arch_flags = parent->arch_flags; + result->index = parent->index; + + strlcpy(result->desc, local->desc, ACPI_CX_DESC_LEN); + strlcat(result->desc, "+", ACPI_CX_DESC_LEN); + strlcat(result->desc, parent->desc, ACPI_CX_DESC_LEN); + return true; +} + +#define ACPI_LPI_STATE_FLAGS_ENABLED BIT(0) + +static void stash_composite_state(struct acpi_lpi_states_array *curr_level, + struct acpi_lpi_state *t) +{ + curr_level->composite_states[curr_level->composite_states_size++] = t; +} + +static int flatten_lpi_states(struct acpi_processor *pr, + struct acpi_lpi_states_array *curr_level, + struct acpi_lpi_states_array *prev_level) +{ + int i, j, state_count = curr_level->size; + struct acpi_lpi_state *p, *t = curr_level->entries; + + curr_level->composite_states_size = 0; + for (j = 0; j < state_count; j++, t++) { + struct acpi_lpi_state *flpi; + + if (!(t->flags & ACPI_LPI_STATE_FLAGS_ENABLED)) + continue; + + if (flat_state_cnt >= ACPI_PROCESSOR_MAX_POWER) { + pr_warn("Limiting number of LPI states to max (%d)\n", + ACPI_PROCESSOR_MAX_POWER); + pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n"); + break; + } + + flpi = &pr->power.lpi_states[flat_state_cnt]; + + if (!prev_level) { /* leaf/processor node */ + memcpy(flpi, t, sizeof(*t)); + stash_composite_state(curr_level, flpi); + flat_state_cnt++; + continue; + } + + for (i = 0; i < prev_level->composite_states_size; i++) { + p = prev_level->composite_states[i]; + if (t->index <= p->enable_parent_state && + combine_lpi_states(p, t, flpi)) { + stash_composite_state(curr_level, flpi); + flat_state_cnt++; + flpi++; + } + } + } + + kfree(curr_level->entries); + return 0; +} + +static int acpi_processor_get_lpi_info(struct acpi_processor *pr) +{ + int ret, i; + acpi_status status; + acpi_handle handle = pr->handle, pr_ahandle; + struct acpi_device *d = NULL; + struct acpi_lpi_states_array info[2], *tmp, *prev, *curr; + + if (!osc_pc_lpi_support_confirmed) + return -EOPNOTSUPP; + + if (!acpi_has_method(handle, "_LPI")) + return -EINVAL; + + flat_state_cnt = 0; + prev = &info[0]; + curr = &info[1]; + handle = pr->handle; + ret = acpi_processor_evaluate_lpi(handle, prev); + if (ret) + return ret; + flatten_lpi_states(pr, prev, NULL); + + status = acpi_get_parent(handle, &pr_ahandle); + while (ACPI_SUCCESS(status)) { + acpi_bus_get_device(pr_ahandle, &d); + handle = pr_ahandle; + + if (strcmp(acpi_device_hid(d), ACPI_PROCESSOR_CONTAINER_HID)) + break; + + /* can be optional ? */ + if (!acpi_has_method(handle, "_LPI")) + break; + + ret = acpi_processor_evaluate_lpi(handle, curr); + if (ret) + break; + + /* flatten all the LPI states in this level of hierarchy */ + flatten_lpi_states(pr, curr, prev); + + tmp = prev, prev = curr, curr = tmp; + + status = acpi_get_parent(handle, &pr_ahandle); + } + + pr->power.count = flat_state_cnt; + /* reset the index after flattening */ + for (i = 0; i < pr->power.count; i++) + pr->power.lpi_states[i].index = i; + + /* Tell driver that _LPI is supported. */ + pr->flags.has_lpi = 1; + pr->flags.power = 1; + + return 0; +} + +int __weak acpi_processor_ffh_lpi_probe(unsigned int cpu) +{ + return -ENODEV; +} + +int __weak acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi) +{ + return -ENODEV; +} + +/** + * acpi_idle_lpi_enter - enters an ACPI any LPI state + * @dev: the target CPU + * @drv: cpuidle driver containing cpuidle state info + * @index: index of target state + * + * Return: 0 for success or negative value for error + */ +static int acpi_idle_lpi_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + struct acpi_processor *pr; + struct acpi_lpi_state *lpi; + + pr = __this_cpu_read(processors); + + if (unlikely(!pr)) + return -EINVAL; + + lpi = &pr->power.lpi_states[index]; + if (lpi->entry_method == ACPI_CSTATE_FFH) + return acpi_processor_ffh_lpi_enter(lpi); + + return -EINVAL; +} + +static int acpi_processor_setup_lpi_states(struct acpi_processor *pr) +{ + int i; + struct acpi_lpi_state *lpi; + struct cpuidle_state *state; + struct cpuidle_driver *drv = &acpi_idle_driver; + + if (!pr->flags.has_lpi) + return -EOPNOTSUPP; + + for (i = 0; i < pr->power.count && i < CPUIDLE_STATE_MAX; i++) { + lpi = &pr->power.lpi_states[i]; + + state = &drv->states[i]; + snprintf(state->name, CPUIDLE_NAME_LEN, "LPI-%d", i); + strlcpy(state->desc, lpi->desc, CPUIDLE_DESC_LEN); + state->exit_latency = lpi->wake_latency; + state->target_residency = lpi->min_residency; + if (lpi->arch_flags) + state->flags |= CPUIDLE_FLAG_TIMER_STOP; + state->enter = acpi_idle_lpi_enter; + drv->safe_state_index = i; + } + + drv->state_count = i; + + return 0; +} + +/** + * acpi_processor_setup_cpuidle_states- prepares and configures cpuidle + * global state data i.e. idle routines + * + * @pr: the ACPI processor + */ +static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) +{ + int i; + struct cpuidle_driver *drv = &acpi_idle_driver; + + if (!pr->flags.power_setup_done || !pr->flags.power) + return -EINVAL; + + drv->safe_state_index = -1; + for (i = CPUIDLE_DRIVER_STATE_START; i < CPUIDLE_STATE_MAX; i++) { + drv->states[i].name[0] = '\0'; + drv->states[i].desc[0] = '\0'; + } + + if (pr->flags.has_lpi) + return acpi_processor_setup_lpi_states(pr); + + return acpi_processor_setup_cstates(pr); +} + +/** + * acpi_processor_setup_cpuidle_dev - prepares and configures CPUIDLE + * device i.e. per-cpu data + * + * @pr: the ACPI processor + * @dev : the cpuidle device + */ +static int acpi_processor_setup_cpuidle_dev(struct acpi_processor *pr, + struct cpuidle_device *dev) +{ + if (!pr->flags.power_setup_done || !pr->flags.power || !dev) + return -EINVAL; + + dev->cpu = pr->id; + if (pr->flags.has_lpi) + return acpi_processor_ffh_lpi_probe(pr->id); + + return acpi_processor_setup_cpuidle_cx(pr, dev); +} + +static int acpi_processor_get_power_info(struct acpi_processor *pr) +{ + int ret; + + ret = acpi_processor_get_lpi_info(pr); + if (ret) + ret = acpi_processor_get_cstate_info(pr); + + return ret; +} + int acpi_processor_hotplug(struct acpi_processor *pr) { int ret = 0; @@ -933,18 +1340,15 @@ int acpi_processor_hotplug(struct acpi_processor *pr) if (disabled_by_idle_boot_param()) return 0; - if (nocst) - return -ENODEV; - if (!pr->flags.power_setup_done) return -ENODEV; dev = per_cpu(acpi_cpuidle_device, pr->id); cpuidle_pause_and_lock(); cpuidle_disable_device(dev); - acpi_processor_get_power_info(pr); - if (pr->flags.power) { - acpi_processor_setup_cpuidle_cx(pr, dev); + ret = acpi_processor_get_power_info(pr); + if (!ret && pr->flags.power) { + acpi_processor_setup_cpuidle_dev(pr, dev); ret = cpuidle_enable_device(dev); } cpuidle_resume_and_unlock(); @@ -952,7 +1356,7 @@ int acpi_processor_hotplug(struct acpi_processor *pr) return ret; } -int acpi_processor_cst_has_changed(struct acpi_processor *pr) +int acpi_processor_power_state_has_changed(struct acpi_processor *pr) { int cpu; struct acpi_processor *_pr; @@ -961,9 +1365,6 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) if (disabled_by_idle_boot_param()) return 0; - if (nocst) - return -ENODEV; - if (!pr->flags.power_setup_done) return -ENODEV; @@ -1000,7 +1401,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) acpi_processor_get_power_info(_pr); if (_pr->flags.power) { dev = per_cpu(acpi_cpuidle_device, cpu); - acpi_processor_setup_cpuidle_cx(_pr, dev); + acpi_processor_setup_cpuidle_dev(_pr, dev); cpuidle_enable_device(dev); } } @@ -1015,35 +1416,16 @@ static int acpi_processor_registered; int acpi_processor_power_init(struct acpi_processor *pr) { - acpi_status status; int retval; struct cpuidle_device *dev; - static int first_run; if (disabled_by_idle_boot_param()) return 0; - if (!first_run) { - dmi_check_system(processor_power_dmi_table); - max_cstate = acpi_processor_cstate_check(max_cstate); - if (max_cstate < ACPI_C_STATES_MAX) - printk(KERN_NOTICE - "ACPI: processor limited to max C-state %d\n", - max_cstate); - first_run++; - } - - if (acpi_gbl_FADT.cst_control && !nocst) { - status = - acpi_os_write_port(acpi_gbl_FADT.smi_command, acpi_gbl_FADT.cst_control, 8); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Notifying BIOS of _CST ability failed")); - } - } + acpi_processor_cstate_first_run_checks(); - acpi_processor_get_power_info(pr); - pr->flags.power_setup_done = 1; + if (!acpi_processor_get_power_info(pr)) + pr->flags.power_setup_done = 1; /* * Install the idle handler if processor power management is supported. @@ -1066,7 +1448,7 @@ int acpi_processor_power_init(struct acpi_processor *pr) return -ENOMEM; per_cpu(acpi_cpuidle_device, pr->id) = dev; - acpi_processor_setup_cpuidle_cx(pr, dev); + acpi_processor_setup_cpuidle_dev(pr, dev); /* Register per-cpu cpuidle_device. Cpuidle driver * must already be registered before registering device diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 5f28cf778349..405056b95b05 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -494,6 +494,8 @@ static void acpi_device_del(struct acpi_device *device) device_del(&device->dev); } +static BLOCKING_NOTIFIER_HEAD(acpi_reconfig_chain); + static LIST_HEAD(acpi_device_del_list); static DEFINE_MUTEX(acpi_device_del_lock); @@ -514,6 +516,9 @@ static void acpi_device_del_work_fn(struct work_struct *work_not_used) mutex_unlock(&acpi_device_del_lock); + blocking_notifier_call_chain(&acpi_reconfig_chain, + ACPI_RECONFIG_DEVICE_REMOVE, adev); + acpi_device_del(adev); /* * Drop references to all power resources that might have been @@ -1406,7 +1411,7 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle, acpi_bus_get_flags(device); device->flags.match_driver = false; device->flags.initialized = true; - device->flags.visited = false; + acpi_device_clear_enumerated(device); device_initialize(&device->dev); dev_set_uevent_suppress(&device->dev, true); acpi_init_coherency(device); @@ -1676,15 +1681,20 @@ static void acpi_default_enumeration(struct acpi_device *device) bool is_spi_i2c_slave = false; /* - * Do not enemerate SPI/I2C slaves as they will be enuerated by their + * Do not enumerate SPI/I2C slaves as they will be enumerated by their * respective parents. */ INIT_LIST_HEAD(&resource_list); acpi_dev_get_resources(device, &resource_list, acpi_check_spi_i2c_slave, &is_spi_i2c_slave); acpi_dev_free_resource_list(&resource_list); - if (!is_spi_i2c_slave) + if (!is_spi_i2c_slave) { acpi_create_platform_device(device); + acpi_device_set_enumerated(device); + } else { + blocking_notifier_call_chain(&acpi_reconfig_chain, + ACPI_RECONFIG_DEVICE_ADD, device); + } } static const struct acpi_device_id generic_device_ids[] = { @@ -1751,7 +1761,7 @@ static void acpi_bus_attach(struct acpi_device *device) acpi_bus_get_status(device); /* Skip devices that are not present. */ if (!acpi_device_is_present(device)) { - device->flags.visited = false; + acpi_device_clear_enumerated(device); device->flags.power_manageable = 0; return; } @@ -1766,7 +1776,7 @@ static void acpi_bus_attach(struct acpi_device *device) device->flags.initialized = true; } - device->flags.visited = false; + ret = acpi_scan_attach_handler(device); if (ret < 0) return; @@ -1780,7 +1790,6 @@ static void acpi_bus_attach(struct acpi_device *device) if (!ret && device->pnp.type.platform_id) acpi_default_enumeration(device); } - device->flags.visited = true; ok: list_for_each_entry(child, &device->children, node) @@ -1872,7 +1881,7 @@ void acpi_bus_trim(struct acpi_device *adev) */ acpi_device_set_power(adev, ACPI_STATE_D3_COLD); adev->flags.initialized = false; - adev->flags.visited = false; + acpi_device_clear_enumerated(adev); } EXPORT_SYMBOL_GPL(acpi_bus_trim); @@ -1916,6 +1925,8 @@ static int acpi_bus_scan_fixed(void) return result < 0 ? result : 0; } +static bool acpi_scan_initialized; + int __init acpi_scan_init(void) { int result; @@ -1960,6 +1971,8 @@ int __init acpi_scan_init(void) acpi_update_all_gpes(); + acpi_scan_initialized = true; + out: mutex_unlock(&acpi_scan_lock); return result; @@ -2003,3 +2016,57 @@ int __init __acpi_probe_device_table(struct acpi_probe_entry *ap_head, int nr) return count; } + +struct acpi_table_events_work { + struct work_struct work; + void *table; + u32 event; +}; + +static void acpi_table_events_fn(struct work_struct *work) +{ + struct acpi_table_events_work *tew; + + tew = container_of(work, struct acpi_table_events_work, work); + + if (tew->event == ACPI_TABLE_EVENT_LOAD) { + acpi_scan_lock_acquire(); + acpi_bus_scan(ACPI_ROOT_OBJECT); + acpi_scan_lock_release(); + } + + kfree(tew); +} + +void acpi_scan_table_handler(u32 event, void *table, void *context) +{ + struct acpi_table_events_work *tew; + + if (!acpi_scan_initialized) + return; + + if (event != ACPI_TABLE_EVENT_LOAD) + return; + + tew = kmalloc(sizeof(*tew), GFP_KERNEL); + if (!tew) + return; + + INIT_WORK(&tew->work, acpi_table_events_fn); + tew->table = table; + tew->event = event; + + schedule_work(&tew->work); +} + +int acpi_reconfig_notifier_register(struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&acpi_reconfig_chain, nb); +} +EXPORT_SYMBOL(acpi_reconfig_notifier_register); + +int acpi_reconfig_notifier_unregister(struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(&acpi_reconfig_chain, nb); +} +EXPORT_SYMBOL(acpi_reconfig_notifier_unregister); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 7a2e4d45b266..2b38c1bb0446 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -47,15 +47,32 @@ static void acpi_sleep_tts_switch(u32 acpi_state) } } -static int tts_notify_reboot(struct notifier_block *this, +static void acpi_sleep_pts_switch(u32 acpi_state) +{ + acpi_status status; + + status = acpi_execute_simple_method(NULL, "\\_PTS", acpi_state); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + /* + * OS can't evaluate the _PTS object correctly. Some warning + * message will be printed. But it won't break anything. + */ + printk(KERN_NOTICE "Failure in evaluating _PTS object\n"); + } +} + +static int sleep_notify_reboot(struct notifier_block *this, unsigned long code, void *x) { acpi_sleep_tts_switch(ACPI_STATE_S5); + + acpi_sleep_pts_switch(ACPI_STATE_S5); + return NOTIFY_DONE; } -static struct notifier_block tts_notifier = { - .notifier_call = tts_notify_reboot, +static struct notifier_block sleep_notifier = { + .notifier_call = sleep_notify_reboot, .next = NULL, .priority = 0, }; @@ -899,9 +916,9 @@ int __init acpi_sleep_init(void) pr_info(PREFIX "(supports%s)\n", supported); /* - * Register the tts_notifier to reboot notifier list so that the _TTS - * object can also be evaluated when the system enters S5. + * Register the sleep_notifier to reboot notifier list so that the _TTS + * and _PTS object can also be evaluated when the system enters S5. */ - register_reboot_notifier(&tts_notifier); + register_reboot_notifier(&sleep_notifier); return 0; } diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 4b3a9e27f1b6..358165e9f5b8 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -378,8 +378,7 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr, return; } -static acpi_status -acpi_sysfs_table_handler(u32 event, void *table, void *context) +acpi_status acpi_sysfs_table_handler(u32 event, void *table, void *context) { struct acpi_table_attr *table_attr; @@ -452,9 +451,8 @@ static int acpi_tables_sysfs_init(void) kobject_uevent(tables_kobj, KOBJ_ADD); kobject_uevent(dynamic_tables_kobj, KOBJ_ADD); - status = acpi_install_table_handler(acpi_sysfs_table_handler, NULL); - return ACPI_FAILURE(status) ? -EINVAL : 0; + return 0; err_dynamic_tables: kobject_put(tables_kobj); err: diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index a372f9eaa15d..9f0ad6ebb368 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -34,6 +34,8 @@ #include <linux/bootmem.h> #include <linux/earlycpio.h> #include <linux/memblock.h> +#include <linux/initrd.h> +#include <linux/acpi.h> #include "internal.h" #ifdef CONFIG_ACPI_CUSTOM_DSDT @@ -481,8 +483,10 @@ static DECLARE_BITMAP(acpi_initrd_installed, NR_ACPI_INITRD_TABLES); #define MAP_CHUNK_SIZE (NR_FIX_BTMAPS << PAGE_SHIFT) -static void __init acpi_table_initrd_init(void *data, size_t size) +void __init acpi_table_upgrade(void) { + void *data = (void *)initrd_start; + size_t size = initrd_end - initrd_start; int sig, no, table_nr = 0, total_offset = 0; long offset = 0; struct acpi_table_header *table; @@ -540,7 +544,7 @@ static void __init acpi_table_initrd_init(void *data, size_t size) return; acpi_tables_addr = - memblock_find_in_range(0, max_low_pfn_mapped << PAGE_SHIFT, + memblock_find_in_range(0, ACPI_TABLE_UPGRADE_MAX_PHYS, all_tables_size, PAGE_SIZE); if (!acpi_tables_addr) { WARN_ON(1); @@ -578,10 +582,10 @@ static void __init acpi_table_initrd_init(void *data, size_t size) clen = size; if (clen > MAP_CHUNK_SIZE - slop) clen = MAP_CHUNK_SIZE - slop; - dest_p = early_ioremap(dest_addr & PAGE_MASK, - clen + slop); + dest_p = early_memremap(dest_addr & PAGE_MASK, + clen + slop); memcpy(dest_p + slop, src_p, clen); - early_iounmap(dest_p, clen + slop); + early_memunmap(dest_p, clen + slop); src_p += clen; dest_addr += clen; size -= clen; @@ -696,10 +700,6 @@ next_table: } } #else -static void __init acpi_table_initrd_init(void *data, size_t size) -{ -} - static acpi_status acpi_table_initrd_override(struct acpi_table_header *existing_table, acpi_physical_address *address, @@ -742,11 +742,6 @@ acpi_os_table_override(struct acpi_table_header *existing_table, return AE_OK; } -void __init early_acpi_table_init(void *data, size_t size) -{ - acpi_table_initrd_init(data, size); -} - /* * acpi_table_init() * diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 82707f9824ca..f4ebe39539af 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -1259,7 +1259,8 @@ static int __init acpi_thermal_init(void) return -ENODEV; } - acpi_thermal_pm_queue = create_workqueue("acpi_thermal_pm"); + acpi_thermal_pm_queue = alloc_workqueue("acpi_thermal_pm", + WQ_HIGHPRI | WQ_MEM_RECLAIM, 0); if (!acpi_thermal_pm_queue) return -ENODEV; diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 3d1327615f72..a6b36fc53aec 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -167,6 +167,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"), }, }, + { + .callback = video_detect_force_video, + .ident = "ThinkPad X201T", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"), + }, + }, /* The native backlight controls do not work on some older machines */ { diff --git a/drivers/cpuidle/cpuidle-arm.c b/drivers/cpuidle/cpuidle-arm.c index e342565e8715..4ba3d3fe142f 100644 --- a/drivers/cpuidle/cpuidle-arm.c +++ b/drivers/cpuidle/cpuidle-arm.c @@ -36,26 +36,12 @@ static int arm_enter_idle_state(struct cpuidle_device *dev, struct cpuidle_driver *drv, int idx) { - int ret; - - if (!idx) { - cpu_do_idle(); - return idx; - } - - ret = cpu_pm_enter(); - if (!ret) { - /* - * Pass idle state index to cpu_suspend which in turn will - * call the CPU ops suspend protocol with idle index as a - * parameter. - */ - ret = arm_cpuidle_suspend(idx); - - cpu_pm_exit(); - } - - return ret ? -1 : idx; + /* + * Pass idle state index to arm_cpuidle_suspend which in turn + * will call the CPU ops suspend protocol with idle index as a + * parameter. + */ + return CPU_PM_CPU_IDLE_ENTER(arm_cpuidle_suspend, idx); } static struct cpuidle_driver arm_idle_driver = { diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index 05509f3aaee8..8730fd475bf3 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -24,6 +24,9 @@ #include <linux/of_fdt.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/ucs2_string.h> #include <asm/early_ioremap.h> @@ -195,6 +198,96 @@ static void generic_ops_unregister(void) efivars_unregister(&generic_efivars); } +#if IS_ENABLED(CONFIG_ACPI) +#define EFIVAR_SSDT_NAME_MAX 16 +static char efivar_ssdt[EFIVAR_SSDT_NAME_MAX] __initdata; +static int __init efivar_ssdt_setup(char *str) +{ + if (strlen(str) < sizeof(efivar_ssdt)) + memcpy(efivar_ssdt, str, strlen(str)); + else + pr_warn("efivar_ssdt: name too long: %s\n", str); + return 0; +} +__setup("efivar_ssdt=", efivar_ssdt_setup); + +static __init int efivar_ssdt_iter(efi_char16_t *name, efi_guid_t vendor, + unsigned long name_size, void *data) +{ + struct efivar_entry *entry; + struct list_head *list = data; + char utf8_name[EFIVAR_SSDT_NAME_MAX]; + int limit = min_t(unsigned long, EFIVAR_SSDT_NAME_MAX, name_size); + + ucs2_as_utf8(utf8_name, name, limit - 1); + if (strncmp(utf8_name, efivar_ssdt, limit) != 0) + return 0; + + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + return 0; + + memcpy(entry->var.VariableName, name, name_size); + memcpy(&entry->var.VendorGuid, &vendor, sizeof(efi_guid_t)); + + efivar_entry_add(entry, list); + + return 0; +} + +static __init int efivar_ssdt_load(void) +{ + LIST_HEAD(entries); + struct efivar_entry *entry, *aux; + unsigned long size; + void *data; + int ret; + + ret = efivar_init(efivar_ssdt_iter, &entries, true, &entries); + + list_for_each_entry_safe(entry, aux, &entries, list) { + pr_info("loading SSDT from variable %s-%pUl\n", efivar_ssdt, + &entry->var.VendorGuid); + + list_del(&entry->list); + + ret = efivar_entry_size(entry, &size); + if (ret) { + pr_err("failed to get var size\n"); + goto free_entry; + } + + data = kmalloc(size, GFP_KERNEL); + if (!data) + goto free_entry; + + ret = efivar_entry_get(entry, NULL, &size, data); + if (ret) { + pr_err("failed to get var data\n"); + goto free_data; + } + + ret = acpi_load_table(data); + if (ret) { + pr_err("failed to load table: %d\n", ret); + goto free_data; + } + + goto free_entry; + +free_data: + kfree(data); + +free_entry: + kfree(entry); + } + + return ret; +} +#else +static inline int efivar_ssdt_load(void) { return 0; } +#endif + /* * We register the efi subsystem with the firmware subsystem and the * efivars subsystem with the efi subsystem, if the system was booted with @@ -218,6 +311,9 @@ static int __init efisubsys_init(void) if (error) goto err_put; + if (efi_enabled(EFI_RUNTIME_SERVICES)) + efivar_ssdt_load(); + error = sysfs_create_group(efi_kobj, &efi_subsys_attr_group); if (error) { pr_err("efi: Sysfs attribute export failed with error %d.\n", diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c index 03e04582791c..8263429e21b8 100644 --- a/drivers/firmware/psci.c +++ b/drivers/firmware/psci.c @@ -13,6 +13,7 @@ #define pr_fmt(fmt) "psci: " fmt +#include <linux/acpi.h> #include <linux/arm-smccc.h> #include <linux/cpuidle.h> #include <linux/errno.h> @@ -256,13 +257,6 @@ static int psci_dt_cpu_init_idle(struct device_node *cpu_node, int cpu) u32 *psci_states; struct device_node *state_node; - /* - * If the PSCI cpu_suspend function hook has not been initialized - * idle states must not be enabled, so bail out - */ - if (!psci_ops.cpu_suspend) - return -EOPNOTSUPP; - /* Count idle states */ while ((state_node = of_parse_phandle(cpu_node, "cpu-idle-states", count))) { @@ -310,11 +304,69 @@ free_mem: return ret; } +#ifdef CONFIG_ACPI +#include <acpi/processor.h> + +static int __maybe_unused psci_acpi_cpu_init_idle(unsigned int cpu) +{ + int i, count; + u32 *psci_states; + struct acpi_lpi_state *lpi; + struct acpi_processor *pr = per_cpu(processors, cpu); + + if (unlikely(!pr || !pr->flags.has_lpi)) + return -EINVAL; + + count = pr->power.count - 1; + if (count <= 0) + return -ENODEV; + + psci_states = kcalloc(count, sizeof(*psci_states), GFP_KERNEL); + if (!psci_states) + return -ENOMEM; + + for (i = 0; i < count; i++) { + u32 state; + + lpi = &pr->power.lpi_states[i + 1]; + /* + * Only bits[31:0] represent a PSCI power_state while + * bits[63:32] must be 0x0 as per ARM ACPI FFH Specification + */ + state = lpi->address; + if (!psci_power_state_is_valid(state)) { + pr_warn("Invalid PSCI power state %#x\n", state); + kfree(psci_states); + return -EINVAL; + } + psci_states[i] = state; + } + /* Idle states parsed correctly, initialize per-cpu pointer */ + per_cpu(psci_power_state, cpu) = psci_states; + return 0; +} +#else +static int __maybe_unused psci_acpi_cpu_init_idle(unsigned int cpu) +{ + return -EINVAL; +} +#endif + int psci_cpu_init_idle(unsigned int cpu) { struct device_node *cpu_node; int ret; + /* + * If the PSCI cpu_suspend function hook has not been initialized + * idle states must not be enabled, so bail out + */ + if (!psci_ops.cpu_suspend) + return -EOPNOTSUPP; + + if (!acpi_disabled) + return psci_acpi_cpu_init_idle(cpu); + cpu_node = of_get_cpu_node(cpu, NULL); if (!cpu_node) return -ENODEV; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index af11b658984d..74e5aeaf84f9 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -107,12 +107,11 @@ struct acpi_i2c_lookup { acpi_handle device_handle; }; -static int acpi_i2c_find_address(struct acpi_resource *ares, void *data) +static int acpi_i2c_fill_info(struct acpi_resource *ares, void *data) { struct acpi_i2c_lookup *lookup = data; struct i2c_board_info *info = lookup->info; struct acpi_resource_i2c_serialbus *sb; - acpi_handle adapter_handle; acpi_status status; if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) @@ -122,80 +121,102 @@ static int acpi_i2c_find_address(struct acpi_resource *ares, void *data) if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) return 1; - /* - * Extract the ResourceSource and make sure that the handle matches - * with the I2C adapter handle. - */ status = acpi_get_handle(lookup->device_handle, sb->resource_source.string_ptr, - &adapter_handle); - if (ACPI_SUCCESS(status) && adapter_handle == lookup->adapter_handle) { - info->addr = sb->slave_address; - if (sb->access_mode == ACPI_I2C_10BIT_MODE) - info->flags |= I2C_CLIENT_TEN; - } + &lookup->adapter_handle); + if (!ACPI_SUCCESS(status)) + return 1; + + info->addr = sb->slave_address; + if (sb->access_mode == ACPI_I2C_10BIT_MODE) + info->flags |= I2C_CLIENT_TEN; return 1; } -static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level, - void *data, void **return_value) +static int acpi_i2c_get_info(struct acpi_device *adev, + struct i2c_board_info *info, + acpi_handle *adapter_handle) { - struct i2c_adapter *adapter = data; struct list_head resource_list; - struct acpi_i2c_lookup lookup; struct resource_entry *entry; - struct i2c_board_info info; - struct acpi_device *adev; + struct acpi_i2c_lookup lookup; int ret; - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; - if (acpi_bus_get_status(adev) || !adev->status.present) - return AE_OK; + if (acpi_bus_get_status(adev) || !adev->status.present || + acpi_device_enumerated(adev)) + return -EINVAL; - memset(&info, 0, sizeof(info)); - info.fwnode = acpi_fwnode_handle(adev); + memset(info, 0, sizeof(*info)); + info->fwnode = acpi_fwnode_handle(adev); memset(&lookup, 0, sizeof(lookup)); - lookup.adapter_handle = ACPI_HANDLE(&adapter->dev); - lookup.device_handle = handle; - lookup.info = &info; + lookup.device_handle = acpi_device_handle(adev); + lookup.info = info; - /* - * Look up for I2cSerialBus resource with ResourceSource that - * matches with this adapter. - */ + /* Look up for I2cSerialBus resource */ INIT_LIST_HEAD(&resource_list); ret = acpi_dev_get_resources(adev, &resource_list, - acpi_i2c_find_address, &lookup); + acpi_i2c_fill_info, &lookup); acpi_dev_free_resource_list(&resource_list); - if (ret < 0 || !info.addr) - return AE_OK; + if (ret < 0 || !info->addr) + return -EINVAL; + + *adapter_handle = lookup.adapter_handle; /* Then fill IRQ number if any */ ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL); if (ret < 0) - return AE_OK; + return -EINVAL; resource_list_for_each_entry(entry, &resource_list) { if (resource_type(entry->res) == IORESOURCE_IRQ) { - info.irq = entry->res->start; + info->irq = entry->res->start; break; } } acpi_dev_free_resource_list(&resource_list); + strlcpy(info->type, dev_name(&adev->dev), sizeof(info->type)); + + return 0; +} + +static void acpi_i2c_register_device(struct i2c_adapter *adapter, + struct acpi_device *adev, + struct i2c_board_info *info) +{ adev->power.flags.ignore_parent = true; - strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type)); - if (!i2c_new_device(adapter, &info)) { + acpi_device_set_enumerated(adev); + + if (!i2c_new_device(adapter, info)) { adev->power.flags.ignore_parent = false; dev_err(&adapter->dev, "failed to add I2C device %s from ACPI\n", dev_name(&adev->dev)); } +} + +static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level, + void *data, void **return_value) +{ + struct i2c_adapter *adapter = data; + struct acpi_device *adev; + acpi_handle adapter_handle; + struct i2c_board_info info; + + if (acpi_bus_get_device(handle, &adev)) + return AE_OK; + + if (acpi_i2c_get_info(adev, &info, &adapter_handle)) + return AE_OK; + + if (adapter_handle != ACPI_HANDLE(&adapter->dev)) + return AE_OK; + + acpi_i2c_register_device(adapter, adev, &info); return AE_OK; } @@ -225,8 +246,80 @@ static void acpi_i2c_register_devices(struct i2c_adapter *adap) dev_warn(&adap->dev, "failed to enumerate I2C slaves\n"); } +static int acpi_i2c_match_adapter(struct device *dev, void *data) +{ + struct i2c_adapter *adapter = i2c_verify_adapter(dev); + + if (!adapter) + return 0; + + return ACPI_HANDLE(dev) == (acpi_handle)data; +} + +static int acpi_i2c_match_device(struct device *dev, void *data) +{ + return ACPI_COMPANION(dev) == data; +} + +static struct i2c_adapter *acpi_i2c_find_adapter_by_handle(acpi_handle handle) +{ + struct device *dev; + + dev = bus_find_device(&i2c_bus_type, NULL, handle, + acpi_i2c_match_adapter); + return dev ? i2c_verify_adapter(dev) : NULL; +} + +static struct i2c_client *acpi_i2c_find_client_by_adev(struct acpi_device *adev) +{ + struct device *dev; + + dev = bus_find_device(&i2c_bus_type, NULL, adev, acpi_i2c_match_device); + return dev ? i2c_verify_client(dev) : NULL; +} + +static int acpi_i2c_notify(struct notifier_block *nb, unsigned long value, + void *arg) +{ + struct acpi_device *adev = arg; + struct i2c_board_info info; + acpi_handle adapter_handle; + struct i2c_adapter *adapter; + struct i2c_client *client; + + switch (value) { + case ACPI_RECONFIG_DEVICE_ADD: + if (acpi_i2c_get_info(adev, &info, &adapter_handle)) + break; + + adapter = acpi_i2c_find_adapter_by_handle(adapter_handle); + if (!adapter) + break; + + acpi_i2c_register_device(adapter, adev, &info); + break; + case ACPI_RECONFIG_DEVICE_REMOVE: + if (!acpi_device_enumerated(adev)) + break; + + client = acpi_i2c_find_client_by_adev(adev); + if (!client) + break; + + i2c_unregister_device(client); + put_device(&client->dev); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block i2c_acpi_notifier = { + .notifier_call = acpi_i2c_notify, +}; #else /* CONFIG_ACPI */ static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { } +extern struct notifier_block i2c_acpi_notifier; #endif /* CONFIG_ACPI */ #ifdef CONFIG_ACPI_I2C_OPREGION @@ -1089,6 +1182,8 @@ void i2c_unregister_device(struct i2c_client *client) { if (client->dev.of_node) of_node_clear_flag(client->dev.of_node, OF_POPULATED); + if (ACPI_COMPANION(&client->dev)) + acpi_device_clear_enumerated(ACPI_COMPANION(&client->dev)); device_unregister(&client->dev); } EXPORT_SYMBOL_GPL(i2c_unregister_device); @@ -2117,6 +2212,8 @@ static int __init i2c_init(void) if (IS_ENABLED(CONFIG_OF_DYNAMIC)) WARN_ON(of_reconfig_notifier_register(&i2c_of_notifier)); + if (IS_ENABLED(CONFIG_ACPI)) + WARN_ON(acpi_reconfig_notifier_register(&i2c_acpi_notifier)); return 0; @@ -2132,6 +2229,8 @@ bus_err: static void __exit i2c_exit(void) { + if (IS_ENABLED(CONFIG_ACPI)) + WARN_ON(acpi_reconfig_notifier_unregister(&i2c_acpi_notifier)); if (IS_ENABLED(CONFIG_OF_DYNAMIC)) WARN_ON(of_reconfig_notifier_unregister(&i2c_of_notifier)); i2c_del_driver(&dummy_driver); diff --git a/drivers/of/of_numa.c b/drivers/of/of_numa.c index 0f2784bc1874..ed5a097f0801 100644 --- a/drivers/of/of_numa.c +++ b/drivers/of/of_numa.c @@ -91,8 +91,8 @@ static int __init of_numa_parse_memory_nodes(void) pr_debug("NUMA: base = %llx len = %llx, node = %u\n", rsrc.start, rsrc.end - rsrc.start + 1, nid); - r = numa_add_memblk(nid, rsrc.start, - rsrc.end - rsrc.start + 1); + + r = numa_add_memblk(nid, rsrc.start, rsrc.end + 1); if (r) break; } diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 77e6e45951f4..7589c8af4368 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -622,6 +622,8 @@ void spi_unregister_device(struct spi_device *spi) if (spi->dev.of_node) of_node_clear_flag(spi->dev.of_node, OF_POPULATED); + if (ACPI_COMPANION(&spi->dev)) + acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev)); device_unregister(&spi->dev); } EXPORT_SYMBOL_GPL(spi_unregister_device); @@ -1646,18 +1648,15 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data) return 1; } -static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level, - void *data, void **return_value) +static acpi_status acpi_register_spi_device(struct spi_master *master, + struct acpi_device *adev) { - struct spi_master *master = data; struct list_head resource_list; - struct acpi_device *adev; struct spi_device *spi; int ret; - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; - if (acpi_bus_get_status(adev) || !adev->status.present) + if (acpi_bus_get_status(adev) || !adev->status.present || + acpi_device_enumerated(adev)) return AE_OK; spi = spi_alloc_device(master); @@ -1683,6 +1682,8 @@ static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level, if (spi->irq < 0) spi->irq = acpi_dev_gpio_irq_get(adev, 0); + acpi_device_set_enumerated(adev); + adev->power.flags.ignore_parent = true; strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias)); if (spi_add_device(spi)) { @@ -1695,6 +1696,18 @@ static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level, return AE_OK; } +static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level, + void *data, void **return_value) +{ + struct spi_master *master = data; + struct acpi_device *adev; + + if (acpi_bus_get_device(handle, &adev)) + return AE_OK; + + return acpi_register_spi_device(master, adev); +} + static void acpi_register_spi_devices(struct spi_master *master) { acpi_status status; @@ -3107,6 +3120,77 @@ static struct notifier_block spi_of_notifier = { extern struct notifier_block spi_of_notifier; #endif /* IS_ENABLED(CONFIG_OF_DYNAMIC) */ +#if IS_ENABLED(CONFIG_ACPI) +static int spi_acpi_master_match(struct device *dev, const void *data) +{ + return ACPI_COMPANION(dev->parent) == data; +} + +static int spi_acpi_device_match(struct device *dev, void *data) +{ + return ACPI_COMPANION(dev) == data; +} + +static struct spi_master *acpi_spi_find_master_by_adev(struct acpi_device *adev) +{ + struct device *dev; + + dev = class_find_device(&spi_master_class, NULL, adev, + spi_acpi_master_match); + if (!dev) + return NULL; + + return container_of(dev, struct spi_master, dev); +} + +static struct spi_device *acpi_spi_find_device_by_adev(struct acpi_device *adev) +{ + struct device *dev; + + dev = bus_find_device(&spi_bus_type, NULL, adev, spi_acpi_device_match); + + return dev ? to_spi_device(dev) : NULL; +} + +static int acpi_spi_notify(struct notifier_block *nb, unsigned long value, + void *arg) +{ + struct acpi_device *adev = arg; + struct spi_master *master; + struct spi_device *spi; + + switch (value) { + case ACPI_RECONFIG_DEVICE_ADD: + master = acpi_spi_find_master_by_adev(adev->parent); + if (!master) + break; + + acpi_register_spi_device(master, adev); + put_device(&master->dev); + break; + case ACPI_RECONFIG_DEVICE_REMOVE: + if (!acpi_device_enumerated(adev)) + break; + + spi = acpi_spi_find_device_by_adev(adev); + if (!spi) + break; + + spi_unregister_device(spi); + put_device(&spi->dev); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block spi_acpi_notifier = { + .notifier_call = acpi_spi_notify, +}; +#else +extern struct notifier_block spi_acpi_notifier; +#endif + static int __init spi_init(void) { int status; @@ -3127,6 +3211,8 @@ static int __init spi_init(void) if (IS_ENABLED(CONFIG_OF_DYNAMIC)) WARN_ON(of_reconfig_notifier_register(&spi_of_notifier)); + if (IS_ENABLED(CONFIG_ACPI)) + WARN_ON(acpi_reconfig_notifier_register(&spi_acpi_notifier)); return 0; diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h index 94a37cd7fbda..d4b72944ccda 100644 --- a/include/acpi/acpi_numa.h +++ b/include/acpi/acpi_numa.h @@ -15,6 +15,10 @@ extern int pxm_to_node(int); extern int node_to_pxm(int); extern int acpi_map_pxm_to_node(int); extern unsigned char acpi_srat_revision; +extern int acpi_numa __initdata; + +extern void bad_srat(void); +extern int srat_disabled(void); #endif /* CONFIG_ACPI_NUMA */ #endif /* __ACP_NUMA_H */ diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h index dad8af3ebeb5..284965cbc9af 100644 --- a/include/acpi/cppc_acpi.h +++ b/include/acpi/cppc_acpi.h @@ -15,10 +15,9 @@ #define _CPPC_ACPI_H #include <linux/acpi.h> -#include <linux/mailbox_controller.h> -#include <linux/mailbox_client.h> #include <linux/types.h> +#include <acpi/pcc.h> #include <acpi/processor.h> /* Only support CPPCv2 for now. */ @@ -130,8 +129,4 @@ extern int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls); extern int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps); extern int acpi_get_psd_map(struct cpudata **); -/* Methods to interact with the PCC mailbox controller. */ -extern struct mbox_chan * - pcc_mbox_request_channel(struct mbox_client *, unsigned int); - #endif /* _CPPC_ACPI_H*/ diff --git a/include/acpi/pcc.h b/include/acpi/pcc.h new file mode 100644 index 000000000000..17a940a14477 --- /dev/null +++ b/include/acpi/pcc.h @@ -0,0 +1,29 @@ +/* + * PCC (Platform Communications Channel) methods + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#ifndef _PCC_H +#define _PCC_H + +#include <linux/mailbox_controller.h> +#include <linux/mailbox_client.h> + +#ifdef CONFIG_PCC +extern struct mbox_chan *pcc_mbox_request_channel(struct mbox_client *cl, + int subspace_id); +extern void pcc_mbox_free_channel(struct mbox_chan *chan); +#else +static inline struct mbox_chan *pcc_mbox_request_channel(struct mbox_client *cl, + int subspace_id) +{ + return NULL; +} +static inline void pcc_mbox_free_channel(struct mbox_chan *chan) { } +#endif + +#endif /* _PCC_H */ diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h index 45c2d6528829..93b61b1f2beb 100644 --- a/include/acpi/platform/aclinux.h +++ b/include/acpi/platform/aclinux.h @@ -73,6 +73,10 @@ #define ACPI_DEBUGGER #endif +#ifdef CONFIG_ACPI_DEBUG +#define ACPI_MUTEX_DEBUG +#endif + #include <linux/string.h> #include <linux/kernel.h> #include <linux/ctype.h> diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 6f1805dd5d3c..bfe6b2e10f3a 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -39,6 +39,7 @@ #define ACPI_CSTATE_SYSTEMIO 0 #define ACPI_CSTATE_FFH 1 #define ACPI_CSTATE_HALT 2 +#define ACPI_CSTATE_INTEGER 3 #define ACPI_CX_DESC_LEN 32 @@ -67,9 +68,25 @@ struct acpi_processor_cx { char desc[ACPI_CX_DESC_LEN]; }; +struct acpi_lpi_state { + u32 min_residency; + u32 wake_latency; /* worst case */ + u32 flags; + u32 arch_flags; + u32 res_cnt_freq; + u32 enable_parent_state; + u64 address; + u8 index; + u8 entry_method; + char desc[ACPI_CX_DESC_LEN]; +}; + struct acpi_processor_power { int count; - struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER]; + union { + struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER]; + struct acpi_lpi_state lpi_states[ACPI_PROCESSOR_MAX_POWER]; + }; int timer_broadcast_on_state; }; @@ -189,6 +206,7 @@ struct acpi_processor_flags { u8 bm_control:1; u8 bm_check:1; u8 has_cst:1; + u8 has_lpi:1; u8 power_setup_done:1; u8 bm_rld_set:1; u8 need_hotplug_init:1; @@ -242,7 +260,7 @@ extern int acpi_processor_get_performance_info(struct acpi_processor *pr); DECLARE_PER_CPU(struct acpi_processor *, processors); extern struct acpi_processor_errata errata; -#ifdef ARCH_HAS_POWER_INIT +#if defined(ARCH_HAS_POWER_INIT) && defined(CONFIG_ACPI_PROCESSOR_CSTATE) void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, unsigned int cpu); int acpi_processor_ffh_cstate_probe(unsigned int cpu, @@ -309,6 +327,7 @@ static inline int acpi_processor_get_bios_limit(int cpu, unsigned int *limit) /* in processor_core.c */ phys_cpuid_t acpi_get_phys_id(acpi_handle, int type, u32 acpi_id); +phys_cpuid_t acpi_map_madt_entry(u32 acpi_id); int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id); int acpi_get_cpuid(acpi_handle, int type, u32 acpi_id); @@ -371,7 +390,7 @@ extern struct cpuidle_driver acpi_idle_driver; #ifdef CONFIG_ACPI_PROCESSOR_IDLE int acpi_processor_power_init(struct acpi_processor *pr); int acpi_processor_power_exit(struct acpi_processor *pr); -int acpi_processor_cst_has_changed(struct acpi_processor *pr); +int acpi_processor_power_state_has_changed(struct acpi_processor *pr); int acpi_processor_hotplug(struct acpi_processor *pr); #else static inline int acpi_processor_power_init(struct acpi_processor *pr) @@ -384,7 +403,7 @@ static inline int acpi_processor_power_exit(struct acpi_processor *pr) return -ENODEV; } -static inline int acpi_processor_cst_has_changed(struct acpi_processor *pr) +static inline int acpi_processor_power_state_has_changed(struct acpi_processor *pr) { return -ENODEV; } diff --git a/include/acpi/video.h b/include/acpi/video.h index 5731ccb42585..4536bd345ab4 100644 --- a/include/acpi/video.h +++ b/include/acpi/video.h @@ -54,7 +54,7 @@ extern int acpi_video_get_levels(struct acpi_device *device, struct acpi_video_device_brightness **dev_br, int *pmax_level); #else -static inline int acpi_video_register(void) { return 0; } +static inline int acpi_video_register(void) { return -ENODEV; } static inline void acpi_video_unregister(void) { return; } static inline int acpi_video_get_edid(struct acpi_device *device, int type, int device_id, void **edid) diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 288fac5294f5..cc63aef07249 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -208,7 +208,6 @@ void acpi_boot_table_init (void); int acpi_mps_check (void); int acpi_numa_init (void); -void early_acpi_table_init(void *data, size_t size); int acpi_table_init (void); int acpi_table_parse(char *id, acpi_tbl_table_handler handler); int __init acpi_parse_entries(char *id, unsigned long table_size, @@ -232,12 +231,26 @@ int acpi_table_parse_madt(enum acpi_madt_type id, int acpi_parse_mcfg (struct acpi_table_header *header); void acpi_table_print_madt_entry (struct acpi_subtable_header *madt); -/* the following four functions are architecture-dependent */ +/* the following numa functions are architecture-dependent */ void acpi_numa_slit_init (struct acpi_table_slit *slit); + +#if defined(CONFIG_X86) || defined(CONFIG_IA64) void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa); +#else +static inline void +acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) { } +#endif + void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa); + +#ifdef CONFIG_ARM64 +void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa); +#else +static inline void +acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { } +#endif + int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma); -void acpi_numa_arch_fixup(void); #ifndef PHYS_CPUID_INVALID typedef u32 phys_cpuid_t; @@ -444,8 +457,12 @@ acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context); #define OSC_SB_HOTPLUG_OST_SUPPORT 0x00000008 #define OSC_SB_APEI_SUPPORT 0x00000010 #define OSC_SB_CPC_SUPPORT 0x00000020 +#define OSC_SB_CPCV2_SUPPORT 0x00000040 +#define OSC_SB_PCLPI_SUPPORT 0x00000080 +#define OSC_SB_OSLPI_SUPPORT 0x00000100 extern bool osc_sb_apei_support_acked; +extern bool osc_pc_lpi_support_confirmed; /* PCI Host Bridge _OSC: Capabilities DWORD 2: Support Field */ #define OSC_PCI_EXT_CONFIG_SUPPORT 0x00000001 @@ -532,6 +549,24 @@ void acpi_walk_dep_device_list(acpi_handle handle); struct platform_device *acpi_create_platform_device(struct acpi_device *); #define ACPI_PTR(_ptr) (_ptr) +static inline void acpi_device_set_enumerated(struct acpi_device *adev) +{ + adev->flags.visited = true; +} + +static inline void acpi_device_clear_enumerated(struct acpi_device *adev) +{ + adev->flags.visited = false; +} + +enum acpi_reconfig_event { + ACPI_RECONFIG_DEVICE_ADD = 0, + ACPI_RECONFIG_DEVICE_REMOVE, +}; + +int acpi_reconfig_notifier_register(struct notifier_block *nb); +int acpi_reconfig_notifier_unregister(struct notifier_block *nb); + #else /* !CONFIG_ACPI */ #define acpi_disabled 1 @@ -588,7 +623,6 @@ static inline const char *acpi_dev_name(struct acpi_device *adev) return NULL; } -static inline void early_acpi_table_init(void *data, size_t size) { } static inline void acpi_early_init(void) { } static inline void acpi_subsystem_init(void) { } @@ -678,6 +712,24 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev) #define ACPI_PTR(_ptr) (NULL) +static inline void acpi_device_set_enumerated(struct acpi_device *adev) +{ +} + +static inline void acpi_device_clear_enumerated(struct acpi_device *adev) +{ +} + +static inline int acpi_reconfig_notifier_register(struct notifier_block *nb) +{ + return -EINVAL; +} + +static inline int acpi_reconfig_notifier_unregister(struct notifier_block *nb) +{ + return -EINVAL; +} + #endif /* !CONFIG_ACPI */ #ifdef CONFIG_ACPI @@ -997,4 +1049,10 @@ static inline struct fwnode_handle *acpi_get_next_subnode(struct device *dev, #define acpi_probe_device_table(t) ({ int __r = 0; __r;}) #endif +#ifdef CONFIG_ACPI_TABLE_UPGRADE +void acpi_table_upgrade(void); +#else +static inline void acpi_table_upgrade(void) { } +#endif + #endif /*_LINUX_ACPI_H*/ diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 07b83d32f66c..bb31373c3478 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -252,4 +252,22 @@ static inline int cpuidle_register_governor(struct cpuidle_governor *gov) #define CPUIDLE_DRIVER_STATE_START 0 #endif +#define CPU_PM_CPU_IDLE_ENTER(low_level_idle_enter, idx) \ +({ \ + int __ret; \ + \ + if (!idx) { \ + cpu_do_idle(); \ + return idx; \ + } \ + \ + __ret = cpu_pm_enter(); \ + if (!__ret) { \ + __ret = low_level_idle_enter(idx); \ + cpu_pm_exit(); \ + } \ + \ + __ret ? -1 : idx; \ +}) + #endif /* _LINUX_CPUIDLE_H */ diff --git a/tools/power/acpi/Makefile.config b/tools/power/acpi/Makefile.config index 552af68d5414..a538ff44b108 100644 --- a/tools/power/acpi/Makefile.config +++ b/tools/power/acpi/Makefile.config @@ -54,9 +54,10 @@ INSTALL_SCRIPT = ${INSTALL_PROGRAM} # to something more interesting, like "arm-linux-". If you want # to compile vs uClibc, that can be done here as well. CROSS = #/usr/i386-linux-uclibc/usr/bin/i386-uclibc- -CC = $(CROSS)gcc -LD = $(CROSS)gcc -STRIP = $(CROSS)strip +CROSS_COMPILE ?= $(CROSS) +CC = $(CROSS_COMPILE)gcc +LD = $(CROSS_COMPILE)gcc +STRIP = $(CROSS_COMPILE)strip HOSTCC = gcc # check if compiler option is supported |