summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/mips/Kconfig1
-rw-r--r--arch/mips/lantiq/Kconfig9
-rw-r--r--arch/mips/lantiq/Makefile4
-rw-r--r--arch/mips/lantiq/dts/Makefile4
-rw-r--r--arch/mips/lantiq/dts/danube.dtsi105
-rw-r--r--arch/mips/lantiq/dts/easy50712.dts113
-rw-r--r--arch/mips/lantiq/prom.c57
-rw-r--r--arch/mips/lantiq/prom.h2
-rw-r--r--arch/mips/lantiq/setup.c43
-rw-r--r--arch/mips/lantiq/xway/ebu.c4
-rw-r--r--arch/mips/lantiq/xway/reset.c29
11 files changed, 294 insertions, 77 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7c855623a0f9..fbb56394c675 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -229,6 +229,7 @@ config LANTIQ
select SWAP_IO_SPACE
select BOOT_RAW
select HAVE_CLK
+ select USE_OF
config LASAT
bool "LASAT Networks platforms"
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
index 2780461e3258..9485fe54752b 100644
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -18,4 +18,13 @@ config SOC_XWAY
select HW_HAS_PCI
endchoice
+
+choice
+ prompt "Devicetree"
+
+config DT_EASY50712
+ bool "Easy50712"
+ depends on SOC_XWAY
+endchoice
+
endif
diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
index a268391eb45e..16f1c758616b 100644
--- a/arch/mips/lantiq/Makefile
+++ b/arch/mips/lantiq/Makefile
@@ -4,7 +4,9 @@
# under the terms of the GNU General Public License version 2 as published
# by the Free Software Foundation.
-obj-y := irq.o setup.o clk.o prom.o
+obj-y := irq.o clk.o prom.o
+
+obj-y += dts/
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/lantiq/dts/Makefile b/arch/mips/lantiq/dts/Makefile
new file mode 100644
index 000000000000..674fca45f72d
--- /dev/null
+++ b/arch/mips/lantiq/dts/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_DT_EASY50712) := easy50712.dtb.o
+
+$(obj)/%.dtb: $(obj)/%.dts
+ $(call if_changed,dtc)
diff --git a/arch/mips/lantiq/dts/danube.dtsi b/arch/mips/lantiq/dts/danube.dtsi
new file mode 100644
index 000000000000..3a4520f009cf
--- /dev/null
+++ b/arch/mips/lantiq/dts/danube.dtsi
@@ -0,0 +1,105 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,xway", "lantiq,danube";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips24Kc";
+ };
+ };
+
+ biu@1F800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,biu", "simple-bus";
+ reg = <0x1F800000 0x800000>;
+ ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+ icu0: icu@80200 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,icu";
+ reg = <0x80200 0x120>;
+ };
+
+ watchdog@803F0 {
+ compatible = "lantiq,wdt";
+ reg = <0x803F0 0x10>;
+ };
+ };
+
+ sram@1F000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sram";
+ reg = <0x1F000000 0x800000>;
+ ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+ eiu0: eiu@101000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent;
+ compatible = "lantiq,eiu-xway";
+ reg = <0x101000 0x1000>;
+ };
+
+ pmu0: pmu@102000 {
+ compatible = "lantiq,pmu-xway";
+ reg = <0x102000 0x1000>;
+ };
+
+ cgu0: cgu@103000 {
+ compatible = "lantiq,cgu-xway";
+ reg = <0x103000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ rcu0: rcu@203000 {
+ compatible = "lantiq,rcu-xway";
+ reg = <0x203000 0x1000>;
+ };
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xEEFFFFF>;
+ reg = <0x10000000 0xEF00000>;
+
+ gptu@E100A00 {
+ compatible = "lantiq,gptu-xway";
+ reg = <0xE100A00 0x100>;
+ };
+
+ serial@E100C00 {
+ compatible = "lantiq,asc";
+ reg = <0xE100C00 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <112 113 114>;
+ };
+
+ dma0: dma@E104100 {
+ compatible = "lantiq,dma-xway";
+ reg = <0xE104100 0x800>;
+ };
+
+ ebu0: ebu@E105300 {
+ compatible = "lantiq,ebu-xway";
+ reg = <0xE105300 0x100>;
+ };
+
+ pci0: pci@E105400 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ compatible = "lantiq,pci-xway";
+ bus-range = <0x0 0x0>;
+ ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
+ 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+ reg = <0x7000000 0x8000 /* config space */
+ 0xE105400 0x400>; /* pci bridge */
+ };
+ };
+};
diff --git a/arch/mips/lantiq/dts/easy50712.dts b/arch/mips/lantiq/dts/easy50712.dts
new file mode 100644
index 000000000000..68c17310bc82
--- /dev/null
+++ b/arch/mips/lantiq/dts/easy50712.dts
@@ -0,0 +1,113 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ memory@0 {
+ reg = <0x0 0x2000000>;
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ localbus@0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+ 1 0 0x4000000 0x4000010>; /* addsel1 */
+ compatible = "lantiq,localbus", "simple-bus";
+
+ nor-boot@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>; /* 64 KB */
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>; /* 64 KB */
+ };
+
+ partition@20000 {
+ label = "linux";
+ reg = <0x20000 0x3d0000>;
+ };
+
+ partition@400000 {
+ label = "rootfs";
+ reg = <0x400000 0x400000>;
+ };
+ };
+ };
+
+ gpio: pinmux@E100B10 {
+ compatible = "lantiq,pinctrl-xway";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xE100B10 0xA0>;
+
+ state_default: pinmux {
+ stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ };
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+ pci {
+ lantiq,groups = "gnt1";
+ lantiq,function = "pci";
+ };
+ conf_out {
+ lantiq,pins = "io4", "io5", "io6"; /* stp */
+ lantiq,open-drain;
+ lantiq,pull = <0>;
+ };
+ };
+ };
+
+ etop@E180000 {
+ compatible = "lantiq,etop-xway";
+ reg = <0xE180000 0x40000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <73 78>;
+ phy-mode = "rmii";
+ mac-address = [ 00 11 22 33 44 55 ];
+ };
+
+ stp0: stp@E100BB0 {
+ #gpio-cells = <2>;
+ compatible = "lantiq,gpio-stp-xway";
+ gpio-controller;
+ reg = <0xE100BB0 0x40>;
+
+ lantiq,shadow = <0xfff>;
+ lantiq,groups = <0x3>;
+ };
+
+ pci@E105400 {
+ lantiq,bus-clock = <33333333>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+ >;
+ gpios-reset = <&gpio 21 0>;
+ req-mask = <0x1>; /* GNT1 */
+ };
+
+ };
+};
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index cd568921f191..413ed53a4ae1 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -8,6 +8,7 @@
#include <linux/export.h>
#include <linux/clk.h>
+#include <linux/of_platform.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
@@ -16,13 +17,15 @@
#include "prom.h"
#include "clk.h"
-static struct ltq_soc_info soc_info;
+/* access to the ebu needs to be locked between different drivers */
+DEFINE_SPINLOCK(ebu_lock);
+EXPORT_SYMBOL_GPL(ebu_lock);
-unsigned int ltq_get_cpu_ver(void)
-{
- return soc_info.rev;
-}
-EXPORT_SYMBOL(ltq_get_cpu_ver);
+/*
+ * this struct is filled by the soc specific detection code and holds
+ * information about the specific soc type, revision and name
+ */
+static struct ltq_soc_info soc_info;
unsigned int ltq_get_soc_type(void)
{
@@ -57,16 +60,28 @@ static void __init prom_init_cmdline(void)
}
}
-void __init prom_init(void)
+void __init plat_mem_setup(void)
{
- struct clk *clk;
+ ioport_resource.start = IOPORT_RESOURCE_START;
+ ioport_resource.end = IOPORT_RESOURCE_END;
+ iomem_resource.start = IOMEM_RESOURCE_START;
+ iomem_resource.end = IOMEM_RESOURCE_END;
+
+ set_io_port_base((unsigned long) KSEG1);
+
+ /*
+ * Load the builtin devicetree. This causes the chosen node to be
+ * parsed resulting in our memory appearing
+ */
+ __dt_setup_arch(&__dtb_start);
+}
+void __init prom_init(void)
+{
+ /* call the soc specific detetcion code and get it to fill soc_info */
ltq_soc_detect(&soc_info);
- clk_init();
- clk = clk_get(0, "cpu");
- snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev1.%d",
- soc_info.name, soc_info.rev);
- clk_put(clk);
+ snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev %s",
+ soc_info.name, soc_info.rev_type);
soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
pr_info("SoC: %s\n", soc_info.sys_type);
prom_init_cmdline();
@@ -76,3 +91,19 @@ void __init prom_init(void)
panic("failed to register_vsmp_smp_ops()");
#endif
}
+
+int __init plat_of_setup(void)
+{
+ static struct of_device_id of_ids[3];
+
+ if (!of_have_populated_dt())
+ panic("device tree not present");
+
+ strncpy(of_ids[0].compatible, soc_info.compatible,
+ sizeof(of_ids[0].compatible));
+ strncpy(of_ids[1].compatible, "simple-bus",
+ sizeof(of_ids[1].compatible));
+ return of_platform_bus_probe(NULL, of_ids, NULL);
+}
+
+arch_initcall(plat_of_setup);
diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h
index f7c2a7984db7..a3fa1a2bfaae 100644
--- a/arch/mips/lantiq/prom.h
+++ b/arch/mips/lantiq/prom.h
@@ -26,4 +26,6 @@ struct ltq_soc_info {
extern void ltq_soc_detect(struct ltq_soc_info *i);
extern void ltq_soc_init(void);
+extern struct boot_param_header __dtb_start;
+
#endif
diff --git a/arch/mips/lantiq/setup.c b/arch/mips/lantiq/setup.c
deleted file mode 100644
index f1c605ab8081..000000000000
--- a/arch/mips/lantiq/setup.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <asm/bootinfo.h>
-
-#include <lantiq_soc.h>
-
-#include "prom.h"
-
-void __init plat_mem_setup(void)
-{
- /* assume 16M as default incase uboot fails to pass proper ramsize */
- unsigned long memsize = 16;
- char **envp = (char **) KSEG1ADDR(fw_arg2);
-
- ioport_resource.start = IOPORT_RESOURCE_START;
- ioport_resource.end = IOPORT_RESOURCE_END;
- iomem_resource.start = IOMEM_RESOURCE_START;
- iomem_resource.end = IOMEM_RESOURCE_END;
-
- set_io_port_base((unsigned long) KSEG1);
-
- while (*envp) {
- char *e = (char *)KSEG1ADDR(*envp);
- if (!strncmp(e, "memsize=", 8)) {
- e += 8;
- if (strict_strtoul(e, 0, &memsize))
- pr_warn("bad memsize specified\n");
- }
- envp++;
- }
- memsize *= 1024 * 1024;
- add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c
index 862e3e830680..419b47b70f32 100644
--- a/arch/mips/lantiq/xway/ebu.c
+++ b/arch/mips/lantiq/xway/ebu.c
@@ -14,10 +14,6 @@
#include <lantiq_soc.h>
-/* all access to the ebu must be locked */
-DEFINE_SPINLOCK(ebu_lock);
-EXPORT_SYMBOL_GPL(ebu_lock);
-
static struct resource ltq_ebu_resource = {
.name = "ebu",
.start = LTQ_EBU_BASE_ADDR,
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
index 3327211746ac..22c55f73aa9d 100644
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -37,13 +37,6 @@
#define RCU_BOOT_SEL_SHIFT 26
#define RCU_BOOT_SEL_MASK 0x7
-static struct resource ltq_rcu_resource = {
- .name = "rcu",
- .start = LTQ_RCU_BASE_ADDR,
- .end = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
/* remapped base addr of the reset control unit */
static void __iomem *ltq_rcu_membase;
@@ -91,17 +84,21 @@ static void ltq_machine_power_off(void)
static int __init mips_reboot_setup(void)
{
- /* insert and request the memory region */
- if (insert_resource(&iomem_resource, &ltq_rcu_resource) < 0)
- panic("Failed to insert rcu memory");
+ struct resource res;
+ struct device_node *np =
+ of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway");
+
+ /* check if all the reset register range is available */
+ if (!np)
+ panic("Failed to load reset resources from devicetree");
+
+ if (of_address_to_resource(np, 0, &res))
+ panic("Failed to get rcu memory range");
- if (request_mem_region(ltq_rcu_resource.start,
- resource_size(&ltq_rcu_resource), "rcu") < 0)
- panic("Failed to request rcu memory");
+ if (request_mem_region(res.start, resource_size(&res), res.name) < 0)
+ pr_err("Failed to request rcu memory");
- /* remap rcu register range */
- ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start,
- resource_size(&ltq_rcu_resource));
+ ltq_rcu_membase = ioremap_nocache(res.start, resource_size(&res));
if (!ltq_rcu_membase)
panic("Failed to remap core memory");
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 06:08:12 +0300