diff options
| -rw-r--r-- | drivers/firmware/Makefile | 3 | ||||
| -rw-r--r-- | drivers/firmware/qcom_scm-32.c | 503 | ||||
| -rw-r--r-- | drivers/firmware/qcom_scm.c | 474 | ||||
| -rw-r--r-- | drivers/firmware/qcom_scm.h | 47 | ||||
| -rw-r--r-- | drivers/soc/qcom/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/soc/qcom/Makefile | 1 | ||||
| -rw-r--r-- | drivers/soc/qcom/spm.c | 385 | ||||
| -rw-r--r-- | include/linux/qcom_scm.h | 13 |
8 files changed, 995 insertions, 438 deletions
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 3fdd3912709a..3001f1ae1062 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -12,7 +12,8 @@ obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o obj-$(CONFIG_QCOM_SCM) += qcom_scm.o -CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) +obj-$(CONFIG_QCOM_SCM) += qcom_scm-32.o +CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) obj-$(CONFIG_GOOGLE_FIRMWARE) += google/ obj-$(CONFIG_EFI) += efi/ diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c new file mode 100644 index 000000000000..1bd6f9c34331 --- /dev/null +++ b/drivers/firmware/qcom_scm-32.c @@ -0,0 +1,503 @@ +/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved. + * Copyright (C) 2015 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/qcom_scm.h> + +#include <asm/outercache.h> +#include <asm/cacheflush.h> + +#include "qcom_scm.h" + +#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00 +#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01 +#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08 +#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20 + +#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04 +#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02 +#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10 +#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40 + +struct qcom_scm_entry { + int flag; + void *entry; +}; + +static struct qcom_scm_entry qcom_scm_wb[] = { + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 }, + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 }, + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 }, + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 }, +}; + +static DEFINE_MUTEX(qcom_scm_lock); + +/** + * struct qcom_scm_command - one SCM command buffer + * @len: total available memory for command and response + * @buf_offset: start of command buffer + * @resp_hdr_offset: start of response buffer + * @id: command to be executed + * @buf: buffer returned from qcom_scm_get_command_buffer() + * + * An SCM command is laid out in memory as follows: + * + * ------------------- <--- struct qcom_scm_command + * | command header | + * ------------------- <--- qcom_scm_get_command_buffer() + * | command buffer | + * ------------------- <--- struct qcom_scm_response and + * | response header | qcom_scm_command_to_response() + * ------------------- <--- qcom_scm_get_response_buffer() + * | response buffer | + * ------------------- + * + * There can be arbitrary padding between the headers and buffers so + * you should always use the appropriate qcom_scm_get_*_buffer() routines + * to access the buffers in a safe manner. + */ +struct qcom_scm_command { + __le32 len; + __le32 buf_offset; + __le32 resp_hdr_offset; + __le32 id; + __le32 buf[0]; +}; + +/** + * struct qcom_scm_response - one SCM response buffer + * @len: total available memory for response + * @buf_offset: start of response data relative to start of qcom_scm_response + * @is_complete: indicates if the command has finished processing + */ +struct qcom_scm_response { + __le32 len; + __le32 buf_offset; + __le32 is_complete; +}; + +/** + * alloc_qcom_scm_command() - Allocate an SCM command + * @cmd_size: size of the command buffer + * @resp_size: size of the response buffer + * + * Allocate an SCM command, including enough room for the command + * and response headers as well as the command and response buffers. + * + * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails. + */ +static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size) +{ + struct qcom_scm_command *cmd; + size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size + + resp_size; + u32 offset; + + cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); + if (cmd) { + cmd->len = cpu_to_le32(len); + offset = offsetof(struct qcom_scm_command, buf); + cmd->buf_offset = cpu_to_le32(offset); + cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size); + } + return cmd; +} + +/** + * free_qcom_scm_command() - Free an SCM command + * @cmd: command to free + * + * Free an SCM command. + */ +static inline void free_qcom_scm_command(struct qcom_scm_command *cmd) +{ + kfree(cmd); +} + +/** + * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response + * @cmd: command + * + * Returns a pointer to a response for a command. + */ +static inline struct qcom_scm_response *qcom_scm_command_to_response( + const struct qcom_scm_command *cmd) +{ + return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset); +} + +/** + * qcom_scm_get_command_buffer() - Get a pointer to a command buffer + * @cmd: command + * + * Returns a pointer to the command buffer of a command. + */ +static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd) +{ + return (void *)cmd->buf; +} + +/** + * qcom_scm_get_response_buffer() - Get a pointer to a response buffer + * @rsp: response + * + * Returns a pointer to a response buffer of a response. + */ +static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp) +{ + return (void *)rsp + le32_to_cpu(rsp->buf_offset); +} + +static int qcom_scm_remap_error(int err) +{ + pr_err("qcom_scm_call failed with error code %d\n", err); + switch (err) { + case QCOM_SCM_ERROR: + return -EIO; + case QCOM_SCM_EINVAL_ADDR: + case QCOM_SCM_EINVAL_ARG: + return -EINVAL; + case QCOM_SCM_EOPNOTSUPP: + return -EOPNOTSUPP; + case QCOM_SCM_ENOMEM: + return -ENOMEM; + } + return -EINVAL; +} + +static u32 smc(u32 cmd_addr) +{ + int context_id; + register u32 r0 asm("r0") = 1; + register u32 r1 asm("r1") = (u32)&context_id; + register u32 r2 asm("r2") = cmd_addr; + do { + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r0") + __asmeq("%2", "r1") + __asmeq("%3", "r2") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0) + : "r" (r0), "r" (r1), "r" (r2) + : "r3"); + } while (r0 == QCOM_SCM_INTERRUPTED); + + return r0; +} + +static int __qcom_scm_call(const struct qcom_scm_command *cmd) +{ + int ret; + u32 cmd_addr = virt_to_phys(cmd); + + /* + * Flush the command buffer so that the secure world sees + * the correct data. + */ + __cpuc_flush_dcache_area((void *)cmd, cmd->len); + outer_flush_range(cmd_addr, cmd_addr + cmd->len); + + ret = smc(cmd_addr); + if (ret < 0) + ret = qcom_scm_remap_error(ret); + + return ret; +} + +static void qcom_scm_inv_range(unsigned long start, unsigned long end) +{ + u32 cacheline_size, ctr; + + asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); + cacheline_size = 4 << ((ctr >> 16) & 0xf); + + start = round_down(start, cacheline_size); + end = round_up(end, cacheline_size); + outer_inv_range(start, end); + while (start < end) { + asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) + : "memory"); + start += cacheline_size; + } + dsb(); + isb(); +} + +/** + * qcom_scm_call() - Send an SCM command + * @svc_id: service identifier + * @cmd_id: command identifier + * @cmd_buf: command buffer + * @cmd_len: length of the command buffer + * @resp_buf: response buffer + * @resp_len: length of the response buffer + * + * Sends a command to the SCM and waits for the command to finish processing. + * + * A note on cache maintenance: + * Note that any buffers that are expected to be accessed by the secure world + * must be flushed before invoking qcom_scm_call and invalidated in the cache + * immediately after qcom_scm_call returns. Cache maintenance on the command + * and response buffers is taken care of by qcom_scm_call; however, callers are + * responsible for any other cached buffers passed over to the secure world. + */ +static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, + size_t cmd_len, void *resp_buf, size_t resp_len) +{ + int ret; + struct qcom_scm_command *cmd; + struct qcom_scm_response *rsp; + unsigned long start, end; + + cmd = alloc_qcom_scm_command(cmd_len, resp_len); + if (!cmd) + return -ENOMEM; + + cmd->id = cpu_to_le32((svc_id << 10) | cmd_id); + if (cmd_buf) + memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len); + + mutex_lock(&qcom_scm_lock); + ret = __qcom_scm_call(cmd); + mutex_unlock(&qcom_scm_lock); + if (ret) + goto out; + + rsp = qcom_scm_command_to_response(cmd); + start = (unsigned long)rsp; + + do { + qcom_scm_inv_range(start, start + sizeof(*rsp)); + } while (!rsp->is_complete); + + end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len; + qcom_scm_inv_range(start, end); + + if (resp_buf) + memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len); +out: + free_qcom_scm_command(cmd); + return ret; +} + +#define SCM_CLASS_REGISTER (0x2 << 8) +#define SCM_MASK_IRQS BIT(5) +#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \ + SCM_CLASS_REGISTER | \ + SCM_MASK_IRQS | \ + (n & 0xf)) + +/** + * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument + * @svc_id: service identifier + * @cmd_id: command identifier + * @arg1: first argument + * + * This shall only be used with commands that are guaranteed to be + * uninterruptable, atomic and SMP safe. + */ +static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1) +{ + int context_id; + + register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1); + register u32 r1 asm("r1") = (u32)&context_id; + register u32 r2 asm("r2") = arg1; + + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r0") + __asmeq("%2", "r1") + __asmeq("%3", "r2") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0) + : "r" (r0), "r" (r1), "r" (r2) + : "r3"); + return r0; +} + +u32 qcom_scm_get_version(void) +{ + int context_id; + static u32 version = -1; + register u32 r0 asm("r0"); + register u32 r1 asm("r1"); + + if (version != -1) + return version; + + mutex_lock(&qcom_scm_lock); + + r0 = 0x1 << 8; + r1 = (u32)&context_id; + do { + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r1") + __asmeq("%2", "r0") + __asmeq("%3", "r1") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0), "=r" (r1) + : "r" (r0), "r" (r1) + : "r2", "r3"); + } while (r0 == QCOM_SCM_INTERRUPTED); + + version = r1; + mutex_unlock(&qcom_scm_lock); + + return version; +} +EXPORT_SYMBOL(qcom_scm_get_version); + +/* + * Set the cold/warm boot address for one of the CPU cores. + */ +static int qcom_scm_set_boot_addr(u32 addr, int flags) +{ + struct { + __le32 flags; + __le32 addr; + } cmd; + + cmd.addr = cpu_to_le32(addr); + cmd.flags = cpu_to_le32(flags); + return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR, + &cmd, sizeof(cmd), NULL, 0); +} + +/** + * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus + * @entry: Entry point function for the cpus + * @cpus: The cpumask of cpus that will use the entry point + * + * Set the cold boot address of the cpus. Any cpu outside the supported + * range would be removed from the cpu present mask. + */ +int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) +{ + int flags = 0; + int cpu; + int scm_cb_flags[] = { + QCOM_SCM_FLAG_COLDBOOT_CPU0, + QCOM_SCM_FLAG_COLDBOOT_CPU1, + QCOM_SCM_FLAG_COLDBOOT_CPU2, + QCOM_SCM_FLAG_COLDBOOT_CPU3, + }; + + if (!cpus || (cpus && cpumask_empty(cpus))) + return -EINVAL; + + for_each_cpu(cpu, cpus) { + if (cpu < ARRAY_SIZE(scm_cb_flags)) + flags |= scm_cb_flags[cpu]; + else + set_cpu_present(cpu, false); + } + + return qcom_scm_set_boot_addr(virt_to_phys(entry), flags); +} + +/** + * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus + * @entry: Entry point function for the cpus + * @cpus: The cpumask of cpus that will use the entry point + * + * Set the Linux entry point for the SCM to transfer control to when coming + * out of a power down. CPU power down may be executed on cpuidle or hotplug. + */ +int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) +{ + int ret; + int flags = 0; + int cpu; + + /* + * Reassign only if we are switching from hotplug entry point + * to cpuidle entry point or vice versa. + */ + for_each_cpu(cpu, cpus) { + if (entry == qcom_scm_wb[cpu].entry) + continue; + flags |= qcom_scm_wb[cpu].flag; + } + + /* No change in entry function */ + if (!flags) + return 0; + + ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags); + if (!ret) { + for_each_cpu(cpu, cpus) + qcom_scm_wb[cpu].entry = entry; + } + + return ret; +} + +/** + * qcom_scm_cpu_power_down() - Power down the cpu + * @flags - Flags to flush cache + * + * This is an end point to power down cpu. If there was a pending interrupt, + * the control would return from this function, otherwise, the cpu jumps to the + * warm boot entry point set for this cpu upon reset. + */ +void __qcom_scm_cpu_power_down(u32 flags) +{ + qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC, + flags & QCOM_SCM_FLUSH_FLAG_MASK); +} + +int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id) +{ + int ret; + u32 svc_cmd = (svc_id << 10) | cmd_id; + u32 ret_val = 0; + + ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd, + sizeof(svc_cmd), &ret_val, sizeof(ret_val)); + if (ret) + return ret; + + return ret_val; +} + +int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp) +{ + if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT) + return -ERANGE; + + return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, + req, req_cnt * sizeof(*req), resp, sizeof(*resp)); +} diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index 994b50fd997c..45c008d68891 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -1,4 +1,4 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. +/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved. * Copyright (C) 2015 Linaro Ltd. * * This program is free software; you can redistribute it and/or modify @@ -16,393 +16,12 @@ * 02110-1301, USA. */ -#include <linux/slab.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/errno.h> -#include <linux/err.h> +#include <linux/cpumask.h> +#include <linux/export.h> +#include <linux/types.h> #include <linux/qcom_scm.h> -#include <asm/outercache.h> -#include <asm/cacheflush.h> - - -#define QCOM_SCM_ENOMEM -5 -#define QCOM_SCM_EOPNOTSUPP -4 -#define QCOM_SCM_EINVAL_ADDR -3 -#define QCOM_SCM_EINVAL_ARG -2 -#define QCOM_SCM_ERROR -1 -#define QCOM_SCM_INTERRUPTED 1 - -#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00 -#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01 -#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08 -#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20 - -#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04 -#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02 -#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10 -#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40 - -struct qcom_scm_entry { - int flag; - void *entry; -}; - -static struct qcom_scm_entry qcom_scm_wb[] = { - { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 }, - { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 }, - { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 }, - { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 }, -}; - -static DEFINE_MUTEX(qcom_scm_lock); - -/** - * struct qcom_scm_command - one SCM command buffer - * @len: total available memory for command and response - * @buf_offset: start of command buffer - * @resp_hdr_offset: start of response buffer - * @id: command to be executed - * @buf: buffer returned from qcom_scm_get_command_buffer() - * - * An SCM command is laid out in memory as follows: - * - * ------------------- <--- struct qcom_scm_command - * | command header | - * ------------------- <--- qcom_scm_get_command_buffer() - * | command buffer | - * ------------------- <--- struct qcom_scm_response and - * | response header | qcom_scm_command_to_response() - * ------------------- <--- qcom_scm_get_response_buffer() - * | response buffer | - * ------------------- - * - * There can be arbitrary padding between the headers and buffers so - * you should always use the appropriate qcom_scm_get_*_buffer() routines - * to access the buffers in a safe manner. - */ -struct qcom_scm_command { - __le32 len; - __le32 buf_offset; - __le32 resp_hdr_offset; - __le32 id; - __le32 buf[0]; -}; - -/** - * struct qcom_scm_response - one SCM response buffer - * @len: total available memory for response - * @buf_offset: start of response data relative to start of qcom_scm_response - * @is_complete: indicates if the command has finished processing - */ -struct qcom_scm_response { - __le32 len; - __le32 buf_offset; - __le32 is_complete; -}; - -/** - * alloc_qcom_scm_command() - Allocate an SCM command - * @cmd_size: size of the command buffer - * @resp_size: size of the response buffer - * - * Allocate an SCM command, including enough room for the command - * and response headers as well as the command and response buffers. - * - * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails. - */ -static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size) -{ - struct qcom_scm_command *cmd; - size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size + - resp_size; - u32 offset; - - cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); - if (cmd) { - cmd->len = cpu_to_le32(len); - offset = offsetof(struct qcom_scm_command, buf); - cmd->buf_offset = cpu_to_le32(offset); - cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size); - } - return cmd; -} - -/** - * free_qcom_scm_command() - Free an SCM command - * @cmd: command to free - * - * Free an SCM command. - */ -static inline void free_qcom_scm_command(struct qcom_scm_command *cmd) -{ - kfree(cmd); -} - -/** - * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response - * @cmd: command - * - * Returns a pointer to a response for a command. - */ -static inline struct qcom_scm_response *qcom_scm_command_to_response( - const struct qcom_scm_command *cmd) -{ - return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset); -} - -/** - * qcom_scm_get_command_buffer() - Get a pointer to a command buffer - * @cmd: command - * - * Returns a pointer to the command buffer of a command. - */ -static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd) -{ - return (void *)cmd->buf; -} - -/** - * qcom_scm_get_response_buffer() - Get a pointer to a response buffer - * @rsp: response - * - * Returns a pointer to a response buffer of a response. - */ -static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp) -{ - return (void *)rsp + le32_to_cpu(rsp->buf_offset); -} - -static int qcom_scm_remap_error(int err) -{ - pr_err("qcom_scm_call failed with error code %d\n", err); - switch (err) { - case QCOM_SCM_ERROR: - return -EIO; - case QCOM_SCM_EINVAL_ADDR: - case QCOM_SCM_EINVAL_ARG: - return -EINVAL; - case QCOM_SCM_EOPNOTSUPP: - return -EOPNOTSUPP; - case QCOM_SCM_ENOMEM: - return -ENOMEM; - } - return -EINVAL; -} - -static u32 smc(u32 cmd_addr) -{ - int context_id; - register u32 r0 asm("r0") = 1; - register u32 r1 asm("r1") = (u32)&context_id; - register u32 r2 asm("r2") = cmd_addr; - do { - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r0") - __asmeq("%2", "r1") - __asmeq("%3", "r2") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0) - : "r" (r0), "r" (r1), "r" (r2) - : "r3"); - } while (r0 == QCOM_SCM_INTERRUPTED); - - return r0; -} - -static int __qcom_scm_call(const struct qcom_scm_command *cmd) -{ - int ret; - u32 cmd_addr = virt_to_phys(cmd); - - /* - * Flush the command buffer so that the secure world sees - * the correct data. - */ - __cpuc_flush_dcache_area((void *)cmd, cmd->len); - outer_flush_range(cmd_addr, cmd_addr + cmd->len); - - ret = smc(cmd_addr); - if (ret < 0) - ret = qcom_scm_remap_error(ret); - - return ret; -} - -static void qcom_scm_inv_range(unsigned long start, unsigned long end) -{ - u32 cacheline_size, ctr; - - asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); - cacheline_size = 4 << ((ctr >> 16) & 0xf); - - start = round_down(start, cacheline_size); - end = round_up(end, cacheline_size); - outer_inv_range(start, end); - while (start < end) { - asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) - : "memory"); - start += cacheline_size; - } - dsb(); - isb(); -} - -/** - * qcom_scm_call() - Send an SCM command - * @svc_id: service identifier - * @cmd_id: command identifier - * @cmd_buf: command buffer - * @cmd_len: length of the command buffer - * @resp_buf: response buffer - * @resp_len: length of the response buffer - * - * Sends a command to the SCM and waits for the command to finish processing. - * - * A note on cache maintenance: - * Note that any buffers that are expected to be accessed by the secure world - * must be flushed before invoking qcom_scm_call and invalidated in the cache - * immediately after qcom_scm_call returns. Cache maintenance on the command - * and response buffers is taken care of by qcom_scm_call; however, callers are - * responsible for any other cached buffers passed over to the secure world. - */ -static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, - size_t cmd_len, void *resp_buf, size_t resp_len) -{ - int ret; - struct qcom_scm_command *cmd; - struct qcom_scm_response *rsp; - unsigned long start, end; - - cmd = alloc_qcom_scm_command(cmd_len, resp_len); - if (!cmd) - return -ENOMEM; - - cmd->id = cpu_to_le32((svc_id << 10) | cmd_id); - if (cmd_buf) - memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len); - - mutex_lock(&qcom_scm_lock); - ret = __qcom_scm_call(cmd); - mutex_unlock(&qcom_scm_lock); - if (ret) - goto out; - - rsp = qcom_scm_command_to_response(cmd); - start = (unsigned long)rsp; - - do { - qcom_scm_inv_range(start, start + sizeof(*rsp)); - } while (!rsp->is_complete); - - end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len; - qcom_scm_inv_range(start, end); - - if (resp_buf) - memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len); -out: - free_qcom_scm_command(cmd); - return ret; -} - -#define SCM_CLASS_REGISTER (0x2 << 8) -#define SCM_MASK_IRQS BIT(5) -#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \ - SCM_CLASS_REGISTER | \ - SCM_MASK_IRQS | \ - (n & 0xf)) - -/** - * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument - * @svc_id: service identifier - * @cmd_id: command identifier - * @arg1: first argument - * - * This shall only be used with commands that are guaranteed to be - * uninterruptable, atomic and SMP safe. - */ -static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1) -{ - int context_id; - - register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1); - register u32 r1 asm("r1") = (u32)&context_id; - register u32 r2 asm("r2") = arg1; - - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r0") - __asmeq("%2", "r1") - __asmeq("%3", "r2") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0) - : "r" (r0), "r" (r1), "r" (r2) - : "r3"); - return r0; -} - -u32 qcom_scm_get_version(void) -{ - int context_id; - static u32 version = -1; - register u32 r0 asm("r0"); - register u32 r1 asm("r1"); - - if (version != -1) - return version; - - mutex_lock(&qcom_scm_lock); - - r0 = 0x1 << 8; - r1 = (u32)&context_id; - do { - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r1") - __asmeq("%2", "r0") - __asmeq("%3", "r1") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0), "=r" (r1) - : "r" (r0), "r" (r1) - : "r2", "r3"); - } while (r0 == QCOM_SCM_INTERRUPTED); - - version = r1; - mutex_unlock(&qcom_scm_lock); - - return version; -} -EXPORT_SYMBOL(qcom_scm_get_version); - -#define QCOM_SCM_SVC_BOOT 0x1 -#define QCOM_SCM_BOOT_ADDR 0x1 -/* - * Set the cold/warm boot address for one of the CPU cores. - */ -static int qcom_scm_set_boot_addr(u32 addr, int flags) -{ - struct { - __le32 flags; - __le32 addr; - } cmd; - - cmd.addr = cpu_to_le32(addr); - cmd.flags = cpu_to_le32(flags); - return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR, - &cmd, sizeof(cmd), NULL, 0); -} +#include "qcom_scm.h" /** * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus @@ -414,26 +33,7 @@ static int qcom_scm_set_boot_addr(u32 addr, int flags) */ int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) { - int flags = 0; - int cpu; - int scm_cb_flags[] = { - QCOM_SCM_FLAG_COLDBOOT_CPU0, - QCOM_SCM_FLAG_COLDBOOT_CPU1, - QCOM_SCM_FLAG_COLDBOOT_CPU2, - QCOM_SCM_FLAG_COLDBOOT_CPU3, - }; - - if (!cpus || (cpus && cpumask_empty(cpus))) - return -EINVAL; - - for_each_cpu(cpu, cpus) { - if (cpu < ARRAY_SIZE(scm_cb_flags)) - flags |= scm_cb_flags[cpu]; - else - set_cpu_present(cpu, false); - } - - return qcom_scm_set_boot_addr(virt_to_phys(entry), flags); + return __qcom_scm_set_cold_boot_addr(entry, cpus); } EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr); @@ -447,37 +47,10 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr); */ int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) { - int ret; - int flags = 0; - int cpu; - - /* - * Reassign only if we are switching from hotplug entry point - * to cpuidle entry point or vice versa. - */ - for_each_cpu(cpu, cpus) { - if (entry == qcom_scm_wb[cpu].entry) - continue; - flags |= qcom_scm_wb[cpu].flag; - } - - /* No change in entry function */ - if (!flags) - return 0; - - ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags); - if (!ret) { - for_each_cpu(cpu, cpus) - qcom_scm_wb[cpu].entry = entry; - } - - return ret; + return __qcom_scm_set_warm_boot_addr(entry, cpus); } EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr); -#define QCOM_SCM_CMD_TERMINATE_PC 0x2 -#define QCOM_SCM_FLUSH_FLAG_MASK 0x3 - /** * qcom_scm_cpu_power_down() - Power down the cpu * @flags - Flags to flush cache @@ -488,7 +61,36 @@ EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr); */ void qcom_scm_cpu_power_down(u32 flags) { - qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC, - flags & QCOM_SCM_FLUSH_FLAG_MASK); + __qcom_scm_cpu_power_down(flags); } EXPORT_SYMBOL(qcom_scm_cpu_power_down); + +/** + * qcom_scm_hdcp_available() - Check if secure environment supports HDCP. + * + * Return true if HDCP is supported, false if not. + */ +bool qcom_scm_hdcp_available(void) +{ + int ret; + + ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP, + QCOM_SCM_CMD_HDCP); + + return (ret > 0) ? true : false; +} +EXPORT_SYMBOL(qcom_scm_hdcp_available); + +/** + * qcom_scm_hdcp_req() - Send HDCP request. + * @req: HDCP request array + * @req_cnt: HDCP request array count + * @resp: response buffer passed to SCM + * + * Write HDCP register(s) through SCM. + */ +int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp) +{ + return __qcom_scm_hdcp_req(req, req_cnt, resp); +} +EXPORT_SYMBOL(qcom_scm_hdcp_req); diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h new file mode 100644 index 000000000000..2cce75c08b99 --- /dev/null +++ b/drivers/firmware/qcom_scm.h @@ -0,0 +1,47 @@ +/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __QCOM_SCM_INT_H +#define __QCOM_SCM_INT_H + +#define QCOM_SCM_SVC_BOOT 0x1 +#define QCOM_SCM_BOOT_ADDR 0x1 +#define QCOM_SCM_BOOT_ADDR_MC 0x11 + +#define QCOM_SCM_FLAG_HLOS 0x01 +#define QCOM_SCM_FLAG_COLDBOOT_MC 0x02 +#define QCOM_SCM_FLAG_WARMBOOT_MC 0x04 +extern int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus); +extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus); + +#define QCOM_SCM_CMD_TERMINATE_PC 0x2 +#define QCOM_SCM_FLUSH_FLAG_MASK 0x3 +#define QCOM_SCM_CMD_CORE_HOTPLUGGED 0x10 +extern void __qcom_scm_cpu_power_down(u32 flags); + +#define QCOM_SCM_SVC_INFO 0x6 +#define QCOM_IS_CALL_AVAIL_CMD 0x1 +extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id); + +#define QCOM_SCM_SVC_HDCP 0x11 +#define QCOM_SCM_CMD_HDCP 0x01 +extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, + u32 *resp); + +/* common error codes */ +#define QCOM_SCM_ENOMEM -5 +#define QCOM_SCM_EOPNOTSUPP -4 +#define QCOM_SCM_EINVAL_ADDR -3 +#define QCOM_SCM_EINVAL_ARG -2 +#define QCOM_SCM_ERROR -1 +#define QCOM_SCM_INTERRUPTED 1 + +#endif diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 460b2dba109c..5eea374c8fa6 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -10,3 +10,10 @@ config QCOM_GSBI functions for connecting the underlying serial UART, SPI, and I2C devices to the output pins. +config QCOM_PM + bool "Qualcomm Power Management" + depends on ARCH_QCOM && !ARM64 + help + QCOM Platform specific power driver to manage cores and L2 low power + modes. It interface with various system drivers to put the cores in + low power modes. diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 438901257ac1..931d385386c5 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o +obj-$(CONFIG_QCOM_PM) += spm.o diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c new file mode 100644 index 000000000000..b562af816c0a --- /dev/null +++ b/drivers/soc/qcom/spm.c @@ -0,0 +1,385 @@ +/* + * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved. + * Copyright (c) 2014,2015, Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/qcom_scm.h> + +#include <asm/cpuidle.h> +#include <asm/proc-fns.h> +#include <asm/suspend.h> + +#define MAX_PMIC_DATA 2 +#define MAX_SEQ_DATA 64 +#define SPM_CTL_INDEX 0x7f +#define SPM_CTL_INDEX_SHIFT 4 +#define SPM_CTL_EN BIT(0) + +enum pm_sleep_mode { + PM_SLEEP_MODE_STBY, + PM_SLEEP_MODE_RET, + PM_SLEEP_MODE_SPC, + PM_SLEEP_MODE_PC, + PM_SLEEP_MODE_NR, +}; + +enum spm_reg { + SPM_REG_CFG, + SPM_REG_SPM_CTL, + SPM_REG_DLY, + SPM_REG_PMIC_DLY, + SPM_REG_PMIC_DATA_0, + SPM_REG_PMIC_DATA_1, + SPM_REG_VCTL, + SPM_REG_SEQ_ENTRY, + SPM_REG_SPM_STS, + SPM_REG_PMIC_STS, + SPM_REG_NR, +}; + +struct spm_reg_data { + const u8 *reg_offset; + u32 spm_cfg; + u32 spm_dly; + u32 pmic_dly; + u32 pmic_data[MAX_PMIC_DATA]; + u8 seq[MAX_SEQ_DATA]; + u8 start_index[PM_SLEEP_MODE_NR]; +}; + +struct spm_driver_data { + void __iomem *reg_base; + const struct spm_reg_data *reg_data; +}; + +static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = { + [SPM_REG_CFG] = 0x08, + [SPM_REG_SPM_CTL] = 0x30, + [SPM_REG_DLY] = 0x34, + [SPM_REG_SEQ_ENTRY] = 0x80, +}; + +/* SPM register data for 8974, 8084 */ +static const struct spm_reg_data spm_reg_8974_8084_cpu = { + .reg_offset = spm_reg_offset_v2_1, + .spm_cfg = 0x1, + .spm_dly = 0x3C102800, + .seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03, + 0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30, + 0x0F }, + .start_index[PM_SLEEP_MODE_STBY] = 0, + .start_index[PM_SLEEP_MODE_SPC] = 3, +}; + +static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = { + [SPM_REG_CFG] = 0x08, + [SPM_REG_SPM_CTL] = 0x20, + [SPM_REG_PMIC_DLY] = 0x24, + [SPM_REG_PMIC_DATA_0] = 0x28, + [SPM_REG_PMIC_DATA_1] = 0x2C, + [SPM_REG_SEQ_ENTRY] = 0x80, +}; + +/* SPM register data for 8064 */ +static const struct spm_reg_data spm_reg_8064_cpu = { + .reg_offset = spm_reg_offset_v1_1, + .spm_cfg = 0x1F, + .pmic_dly = 0x02020004, + .pmic_data[0] = 0x0084009C, + .pmic_data[1] = 0x00A4001C, + .seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01, + 0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F }, + .start_index[PM_SLEEP_MODE_STBY] = 0, + .start_index[PM_SLEEP_MODE_SPC] = 2, +}; + +static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv); + +typedef int (*idle_fn)(int); +static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops); + +static inline void spm_register_write(struct spm_driver_data *drv, + enum spm_reg reg, u32 val) +{ + if (drv->reg_data->reg_offset[reg]) + writel_relaxed(val, drv->reg_base + + drv->reg_data->reg_offset[reg]); +} + +/* Ensure a guaranteed write, before return */ +static inline void spm_register_write_sync(struct spm_driver_data *drv, + enum spm_reg reg, u32 val) +{ + u32 ret; + + if (!drv->reg_data->reg_offset[reg]) + return; + + do { + writel_relaxed(val, drv->reg_base + + drv->reg_data->reg_offset[reg]); + ret = readl_relaxed(drv->reg_base + + drv->reg_data->reg_offset[reg]); + if (ret == val) + break; + cpu_relax(); + } while (1); +} + +static inline u32 spm_register_read(struct spm_driver_data *drv, + enum spm_reg reg) +{ + return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]); +} + +static void spm_set_low_power_mode(struct spm_driver_data *drv, + enum pm_sleep_mode mode) +{ + u32 start_index; + u32 ctl_val; + + start_index = drv->reg_data->start_index[mode]; + + ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL); + ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT); + ctl_val |= start_index << SPM_CTL_INDEX_SHIFT; + ctl_val |= SPM_CTL_EN; + spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val); +} + +static int qcom_pm_collapse(unsigned long int unused) +{ + qcom_scm_cpu_power_down(QCOM_SCM_CPU_PWR_DOWN_L2_ON); + + /* + * Returns here only if there was a pending interrupt and we did not + * power down as a result. + */ + return -1; +} + +static int qcom_cpu_spc(int cpu) +{ + int ret; + struct spm_driver_data *drv = per_cpu(cpu_spm_drv, cpu); + + spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC); + ret = cpu_suspend(0, qcom_pm_collapse); + /* + * ARM common code executes WFI without calling into our driver and + * if the SPM mode is not reset, then we may accidently power down the + * cpu when we intended only to gate the cpu clock. + * Ensure the state is set to standby before returning. + */ + spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY); + + return ret; +} + +static int qcom_idle_enter(int cpu, unsigned long index) +{ + return per_cpu(qcom_idle_ops, cpu)[index](cpu); +} + +static const struct of_device_id qcom_idle_state_match[] __initconst = { + { .compatible = "qcom,idle-state-spc", .data = qcom_cpu_spc }, + { }, +}; + +static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu) +{ + const struct of_device_id *match_id; + struct device_node *state_node; + int i; + int state_count = 1; + idle_fn idle_fns[CPUIDLE_STATE_MAX]; + idle_fn *fns; + cpumask_t mask; + bool use_scm_power_down = false; + + for (i = 0; ; i++) { + state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); + if (!state_node) + break; + + if (!of_device_is_available(state_node)) + continue; + + if (i == CPUIDLE_STATE_MAX) { + pr_warn("%s: cpuidle states reached max possible\n", + __func__); + break; + } + + match_id = of_match_node(qcom_idle_state_match, state_node); + if (!match_id) + return -ENODEV; + + idle_fns[state_count] = match_id->data; + + /* Check if any of the states allow power down */ + if (match_id->data == qcom_cpu_spc) + use_scm_power_down = true; + + state_count++; + } + + if (state_count == 1) + goto check_spm; + + fns = devm_kcalloc(get_cpu_device(cpu), state_count, sizeof(*fns), + GFP_KERNEL); + if (!fns) + return -ENOMEM; + + for (i = 1; i < state_count; i++) + fns[i] = idle_fns[i]; + + if (use_scm_power_down) { + /* We have atleast one power down mode */ + cpumask_clear(&mask); + cpumask_set_cpu(cpu, &mask); + qcom_scm_set_warm_boot_addr(cpu_resume, &mask); + } + + per_cpu(qcom_idle_ops, cpu) = fns; + + /* + * SPM probe for the cpu should have happened by now, if the + * SPM device does not exist, return -ENXIO to indicate that the + * cpu does not support idle states. + */ +check_spm: + return per_cpu(cpu_spm_drv, cpu) ? 0 : -ENXIO; +} + +static struct cpuidle_ops qcom_cpuidle_ops __initdata = { + .suspend = qcom_idle_enter, + .init = qcom_cpuidle_init, +}; + +CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v1, "qcom,kpss-acc-v1", &qcom_cpuidle_ops); +CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v2, "qcom,kpss-acc-v2", &qcom_cpuidle_ops); + +static struct spm_driver_data *spm_get_drv(struct platform_device *pdev, + int *spm_cpu) +{ + struct spm_driver_data *drv = NULL; + struct device_node *cpu_node, *saw_node; + int cpu; + bool found; + + for_each_possible_cpu(cpu) { + cpu_node = of_cpu_device_node_get(cpu); + if (!cpu_node) + continue; + saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0); + found = (saw_node == pdev->dev.of_node); + of_node_put(saw_node); + of_node_put(cpu_node); + if (found) + break; + } + + if (found) { + drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); + if (drv) + *spm_cpu = cpu; + } + + return drv; +} + +static const struct of_device_id spm_match_table[] = { + { .compatible = "qcom,msm8974-saw2-v2.1-cpu", + .data = &spm_reg_8974_8084_cpu }, + { .compatible = "qcom,apq8084-saw2-v2.1-cpu", + .data = &spm_reg_8974_8084_cpu }, + { .compatible = "qcom,apq8064-saw2-v1.1-cpu", + .data = &spm_reg_8064_cpu }, + { }, +}; + +static int spm_dev_probe(struct platform_device *pdev) +{ + struct spm_driver_data *drv; + struct resource *res; + const struct of_device_id *match_id; + void __iomem *addr; + int cpu; + + drv = spm_get_drv(pdev, &cpu); + if (!drv) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + drv->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(drv->reg_base)) + return PTR_ERR(drv->reg_base); + + match_id = of_match_node(spm_match_table, pdev->dev.of_node); + if (!match_id) + return -ENODEV; + + drv->reg_data = match_id->data; + + /* Write the SPM sequences first.. */ + addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY]; + __iowrite32_copy(addr, drv->reg_data->seq, + ARRAY_SIZE(drv->reg_data->seq) / 4); + + /* + * ..and then the control registers. + * On some SoC if the control registers are written first and if the + * CPU was held in reset, the reset signal could trigger the SPM state + * machine, before the sequences are completely written. + */ + spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg); + spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly); + spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly); + spm_register_write(drv, SPM_REG_PMIC_DATA_0, + drv->reg_data->pmic_data[0]); + spm_register_write(drv, SPM_REG_PMIC_DATA_1, + drv->reg_data->pmic_data[1]); + + /* Set up Standby as the default low power mode */ + spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY); + + per_cpu(cpu_spm_drv, cpu) = drv; + + return 0; +} + +static struct platform_driver spm_driver = { + .probe = spm_dev_probe, + .driver = { + .name = "saw", + .of_match_table = spm_match_table, + }, +}; +module_platform_driver(spm_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("SAW power controller driver"); +MODULE_ALIAS("platform:saw"); diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h index d7a974d5f57c..6e7d5ec65838 100644 --- a/include/linux/qcom_scm.h +++ b/include/linux/qcom_scm.h @@ -1,4 +1,4 @@ -/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. +/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved. * Copyright (C) 2015 Linaro Ltd. * * This program is free software; you can redistribute it and/or modify @@ -16,6 +16,17 @@ extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus); extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus); +#define QCOM_SCM_HDCP_MAX_REQ_CNT 5 + +struct qcom_scm_hdcp_req { + u32 addr; + u32 val; +}; + +extern bool qcom_scm_hdcp_available(void); +extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, + u32 *resp); + #define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0 #define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1 |