diff options
34 files changed, 499 insertions, 288 deletions
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 5cfade235bb4..6f58cad5bf74 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -34,9 +34,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "gpmc-smsc911x.h" -#include "gpmc.h" -#include <plat/sdrc.h> #include <plat/usb.h> #include "common.h" @@ -44,6 +41,8 @@ #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-smsc911x.h" #define OMAP3LOGIC_SMSC911X_CS 1 diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index 4ae439222085..35076592189e 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -27,13 +27,13 @@ #include <plat/clock.h> #include <plat/sram.h> -#include <plat/sdrc.h> #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" +#include "sdrc.h" /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 3524f0e7b6d5..0cf63e7c6102 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -35,7 +35,6 @@ #include <plat/clock.h> #include <plat/sram.h> -#include <plat/sdrc.h> #include "soc.h" #include "clock.h" @@ -43,6 +42,7 @@ #include "opp2xxx.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" +#include "sdrc.h" const struct prcm_config *curr_prcm_set; const struct prcm_config *rate_table; diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index 7c6da2f731dc..aff6ca4fd3a4 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -23,7 +23,6 @@ #include <plat/clock.h> #include <plat/sram.h> -#include <plat/sdrc.h> #include "clock.h" #include "clock3xxx.h" diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index d1ff8399a222..bf2be5c5468d 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -1,7 +1,7 @@ /* * OMAP2/3 System Control Module register access * - * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007, 2012 Texas Instruments, Inc. * Copyright (C) 2007 Nokia Corporation * * Written by Paul Walmsley @@ -15,8 +15,6 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <plat/sdrc.h> - #include "soc.h" #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 1011995f150a..28f508724a56 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -284,6 +284,35 @@ err: return ERR_PTR(r); } +static enum omapdss_version __init omap_display_get_version(void) +{ + if (cpu_is_omap24xx()) + return OMAPDSS_VER_OMAP24xx; + else if (cpu_is_omap3630()) + return OMAPDSS_VER_OMAP3630; + else if (cpu_is_omap34xx()) { + if (soc_is_am35xx()) { + return OMAPDSS_VER_AM35xx; + } else { + if (omap_rev() < OMAP3430_REV_ES3_0) + return OMAPDSS_VER_OMAP34xx_ES1; + else + return OMAPDSS_VER_OMAP34xx_ES3; + } + } else if (omap_rev() == OMAP4430_REV_ES1_0) + return OMAPDSS_VER_OMAP4430_ES1; + else if (omap_rev() == OMAP4430_REV_ES2_0 || + omap_rev() == OMAP4430_REV_ES2_1 || + omap_rev() == OMAP4430_REV_ES2_2) + return OMAPDSS_VER_OMAP4430_ES2; + else if (cpu_is_omap44xx()) + return OMAPDSS_VER_OMAP4; + else if (soc_is_omap54xx()) + return OMAPDSS_VER_OMAP5; + else + return OMAPDSS_VER_UNKNOWN; +} + int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; @@ -291,9 +320,18 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) int i, oh_count; const struct omap_dss_hwmod_data *curr_dss_hwmod; struct platform_device *dss_pdev; + enum omapdss_version ver; /* create omapdss device */ + ver = omap_display_get_version(); + + if (ver == OMAPDSS_VER_UNKNOWN) { + pr_err("DSS not supported on this SoC\n"); + return -ENODEV; + } + + board_data->version = ver; board_data->dsi_enable_pads = omap_dsi_enable_pads; board_data->dsi_disable_pads = omap_dsi_disable_pads; board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index f14bd3f55218..9472541a4d8d 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -31,7 +31,6 @@ #include <asm/mach-types.h> #include <plat/cpu.h> -#include <plat/sdrc.h> #include <plat/omap_device.h> #include "soc.h" diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 42a4b9c08aaa..f71e51bfbe2a 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include <plat/sram.h> -#include <plat/sdrc.h> #include <plat/serial.h> #include <plat/omap-pm.h> #include <plat/omap_hwmod.h> @@ -43,6 +42,7 @@ #include "clock2xxx.h" #include "clock3xxx.h" #include "clock44xx.h" +#include "sdrc.h" /* * The machine specific code may provide the extra mapping besides the diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 001eff290cdb..bbe15cb1b874 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -38,7 +38,6 @@ #include <plat/sram.h> #include "clockdomain.h" #include "powerdomain.h" -#include <plat/sdrc.h> #include <plat/prcm.h> #include <plat-omap/dma-omap.h> diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h index 8bfaf342a028..1ee58c281a31 100644 --- a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h +++ b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h @@ -11,7 +11,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM #define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM -#include <plat/sdrc.h> +#include "sdrc.h" /* Hynix H8MBX00U0MER-0EM */ static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h index a391b4939f74..85cccc004c06 100644 --- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h +++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF -#include <plat/sdrc.h> +#include "sdrc.h" /* Micron MT46H32M32LF-6 */ /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */ diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c index 845c4fd2b125..5e5702cd410d 100644 --- a/arch/arm/mach-omap2/sdram-nokia.c +++ b/arch/arm/mach-omap2/sdram-nokia.c @@ -19,9 +19,9 @@ #include "common.h" #include <plat/clock.h> -#include <plat/sdrc.h> #include "sdram-nokia.h" +#include "sdrc.h" /* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */ struct sdram_timings { diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h index cd4352917022..003f7bf4e2e3 100644 --- a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h +++ b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h @@ -11,7 +11,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM #define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM -#include <plat/sdrc.h> +#include "sdrc.h" /* Numonyx M65KXXXXAM */ static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h index 0e518a72831f..8dc3de5ebb5b 100644 --- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h +++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 -#include <plat/sdrc.h> +#include "sdrc.h" /* Qimonda HYB18M512160AF-6 */ static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index e3d345f46409..761a781a99c5 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -27,7 +27,6 @@ #include <plat/clock.h> #include <plat/sram.h> -#include <plat/sdrc.h> #include "sdrc.h" static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; @@ -160,19 +159,3 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, sdrc_write_reg(l, SDRC_POWER); omap2_sms_save_context(); } - -void omap2_sms_write_rot_control(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_CONTROL(ctx)); -} - -void omap2_sms_write_rot_size(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_SIZE(ctx)); -} - -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx)); -} - diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index b3f83799e6cf..69c4b329452e 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -2,12 +2,14 @@ #define __ARCH_ARM_MACH_OMAP2_SDRC_H /* - * OMAP2 SDRC register definitions + * OMAP2/3 SDRC/SMS macros and prototypes * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation + * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation * - * Written by Paul Walmsley + * Paul Walmsley + * Tony Lindgren + * Richard Woodruff * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,8 +17,6 @@ */ #undef DEBUG -#include <plat/sdrc.h> - #ifndef __ASSEMBLER__ #include <linux/io.h> @@ -50,6 +50,58 @@ static inline u32 sms_read_reg(u16 reg) { return __raw_readl(OMAP_SMS_REGADDR(reg)); } + + +/** + * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate + * @rate: SDRC clock rate (in Hz) + * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate + * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate + * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate + * @mr: Value to program to SDRC_MR for this rate + * + * This structure holds a pre-computed set of register values for the + * SDRC for a given SDRC clock rate and SDRAM chip. These are + * intended to be pre-computed and specified in an array in the board-*.c + * files. The structure is keyed off the 'rate' field. + */ +struct omap_sdrc_params { + unsigned long rate; + u32 actim_ctrla; + u32 actim_ctrlb; + u32 rfr_ctrl; + u32 mr; +}; + +#ifdef CONFIG_SOC_HAS_OMAP2_SDRC +void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); +#else +static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) {}; +#endif + +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1); +void omap2_sms_save_context(void); +void omap2_sms_restore_context(void); + +struct memory_timings { + u32 m_type; /* ddr = 1, sdr = 0 */ + u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ + u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ + u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ + u32 base_cs; /* base chip select to use for calculations */ +}; + +extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); +struct omap_sdrc_params *rx51_get_sdram_timings(void); + +u32 omap2xxx_sdrc_dll_is_unlocked(void); +u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); + + #else #define OMAP242X_SDRC_REGADDR(reg) \ OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) @@ -57,6 +109,7 @@ static inline u32 sms_read_reg(u16 reg) OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) #define OMAP34XX_SDRC_REGADDR(reg) \ OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) + #endif /* __ASSEMBLER__ */ /* Minimum frequency that the SDRC DLL can lock at */ @@ -74,4 +127,85 @@ static inline u32 sms_read_reg(u16 reg) */ #define SDRC_MPURATE_LOOPS 96 +/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ + +#define SDRC_SYSCONFIG 0x010 +#define SDRC_CS_CFG 0x040 +#define SDRC_SHARING 0x044 +#define SDRC_ERR_TYPE 0x04C +#define SDRC_DLLA_CTRL 0x060 +#define SDRC_DLLA_STATUS 0x064 +#define SDRC_DLLB_CTRL 0x068 +#define SDRC_DLLB_STATUS 0x06C +#define SDRC_POWER 0x070 +#define SDRC_MCFG_0 0x080 +#define SDRC_MR_0 0x084 +#define SDRC_EMR2_0 0x08c +#define SDRC_ACTIM_CTRL_A_0 0x09c +#define SDRC_ACTIM_CTRL_B_0 0x0a0 +#define SDRC_RFR_CTRL_0 0x0a4 +#define SDRC_MANUAL_0 0x0a8 +#define SDRC_MCFG_1 0x0B0 +#define SDRC_MR_1 0x0B4 +#define SDRC_EMR2_1 0x0BC +#define SDRC_ACTIM_CTRL_A_1 0x0C4 +#define SDRC_ACTIM_CTRL_B_1 0x0C8 +#define SDRC_RFR_CTRL_1 0x0D4 +#define SDRC_MANUAL_1 0x0D8 + +#define SDRC_POWER_AUTOCOUNT_SHIFT 8 +#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) +#define SDRC_POWER_CLKCTRL_SHIFT 4 +#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) +#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) + +/* + * These values represent the number of memory clock cycles between + * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 + * rows per device, and include a subtraction of a 50 cycle window in the + * event that the autorefresh command is delayed due to other SDRC activity. + * The '| 1' sets the ARE field to send one autorefresh when the autorefresh + * counter reaches 0. + * + * These represent optimal values for common parts, it won't work for all. + * As long as you scale down, most parameters are still work, they just + * become sub-optimal. The RFR value goes in the opposite direction. If you + * don't adjust it down as your clock period increases the refresh interval + * will not be met. Setting all parameters for complete worst case may work, + * but may cut memory performance by 2x. Due to errata the DLLs need to be + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists acorss production samples. + * + * Only the FULL speed values are given. Current code is such that rate + * changes must be made at DPLLoutx2. The actual value adjustment for low + * frequency operation will be handled by omap_set_performance() + * + * By having the boot loader boot up in the fastest L4 speed available likely + * will result in something which you can switch between. + */ +#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) +#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) +#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) +#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ +#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ + + +/* + * SMS register access + */ + +#define OMAP242X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) + +/* SMS register offsets - read/write with sms_{read,write}_reg() */ + +#define SMS_SYSCONFIG 0x010 +/* REVISIT: fill in other SMS registers here */ + + + #endif diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 73e55e485329..f7074ff1d084 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -26,7 +26,6 @@ #include <plat/clock.h> #include <plat/sram.h> -#include <plat/sdrc.h> #include "soc.h" #include "iomap.h" diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index bcbb9d5dc293..f868caeedfd6 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -33,6 +33,67 @@ #include <mach/hardware.h> #include <asm/mach/map.h> +#include <plat/cpu.h> + +#ifdef CONFIG_OMAP2_VRFB + +/* + * The first memory resource is the register region for VRFB, + * the rest are VRFB virtual memory areas for each VRFB context. + */ + +static const struct resource omap2_vrfb_resources[] = { + DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"), + DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"), + DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"), + DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"), + DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"), +}; + +static const struct resource omap3_vrfb_resources[] = { + DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"), + DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"), + DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"), + DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"), + DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"), + DEFINE_RES_MEM_NAMED(0xe0000000u, 0x4000000, "vrfb-area-4"), + DEFINE_RES_MEM_NAMED(0xe4000000u, 0x4000000, "vrfb-area-5"), + DEFINE_RES_MEM_NAMED(0xe8000000u, 0x4000000, "vrfb-area-6"), + DEFINE_RES_MEM_NAMED(0xec000000u, 0x4000000, "vrfb-area-7"), + DEFINE_RES_MEM_NAMED(0xf0000000u, 0x4000000, "vrfb-area-8"), + DEFINE_RES_MEM_NAMED(0xf4000000u, 0x4000000, "vrfb-area-9"), + DEFINE_RES_MEM_NAMED(0xf8000000u, 0x4000000, "vrfb-area-10"), + DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"), +}; + +static int __init omap_init_vrfb(void) +{ + struct platform_device *pdev; + const struct resource *res; + unsigned int num_res; + + if (cpu_is_omap24xx()) { + res = omap2_vrfb_resources; + num_res = ARRAY_SIZE(omap2_vrfb_resources); + } else if (cpu_is_omap34xx()) { + res = omap3_vrfb_resources; + num_res = ARRAY_SIZE(omap3_vrfb_resources); + } else { + return 0; + } + + pdev = platform_device_register_resndata(NULL, "omapvrfb", -1, + res, num_res, NULL, 0); + + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + else + return 0; +} + +arch_initcall(omap_init_vrfb); +#endif + #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) static bool omapfb_lcd_configured; diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h deleted file mode 100644 index 36d6a7666216..000000000000 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ /dev/null @@ -1,164 +0,0 @@ -#ifndef ____ASM_ARCH_SDRC_H -#define ____ASM_ARCH_SDRC_H - -/* - * OMAP2/3 SDRC/SMS register definitions - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Tony Lindgren - * Paul Walmsley - * Richard Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ - -#define SDRC_SYSCONFIG 0x010 -#define SDRC_CS_CFG 0x040 -#define SDRC_SHARING 0x044 -#define SDRC_ERR_TYPE 0x04C -#define SDRC_DLLA_CTRL 0x060 -#define SDRC_DLLA_STATUS 0x064 -#define SDRC_DLLB_CTRL 0x068 -#define SDRC_DLLB_STATUS 0x06C -#define SDRC_POWER 0x070 -#define SDRC_MCFG_0 0x080 -#define SDRC_MR_0 0x084 -#define SDRC_EMR2_0 0x08c -#define SDRC_ACTIM_CTRL_A_0 0x09c -#define SDRC_ACTIM_CTRL_B_0 0x0a0 -#define SDRC_RFR_CTRL_0 0x0a4 -#define SDRC_MANUAL_0 0x0a8 -#define SDRC_MCFG_1 0x0B0 -#define SDRC_MR_1 0x0B4 -#define SDRC_EMR2_1 0x0BC -#define SDRC_ACTIM_CTRL_A_1 0x0C4 -#define SDRC_ACTIM_CTRL_B_1 0x0C8 -#define SDRC_RFR_CTRL_1 0x0D4 -#define SDRC_MANUAL_1 0x0D8 - -#define SDRC_POWER_AUTOCOUNT_SHIFT 8 -#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) -#define SDRC_POWER_CLKCTRL_SHIFT 4 -#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) -#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) - -/* - * These values represent the number of memory clock cycles between - * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 - * rows per device, and include a subtraction of a 50 cycle window in the - * event that the autorefresh command is delayed due to other SDRC activity. - * The '| 1' sets the ARE field to send one autorefresh when the autorefresh - * counter reaches 0. - * - * These represent optimal values for common parts, it won't work for all. - * As long as you scale down, most parameters are still work, they just - * become sub-optimal. The RFR value goes in the opposite direction. If you - * don't adjust it down as your clock period increases the refresh interval - * will not be met. Setting all parameters for complete worst case may work, - * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. - * - * Only the FULL speed values are given. Current code is such that rate - * changes must be made at DPLLoutx2. The actual value adjustment for low - * frequency operation will be handled by omap_set_performance() - * - * By having the boot loader boot up in the fastest L4 speed available likely - * will result in something which you can switch between. - */ -#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) -#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) -#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) -#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ -#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ - - -/* - * SMS register access - */ - -#define OMAP242X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) - -/* SMS register offsets - read/write with sms_{read,write}_reg() */ - -#define SMS_SYSCONFIG 0x010 -#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) -#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) -#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) -/* REVISIT: fill in other SMS registers here */ - - -#ifndef __ASSEMBLER__ - -/** - * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate - * @rate: SDRC clock rate (in Hz) - * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate - * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate - * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate - * @mr: Value to program to SDRC_MR for this rate - * - * This structure holds a pre-computed set of register values for the - * SDRC for a given SDRC clock rate and SDRAM chip. These are - * intended to be pre-computed and specified in an array in the board-*.c - * files. The structure is keyed off the 'rate' field. - */ -struct omap_sdrc_params { - unsigned long rate; - u32 actim_ctrla; - u32 actim_ctrlb; - u32 rfr_ctrl; - u32 mr; -}; - -#ifdef CONFIG_SOC_HAS_OMAP2_SDRC -void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1); -#else -static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1) {}; -#endif - -int omap2_sdrc_get_params(unsigned long r, - struct omap_sdrc_params **sdrc_cs0, - struct omap_sdrc_params **sdrc_cs1); -void omap2_sms_save_context(void); -void omap2_sms_restore_context(void); - -void omap2_sms_write_rot_control(u32 val, unsigned ctx); -void omap2_sms_write_rot_size(u32 val, unsigned ctx); -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); - -#ifdef CONFIG_ARCH_OMAP2 - -struct memory_timings { - u32 m_type; /* ddr = 1, sdr = 0 */ - u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ - u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ - u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ - u32 base_cs; /* base chip select to use for calculations */ -}; - -extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); -struct omap_sdrc_params *rx51_get_sdram_timings(void); - -u32 omap2xxx_sdrc_dll_is_unlocked(void); -u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); - -#endif /* CONFIG_ARCH_OMAP2 */ - -#endif /* __ASSEMBLER__ */ - -#endif diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c index 1bd6a2ec95a3..4b1becc86e54 100644 --- a/drivers/media/platform/omap/omap_vout.c +++ b/drivers/media/platform/omap/omap_vout.c @@ -46,7 +46,7 @@ #include <plat/cpu.h> #include <plat-omap/dma-omap.h> -#include <plat/vrfb.h> +#include <video/omapvrfb.h> #include <video/omapdss.h> #include "omap_voutlib.h" diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c index bed4cbb18ef5..8340445a0ee5 100644 --- a/drivers/media/platform/omap/omap_vout_vrfb.c +++ b/drivers/media/platform/omap/omap_vout_vrfb.c @@ -17,7 +17,7 @@ #include <media/v4l2-device.h> #include <plat-omap/dma-omap.h> -#include <plat/vrfb.h> +#include <video/omapvrfb.h> #include "omap_voutdef.h" #include "omap_voutlib.h" diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h index 27a95d23b913..9ccfe1f475a4 100644 --- a/drivers/media/platform/omap/omap_voutdef.h +++ b/drivers/media/platform/omap/omap_voutdef.h @@ -12,7 +12,7 @@ #define OMAP_VOUTDEF_H #include <video/omapdss.h> -#include <plat/vrfb.h> +#include <video/omapvrfb.h> #define YUYV_BPP 2 #define RGB565_BPP 2 diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index b2af72dc20bd..d94ef9e31a35 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -237,7 +237,7 @@ static int __init omap_dss_probe(struct platform_device *pdev) core.pdev = pdev; - dss_features_init(); + dss_features_init(pdata->version); dss_apply_init(); diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index b43477a5fae8..a5ab354f267a 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -37,8 +37,6 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> -#include <plat/cpu.h> - #include <video/omapdss.h> #include "dss.h" @@ -4042,29 +4040,44 @@ static const struct dispc_features omap44xx_dispc_feats __initconst = { .gfx_fifo_workaround = true, }; -static int __init dispc_init_features(struct device *dev) +static int __init dispc_init_features(struct platform_device *pdev) { + struct omap_dss_board_info *pdata = pdev->dev.platform_data; const struct dispc_features *src; struct dispc_features *dst; - dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL); + dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL); if (!dst) { - dev_err(dev, "Failed to allocate DISPC Features\n"); + dev_err(&pdev->dev, "Failed to allocate DISPC Features\n"); return -ENOMEM; } - if (cpu_is_omap24xx()) { + switch (pdata->version) { + case OMAPDSS_VER_OMAP24xx: src = &omap24xx_dispc_feats; - } else if (cpu_is_omap34xx()) { - if (omap_rev() < OMAP3430_REV_ES3_0) - src = &omap34xx_rev1_0_dispc_feats; - else - src = &omap34xx_rev3_0_dispc_feats; - } else if (cpu_is_omap44xx()) { + break; + + case OMAPDSS_VER_OMAP34xx_ES1: + src = &omap34xx_rev1_0_dispc_feats; + break; + + case OMAPDSS_VER_OMAP34xx_ES3: + case OMAPDSS_VER_OMAP3630: + case OMAPDSS_VER_AM35xx: + src = &omap34xx_rev3_0_dispc_feats; + break; + + case OMAPDSS_VER_OMAP4430_ES1: + case OMAPDSS_VER_OMAP4430_ES2: + case OMAPDSS_VER_OMAP4: src = &omap44xx_dispc_feats; - } else if (soc_is_omap54xx()) { + break; + + case OMAPDSS_VER_OMAP5: src = &omap44xx_dispc_feats; - } else { + break; + + default: return -ENODEV; } @@ -4084,7 +4097,7 @@ static int __init omap_dispchw_probe(struct platform_device *pdev) dispc.pdev = pdev; - r = dispc_init_features(&dispc.pdev->dev); + r = dispc_init_features(dispc.pdev); if (r) return r; diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index 2ab1c3e96553..363852a0f764 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -35,8 +35,6 @@ #include <video/omapdss.h> -#include <plat/cpu.h> - #include "dss.h" #include "dss_features.h" @@ -792,29 +790,46 @@ static const struct dss_features omap54xx_dss_feats __initconst = { .dpi_select_source = &dss_dpi_select_source_omap5, }; -static int __init dss_init_features(struct device *dev) +static int __init dss_init_features(struct platform_device *pdev) { + struct omap_dss_board_info *pdata = pdev->dev.platform_data; const struct dss_features *src; struct dss_features *dst; - dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL); + dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL); if (!dst) { - dev_err(dev, "Failed to allocate local DSS Features\n"); + dev_err(&pdev->dev, "Failed to allocate local DSS Features\n"); return -ENOMEM; } - if (cpu_is_omap24xx()) + switch (pdata->version) { + case OMAPDSS_VER_OMAP24xx: src = &omap24xx_dss_feats; - else if (cpu_is_omap34xx()) + break; + + case OMAPDSS_VER_OMAP34xx_ES1: + case OMAPDSS_VER_OMAP34xx_ES3: + case OMAPDSS_VER_AM35xx: src = &omap34xx_dss_feats; - else if (cpu_is_omap3630()) + break; + + case OMAPDSS_VER_OMAP3630: src = &omap3630_dss_feats; - else if (cpu_is_omap44xx()) + break; + + case OMAPDSS_VER_OMAP4430_ES1: + case OMAPDSS_VER_OMAP4430_ES2: + case OMAPDSS_VER_OMAP4: src = &omap44xx_dss_feats; - else if (soc_is_omap54xx()) + break; + + case OMAPDSS_VER_OMAP5: src = &omap54xx_dss_feats; - else + break; + + default: return -ENODEV; + } memcpy(dst, src, sizeof(*dst)); dss.feat = dst; @@ -831,7 +846,7 @@ static int __init omap_dsshw_probe(struct platform_device *pdev) dss.pdev = pdev; - r = dss_init_features(&dss.pdev->dev); + r = dss_init_features(dss.pdev); if (r) return r; diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c index acbc1e1efba3..3e8287c8709d 100644 --- a/drivers/video/omap2/dss/dss_features.c +++ b/drivers/video/omap2/dss/dss_features.c @@ -23,7 +23,6 @@ #include <linux/slab.h> #include <video/omapdss.h> -#include <plat/cpu.h> #include "dss.h" #include "dss_features.h" @@ -825,10 +824,20 @@ static const struct ti_hdmi_ip_ops omap4_hdmi_functions = { }; -void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data) +void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data, + enum omapdss_version version) { - if (cpu_is_omap44xx()) + switch (version) { + case OMAPDSS_VER_OMAP4430_ES1: + case OMAPDSS_VER_OMAP4430_ES2: + case OMAPDSS_VER_OMAP4: ip_data->ops = &omap4_hdmi_functions; + break; + default: + ip_data->ops = NULL; + } + + WARN_ON(ip_data->ops == NULL); } #endif @@ -929,29 +938,44 @@ bool dss_feat_rotation_type_supported(enum omap_dss_rotation_type rot_type) return omap_current_dss_features->supported_rotation_types & rot_type; } -void dss_features_init(void) +void dss_features_init(enum omapdss_version version) { - if (cpu_is_omap24xx()) + switch (version) { + case OMAPDSS_VER_OMAP24xx: omap_current_dss_features = &omap2_dss_features; - else if (cpu_is_omap3630()) + break; + + case OMAPDSS_VER_OMAP34xx_ES1: + case OMAPDSS_VER_OMAP34xx_ES3: + omap_current_dss_features = &omap3430_dss_features; + break; + + case OMAPDSS_VER_OMAP3630: omap_current_dss_features = &omap3630_dss_features; - else if (cpu_is_omap34xx()) { - if (soc_is_am35xx()) { - omap_current_dss_features = &am35xx_dss_features; - } else { - omap_current_dss_features = &omap3430_dss_features; - } - } - else if (omap_rev() == OMAP4430_REV_ES1_0) + break; + + case OMAPDSS_VER_OMAP4430_ES1: omap_current_dss_features = &omap4430_es1_0_dss_features; - else if (omap_rev() == OMAP4430_REV_ES2_0 || - omap_rev() == OMAP4430_REV_ES2_1 || - omap_rev() == OMAP4430_REV_ES2_2) + break; + + case OMAPDSS_VER_OMAP4430_ES2: omap_current_dss_features = &omap4430_es2_0_1_2_dss_features; - else if (cpu_is_omap44xx()) + break; + + case OMAPDSS_VER_OMAP4: omap_current_dss_features = &omap4_dss_features; - else if (soc_is_omap54xx()) + break; + + case OMAPDSS_VER_OMAP5: omap_current_dss_features = &omap5_dss_features; - else + break; + + case OMAPDSS_VER_AM35xx: + omap_current_dss_features = &am35xx_dss_features; + break; + + default: DSSWARN("Unsupported OMAP version"); + break; + } } diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h index 9218113b5e88..fc492ef72a51 100644 --- a/drivers/video/omap2/dss/dss_features.h +++ b/drivers/video/omap2/dss/dss_features.h @@ -123,8 +123,9 @@ bool dss_feat_rotation_type_supported(enum omap_dss_rotation_type rot_type); bool dss_has_feature(enum dss_feat_id id); void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end); -void dss_features_init(void); +void dss_features_init(enum omapdss_version version); #if defined(CONFIG_OMAP4_DSS_HDMI) -void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data); +void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data, + enum omapdss_version version); #endif #endif diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index a48a7dd75b33..adcc906d12f8 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -323,6 +323,7 @@ static void hdmi_runtime_put(void) static int __init hdmi_init_display(struct omap_dss_device *dssdev) { + struct omap_dss_board_info *pdata = hdmi.pdev->dev.platform_data; int r; struct gpio gpios[] = { @@ -333,7 +334,7 @@ static int __init hdmi_init_display(struct omap_dss_device *dssdev) DSSDBG("init_display\n"); - dss_init_hdmi_ip_ops(&hdmi.ip_data); + dss_init_hdmi_ip_ops(&hdmi.ip_data, pdata->version); if (hdmi.vdda_hdmi_dac_reg == NULL) { struct regulator *reg; diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c index 606b89f12351..55a39be694a5 100644 --- a/drivers/video/omap2/omapfb/omapfb-ioctl.c +++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c @@ -30,7 +30,7 @@ #include <linux/export.h> #include <video/omapdss.h> -#include <plat/vrfb.h> +#include <video/omapvrfb.h> #include <plat/vram.h> #include "omapfb.h" diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index 16db1589bd91..bc225e46fdd2 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -31,9 +31,8 @@ #include <linux/omapfb.h> #include <video/omapdss.h> -#include <plat/cpu.h> #include <plat/vram.h> -#include <plat/vrfb.h> +#include <video/omapvrfb.h> #include "omapfb.h" @@ -2396,10 +2395,7 @@ static int __init omapfb_probe(struct platform_device *pdev) goto err0; } - /* TODO : Replace cpu check with omap_has_vrfb once HAS_FEATURE - * available for OMAP2 and OMAP3 - */ - if (def_vrfb && !cpu_is_omap24xx() && !cpu_is_omap34xx()) { + if (def_vrfb && !omap_vrfb_supported()) { def_vrfb = 0; dev_warn(&pdev->dev, "VRFB is not supported on this hardware, " "ignoring the module parameter vrfb=y\n"); diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c index e8d8cc76a435..17aa174e187c 100644 --- a/drivers/video/omap2/omapfb/omapfb-sysfs.c +++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c @@ -30,7 +30,7 @@ #include <linux/omapfb.h> #include <video/omapdss.h> -#include <plat/vrfb.h> +#include <video/omapvrfb.h> #include "omapfb.h" diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c index 7e990220ad2a..5d8fdac3b800 100644 --- a/drivers/video/omap2/vrfb.c +++ b/drivers/video/omap2/vrfb.c @@ -26,9 +26,9 @@ #include <linux/io.h> #include <linux/bitops.h> #include <linux/mutex.h> +#include <linux/platform_device.h> -#include <plat/vrfb.h> -#include <plat/sdrc.h> +#include <video/omapvrfb.h> #ifdef DEBUG #define DBG(format, ...) pr_debug("VRFB: " format, ## __VA_ARGS__) @@ -36,10 +36,10 @@ #define DBG(format, ...) #endif -#define SMS_ROT_VIRT_BASE(context, rot) \ - (((context >= 4) ? 0xD0000000 : 0x70000000) \ - + (0x4000000 * (context)) \ - + (0x1000000 * (rot))) +#define SMS_ROT_CONTROL(context) (0x0 + 0x10 * context) +#define SMS_ROT_SIZE(context) (0x4 + 0x10 * context) +#define SMS_ROT_PHYSICAL_BA(context) (0x8 + 0x10 * context) +#define SMS_ROT_VIRT_BASE(rot) (0x1000000 * (rot)) #define OMAP_VRFB_SIZE (2048 * 2048 * 4) @@ -53,10 +53,16 @@ #define SMS_PW_OFFSET 4 #define SMS_PS_OFFSET 0 -#define VRFB_NUM_CTXS 12 /* bitmap of reserved contexts */ static unsigned long ctx_map; +struct vrfb_ctx { + u32 base; + u32 physical_ba; + u32 control; + u32 size; +}; + static DEFINE_MUTEX(ctx_lock); /* @@ -65,17 +71,34 @@ static DEFINE_MUTEX(ctx_lock); * we don't need locking, since no drivers will run until after the wake-up * has finished. */ -static struct { - u32 physical_ba; - u32 control; - u32 size; -} vrfb_hw_context[VRFB_NUM_CTXS]; + +static void __iomem *vrfb_base; + +static int num_ctxs; +static struct vrfb_ctx *ctxs; + +static bool vrfb_loaded; + +static void omap2_sms_write_rot_control(u32 val, unsigned ctx) +{ + __raw_writel(val, vrfb_base + SMS_ROT_CONTROL(ctx)); +} + +static void omap2_sms_write_rot_size(u32 val, unsigned ctx) +{ + __raw_writel(val, vrfb_base + SMS_ROT_SIZE(ctx)); +} + +static void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx) +{ + __raw_writel(val, vrfb_base + SMS_ROT_PHYSICAL_BA(ctx)); +} static inline void restore_hw_context(int ctx) { - omap2_sms_write_rot_control(vrfb_hw_context[ctx].control, ctx); - omap2_sms_write_rot_size(vrfb_hw_context[ctx].size, ctx); - omap2_sms_write_rot_physical_ba(vrfb_hw_context[ctx].physical_ba, ctx); + omap2_sms_write_rot_control(ctxs[ctx].control, ctx); + omap2_sms_write_rot_size(ctxs[ctx].size, ctx); + omap2_sms_write_rot_physical_ba(ctxs[ctx].physical_ba, ctx); } static u32 get_image_width_roundup(u16 width, u8 bytespp) @@ -196,9 +219,9 @@ void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, control |= VRFB_PAGE_WIDTH_EXP << SMS_PW_OFFSET; control |= VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET; - vrfb_hw_context[ctx].physical_ba = paddr; - vrfb_hw_context[ctx].size = size; - vrfb_hw_context[ctx].control = control; + ctxs[ctx].physical_ba = paddr; + ctxs[ctx].size = size; + ctxs[ctx].control = control; omap2_sms_write_rot_physical_ba(paddr, ctx); omap2_sms_write_rot_size(size, ctx); @@ -274,11 +297,11 @@ int omap_vrfb_request_ctx(struct vrfb *vrfb) mutex_lock(&ctx_lock); - for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx) + for (ctx = 0; ctx < num_ctxs; ++ctx) if ((ctx_map & (1 << ctx)) == 0) break; - if (ctx == VRFB_NUM_CTXS) { + if (ctx == num_ctxs) { pr_err("vrfb: no free contexts\n"); r = -EBUSY; goto out; @@ -293,7 +316,7 @@ int omap_vrfb_request_ctx(struct vrfb *vrfb) vrfb->context = ctx; for (rot = 0; rot < 4; ++rot) { - paddr = SMS_ROT_VIRT_BASE(ctx, rot); + paddr = ctxs[ctx].base + SMS_ROT_VIRT_BASE(rot); if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) { pr_err("vrfb: failed to reserve VRFB " "area for ctx %d, rotation %d\n", @@ -314,3 +337,80 @@ out: return r; } EXPORT_SYMBOL(omap_vrfb_request_ctx); + +bool omap_vrfb_supported(void) +{ + return vrfb_loaded; +} +EXPORT_SYMBOL(omap_vrfb_supported); + +static int __init vrfb_probe(struct platform_device *pdev) +{ + struct resource *mem; + int i; + + /* first resource is the register res, the rest are vrfb contexts */ + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "can't get vrfb base address\n"); + return -EINVAL; + } + + vrfb_base = devm_request_and_ioremap(&pdev->dev, mem); + if (!vrfb_base) { + dev_err(&pdev->dev, "can't ioremap vrfb memory\n"); + return -ENOMEM; + } + + num_ctxs = pdev->num_resources - 1; + + ctxs = devm_kzalloc(&pdev->dev, + sizeof(struct vrfb_ctx) * num_ctxs, + GFP_KERNEL); + + if (!ctxs) + return -ENOMEM; + + for (i = 0; i < num_ctxs; ++i) { + mem = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i); + if (!mem) { + dev_err(&pdev->dev, "can't get vrfb ctx %d address\n", + i); + return -EINVAL; + } + + ctxs[i].base = mem->start; + } + + vrfb_loaded = true; + + return 0; +} + +static void __exit vrfb_remove(struct platform_device *pdev) +{ + vrfb_loaded = false; +} + +static struct platform_driver vrfb_driver = { + .driver.name = "omapvrfb", + .remove = __exit_p(vrfb_remove), +}; + +static int __init vrfb_init(void) +{ + return platform_driver_probe(&vrfb_driver, &vrfb_probe); +} + +static void __exit vrfb_exit(void) +{ + platform_driver_unregister(&vrfb_driver); +} + +module_init(vrfb_init); +module_exit(vrfb_exit); + +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>"); +MODULE_DESCRIPTION("OMAP VRFB"); +MODULE_LICENSE("GPL v2"); diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 3729173b7fbc..88c829466fc1 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -314,6 +314,19 @@ int dsi_vc_send_bta_sync(struct omap_dss_device *dssdev, int channel); int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel); void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel); +enum omapdss_version { + OMAPDSS_VER_UNKNOWN = 0, + OMAPDSS_VER_OMAP24xx, + OMAPDSS_VER_OMAP34xx_ES1, /* OMAP3430 ES1.0, 2.0 */ + OMAPDSS_VER_OMAP34xx_ES3, /* OMAP3430 ES3.0+ */ + OMAPDSS_VER_OMAP3630, + OMAPDSS_VER_AM35xx, + OMAPDSS_VER_OMAP4430_ES1, /* OMAP4430 ES1.0 */ + OMAPDSS_VER_OMAP4430_ES2, /* OMAP4430 ES2.0, 2.1, 2.2 */ + OMAPDSS_VER_OMAP4, /* All other OMAP4s */ + OMAPDSS_VER_OMAP5, +}; + /* Board specific data */ struct omap_dss_board_info { int (*get_context_loss_count)(struct device *dev); @@ -323,6 +336,7 @@ struct omap_dss_board_info { int (*dsi_enable_pads)(int dsi_id, unsigned lane_mask); void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask); int (*set_min_bus_tput)(struct device *dev, unsigned long r); + enum omapdss_version version; }; /* Init with the board info */ diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/include/video/omapvrfb.h index 3792bdea2f6d..bb0bd89f8bc6 100644 --- a/arch/arm/plat-omap/include/plat/vrfb.h +++ b/include/video/omapvrfb.h @@ -36,6 +36,7 @@ struct vrfb { }; #ifdef CONFIG_OMAP2_VRFB +extern bool omap_vrfb_supported(void); extern int omap_vrfb_request_ctx(struct vrfb *vrfb); extern void omap_vrfb_release_ctx(struct vrfb *vrfb); extern void omap_vrfb_adjust_size(u16 *width, u16 *height, @@ -49,6 +50,7 @@ extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot); extern void omap_vrfb_restore_context(void); #else +static inline bool omap_vrfb_supported(void) { return false; } static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; } static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {} static inline void omap_vrfb_adjust_size(u16 *width, u16 *height, |