diff options
| -rw-r--r-- | Documentation/devicetree/bindings/arm/marvell,berlin.txt | 37 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt | 43 |
2 files changed, 43 insertions, 37 deletions
diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt index 6b7c21079bea..e8d9111a9852 100644 --- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -107,23 +107,6 @@ Clocks provided by core clocks shall be referenced by a clock specifier indexing one of the provided clocks. Refer to dt-bindings/clock/berlin<soc>.h for the corresponding index mapping. -* Pin controller binding - -Pin control registers are part of both register sets, chip control and system -control. The pins controlled are organized in groups, so no actual pin -information is needed. - -A pin-controller node should contain subnodes representing the pin group -configurations, one per function. Each subnode has the group name and the muxing -function used. - -Be aware the Marvell Berlin datasheets use the keyword 'mode' for what is called -a 'function' in the pin-controller subsystem. - -Required subnode-properties: -- groups: a list of strings describing the group names. -- function: a string describing the function used to mux the groups. - Example: chip: chip-control@ea0000 { @@ -132,29 +115,9 @@ chip: chip-control@ea0000 { reg = <0xea0000 0x400>; clocks = <&refclk>, <&externaldev 0>; clock-names = "refclk", "video_ext0"; - - spi1_pmux: spi1-pmux { - groups = "G0"; - function = "spi1"; - }; }; sysctrl: system-controller@d000 { compatible = "marvell,berlin2-system-ctrl", "simple-mfd", "syscon"; reg = <0xd000 0x100>; - - uart0_pmux: uart0-pmux { - groups = "GSM4"; - function = "uart0"; - }; - - uart1_pmux: uart1-pmux { - groups = "GSM5"; - function = "uart1"; - }; - - uart2_pmux: uart2-pmux { - groups = "GSM3"; - function = "uart2"; - }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt new file mode 100644 index 000000000000..a8bb5e26019c --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt @@ -0,0 +1,43 @@ +* Pin-controller driver for the Marvell Berlin SoCs + +Pin control registers are part of both chip controller and system +controller register sets. Pin controller nodes should be a sub-node of +either the chip controller or system controller node. The pins +controlled are organized in groups, so no actual pin information is +needed. + +A pin-controller node should contain subnodes representing the pin group +configurations, one per function. Each subnode has the group name and +the muxing function used. + +Be aware the Marvell Berlin datasheets use the keyword 'mode' for what +is called a 'function' in the pin-controller subsystem. + +Required properties: +- compatible: should be one of: + "marvell,berlin2-soc-pinctrl", + "marvell,berlin2-system-pinctrl", + "marvell,berlin2cd-soc-pinctrl", + "marvell,berlin2cd-system-pinctrl", + "marvell,berlin2q-soc-pinctrl", + "marvell,berlin2q-system-pinctrl" + +Required subnode-properties: +- groups: a list of strings describing the group names. +- function: a string describing the function used to mux the groups. + +Example: + +sys_pinctrl: pin-controller { + compatible = "marvell,berlin2q-system-pinctrl"; + + uart0_pmux: uart0-pmux { + groups = "GSM12"; + function = "uart0"; + }; +}; + +&uart0 { + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; +}; |