diff options
| -rw-r--r-- | include/linux/ntb.h | 137 |
1 files changed, 69 insertions, 68 deletions
diff --git a/include/linux/ntb.h b/include/linux/ntb.h index de87ceac110e..d7ab3e1ec88f 100644 --- a/include/linux/ntb.h +++ b/include/linux/ntb.h @@ -179,13 +179,13 @@ static inline int ntb_ctx_ops_is_valid(const struct ntb_ctx_ops *ops) /** * struct ntb_ctx_ops - ntb device operations + * @link_is_up: See ntb_link_is_up(). + * @link_enable: See ntb_link_enable(). + * @link_disable: See ntb_link_disable(). * @mw_count: See ntb_mw_count(). * @mw_get_range: See ntb_mw_get_range(). * @mw_set_trans: See ntb_mw_set_trans(). * @mw_clear_trans: See ntb_mw_clear_trans(). - * @link_is_up: See ntb_link_is_up(). - * @link_enable: See ntb_link_enable(). - * @link_disable: See ntb_link_disable(). * @db_is_unsafe: See ntb_db_is_unsafe(). * @db_valid_mask: See ntb_db_valid_mask(). * @db_vector_count: See ntb_db_vector_count(). @@ -212,6 +212,12 @@ static inline int ntb_ctx_ops_is_valid(const struct ntb_ctx_ops *ops) * @peer_spad_write: See ntb_peer_spad_write(). */ struct ntb_dev_ops { + int (*link_is_up)(struct ntb_dev *ntb, + enum ntb_speed *speed, enum ntb_width *width); + int (*link_enable)(struct ntb_dev *ntb, + enum ntb_speed max_speed, enum ntb_width max_width); + int (*link_disable)(struct ntb_dev *ntb); + int (*mw_count)(struct ntb_dev *ntb); int (*mw_get_range)(struct ntb_dev *ntb, int idx, phys_addr_t *base, resource_size_t *size, @@ -220,12 +226,6 @@ struct ntb_dev_ops { dma_addr_t addr, resource_size_t size); int (*mw_clear_trans)(struct ntb_dev *ntb, int idx); - int (*link_is_up)(struct ntb_dev *ntb, - enum ntb_speed *speed, enum ntb_width *width); - int (*link_enable)(struct ntb_dev *ntb, - enum ntb_speed max_speed, enum ntb_width max_width); - int (*link_disable)(struct ntb_dev *ntb); - int (*db_is_unsafe)(struct ntb_dev *ntb); u64 (*db_valid_mask)(struct ntb_dev *ntb); int (*db_vector_count)(struct ntb_dev *ntb); @@ -265,13 +265,14 @@ static inline int ntb_dev_ops_is_valid(const struct ntb_dev_ops *ops) { /* commented callbacks are not required: */ return + ops->link_is_up && + ops->link_enable && + ops->link_disable && ops->mw_count && ops->mw_get_range && ops->mw_set_trans && /* ops->mw_clear_trans && */ - ops->link_is_up && - ops->link_enable && - ops->link_disable && + /* ops->db_is_unsafe && */ ops->db_valid_mask && @@ -441,6 +442,62 @@ void ntb_link_event(struct ntb_dev *ntb); void ntb_db_event(struct ntb_dev *ntb, int vector); /** + * ntb_link_is_up() - get the current ntb link state + * @ntb: NTB device context. + * @speed: OUT - The link speed expressed as PCIe generation number. + * @width: OUT - The link width expressed as the number of PCIe lanes. + * + * Get the current state of the ntb link. It is recommended to query the link + * state once after every link event. It is safe to query the link state in + * the context of the link event callback. + * + * Return: One if the link is up, zero if the link is down, otherwise a + * negative value indicating the error number. + */ +static inline int ntb_link_is_up(struct ntb_dev *ntb, + enum ntb_speed *speed, enum ntb_width *width) +{ + return ntb->ops->link_is_up(ntb, speed, width); +} + +/** + * ntb_link_enable() - enable the link on the secondary side of the ntb + * @ntb: NTB device context. + * @max_speed: The maximum link speed expressed as PCIe generation number. + * @max_width: The maximum link width expressed as the number of PCIe lanes. + * + * Enable the link on the secondary side of the ntb. This can only be done + * from the primary side of the ntb in primary or b2b topology. The ntb device + * should train the link to its maximum speed and width, or the requested speed + * and width, whichever is smaller, if supported. + * + * Return: Zero on success, otherwise an error number. + */ +static inline int ntb_link_enable(struct ntb_dev *ntb, + enum ntb_speed max_speed, + enum ntb_width max_width) +{ + return ntb->ops->link_enable(ntb, max_speed, max_width); +} + +/** + * ntb_link_disable() - disable the link on the secondary side of the ntb + * @ntb: NTB device context. + * + * Disable the link on the secondary side of the ntb. This can only be + * done from the primary side of the ntb in primary or b2b topology. The ntb + * device should disable the link. Returning from this call must indicate that + * a barrier has passed, though with no more writes may pass in either + * direction across the link, except if this call returns an error number. + * + * Return: Zero on success, otherwise an error number. + */ +static inline int ntb_link_disable(struct ntb_dev *ntb) +{ + return ntb->ops->link_disable(ntb); +} + +/** * ntb_mw_count() - get the number of memory windows * @ntb: NTB device context. * @@ -517,62 +574,6 @@ static inline int ntb_mw_clear_trans(struct ntb_dev *ntb, int idx) } /** - * ntb_link_is_up() - get the current ntb link state - * @ntb: NTB device context. - * @speed: OUT - The link speed expressed as PCIe generation number. - * @width: OUT - The link width expressed as the number of PCIe lanes. - * - * Get the current state of the ntb link. It is recommended to query the link - * state once after every link event. It is safe to query the link state in - * the context of the link event callback. - * - * Return: One if the link is up, zero if the link is down, otherwise a - * negative value indicating the error number. - */ -static inline int ntb_link_is_up(struct ntb_dev *ntb, - enum ntb_speed *speed, enum ntb_width *width) -{ - return ntb->ops->link_is_up(ntb, speed, width); -} - -/** - * ntb_link_enable() - enable the link on the secondary side of the ntb - * @ntb: NTB device context. - * @max_speed: The maximum link speed expressed as PCIe generation number. - * @max_width: The maximum link width expressed as the number of PCIe lanes. - * - * Enable the link on the secondary side of the ntb. This can only be done - * from the primary side of the ntb in primary or b2b topology. The ntb device - * should train the link to its maximum speed and width, or the requested speed - * and width, whichever is smaller, if supported. - * - * Return: Zero on success, otherwise an error number. - */ -static inline int ntb_link_enable(struct ntb_dev *ntb, - enum ntb_speed max_speed, - enum ntb_width max_width) -{ - return ntb->ops->link_enable(ntb, max_speed, max_width); -} - -/** - * ntb_link_disable() - disable the link on the secondary side of the ntb - * @ntb: NTB device context. - * - * Disable the link on the secondary side of the ntb. This can only be - * done from the primary side of the ntb in primary or b2b topology. The ntb - * device should disable the link. Returning from this call must indicate that - * a barrier has passed, though with no more writes may pass in either - * direction across the link, except if this call returns an error number. - * - * Return: Zero on success, otherwise an error number. - */ -static inline int ntb_link_disable(struct ntb_dev *ntb) -{ - return ntb->ops->link_disable(ntb); -} - -/** * ntb_db_is_unsafe() - check if it is safe to use hardware doorbell * @ntb: NTB device context. * |