diff options
44 files changed, 2667 insertions, 2152 deletions
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index fa948b4e029b..f9a991bb87d4 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -15,6 +15,15 @@ be setup by initializing the following fields. - struct drm_mode_config_funcs \*funcs; Mode setting functions. +Modeset Base Object Abstraction +=============================== + +.. kernel-doc:: include/drm/drm_mode_object.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_mode_object.c + :export: + KMS Data Structures =================== @@ -125,6 +134,21 @@ Connector Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_connector.c :export: +Encoder Abstraction +=================== + +.. kernel-doc:: drivers/gpu/drm/drm_encoder.c + :doc: overview + +Encoder Functions Reference +--------------------------- + +.. kernel-doc:: include/drm/drm_encoder.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_encoder.c + :export: + KMS Initialization and Cleanup ============================== @@ -198,46 +222,6 @@ future); drivers that do not wish to provide special handling for primary planes may make use of the helper functions described in ? to create and register a primary plane with standard capabilities. -Encoders (:c:type:`struct drm_encoder <drm_encoder>`) ------------------------------------------------------ - -An encoder takes pixel data from a CRTC and converts it to a format -suitable for any attached connectors. On some devices, it may be -possible to have a CRTC send data to more than one encoder. In that -case, both encoders would receive data from the same scanout buffer, -resulting in a "cloned" display configuration across the connectors -attached to each encoder. - -Encoder Initialization -~~~~~~~~~~~~~~~~~~~~~~ - -As for CRTCs, a KMS driver must create, initialize and register at least -one :c:type:`struct drm_encoder <drm_encoder>` instance. The -instance is allocated and zeroed by the driver, possibly as part of a -larger structure. - -Drivers must initialize the :c:type:`struct drm_encoder -<drm_encoder>` possible_crtcs and possible_clones fields before -registering the encoder. Both fields are bitmasks of respectively the -CRTCs that the encoder can be connected to, and sibling encoders -candidate for cloning. - -After being initialized, the encoder must be registered with a call to -:c:func:`drm_encoder_init()`. The function takes a pointer to the -encoder functions and an encoder type. Supported types are - -- DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A -- DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort -- DRM_MODE_ENCODER_LVDS for display panels -- DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video, - Component, SCART) -- DRM_MODE_ENCODER_VIRTUAL for virtual machine displays - -Encoders must be attached to a CRTC to be used. DRM drivers leave -encoders unattached at initialization time. Applications (or the fbdev -compatibility layer when implemented) are responsible for attaching the -encoders they want to use to a CRTC. - Cleanup ------- @@ -320,90 +304,17 @@ KMS Locking KMS Properties ============== -Drivers may need to expose additional parameters to applications than -those described in the previous sections. KMS supports attaching -properties to CRTCs, connectors and planes and offers a userspace API to -list, get and set the property values. - -Properties are identified by a name that uniquely defines the property -purpose, and store an associated value. For all property types except -blob properties the value is a 64-bit unsigned integer. - -KMS differentiates between properties and property instances. Drivers -first create properties and then create and associate individual -instances of those properties to objects. A property can be instantiated -multiple times and associated with different objects. Values are stored -in property instances, and all other property information are stored in -the property and shared between all instances of the property. - -Every property is created with a type that influences how the KMS core -handles the property. Supported property types are - -DRM_MODE_PROP_RANGE - Range properties report their minimum and maximum admissible values. - The KMS core verifies that values set by application fit in that - range. - -DRM_MODE_PROP_ENUM - Enumerated properties take a numerical value that ranges from 0 to - the number of enumerated values defined by the property minus one, - and associate a free-formed string name to each value. Applications - can retrieve the list of defined value-name pairs and use the - numerical value to get and set property instance values. - -DRM_MODE_PROP_BITMASK - Bitmask properties are enumeration properties that additionally - restrict all enumerated values to the 0..63 range. Bitmask property - instance values combine one or more of the enumerated bits defined - by the property. - -DRM_MODE_PROP_BLOB - Blob properties store a binary blob without any format restriction. - The binary blobs are created as KMS standalone objects, and blob - property instance values store the ID of their associated blob - object. - - Blob properties are only used for the connector EDID property and - cannot be created by drivers. - -To create a property drivers call one of the following functions -depending on the property type. All property creation functions take -property flags and name, as well as type-specific arguments. - -- struct drm_property \*drm_property_create_range(struct - drm_device \*dev, int flags, const char \*name, uint64_t min, - uint64_t max); - Create a range property with the given minimum and maximum values. - -- struct drm_property \*drm_property_create_enum(struct drm_device - \*dev, int flags, const char \*name, const struct - drm_prop_enum_list \*props, int num_values); - Create an enumerated property. The ``props`` argument points to an - array of ``num_values`` value-name pairs. - -- struct drm_property \*drm_property_create_bitmask(struct - drm_device \*dev, int flags, const char \*name, const struct - drm_prop_enum_list \*props, int num_values); - Create a bitmask property. The ``props`` argument points to an array - of ``num_values`` value-name pairs. - -Properties can additionally be created as immutable, in which case they -will be read-only for applications but can be modified by the driver. To -create an immutable property drivers must set the -DRM_MODE_PROP_IMMUTABLE flag at property creation time. - -When no array of value-name pairs is readily available at property -creation time for enumerated or range properties, drivers can create the -property using the :c:func:`drm_property_create()` function and -manually add enumeration value-name pairs by calling the -:c:func:`drm_property_add_enum()` function. Care must be taken to -properly specify the property type through the ``flags`` argument. - -After creating properties drivers can attach property instances to CRTC, -connector and plane objects by calling the -:c:func:`drm_object_attach_property()`. The function takes a -pointer to the target object, a pointer to the previously created -property and an initial instance value. +Property Types and Blob Property Support +---------------------------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_property.c + :doc: overview + +.. kernel-doc:: include/drm/drm_property.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_property.c + :export: Blending and Z-Position properties ---------------------------------- diff --git a/Documentation/gpu/vga-switcheroo.rst b/Documentation/gpu/vga-switcheroo.rst index 463a74fc40d1..cbbdb994f1dd 100644 --- a/Documentation/gpu/vga-switcheroo.rst +++ b/Documentation/gpu/vga-switcheroo.rst @@ -1,3 +1,5 @@ +.. _vga_switcheroo: + ============== VGA Switcheroo ============== diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index cbb64d9a82f8..536b5d477c3b 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -108,24 +108,8 @@ config DRM_KMS_CMA_HELPER source "drivers/gpu/drm/i2c/Kconfig" -config DRM_TDFX - tristate "3dfx Banshee/Voodoo3+" - depends on DRM && PCI - help - Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), - graphics card. If M is selected, the module will be called tdfx. - source "drivers/gpu/drm/arm/Kconfig" -config DRM_R128 - tristate "ATI Rage 128" - depends on DRM && PCI - select FW_LOADER - help - Choose this option if you have an ATI Rage 128 graphics card. If M - is selected, the module will be called r128. AGP support for - this card is strongly suggested (unless you have a PCI version). - config DRM_RADEON tristate "ATI Radeon" depends on DRM && PCI @@ -166,49 +150,8 @@ source "drivers/gpu/drm/amd/amdgpu/Kconfig" source "drivers/gpu/drm/nouveau/Kconfig" -config DRM_I810 - tristate "Intel I810" - # !PREEMPT because of missing ioctl locking - depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN) - help - Choose this option if you have an Intel I810 graphics card. If M is - selected, the module will be called i810. AGP support is required - for this driver to work. - source "drivers/gpu/drm/i915/Kconfig" -config DRM_MGA - tristate "Matrox g200/g400" - depends on DRM && PCI - select FW_LOADER - help - Choose this option if you have a Matrox G200, G400 or G450 graphics - card. If M is selected, the module will be called mga. AGP - support is required for this driver to work. - -config DRM_SIS - tristate "SiS video cards" - depends on DRM && AGP - depends on FB_SIS || FB_SIS=n - help - Choose this option if you have a SiS 630 or compatible video - chipset. If M is selected the module will be called sis. AGP - support is required for this driver to work. - -config DRM_VIA - tristate "Via unichrome video cards" - depends on DRM && PCI - help - Choose this option if you have a Via unichrome or compatible video - chipset. If M is selected the module will be called via. - -config DRM_SAVAGE - tristate "Savage video cards" - depends on DRM && PCI - help - Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister - chipset. If M is selected the module will be called savage. - config DRM_VGEM tristate "Virtual GEM provider" depends on DRM @@ -279,3 +222,82 @@ source "drivers/gpu/drm/arc/Kconfig" source "drivers/gpu/drm/hisilicon/Kconfig" source "drivers/gpu/drm/mediatek/Kconfig" + +# Keep legacy drivers last + +menuconfig DRM_LEGACY + bool "Enable legacy drivers (DANGEROUS)" + depends on DRM + depends on BROKEN + help + Enable legacy DRI1 drivers. Those drivers expose unsafe and dangerous + APIs to user-space, which can be used to circumvent access + restrictions and other security measures. For backwards compatibility + those drivers are still available, but their use is highly + inadvisable and might harm your system. + + You are recommended to use the safe modeset-only drivers instead, and + perform 3D emulation in user-space. + + Unless you have strong reasons to go rogue, say "N". + +if DRM_LEGACY + +config DRM_TDFX + tristate "3dfx Banshee/Voodoo3+" + depends on DRM && PCI + help + Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), + graphics card. If M is selected, the module will be called tdfx. + +config DRM_R128 + tristate "ATI Rage 128" + depends on DRM && PCI + select FW_LOADER + help + Choose this option if you have an ATI Rage 128 graphics card. If M + is selected, the module will be called r128. AGP support for + this card is strongly suggested (unless you have a PCI version). + +config DRM_I810 + tristate "Intel I810" + # !PREEMPT because of missing ioctl locking + depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN) + help + Choose this option if you have an Intel I810 graphics card. If M is + selected, the module will be called i810. AGP support is required + for this driver to work. + +config DRM_MGA + tristate "Matrox g200/g400" + depends on DRM && PCI + select FW_LOADER + help + Choose this option if you have a Matrox G200, G400 or G450 graphics + card. If M is selected, the module will be called mga. AGP + support is required for this driver to work. + +config DRM_SIS + tristate "SiS video cards" + depends on DRM && AGP + depends on FB_SIS || FB_SIS=n + help + Choose this option if you have a SiS 630 or compatible video + chipset. If M is selected the module will be called sis. AGP + support is required for this driver to work. + +config DRM_VIA + tristate "Via unichrome video cards" + depends on DRM && PCI + help + Choose this option if you have a Via unichrome or compatible video + chipset. If M is selected the module will be called via. + +config DRM_SAVAGE + tristate "Savage video cards" + depends on DRM && PCI + help + Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister + chipset. If M is selected the module will be called savage. + +endif # DRM_LEGACY diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 4054c94a2301..439d89b25ae0 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -13,7 +13,8 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \ drm_trace_points.o drm_global.o drm_prime.o \ drm_rect.o drm_vma_manager.o drm_flip_work.o \ drm_modeset_lock.o drm_atomic.o drm_bridge.o \ - drm_framebuffer.o drm_connector.o drm_blend.o + drm_framebuffer.o drm_connector.o drm_blend.o \ + drm_encoder.o drm_mode_object.o drm_property.o drm-$(CONFIG_COMPAT) += drm_ioc32.o drm-$(CONFIG_DRM_GEM_CMA_HELPER) += drm_gem_cma_helper.o diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c index 82171d223f2d..c383d724527f 100644 --- a/drivers/gpu/drm/arm/malidp_drv.c +++ b/drivers/gpu/drm/arm/malidp_drv.c @@ -91,7 +91,8 @@ static void malidp_atomic_commit_tail(struct drm_atomic_state *state) drm_atomic_helper_commit_modeset_disables(drm, state); drm_atomic_helper_commit_modeset_enables(drm, state); - drm_atomic_helper_commit_planes(drm, state, true); + drm_atomic_helper_commit_planes(drm, state, + DRM_PLANE_COMMIT_ACTIVE_ONLY); malidp_atomic_commit_hw_done(state); diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c index d4a3d61b7b06..8e7483d90c47 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c @@ -457,7 +457,7 @@ atmel_hlcdc_dc_atomic_complete(struct atmel_hlcdc_dc_commit *commit) /* Apply the atomic update. */ drm_atomic_helper_commit_modeset_disables(dev, old_state); - drm_atomic_helper_commit_planes(dev, old_state, false); + drm_atomic_helper_commit_planes(dev, old_state, 0); drm_atomic_helper_commit_modeset_enables(dev, old_state); drm_atomic_helper_wait_for_vblanks(dev, old_state); diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c index 77ab47341658..cdf39aa3943c 100644 --- a/drivers/gpu/drm/bridge/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/dw-hdmi.c @@ -940,10 +940,11 @@ static void hdmi_config_AVI(struct dw_hdmi *hdmi, struct drm_display_mode *mode) */ /* - * AVI data byte 1 differences: Colorspace in bits 4,5 rather than 5,6, - * active aspect present in bit 6 rather than 4. + * AVI data byte 1 differences: Colorspace in bits 0,1 rather than 5,6, + * scan info in bits 4,5 rather than 0,1 and active aspect present in + * bit 6 rather than 4. */ - val = (frame.colorspace & 3) << 4 | (frame.scan_mode & 0x3); + val = (frame.scan_mode & 3) << 4 | (frame.colorspace & 3); if (frame.active_aspect & 15) val |= HDMI_FC_AVICONF0_ACTIVE_FMT_INFO_PRESENT; if (frame.top_bar || frame.bottom_bar) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 9abe0a242f96..6fdd7ba47896 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -749,6 +749,8 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state) /* Right function depends upon target state. */ if (crtc->state->enable && funcs->prepare) funcs->prepare(crtc); + else if (funcs->atomic_disable) + funcs->atomic_disable(crtc, old_crtc_state); else if (funcs->disable) funcs->disable(crtc); else @@ -1146,7 +1148,8 @@ EXPORT_SYMBOL(drm_atomic_helper_wait_for_vblanks); * * drm_atomic_helper_commit_modeset_enables(dev, state); * - * drm_atomic_helper_commit_planes(dev, state, true); + * drm_atomic_helper_commit_planes(dev, state, + * DRM_PLANE_COMMIT_ACTIVE_ONLY); * * for committing the atomic update to hardware. See the kerneldoc entries for * these three functions for more details. @@ -1157,7 +1160,7 @@ void drm_atomic_helper_commit_tail(struct drm_atomic_state *state) drm_atomic_helper_commit_modeset_disables(dev, state); - drm_atomic_helper_commit_planes(dev, state, false); + drm_atomic_helper_commit_planes(dev, state, 0); drm_atomic_helper_commit_modeset_enables(dev, state); @@ -1676,7 +1679,7 @@ bool plane_crtc_active(struct drm_plane_state *state) * drm_atomic_helper_commit_planes - commit plane state * @dev: DRM device * @old_state: atomic state object with old state structures - * @active_only: Only commit on active CRTC if set + * @flags: flags for committing plane state * * This function commits the new plane state using the plane and atomic helper * functions for planes and crtcs. It assumes that the atomic state has already @@ -1696,25 +1699,34 @@ bool plane_crtc_active(struct drm_plane_state *state) * most drivers don't need to be immediately notified of plane updates for a * disabled CRTC. * - * Unless otherwise needed, drivers are advised to set the @active_only - * parameters to true in order not to receive plane update notifications related - * to a disabled CRTC. This avoids the need to manually ignore plane updates in + * Unless otherwise needed, drivers are advised to set the ACTIVE_ONLY flag in + * @flags in order not to receive plane update notifications related to a + * disabled CRTC. This avoids the need to manually ignore plane updates in * driver code when the driver and/or hardware can't or just don't need to deal * with updates on disabled CRTCs, for example when supporting runtime PM. * - * The drm_atomic_helper_commit() default implementation only sets @active_only - * to false to most closely match the behaviour of the legacy helpers. This should - * not be copied blindly by drivers. + * Drivers may set the NO_DISABLE_AFTER_MODESET flag in @flags if the relevant + * display controllers require to disable a CRTC's planes when the CRTC is + * disabled. This function would skip the ->atomic_disable call for a plane if + * the CRTC of the old plane state needs a modesetting operation. Of course, + * the drivers need to disable the planes in their CRTC disable callbacks + * since no one else would do that. + * + * The drm_atomic_helper_commit() default implementation doesn't set the + * ACTIVE_ONLY flag to most closely match the behaviour of the legacy helpers. + * This should not be copied blindly by drivers. */ void drm_atomic_helper_commit_planes(struct drm_device *dev, struct drm_atomic_state *old_state, - bool active_only) + uint32_t flags) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state; struct drm_plane *plane; struct drm_plane_state *old_plane_state; int i; + bool active_only = flags & DRM_PLANE_COMMIT_ACTIVE_ONLY; + bool no_disable = flags & DRM_PLANE_COMMIT_NO_DISABLE_AFTER_MODESET; for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) { const struct drm_crtc_helper_funcs *funcs; @@ -1758,10 +1770,19 @@ void drm_atomic_helper_commit_planes(struct drm_device *dev, /* * Special-case disabling the plane if drivers support it. */ - if (disabling && funcs->atomic_disable) + if (disabling && funcs->atomic_disable) { + struct drm_crtc_state *crtc_state; + + crtc_state = old_plane_state->crtc->state; + + if (drm_atomic_crtc_needs_modeset(crtc_state) && + no_disable) + continue; + funcs->atomic_disable(plane, old_plane_state); - else if (plane->state->crtc || disabling) + } else if (plane->state->crtc || disabling) { funcs->atomic_update(plane, old_plane_state); + } } for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) { @@ -1840,12 +1861,12 @@ EXPORT_SYMBOL(drm_atomic_helper_commit_planes_on_crtc); /** * drm_atomic_helper_disable_planes_on_crtc - helper to disable CRTC's planes - * @crtc: CRTC + * @old_crtc_state: atomic state object with the old CRTC state * @atomic: if set, synchronize with CRTC's atomic_begin/flush hooks * * Disables all planes associated with the given CRTC. This can be - * used for instance in the CRTC helper disable callback to disable - * all planes before shutting down the display pipeline. + * used for instance in the CRTC helper atomic_disable callback to disable + * all planes. * * If the atomic-parameter is set the function calls the CRTC's * atomic_begin hook before and atomic_flush hook after disabling the @@ -1854,9 +1875,11 @@ EXPORT_SYMBOL(drm_atomic_helper_commit_planes_on_crtc); * It is a bug to call this function without having implemented the * ->atomic_disable() plane hook. */ -void drm_atomic_helper_disable_planes_on_crtc(struct drm_crtc *crtc, - bool atomic) +void +drm_atomic_helper_disable_planes_on_crtc(struct drm_crtc_state *old_crtc_state, + bool atomic) { + struct drm_crtc *crtc = old_crtc_state->crtc; const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; struct drm_plane *plane; @@ -1864,11 +1887,11 @@ void drm_atomic_helper_disable_planes_on_crtc(struct drm_crtc *crtc, if (atomic && crtc_funcs && crtc_funcs->atomic_begin) crtc_funcs->atomic_begin(crtc, NULL); - drm_for_each_plane(plane, crtc->dev) { + drm_atomic_crtc_state_for_each_plane(plane, old_crtc_state) { const struct drm_plane_helper_funcs *plane_funcs = plane->helper_private; - if (plane->state->crtc != crtc || !plane_funcs) + if (!plane_funcs) continue; WARN_ON(!plane_funcs->atomic_disable); diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c index 255543086590..484046664d6c 100644 --- a/drivers/gpu/drm/drm_bridge.c +++ b/drivers/gpu/drm/drm_bridge.c @@ -98,11 +98,11 @@ EXPORT_SYMBOL(drm_bridge_remove); * @dev: DRM device * @bridge: bridge control structure * - * called by a kms driver to link one of our encoder/bridge to the given + * Called by a kms driver to link one of our encoder/bridge to the given * bridge. * * Note that setting up links between the bridge and our encoder/bridge - * objects needs to be handled by the kms driver itself + * objects needs to be handled by the kms driver itself. * * RETURNS: * Zero on success, error code on failure @@ -125,6 +125,31 @@ int drm_bridge_attach(struct drm_device *dev, struct drm_bridge *bridge) EXPORT_SYMBOL(drm_bridge_attach); /** + * drm_bridge_detach - deassociate given bridge from its DRM device + * + * @bridge: bridge control structure + * + * Called by a kms driver to unlink the given bridge from its DRM device. + * + * Note that tearing down links between the bridge and our encoder/bridge + * objects needs to be handled by the kms driver itself. + */ +void drm_bridge_detach(struct drm_bridge *bridge) +{ + if (WARN_ON(!bridge)) + return; + + if (WARN_ON(!bridge->dev)) + return; + + if (bridge->funcs->detach) + bridge->funcs->detach(bridge); + + bridge->dev = NULL; +} +EXPORT_SYMBOL(drm_bridge_detach); + +/** * DOC: bridge callbacks * * The &drm_bridge_funcs ops are populated by the bridge driver. The DRM diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 7b21281c4b78..a33dab27bb0d 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -54,177 +54,9 @@ static const struct drm_prop_enum_list drm_plane_type_enum_list[] = { { DRM_PLANE_TYPE_CURSOR, "Cursor" }, }; -static const struct drm_prop_enum_list drm_encoder_enum_list[] = { - { DRM_MODE_ENCODER_NONE, "None" }, - { DRM_MODE_ENCODER_DAC, "DAC" }, - { DRM_MODE_ENCODER_TMDS, "TMDS" }, - { DRM_MODE_ENCODER_LVDS, "LVDS" }, - { DRM_MODE_ENCODER_TVDAC, "TV" }, - { DRM_MODE_ENCODER_VIRTUAL, "Virtual" }, - { DRM_MODE_ENCODER_DSI, "DSI" }, - { DRM_MODE_ENCODER_DPMST, "DP MST" }, - { DRM_MODE_ENCODER_DPI, "DPI" }, -}; - /* * Optional properties */ -/* - * Internal function to assign a slot in the object idr and optionally - * register the object into the idr. - */ -int drm_mode_object_get_reg(struct drm_device *dev, - struct drm_mode_object *obj, - uint32_t obj_type, - bool register_obj, - void (*obj_free_cb)(struct kref *kref)) -{ - int ret; - - mutex_lock(&dev->mode_config.idr_mutex); - ret = idr_alloc(&dev->mode_config.crtc_idr, register_obj ? obj : NULL, 1, 0, GFP_KERNEL); - if (ret >= 0) { - /* - * Set up the object linking under the protection of the idr - * lock so that other users can't see inconsistent state. - */ - obj->id = ret; - obj->type = obj_type; - if (obj_free_cb) { - obj->free_cb = obj_free_cb; - kref_init(&obj->refcount); - } - } - mutex_unlock(&dev->mode_config.idr_mutex); - - return ret < 0 ? ret : 0; -} - -/** - * drm_mode_object_get - allocate a new modeset identifier - * @dev: DRM device - * @obj: object pointer, used to generate unique ID - * @obj_type: object type - * - * Create a unique identifier based on @ptr in @dev's identifier space. Used - * for tracking modes, CRTCs and connectors. Note that despite the _get postfix - * modeset identifiers are _not_ reference counted. Hence don't use this for - * reference counted modeset objects like framebuffers. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_mode_object_get(struct drm_device *dev, - struct drm_mode_object *obj, uint32_t obj_type) -{ - return drm_mode_object_get_reg(dev, obj, obj_type, true, NULL); -} - -void drm_mode_object_register(struct drm_device *dev, - struct drm_mode_object *obj) -{ - mutex_lock(&dev->mode_config.idr_mutex); - idr_replace(&dev->mode_config.crtc_idr, obj, obj->id); - mutex_unlock(&dev->mode_config.idr_mutex); -} - -/** - * drm_mode_object_unregister - free a modeset identifer - * @dev: DRM device - * @object: object to free - * - * Free @id from @dev's unique identifier pool. - * This function can be called multiple times, and guards against - * multiple removals. - * These modeset identifiers are _not_ reference counted. Hence don't use this - * for reference counted modeset objects like framebuffers. - */ -void drm_mode_object_unregister(struct drm_device *dev, - struct drm_mode_object *object) -{ - mutex_lock(&dev->mode_config.idr_mutex); - if (object->id) { - idr_remove(&dev->mode_config.crtc_idr, object->id); - object->id = 0; - } - mutex_unlock(&dev->mode_config.idr_mutex); -} - -struct drm_mode_object *__drm_mode_object_find(struct drm_device *dev, - uint32_t id, uint32_t type) -{ - struct drm_mode_object *obj = NULL; - - mutex_lock(&dev->mode_config.idr_mutex); - obj = idr_find(&dev->mode_config.crtc_idr, id); - if (obj && type != DRM_MODE_OBJECT_ANY && obj->type != type) - obj = NULL; - if (obj && obj->id != id) - obj = NULL; - - if (obj && obj->free_cb) { - if (!kref_get_unless_zero(&obj->refcount)) - obj = NULL; - } - mutex_unlock(&dev->mode_config.idr_mutex); - - return obj; -} - -/** - * drm_mode_object_find - look up a drm object with static lifetime - * @dev: drm device - * @id: id of the mode object - * @type: type of the mode object - * - * This function is used to look up a modeset object. It will acquire a - * reference for reference counted objects. This reference must be dropped again - * by callind drm_mode_object_unreference(). - */ -struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, - uint32_t id, uint32_t type) -{ - struct drm_mode_object *obj = NULL; - - obj = __drm_mode_object_find(dev, id, type); - return obj; -} -EXPORT_SYMBOL(drm_mode_object_find); - -/** - * drm_mode_object_unreference - decr the object refcnt - * @obj: mode_object - * - * This functions decrements the object's refcount if it is a refcounted modeset - * object. It is a no-op on any other object. This is used to drop references - * acquired with drm_mode_object_reference(). - */ -void drm_mode_object_unreference(struct drm_mode_object *obj) -{ - if (obj->free_cb) { - DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, atomic_read(&obj->refcount.refcount)); - kref_put(&obj->refcount, obj->free_cb); - } -} -EXPORT_SYMBOL(drm_mode_object_unreference); - -/** - * drm_mode_object_reference - incr the object refcnt - * @obj: mode_object - * - * This functions increments the object's refcount if it is a refcounted modeset - * object. It is a no-op on any other object. References should be dropped again - * by calling drm_mode_object_unreference(). - */ -void drm_mode_object_reference(struct drm_mode_object *obj) -{ - if (obj->free_cb) { - DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, atomic_read(&obj->refcount.refcount)); - kref_get(&obj->refcount); - } -} -EXPORT_SYMBOL(drm_mode_object_reference); - /** * drm_crtc_force_disable - Forcibly turn off a CRTC * @crtc: CRTC to turn off @@ -419,117 +251,6 @@ void drm_crtc_cleanup(struct drm_crtc *crtc) } EXPORT_SYMBOL(drm_crtc_cleanup); -static int drm_encoder_register_all(struct drm_device *dev) -{ - struct drm_encoder *encoder; - int ret = 0; - - drm_for_each_encoder(encoder, dev) { - if (encoder->funcs->late_register) - ret = encoder->funcs->late_register(encoder); - if (ret) - return ret; - } - - return 0; -} - -static void drm_encoder_unregister_all(struct drm_device *dev) -{ - struct drm_encoder *encoder; - - drm_for_each_encoder(encoder, dev) { - if (encoder->funcs->early_unregister) - encoder->funcs->early_unregister(encoder); - } -} - -/** - * drm_encoder_init - Init a preallocated encoder - * @dev: drm device - * @encoder: the encoder to init - * @funcs: callbacks for this encoder - * @encoder_type: user visible type of the encoder - * @name: printf style format string for the encoder name, or NULL for default name - * - * Initialises a preallocated encoder. Encoder should be - * subclassed as part of driver encoder objects. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_encoder_init(struct drm_device *dev, - struct drm_encoder *encoder, - const struct drm_encoder_funcs *funcs, - int encoder_type, const char *name, ...) -{ - int ret; - - drm_modeset_lock_all(dev); - - ret = drm_mode_object_get(dev, &encoder->base, DRM_MODE_OBJECT_ENCODER); - if (ret) - goto out_unlock; - - encoder->dev = dev; - encoder->encoder_type = encoder_type; - encoder->funcs = funcs; - if (name) { - va_list ap; - - va_start(ap, name); - encoder->name = kvasprintf(GFP_KERNEL, name, ap); - va_end(ap); - } else { - encoder->name = kasprintf(GFP_KERNEL, "%s-%d", - drm_encoder_enum_list[encoder_type].name, - encoder->base.id); - } - if (!encoder->name) { - ret = -ENOMEM; - goto out_put; - } - - list_add_tail(&encoder->head, &dev->mode_config.encoder_list); - encoder->index = dev->mode_config.num_encoder++; - -out_put: - if (ret) - drm_mode_object_unregister(dev, &encoder->base); - -out_unlock: - drm_modeset_unlock_all(dev); - - return ret; -} -EXPORT_SYMBOL(drm_encoder_init); - -/** - * drm_encoder_cleanup - cleans up an initialised encoder - * @encoder: encoder to cleanup - * - * Cleans up the encoder but doesn't free the object. - */ -void drm_encoder_cleanup(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - - /* Note that the encoder_list is considered to be static; should we - * remove the drm_encoder at runtime we would have to decrement all - * the indices on the drm_encoder after us in the encoder_list. - */ - - drm_modeset_lock_all(dev); - drm_mode_object_unregister(dev, &encoder->base); - kfree(encoder->name); - list_del(&encoder->head); - dev->mode_config.num_encoder--; - drm_modeset_unlock_all(dev); - - memset(encoder, 0, sizeof(*encoder)); -} -EXPORT_SYMBOL(drm_encoder_cleanup); - static unsigned int drm_num_planes(struct drm_device *dev) { unsigned int num = 0; @@ -1133,115 +854,6 @@ int drm_mode_getcrtc(struct drm_device *dev, return 0; } -/* helper for getconnector and getproperties ioctls */ -int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic, - uint32_t __user *prop_ptr, - uint64_t __user *prop_values, - uint32_t *arg_count_props) -{ - int props_count; - int i, ret, copied; - - props_count = obj->properties->count; - if (!atomic) - props_count -= obj->properties->atomic_count; - - if ((*arg_count_props >= props_count) && props_count) { - for (i = 0, copied = 0; copied < props_count; i++) { - struct drm_property *prop = obj->properties->properties[i]; - uint64_t val; - - if ((prop->flags & DRM_MODE_PROP_ATOMIC) && !atomic) - continue; - - ret = drm_object_property_get_value(obj, prop, &val); - if (ret) - return ret; - - if (put_user(prop->base.id, prop_ptr + copied)) - return -EFAULT; - - if (put_user(val, prop_values + copied)) - return -EFAULT; - - copied++; - } - } - *arg_count_props = props_count; - - return 0; -} - -static struct drm_crtc *drm_encoder_get_crtc(struct drm_encoder *encoder) -{ - struct drm_connector *connector; - struct drm_device *dev = encoder->dev; - bool uses_atomic = false; - - /* For atomic drivers only state objects are synchronously updated and - * protected by modeset locks, so check those first. */ - drm_for_each_connector(connector, dev) { - if (!connector->state) - continue; - - uses_atomic = true; - - if (connector->state->best_encoder != encoder) - continue; - - return connector->state->crtc; - } - - /* Don't return stale data (e.g. pending async disable). */ - if (uses_atomic) - return NULL; - - return encoder->crtc; -} - -/** - * drm_mode_getencoder - get encoder configuration - * @dev: drm device for the ioctl - * @data: data pointer for the ioctl - * @file_priv: drm file for the ioctl call - * - * Construct a encoder configuration structure to return to the user. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_getencoder(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_mode_get_encoder *enc_resp = data; - struct drm_encoder *encoder; - struct drm_crtc *crtc; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - encoder = drm_encoder_find(dev, enc_resp->encoder_id); - if (!encoder) - return -ENOENT; - - drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); - crtc = drm_encoder_get_crtc(encoder); - if (crtc) - enc_resp->crtc_id = crtc->base.id; - else - enc_resp->crtc_id = 0; - drm_modeset_unlock(&dev->mode_config.connection_mutex); - - enc_resp->encoder_type = encoder->encoder_type; - enc_resp->encoder_id = encoder->base.id; - enc_resp->possible_crtcs = encoder->possible_crtcs; - enc_resp->possible_clones = encoder->possible_clones; - - return 0; -} - /** * drm_mode_getplane_res - enumerate all plane resources * @dev: DRM device @@ -2059,1077 +1671,9 @@ int drm_mode_cursor2_ioctl(struct drm_device *dev, return drm_mode_cursor_common(dev, req, file_priv); } -/** - * drm_mode_legacy_fb_format - compute drm fourcc code from legacy description - * @bpp: bits per pixels - * @depth: bit depth per pixel - * - * Computes a drm fourcc pixel format code for the given @bpp/@depth values. - * Useful in fbdev emulation code, since that deals in those values. - */ -uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth) -{ - uint32_t fmt; - - switch (bpp) { - case 8: - fmt = DRM_FORMAT_C8; - break; - case 16: - if (depth == 15) - fmt = DRM_FORMAT_XRGB1555; - else - fmt = DRM_FORMAT_RGB565; - break; - case 24: - fmt = DRM_FORMAT_RGB888; - break; - case 32: - if (depth == 24) - fmt = DRM_FORMAT_XRGB8888; - else if (depth == 30) - fmt = DRM_FORMAT_XRGB2101010; - else - fmt = DRM_FORMAT_ARGB8888; - break; - default: - DRM_ERROR("bad bpp, assuming x8r8g8b8 pixel format\n"); - fmt = DRM_FORMAT_XRGB8888; - break; - } - - return fmt; -} -EXPORT_SYMBOL(drm_mode_legacy_fb_format); - -static bool drm_property_type_valid(struct drm_property *property) -{ - if (property->flags & DRM_MODE_PROP_EXTENDED_TYPE) - return !(property->flags & DRM_MODE_PROP_LEGACY_TYPE); - return !!(property->flags & DRM_MODE_PROP_LEGACY_TYPE); -} - -/** - * drm_property_create - create a new property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * @num_values: number of pre-defined values - * - * This creates a new generic drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * Note that the DRM core keeps a per-device list of properties and that, if - * drm_mode_config_cleanup() is called, it will destroy all properties created - * by the driver. - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create(struct drm_device *dev, int flags, - const char *name, int num_values) -{ - struct drm_property *property = NULL; - int ret; - - property = kzalloc(sizeof(struct drm_property), GFP_KERNEL); - if (!property) - return NULL; - - property->dev = dev; - - if (num_values) { - property->values = kcalloc(num_values, sizeof(uint64_t), - GFP_KERNEL); - if (!property->values) - goto fail; - } - - ret = drm_mode_object_get(dev, &property->base, DRM_MODE_OBJECT_PROPERTY); - if (ret) - goto fail; - - property->flags = flags; - property->num_values = num_values; - INIT_LIST_HEAD(&property->enum_list); - - if (name) { - strncpy(property->name, name, DRM_PROP_NAME_LEN); - property->name[DRM_PROP_NAME_LEN-1] = '\0'; - } - - list_add_tail(&property->head, &dev->mode_config.property_list); - - WARN_ON(!drm_property_type_valid(property)); - - return property; -fail: - kfree(property->values); - kfree(property); - return NULL; -} -EXPORT_SYMBOL(drm_property_create); - -/** - * drm_property_create_enum - create a new enumeration property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * @props: enumeration lists with property values - * @num_values: number of pre-defined values - * - * This creates a new generic drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * Userspace is only allowed to set one of the predefined values for enumeration - * properties. - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags, - const char *name, - const struct drm_prop_enum_list *props, - int num_values) -{ - struct drm_property *property; - int i, ret; - - flags |= DRM_MODE_PROP_ENUM; - - property = drm_property_create(dev, flags, name, num_values); - if (!property) - return NULL; - - for (i = 0; i < num_values; i++) { - ret = drm_property_add_enum(property, i, - props[i].type, - props[i].name); - if (ret) { - drm_property_destroy(dev, property); - return NULL; - } - } - - return property; -} -EXPORT_SYMBOL(drm_property_create_enum); - -/** - * drm_property_create_bitmask - create a new bitmask property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * @props: enumeration lists with property bitflags - * @num_props: size of the @props array - * @supported_bits: bitmask of all supported enumeration values - * - * This creates a new bitmask drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * Compared to plain enumeration properties userspace is allowed to set any - * or'ed together combination of the predefined property bitflag values - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create_bitmask(struct drm_device *dev, - int flags, const char *name, - const struct drm_prop_enum_list *props, - int num_props, - uint64_t supported_bits) -{ - struct drm_property *property; - int i, ret, index = 0; - int num_values = hweight64(supported_bits); - - flags |= DRM_MODE_PROP_BITMASK; - - property = drm_property_create(dev, flags, name, num_values); - if (!property) - return NULL; - for (i = 0; i < num_props; i++) { - if (!(supported_bits & (1ULL << props[i].type))) - continue; - - if (WARN_ON(index >= num_values)) { - drm_property_destroy(dev, property); - return NULL; - } - - ret = drm_property_add_enum(property, index++, - props[i].type, - props[i].name); - if (ret) { - drm_property_destroy(dev, property); - return NULL; - } - } - - return property; -} -EXPORT_SYMBOL(drm_property_create_bitmask); - -static struct drm_property *property_create_range(struct drm_device *dev, - int flags, const char *name, - uint64_t min, uint64_t max) -{ - struct drm_property *property; - - property = drm_property_create(dev, flags, name, 2); - if (!property) - return NULL; - - property->values[0] = min; - property->values[1] = max; - - return property; -} - -/** - * drm_property_create_range - create a new unsigned ranged property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * @min: minimum value of the property - * @max: maximum value of the property - * - * This creates a new generic drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * Userspace is allowed to set any unsigned integer value in the (min, max) - * range inclusive. - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create_range(struct drm_device *dev, int flags, - const char *name, - uint64_t min, uint64_t max) -{ - return property_create_range(dev, DRM_MODE_PROP_RANGE | flags, - name, min, max); -} -EXPORT_SYMBOL(drm_property_create_range); - -/** - * drm_property_create_signed_range - create a new signed ranged property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * @min: minimum value of the property - * @max: maximum value of the property - * - * This creates a new generic drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * Userspace is allowed to set any signed integer value in the (min, max) - * range inclusive. - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create_signed_range(struct drm_device *dev, - int flags, const char *name, - int64_t min, int64_t max) -{ - return property_create_range(dev, DRM_MODE_PROP_SIGNED_RANGE | flags, - name, I642U64(min), I642U64(max)); -} -EXPORT_SYMBOL(drm_property_create_signed_range); - -/** - * drm_property_create_object - create a new object property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * @type: object type from DRM_MODE_OBJECT_* defines - * - * This creates a new generic drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * Userspace is only allowed to set this to any property value of the given - * @type. Only useful for atomic properties, which is enforced. - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create_object(struct drm_device *dev, - int flags, const char *name, uint32_t type) -{ - struct drm_property *property; - - flags |= DRM_MODE_PROP_OBJECT; - - if (WARN_ON(!(flags & DRM_MODE_PROP_ATOMIC))) - return NULL; - - property = drm_property_create(dev, flags, name, 1); - if (!property) - return NULL; - - property->values[0] = type; - - return property; -} -EXPORT_SYMBOL(drm_property_create_object); - -/** - * drm_property_create_bool - create a new boolean property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * - * This creates a new generic drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * This is implemented as a ranged property with only {0, 1} as valid values. - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create_bool(struct drm_device *dev, int flags, - const char *name) -{ - return drm_property_create_range(dev, flags, name, 0, 1); -} -EXPORT_SYMBOL(drm_property_create_bool); - -/** - * drm_property_add_enum - add a possible value to an enumeration property - * @property: enumeration property to change - * @index: index of the new enumeration - * @value: value of the new enumeration - * @name: symbolic name of the new enumeration - * - * This functions adds enumerations to a property. - * - * It's use is deprecated, drivers should use one of the more specific helpers - * to directly create the property with all enumerations already attached. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_property_add_enum(struct drm_property *property, int index, - uint64_t value, const char *name) -{ - struct drm_property_enum *prop_enum; - - if (!(drm_property_type_is(property, DRM_MODE_PROP_ENUM) || - drm_property_type_is(property, DRM_MODE_PROP_BITMASK))) - return -EINVAL; - - /* - * Bitmask enum properties have the additional constraint of values - * from 0 to 63 - */ - if (drm_property_type_is(property, DRM_MODE_PROP_BITMASK) && - (value > 63)) - return -EINVAL; - - if (!list_empty(&property->enum_list)) { - list_for_each_entry(prop_enum, &property->enum_list, head) { - if (prop_enum->value == value) { - strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN); - prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0'; - return 0; - } - } - } - - prop_enum = kzalloc(sizeof(struct drm_property_enum), GFP_KERNEL); - if (!prop_enum) - return -ENOMEM; - - strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN); - prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0'; - prop_enum->value = value; - - property->values[index] = value; - list_add_tail(&prop_enum->head, &property->enum_list); - return 0; -} -EXPORT_SYMBOL(drm_property_add_enum); - -/** - * drm_property_destroy - destroy a drm property - * @dev: drm device - * @property: property to destry - * - * This function frees a property including any attached resources like - * enumeration values. - */ -void drm_property_destroy(struct drm_device *dev, struct drm_property *property) -{ - struct drm_property_enum *prop_enum, *pt; - - list_for_each_entry_safe(prop_enum, pt, &property->enum_list, head) { - list_del(&prop_enum->head); - kfree(prop_enum); - } - - if (property->num_values) - kfree(property->values); - drm_mode_object_unregister(dev, &property->base); - list_del(&property->head); - kfree(property); -} -EXPORT_SYMBOL(drm_property_destroy); - -/** - * drm_object_attach_property - attach a property to a modeset object - * @obj: drm modeset object - * @property: property to attach - * @init_val: initial value of the property - * - * This attaches the given property to the modeset object with the given initial - * value. Currently this function cannot fail since the properties are stored in - * a statically sized array. - */ -void drm_object_attach_property(struct drm_mode_object *obj, - struct drm_property *property, - uint64_t init_val) -{ - int count = obj->properties->count; - - if (count == DRM_OBJECT_MAX_PROPERTY) { - WARN(1, "Failed to attach object property (type: 0x%x). Please " - "increase DRM_OBJECT_MAX_PROPERTY by 1 for each time " - "you see this message on the same object type.\n", - obj->type); - return; - } - - obj->properties->properties[count] = property; - obj->properties->values[count] = init_val; - obj->properties->count++; - if (property->flags & DRM_MODE_PROP_ATOMIC) - obj->properties->atomic_count++; -} -EXPORT_SYMBOL(drm_object_attach_property); - -/** - * drm_object_property_set_value - set the value of a property - * @obj: drm mode object to set property value for - * @property: property to set - * @val: value the property should be set to - * - * This functions sets a given property on a given object. This function only - * changes the software state of the property, it does not call into the - * driver's ->set_property callback. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_object_property_set_value(struct drm_mode_object *obj, - struct drm_property *property, uint64_t val) -{ - int i; - - for (i = 0; i < obj->properties->count; i++) { - if (obj->properties->properties[i] == property) { - obj->properties->values[i] = val; - return 0; - } - } - - return -EINVAL; -} -EXPORT_SYMBOL(drm_object_property_set_value); - -/** - * drm_object_property_get_value - retrieve the value of a property - * @obj: drm mode object to get property value from - * @property: property to retrieve - * @val: storage for the property value - * - * This function retrieves the softare state of the given property for the given - * property. Since there is no driver callback to retrieve the current property - * value this might be out of sync with the hardware, depending upon the driver - * and property. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_object_property_get_value(struct drm_mode_object *obj, - struct drm_property *property, uint64_t *val) -{ - int i; - - /* read-only properties bypass atomic mechanism and still store - * their value in obj->properties->values[].. mostly to avoid - * having to deal w/ EDID and similar props in atomic paths: - */ - if (drm_core_check_feature(property->dev, DRIVER_ATOMIC) && - !(property->flags & DRM_MODE_PROP_IMMUTABLE)) - return drm_atomic_get_property(obj, property, val); - - for (i = 0; i < obj->properties->count; i++) { - if (obj->properties->properties[i] == property) { - *val = obj->properties->values[i]; - return 0; - } - } - - return -EINVAL; -} -EXPORT_SYMBOL(drm_object_property_get_value); - -/** - * drm_mode_getproperty_ioctl - get the property metadata - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * This function retrieves the metadata for a given property, like the different - * possible values for an enum property or the limits for a range property. - * - * Blob properties are special - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_getproperty_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_get_property *out_resp = data; - struct drm_property *property; - int enum_count = 0; - int value_count = 0; - int ret = 0, i; - int copied; - struct drm_property_enum *prop_enum; - struct drm_mode_property_enum __user *enum_ptr; - uint64_t __user *values_ptr; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - drm_modeset_lock_all(dev); - property = drm_property_find(dev, out_resp->prop_id); - if (!property) { - ret = -ENOENT; - goto done; - } - - if (drm_property_type_is(property, DRM_MODE_PROP_ENUM) || - drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) { - list_for_each_entry(prop_enum, &property->enum_list, head) - enum_count++; - } - - value_count = property->num_values; - - strncpy(out_resp->name, property->name, DRM_PROP_NAME_LEN); - out_resp->name[DRM_PROP_NAME_LEN-1] = 0; - out_resp->flags = property->flags; - - if ((out_resp->count_values >= value_count) && value_count) { - values_ptr = (uint64_t __user *)(unsigned long)out_resp->values_ptr; - for (i = 0; i < value_count; i++) { - if (copy_to_user(values_ptr + i, &property->values[i], sizeof(uint64_t))) { - ret = -EFAULT; - goto done; - } - } - } - out_resp->count_values = value_count; - - if (drm_property_type_is(property, DRM_MODE_PROP_ENUM) || - drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) { - if ((out_resp->count_enum_blobs >= enum_count) && enum_count) { - copied = 0; - enum_ptr = (struct drm_mode_property_enum __user *)(unsigned long)out_resp->enum_blob_ptr; - list_for_each_entry(prop_enum, &property->enum_list, head) { - - if (copy_to_user(&enum_ptr[copied].value, &prop_enum->value, sizeof(uint64_t))) { - ret = -EFAULT; - goto done; - } - - if (copy_to_user(&enum_ptr[copied].name, - &prop_enum->name, DRM_PROP_NAME_LEN)) { - ret = -EFAULT; - goto done; - } - copied++; - } - } - out_resp->count_enum_blobs = enum_count; - } - - /* - * NOTE: The idea seems to have been to use this to read all the blob - * property values. But nothing ever added them to the corresponding - * list, userspace always used the special-purpose get_blob ioctl to - * read the value for a blob property. It also doesn't make a lot of - * sense to return values here when everything else is just metadata for - * the property itself. - */ - if (drm_property_type_is(property, DRM_MODE_PROP_BLOB)) - out_resp->count_enum_blobs = 0; -done: - drm_modeset_unlock_all(dev); - return ret; -} - -static void drm_property_free_blob(struct kref *kref) -{ - struct drm_property_blob *blob = - container_of(kref, struct drm_property_blob, base.refcount); - - mutex_lock(&blob->dev->mode_config.blob_lock); - list_del(&blob->head_global); - mutex_unlock(&blob->dev->mode_config.blob_lock); - - drm_mode_object_unregister(blob->dev, &blob->base); - - kfree(blob); -} - -/** - * drm_property_create_blob - Create new blob property - * - * Creates a new blob property for a specified DRM device, optionally - * copying data. - * - * @dev: DRM device to create property for - * @length: Length to allocate for blob data - * @data: If specified, copies data into blob - * - * Returns: - * New blob property with a single reference on success, or an ERR_PTR - * value on failure. - */ -struct drm_property_blob * -drm_property_create_blob(struct drm_device *dev, size_t length, - const void *data) -{ - struct drm_property_blob *blob; - int ret; - - if (!length || length > ULONG_MAX - sizeof(struct drm_property_blob)) - return ERR_PTR(-EINVAL); - - blob = kzalloc(sizeof(struct drm_property_blob)+length, GFP_KERNEL); - if (!blob) - return ERR_PTR(-ENOMEM); - - /* This must be explicitly initialised, so we can safely call list_del - * on it in the removal handler, even if it isn't in a file list. */ - INIT_LIST_HEAD(&blob->head_file); - blob->length = length; - blob->dev = dev; - - if (data) - memcpy(blob->data, data, length); - - ret = drm_mode_object_get_reg(dev, &blob->base, DRM_MODE_OBJECT_BLOB, - true, drm_property_free_blob); - if (ret) { - kfree(blob); - return ERR_PTR(-EINVAL); - } - - mutex_lock(&dev->mode_config.blob_lock); - list_add_tail(&blob->head_global, - &dev->mode_config.property_blob_list); - mutex_unlock(&dev->mode_config.blob_lock); - - return blob; -} -EXPORT_SYMBOL(drm_property_create_blob); - -/** - * drm_property_unreference_blob - Unreference a blob property - * - * Drop a reference on a blob property. May free the object. - * - * @blob: Pointer to blob property - */ -void drm_property_unreference_blob(struct drm_property_blob *blob) -{ - if (!blob) - return; - - drm_mode_object_unreference(&blob->base); -} -EXPORT_SYMBOL(drm_property_unreference_blob); - -/** - * drm_property_destroy_user_blobs - destroy all blobs created by this client - * @dev: DRM device - * @file_priv: destroy all blobs owned by this file handle - */ -void drm_property_destroy_user_blobs(struct drm_device *dev, - struct drm_file *file_priv) -{ - struct drm_property_blob *blob, *bt; - - /* - * When the file gets released that means no one else can access the - * blob list any more, so no need to grab dev->blob_lock. - */ - list_for_each_entry_safe(blob, bt, &file_priv->blobs, head_file) { - list_del_init(&blob->head_file); - drm_property_unreference_blob(blob); - } -} - -/** - * drm_property_reference_blob - Take a reference on an existing property - * - * Take a new reference on an existing blob property. - * - * @blob: Pointer to blob property - */ -struct drm_property_blob *drm_property_reference_blob(struct drm_property_blob *blob) -{ - drm_mode_object_reference(&blob->base); - return blob; -} -EXPORT_SYMBOL(drm_property_reference_blob); - -/** - * drm_property_lookup_blob - look up a blob property and take a reference - * @dev: drm device - * @id: id of the blob property - * - * If successful, this takes an additional reference to the blob property. - * callers need to make sure to eventually unreference the returned property - * again, using @drm_property_unreference_blob. - */ -struct drm_property_blob *drm_property_lookup_blob(struct drm_device *dev, - uint32_t id) -{ - struct drm_mode_object *obj; - struct drm_property_blob *blob = NULL; - - obj = __drm_mode_object_find(dev, id, DRM_MODE_OBJECT_BLOB); - if (obj) - blob = obj_to_blob(obj); - return blob; -} -EXPORT_SYMBOL(drm_property_lookup_blob); - -/** - * drm_property_replace_global_blob - atomically replace existing blob property - * @dev: drm device - * @replace: location of blob property pointer to be replaced - * @length: length of data for new blob, or 0 for no data - * @data: content for new blob, or NULL for no data - * @obj_holds_id: optional object for property holding blob ID - * @prop_holds_id: optional property holding blob ID - * @return 0 on success or error on failure - * - * This function will atomically replace a global property in the blob list, - * optionally updating a property which holds the ID of that property. It is - * guaranteed to be atomic: no caller will be allowed to see intermediate - * results, and either the entire operation will succeed and clean up the - * previous property, or it will fail and the state will be unchanged. - * - * If length is 0 or data is NULL, no new blob will be created, and the holding - * property, if specified, will be set to 0. - * - * Access to the replace pointer is assumed to be protected by the caller, e.g. - * by holding the relevant modesetting object lock for its parent. - * - * For example, a drm_connector has a 'PATH' property, which contains the ID - * of a blob property with the value of the MST path information. Calling this - * function with replace pointing to the connector's path_blob_ptr, length and - * data set for the new path information, obj_holds_id set to the connector's - * base object, and prop_holds_id set to the path property name, will perform - * a completely atomic update. The access to path_blob_ptr is protected by the - * caller holding a lock on the connector. - */ -int drm_property_replace_global_blob(struct drm_device *dev, - struct drm_property_blob **replace, - size_t length, - const void *data, - struct drm_mode_object *obj_holds_id, - struct drm_property *prop_holds_id) -{ - struct drm_property_blob *new_blob = NULL; - struct drm_property_blob *old_blob = NULL; - int ret; - - WARN_ON(replace == NULL); - - old_blob = *replace; - - if (length && data) { - new_blob = drm_property_create_blob(dev, length, data); - if (IS_ERR(new_blob)) - return PTR_ERR(new_blob); - } - - /* This does not need to be synchronised with blob_lock, as the - * get_properties ioctl locks all modesetting objects, and - * obj_holds_id must be locked before calling here, so we cannot - * have its value out of sync with the list membership modified - * below under blob_lock. */ - if (obj_holds_id) { - ret = drm_object_property_set_value(obj_holds_id, - prop_holds_id, - new_blob ? - new_blob->base.id : 0); - if (ret != 0) - goto err_created; - } - - drm_property_unreference_blob(old_blob); - *replace = new_blob; - - return 0; - -err_created: - drm_property_unreference_blob(new_blob); - return ret; -} -EXPORT_SYMBOL(drm_property_replace_global_blob); - -/** - * drm_mode_getblob_ioctl - get the contents of a blob property value - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * This function retrieves the contents of a blob property. The value stored in - * an object's blob property is just a normal modeset object id. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_getblob_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_get_blob *out_resp = data; - struct drm_property_blob *blob; - int ret = 0; - void __user *blob_ptr; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - blob = drm_property_lookup_blob(dev, out_resp->blob_id); - if (!blob) - return -ENOENT; - - if (out_resp->length == blob->length) { - blob_ptr = (void __user *)(unsigned long)out_resp->data; - if (copy_to_user(blob_ptr, blob->data, blob->length)) { - ret = -EFAULT; - goto unref; - } - } - out_resp->length = blob->length; -unref: - drm_property_unreference_blob(blob); - - return ret; -} - -/** - * drm_mode_createblob_ioctl - create a new blob property - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * This function creates a new blob property with user-defined values. In order - * to give us sensible validation and checking when creating, rather than at - * every potential use, we also require a type to be provided upfront. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_createblob_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_create_blob *out_resp = data; - struct drm_property_blob *blob; - void __user *blob_ptr; - int ret = 0; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - blob = drm_property_create_blob(dev, out_resp->length, NULL); - if (IS_ERR(blob)) - return PTR_ERR(blob); - - blob_ptr = (void __user *)(unsigned long)out_resp->data; - if (copy_from_user(blob->data, blob_ptr, out_resp->length)) { - ret = -EFAULT; - goto out_blob; - } - - /* Dropping the lock between create_blob and our access here is safe - * as only the same file_priv can remove the blob; at this point, it is - * not associated with any file_priv. */ - mutex_lock(&dev->mode_config.blob_lock); - out_resp->blob_id = blob->base.id; - list_add_tail(&blob->head_file, &file_priv->blobs); - mutex_unlock(&dev->mode_config.blob_lock); - - return 0; - -out_blob: - drm_property_unreference_blob(blob); - return ret; -} - -/** - * drm_mode_destroyblob_ioctl - destroy a user blob property - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * Destroy an existing user-defined blob property. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_destroyblob_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_destroy_blob *out_resp = data; - struct drm_property_blob *blob = NULL, *bt; - bool found = false; - int ret = 0; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - blob = drm_property_lookup_blob(dev, out_resp->blob_id); - if (!blob) - return -ENOENT; - - mutex_lock(&dev->mode_config.blob_lock); - /* Ensure the property was actually created by this user. */ - list_for_each_entry(bt, &file_priv->blobs, head_file) { - if (bt == blob) { - found = true; - break; - } - } - - if (!found) { - ret = -EPERM; - goto err; - } - - /* We must drop head_file here, because we may not be the last - * reference on the blob. */ - list_del_init(&blob->head_file); - mutex_unlock(&dev->mode_config.blob_lock); - - /* One reference from lookup, and one from the filp. */ - drm_property_unreference_blob(blob); - drm_property_unreference_blob(blob); - - return 0; - -err: - mutex_unlock(&dev->mode_config.blob_lock); - drm_property_unreference_blob(blob); - - return ret; -} - -/* Some properties could refer to dynamic refcnt'd objects, or things that - * need special locking to handle lifetime issues (ie. to ensure the prop - * value doesn't become invalid part way through the property update due to - * race). The value returned by reference via 'obj' should be passed back - * to drm_property_change_valid_put() after the property is set (and the - * object to which the property is attached has a chance to take it's own - * reference). - */ -bool drm_property_change_valid_get(struct drm_property *property, - uint64_t value, struct drm_mode_object **ref) -{ - int i; - - if (property->flags & DRM_MODE_PROP_IMMUTABLE) - return false; - - *ref = NULL; - - if (drm_property_type_is(property, DRM_MODE_PROP_RANGE)) { - if (value < property->values[0] || value > property->values[1]) - return false; - return true; - } else if (drm_property_type_is(property, DRM_MODE_PROP_SIGNED_RANGE)) { - int64_t svalue = U642I64(value); - - if (svalue < U642I64(property->values[0]) || - svalue > U642I64(property->values[1])) - return false; - return true; - } else if (drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) { - uint64_t valid_mask = 0; - - for (i = 0; i < property->num_values; i++) - valid_mask |= (1ULL << property->values[i]); - return !(value & ~valid_mask); - } else if (drm_property_type_is(property, DRM_MODE_PROP_BLOB)) { - struct drm_property_blob *blob; - - if (value == 0) - return true; - - blob = drm_property_lookup_blob(property->dev, value); - if (blob) { - *ref = &blob->base; - return true; - } else { - return false; - } - } else if (drm_property_type_is(property, DRM_MODE_PROP_OBJECT)) { - /* a zero value for an object property translates to null: */ - if (value == 0) - return true; - - *ref = __drm_mode_object_find(property->dev, value, - property->values[0]); - return *ref != NULL; - } - - for (i = 0; i < property->num_values; i++) - if (property->values[i] == value) - return true; - return false; -} - -void drm_property_change_valid_put(struct drm_property *property, - struct drm_mode_object *ref) -{ - if (!ref) - return; - - if (drm_property_type_is(property, DRM_MODE_PROP_OBJECT)) { - drm_mode_object_unreference(ref); - } else if (drm_property_type_is(property, DRM_MODE_PROP_BLOB)) - drm_property_unreference_blob(obj_to_blob(ref)); -} - -static int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj, - struct drm_property *property, - uint64_t value) +int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj, + struct drm_property *property, + uint64_t value) { int ret = -EINVAL; struct drm_crtc *crtc = obj_to_crtc(obj); @@ -3172,119 +1716,6 @@ int drm_mode_plane_set_obj_prop(struct drm_plane *plane, EXPORT_SYMBOL(drm_mode_plane_set_obj_prop); /** - * drm_mode_obj_get_properties_ioctl - get the current value of a object's property - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * This function retrieves the current value for an object's property. Compared - * to the connector specific ioctl this one is extended to also work on crtc and - * plane objects. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_mode_obj_get_properties *arg = data; - struct drm_mode_object *obj; - int ret = 0; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - drm_modeset_lock_all(dev); - - obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type); - if (!obj) { - ret = -ENOENT; - goto out; - } - if (!obj->properties) { - ret = -EINVAL; - goto out_unref; - } - - ret = drm_mode_object_get_properties(obj, file_priv->atomic, - (uint32_t __user *)(unsigned long)(arg->props_ptr), - (uint64_t __user *)(unsigned long)(arg->prop_values_ptr), - &arg->count_props); - -out_unref: - drm_mode_object_unreference(obj); -out: - drm_modeset_unlock_all(dev); - return ret; -} - -int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_mode_obj_set_property *arg = data; - struct drm_mode_object *arg_obj; - struct drm_mode_object *prop_obj; - struct drm_property *property; - int i, ret = -EINVAL; - struct drm_mode_object *ref; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - drm_modeset_lock_all(dev); - - arg_obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type); - if (!arg_obj) { - ret = -ENOENT; - goto out; - } - if (!arg_obj->properties) - goto out_unref; - - for (i = 0; i < arg_obj->properties->count; i++) - if (arg_obj->properties->properties[i]->base.id == arg->prop_id) - break; - - if (i == arg_obj->properties->count) - goto out_unref; - - prop_obj = drm_mode_object_find(dev, arg->prop_id, - DRM_MODE_OBJECT_PROPERTY); - if (!prop_obj) { - ret = -ENOENT; - goto out_unref; - } - property = obj_to_property(prop_obj); - - if (!drm_property_change_valid_get(property, arg->value, &ref)) - goto out_unref; - - switch (arg_obj->type) { - case DRM_MODE_OBJECT_CONNECTOR: - ret = drm_mode_connector_set_obj_prop(arg_obj, property, - arg->value); - break; - case DRM_MODE_OBJECT_CRTC: - ret = drm_mode_crtc_set_obj_prop(arg_obj, property, arg->value); - break; - case DRM_MODE_OBJECT_PLANE: - ret = drm_mode_plane_set_obj_prop(obj_to_plane(arg_obj), - property, arg->value); - break; - } - - drm_property_change_valid_put(property, ref); - -out_unref: - drm_mode_object_unreference(arg_obj); -out: - drm_modeset_unlock_all(dev); - return ret; -} - -/** * drm_mode_crtc_set_gamma_size - set the gamma table size * @crtc: CRTC to set the gamma table size for * @gamma_size: size of the gamma table diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h index 62efb9d09a85..a3622644bccf 100644 --- a/drivers/gpu/drm/drm_crtc_internal.h +++ b/drivers/gpu/drm/drm_crtc_internal.h @@ -33,29 +33,9 @@ /* drm_crtc.c */ -int drm_mode_object_get_reg(struct drm_device *dev, - struct drm_mode_object *obj, - uint32_t obj_type, - bool register_obj, - void (*obj_free_cb)(struct kref *kref)); -void drm_mode_object_register(struct drm_device *dev, - struct drm_mode_object *obj); -int drm_mode_object_get(struct drm_device *dev, - struct drm_mode_object *obj, uint32_t obj_type); -struct drm_mode_object *__drm_mode_object_find(struct drm_device *dev, - uint32_t id, uint32_t type); -void drm_mode_object_unregister(struct drm_device *dev, - struct drm_mode_object *object); -int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic, - uint32_t __user *prop_ptr, - uint64_t __user *prop_values, - uint32_t *arg_count_props); -bool drm_property_change_valid_get(struct drm_property *property, - uint64_t value, - struct drm_mode_object **ref); -void drm_property_change_valid_put(struct drm_property *property, - struct drm_mode_object *ref); - +int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj, + struct drm_property *property, + uint64_t value); int drm_plane_check_pixel_format(const struct drm_plane *plane, u32 format); int drm_crtc_check_viewport(const struct drm_crtc *crtc, @@ -64,8 +44,6 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc, const struct drm_framebuffer *fb); void drm_fb_release(struct drm_file *file_priv); -void drm_property_destroy_user_blobs(struct drm_device *dev, - struct drm_file *file_priv); /* dumb buffer support IOCTLs */ int drm_mode_create_dumb_ioctl(struct drm_device *dev, @@ -76,11 +54,6 @@ int drm_mode_destroy_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); /* IOCTLs */ -int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); -int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv); - int drm_mode_getresources(struct drm_device *dev, void *data, struct drm_file *file_priv); int drm_mode_getplane_res(struct drm_device *dev, void *data, @@ -97,6 +70,24 @@ int drm_mode_cursor_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); int drm_mode_cursor2_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); +int drm_mode_gamma_get_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); +int drm_mode_gamma_set_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); + +int drm_mode_page_flip_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv); + +/* drm_property.c */ +void drm_property_destroy_user_blobs(struct drm_device *dev, + struct drm_file *file_priv); +bool drm_property_change_valid_get(struct drm_property *property, + uint64_t value, + struct drm_mode_object **ref); +void drm_property_change_valid_put(struct drm_property *property, + struct drm_mode_object *ref); + +/* IOCTL */ int drm_mode_getproperty_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); int drm_mode_getblob_ioctl(struct drm_device *dev, @@ -105,15 +96,40 @@ int drm_mode_createblob_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); int drm_mode_destroyblob_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); + +/* drm_mode_object.c */ +int drm_mode_object_get_reg(struct drm_device *dev, + struct drm_mode_object *obj, + uint32_t obj_type, + bool register_obj, + void (*obj_free_cb)(struct kref *kref)); +void drm_mode_object_register(struct drm_device *dev, + struct drm_mode_object *obj); +int drm_mode_object_get(struct drm_device *dev, + struct drm_mode_object *obj, uint32_t obj_type); +struct drm_mode_object *__drm_mode_object_find(struct drm_device *dev, + uint32_t id, uint32_t type); +void drm_mode_object_unregister(struct drm_device *dev, + struct drm_mode_object *object); +int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic, + uint32_t __user *prop_ptr, + uint64_t __user *prop_values, + uint32_t *arg_count_props); + +/* IOCTL */ + +int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); + +/* drm_encoder.c */ +int drm_encoder_register_all(struct drm_device *dev); +void drm_encoder_unregister_all(struct drm_device *dev); + +/* IOCTL */ int drm_mode_getencoder(struct drm_device *dev, void *data, struct drm_file *file_priv); -int drm_mode_gamma_get_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv); -int drm_mode_gamma_set_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv); - -int drm_mode_page_flip_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv); /* drm_connector.c */ void drm_connector_ida_init(void); diff --git a/drivers/gpu/drm/drm_encoder.c b/drivers/gpu/drm/drm_encoder.c new file mode 100644 index 000000000000..998a6743a586 --- /dev/null +++ b/drivers/gpu/drm/drm_encoder.c @@ -0,0 +1,232 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include <linux/export.h> +#include <drm/drmP.h> +#include <drm/drm_encoder.h> + +#include "drm_crtc_internal.h" + +/** + * DOC: overview + * + * Encoders represent the connecting element between the CRTC (as the overall + * pixel pipeline, represented by struct &drm_crtc) and the connectors (as the + * generic sink entity, represented by struct &drm_connector). Encoders are + * objects exposed to userspace, originally to allow userspace to infer cloning + * and connector/CRTC restrictions. Unfortunately almost all drivers get this + * wrong, making the uabi pretty much useless. On top of that the exposed + * restrictions are too simple for todays hardware, and the recommend way to + * infer restrictions is by using the DRM_MODE_ATOMIC_TEST_ONLY flag for the + * atomic IOCTL. + * + * Otherwise encoders aren't used in the uapi at all (any modeset request from + * userspace directly connects a connector with a CRTC), drivers are therefore + * free to use them however they wish. Modeset helper libraries make strong use + * of encoders to facilitate code sharing. But for more complex settings it is + * usually better to move shared code into a separate &drm_bridge. Compared to + * encoders bridges also have the benefit of not being purely an internal + * abstraction since they are not exposed to userspace at all. + * + * Encoders are initialized with drm_encoder_init() and cleaned up using + * drm_encoder_cleanup(). + */ +static const struct drm_prop_enum_list drm_encoder_enum_list[] = { + { DRM_MODE_ENCODER_NONE, "None" }, + { DRM_MODE_ENCODER_DAC, "DAC" }, + { DRM_MODE_ENCODER_TMDS, "TMDS" }, + { DRM_MODE_ENCODER_LVDS, "LVDS" }, + { DRM_MODE_ENCODER_TVDAC, "TV" }, + { DRM_MODE_ENCODER_VIRTUAL, "Virtual" }, + { DRM_MODE_ENCODER_DSI, "DSI" }, + { DRM_MODE_ENCODER_DPMST, "DP MST" }, + { DRM_MODE_ENCODER_DPI, "DPI" }, +}; + +int drm_encoder_register_all(struct drm_device *dev) +{ + struct drm_encoder *encoder; + int ret = 0; + + drm_for_each_encoder(encoder, dev) { + if (encoder->funcs->late_register) + ret = encoder->funcs->late_register(encoder); + if (ret) + return ret; + } + + return 0; +} + +void drm_encoder_unregister_all(struct drm_device *dev) +{ + struct drm_encoder *encoder; + + drm_for_each_encoder(encoder, dev) { + if (encoder->funcs->early_unregister) + encoder->funcs->early_unregister(encoder); + } +} + +/** + * drm_encoder_init - Init a preallocated encoder + * @dev: drm device + * @encoder: the encoder to init + * @funcs: callbacks for this encoder + * @encoder_type: user visible type of the encoder + * @name: printf style format string for the encoder name, or NULL for default name + * + * Initialises a preallocated encoder. Encoder should be subclassed as part of + * driver encoder objects. At driver unload time drm_encoder_cleanup() should be + * called from the driver's destroy hook in &drm_encoder_funcs. + * + * Returns: + * Zero on success, error code on failure. + */ +int drm_encoder_init(struct drm_device *dev, + struct drm_encoder *encoder, + const struct drm_encoder_funcs *funcs, + int encoder_type, const char *name, ...) +{ + int ret; + + drm_modeset_lock_all(dev); + + ret = drm_mode_object_get(dev, &encoder->base, DRM_MODE_OBJECT_ENCODER); + if (ret) + goto out_unlock; + + encoder->dev = dev; + encoder->encoder_type = encoder_type; + encoder->funcs = funcs; + if (name) { + va_list ap; + + va_start(ap, name); + encoder->name = kvasprintf(GFP_KERNEL, name, ap); + va_end(ap); + } else { + encoder->name = kasprintf(GFP_KERNEL, "%s-%d", + drm_encoder_enum_list[encoder_type].name, + encoder->base.id); + } + if (!encoder->name) { + ret = -ENOMEM; + goto out_put; + } + + list_add_tail(&encoder->head, &dev->mode_config.encoder_list); + encoder->index = dev->mode_config.num_encoder++; + +out_put: + if (ret) + drm_mode_object_unregister(dev, &encoder->base); + +out_unlock: + drm_modeset_unlock_all(dev); + + return ret; +} +EXPORT_SYMBOL(drm_encoder_init); + +/** + * drm_encoder_cleanup - cleans up an initialised encoder + * @encoder: encoder to cleanup + * + * Cleans up the encoder but doesn't free the object. + */ +void drm_encoder_cleanup(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + + /* Note that the encoder_list is considered to be static; should we + * remove the drm_encoder at runtime we would have to decrement all + * the indices on the drm_encoder after us in the encoder_list. + */ + + drm_modeset_lock_all(dev); + drm_mode_object_unregister(dev, &encoder->base); + kfree(encoder->name); + list_del(&encoder->head); + dev->mode_config.num_encoder--; + drm_modeset_unlock_all(dev); + + memset(encoder, 0, sizeof(*encoder)); +} +EXPORT_SYMBOL(drm_encoder_cleanup); + +static struct drm_crtc *drm_encoder_get_crtc(struct drm_encoder *encoder) +{ + struct drm_connector *connector; + struct drm_device *dev = encoder->dev; + bool uses_atomic = false; + + /* For atomic drivers only state objects are synchronously updated and + * protected by modeset locks, so check those first. */ + drm_for_each_connector(connector, dev) { + if (!connector->state) + continue; + + uses_atomic = true; + + if (connector->state->best_encoder != encoder) + continue; + + return connector->state->crtc; + } + + /* Don't return stale data (e.g. pending async disable). */ + if (uses_atomic) + return NULL; + + return encoder->crtc; +} + +int drm_mode_getencoder(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_mode_get_encoder *enc_resp = data; + struct drm_encoder *encoder; + struct drm_crtc *crtc; + + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + return -EINVAL; + + encoder = drm_encoder_find(dev, enc_resp->encoder_id); + if (!encoder) + return -ENOENT; + + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + crtc = drm_encoder_get_crtc(encoder); + if (crtc) + enc_resp->crtc_id = crtc->base.id; + else + enc_resp->crtc_id = 0; + drm_modeset_unlock(&dev->mode_config.connection_mutex); + + enc_resp->encoder_type = encoder->encoder_type; + enc_resp->encoder_id = encoder->base.id; + enc_resp->possible_crtcs = encoder->possible_crtcs; + enc_resp->possible_clones = encoder->possible_clones; + + return 0; +} diff --git a/drivers/gpu/drm/drm_fourcc.c b/drivers/gpu/drm/drm_fourcc.c index c81546c15c93..29c56b4331e0 100644 --- a/drivers/gpu/drm/drm_fourcc.c +++ b/drivers/gpu/drm/drm_fourcc.c @@ -36,6 +36,49 @@ static char printable_char(int c) } /** + * drm_mode_legacy_fb_format - compute drm fourcc code from legacy description + * @bpp: bits per pixels + * @depth: bit depth per pixel + * + * Computes a drm fourcc pixel format code for the given @bpp/@depth values. + * Useful in fbdev emulation code, since that deals in those values. + */ +uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth) +{ + uint32_t fmt; + + switch (bpp) { + case 8: + fmt = DRM_FORMAT_C8; + break; + case 16: + if (depth == 15) + fmt = DRM_FORMAT_XRGB1555; + else + fmt = DRM_FORMAT_RGB565; + break; + case 24: + fmt = DRM_FORMAT_RGB888; + break; + case 32: + if (depth == 24) + fmt = DRM_FORMAT_XRGB8888; + else if (depth == 30) + fmt = DRM_FORMAT_XRGB2101010; + else + fmt = DRM_FORMAT_ARGB8888; + break; + default: + DRM_ERROR("bad bpp, assuming x8r8g8b8 pixel format\n"); + fmt = DRM_FORMAT_XRGB8888; + break; + } + + return fmt; +} +EXPORT_SYMBOL(drm_mode_legacy_fb_format); + +/** * drm_get_format_name - return a string for drm fourcc format * @format: format to compute name of * diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c index 12b7753a0d27..b97c421c65f4 100644 --- a/drivers/gpu/drm/drm_ioctl.c +++ b/drivers/gpu/drm/drm_ioctl.c @@ -189,9 +189,8 @@ static int drm_getclient(struct drm_device *dev, void *data, */ if (client->idx == 0) { client->auth = file_priv->authenticated; - client->pid = pid_vnr(file_priv->pid); - client->uid = from_kuid_munged(current_user_ns(), - file_priv->uid); + client->pid = task_pid_vnr(current); + client->uid = overflowuid; client->magic = 0; client->iocs = 0; diff --git a/drivers/gpu/drm/drm_mode_object.c b/drivers/gpu/drm/drm_mode_object.c new file mode 100644 index 000000000000..6edda8382a4c --- /dev/null +++ b/drivers/gpu/drm/drm_mode_object.c @@ -0,0 +1,437 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include <linux/export.h> +#include <drm/drmP.h> +#include <drm/drm_mode_object.h> + +#include "drm_crtc_internal.h" + +/* + * Internal function to assign a slot in the object idr and optionally + * register the object into the idr. + */ +int drm_mode_object_get_reg(struct drm_device *dev, + struct drm_mode_object *obj, + uint32_t obj_type, + bool register_obj, + void (*obj_free_cb)(struct kref *kref)) +{ + int ret; + + mutex_lock(&dev->mode_config.idr_mutex); + ret = idr_alloc(&dev->mode_config.crtc_idr, register_obj ? obj : NULL, 1, 0, GFP_KERNEL); + if (ret >= 0) { + /* + * Set up the object linking under the protection of the idr + * lock so that other users can't see inconsistent state. + */ + obj->id = ret; + obj->type = obj_type; + if (obj_free_cb) { + obj->free_cb = obj_free_cb; + kref_init(&obj->refcount); + } + } + mutex_unlock(&dev->mode_config.idr_mutex); + + return ret < 0 ? ret : 0; +} + +/** + * drm_mode_object_get - allocate a new modeset identifier + * @dev: DRM device + * @obj: object pointer, used to generate unique ID + * @obj_type: object type + * + * Create a unique identifier based on @ptr in @dev's identifier space. Used + * for tracking modes, CRTCs and connectors. Note that despite the _get postfix + * modeset identifiers are _not_ reference counted. Hence don't use this for + * reference counted modeset objects like framebuffers. + * + * Returns: + * Zero on success, error code on failure. + */ +int drm_mode_object_get(struct drm_device *dev, + struct drm_mode_object *obj, uint32_t obj_type) +{ + return drm_mode_object_get_reg(dev, obj, obj_type, true, NULL); +} + +void drm_mode_object_register(struct drm_device *dev, + struct drm_mode_object *obj) +{ + mutex_lock(&dev->mode_config.idr_mutex); + idr_replace(&dev->mode_config.crtc_idr, obj, obj->id); + mutex_unlock(&dev->mode_config.idr_mutex); +} + +/** + * drm_mode_object_unregister - free a modeset identifer + * @dev: DRM device + * @object: object to free + * + * Free @id from @dev's unique identifier pool. + * This function can be called multiple times, and guards against + * multiple removals. + * These modeset identifiers are _not_ reference counted. Hence don't use this + * for reference counted modeset objects like framebuffers. + */ +void drm_mode_object_unregister(struct drm_device *dev, + struct drm_mode_object *object) +{ + mutex_lock(&dev->mode_config.idr_mutex); + if (object->id) { + idr_remove(&dev->mode_config.crtc_idr, object->id); + object->id = 0; + } + mutex_unlock(&dev->mode_config.idr_mutex); +} + +struct drm_mode_object *__drm_mode_object_find(struct drm_device *dev, + uint32_t id, uint32_t type) +{ + struct drm_mode_object *obj = NULL; + + mutex_lock(&dev->mode_config.idr_mutex); + obj = idr_find(&dev->mode_config.crtc_idr, id); + if (obj && type != DRM_MODE_OBJECT_ANY && obj->type != type) + obj = NULL; + if (obj && obj->id != id) + obj = NULL; + + if (obj && obj->free_cb) { + if (!kref_get_unless_zero(&obj->refcount)) + obj = NULL; + } + mutex_unlock(&dev->mode_config.idr_mutex); + + return obj; +} + +/** + * drm_mode_object_find - look up a drm object with static lifetime + * @dev: drm device + * @id: id of the mode object + * @type: type of the mode object + * + * This function is used to look up a modeset object. It will acquire a + * reference for reference counted objects. This reference must be dropped again + * by callind drm_mode_object_unreference(). + */ +struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, + uint32_t id, uint32_t type) +{ + struct drm_mode_object *obj = NULL; + + obj = __drm_mode_object_find(dev, id, type); + return obj; +} +EXPORT_SYMBOL(drm_mode_object_find); + +/** + * drm_mode_object_unreference - decr the object refcnt + * @obj: mode_object + * + * This function decrements the object's refcount if it is a refcounted modeset + * object. It is a no-op on any other object. This is used to drop references + * acquired with drm_mode_object_reference(). + */ +void drm_mode_object_unreference(struct drm_mode_object *obj) +{ + if (obj->free_cb) { + DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, atomic_read(&obj->refcount.refcount)); + kref_put(&obj->refcount, obj->free_cb); + } +} +EXPORT_SYMBOL(drm_mode_object_unreference); + +/** + * drm_mode_object_reference - incr the object refcnt + * @obj: mode_object + * + * This function increments the object's refcount if it is a refcounted modeset + * object. It is a no-op on any other object. References should be dropped again + * by calling drm_mode_object_unreference(). + */ +void drm_mode_object_reference(struct drm_mode_object *obj) +{ + if (obj->free_cb) { + DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, atomic_read(&obj->refcount.refcount)); + kref_get(&obj->refcount); + } +} +EXPORT_SYMBOL(drm_mode_object_reference); + +/** + * drm_object_attach_property - attach a property to a modeset object + * @obj: drm modeset object + * @property: property to attach + * @init_val: initial value of the property + * + * This attaches the given property to the modeset object with the given initial + * value. Currently this function cannot fail since the properties are stored in + * a statically sized array. + */ +void drm_object_attach_property(struct drm_mode_object *obj, + struct drm_property *property, + uint64_t init_val) +{ + int count = obj->properties->count; + + if (count == DRM_OBJECT_MAX_PROPERTY) { + WARN(1, "Failed to attach object property (type: 0x%x). Please " + "increase DRM_OBJECT_MAX_PROPERTY by 1 for each time " + "you see this message on the same object type.\n", + obj->type); + return; + } + + obj->properties->properties[count] = property; + obj->properties->values[count] = init_val; + obj->properties->count++; +} +EXPORT_SYMBOL(drm_object_attach_property); + +/** + * drm_object_property_set_value - set the value of a property + * @obj: drm mode object to set property value for + * @property: property to set + * @val: value the property should be set to + * + * This function sets a given property on a given object. This function only + * changes the software state of the property, it does not call into the + * driver's ->set_property callback. + * + * Note that atomic drivers should not have any need to call this, the core will + * ensure consistency of values reported back to userspace through the + * appropriate ->atomic_get_property callback. Only legacy drivers should call + * this function to update the tracked value (after clamping and other + * restrictions have been applied). + * + * Returns: + * Zero on success, error code on failure. + */ +int drm_object_property_set_value(struct drm_mode_object *obj, + struct drm_property *property, uint64_t val) +{ + int i; + + for (i = 0; i < obj->properties->count; i++) { + if (obj->properties->properties[i] == property) { + obj->properties->values[i] = val; + return 0; + } + } + + return -EINVAL; +} +EXPORT_SYMBOL(drm_object_property_set_value); + +/** + * drm_object_property_get_value - retrieve the value of a property + * @obj: drm mode object to get property value from + * @property: property to retrieve + * @val: storage for the property value + * + * This function retrieves the softare state of the given property for the given + * property. Since there is no driver callback to retrieve the current property + * value this might be out of sync with the hardware, depending upon the driver + * and property. + * + * Atomic drivers should never call this function directly, the core will read + * out property values through the various ->atomic_get_property callbacks. + * + * Returns: + * Zero on success, error code on failure. + */ +int drm_object_property_get_value(struct drm_mode_object *obj, + struct drm_property *property, uint64_t *val) +{ + int i; + + /* read-only properties bypass atomic mechanism and still store + * their value in obj->properties->values[].. mostly to avoid + * having to deal w/ EDID and similar props in atomic paths: + */ + if (drm_core_check_feature(property->dev, DRIVER_ATOMIC) && + !(property->flags & DRM_MODE_PROP_IMMUTABLE)) + return drm_atomic_get_property(obj, property, val); + + for (i = 0; i < obj->properties->count; i++) { + if (obj->properties->properties[i] == property) { + *val = obj->properties->values[i]; + return 0; + } + + } + + return -EINVAL; +} +EXPORT_SYMBOL(drm_object_property_get_value); + +/* helper for getconnector and getproperties ioctls */ +int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic, + uint32_t __user *prop_ptr, + uint64_t __user *prop_values, + uint32_t *arg_count_props) +{ + int i, ret, count; + + for (i = 0, count = 0; i < obj->properties->count; i++) { + struct drm_property *prop = obj->properties->properties[i]; + uint64_t val; + + if ((prop->flags & DRM_MODE_PROP_ATOMIC) && !atomic) + continue; + + if (*arg_count_props > count) { + ret = drm_object_property_get_value(obj, prop, &val); + if (ret) + return ret; + + if (put_user(prop->base.id, prop_ptr + count)) + return -EFAULT; + + if (put_user(val, prop_values + count)) + return -EFAULT; + } + + count++; + } + *arg_count_props = count; + + return 0; +} + +/** + * drm_mode_obj_get_properties_ioctl - get the current value of a object's property + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * This function retrieves the current value for an object's property. Compared + * to the connector specific ioctl this one is extended to also work on crtc and + * plane objects. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_mode_obj_get_properties *arg = data; + struct drm_mode_object *obj; + int ret = 0; + + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + return -EINVAL; + + drm_modeset_lock_all(dev); + + obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type); + if (!obj) { + ret = -ENOENT; + goto out; + } + if (!obj->properties) { + ret = -EINVAL; + goto out_unref; + } + + ret = drm_mode_object_get_properties(obj, file_priv->atomic, + (uint32_t __user *)(unsigned long)(arg->props_ptr), + (uint64_t __user *)(unsigned long)(arg->prop_values_ptr), + &arg->count_props); + +out_unref: + drm_mode_object_unreference(obj); +out: + drm_modeset_unlock_all(dev); + return ret; +} + +int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_mode_obj_set_property *arg = data; + struct drm_mode_object *arg_obj; + struct drm_mode_object *prop_obj; + struct drm_property *property; + int i, ret = -EINVAL; + struct drm_mode_object *ref; + + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + return -EINVAL; + + drm_modeset_lock_all(dev); + + arg_obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type); + if (!arg_obj) { + ret = -ENOENT; + goto out; + } + if (!arg_obj->properties) + goto out_unref; + + for (i = 0; i < arg_obj->properties->count; i++) + if (arg_obj->properties->properties[i]->base.id == arg->prop_id) + break; + + if (i == arg_obj->properties->count) + goto out_unref; + + prop_obj = drm_mode_object_find(dev, arg->prop_id, + DRM_MODE_OBJECT_PROPERTY); + if (!prop_obj) { + ret = -ENOENT; + goto out_unref; + } + property = obj_to_property(prop_obj); + + if (!drm_property_change_valid_get(property, arg->value, &ref)) + goto out_unref; + + switch (arg_obj->type) { + case DRM_MODE_OBJECT_CONNECTOR: + ret = drm_mode_connector_set_obj_prop(arg_obj, property, + arg->value); + break; + case DRM_MODE_OBJECT_CRTC: + ret = drm_mode_crtc_set_obj_prop(arg_obj, property, arg->value); + break; + case DRM_MODE_OBJECT_PLANE: + ret = drm_mode_plane_set_obj_prop(obj_to_plane(arg_obj), + property, arg->value); + break; + } + + drm_property_change_valid_put(property, ref); + +out_unref: + drm_mode_object_unreference(arg_obj); +out: + drm_modeset_unlock_all(dev); + return ret; +} diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index a0df377d7d1c..f6b64d7d3528 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -129,6 +129,7 @@ void drm_kms_helper_poll_enable_locked(struct drm_device *dev) { bool poll = false; struct drm_connector *connector; + unsigned long delay = DRM_OUTPUT_POLL_PERIOD; WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); @@ -141,8 +142,13 @@ void drm_kms_helper_poll_enable_locked(struct drm_device *dev) poll = true; } + if (dev->mode_config.delayed_event) { + poll = true; + delay = 0; + } + if (poll) - schedule_delayed_work(&dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD); + schedule_delayed_work(&dev->mode_config.output_poll_work, delay); } EXPORT_SYMBOL(drm_kms_helper_poll_enable_locked); diff --git a/drivers/gpu/drm/drm_property.c b/drivers/gpu/drm/drm_property.c new file mode 100644 index 000000000000..4139afbcc267 --- /dev/null +++ b/drivers/gpu/drm/drm_property.c @@ -0,0 +1,899 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include <linux/export.h> +#include <drm/drmP.h> +#include <drm/drm_property.h> + +#include "drm_crtc_internal.h" + +/** + * DOC: overview + * + * Properties as represented by &drm_property are used to extend the modeset + * interface exposed to userspace. For the atomic modeset IOCTL properties are + * even the only way to transport metadata about the desired new modeset + * configuration from userspace to the kernel. Properties have a well-defined + * value range, which is enforced by the drm core. See the documentation of the + * flags member of struct &drm_property for an overview of the different + * property types and ranges. + * + * Properties don't store the current value directly, but need to be + * instatiated by attaching them to a &drm_mode_object with + * drm_object_attach_property(). + * + * Property values are only 64bit. To support bigger piles of data (like gamma + * tables, color correction matrizes or large structures) a property can instead + * point at a &drm_property_blob with that additional data + * + * Properties are defined by their symbolic name, userspace must keep a + * per-object mapping from those names to the property ID used in the atomic + * IOCTL and in the get/set property IOCTL. + */ + +static bool drm_property_type_valid(struct drm_property *property) +{ + if (property->flags & DRM_MODE_PROP_EXTENDED_TYPE) + return !(property->flags & DRM_MODE_PROP_LEGACY_TYPE); + return !!(property->flags & DRM_MODE_PROP_LEGACY_TYPE); +} + +/** + * drm_property_create - create a new property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * @num_values: number of pre-defined values + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy(), which is done automatically when calling + * drm_mode_config_cleanup(). + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ +struct drm_property *drm_property_create(struct drm_device *dev, int flags, + const char *name, int num_values) +{ + struct drm_property *property = NULL; + int ret; + + property = kzalloc(sizeof(struct drm_property), GFP_KERNEL); + if (!property) + return NULL; + + property->dev = dev; + + if (num_values) { + property->values = kcalloc(num_values, sizeof(uint64_t), + GFP_KERNEL); + if (!property->values) + goto fail; + } + + ret = drm_mode_object_get(dev, &property->base, DRM_MODE_OBJECT_PROPERTY); + if (ret) + goto fail; + + property->flags = flags; + property->num_values = num_values; + INIT_LIST_HEAD(&property->enum_list); + + if (name) { + strncpy(property->name, name, DRM_PROP_NAME_LEN); + property->name[DRM_PROP_NAME_LEN-1] = '\0'; + } + + list_add_tail(&property->head, &dev->mode_config.property_list); + + WARN_ON(!drm_property_type_valid(property)); + + return property; +fail: + kfree(property->values); + kfree(property); + return NULL; +} +EXPORT_SYMBOL(drm_property_create); + +/** + * drm_property_create_enum - create a new enumeration property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * @props: enumeration lists with property values + * @num_values: number of pre-defined values + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy(), which is done automatically when calling + * drm_mode_config_cleanup(). + * + * Userspace is only allowed to set one of the predefined values for enumeration + * properties. + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ +struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags, + const char *name, + const struct drm_prop_enum_list *props, + int num_values) +{ + struct drm_property *property; + int i, ret; + + flags |= DRM_MODE_PROP_ENUM; + + property = drm_property_create(dev, flags, name, num_values); + if (!property) + return NULL; + + for (i = 0; i < num_values; i++) { + ret = drm_property_add_enum(property, i, + props[i].type, + props[i].name); + if (ret) { + drm_property_destroy(dev, property); + return NULL; + } + } + + return property; +} +EXPORT_SYMBOL(drm_property_create_enum); + +/** + * drm_property_create_bitmask - create a new bitmask property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * @props: enumeration lists with property bitflags + * @num_props: size of the @props array + * @supported_bits: bitmask of all supported enumeration values + * + * This creates a new bitmask drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy(), which is done automatically when calling + * drm_mode_config_cleanup(). + * + * Compared to plain enumeration properties userspace is allowed to set any + * or'ed together combination of the predefined property bitflag values + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ +struct drm_property *drm_property_create_bitmask(struct drm_device *dev, + int flags, const char *name, + const struct drm_prop_enum_list *props, + int num_props, + uint64_t supported_bits) +{ + struct drm_property *property; + int i, ret, index = 0; + int num_values = hweight64(supported_bits); + + flags |= DRM_MODE_PROP_BITMASK; + + property = drm_property_create(dev, flags, name, num_values); + if (!property) + return NULL; + for (i = 0; i < num_props; i++) { + if (!(supported_bits & (1ULL << props[i].type))) + continue; + + if (WARN_ON(index >= num_values)) { + drm_property_destroy(dev, property); + return NULL; + } + + ret = drm_property_add_enum(property, index++, + props[i].type, + props[i].name); + if (ret) { + drm_property_destroy(dev, property); + return NULL; + } + } + + return property; +} +EXPORT_SYMBOL(drm_property_create_bitmask); + +static struct drm_property *property_create_range(struct drm_device *dev, + int flags, const char *name, + uint64_t min, uint64_t max) +{ + struct drm_property *property; + + property = drm_property_create(dev, flags, name, 2); + if (!property) + return NULL; + + property->values[0] = min; + property->values[1] = max; + + return property; +} + +/** + * drm_property_create_range - create a new unsigned ranged property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * @min: minimum value of the property + * @max: maximum value of the property + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy(), which is done automatically when calling + * drm_mode_config_cleanup(). + * + * Userspace is allowed to set any unsigned integer value in the (min, max) + * range inclusive. + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ +struct drm_property *drm_property_create_range(struct drm_device *dev, int flags, + const char *name, + uint64_t min, uint64_t max) +{ + return property_create_range(dev, DRM_MODE_PROP_RANGE | flags, + name, min, max); +} +EXPORT_SYMBOL(drm_property_create_range); + +/** + * drm_property_create_signed_range - create a new signed ranged property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * @min: minimum value of the property + * @max: maximum value of the property + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy(), which is done automatically when calling + * drm_mode_config_cleanup(). + * + * Userspace is allowed to set any signed integer value in the (min, max) + * range inclusive. + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ +struct drm_property *drm_property_create_signed_range(struct drm_device *dev, + int flags, const char *name, + int64_t min, int64_t max) +{ + return property_create_range(dev, DRM_MODE_PROP_SIGNED_RANGE | flags, + name, I642U64(min), I642U64(max)); +} +EXPORT_SYMBOL(drm_property_create_signed_range); + +/** + * drm_property_create_object - create a new object property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * @type: object type from DRM_MODE_OBJECT_* defines + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy(), which is done automatically when calling + * drm_mode_config_cleanup(). + * + * Userspace is only allowed to set this to any property value of the given + * @type. Only useful for atomic properties, which is enforced. + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ +struct drm_property *drm_property_create_object(struct drm_device *dev, + int flags, const char *name, + uint32_t type) +{ + struct drm_property *property; + + flags |= DRM_MODE_PROP_OBJECT; + + if (WARN_ON(!(flags & DRM_MODE_PROP_ATOMIC))) + return NULL; + + property = drm_property_create(dev, flags, name, 1); + if (!property) + return NULL; + + property->values[0] = type; + + return property; +} +EXPORT_SYMBOL(drm_property_create_object); + +/** + * drm_property_create_bool - create a new boolean property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy(), which is done automatically when calling + * drm_mode_config_cleanup(). + * + * This is implemented as a ranged property with only {0, 1} as valid values. + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ +struct drm_property *drm_property_create_bool(struct drm_device *dev, int flags, + const char *name) +{ + return drm_property_create_range(dev, flags, name, 0, 1); +} +EXPORT_SYMBOL(drm_property_create_bool); + +/** + * drm_property_add_enum - add a possible value to an enumeration property + * @property: enumeration property to change + * @index: index of the new enumeration + * @value: value of the new enumeration + * @name: symbolic name of the new enumeration + * + * This functions adds enumerations to a property. + * + * It's use is deprecated, drivers should use one of the more specific helpers + * to directly create the property with all enumerations already attached. + * + * Returns: + * Zero on success, error code on failure. + */ +int drm_property_add_enum(struct drm_property *property, int index, + uint64_t value, const char *name) +{ + struct drm_property_enum *prop_enum; + + if (!(drm_property_type_is(property, DRM_MODE_PROP_ENUM) || + drm_property_type_is(property, DRM_MODE_PROP_BITMASK))) + return -EINVAL; + + /* + * Bitmask enum properties have the additional constraint of values + * from 0 to 63 + */ + if (drm_property_type_is(property, DRM_MODE_PROP_BITMASK) && + (value > 63)) + return -EINVAL; + + if (!list_empty(&property->enum_list)) { + list_for_each_entry(prop_enum, &property->enum_list, head) { + if (prop_enum->value == value) { + strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN); + prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0'; + return 0; + } + } + } + + prop_enum = kzalloc(sizeof(struct drm_property_enum), GFP_KERNEL); + if (!prop_enum) + return -ENOMEM; + + strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN); + prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0'; + prop_enum->value = value; + + property->values[index] = value; + list_add_tail(&prop_enum->head, &property->enum_list); + return 0; +} +EXPORT_SYMBOL(drm_property_add_enum); + +/** + * drm_property_destroy - destroy a drm property + * @dev: drm device + * @property: property to destry + * + * This function frees a property including any attached resources like + * enumeration values. + */ +void drm_property_destroy(struct drm_device *dev, struct drm_property *property) +{ + struct drm_property_enum *prop_enum, *pt; + + list_for_each_entry_safe(prop_enum, pt, &property->enum_list, head) { + list_del(&prop_enum->head); + kfree(prop_enum); + } + + if (property->num_values) + kfree(property->values); + drm_mode_object_unregister(dev, &property->base); + list_del(&property->head); + kfree(property); +} +EXPORT_SYMBOL(drm_property_destroy); + +int drm_mode_getproperty_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_get_property *out_resp = data; + struct drm_property *property; + int enum_count = 0; + int value_count = 0; + int ret = 0, i; + int copied; + struct drm_property_enum *prop_enum; + struct drm_mode_property_enum __user *enum_ptr; + uint64_t __user *values_ptr; + + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + return -EINVAL; + + drm_modeset_lock_all(dev); + property = drm_property_find(dev, out_resp->prop_id); + if (!property) { + ret = -ENOENT; + goto done; + } + + if (drm_property_type_is(property, DRM_MODE_PROP_ENUM) || + drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) { + list_for_each_entry(prop_enum, &property->enum_list, head) + enum_count++; + } + + value_count = property->num_values; + + strncpy(out_resp->name, property->name, DRM_PROP_NAME_LEN); + out_resp->name[DRM_PROP_NAME_LEN-1] = 0; + out_resp->flags = property->flags; + + if ((out_resp->count_values >= value_count) && value_count) { + values_ptr = (uint64_t __user *)(unsigned long)out_resp->values_ptr; + for (i = 0; i < value_count; i++) { + if (copy_to_user(values_ptr + i, &property->values[i], sizeof(uint64_t))) { + ret = -EFAULT; + goto done; + } + } + } + out_resp->count_values = value_count; + + if (drm_property_type_is(property, DRM_MODE_PROP_ENUM) || + drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) { + if ((out_resp->count_enum_blobs >= enum_count) && enum_count) { + copied = 0; + enum_ptr = (struct drm_mode_property_enum __user *)(unsigned long)out_resp->enum_blob_ptr; + list_for_each_entry(prop_enum, &property->enum_list, head) { + + if (copy_to_user(&enum_ptr[copied].value, &prop_enum->value, sizeof(uint64_t))) { + ret = -EFAULT; + goto done; + } + + if (copy_to_user(&enum_ptr[copied].name, + &prop_enum->name, DRM_PROP_NAME_LEN)) { + ret = -EFAULT; + goto done; + } + copied++; + } + } + out_resp->count_enum_blobs = enum_count; + } + + /* + * NOTE: The idea seems to have been to use this to read all the blob + * property values. But nothing ever added them to the corresponding + * list, userspace always used the special-purpose get_blob ioctl to + * read the value for a blob property. It also doesn't make a lot of + * sense to return values here when everything else is just metadata for + * the property itself. + */ + if (drm_property_type_is(property, DRM_MODE_PROP_BLOB)) + out_resp->count_enum_blobs = 0; +done: + drm_modeset_unlock_all(dev); + return ret; +} + +static void drm_property_free_blob(struct kref *kref) +{ + struct drm_property_blob *blob = + container_of(kref, struct drm_property_blob, base.refcount); + + mutex_lock(&blob->dev->mode_config.blob_lock); + list_del(&blob->head_global); + mutex_unlock(&blob->dev->mode_config.blob_lock); + + drm_mode_object_unregister(blob->dev, &blob->base); + + kfree(blob); +} + +/** + * drm_property_create_blob - Create new blob property + * @dev: DRM device to create property for + * @length: Length to allocate for blob data + * @data: If specified, copies data into blob + * + * Creates a new blob property for a specified DRM device, optionally + * copying data. Note that blob properties are meant to be invariant, hence the + * data must be filled out before the blob is used as the value of any property. + * + * Returns: + * New blob property with a single reference on success, or an ERR_PTR + * value on failure. + */ +struct drm_property_blob * +drm_property_create_blob(struct drm_device *dev, size_t length, + const void *data) +{ + struct drm_property_blob *blob; + int ret; + + if (!length || length > ULONG_MAX - sizeof(struct drm_property_blob)) + return ERR_PTR(-EINVAL); + + blob = kzalloc(sizeof(struct drm_property_blob)+length, GFP_KERNEL); + if (!blob) + return ERR_PTR(-ENOMEM); + + /* This must be explicitly initialised, so we can safely call list_del + * on it in the removal handler, even if it isn't in a file list. */ + INIT_LIST_HEAD(&blob->head_file); + blob->length = length; + blob->dev = dev; + + if (data) + memcpy(blob->data, data, length); + + ret = drm_mode_object_get_reg(dev, &blob->base, DRM_MODE_OBJECT_BLOB, + true, drm_property_free_blob); + if (ret) { + kfree(blob); + return ERR_PTR(-EINVAL); + } + + mutex_lock(&dev->mode_config.blob_lock); + list_add_tail(&blob->head_global, + &dev->mode_config.property_blob_list); + mutex_unlock(&dev->mode_config.blob_lock); + + return blob; +} +EXPORT_SYMBOL(drm_property_create_blob); + +/** + * drm_property_unreference_blob - Unreference a blob property + * @blob: Pointer to blob property + * + * Drop a reference on a blob property. May free the object. + */ +void drm_property_unreference_blob(struct drm_property_blob *blob) +{ + if (!blob) + return; + + drm_mode_object_unreference(&blob->base); +} +EXPORT_SYMBOL(drm_property_unreference_blob); + +void drm_property_destroy_user_blobs(struct drm_device *dev, + struct drm_file *file_priv) +{ + struct drm_property_blob *blob, *bt; + + /* + * When the file gets released that means no one else can access the + * blob list any more, so no need to grab dev->blob_lock. + */ + list_for_each_entry_safe(blob, bt, &file_priv->blobs, head_file) { + list_del_init(&blob->head_file); + drm_property_unreference_blob(blob); + } +} + +/** + * drm_property_reference_blob - Take a reference on an existing property + * @blob: Pointer to blob property + * + * Take a new reference on an existing blob property. Returns @blob, which + * allows this to be used as a shorthand in assignments. + */ +struct drm_property_blob *drm_property_reference_blob(struct drm_property_blob *blob) +{ + drm_mode_object_reference(&blob->base); + return blob; +} +EXPORT_SYMBOL(drm_property_reference_blob); + +/** + * drm_property_lookup_blob - look up a blob property and take a reference + * @dev: drm device + * @id: id of the blob property + * + * If successful, this takes an additional reference to the blob property. + * callers need to make sure to eventually unreference the returned property + * again, using @drm_property_unreference_blob. + * + * Return: + * NULL on failure, pointer to the blob on success. + */ +struct drm_property_blob *drm_property_lookup_blob(struct drm_device *dev, + uint32_t id) +{ + struct drm_mode_object *obj; + struct drm_property_blob *blob = NULL; + + obj = __drm_mode_object_find(dev, id, DRM_MODE_OBJECT_BLOB); + if (obj) + blob = obj_to_blob(obj); + return blob; +} +EXPORT_SYMBOL(drm_property_lookup_blob); + +/** + * drm_property_replace_global_blob - replace existing blob property + * @dev: drm device + * @replace: location of blob property pointer to be replaced + * @length: length of data for new blob, or 0 for no data + * @data: content for new blob, or NULL for no data + * @obj_holds_id: optional object for property holding blob ID + * @prop_holds_id: optional property holding blob ID + * @return 0 on success or error on failure + * + * This function will replace a global property in the blob list, optionally + * updating a property which holds the ID of that property. + * + * If length is 0 or data is NULL, no new blob will be created, and the holding + * property, if specified, will be set to 0. + * + * Access to the replace pointer is assumed to be protected by the caller, e.g. + * by holding the relevant modesetting object lock for its parent. + * + * For example, a drm_connector has a 'PATH' property, which contains the ID + * of a blob property with the value of the MST path information. Calling this + * function with replace pointing to the connector's path_blob_ptr, length and + * data set for the new path information, obj_holds_id set to the connector's + * base object, and prop_holds_id set to the path property name, will perform + * a completely atomic update. The access to path_blob_ptr is protected by the + * caller holding a lock on the connector. + */ +int drm_property_replace_global_blob(struct drm_device *dev, + struct drm_property_blob **replace, + size_t length, + const void *data, + struct drm_mode_object *obj_holds_id, + struct drm_property *prop_holds_id) +{ + struct drm_property_blob *new_blob = NULL; + struct drm_property_blob *old_blob = NULL; + int ret; + + WARN_ON(replace == NULL); + + old_blob = *replace; + + if (length && data) { + new_blob = drm_property_create_blob(dev, length, data); + if (IS_ERR(new_blob)) + return PTR_ERR(new_blob); + } + + if (obj_holds_id) { + ret = drm_object_property_set_value(obj_holds_id, + prop_holds_id, + new_blob ? + new_blob->base.id : 0); + if (ret != 0) + goto err_created; + } + + drm_property_unreference_blob(old_blob); + *replace = new_blob; + + return 0; + +err_created: + drm_property_unreference_blob(new_blob); + return ret; +} +EXPORT_SYMBOL(drm_property_replace_global_blob); + +int drm_mode_getblob_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_get_blob *out_resp = data; + struct drm_property_blob *blob; + int ret = 0; + void __user *blob_ptr; + + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + return -EINVAL; + + blob = drm_property_lookup_blob(dev, out_resp->blob_id); + if (!blob) + return -ENOENT; + + if (out_resp->length == blob->length) { + blob_ptr = (void __user *)(unsigned long)out_resp->data; + if (copy_to_user(blob_ptr, blob->data, blob->length)) { + ret = -EFAULT; + goto unref; + } + } + out_resp->length = blob->length; +unref: + drm_property_unreference_blob(blob); + + return ret; +} + +int drm_mode_createblob_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_create_blob *out_resp = data; + struct drm_property_blob *blob; + void __user *blob_ptr; + int ret = 0; + + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + return -EINVAL; + + blob = drm_property_create_blob(dev, out_resp->length, NULL); + if (IS_ERR(blob)) + return PTR_ERR(blob); + + blob_ptr = (void __user *)(unsigned long)out_resp->data; + if (copy_from_user(blob->data, blob_ptr, out_resp->length)) { + ret = -EFAULT; + goto out_blob; + } + + /* Dropping the lock between create_blob and our access here is safe + * as only the same file_priv can remove the blob; at this point, it is + * not associated with any file_priv. */ + mutex_lock(&dev->mode_config.blob_lock); + out_resp->blob_id = blob->base.id; + list_add_tail(&blob->head_file, &file_priv->blobs); + mutex_unlock(&dev->mode_config.blob_lock); + + return 0; + +out_blob: + drm_property_unreference_blob(blob); + return ret; +} + +int drm_mode_destroyblob_ioctl(struct drm_device *dev, + void *data, struct drm_file *file_priv) +{ + struct drm_mode_destroy_blob *out_resp = data; + struct drm_property_blob *blob = NULL, *bt; + bool found = false; + int ret = 0; + + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + return -EINVAL; + + blob = drm_property_lookup_blob(dev, out_resp->blob_id); + if (!blob) + return -ENOENT; + + mutex_lock(&dev->mode_config.blob_lock); + /* Ensure the property was actually created by this user. */ + list_for_each_entry(bt, &file_priv->blobs, head_file) { + if (bt == blob) { + found = true; + break; + } + } + + if (!found) { + ret = -EPERM; + goto err; + } + + /* We must drop head_file here, because we may not be the last + * reference on the blob. */ + list_del_init(&blob->head_file); + mutex_unlock(&dev->mode_config.blob_lock); + + /* One reference from lookup, and one from the filp. */ + drm_property_unreference_blob(blob); + drm_property_unreference_blob(blob); + + return 0; + +err: + mutex_unlock(&dev->mode_config.blob_lock); + drm_property_unreference_blob(blob); + + return ret; +} + +/* Some properties could refer to dynamic refcnt'd objects, or things that + * need special locking to handle lifetime issues (ie. to ensure the prop + * value doesn't become invalid part way through the property update due to + * race). The value returned by reference via 'obj' should be passed back + * to drm_property_change_valid_put() after the property is set (and the + * object to which the property is attached has a chance to take it's own + * reference). + */ +bool drm_property_change_valid_get(struct drm_property *property, + uint64_t value, struct drm_mode_object **ref) +{ + int i; + + if (property->flags & DRM_MODE_PROP_IMMUTABLE) + return false; + + *ref = NULL; + + if (drm_property_type_is(property, DRM_MODE_PROP_RANGE)) { + if (value < property->values[0] || value > property->values[1]) + return false; + return true; + } else if (drm_property_type_is(property, DRM_MODE_PROP_SIGNED_RANGE)) { + int64_t svalue = U642I64(value); + + if (svalue < U642I64(property->values[0]) || + svalue > U642I64(property->values[1])) + return false; + return true; + } else if (drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) { + uint64_t valid_mask = 0; + + for (i = 0; i < property->num_values; i++) + valid_mask |= (1ULL << property->values[i]); + return !(value & ~valid_mask); + } else if (drm_property_type_is(property, DRM_MODE_PROP_BLOB) || + drm_property_type_is(property, DRM_MODE_PROP_OBJECT)) { + /* a zero value for an object property translates to null: */ + if (value == 0) + return true; + + *ref = __drm_mode_object_find(property->dev, value, + property->values[0]); + return *ref != NULL; + } + + for (i = 0; i < property->num_values; i++) + if (property->values[i] == value) + return true; + return false; +} + +void drm_property_change_valid_put(struct drm_property *property, + struct drm_mode_object *ref) +{ + if (!ref) + return; + + if (drm_property_type_is(property, DRM_MODE_PROP_OBJECT) || + drm_property_type_is(property, DRM_MODE_PROP_BLOB)) + drm_mode_object_unreference(ref); +} diff --git a/drivers/gpu/drm/drm_simple_kms_helper.c b/drivers/gpu/drm/drm_simple_kms_helper.c index bada17166512..7b6d26e64977 100644 --- a/drivers/gpu/drm/drm_simple_kms_helper.c +++ b/drivers/gpu/drm/drm_simple_kms_helper.c @@ -34,6 +34,12 @@ static const struct drm_encoder_funcs drm_simple_kms_encoder_funcs = { .destroy = drm_encoder_cleanup, }; +static int drm_simple_kms_crtc_check(struct drm_crtc *crtc, + struct drm_crtc_state *state) +{ + return drm_atomic_add_affected_planes(state->state, crtc); +} + static void drm_simple_kms_crtc_enable(struct drm_crtc *crtc) { struct drm_simple_display_pipe *pipe; @@ -57,6 +63,7 @@ static void drm_simple_kms_crtc_disable(struct drm_crtc *crtc) } static const struct drm_crtc_helper_funcs drm_simple_kms_crtc_helper_funcs = { + .atomic_check = drm_simple_kms_crtc_check, .disable = drm_simple_kms_crtc_disable, .enable = drm_simple_kms_crtc_enable, }; @@ -133,16 +140,61 @@ static const struct drm_plane_funcs drm_simple_kms_plane_funcs = { }; /** + * drm_simple_display_pipe_attach_bridge - Attach a bridge to the display pipe + * @pipe: simple display pipe object + * @bridge: bridge to attach + * + * Makes it possible to still use the drm_simple_display_pipe helpers when + * a DRM bridge has to be used. + * + * Note that you probably want to initialize the pipe by passing a NULL + * connector to drm_simple_display_pipe_init(). + * + * Returns: + * Zero on success, negative error code on failure. + */ +int drm_simple_display_pipe_attach_bridge(struct drm_simple_display_pipe *pipe, + struct drm_bridge *bridge) +{ + bridge->encoder = &pipe->encoder; + pipe->encoder.bridge = bridge; + return drm_bridge_attach(pipe->encoder.dev, bridge); +} +EXPORT_SYMBOL(drm_simple_display_pipe_attach_bridge); + +/** + * drm_simple_display_pipe_detach_bridge - Detach the bridge from the display pipe + * @pipe: simple display pipe object + * + * Detaches the drm bridge previously attached with + * drm_simple_display_pipe_attach_bridge() + */ +void drm_simple_display_pipe_detach_bridge(struct drm_simple_display_pipe *pipe) +{ + if (WARN_ON(!pipe->encoder.bridge)) + return; + + drm_bridge_detach(pipe->encoder.bridge); + pipe->encoder.bridge = NULL; +} +EXPORT_SYMBOL(drm_simple_display_pipe_detach_bridge); + +/** * drm_simple_display_pipe_init - Initialize a simple display pipeline * @dev: DRM device * @pipe: simple display pipe object to initialize * @funcs: callbacks for the display pipe (optional) * @formats: array of supported formats (DRM_FORMAT\_\*) * @format_count: number of elements in @formats - * @connector: connector to attach and register + * @connector: connector to attach and register (optional) * * Sets up a display pipeline which consist of a really simple - * plane-crtc-encoder pipe coupled with the provided connector. + * plane-crtc-encoder pipe. + * + * If a connector is supplied, the pipe will be coupled with the provided + * connector. You may supply a NULL connector when using drm bridges, that + * handle connectors themselves (see drm_simple_display_pipe_attach_bridge()). + * * Teardown of a simple display pipe is all handled automatically by the drm * core through calling drm_mode_config_cleanup(). Drivers afterwards need to * release the memory for the structure themselves. @@ -181,7 +233,7 @@ int drm_simple_display_pipe_init(struct drm_device *dev, encoder->possible_crtcs = 1 << drm_crtc_index(crtc); ret = drm_encoder_init(dev, encoder, &drm_simple_kms_encoder_funcs, DRM_MODE_ENCODER_NONE, NULL); - if (ret) + if (ret || !connector) return ret; return drm_mode_connector_attach_encoder(connector, encoder); diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index 877d2efa28e2..486943e70f70 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -105,7 +105,7 @@ static void exynos_atomic_commit_complete(struct exynos_atomic_commit *commit) atomic_inc(&exynos_crtc->pending_update); } - drm_atomic_helper_commit_planes(dev, state, false); + drm_atomic_helper_commit_planes(dev, state, 0); exynos_atomic_wait_for_commit(state); diff --git a/drivers/gpu/drm/gma500/opregion.c b/drivers/gpu/drm/gma500/opregion.c index ab696ca7eeec..eab6d889bde9 100644 --- a/drivers/gpu/drm/gma500/opregion.c +++ b/drivers/gpu/drm/gma500/opregion.c @@ -163,10 +163,7 @@ static u32 asle_set_backlight(struct drm_device *dev, u32 bclp) if (bclp > 255) return ASLE_BACKLIGHT_FAILED; - if (config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE)) { - int max = bd->props.max_brightness; - gma_backlight_set(dev, bclp * max / 255); - } + gma_backlight_set(dev, bclp * bd->props.max_brightness / 255); asle->cblv = (bclp * 0x64) / 0xff | ASLE_CBLV_VALID; diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c index 438bac8fbc2b..56dfc4cd50c6 100644 --- a/drivers/gpu/drm/imx/imx-drm-core.c +++ b/drivers/gpu/drm/imx/imx-drm-core.c @@ -193,7 +193,8 @@ static void imx_drm_atomic_commit_tail(struct drm_atomic_state *state) drm_atomic_helper_commit_modeset_disables(dev, state); - drm_atomic_helper_commit_planes(dev, state, true); + drm_atomic_helper_commit_planes(dev, state, + DRM_PLANE_COMMIT_ACTIVE_ONLY); drm_atomic_helper_commit_modeset_enables(dev, state); diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c index 0e769abd0c2c..72c1ae4e02d4 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c @@ -70,13 +70,15 @@ static void mtk_atomic_complete(struct mtk_drm_private *private, * * drm_atomic_helper_commit_modeset_disables(dev, state); * drm_atomic_helper_commit_modeset_enables(dev, state); - * drm_atomic_helper_commit_planes(dev, state, true); + * drm_atomic_helper_commit_planes(dev, state, + * DRM_PLANE_COMMIT_ACTIVE_ONLY); * * See the kerneldoc entries for these three functions for more details. */ drm_atomic_helper_commit_modeset_disables(drm, state); drm_atomic_helper_commit_modeset_enables(drm, state); - drm_atomic_helper_commit_planes(drm, state, true); + drm_atomic_helper_commit_planes(drm, state, + DRM_PLANE_COMMIT_ACTIVE_ONLY); drm_atomic_helper_wait_for_vblanks(drm, state); diff --git a/drivers/gpu/drm/msm/msm_atomic.c b/drivers/gpu/drm/msm/msm_atomic.c index 4a8a6f1f1151..5df252cebf1c 100644 --- a/drivers/gpu/drm/msm/msm_atomic.c +++ b/drivers/gpu/drm/msm/msm_atomic.c @@ -118,7 +118,7 @@ static void complete_commit(struct msm_commit *c, bool async) drm_atomic_helper_commit_modeset_disables(dev, state); - drm_atomic_helper_commit_planes(dev, state, false); + drm_atomic_helper_commit_planes(dev, state, 0); drm_atomic_helper_commit_modeset_enables(dev, state); diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c index 3dd78f2045f9..e1cfba51cff6 100644 --- a/drivers/gpu/drm/omapdrm/omap_drv.c +++ b/drivers/gpu/drm/omapdrm/omap_drv.c @@ -96,7 +96,7 @@ static void omap_atomic_complete(struct omap_atomic_state_commit *commit) dispc_runtime_get(); drm_atomic_helper_commit_modeset_disables(dev, old_state); - drm_atomic_helper_commit_planes(dev, old_state, false); + drm_atomic_helper_commit_planes(dev, old_state, 0); drm_atomic_helper_commit_modeset_enables(dev, old_state); omap_atomic_wait_for_completion(dev, old_state); diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c index f03eb55318c1..bd9c3bb9252c 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c @@ -257,7 +257,8 @@ static void rcar_du_atomic_complete(struct rcar_du_commit *commit) /* Apply the atomic update. */ drm_atomic_helper_commit_modeset_disables(dev, old_state); drm_atomic_helper_commit_modeset_enables(dev, old_state); - drm_atomic_helper_commit_planes(dev, old_state, true); + drm_atomic_helper_commit_planes(dev, old_state, + DRM_PLANE_COMMIT_ACTIVE_ONLY); drm_atomic_helper_wait_for_vblanks(dev, old_state); diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c index ba45d9d8bb62..60bcc48f84b9 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c @@ -245,7 +245,8 @@ rockchip_atomic_commit_tail(struct drm_atomic_state *state) drm_atomic_helper_commit_modeset_enables(dev, state); - drm_atomic_helper_commit_planes(dev, state, true); + drm_atomic_helper_commit_planes(dev, state, + DRM_PLANE_COMMIT_ACTIVE_ONLY); drm_atomic_helper_commit_hw_done(state); diff --git a/drivers/gpu/drm/sti/sti_drv.c b/drivers/gpu/drm/sti/sti_drv.c index f8311b2bc84e..7cd3804c6dee 100644 --- a/drivers/gpu/drm/sti/sti_drv.c +++ b/drivers/gpu/drm/sti/sti_drv.c @@ -178,7 +178,7 @@ static void sti_atomic_complete(struct sti_private *private, */ drm_atomic_helper_commit_modeset_disables(drm, state); - drm_atomic_helper_commit_planes(drm, state, false); + drm_atomic_helper_commit_planes(drm, state, 0); drm_atomic_helper_commit_modeset_enables(drm, state); drm_atomic_helper_wait_for_vblanks(drm, state); diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index 755264d9db22..4b9f1c79cd7b 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -57,7 +57,8 @@ static void tegra_atomic_complete(struct tegra_drm *tegra, drm_atomic_helper_commit_modeset_disables(drm, state); drm_atomic_helper_commit_modeset_enables(drm, state); - drm_atomic_helper_commit_planes(drm, state, true); + drm_atomic_helper_commit_planes(drm, state, + DRM_PLANE_COMMIT_ACTIVE_ONLY); drm_atomic_helper_wait_for_vblanks(drm, state); diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index 3404d245d28d..4405e4bc8056 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -118,7 +118,7 @@ static int tilcdc_commit(struct drm_device *dev, drm_atomic_helper_commit_modeset_disables(dev, state); - drm_atomic_helper_commit_planes(dev, state, false); + drm_atomic_helper_commit_planes(dev, state, 0); drm_atomic_helper_commit_modeset_enables(dev, state); diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c index 4ac894d993cd..c1f65c6c8e60 100644 --- a/drivers/gpu/drm/vc4/vc4_kms.c +++ b/drivers/gpu/drm/vc4/vc4_kms.c @@ -44,7 +44,7 @@ vc4_atomic_complete_commit(struct vc4_commit *c) drm_atomic_helper_commit_modeset_disables(dev, state); - drm_atomic_helper_commit_planes(dev, state, false); + drm_atomic_helper_commit_planes(dev, state, 0); drm_atomic_helper_commit_modeset_enables(dev, state); diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c index 4e192aa2d021..7cf3678623c3 100644 --- a/drivers/gpu/drm/virtio/virtgpu_display.c +++ b/drivers/gpu/drm/virtio/virtgpu_display.c @@ -338,7 +338,8 @@ static void vgdev_atomic_commit_tail(struct drm_atomic_state *state) drm_atomic_helper_commit_modeset_disables(dev, state); drm_atomic_helper_commit_modeset_enables(dev, state); - drm_atomic_helper_commit_planes(dev, state, true); + drm_atomic_helper_commit_planes(dev, state, + DRM_PLANE_COMMIT_ACTIVE_ONLY); drm_atomic_helper_commit_hw_done(state); diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index 5a02e499f32b..f86682825d68 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -65,14 +65,19 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, int drm_atomic_helper_prepare_planes(struct drm_device *dev, struct drm_atomic_state *state); + +#define DRM_PLANE_COMMIT_ACTIVE_ONLY BIT(0) +#define DRM_PLANE_COMMIT_NO_DISABLE_AFTER_MODESET BIT(1) + void drm_atomic_helper_commit_planes(struct drm_device *dev, struct drm_atomic_state *state, - bool active_only); + uint32_t flags); void drm_atomic_helper_cleanup_planes(struct drm_device *dev, struct drm_atomic_state *old_state); void drm_atomic_helper_commit_planes_on_crtc(struct drm_crtc_state *old_crtc_state); -void drm_atomic_helper_disable_planes_on_crtc(struct drm_crtc *crtc, - bool atomic); +void +drm_atomic_helper_disable_planes_on_crtc(struct drm_crtc_state *old_crtc_state, + bool atomic); void drm_atomic_helper_swap_state(struct drm_atomic_state *state, bool stall); diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index f1576db6c044..66b7d6744dd2 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -25,7 +25,7 @@ #include <linux/list.h> #include <linux/ctype.h> -#include <drm/drm_modeset.h> +#include <drm/drm_mode_object.h> struct drm_connector_helper_funcs; struct drm_device; diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 7c8a77b181c2..8ca71d66282b 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -36,10 +36,12 @@ #include <uapi/drm/drm_fourcc.h> #include <drm/drm_modeset_lock.h> #include <drm/drm_rect.h> -#include <drm/drm_modeset.h> +#include <drm/drm_mode_object.h> #include <drm/drm_framebuffer.h> #include <drm/drm_modes.h> #include <drm/drm_connector.h> +#include <drm/drm_encoder.h> +#include <drm/drm_property.h> struct drm_device; struct drm_mode_set; @@ -81,33 +83,6 @@ struct drm_tile_group { u8 group_data[8]; }; -struct drm_property_blob { - struct drm_mode_object base; - struct drm_device *dev; - struct list_head head_global; - struct list_head head_file; - size_t length; - unsigned char data[]; -}; - -struct drm_property_enum { - uint64_t value; - struct list_head head; - char name[DRM_PROP_NAME_LEN]; -}; - -struct drm_property { - struct list_head head; - struct drm_mode_object base; - uint32_t flags; - char name[DRM_PROP_NAME_LEN]; - uint32_t num_values; - uint64_t *values; - struct drm_device *dev; - - struct list_head enum_list; -}; - struct drm_crtc; struct drm_encoder; struct drm_pending_vblank_event; @@ -680,97 +655,6 @@ struct drm_crtc { }; /** - * struct drm_encoder_funcs - encoder controls - * - * Encoders sit between CRTCs and connectors. - */ -struct drm_encoder_funcs { - /** - * @reset: - * - * Reset encoder hardware and software state to off. This function isn't - * called by the core directly, only through drm_mode_config_reset(). - * It's not a helper hook only for historical reasons. - */ - void (*reset)(struct drm_encoder *encoder); - - /** - * @destroy: - * - * Clean up encoder resources. This is only called at driver unload time - * through drm_mode_config_cleanup() since an encoder cannot be - * hotplugged in DRM. - */ - void (*destroy)(struct drm_encoder *encoder); - - /** - * @late_register: - * - * This optional hook can be used to register additional userspace - * interfaces attached to the encoder like debugfs interfaces. - * It is called late in the driver load sequence from drm_dev_register(). - * Everything added from this callback should be unregistered in - * the early_unregister callback. - * - * Returns: - * - * 0 on success, or a negative error code on failure. - */ - int (*late_register)(struct drm_encoder *encoder); - - /** - * @early_unregister: - * - * This optional hook should be used to unregister the additional - * userspace interfaces attached to the encoder from - * late_unregister(). It is called from drm_dev_unregister(), - * early in the driver unload sequence to disable userspace access - * before data structures are torndown. - */ - void (*early_unregister)(struct drm_encoder *encoder); -}; - -/** - * struct drm_encoder - central DRM encoder structure - * @dev: parent DRM device - * @head: list management - * @base: base KMS object - * @name: human readable name, can be overwritten by the driver - * @encoder_type: one of the DRM_MODE_ENCODER_<foo> types in drm_mode.h - * @possible_crtcs: bitmask of potential CRTC bindings - * @possible_clones: bitmask of potential sibling encoders for cloning - * @crtc: currently bound CRTC - * @bridge: bridge associated to the encoder - * @funcs: control functions - * @helper_private: mid-layer private data - * - * CRTCs drive pixels to encoders, which convert them into signals - * appropriate for a given connector or set of connectors. - */ -struct drm_encoder { - struct drm_device *dev; - struct list_head head; - - struct drm_mode_object base; - char *name; - int encoder_type; - - /** - * @index: Position inside the mode_config.list, can be used as an array - * index. It is invariant over the lifetime of the encoder. - */ - unsigned index; - - uint32_t possible_crtcs; - uint32_t possible_clones; - - struct drm_crtc *crtc; - struct drm_bridge *bridge; - const struct drm_encoder_funcs *funcs; - const struct drm_encoder_helper_funcs *helper_private; -}; - -/** * struct drm_plane_state - mutable plane state * @plane: backpointer to the plane * @crtc: currently bound CRTC, NULL if disabled @@ -1136,12 +1020,33 @@ struct drm_plane { /** * struct drm_bridge_funcs - drm_bridge control functions - * @attach: Called during drm_bridge_attach */ struct drm_bridge_funcs { + /** + * @attach: + * + * This callback is invoked whenever our bridge is being attached to a + * &drm_encoder. + * + * The attach callback is optional. + * + * RETURNS: + * + * Zero on success, error code on failure. + */ int (*attach)(struct drm_bridge *bridge); /** + * @detach: + * + * This callback is invoked whenever our bridge is being detached from a + * &drm_encoder. + * + * The detach callback is optional. + */ + void (*detach)(struct drm_bridge *bridge); + + /** * @mode_fixup: * * This callback is used to validate and adjust a mode. The paramater @@ -1155,6 +1060,8 @@ struct drm_bridge_funcs { * this function passes all other callbacks must succeed for this * configuration. * + * The mode_fixup callback is optional. + * * NOTE: * * This function is called in the check phase of atomic modesets, which @@ -2109,18 +2016,11 @@ struct drm_mode_config { for_each_if ((encoder_mask) & (1 << drm_encoder_index(encoder))) #define obj_to_crtc(x) container_of(x, struct drm_crtc, base) -#define obj_to_encoder(x) container_of(x, struct drm_encoder, base) #define obj_to_mode(x) container_of(x, struct drm_display_mode, base) #define obj_to_fb(x) container_of(x, struct drm_framebuffer, base) -#define obj_to_property(x) container_of(x, struct drm_property, base) #define obj_to_blob(x) container_of(x, struct drm_property_blob, base) #define obj_to_plane(x) container_of(x, struct drm_plane, base) -struct drm_prop_enum_list { - int type; - char *name; -}; - extern __printf(6, 7) int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, @@ -2154,37 +2054,6 @@ static inline uint32_t drm_crtc_mask(struct drm_crtc *crtc) return 1 << drm_crtc_index(crtc); } -extern __printf(5, 6) -int drm_encoder_init(struct drm_device *dev, - struct drm_encoder *encoder, - const struct drm_encoder_funcs *funcs, - int encoder_type, const char *name, ...); - -/** - * drm_encoder_index - find the index of a registered encoder - * @encoder: encoder to find index for - * - * Given a registered encoder, return the index of that encoder within a DRM - * device's list of encoders. - */ -static inline unsigned int drm_encoder_index(struct drm_encoder *encoder) -{ - return encoder->index; -} - -/** - * drm_encoder_crtc_ok - can a given crtc drive a given encoder? - * @encoder: encoder to test - * @crtc: crtc to test - * - * Return false if @encoder can't be driven by @crtc, true otherwise. - */ -static inline bool drm_encoder_crtc_ok(struct drm_encoder *encoder, - struct drm_crtc *crtc) -{ - return !!(encoder->possible_crtcs & drm_crtc_mask(crtc)); -} - extern __printf(8, 9) int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, @@ -2220,75 +2089,15 @@ extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode, extern int drm_crtc_force_disable(struct drm_crtc *crtc); extern int drm_crtc_force_disable_all(struct drm_device *dev); -extern void drm_encoder_cleanup(struct drm_encoder *encoder); - extern void drm_mode_config_init(struct drm_device *dev); extern void drm_mode_config_reset(struct drm_device *dev); extern void drm_mode_config_cleanup(struct drm_device *dev); -static inline bool drm_property_type_is(struct drm_property *property, - uint32_t type) -{ - /* instanceof for props.. handles extended type vs original types: */ - if (property->flags & DRM_MODE_PROP_EXTENDED_TYPE) - return (property->flags & DRM_MODE_PROP_EXTENDED_TYPE) == type; - return property->flags & type; -} - -extern int drm_object_property_set_value(struct drm_mode_object *obj, - struct drm_property *property, - uint64_t val); -extern int drm_object_property_get_value(struct drm_mode_object *obj, - struct drm_property *property, - uint64_t *value); - -extern void drm_object_attach_property(struct drm_mode_object *obj, - struct drm_property *property, - uint64_t init_val); -extern struct drm_property *drm_property_create(struct drm_device *dev, int flags, - const char *name, int num_values); -extern struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags, - const char *name, - const struct drm_prop_enum_list *props, - int num_values); -struct drm_property *drm_property_create_bitmask(struct drm_device *dev, - int flags, const char *name, - const struct drm_prop_enum_list *props, - int num_props, - uint64_t supported_bits); -struct drm_property *drm_property_create_range(struct drm_device *dev, int flags, - const char *name, - uint64_t min, uint64_t max); -struct drm_property *drm_property_create_signed_range(struct drm_device *dev, - int flags, const char *name, - int64_t min, int64_t max); -struct drm_property *drm_property_create_object(struct drm_device *dev, - int flags, const char *name, uint32_t type); -struct drm_property *drm_property_create_bool(struct drm_device *dev, int flags, - const char *name); -struct drm_property_blob *drm_property_create_blob(struct drm_device *dev, - size_t length, - const void *data); -struct drm_property_blob *drm_property_lookup_blob(struct drm_device *dev, - uint32_t id); -int drm_property_replace_global_blob(struct drm_device *dev, - struct drm_property_blob **replace, - size_t length, - const void *data, - struct drm_mode_object *obj_holds_id, - struct drm_property *prop_holds_id); -struct drm_property_blob *drm_property_reference_blob(struct drm_property_blob *blob); -void drm_property_unreference_blob(struct drm_property_blob *blob); -extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property); -extern int drm_property_add_enum(struct drm_property *property, int index, - uint64_t value, const char *name); extern int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, int gamma_size); extern int drm_mode_set_config_internal(struct drm_mode_set *set); -extern uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth); - extern struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, char topology[8]); extern struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, @@ -2333,22 +2142,6 @@ static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev, return mo ? obj_to_crtc(mo) : NULL; } -static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev, - uint32_t id) -{ - struct drm_mode_object *mo; - mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER); - return mo ? obj_to_encoder(mo) : NULL; -} - -static inline struct drm_property *drm_property_find(struct drm_device *dev, - uint32_t id) -{ - struct drm_mode_object *mo; - mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_PROPERTY); - return mo ? obj_to_property(mo) : NULL; -} - /* * Extract a degamma/gamma LUT value provided by user and round it to the * precision supported by the hardware. @@ -2444,6 +2237,7 @@ extern int drm_bridge_add(struct drm_bridge *bridge); extern void drm_bridge_remove(struct drm_bridge *bridge); extern struct drm_bridge *of_drm_find_bridge(struct device_node *np); extern int drm_bridge_attach(struct drm_device *dev, struct drm_bridge *bridge); +extern void drm_bridge_detach(struct drm_bridge *bridge); bool drm_bridge_mode_fixup(struct drm_bridge *bridge, const struct drm_display_mode *mode, diff --git a/include/drm/drm_encoder.h b/include/drm/drm_encoder.h new file mode 100644 index 000000000000..fce0203094f7 --- /dev/null +++ b/include/drm/drm_encoder.h @@ -0,0 +1,227 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef __DRM_ENCODER_H__ +#define __DRM_ENCODER_H__ + +#include <linux/list.h> +#include <linux/ctype.h> +#include <drm/drm_mode_object.h> + +/** + * struct drm_encoder_funcs - encoder controls + * + * Encoders sit between CRTCs and connectors. + */ +struct drm_encoder_funcs { + /** + * @reset: + * + * Reset encoder hardware and software state to off. This function isn't + * called by the core directly, only through drm_mode_config_reset(). + * It's not a helper hook only for historical reasons. + */ + void (*reset)(struct drm_encoder *encoder); + + /** + * @destroy: + * + * Clean up encoder resources. This is only called at driver unload time + * through drm_mode_config_cleanup() since an encoder cannot be + * hotplugged in DRM. + */ + void (*destroy)(struct drm_encoder *encoder); + + /** + * @late_register: + * + * This optional hook can be used to register additional userspace + * interfaces attached to the encoder like debugfs interfaces. + * It is called late in the driver load sequence from drm_dev_register(). + * Everything added from this callback should be unregistered in + * the early_unregister callback. + * + * Returns: + * + * 0 on success, or a negative error code on failure. + */ + int (*late_register)(struct drm_encoder *encoder); + + /** + * @early_unregister: + * + * This optional hook should be used to unregister the additional + * userspace interfaces attached to the encoder from + * late_unregister(). It is called from drm_dev_unregister(), + * early in the driver unload sequence to disable userspace access + * before data structures are torndown. + */ + void (*early_unregister)(struct drm_encoder *encoder); +}; + +/** + * struct drm_encoder - central DRM encoder structure + * @dev: parent DRM device + * @head: list management + * @base: base KMS object + * @name: human readable name, can be overwritten by the driver + * @crtc: currently bound CRTC + * @bridge: bridge associated to the encoder + * @funcs: control functions + * @helper_private: mid-layer private data + * + * CRTCs drive pixels to encoders, which convert them into signals + * appropriate for a given connector or set of connectors. + */ +struct drm_encoder { + struct drm_device *dev; + struct list_head head; + + struct drm_mode_object base; + char *name; + /** + * @encoder_type: + * + * One of the DRM_MODE_ENCODER_<foo> types in drm_mode.h. The following + * encoder types are defined thus far: + * + * - DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A. + * + * - DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort. + * + * - DRM_MODE_ENCODER_LVDS for display panels, or in general any panel + * with a proprietary parallel connector. + * + * - DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video, + * Component, SCART). + * + * - DRM_MODE_ENCODER_VIRTUAL for virtual machine displays + * + * - DRM_MODE_ENCODER_DSI for panels connected using the DSI serial bus. + * + * - DRM_MODE_ENCODER_DPI for panels connected using the DPI parallel + * bus. + * + * - DRM_MODE_ENCODER_DPMST for special fake encoders used to allow + * mutliple DP MST streams to share one physical encoder. + */ + int encoder_type; + + /** + * @index: Position inside the mode_config.list, can be used as an array + * index. It is invariant over the lifetime of the encoder. + */ + unsigned index; + + /** + * @possible_crtcs: Bitmask of potential CRTC bindings, using + * drm_crtc_index() as the index into the bitfield. The driver must set + * the bits for all &drm_crtc objects this encoder can be connected to + * before calling drm_encoder_init(). + * + * In reality almost every driver gets this wrong. + * + * Note that since CRTC objects can't be hotplugged the assigned indices + * are stable and hence known before registering all objects. + */ + uint32_t possible_crtcs; + + /** + * @possible_clones: Bitmask of potential sibling encoders for cloning, + * using drm_encoder_index() as the index into the bitfield. The driver + * must set the bits for all &drm_encoder objects which can clone a + * &drm_crtc together with this encoder before calling + * drm_encoder_init(). Drivers should set the bit representing the + * encoder itself, too. Cloning bits should be set such that when two + * encoders can be used in a cloned configuration, they both should have + * each another bits set. + * + * In reality almost every driver gets this wrong. + * + * Note that since encoder objects can't be hotplugged the assigned indices + * are stable and hence known before registering all objects. + */ + uint32_t possible_clones; + + struct drm_crtc *crtc; + struct drm_bridge *bridge; + const struct drm_encoder_funcs *funcs; + const struct drm_encoder_helper_funcs *helper_private; +}; + +#define obj_to_encoder(x) container_of(x, struct drm_encoder, base) + +__printf(5, 6) +int drm_encoder_init(struct drm_device *dev, + struct drm_encoder *encoder, + const struct drm_encoder_funcs *funcs, + int encoder_type, const char *name, ...); + +/** + * drm_encoder_index - find the index of a registered encoder + * @encoder: encoder to find index for + * + * Given a registered encoder, return the index of that encoder within a DRM + * device's list of encoders. + */ +static inline unsigned int drm_encoder_index(struct drm_encoder *encoder) +{ + return encoder->index; +} + +/* FIXME: We have an include file mess still, drm_crtc.h needs untangling. */ +static inline uint32_t drm_crtc_mask(struct drm_crtc *crtc); + +/** + * drm_encoder_crtc_ok - can a given crtc drive a given encoder? + * @encoder: encoder to test + * @crtc: crtc to test + * + * Returns false if @encoder can't be driven by @crtc, true otherwise. + */ +static inline bool drm_encoder_crtc_ok(struct drm_encoder *encoder, + struct drm_crtc *crtc) +{ + return !!(encoder->possible_crtcs & drm_crtc_mask(crtc)); +} + +/** + * drm_encoder_find - find a &drm_encoder + * @dev: DRM device + * @id: encoder id + * + * Returns the encoder with @id, NULL if it doesn't exist. Simple wrapper around + * drm_mode_object_find(). + */ +static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev, + uint32_t id) +{ + struct drm_mode_object *mo; + + mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER); + + return mo ? obj_to_encoder(mo) : NULL; +} + +void drm_encoder_cleanup(struct drm_encoder *encoder); + +#endif diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index edc6cfd3aa34..797fb5f80c45 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -491,7 +491,7 @@ static inline int drm_fb_helper_remove_conflicting_framebuffers(struct apertures_struct *a, const char *name, bool primary) { -#if IS_ENABLED(CONFIG_FB) +#if IS_REACHABLE(CONFIG_FB) return remove_conflicting_framebuffers(a, name, primary); #else return 0; diff --git a/include/drm/drm_fourcc.h b/include/drm/drm_fourcc.h index b106337de1bf..30c30fa87ee8 100644 --- a/include/drm/drm_fourcc.h +++ b/include/drm/drm_fourcc.h @@ -25,6 +25,7 @@ #include <linux/types.h> #include <uapi/drm/drm_fourcc.h> +uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth); void drm_fb_get_bpp_depth(uint32_t format, unsigned int *depth, int *bpp); int drm_format_num_planes(uint32_t format); int drm_format_plane_cpp(uint32_t format, int plane); diff --git a/include/drm/drm_framebuffer.h b/include/drm/drm_framebuffer.h index 50deb40d3bfd..b2554c50a903 100644 --- a/include/drm/drm_framebuffer.h +++ b/include/drm/drm_framebuffer.h @@ -25,7 +25,7 @@ #include <linux/list.h> #include <linux/ctype.h> -#include <drm/drm_modeset.h> +#include <drm/drm_mode_object.h> struct drm_framebuffer; struct drm_file; diff --git a/include/drm/drm_mode_object.h b/include/drm/drm_mode_object.h new file mode 100644 index 000000000000..be3d93839ae2 --- /dev/null +++ b/include/drm/drm_mode_object.h @@ -0,0 +1,124 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef __DRM_MODESET_H__ +#define __DRM_MODESET_H__ + +#include <linux/kref.h> +struct drm_object_properties; +struct drm_property; + +/** + * struct drm_mode_object - base structure for modeset objects + * @id: userspace visible identifier + * @type: type of the object, one of DRM_MODE_OBJECT\_\* + * @properties: properties attached to this object, including values + * @refcount: reference count for objects which with dynamic lifetime + * @free_cb: free function callback, only set for objects with dynamic lifetime + * + * Base structure for modeset objects visible to userspace. Objects can be + * looked up using drm_mode_object_find(). Besides basic uapi interface + * properties like @id and @type it provides two services: + * + * - It tracks attached properties and their values. This is used by &drm_crtc, + * &drm_plane and &drm_connector. Properties are attached by calling + * drm_object_attach_property() before the object is visible to userspace. + * + * - For objects with dynamic lifetimes (as indicated by a non-NULL @free_cb) it + * provides reference counting through drm_mode_object_reference() and + * drm_mode_object_unreference(). This is used by &drm_framebuffer, + * &drm_connector and &drm_property_blob. These objects provide specialized + * reference counting wrappers. + */ +struct drm_mode_object { + uint32_t id; + uint32_t type; + struct drm_object_properties *properties; + struct kref refcount; + void (*free_cb)(struct kref *kref); +}; + +#define DRM_OBJECT_MAX_PROPERTY 24 +/** + * struct drm_object_properties - property tracking for &drm_mode_object + */ +struct drm_object_properties { + /** + * @count: number of valid properties, must be less than or equal to + * DRM_OBJECT_MAX_PROPERTY. + */ + + int count; + /** + * @properties: Array of pointers to &drm_property. + * + * NOTE: if we ever start dynamically destroying properties (ie. + * not at drm_mode_config_cleanup() time), then we'd have to do + * a better job of detaching property from mode objects to avoid + * dangling property pointers: + */ + struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY]; + + /** + * @values: Array to store the property values, matching @properties. Do + * not read/write values directly, but use + * drm_object_property_get_value() and drm_object_property_set_value(). + * + * Note that atomic drivers do not store mutable properties in this + * array, but only the decoded values in the corresponding state + * structure. The decoding is done using the ->atomic_get_property and + * ->atomic_set_property hooks of the corresponding object. Hence atomic + * drivers should not use drm_object_property_set_value() and + * drm_object_property_get_value() on mutable objects, i.e. those + * without the DRM_MODE_PROP_IMMUTABLE flag set. + */ + uint64_t values[DRM_OBJECT_MAX_PROPERTY]; +}; + +/* Avoid boilerplate. I'm tired of typing. */ +#define DRM_ENUM_NAME_FN(fnname, list) \ + const char *fnname(int val) \ + { \ + int i; \ + for (i = 0; i < ARRAY_SIZE(list); i++) { \ + if (list[i].type == val) \ + return list[i].name; \ + } \ + return "(unknown)"; \ + } + +struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, + uint32_t id, uint32_t type); +void drm_mode_object_reference(struct drm_mode_object *obj); +void drm_mode_object_unreference(struct drm_mode_object *obj); + +int drm_object_property_set_value(struct drm_mode_object *obj, + struct drm_property *property, + uint64_t val); +int drm_object_property_get_value(struct drm_mode_object *obj, + struct drm_property *property, + uint64_t *value); + +void drm_object_attach_property(struct drm_mode_object *obj, + struct drm_property *property, + uint64_t init_val); +#endif diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h index 1621e9b32330..011f199d3bcf 100644 --- a/include/drm/drm_modes.h +++ b/include/drm/drm_modes.h @@ -27,7 +27,7 @@ #ifndef __DRM_MODES_H__ #define __DRM_MODES_H__ -#include <drm/drm_modeset.h> +#include <drm/drm_mode_object.h> #include <drm/drm_connector.h> /* diff --git a/include/drm/drm_modeset.h b/include/drm/drm_modeset.h deleted file mode 100644 index fe910d5efe12..000000000000 --- a/include/drm/drm_modeset.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (c) 2016 Intel Corporation - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of the copyright holders not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. The copyright holders make no representations - * about the suitability of this software for any purpose. It is provided "as - * is" without express or implied warranty. - * - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO - * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE - * OF THIS SOFTWARE. - */ - -#ifndef __DRM_MODESET_H__ -#define __DRM_MODESET_H__ - -#include <linux/kref.h> -struct drm_object_properties; -struct drm_property; - -struct drm_mode_object { - uint32_t id; - uint32_t type; - struct drm_object_properties *properties; - struct kref refcount; - void (*free_cb)(struct kref *kref); -}; - -#define DRM_OBJECT_MAX_PROPERTY 24 -struct drm_object_properties { - int count, atomic_count; - /* NOTE: if we ever start dynamically destroying properties (ie. - * not at drm_mode_config_cleanup() time), then we'd have to do - * a better job of detaching property from mode objects to avoid - * dangling property pointers: - */ - struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY]; - /* do not read/write values directly, but use drm_object_property_get_value() - * and drm_object_property_set_value(): - */ - uint64_t values[DRM_OBJECT_MAX_PROPERTY]; -}; - -/* Avoid boilerplate. I'm tired of typing. */ -#define DRM_ENUM_NAME_FN(fnname, list) \ - const char *fnname(int val) \ - { \ - int i; \ - for (i = 0; i < ARRAY_SIZE(list); i++) { \ - if (list[i].type == val) \ - return list[i].name; \ - } \ - return "(unknown)"; \ - } - -struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, - uint32_t id, uint32_t type); -void drm_mode_object_reference(struct drm_mode_object *obj); -void drm_mode_object_unreference(struct drm_mode_object *obj); - -#endif diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h index 6c8d3dad66ec..10e449c86dbd 100644 --- a/include/drm/drm_modeset_helper_vtables.h +++ b/include/drm/drm_modeset_helper_vtables.h @@ -266,6 +266,8 @@ struct drm_crtc_helper_funcs { * disable anything at the CRTC level. To ensure that runtime PM * handling (using either DPMS or the new "ACTIVE" property) works * @disable must be the inverse of @enable for atomic drivers. + * Atomic drivers should consider to use @atomic_disable instead of + * this one. * * NOTE: * @@ -391,6 +393,28 @@ struct drm_crtc_helper_funcs { */ void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_crtc_state); + + /** + * @atomic_disable: + * + * This callback should be used to disable the CRTC. With the atomic + * drivers it is called after all encoders connected to this CRTC have + * been shut off already using their own ->disable hook. If that + * sequence is too simple drivers can just add their own hooks and call + * it from this CRTC callback here by looping over all encoders + * connected to it using for_each_encoder_on_crtc(). + * + * This hook is used only by atomic helpers. Atomic drivers don't + * need to implement it if there's no need to disable anything at the + * CRTC level. + * + * Comparing to @disable, this one provides the additional input + * parameter @old_crtc_state which could be used to access the old + * state. Atomic drivers should consider to use this one instead + * of @disable. + */ + void (*atomic_disable)(struct drm_crtc *crtc, + struct drm_crtc_state *old_crtc_state); }; /** diff --git a/include/drm/drm_property.h b/include/drm/drm_property.h new file mode 100644 index 000000000000..30ab289be05d --- /dev/null +++ b/include/drm/drm_property.h @@ -0,0 +1,294 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef __DRM_PROPERTY_H__ +#define __DRM_PROPERTY_H__ + +#include <linux/list.h> +#include <linux/ctype.h> +#include <drm/drm_mode_object.h> + +/** + * struct drm_property_enum - symbolic values for enumerations + * @value: numeric property value for this enum entry + * @head: list of enum values, linked to enum_list in &drm_property + * @name: symbolic name for the enum + * + * For enumeration and bitmask properties this structure stores the symbolic + * decoding for each value. This is used for example for the rotation property. + */ +struct drm_property_enum { + uint64_t value; + struct list_head head; + char name[DRM_PROP_NAME_LEN]; +}; + +/** + * struct drm_property - modeset object property + * + * This structure represent a modeset object property. It combines both the name + * of the property with the set of permissible values. This means that when a + * driver wants to use a property with the same name on different objects, but + * with different value ranges, then it must create property for each one. An + * example would be rotation of &drm_plane, when e.g. the primary plane cannot + * be rotated. But if both the name and the value range match, then the same + * property structure can be instantiated multiple times for the same object. + * Userspace must be able to cope with this and cannot assume that the same + * symbolic property will have the same modeset object ID on all modeset + * objects. + * + * Properties are created by one of the special functions, as explained in + * detail in the @flags structure member. + * + * To actually expose a property it must be attached to each object using + * drm_object_attach_property(). Currently properties can only be attached to + * &drm_connector, &drm_crtc and &drm_plane. + * + * Properties are also used as the generic metadatatransport for the atomic + * IOCTL. Everything that was set directly in structures in the legacy modeset + * IOCTLs (like the plane source or destination windows, or e.g. the links to + * the CRTC) is exposed as a property with the DRM_MODE_PROP_ATOMIC flag set. + */ +struct drm_property { + /** + * @head: per-device list of properties, for cleanup. + */ + struct list_head head; + + /** + * @base: base KMS object + */ + struct drm_mode_object base; + + /** + * @flags: + * + * Property flags and type. A property needs to be one of the following + * types: + * + * DRM_MODE_PROP_RANGE + * Range properties report their minimum and maximum admissible unsigned values. + * The KMS core verifies that values set by application fit in that + * range. The range is unsigned. Range properties are created using + * drm_property_create_range(). + * + * DRM_MODE_PROP_SIGNED_RANGE + * Range properties report their minimum and maximum admissible unsigned values. + * The KMS core verifies that values set by application fit in that + * range. The range is signed. Range properties are created using + * drm_property_create_signed_range(). + * + * DRM_MODE_PROP_ENUM + * Enumerated properties take a numerical value that ranges from 0 to + * the number of enumerated values defined by the property minus one, + * and associate a free-formed string name to each value. Applications + * can retrieve the list of defined value-name pairs and use the + * numerical value to get and set property instance values. Enum + * properties are created using drm_property_create_enum(). + * + * DRM_MODE_PROP_BITMASK + * Bitmask properties are enumeration properties that additionally + * restrict all enumerated values to the 0..63 range. Bitmask property + * instance values combine one or more of the enumerated bits defined + * by the property. Bitmask properties are created using + * drm_property_create_bitmask(). + * + * DRM_MODE_PROB_OBJECT + * Object properties are used to link modeset objects. This is used + * extensively in the atomic support to create the display pipeline, + * by linking &drm_framebuffer to &drm_plane, &drm_plane to + * &drm_crtc and &drm_connector to &drm_crtc. An object property can + * only link to a specific type of &drm_mode_object, this limit is + * enforced by the core. Object properties are created using + * drm_property_create_object(). + * + * Object properties work like blob properties, but in a more + * general fashion. They are limited to atomic drivers and must have + * the DRM_MODE_PROP_ATOMIC flag set. + * + * DRM_MODE_PROP_BLOB + * Blob properties store a binary blob without any format restriction. + * The binary blobs are created as KMS standalone objects, and blob + * property instance values store the ID of their associated blob + * object. Blob properties are created by calling + * drm_property_create() with DRM_MODE_PROP_BLOB as the type. + * + * Actual blob objects to contain blob data are created using + * drm_property_create_blob(), or through the corresponding IOCTL. + * + * Besides the built-in limit to only accept blob objects blob + * properties work exactly like object properties. The only reasons + * blob properties exist is backwards compatibility with existing + * userspace. + * + * In addition a property can have any combination of the below flags: + * + * DRM_MODE_PROP_ATOMIC + * Set for properties which encode atomic modeset state. Such + * properties are not exposed to legacy userspace. + * + * DRM_MODE_PROP_IMMUTABLE + * Set for properties where userspace cannot be changed by + * userspace. The kernel is allowed to update the value of these + * properties. This is generally used to expose probe state to + * usersapce, e.g. the EDID, or the connector path property on DP + * MST sinks. + */ + uint32_t flags; + + /** + * @name: symbolic name of the properties + */ + char name[DRM_PROP_NAME_LEN]; + + /** + * @num_values: size of the @values array. + */ + uint32_t num_values; + + /** + * @values: + * + * Array with limits and values for the property. The + * interpretation of these limits is dependent upon the type per @flags. + */ + uint64_t *values; + + /** + * @dev: DRM device + */ + struct drm_device *dev; + + /** + * @enum_list: + * + * List of &drm_prop_enum_list structures with the symbolic names for + * enum and bitmask values. + */ + struct list_head enum_list; +}; + +/** + * struct drm_property_blob - Blob data for &drm_property + * @base: base KMS object + * @dev: DRM device + * @head_global: entry on the global blob list in &drm_mode_config + * property_blob_list. + * @head_file: entry on the per-file blob list in &drm_file blobs list. + * @length: size of the blob in bytes, invariant over the lifetime of the object + * @data: actual data, embedded at the end of this structure + * + * Blobs are used to store bigger values than what fits directly into the 64 + * bits available for a &drm_property. + * + * Blobs are reference counted using drm_property_reference_blob() and + * drm_property_unreference_blob(). They are created using + * drm_property_create_blob(). + */ +struct drm_property_blob { + struct drm_mode_object base; + struct drm_device *dev; + struct list_head head_global; + struct list_head head_file; + size_t length; + unsigned char data[]; +}; + +struct drm_prop_enum_list { + int type; + char *name; +}; + +#define obj_to_property(x) container_of(x, struct drm_property, base) + +/** + * drm_property_type_is - check the type of a property + * @property: property to check + * @type: property type to compare with + * + * This is a helper function becauase the uapi encoding of property types is + * a bit special for historical reasons. + */ +static inline bool drm_property_type_is(struct drm_property *property, + uint32_t type) +{ + /* instanceof for props.. handles extended type vs original types: */ + if (property->flags & DRM_MODE_PROP_EXTENDED_TYPE) + return (property->flags & DRM_MODE_PROP_EXTENDED_TYPE) == type; + return property->flags & type; +} + +struct drm_property *drm_property_create(struct drm_device *dev, int flags, + const char *name, int num_values); +struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags, + const char *name, + const struct drm_prop_enum_list *props, + int num_values); +struct drm_property *drm_property_create_bitmask(struct drm_device *dev, + int flags, const char *name, + const struct drm_prop_enum_list *props, + int num_props, + uint64_t supported_bits); +struct drm_property *drm_property_create_range(struct drm_device *dev, int flags, + const char *name, + uint64_t min, uint64_t max); +struct drm_property *drm_property_create_signed_range(struct drm_device *dev, + int flags, const char *name, + int64_t min, int64_t max); +struct drm_property *drm_property_create_object(struct drm_device *dev, + int flags, const char *name, uint32_t type); +struct drm_property *drm_property_create_bool(struct drm_device *dev, int flags, + const char *name); +int drm_property_add_enum(struct drm_property *property, int index, + uint64_t value, const char *name); +void drm_property_destroy(struct drm_device *dev, struct drm_property *property); + +struct drm_property_blob *drm_property_create_blob(struct drm_device *dev, + size_t length, + const void *data); +struct drm_property_blob *drm_property_lookup_blob(struct drm_device *dev, + uint32_t id); +int drm_property_replace_global_blob(struct drm_device *dev, + struct drm_property_blob **replace, + size_t length, + const void *data, + struct drm_mode_object *obj_holds_id, + struct drm_property *prop_holds_id); +struct drm_property_blob *drm_property_reference_blob(struct drm_property_blob *blob); +void drm_property_unreference_blob(struct drm_property_blob *blob); + +/** + * drm_connector_find - find property object + * @dev: DRM device + * @id: property object id + * + * This function looks up the property object specified by id and returns it. + */ +static inline struct drm_property *drm_property_find(struct drm_device *dev, + uint32_t id) +{ + struct drm_mode_object *mo; + mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_PROPERTY); + return mo ? obj_to_property(mo) : NULL; +} + +#endif diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h index 269039722f91..5d112f75e04c 100644 --- a/include/drm/drm_simple_kms_helper.h +++ b/include/drm/drm_simple_kms_helper.h @@ -60,6 +60,12 @@ struct drm_simple_display_pipe_funcs { * * This function is called when the underlying plane state is updated. * This hook is optional. + * + * This is the function drivers should submit the + * &drm_pending_vblank_event from. Using either + * drm_crtc_arm_vblank_event(), when the driver supports vblank + * interrupt handling, or drm_crtc_send_vblank_event() directly in case + * the hardware lacks vblank support entirely. */ void (*update)(struct drm_simple_display_pipe *pipe, struct drm_plane_state *plane_state); @@ -85,6 +91,11 @@ struct drm_simple_display_pipe { const struct drm_simple_display_pipe_funcs *funcs; }; +int drm_simple_display_pipe_attach_bridge(struct drm_simple_display_pipe *pipe, + struct drm_bridge *bridge); + +void drm_simple_display_pipe_detach_bridge(struct drm_simple_display_pipe *pipe); + int drm_simple_display_pipe_init(struct drm_device *dev, struct drm_simple_display_pipe *pipe, const struct drm_simple_display_pipe_funcs *funcs, |