diff options
-rw-r--r-- | drivers/mfd/ab8500-core.c | 24 |
1 files changed, 10 insertions, 14 deletions
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 582d3587f56a..f3d689176fc2 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -113,7 +113,7 @@ #define AB8500_SWITCH_OFF_STATUS 0x00 #define AB8500_TURN_ON_STATUS 0x00 -#define AB8505_TURN_ON_STATUS_2 0x04 +#define AB8505_TURN_ON_STATUS_2 0x04 #define AB8500_CH_USBCH_STAT1_REG 0x02 #define VBUS_DET_DBNC100 0x02 @@ -211,7 +211,7 @@ static int set_register_interruptible(struct ab8500 *ab8500, u8 bank, /* * Put the u8 bank and u8 register together into a an u16. * The bank on higher 8 bits and register in lower 8 bits. - * */ + */ u16 addr = ((u16)bank) << 8 | reg; dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data); @@ -243,8 +243,6 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank, u8 reg, u8 *value) { int ret; - /* put the u8 bank and u8 reg together into a an u16. - * bank on higher 8 bits and reg in lower */ u16 addr = ((u16)bank) << 8 | reg; mutex_lock(&ab8500->lock); @@ -278,8 +276,6 @@ static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank, u8 reg, u8 bitmask, u8 bitvalues) { int ret; - /* put the u8 bank and u8 reg together into a an u16. - * bank on higher 8 bits and reg in lower */ u16 addr = ((u16)bank) << 8 | reg; mutex_lock(&ab8500->lock); @@ -449,12 +445,12 @@ static void update_latch_offset(u8 *offset, int i) { /* Fix inconsistent ITFromLatch25 bit mapping... */ if (unlikely(*offset == 17)) - *offset = 24; + *offset = 24; /* Fix inconsistent ab8540 bit mapping... */ if (unlikely(*offset == 16)) - *offset = 25; + *offset = 25; if ((i == 3) && (*offset >= 24)) - *offset += 2; + *offset += 2; } static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500, @@ -590,12 +586,12 @@ static int ab8500_irq_init(struct ab8500 *ab8500, struct device_node *np) /* If ->irq_base is zero this will give a linear mapping */ ab8500->domain = irq_domain_add_simple(ab8500->dev->of_node, - num_irqs, 0, - &ab8500_irq_ops, ab8500); + num_irqs, 0, + &ab8500_irq_ops, ab8500); if (!ab8500->domain) { dev_err(ab8500->dev, "Failed to create irqdomain\n"); - return -ENOSYS; + return -ENODEV; } return 0; @@ -1073,7 +1069,7 @@ static struct attribute_group ab9540_attr_group = { static int ab8500_probe(struct platform_device *pdev) { - static const char *switch_off_status[] = { + static const char * const switch_off_status[] = { "Swoff bit programming", "Thermal protection activation", "Vbat lower then BattOk falling threshold", @@ -1082,7 +1078,7 @@ static int ab8500_probe(struct platform_device *pdev) "Battery level lower than power on reset threshold", "Power on key 1 pressed longer than 10 seconds", "DB8500 thermal shutdown"}; - static const char *turn_on_status[] = { + static const char * const turn_on_status[] = { "Battery rising (Vbat)", "Power On Key 1 dbF", "Power On Key 2 dbF", |