diff options
| -rw-r--r-- | Documentation/hwmon/nct6683 | 57 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/nct6683.c | 1455 |
4 files changed, 1523 insertions, 0 deletions
diff --git a/Documentation/hwmon/nct6683 b/Documentation/hwmon/nct6683 new file mode 100644 index 000000000000..c1301d4300cd --- /dev/null +++ b/Documentation/hwmon/nct6683 @@ -0,0 +1,57 @@ +Kernel driver nct6683 +===================== + +Supported chips: + * Nuvoton NCT6683D + Prefix: 'nct6683' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request + +Authors: + Guenter Roeck <linux@roeck-us.net> + +Description +----------- + +This driver implements support for the Nuvoton NCT6683D eSIO chip. + +The chips implement up to shared 32 temperature and voltage sensors. +It supports up to 16 fan rotation sensors and up to 8 fan control engines. + +Temperatures are measured in degrees Celsius. Measurement resolution is +0.5 degrees C. + +Voltage sensors (also known as IN sensors) report their values in millivolts. + +Fan rotation speeds are reported in RPM (rotations per minute). + +Usage Note +---------- + +Limit register locations on Intel boards with EC firmware version 1.0 +build date 04/03/13 do not match the register locations in the Nuvoton +datasheet. Nuvoton confirms that Intel uses a special firmware version +with different register addresses. The specification describing the Intel +firmware is held under NDA by Nuvoton and Intel and not available +to the public. + +Some of the register locations can be reverse engineered; others are too +well hidden. Given this, writing any values from the operating system is +considered too risky with this firmware and has been disabled. All limits +must all be written from the BIOS. + +The driver has only been tested with the Intel firmware, and by default +only instantiates on Intel boards. To enable it on non-Intel boards, +set the 'force' module parameter to 1. + +Tested Boards and Firmware Versions +----------------------------------- + +The driver has been reported to work with the following boards and +firmware versions. + +Board Firmware version +--------------------------------------------------------------- +Intel DH87RL NCT6683D EC firmware version 1.0 build 04/03/13 +Intel DH87MC NCT6683D EC firmware version 1.0 build 04/03/13 +Intel DB85FL NCT6683D EC firmware version 1.0 build 04/03/13 diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index bc196f49ec53..b7c0b830d9e4 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1065,6 +1065,16 @@ config SENSORS_NTC_THERMISTOR This driver can also be built as a module. If so, the module will be called ntc-thermistor. +config SENSORS_NCT6683 + tristate "Nuvoton NCT6683D" + depends on !PPC + help + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6683D eSIO chip. + + This driver can also be built as a module. If so, the module + will be called nct6683. + config SENSORS_NCT6775 tristate "Nuvoton NCT6775F and compatibles" depends on !PPC diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index c48f9873ac73..11798ad7e801 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -114,6 +114,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o obj-$(CONFIG_SENSORS_MAX6697) += max6697.o obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o +obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o diff --git a/drivers/hwmon/nct6683.c b/drivers/hwmon/nct6683.c new file mode 100644 index 000000000000..540c81c52344 --- /dev/null +++ b/drivers/hwmon/nct6683.c @@ -0,0 +1,1455 @@ +/* + * nct6683 - Driver for the hardware monitoring functionality of + * Nuvoton NCT6683D eSIO + * + * Copyright (C) 2013 Guenter Roeck <linux@roeck-us.net> + * + * Derived from nct6775 driver + * Copyright (C) 2012, 2013 Guenter Roeck <linux@roeck-us.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Supports the following chips: + * + * Chip #vin #fan #pwm #temp chip ID + * nct6683d 21(1) 16 8 32(1) 0xc730 + * + * Notes: + * (1) Total number of vin and temp inputs is 32. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/acpi.h> +#include <linux/dmi.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +enum kinds { nct6683 }; + +static bool force; +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Set to one to enable detection on non-Intel boards"); + +static const char * const nct6683_device_names[] = { + "nct6683", +}; + +static const char * const nct6683_chip_names[] = { + "NCT6683D", +}; + +#define DRVNAME "nct6683" + +/* + * Super-I/O constants and functions + */ + +#define NCT6683_LD_ACPI 0x0a +#define NCT6683_LD_HWM 0x0b +#define NCT6683_LD_VID 0x0d + +#define SIO_REG_LDSEL 0x07 /* Logical device select */ +#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ +#define SIO_REG_ENABLE 0x30 /* Logical device enable */ +#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ + +#define SIO_NCT6681_ID 0xb270 /* for later */ +#define SIO_NCT6683_ID 0xc730 +#define SIO_ID_MASK 0xFFF0 + +static inline void +superio_outb(int ioreg, int reg, int val) +{ + outb(reg, ioreg); + outb(val, ioreg + 1); +} + +static inline int +superio_inb(int ioreg, int reg) +{ + outb(reg, ioreg); + return inb(ioreg + 1); +} + +static inline void +superio_select(int ioreg, int ld) +{ + outb(SIO_REG_LDSEL, ioreg); + outb(ld, ioreg + 1); +} + +static inline int +superio_enter(int ioreg) +{ + /* + * Try to reserve <ioreg> and <ioreg + 1> for exclusive access. + */ + if (!request_muxed_region(ioreg, 2, DRVNAME)) + return -EBUSY; + + outb(0x87, ioreg); + outb(0x87, ioreg); + + return 0; +} + +static inline void +superio_exit(int ioreg) +{ + outb(0xaa, ioreg); + outb(0x02, ioreg); + outb(0x02, ioreg + 1); + release_region(ioreg, 2); +} + +/* + * ISA constants + */ + +#define IOREGION_ALIGNMENT (~7) +#define IOREGION_OFFSET 4 /* Use EC port 1 */ +#define IOREGION_LENGTH 4 + +#define EC_PAGE_REG 0 +#define EC_INDEX_REG 1 +#define EC_DATA_REG 2 +#define EC_EVENT_REG 3 + +/* Common and NCT6683 specific data */ + +#define NCT6683_NUM_REG_MON 32 +#define NCT6683_NUM_REG_FAN 16 +#define NCT6683_NUM_REG_PWM 8 + +#define NCT6683_REG_MON(x) (0x100 + (x) * 2) +#define NCT6683_REG_FAN_RPM(x) (0x140 + (x) * 2) +#define NCT6683_REG_PWM(x) (0x160 + (x)) + +#define NCT6683_REG_MON_STS(x) (0x174 + (x)) +#define NCT6683_REG_IDLE(x) (0x178 + (x)) + +#define NCT6683_REG_FAN_STS(x) (0x17c + (x)) +#define NCT6683_REG_FAN_ERRSTS 0x17e +#define NCT6683_REG_FAN_INITSTS 0x17f + +#define NCT6683_HWM_CFG 0x180 + +#define NCT6683_REG_MON_CFG(x) (0x1a0 + (x)) +#define NCT6683_REG_FANIN_CFG(x) (0x1c0 + (x)) +#define NCT6683_REG_FANOUT_CFG(x) (0x1d0 + (x)) + +#define NCT6683_REG_INTEL_TEMP_MAX(x) (0x901 + (x) * 16) +#define NCT6683_REG_INTEL_TEMP_CRIT(x) (0x90d + (x) * 16) + +#define NCT6683_REG_TEMP_HYST(x) (0x330 + (x)) /* 8 bit */ +#define NCT6683_REG_TEMP_MAX(x) (0x350 + (x)) /* 8 bit */ +#define NCT6683_REG_MON_HIGH(x) (0x370 + (x) * 2) /* 8 bit */ +#define NCT6683_REG_MON_LOW(x) (0x371 + (x) * 2) /* 8 bit */ + +#define NCT6683_REG_FAN_MIN(x) (0x3b8 + (x) * 2) /* 16 bit */ + +#define NCT6683_REG_CUSTOMER_ID 0x602 +#define NCT6683_CUSTOMER_ID_INTEL 0x805 + +#define NCT6683_REG_BUILD_YEAR 0x604 +#define NCT6683_REG_BUILD_MONTH 0x605 +#define NCT6683_REG_BUILD_DAY 0x606 +#define NCT6683_REG_SERIAL 0x607 +#define NCT6683_REG_VERSION_HI 0x608 +#define NCT6683_REG_VERSION_LO 0x609 + +#define NCT6683_REG_CR_CASEOPEN 0xe8 +#define NCT6683_CR_CASEOPEN_MASK (1 << 7) + +#define NCT6683_REG_CR_BEEP 0xe0 +#define NCT6683_CR_BEEP_MASK (1 << 6) + +static const char *const nct6683_mon_label[] = { + NULL, /* disabled */ + "Local", + "Diode 0 (curr)", + "Diode 1 (curr)", + "Diode 2 (curr)", + "Diode 0 (volt)", + "Diode 1 (volt)", + "Diode 2 (volt)", + "Thermistor 14", + "Thermistor 15", + "Thermistor 16", + "Thermistor 0", + "Thermistor 1", + "Thermistor 2", + "Thermistor 3", + "Thermistor 4", + "Thermistor 5", /* 0x10 */ + "Thermistor 6", + "Thermistor 7", + "Thermistor 8", + "Thermistor 9", + "Thermistor 10", + "Thermistor 11", + "Thermistor 12", + "Thermistor 13", + NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "PECI 0.0", /* 0x20 */ + "PECI 1.0", + "PECI 2.0", + "PECI 3.0", + "PECI 0.1", + "PECI 1.1", + "PECI 2.1", + "PECI 3.1", + "PECI DIMM 0", + "PECI DIMM 1", + "PECI DIMM 2", + "PECI DIMM 3", + NULL, NULL, NULL, NULL, + "PCH CPU", /* 0x30 */ + "PCH CHIP", + "PCH CHIP CPU MAX", + "PCH MCH", + "PCH DIMM 0", + "PCH DIMM 1", + "PCH DIMM 2", + "PCH DIMM 3", + "SMBus 0", + "SMBus 1", + "SMBus 2", + "SMBus 3", + "SMBus 4", + "SMBus 5", + "DIMM 0", + "DIMM 1", + "DIMM 2", /* 0x40 */ + "DIMM 3", + "AMD TSI Addr 90h", + "AMD TSI Addr 92h", + "AMD TSI Addr 94h", + "AMD TSI Addr 96h", + "AMD TSI Addr 98h", + "AMD TSI Addr 9ah", + "AMD TSI Addr 9ch", + "AMD TSI Addr 9dh", + NULL, NULL, NULL, NULL, NULL, NULL, + "Virtual 0", /* 0x50 */ + "Virtual 1", + "Virtual 2", + "Virtual 3", + "Virtual 4", + "Virtual 5", + "Virtual 6", + "Virtual 7", + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "VCC", /* 0x60 voltage sensors */ + "VSB", + "AVSB", + "VTT", + "VBAT", + "VREF", + "VIN0", + "VIN1", + "VIN2", + "VIN3", + "VIN4", + "VIN5", + "VIN6", + "VIN7", + "VIN8", + "VIN9", + "VIN10", + "VIN11", + "VIN12", + "VIN13", + "VIN14", + "VIN15", + "VIN16", +}; + +#define NUM_MON_LABELS ARRAY_SIZE(nct6683_mon_label) +#define MON_VOLTAGE_START 0x60 + +/* ------------------------------------------------------- */ + +struct nct6683_data { + int addr; /* IO base of EC space */ + int sioreg; /* SIO register */ + enum kinds kind; + u16 customer_id; + + struct device *hwmon_dev; + const struct attribute_group *groups[6]; + + int temp_num; /* number of temperature attributes */ + u8 temp_index[NCT6683_NUM_REG_MON]; + u8 temp_src[NCT6683_NUM_REG_MON]; + + u8 in_num; /* number of voltage attributes */ + u8 in_index[NCT6683_NUM_REG_MON]; + u8 in_src[NCT6683_NUM_REG_MON]; + + struct mutex update_lock; /* used to protect sensor updates */ + bool valid; /* true if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + /* Voltage attribute values */ + u8 in[3][NCT6683_NUM_REG_MON]; /* [0]=in, [1]=in_max, [2]=in_min */ + + /* Temperature attribute values */ + s16 temp_in[NCT6683_NUM_REG_MON]; + s8 temp[4][NCT6683_NUM_REG_MON];/* [0]=min, [1]=max, [2]=hyst, + * [3]=crit + */ + + /* Fan attribute values */ + unsigned int rpm[NCT6683_NUM_REG_FAN]; + u16 fan_min[NCT6683_NUM_REG_FAN]; + u8 fanin_cfg[NCT6683_NUM_REG_FAN]; + u8 fanout_cfg[NCT6683_NUM_REG_FAN]; + u16 have_fan; /* some fan inputs can be disabled */ + + u8 have_pwm; + u8 pwm[NCT6683_NUM_REG_PWM]; + +#ifdef CONFIG_PM + /* Remember extra register values over suspend/resume */ + u8 hwm_cfg; +#endif +}; + +struct nct6683_sio_data { + int sioreg; + enum kinds kind; +}; + +struct sensor_device_template { + struct device_attribute dev_attr; + union { + struct { + u8 nr; + u8 index; + } s; + int index; + } u; + bool s2; /* true if both index and nr are used */ +}; + +struct sensor_device_attr_u { + union { + struct sensor_device_attribute a1; + struct sensor_device_attribute_2 a2; + } u; + char name[32]; +}; + +#define __TEMPLATE_ATTR(_template, _mode, _show, _store) { \ + .attr = {.name = _template, .mode = _mode }, \ + .show = _show, \ + .store = _store, \ +} + +#define SENSOR_DEVICE_TEMPLATE(_template, _mode, _show, _store, _index) \ + { .dev_attr = __TEMPLATE_ATTR(_template, _mode, _show, _store), \ + .u.index = _index, \ + .s2 = false } + +#define SENSOR_DEVICE_TEMPLATE_2(_template, _mode, _show, _store, \ + _nr, _index) \ + { .dev_attr = __TEMPLATE_ATTR(_template, _mode, _show, _store), \ + .u.s.index = _index, \ + .u.s.nr = _nr, \ + .s2 = true } + +#define SENSOR_TEMPLATE(_name, _template, _mode, _show, _store, _index) \ +static struct sensor_device_template sensor_dev_template_##_name \ + = SENSOR_DEVICE_TEMPLATE(_template, _mode, _show, _store, \ + _index) + +#define SENSOR_TEMPLATE_2(_name, _template, _mode, _show, _store, \ + _nr, _index) \ +static struct sensor_device_template sensor_dev_template_##_name \ + = SENSOR_DEVICE_TEMPLATE_2(_template, _mode, _show, _store, \ + _nr, _index) + +struct sensor_template_group { + struct sensor_device_template **templates; + umode_t (*is_visible)(struct kobject *, struct attribute *, int); + int base; +}; + +static struct attribute_group * +nct6683_create_attr_group(struct device *dev, struct sensor_template_group *tg, + int repeat) +{ + struct sensor_device_attribute_2 *a2; + struct sensor_device_attribute *a; + struct sensor_device_template **t; + struct sensor_device_attr_u *su; + struct attribute_group *group; + struct attribute **attrs; + int i, j, count; + + if (repeat <= 0) + return ERR_PTR(-EINVAL); + + t = tg->templates; + for (count = 0; *t; t++, count++) + ; + + if (count == 0) + return ERR_PTR(-EINVAL); + + group = devm_kzalloc(dev, sizeof(*group), GFP_KERNEL); + if (group == NULL) + return ERR_PTR(-ENOMEM); + + attrs = devm_kzalloc(dev, sizeof(*attrs) * (repeat * count + 1), + GFP_KERNEL); + if (attrs == NULL) + return ERR_PTR(-ENOMEM); + + su = devm_kzalloc(dev, sizeof(*su) * repeat * count, + GFP_KERNEL); + if (su == NULL) + return ERR_PTR(-ENOMEM); + + group->attrs = attrs; + group->is_visible = tg->is_visible; + + for (i = 0; i < repeat; i++) { + t = tg->templates; + for (j = 0; *t != NULL; j++) { + snprintf(su->name, sizeof(su->name), + (*t)->dev_attr.attr.name, tg->base + i); + if ((*t)->s2) { + a2 = &su->u.a2; + a2->dev_attr.attr.name = su->name; + a2->nr = (*t)->u.s.nr + i; + a2->index = (*t)->u.s.index; + a2->dev_attr.attr.mode = + (*t)->dev_attr.attr.mode; + a2->dev_attr.show = (*t)->dev_attr.show; + a2->dev_attr.store = (*t)->dev_attr.store; + *attrs = &a2->dev_attr.attr; + } else { + a = &su->u.a1; + a->dev_attr.attr.name = su->name; + a->index = (*t)->u.index + i; + a->dev_attr.attr.mode = + (*t)->dev_attr.attr.mode; + a->dev_attr.show = (*t)->dev_attr.show; + a->dev_attr.store = (*t)->dev_attr.store; + *attrs = &a->dev_attr.attr; + } + attrs++; + su++; + t++; + } + } + + return group; +} + +/* LSB is 16 mV, except for the following sources, where it is 32 mV */ +#define MON_SRC_VCC 0x60 +#define MON_SRC_VSB 0x61 +#define MON_SRC_AVSB 0x62 +#define MON_SRC_VBAT 0x64 + +static inline long in_from_reg(u16 reg, u8 src) +{ + int scale = 16; + + if (src == MON_SRC_VCC || src == MON_SRC_VSB || src == MON_SRC_AVSB || + src == MON_SRC_VBAT) + scale <<= 1; + return reg * scale; +} + +static inline u16 in_to_reg(u32 val, u8 src) +{ + int scale = 16; + + if (src == MON_SRC_VCC || src == MON_SRC_VSB || src == MON_SRC_AVSB || + src == MON_SRC_VBAT) + scale <<= 1; + + return clamp_val(DIV_ROUND_CLOSEST(val, scale), 0, 127); +} + +static u16 nct6683_read(struct nct6683_data *data, u16 reg) +{ + int res; + + outb_p(0xff, data->addr + EC_PAGE_REG); /* unlock */ + outb_p(reg >> 8, data->addr + EC_PAGE_REG); + outb_p(reg & 0xff, data->addr + EC_INDEX_REG); + res = inb_p(data->addr + EC_DATA_REG); + return res; +} + +static u16 nct6683_read16(struct nct6683_data *data, u16 reg) +{ + return (nct6683_read(data, reg) << 8) | nct6683_read(data, reg + 1); +} + +static void nct6683_write(struct nct6683_data *data, u16 reg, u16 value) +{ + outb_p(0xff, data->addr + EC_PAGE_REG); /* unlock */ + outb_p(reg >> 8, data->addr + EC_PAGE_REG); + outb_p(reg & 0xff, data->addr + EC_INDEX_REG); + outb_p(value & 0xff, data->addr + EC_DATA_REG); +} + +static int get_in_reg(struct nct6683_data *data, int nr, int index) +{ + int ch = data->in_index[index]; + int reg = -EINVAL; + + switch (nr) { + case 0: + reg = NCT6683_REG_MON(ch); + break; + case 1: + if (data->customer_id != NCT6683_CUSTOMER_ID_INTEL) + reg = NCT6683_REG_MON_LOW(ch); + break; + case 2: + if (data->customer_id != NCT6683_CUSTOMER_ID_INTEL) + reg = NCT6683_REG_MON_HIGH(ch); + break; + default: + break; + } + return reg; +} + +static int get_temp_reg(struct nct6683_data *data, int nr, int index) +{ + int ch = data->temp_index[index]; + int reg = -EINVAL; + + switch (data->customer_id) { + case NCT6683_CUSTOMER_ID_INTEL: + switch (nr) { + default: + case 1: /* max */ + reg = NCT6683_REG_INTEL_TEMP_MAX(ch); + break; + case 3: /* crit */ + reg = NCT6683_REG_INTEL_TEMP_CRIT(ch); + break; + } + break; + default: + switch (nr) { + default: + case 0: /* min */ + reg = NCT6683_REG_MON_LOW(ch); + break; + case 1: /* max */ + reg = NCT6683_REG_TEMP_MAX(ch); + break; + case 2: /* hyst */ + reg = NCT6683_REG_TEMP_HYST(ch); + break; + case 3: /* crit */ + reg = NCT6683_REG_MON_HIGH(ch); + break; + } + break; + } + return reg; +} + +static void nct6683_update_pwm(struct device *dev) +{ + struct nct6683_data *data = dev_get_drvdata(dev); + int i; + + for (i = 0; i < NCT6683_NUM_REG_PWM; i++) { + if (!(data->have_pwm & (1 << i))) + continue; + data->pwm[i] = nct6683_read(data, NCT6683_REG_PWM(i)); + } +} + +static struct nct6683_data *nct6683_update_device(struct device *dev) +{ + struct nct6683_data *data = dev_get_drvdata(dev); + int i, j; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + /* Measured voltages and limits */ + for (i = 0; i < data->in_num; i++) { + for (j = 0; j < 3; j++) { + int reg = get_in_reg(data, j, i); + + if (reg >= 0) + data->in[j][i] = + nct6683_read(data, reg); + } + } + + /* Measured temperatures and limits */ + for (i = 0; i < data->temp_num; i++) { + u8 ch = data->temp_index[i]; + + data->temp_in[i] = nct6683_read16(data, + NCT6683_REG_MON(ch)); + for (j = 0; j < 4; j++) { + int reg = get_temp_reg(data, j, i); + + if (reg >= 0) + data->temp[j][i] = + nct6683_read(data, reg); + } + } + + /* Measured fan speeds and limits */ + for (i = 0; i < ARRAY_SIZE(data->rpm); i++) { + if (!(data->have_fan & (1 << i))) + continue; + + data->rpm[i] = nct6683_read16(data, + NCT6683_REG_FAN_RPM(i)); + data->fan_min[i] = nct6683_read16(data, + NCT6683_REG_FAN_MIN(i)); + } + + nct6683_update_pwm(dev); + + data->last_updated = jiffies; + data->valid = true; + } + + mutex_unlock(&data->update_lock); + return data; +} + +/* + * Sysfs callback functions + */ +static ssize_t +show_in_label(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); + struct nct6683_data *data = nct6683_update_device(dev); + int nr = sattr->index; + + return sprintf(buf, "%s\n", nct6683_mon_label[data->in_src[nr]]); +} + +static ssize_t +show_in_reg(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct nct6683_data *data = nct6683_update_device(dev); + int index = sattr->index; + int nr = sattr->nr; + + return sprintf(buf, "%ld\n", + in_from_reg(data->in[index][nr], data->in_index[index])); +} + +static umode_t nct6683_in_is_visible(struct kobject *kobj, + struct attribute *attr, int index) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nct6683_data *data = dev_get_drvdata(dev); + int nr = index % 4; /* attribute */ + + /* + * Voltage limits exist for Intel boards, + * but register location and encoding is unknown + */ + if ((nr == 2 || nr == 3) && + data->customer_id == NCT6683_CUSTOMER_ID_INTEL) + return 0; + + return attr->mode; +} + +SENSOR_TEMPLATE(in_label, "in%d_label", S_IRUGO, show_in_label, NULL, 0); +SENSOR_TEMPLATE_2(in_input, "in%d_input", S_IRUGO, show_in_reg, NULL, 0, 0); +SENSOR_TEMPLATE_2(in_min, "in%d_min", S_IRUGO, show_in_reg, NULL, 0, 1); +SENSOR_TEMPLATE_2(in_max, "in%d_max", S_IRUGO, show_in_reg, NULL, 0, 2); + +static struct sensor_device_template *nct6683_attributes_in_template[] = { + &sensor_dev_template_in_label, + &sensor_dev_template_in_input, + &sensor_dev_template_in_min, + &sensor_dev_template_in_max, + NULL +}; + +static struct sensor_template_group nct6683_in_template_group = { + .templates = nct6683_attributes_in_template, + .is_visible = nct6683_in_is_visible, +}; + +static ssize_t +show_fan(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); + struct nct6683_data *data = nct6683_update_device(dev); + + return sprintf(buf, "%d\n", data->rpm[sattr->index]); +} + +static ssize_t +show_fan_min(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct nct6683_data *data = nct6683_update_device(dev); + struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); + int nr = sattr->index; + + return sprintf(buf, "%d\n", data->fan_min[nr]); +} + +static ssize_t +show_fan_pulses(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); + struct nct6683_data *data = nct6683_update_device(dev); + + return sprintf(buf, "%d\n", + ((data->fanin_cfg[sattr->index] >> 5) & 0x03) + 1); +} + +static umode_t nct6683_fan_is_visible(struct kobject *kobj, + struct attribute *attr, int index) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nct6683_data *data = dev_get_drvdata(dev); + int fan = index / 3; /* fan index */ + int nr = index % 3; /* attribute index */ + + if (!(data->have_fan & (1 << fan))) + return 0; + + /* + * Intel may have minimum fan speed limits, + * but register location and encoding are unknown. + */ + if (nr == 2 && data->customer_id == NCT6683_CUSTOMER_ID_INTEL) + return 0; + + return attr->mode; +} + +SENSOR_TEMPLATE(fan_input, "fan%d_input", S_IRUGO, show_fan, NULL, 0); +SENSOR_TEMPLATE(fan_pulses, "fan%d_pulses", S_IRUGO, show_fan_pulses, NULL, 0); +SENSOR_TEMPLATE(fan_min, "fan%d_min", S_IRUGO, show_fan_min, NULL, 0); + +/* + * nct6683_fan_is_visible uses the index into the following array + * to determine if attributes should be created or not. + * Any change in order or content must be matched. + */ +static struct sensor_device_template *nct6683_attributes_fan_template[] = { + &sensor_dev_template_fan_input, + &sensor_dev_template_fan_pulses, + &sensor_dev_template_fan_min, + NULL +}; + +static struct sensor_template_group nct6683_fan_template_group = { + .templates = nct6683_attributes_fan_template, + .is_visible = nct6683_fan_is_visible, + .base = 1, +}; + +static ssize_t +show_temp_label(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); + struct nct6683_data *data = nct6683_update_device(dev); + int nr = sattr->index; + + return sprintf(buf, "%s\n", nct6683_mon_label[data->temp_src[nr]]); +} + +static ssize_t +show_temp8(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + struct nct6683_data *data = nct6683_update_device(dev); + int index = sattr->index; + int nr = sattr->nr; + + return sprintf(buf, "%d\n", data->temp[index][nr] * 1000); +} + +static ssize_t +show_temp_hyst(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); + struct nct6683_data *data = nct6683_update_device(dev); + int nr = sattr->index; + int temp = data->temp[1][nr] - data->temp[2][nr]; + + return sprintf(buf, "%d\n", temp * 1000); +} + +static ssize_t +show_temp16(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); + struct nct6683_data *data = nct6683_update_device(dev); + int index = sattr->index; + + return sprintf(buf, "%d\n", (data->temp_in[index] / 128) * 500); +} + +/* + * Temperature sensor type is determined by temperature source + * and can not be modified. + * 0x02..0x07: Thermal diode + * 0x08..0x18: Thermistor + * 0x20..0x2b: Intel PECI + * 0x42..0x49: AMD TSI + * Others are unspecified (not visible) + */ + +static int get_temp_type(u8 src) +{ + if (src >= 0x02 && src <= 0x07) + return 3; /* thermal diode */ + else if (src >= 0x08 && src <= 0x18) + return 4; /* thermistor */ + else if (src >= 0x20 && src <= 0x2b) + return 6; /* PECI */ + else if (src >= 0x42 && src <= 0x49) + return 5; + + return 0; +} + +static ssize_t +show_temp_type(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct nct6683_data *data = nct6683_update_device(dev); + struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); + int nr = sattr->index; + return sprintf(buf, "%d\n", get_temp_type(data->temp_src[nr])); +} + +static umode_t nct6683_temp_is_visible(struct kobject *kobj, + struct attribute *attr, int index) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nct6683_data *data = dev_get_drvdata(dev); + int temp = index / 7; /* temp index */ + int nr = index % 7; /* attribute index */ + + /* + * Intel does not have low temperature limits or temperature hysteresis + * registers, or at least register location and encoding is unknown. + */ + if ((nr == 2 || nr == 4) && + data->customer_id == NCT6683_CUSTOMER_ID_INTEL) + return 0; + + if (nr == 6 && get_temp_type(data->temp_src[temp]) == 0) + return 0; /* type */ + + return attr->mode; +} + +SENSOR_TEMPLATE(temp_input, "temp%d_input", S_IRUGO, show_temp16, NULL, 0); +SENSOR_TEMPLATE(temp_label, "temp%d_label", S_IRUGO, show_temp_label, NULL, 0); +SENSOR_TEMPLATE_2(temp_min, "temp%d_min", S_IRUGO, show_temp8, NULL, 0, 0); +SENSOR_TEMPLATE_2(temp_max, "temp%d_max", S_IRUGO, show_temp8, NULL, 0, 1); +SENSOR_TEMPLATE(temp_max_hyst, "temp%d_max_hyst", S_IRUGO, show_temp_hyst, NULL, + 0); +SENSOR_TEMPLATE_2(temp_crit, "temp%d_crit", S_IRUGO, show_temp8, NULL, 0, 3); +SENSOR_TEMPLATE(temp_type, "temp%d_type", S_IRUGO, show_temp_type, NULL, 0); + +/* + * nct6683_temp_is_visible uses the index into the following array + * to determine if attributes should be created or not. + * Any change in order or content must be matched. + */ +static struct sensor_device_template *nct6683_attributes_temp_template[] = { + &sensor_dev_template_temp_input, + &sensor_dev_template_temp_label, + &sensor_dev_template_temp_min, /* 2 */ + &sensor_dev_template_temp_max, /* 3 */ + &sensor_dev_template_temp_max_hyst, /* 4 */ + &sensor_dev_template_temp_crit, /* 5 */ + &sensor_dev_template_temp_type, /* 6 */ + NULL +}; + +static struct sensor_template_group nct6683_temp_template_group = { + .templates = nct6683_attributes_temp_template, + .is_visible = nct6683_temp_is_visible, + .base = 1, +}; + +static ssize_t +show_pwm(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct nct6683_data *data = nct6683_update_device(dev); + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int index = sattr->index; + + return sprintf(buf, "%d\n", data->pwm[index]); +} + +SENSOR_TEMPLATE(pwm, "pwm%d", S_IRUGO, show_pwm, NULL, 0); + +static umode_t nct6683_pwm_is_visible(struct kobject *kobj, + struct attribute *attr, int index) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nct6683_data *data = dev_get_drvdata(dev); + int pwm = index; /* pwm index */ + + if (!(data->have_pwm & (1 << pwm))) + return 0; + + return attr->mode; +} + +static struct sensor_device_template *nct6683_attributes_pwm_template[] = { + &sensor_dev_template_pwm, + NULL +}; + +static struct sensor_template_group nct6683_pwm_template_group = { + .templates = nct6683_attributes_pwm_template, + .is_visible = nct6683_pwm_is_visible, + .base = 1, +}; + +static ssize_t +show_global_beep(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct nct6683_data *data = dev_get_drvdata(dev); + int ret; + u8 reg; + + mutex_lock(&data->update_lock); + + ret = superio_enter(data->sioreg); + if (ret) + goto error; + superio_select(data->sioreg, NCT6683_LD_HWM); + reg = superio_inb(data->sioreg, NCT6683_REG_CR_BEEP); + superio_exit(data->sioreg); + + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%u\n", !!(reg & NCT6683_CR_BEEP_MASK)); + +error: + mutex_unlock(&data->update_lock); + return ret; +} + +static ssize_t +store_global_beep(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct nct6683_data *data = dev_get_drvdata(dev); + unsigned long val; + u8 reg; + int ret; + + if (kstrtoul(buf, 10, &val) || (val != 0 && val != 1)) + return -EINVAL; + + mutex_lock(&data->update_lock); + + ret = superio_enter(data->sioreg); + if (ret) { + count = ret; + goto error; + } + + superio_select(data->sioreg, NCT6683_LD_HWM); + reg = superio_inb(data->sioreg, NCT6683_REG_CR_BEEP); + if (val) + reg |= NCT6683_CR_BEEP_MASK; + else + reg &= ~NCT6683_CR_BEEP_MASK; + superio_outb(data->sioreg, NCT6683_REG_CR_BEEP, reg); + superio_exit(data->sioreg); +error: + mutex_unlock(&data->update_lock); + return count; +} + +/* Case open detection */ + +static ssize_t +show_caseopen(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct nct6683_data *data = dev_get_drvdata(dev); + int ret; + u8 reg; + + mutex_lock(&data->update_lock); + + ret = superio_enter(data->sioreg); + if (ret) + goto error; + superio_select(data->sioreg, NCT6683_LD_ACPI); + reg = superio_inb(data->sioreg, NCT6683_REG_CR_CASEOPEN); + superio_exit(data->sioreg); + + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%u\n", !(reg & NCT6683_CR_CASEOPEN_MASK)); + +error: + mutex_unlock(&data->update_lock); + return ret; +} + +static ssize_t +clear_caseopen(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct nct6683_data *data = dev_get_drvdata(dev); + unsigned long val; + u8 reg; + int ret; + + if (kstrtoul(buf, 10, &val) || val != 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + + /* + * Use CR registers to clear caseopen status. + * Caseopen is activ low, clear by writing 1 into the register. + */ + + ret = superio_enter(data->sioreg); + if (ret) { + count = ret; + goto error; + } + + superio_select(data->sioreg, NCT6683_LD_ACPI); + reg = superio_inb(data->sioreg, NCT6683_REG_CR_CASEOPEN); + reg |= NCT6683_CR_CASEOPEN_MASK; + superio_outb(data->sioreg, NCT6683_REG_CR_CASEOPEN, reg); + reg &= ~NCT6683_CR_CASEOPEN_MASK; + superio_outb(data->sioreg, NCT6683_REG_CR_CASEOPEN, reg); + superio_exit(data->sioreg); + + data->valid = false; /* Force cache refresh */ +error: + mutex_unlock(&data->update_lock); + return count; +} + +static DEVICE_ATTR(intrusion0_alarm, S_IWUSR | S_IRUGO, show_caseopen, + clear_caseopen); +static DEVICE_ATTR(beep_enable, S_IWUSR | S_IRUGO, show_global_beep, + store_global_beep); + +static struct attribute *nct6683_attributes_other[] = { + &dev_attr_intrusion0_alarm.attr, + &dev_attr_beep_enable.attr, + NULL +}; + +static const struct attribute_group nct6683_group_other = { + .attrs = nct6683_attributes_other, +}; + +/* Get the monitoring functions started */ +static inline void nct6683_init_device(struct nct6683_data *data) +{ + u8 tmp; + + /* Start hardware monitoring if needed */ + tmp = nct6683_read(data, NCT6683_HWM_CFG); + if (!(tmp & 0x80)) + nct6683_write(data, NCT6683_HWM_CFG, tmp | 0x80); +} + +/* + * There are a total of 24 fan inputs. Each can be configured as input + * or as output. A maximum of 16 inputs and 8 outputs is configurable. + */ +static void +nct6683_setup_fans(struct nct6683_data *data) +{ + int i; + u8 reg; + + for (i = 0; i < NCT6683_NUM_REG_FAN; i++) { + reg = nct6683_read(data, NCT6683_REG_FANIN_CFG(i)); + if (reg & 0x80) + data->have_fan |= 1 << i; + data->fanin_cfg[i] = reg; + } + for (i = 0; i < NCT6683_NUM_REG_PWM; i++) { + reg = nct6683_read(data, NCT6683_REG_FANOUT_CFG(i)); + if (reg & 0x80) + data->have_pwm |= 1 << i; + data->fanout_cfg[i] = reg; + } +} + +/* + * Translation from monitoring register to temperature and voltage attributes + * ========================================================================== + * + * There are a total of 32 monitoring registers. Each can be assigned to either + * a temperature or voltage monitoring source. + * NCT6683_REG_MON_CFG(x) defines assignment for each monitoring source. + * + * Temperature and voltage attribute mapping is determined by walking through + * the NCT6683_REG_MON_CFG registers. If the assigned source is + * a temperature, temp_index[n] is set to the monitor register index, and + * temp_src[n] is set to the temperature source. If the assigned source is + * a voltage, the respective values are stored in in_index[] and in_src[], + * respectively. + */ + +static void nct6683_setup_sensors(struct nct6683_data *data) +{ + u8 reg; + int i; + + data->temp_num = 0; + data->in_num = 0; + for (i = 0; i < NCT6683_NUM_REG_MON; i++) { + reg = nct6683_read(data, NCT6683_REG_MON_CFG(i)) & 0x7f; + /* Ignore invalid assignments */ + if (reg >= NUM_MON_LABELS) + continue; + /* Skip if disabled or reserved */ + if (nct6683_mon_label[reg] == NULL) + continue; + if (reg < MON_VOLTAGE_START) { + data->temp_index[data->temp_num] = i; + data->temp_src[data->temp_num] = reg; + data->temp_num++; + } else { + data->in_index[data->in_num] = i; + data->in_src[data->in_num] = reg; + data->in_num++; + } + } +} + +static int nct6683_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct nct6683_sio_data *sio_data = dev->platform_data; + struct attribute_group *group; + struct nct6683_data *data; + struct device *hwmon_dev; + struct resource *res; + int groups = 0; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!devm_request_region(dev, res->start, IOREGION_LENGTH, DRVNAME)) + return -EBUSY; + + data = devm_kzalloc(dev, sizeof(struct nct6683_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->kind = sio_data->kind; + data->sioreg = sio_data->sioreg; + data->addr = res->start; + mutex_init(&data->update_lock); + platform_set_drvdata(pdev, data); + + data->customer_id = nct6683_read16(data, NCT6683_REG_CUSTOMER_ID); + + nct6683_init_device(data); + nct6683_setup_fans(data); + nct6683_setup_sensors(data); + + /* Register sysfs hooks */ + + if (data->have_pwm) { + group = nct6683_create_attr_group(dev, + &nct6683_pwm_template_group, + fls(data->have_pwm)); + if (IS_ERR(group)) + return PTR_ERR(group); + data->groups[groups++] = group; + } + + if (data->in_num) { + group = nct6683_create_attr_group(dev, + &nct6683_in_template_group, + data->in_num); + if (IS_ERR(group)) + return PTR_ERR(group); + data->groups[groups++] = group; + } + + if (data->have_fan) { + group = nct6683_create_attr_group(dev, + &nct6683_fan_template_group, + fls(data->have_fan)); + if (IS_ERR(group)) + return PTR_ERR(group); + data->groups[groups++] = group; + } + + if (data->temp_num) { + group = nct6683_create_attr_group(dev, + &nct6683_temp_template_group, + data->temp_num); + if (IS_ERR(group)) + return PTR_ERR(group); + data->groups[groups++] = group; + } + data->groups[groups++] = &nct6683_group_other; + + dev_info(dev, "%s EC firmware version %d.%d build %02x/%02x/%02x\n", + nct6683_chip_names[data->kind], + nct6683_read(data, NCT6683_REG_VERSION_HI), + nct6683_read(data, NCT6683_REG_VERSION_LO), + nct6683_read(data, NCT6683_REG_BUILD_MONTH), + nct6683_read(data, NCT6683_REG_BUILD_DAY), + nct6683_read(data, NCT6683_REG_BUILD_YEAR)); + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, + nct6683_device_names[data->kind], data, data->groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +#ifdef CONFIG_PM +static int nct6683_suspend(struct device *dev) +{ + struct nct6683_data *data = nct6683_update_device(dev); + + mutex_lock(&data->update_lock); + data->hwm_cfg = nct6683_read(data, NCT6683_HWM_CFG); + mutex_unlock(&data->update_lock); + + return 0; +} + +static int nct6683_resume(struct device *dev) +{ + struct nct6683_data *data = dev_get_drvdata(dev); + + mutex_lock(&data->update_lock); + + nct6683_write(data, NCT6683_HWM_CFG, data->hwm_cfg); + + /* Force re-reading all values */ + data->valid = false; + mutex_unlock(&data->update_lock); + + return 0; +} + +static const struct dev_pm_ops nct6683_dev_pm_ops = { + .suspend = nct6683_suspend, + .resume = nct6683_resume, + .freeze = nct6683_suspend, + .restore = nct6683_resume, +}; + +#define NCT6683_DEV_PM_OPS (&nct6683_dev_pm_ops) +#else +#define NCT6683_DEV_PM_OPS NULL +#endif /* CONFIG_PM */ + +static struct platform_driver nct6683_driver = { + .driver = { + .owner = THIS_MODULE, + .name = DRVNAME, + .pm = NCT6683_DEV_PM_OPS, + }, + .probe = nct6683_probe, +}; + +static int __init nct6683_find(int sioaddr, struct nct6683_sio_data *sio_data) +{ + const char *board_vendor; + int addr; + u16 val; + int err; + + /* + * Only run on Intel boards unless the 'force' module parameter is set + */ + if (!force) { + board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + if (!board_vendor || strcmp(board_vendor, "Intel Corporation")) + return -ENODEV; + } + + err = superio_enter(sioaddr); + if (err) + return err; + + val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8) + | superio_inb(sioaddr, SIO_REG_DEVID + 1); + + switch (val & SIO_ID_MASK) { + case SIO_NCT6683_ID: + sio_data->kind = nct6683; + break; + default: + if (val != 0xffff) + pr_debug("unsupported chip ID: 0x%04x\n", val); + goto fail; + } + + /* We have a known chip, find the HWM I/O address */ + superio_select(sioaddr, NCT6683_LD_HWM); + val = (superio_inb(sioaddr, SIO_REG_ADDR) << 8) + | superio_inb(sioaddr, SIO_REG_ADDR + 1); + addr = val & IOREGION_ALIGNMENT; + if (addr == 0) { + pr_err("EC base I/O port unconfigured\n"); + goto fail; + } + + /* Activate logical device if needed */ + val = superio_inb(sioaddr, SIO_REG_ENABLE); + if (!(val & 0x01)) { + pr_err("EC is disabled\n"); + goto fail; + } + + superio_exit(sioaddr); + pr_info("Found %s or compatible chip at %#x:%#x\n", + nct6683_chip_names[sio_data->kind], sioaddr, addr); + sio_data->sioreg = sioaddr; + + return addr; + +fail: + superio_exit(sioaddr); + return -ENODEV; +} + +/* + * when Super-I/O functions move to a separate file, the Super-I/O + * bus will manage the lifetime of the device and this module will only keep + * track of the nct6683 driver. But since we use platform_device_alloc(), we + * must keep track of the device + */ +static struct platform_device *pdev[2]; + +static int __init sensors_nct6683_init(void) +{ + struct nct6683_sio_data sio_data; + int sioaddr[2] = { 0x2e, 0x4e }; + struct resource res; + bool found = false; + int address; + int i, err; + + err = platform_driver_register(&nct6683_driver); + if (err) + return err; + + /* + * initialize sio_data->kind and sio_data->sioreg. + * + * when Super-I/O functions move to a separate file, the Super-I/O + * driver will probe 0x2e and 0x4e and auto-detect the presence of a + * nct6683 hardware monitor, and call probe() + */ + for (i = 0; i < ARRAY_SIZE(pdev); i++) { + address = nct6683_find(sioaddr[i], &sio_data); + if (address <= 0) + continue; + + found = true; + + pdev[i] = platform_device_alloc(DRVNAME, address); + if (!pdev[i]) { + err = -ENOMEM; + goto exit_device_put; + } + + err = platform_device_add_data(pdev[i], &sio_data, + sizeof(struct nct6683_sio_data)); + if (err) + goto exit_device_put; + + memset(&res, 0, sizeof(res)); + res.name = DRVNAME; + res.start = address + IOREGION_OFFSET; + res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; + res.flags = IORESOURCE_IO; + + err = acpi_check_resource_conflict(&res); + if (err) { + platform_device_put(pdev[i]); + pdev[i] = NULL; + continue; + } + + err = platform_device_add_resources(pdev[i], &res, 1); + if (err) + goto exit_device_put; + + /* platform_device_add calls probe() */ + err = platform_device_add(pdev[i]); + if (err) + goto exit_device_put; + } + if (!found) { + err = -ENODEV; + goto exit_unregister; + } + + return 0; + +exit_device_put: + for (i = 0; i < ARRAY_SIZE(pdev); i++) { + if (pdev[i]) + platform_device_put(pdev[i]); + } +exit_unregister: + platform_driver_unregister(&nct6683_driver); + return err; +} + +static void __exit sensors_nct6683_exit(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pdev); i++) { + if (pdev[i]) + platform_device_unregister(pdev[i]); + } + platform_driver_unregister(&nct6683_driver); +} + +MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); +MODULE_DESCRIPTION("NCT6683D driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_nct6683_init); +module_exit(sensors_nct6683_exit); |