cpupowerutils - cpufrequtils extended with quite some features

CPU power consumption vs performance tuning is no longer
limited to CPU frequency switching anymore: deep sleep states,
traditional dynamic frequency scaling and hidden turbo/boost
frequencies are tied close together and depend on each other.
The first two exist on different architectures like PPC, Itanium and
ARM, the latter (so far) only on X86. On X86 the APU (CPU+GPU) will
only run most efficiently if CPU and GPU has proper power management
in place.

Users and Developers want to have *one* tool to get an overview what
their system supports and to monitor and debug CPU power management
in detail. The tool should compile and work on as many architectures
as possible.

Once this tool stabilizes a bit, it is intended to replace the
Intel-specific tools in tools/power/x86

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 273 insertions, 0 deletions

diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
new file mode 100644
index 000000000000..aef1e3b41792
--- /dev/null
+++ b/tools/power/cpupower/Makefile
@@ -0,0 +1,273 @@
+# Makefile for cpupowerutils
+#
+# Copyright (C) 2005,2006 Dominik Brodowski <linux@dominikbrodowski.net>
+#
+# Based largely on the Makefile for udev by:
+#
+# Copyright (C) 2003,2004 Greg Kroah-Hartman <greg@kroah.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+# --- CONFIGURATION BEGIN ---
+
+# Set the following to `true' to make a unstripped, unoptimized
+# binary. Leave this set to `false' for production use.
+DEBUG ?=	true
+
+# make the build silent. Set this to something else to make it noisy again.
+V ?=		false
+
+# Internationalization support (output in different languages).
+# Requires gettext.
+NLS ?=		true
+
+# Set the following to 'true' to build/install the
+# cpufreq-bench benchmarking tool
+CPUFRQ_BENCH ?= true
+
+# Prefix to the directories we're installing to
+DESTDIR ?=	
+
+# --- CONFIGURATION END ---
+
+
+
+# Package-related definitions. Distributions can modify the version
+# and _should_ modify the PACKAGE_BUGREPORT definition
+
+VERSION =			009p1
+LIB_MAJ=			0.0.0
+LIB_MIN=			0
+
+PACKAGE =			cpupowerutils
+PACKAGE_BUGREPORT =		cpufreq@vger.kernel.org
+LANGUAGES = 			de fr it cs pt
+
+
+# Directory definitions. These are default and most probably
+# do not need to be changed. Please note that DESTDIR is
+# added in front of any of them
+
+bindir ?=	/usr/bin
+sbindir ?=	/usr/sbin
+mandir ?=	/usr/man
+includedir ?=	/usr/include
+libdir ?=	/usr/lib
+localedir ?=	/usr/share/locale
+docdir ?=       /usr/share/doc/packages/cpupowerutils
+confdir ?=      /etc/
+
+# Toolchain: what tools do we use, and what options do they need:
+
+CP = cp -fpR
+INSTALL = /usr/bin/install -c
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_DATA  = ${INSTALL} -m 644
+INSTALL_SCRIPT = ${INSTALL_PROGRAM}
+
+# If you are running a cross compiler, you may want to set this
+# to something more interesting, like "arm-linux-".  If you want
+# to compile vs uClibc, that can be done here as well.
+CROSS = #/usr/i386-linux-uclibc/usr/bin/i386-uclibc-
+CC = $(CROSS)gcc
+LD = $(CROSS)gcc
+AR = $(CROSS)ar
+STRIP = $(CROSS)strip
+RANLIB = $(CROSS)ranlib
+HOSTCC = gcc
+
+
+# Now we set up the build system
+#
+
+# set up PWD so that older versions of make will work with our build.
+PWD = $(shell pwd)
+
+export CROSS CC AR STRIP RANLIB CFLAGS LDFLAGS LIB_OBJS
+
+# check if compiler option is supported
+cc-supports = ${shell if $(CC) ${1} -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; fi;}
+
+# use '-Os' optimization if available, else use -O2
+OPTIMIZATION := $(call cc-supports,-Os,-O2)
+
+WARNINGS := -Wall -Wchar-subscripts -Wpointer-arith -Wsign-compare
+WARNINGS += $(call cc-supports,-Wno-pointer-sign)
+WARNINGS += $(call cc-supports,-Wdeclaration-after-statement)
+WARNINGS += -Wshadow
+
+CPPFLAGS += -DVERSION=\"$(VERSION)\" -DPACKAGE=\"$(PACKAGE)\" \
+		-DPACKAGE_BUGREPORT=\"$(PACKAGE_BUGREPORT)\" -D_GNU_SOURCE
+
+UTIL_OBJS =  utils/helpers/amd.o utils/helpers/topology.o utils/helpers/msr.o \
+	utils/helpers/sysfs.o utils/helpers/misc.o utils/helpers/cpuid.o \
+	utils/helpers/pci.o utils/helpers/bitmask.o \
+	utils/idle_monitor/nhm_idle.o utils/idle_monitor/snb_idle.o \
+	utils/idle_monitor/amd_fam14h_idle.o utils/idle_monitor/cpuidle_sysfs.o \
+	utils/idle_monitor/mperf_monitor.o utils/idle_monitor/cpupower-monitor.o \
+	utils/cpupower.o utils/cpufreq-info.o utils/cpufreq-set.o \
+	utils/cpupower-set.o utils/cpupower-info.o utils/cpuidle-info.o
+
+UTIL_HEADERS = utils/helpers/helpers.h utils/idle_monitor/cpupower-monitor.h \
+	utils/helpers/bitmask.h \
+	utils/idle_monitor/idle_monitors.h utils/idle_monitor/idle_monitors.def
+
+UTIL_SRC := $(UTIL_OBJS:.o=.c)
+
+LIB_HEADERS = 	lib/cpufreq.h lib/sysfs.h
+LIB_SRC = 	lib/cpufreq.c lib/sysfs.c
+LIB_OBJS = 	lib/cpufreq.o lib/sysfs.o
+
+CFLAGS +=	-pipe
+
+ifeq ($(strip $(NLS)),true)
+	INSTALL_NLS += install-gmo
+	COMPILE_NLS += update-gmo
+endif
+
+ifeq ($(strip $(CPUFRQ_BENCH)),true)
+	INSTALL_BENCH += install-bench
+	COMPILE_BENCH += compile-bench
+endif
+
+CFLAGS += $(WARNINGS)
+
+ifeq ($(strip $(V)),false)
+	QUIET=@$(PWD)/build/ccdv
+	HOST_PROGS=build/ccdv
+else
+	QUIET=
+	HOST_PROGS=
+endif
+
+# if DEBUG is enabled, then we do not strip or optimize
+ifeq ($(strip $(DEBUG)),true)
+	CFLAGS += -O1 -g
+	CPPFLAGS += -DDEBUG
+	STRIPCMD = /bin/true -Since_we_are_debugging
+else
+	CFLAGS += $(OPTIMIZATION) -fomit-frame-pointer
+	STRIPCMD = $(STRIP) -s --remove-section=.note --remove-section=.comment
+endif
+
+
+# the actual make rules
+
+all: ccdv libcpufreq cpupower $(COMPILE_NLS) $(COMPILE_BENCH)
+
+ccdv: build/ccdv
+build/ccdv: build/ccdv.c
+	@echo "Building ccdv"
+	@$(HOSTCC) -O1 $< -o $@
+
+lib/%.o: $(LIB_SRC) $(LIB_HEADERS) build/ccdv
+	$(QUIET) $(CC) $(CPPFLAGS) $(CFLAGS) -fPIC -o $@ -c lib/$*.c
+
+libcpufreq.so.$(LIB_MAJ): $(LIB_OBJS)
+	$(QUIET) $(CC) -shared $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ \
+		-Wl,-soname,libcpufreq.so.$(LIB_MIN) $(LIB_OBJS)
+	@ln -sf $@ libcpufreq.so
+	@ln -sf $@ libcpufreq.so.$(LIB_MIN)
+
+libcpufreq: libcpufreq.so.$(LIB_MAJ)
+
+# Let all .o files depend on its .c file and all headers
+# Might be worth to put this into utils/Makefile at some point of time
+$(UTIL_OBJS): $(UTIL_HEADERS)
+
+.c.o:
+	$(QUIET) $(CC) $(CFLAGS) $(CPPFLAGS) -I./lib -I ./utils -o $@ -c $*.c
+
+cpupower: $(UTIL_OBJS) libcpufreq
+	$(QUIET) $(CC) $(CFLAGS) $(LDFLAGS) -lcpufreq -lrt -lpci -L. -o $@ $(UTIL_OBJS)
+	$(STRIPCMD) $@
+
+po/$(PACKAGE).pot: $(UTIL_SRC)
+	@xgettext --default-domain=$(PACKAGE) --add-comments \
+		--keyword=_ --keyword=N_ $(UTIL_SRC) && \
+	test -f $(PACKAGE).po && \
+	mv -f $(PACKAGE).po po/$(PACKAGE).pot
+
+update-gmo: po/$(PACKAGE).pot
+	 @for HLANG in $(LANGUAGES); do \
+		echo -n "Translating $$HLANG "; \
+		if msgmerge po/$$HLANG.po po/$(PACKAGE).pot -o \
+		   po/$$HLANG.new.po; then \
+			mv -f po/$$HLANG.new.po po/$$HLANG.po; \
+		else \
+			echo "msgmerge for $$HLANG failed!"; \
+			rm -f po/$$HLANG.new.po; \
+		fi; \
+		msgfmt --statistics -o po/$$HLANG.gmo po/$$HLANG.po; \
+	done;
+
+compile-bench: libcpufreq.so.$(LIB_MAJ)
+	@V=$(V) confdir=$(confdir) $(MAKE) -C bench
+
+clean:
+	-find . \( -not -type d \) -and \( -name '*~' -o -name '*.[oas]' \) -type f -print \
+	 | xargs rm -f
+	-rm -f $(UTIL_BINS)
+	-rm -f $(IDLE_OBJS)
+	-rm -f cpupower
+	-rm -f libcpufreq.so*
+	-rm -f build/ccdv
+	-rm -rf po/*.gmo po/*.pot
+	$(MAKE) -C bench clean
+
+
+install-lib:
+	$(INSTALL) -d $(DESTDIR)${libdir}
+	$(CP) libcpufreq.so* $(DESTDIR)${libdir}/
+	$(INSTALL) -d $(DESTDIR)${includedir}
+	$(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h
+
+install-tools:
+	$(INSTALL) -d $(DESTDIR)${bindir}
+	$(INSTALL_PROGRAM) cpupower $(DESTDIR)${bindir}
+
+install-man:
+	$(INSTALL_DATA) -D man/cpupower.1 $(DESTDIR)${mandir}/man1/cpupower.1
+	$(INSTALL_DATA) -D man/cpupower-frequency-set.1 $(DESTDIR)${mandir}/man1/cpupower-frequency-set.1
+	$(INSTALL_DATA) -D man/cpupower-frequency-info.1 $(DESTDIR)${mandir}/man1/cpupower-frequency-info.1
+	$(INSTALL_DATA) -D man/cpupower-set.1 $(DESTDIR)${mandir}/man1/cpupower-set.1
+	$(INSTALL_DATA) -D man/cpupower-info.1 $(DESTDIR)${mandir}/man1/cpupower-info.1
+	$(INSTALL_DATA) -D man/cpupower-monitor.1 $(DESTDIR)${mandir}/man1/cpupower-monitor.1
+
+install-gmo:
+	$(INSTALL) -d $(DESTDIR)${localedir}
+	for HLANG in $(LANGUAGES); do \
+		echo '$(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupowerutils.mo'; \
+		$(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupowerutils.mo; \
+	done;
+
+install-bench:
+	@#DESTDIR must be set from outside to survive
+	@sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench install
+       
+install: all install-lib install-tools install-man $(INSTALL_NLS) $(INSTALL_BENCH)
+
+uninstall:
+	- rm -f $(DESTDIR)${libdir}/libcpufreq.*
+	- rm -f $(DESTDIR)${includedir}/cpufreq.h
+	- rm -f $(DESTDIR)${bindir}/utils/cpupower
+	- rm -f $(DESTDIR)${mandir}/man1/cpufreq-set.1
+	- rm -f $(DESTDIR)${mandir}/man1/cpufreq-info.1
+	- for HLANG in $(LANGUAGES); do \
+		rm -f $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupowerutils.mo; \
+	  done;
+
+.PHONY: all utils libcpufreq ccdv update-po update-gmo install-lib install-tools install-man install-gmo install uninstall \
+	clean