genirq: add threaded interrupt handler support

Add support for threaded interrupt handlers:

A device driver can request that its main interrupt handler runs in a
thread. To achive this the device driver requests the interrupt with
request_threaded_irq() and provides additionally to the handler a
thread function. The handler function is called in hard interrupt
context and needs to check whether the interrupt originated from the
device. If the interrupt originated from the device then the handler
can either return IRQ_HANDLED or IRQ_WAKE_THREAD. IRQ_HANDLED is
returned when no further action is required. IRQ_WAKE_THREAD causes
the genirq code to invoke the threaded (main) handler. When
IRQ_WAKE_THREAD is returned handler must have disabled the interrupt
on the device level. This is mandatory for shared interrupt handlers,
but we need to do it as well for obscure x86 hardware where disabling
an interrupt on the IO_APIC level redirects the interrupt to the
legacy PIC interrupt lines.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

2 files changed, 209 insertions, 14 deletions

diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 9ebf77968871..fe8f45374e86 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -357,8 +357,37 @@ irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action)
 
 	do {
 		ret = action->handler(irq, action->dev_id);
-		if (ret == IRQ_HANDLED)
+
+		switch (ret) {
+		case IRQ_WAKE_THREAD:
+			/*
+			 * Wake up the handler thread for this
+			 * action. In case the thread crashed and was
+			 * killed we just pretend that we handled the
+			 * interrupt. The hardirq handler above has
+			 * disabled the device interrupt, so no irq
+			 * storm is lurking.
+			 */
+			if (likely(!test_bit(IRQTF_DIED,
+					     &action->thread_flags))) {
+				set_bit(IRQTF_RUNTHREAD, &action->thread_flags);
+				wake_up_process(action->thread);
+			}
+
+			/*
+			 * Set it to handled so the spurious check
+			 * does not trigger.
+			 */
+			ret = IRQ_HANDLED;
+			/* Fall through to add to randomness */
+		case IRQ_HANDLED:
 			status |= action->flags;
+			break;
+
+		default:
+			break;
+		}
+
 		retval |= ret;
 		action = action->next;
 	} while (action);
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 6458e99984c0..a4c1ab86cd25 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -8,16 +8,15 @@
  */
 
 #include <linux/irq.h>
+#include <linux/kthread.h>
 #include <linux/module.h>
 #include <linux/random.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/sched.h>
 
 #include "internals.h"
 
-#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
-cpumask_var_t irq_default_affinity;
-
 /**
  *	synchronize_irq - wait for pending IRQ handlers (on other CPUs)
  *	@irq: interrupt number to wait for
@@ -53,9 +52,18 @@ void synchronize_irq(unsigned int irq)
 
 		/* Oops, that failed? */
 	} while (status & IRQ_INPROGRESS);
+
+	/*
+	 * We made sure that no hardirq handler is running. Now verify
+	 * that no threaded handlers are active.
+	 */
+	wait_event(desc->wait_for_threads, !atomic_read(&desc->threads_active));
 }
 EXPORT_SYMBOL(synchronize_irq);
 
+#ifdef CONFIG_SMP
+cpumask_var_t irq_default_affinity;
+
 /**
  *	irq_can_set_affinity - Check if the affinity of a given irq can be set
  *	@irq:		Interrupt to check
@@ -72,6 +80,18 @@ int irq_can_set_affinity(unsigned int irq)
 	return 1;
 }
 
+static void
+irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask)
+{
+	struct irqaction *action = desc->action;
+
+	while (action) {
+		if (action->thread)
+			set_cpus_allowed_ptr(action->thread, cpumask);
+		action = action->next;
+	}
+}
+
 /**
  *	irq_set_affinity - Set the irq affinity of a given irq
  *	@irq:		Interrupt to set affinity
@@ -100,6 +120,7 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 	cpumask_copy(desc->affinity, cpumask);
 	desc->chip->set_affinity(irq, cpumask);
 #endif
+	irq_set_thread_affinity(desc, cpumask);
 	desc->status |= IRQ_AFFINITY_SET;
 	spin_unlock_irqrestore(&desc->lock, flags);
 	return 0;
@@ -150,6 +171,8 @@ int irq_select_affinity_usr(unsigned int irq)
 
 	spin_lock_irqsave(&desc->lock, flags);
 	ret = setup_affinity(irq, desc);
+	if (!ret)
+		irq_set_thread_affinity(desc, desc->affinity);
 	spin_unlock_irqrestore(&desc->lock, flags);
 
 	return ret;
@@ -384,6 +407,93 @@ int __irq_set_trigger(struct irq_desc *desc, unsigned int irq,
 	return ret;
 }
 
+static inline int irq_thread_should_run(struct irqaction *action)
+{
+	return test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags);
+}
+
+static int irq_wait_for_interrupt(struct irqaction *action)
+{
+	while (!kthread_should_stop()) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (irq_thread_should_run(action)) {
+			__set_current_state(TASK_RUNNING);
+			return 0;
+		} else
+			schedule();
+	}
+	return -1;
+}
+
+/*
+ * Interrupt handler thread
+ */
+static int irq_thread(void *data)
+{
+	struct sched_param param = { .sched_priority = MAX_USER_RT_PRIO/2, };
+	struct irqaction *action = data;
+	struct irq_desc *desc = irq_to_desc(action->irq);
+	int wake;
+
+	sched_setscheduler(current, SCHED_FIFO, &param);
+	current->irqaction = action;
+
+	while (!irq_wait_for_interrupt(action)) {
+
+		atomic_inc(&desc->threads_active);
+
+		spin_lock_irq(&desc->lock);
+		if (unlikely(desc->status & IRQ_DISABLED)) {
+			/*
+			 * CHECKME: We might need a dedicated
+			 * IRQ_THREAD_PENDING flag here, which
+			 * retriggers the thread in check_irq_resend()
+			 * but AFAICT IRQ_PENDING should be fine as it
+			 * retriggers the interrupt itself --- tglx
+			 */
+			desc->status |= IRQ_PENDING;
+			spin_unlock_irq(&desc->lock);
+		} else {
+			spin_unlock_irq(&desc->lock);
+
+			action->thread_fn(action->irq, action->dev_id);
+		}
+
+		wake = atomic_dec_and_test(&desc->threads_active);
+
+		if (wake && waitqueue_active(&desc->wait_for_threads))
+			wake_up(&desc->wait_for_threads);
+	}
+
+	/*
+	 * Clear irqaction. Otherwise exit_irq_thread() would make
+	 * fuzz about an active irq thread going into nirvana.
+	 */
+	current->irqaction = NULL;
+	return 0;
+}
+
+/*
+ * Called from do_exit()
+ */
+void exit_irq_thread(void)
+{
+	struct task_struct *tsk = current;
+
+	if (!tsk->irqaction)
+		return;
+
+	printk(KERN_ERR
+	       "exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",
+	       tsk->comm ? tsk->comm : "", tsk->pid, tsk->irqaction->irq);
+
+	/*
+	 * Set the THREAD DIED flag to prevent further wakeups of the
+	 * soon to be gone threaded handler.
+	 */
+	set_bit(IRQTF_DIED, &tsk->irqaction->flags);
+}
+
 /*
  * Internal function to register an irqaction - typically used to
  * allocate special interrupts that are part of the architecture.
@@ -420,6 +530,26 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
 	}
 
 	/*
+	 * Threaded handler ?
+	 */
+	if (new->thread_fn) {
+		struct task_struct *t;
+
+		t = kthread_create(irq_thread, new, "irq/%d-%s", irq,
+				   new->name);
+		if (IS_ERR(t))
+			return PTR_ERR(t);
+		/*
+		 * We keep the reference to the task struct even if
+		 * the thread dies to avoid that the interrupt code
+		 * references an already freed task_struct.
+		 */
+		get_task_struct(t);
+		new->thread = t;
+		wake_up_process(t);
+	}
+
+	/*
 	 * The following block of code has to be executed atomically
 	 */
 	spin_lock_irqsave(&desc->lock, flags);
@@ -456,15 +586,15 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
 	if (!shared) {
 		irq_chip_set_defaults(desc->chip);
 
+		init_waitqueue_head(&desc->wait_for_threads);
+
 		/* Setup the type (level, edge polarity) if configured: */
 		if (new->flags & IRQF_TRIGGER_MASK) {
 			ret = __irq_set_trigger(desc, irq,
 					new->flags & IRQF_TRIGGER_MASK);
 
-			if (ret) {
-				spin_unlock_irqrestore(&desc->lock, flags);
-				return ret;
-			}
+			if (ret)
+				goto out_thread;
 		} else
 			compat_irq_chip_set_default_handler(desc);
 #if defined(CONFIG_IRQ_PER_CPU)
@@ -532,8 +662,19 @@ mismatch:
 		dump_stack();
 	}
 #endif
+	ret = -EBUSY;
+
+out_thread:
 	spin_unlock_irqrestore(&desc->lock, flags);
-	return -EBUSY;
+	if (new->thread) {
+		struct task_struct *t = new->thread;
+
+		new->thread = NULL;
+		if (likely(!test_bit(IRQTF_DIED, &new->thread_flags)))
+			kthread_stop(t);
+		put_task_struct(t);
+	}
+	return ret;
 }
 
 /**
@@ -559,6 +700,7 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
 	struct irqaction *action, **action_ptr;
+	struct task_struct *irqthread;
 	unsigned long flags;
 
 	WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
@@ -605,6 +747,10 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
 		else
 			desc->chip->disable(irq);
 	}
+
+	irqthread = action->thread;
+	action->thread = NULL;
+
 	spin_unlock_irqrestore(&desc->lock, flags);
 
 	unregister_handler_proc(irq, action);
@@ -612,6 +758,12 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
 	/* Make sure it's not being used on another CPU: */
 	synchronize_irq(irq);
 
+	if (irqthread) {
+		if (!test_bit(IRQTF_DIED, &action->thread_flags))
+			kthread_stop(irqthread);
+		put_task_struct(irqthread);
+	}
+
 #ifdef CONFIG_DEBUG_SHIRQ
 	/*
 	 * It's a shared IRQ -- the driver ought to be prepared for an IRQ
@@ -664,9 +816,12 @@ void free_irq(unsigned int irq, void *dev_id)
 EXPORT_SYMBOL(free_irq);
 
 /**
- *	request_irq - allocate an interrupt line
+ *	request_threaded_irq - allocate an interrupt line
  *	@irq: Interrupt line to allocate
- *	@handler: Function to be called when the IRQ occurs
+ *	@handler: Function to be called when the IRQ occurs.
+ *		  Primary handler for threaded interrupts
+ *      @thread_fn: Function called from the irq handler thread
+ *                  If NULL, no irq thread is created
  *	@irqflags: Interrupt type flags
  *	@devname: An ascii name for the claiming device
  *	@dev_id: A cookie passed back to the handler function
@@ -678,6 +833,15 @@ EXPORT_SYMBOL(free_irq);
  *	raises, you must take care both to initialise your hardware
  *	and to set up the interrupt handler in the right order.
  *
+ *	If you want to set up a threaded irq handler for your device
+ *	then you need to supply @handler and @thread_fn. @handler ist
+ *	still called in hard interrupt context and has to check
+ *	whether the interrupt originates from the device. If yes it
+ *	needs to disable the interrupt on the device and return
+ *	IRQ_THREAD_WAKE which will wake up the handler thread and run
+ *	@thread_fn. This split handler design is necessary to support
+ *	shared interrupts.
+ *
  *	Dev_id must be globally unique. Normally the address of the
  *	device data structure is used as the cookie. Since the handler
  *	receives this value it makes sense to use it.
@@ -693,8 +857,9 @@ EXPORT_SYMBOL(free_irq);
  *	IRQF_TRIGGER_*		Specify active edge(s) or level
  *
  */
-int request_irq(unsigned int irq, irq_handler_t handler,
-		unsigned long irqflags, const char *devname, void *dev_id)
+int request_threaded_irq(unsigned int irq, irq_handler_t handler,
+			 irq_handler_t thread_fn, unsigned long irqflags,
+			 const char *devname, void *dev_id)
 {
 	struct irqaction *action;
 	struct irq_desc *desc;
@@ -742,6 +907,7 @@ int request_irq(unsigned int irq, irq_handler_t handler,
 		return -ENOMEM;
 
 	action->handler = handler;
+	action->thread_fn = thread_fn;
 	action->flags = irqflags;
 	action->name = devname;
 	action->dev_id = dev_id;
@@ -771,4 +937,4 @@ int request_irq(unsigned int irq, irq_handler_t handler,
 #endif
 	return retval;
 }
-EXPORT_SYMBOL(request_irq);
+EXPORT_SYMBOL(request_threaded_irq);