Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (260 commits)
  usb: renesas_usbhs: fixup inconsistent return from usbhs_pkt_push()
  usb/isp1760: Allow to optionally trigger low-level chip reset via GPIOLIB.
  USB: gadget: midi: memory leak in f_midi_bind_config()
  USB: gadget: midi: fix range check in f_midi_out_open()
  QE/FHCI: fixed the CONTROL bug
  usb: renesas_usbhs: tidyup for smatch warnings
  USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platforms
  EHCI: workaround for MosChip controller bug
  usb: gadget: file_storage: fix race on unloading
  USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers
  USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio
  usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF .
  USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board
  USB: Fix runtime wakeup on OHCI
  xHCI/USB: Make xHCI driver have a BOS descriptor.
  usb: gadget: add new usb gadget for ACM and mass storage
  ...

9 files changed, 225 insertions, 5 deletions

diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h
new file mode 100644
index 000000000000..ada401244e0b
--- /dev/null
+++ b/include/linux/platform_data/dwc3-omap.h
@@ -0,0 +1,47 @@
+/**
+ * dwc3-omap.h - OMAP Specific Glue layer, header.
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+enum dwc3_omap_utmi_mode {
+	DWC3_OMAP_UTMI_MODE_UNKNOWN = 0,
+	DWC3_OMAP_UTMI_MODE_HW,
+	DWC3_OMAP_UTMI_MODE_SW,
+};
+
+struct dwc3_omap_data {
+	enum dwc3_omap_utmi_mode	utmi_mode;
+};
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
new file mode 100644
index 000000000000..e9d9149ddf38
--- /dev/null
+++ b/include/linux/platform_data/mv_usb.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MV_PLATFORM_USB_H
+#define __MV_PLATFORM_USB_H
+
+enum pxa_ehci_type {
+	EHCI_UNDEFINED = 0,
+	PXA_U2OEHCI,	/* pxa 168, 9xx */
+	PXA_SPH,	/* pxa 168, 9xx SPH */
+	MMP3_HSIC,	/* mmp3 hsic */
+	MMP3_FSIC,	/* mmp3 fsic */
+};
+
+enum {
+	MV_USB_MODE_OTG,
+	MV_USB_MODE_HOST,
+};
+
+enum {
+	VBUS_LOW	= 0,
+	VBUS_HIGH	= 1 << 0,
+};
+
+struct mv_usb_addon_irq {
+	unsigned int	irq;
+	int		(*poll)(void);
+};
+
+struct mv_usb_platform_data {
+	unsigned int		clknum;
+	char			**clkname;
+	struct mv_usb_addon_irq	*id;	/* Only valid for OTG. ID pin change*/
+	struct mv_usb_addon_irq	*vbus;	/* valid for OTG/UDC. VBUS change*/
+
+	/* only valid for HCD. OTG or Host only*/
+	unsigned int		mode;
+
+	int     (*phy_init)(unsigned int regbase);
+	void    (*phy_deinit)(unsigned int regbase);
+	int	(*set_vbus)(unsigned int vbus);
+};
+
+#endif
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 41d0237fd449..600eb0a6f89a 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2165,7 +2165,8 @@ extern int force_sigsegv(int, struct task_struct *);
 extern int force_sig_info(int, struct siginfo *, struct task_struct *);
 extern int __kill_pgrp_info(int sig, struct siginfo *info, struct pid *pgrp);
 extern int kill_pid_info(int sig, struct siginfo *info, struct pid *pid);
-extern int kill_pid_info_as_uid(int, struct siginfo *, struct pid *, uid_t, uid_t, u32);
+extern int kill_pid_info_as_cred(int, struct siginfo *, struct pid *,
+				const struct cred *, u32);
 extern int kill_pgrp(struct pid *pid, int sig, int priv);
 extern int kill_pid(struct pid *pid, int sig, int priv);
 extern int kill_proc_info(int, struct siginfo *, pid_t);
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 73c7df489607..6f49a1b39fa6 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -292,6 +292,16 @@ struct usb_host_config {
 	int extralen;
 };
 
+/* USB2.0 and USB3.0 device BOS descriptor set */
+struct usb_host_bos {
+	struct usb_bos_descriptor	*desc;
+
+	/* wireless cap descriptor is handled by wusb */
+	struct usb_ext_cap_descriptor	*ext_cap;
+	struct usb_ss_cap_descriptor	*ss_cap;
+	struct usb_ss_container_id_descriptor	*ss_id;
+};
+
 int __usb_get_extra_descriptor(char *buffer, unsigned size,
 	unsigned char type, void **ptr);
 #define usb_get_extra_descriptor(ifpoint, type, ptr) \
@@ -381,6 +391,7 @@ struct usb_tt;
  * @ep0: endpoint 0 data (default control pipe)
  * @dev: generic device interface
  * @descriptor: USB device descriptor
+ * @bos: USB device BOS descriptor set
  * @config: all of the device's configs
  * @actconfig: the active configuration
  * @ep_in: array of IN endpoints
@@ -399,6 +410,9 @@ struct usb_tt;
  *	FIXME -- complete doc
  * @authenticated: Crypto authentication passed
  * @wusb: device is Wireless USB
+ * @lpm_capable: device supports LPM
+ * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM
+ * @usb2_hw_lpm_enabled: USB2 hardware LPM enabled
  * @string_langid: language ID for strings
  * @product: iProduct string, if present (static)
  * @manufacturer: iManufacturer string, if present (static)
@@ -442,6 +456,7 @@ struct usb_device {
 	struct device dev;
 
 	struct usb_device_descriptor descriptor;
+	struct usb_host_bos *bos;
 	struct usb_host_config *config;
 
 	struct usb_host_config *actconfig;
@@ -460,6 +475,9 @@ struct usb_device {
 	unsigned authorized:1;
 	unsigned authenticated:1;
 	unsigned wusb:1;
+	unsigned lpm_capable:1;
+	unsigned usb2_hw_lpm_capable:1;
+	unsigned usb2_hw_lpm_enabled:1;
 	int string_langid;
 
 	/* static strings from the device */
@@ -1574,7 +1592,7 @@ usb_maxpacket(struct usb_device *udev, int pipe, int is_out)
 		return 0;
 
 	/* NOTE:  only 0x07ff bits are for packet size... */
-	return le16_to_cpu(ep->desc.wMaxPacketSize);
+	return usb_endpoint_maxp(&ep->desc);
 }
 
 /* ----------------------------------------------------------------------- */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 0fd3fbdd8283..f32a64e57f97 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -34,6 +34,7 @@
 #define __LINUX_USB_CH9_H
 
 #include <linux/types.h>	/* __u8 etc */
+#include <asm/byteorder.h>	/* le16_to_cpu */
 
 /*-------------------------------------------------------------------------*/
 
@@ -143,6 +144,11 @@
 #define USB_INTRF_FUNC_SUSPEND	0	/* function suspend */
 
 #define USB_INTR_FUNC_SUSPEND_OPT_MASK	0xFF00
+/*
+ * Suspend Options, Table 9-7 USB 3.0 spec
+ */
+#define USB_INTRF_FUNC_SUSPEND_LP	(1 << (8 + 0))
+#define USB_INTRF_FUNC_SUSPEND_RW	(1 << (8 + 1))
 
 #define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
 
@@ -570,6 +576,17 @@ static inline int usb_endpoint_is_isoc_out(
 	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
 }
 
+/**
+ * usb_endpoint_maxp - get endpoint's max packet size
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's max packet
+ */
+static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
+{
+	return le16_to_cpu(epd->wMaxPacketSize);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
@@ -851,6 +868,18 @@ enum usb_device_speed {
 	USB_SPEED_SUPER,			/* usb 3.0 */
 };
 
+#ifdef __KERNEL__
+
+/**
+ * usb_speed_string() - Returns human readable-name of the speed.
+ * @speed: The speed to return human-readable name for.  If it's not
+ *   any of the speeds defined in usb_device_speed enum, string for
+ *   USB_SPEED_UNKNOWN will be returned.
+ */
+extern const char *usb_speed_string(enum usb_device_speed speed);
+
+#endif
+
 enum usb_device_state {
 	/* NOTATTACHED isn't in the USB spec, and this state acts
 	 * the same as ATTACHED ... but it's clearer this way.
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 087f4b931833..1d3a67523ffc 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -437,9 +437,9 @@ static inline void usb_ep_fifo_flush(struct usb_ep *ep)
 
 struct usb_dcd_config_params {
 	__u8  bU1devExitLat;	/* U1 Device exit Latency */
-#define USB_DEFULT_U1_DEV_EXIT_LAT	0x01	/* Less then 1 microsec */
+#define USB_DEFAULT_U1_DEV_EXIT_LAT	0x01	/* Less then 1 microsec */
 	__le16 bU2DevExitLat;	/* U2 Device exit Latency */
-#define USB_DEFULT_U2_DEV_EXIT_LAT	0x1F4	/* Less then 500 microsec */
+#define USB_DEFAULT_U2_DEV_EXIT_LAT	0x1F4	/* Less then 500 microsec */
 };
 
 
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 0097136ba45d..03354d557b79 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -178,7 +178,7 @@ struct usb_hcd {
 	 * this structure.
 	 */
 	unsigned long hcd_priv[0]
-			__attribute__ ((aligned(sizeof(unsigned long))));
+			__attribute__ ((aligned(sizeof(s64))));
 };
 
 /* 2.4 does this a bit differently ... */
@@ -343,6 +343,7 @@ struct hc_driver {
 		 * address is set
 		 */
 	int	(*update_device)(struct usb_hcd *, struct usb_device *);
+	int	(*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
 };
 
 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h
index b6b8660d0c68..55805f9dcf21 100644
--- a/include/linux/usb/r8a66597.h
+++ b/include/linux/usb/r8a66597.h
@@ -48,6 +48,9 @@ struct r8a66597_platdata {
 
 	/* (external controller only) set one = WR0_N shorted to WR1_N */
 	unsigned	wr0_shorted_to_wr1:1;
+
+	/* set one = using SUDMAC */
+	unsigned	sudmac:1;
 };
 
 /* Register definitions */
@@ -417,5 +420,62 @@ struct r8a66597_platdata {
 #define	USBSPD		0x00C0
 #define	RTPORT		0x0001
 
+/* SUDMAC registers */
+#define CH0CFG		0x00
+#define CH1CFG		0x04
+#define CH0BA		0x10
+#define CH1BA		0x14
+#define CH0BBC		0x18
+#define CH1BBC		0x1C
+#define CH0CA		0x20
+#define CH1CA		0x24
+#define CH0CBC		0x28
+#define CH1CBC		0x2C
+#define CH0DEN		0x30
+#define CH1DEN		0x34
+#define DSTSCLR		0x38
+#define DBUFCTRL	0x3C
+#define DINTCTRL	0x40
+#define DINTSTS		0x44
+#define DINTSTSCLR	0x48
+#define CH0SHCTRL	0x50
+#define CH1SHCTRL	0x54
+
+/* SUDMAC Configuration Registers */
+#define SENDBUFM	0x1000 /* b12: Transmit Buffer Mode */
+#define RCVENDM		0x0100 /* b8: Receive Data Transfer End Mode */
+#define LBA_WAIT	0x0030 /* b5-4: Local Bus Access Wait */
+
+/* DMA Enable Registers */
+#define DEN		0x0001 /* b1: DMA Transfer Enable */
+
+/* DMA Status Clear Register */
+#define CH1STCLR	0x0002 /* b2: Ch1 DMA Status Clear */
+#define CH0STCLR	0x0001 /* b1: Ch0 DMA Status Clear */
+
+/* DMA Buffer Control Register */
+#define CH1BUFW		0x0200 /* b9: Ch1 DMA Buffer Data Transfer Enable */
+#define CH0BUFW		0x0100 /* b8: Ch0 DMA Buffer Data Transfer Enable */
+#define CH1BUFS		0x0002 /* b2: Ch1 DMA Buffer Data Status */
+#define CH0BUFS		0x0001 /* b1: Ch0 DMA Buffer Data Status */
+
+/* DMA Interrupt Control Register */
+#define CH1ERRE		0x0200 /* b9: Ch1 SHwy Res Err Detect Int Enable */
+#define CH0ERRE		0x0100 /* b8: Ch0 SHwy Res Err Detect Int Enable */
+#define CH1ENDE		0x0002 /* b2: Ch1 DMA Transfer End Int Enable */
+#define CH0ENDE		0x0001 /* b1: Ch0 DMA Transfer End Int Enable */
+
+/* DMA Interrupt Status Register */
+#define CH1ERRS		0x0200 /* b9: Ch1 SHwy Res Err Detect Int Status */
+#define CH0ERRS		0x0100 /* b8: Ch0 SHwy Res Err Detect Int Status */
+#define CH1ENDS		0x0002 /* b2: Ch1 DMA Transfer End Int Status */
+#define CH0ENDS		0x0001 /* b1: Ch0 DMA Transfer End Int Status */
+
+/* DMA Interrupt Status Clear Register */
+#define CH1ERRC		0x0200 /* b9: Ch1 SHwy Res Err Detect Int Stat Clear */
+#define CH0ERRC		0x0100 /* b8: Ch0 SHwy Res Err Detect Int Stat Clear */
+#define CH1ENDC		0x0002 /* b2: Ch1 DMA Transfer End Int Stat Clear */
+#define CH0ENDC		0x0001 /* b1: Ch0 DMA Transfer End Int Stat Clear */
+
 #endif /* __LINUX_USB_R8A66597_H */
 
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 8977431259c6..e5a40c318548 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -82,6 +82,13 @@ struct renesas_usbhs_platform_callback {
 	 * get VBUS status function.
 	 */
 	int (*get_vbus)(struct platform_device *pdev);
+
+	/*
+	 * option:
+	 *
+	 * VBUS control is needed for Host
+	 */
+	int (*set_vbus)(struct platform_device *pdev, int enable);
 };
 
 /*
@@ -101,6 +108,8 @@ struct renesas_usbhs_driver_param {
 	 * option:
 	 *
 	 * for BUSWAIT :: BWAIT
+	 * see
+	 *	renesas_usbhs/common.c :: usbhsc_set_buswait()
 	 * */
 	int buswait_bwait;
 
@@ -127,6 +136,11 @@ struct renesas_usbhs_driver_param {
 	 * pio <--> dma border.
 	 */
 	int pio_dma_border; /* default is 64byte */
+
+	/*
+	 * option:
+	 */
+	u32 has_otg:1; /* for controlling PWEN/EXTLP */
 };
 
 /*