mm: per-thread vma caching

This patch is a continuation of efforts trying to optimize find_vma(),
avoiding potentially expensive rbtree walks to locate a vma upon faults.
The original approach (https://lkml.org/lkml/2013/11/1/410), where the
largest vma was also cached, ended up being too specific and random,
thus further comparison with other approaches were needed.  There are
two things to consider when dealing with this, the cache hit rate and
the latency of find_vma().  Improving the hit-rate does not necessarily
translate in finding the vma any faster, as the overhead of any fancy
caching schemes can be too high to consider.

We currently cache the last used vma for the whole address space, which
provides a nice optimization, reducing the total cycles in find_vma() by
up to 250%, for workloads with good locality.  On the other hand, this
simple scheme is pretty much useless for workloads with poor locality.
Analyzing ebizzy runs shows that, no matter how many threads are
running, the mmap_cache hit rate is less than 2%, and in many situations
below 1%.

The proposed approach is to replace this scheme with a small per-thread
cache, maximizing hit rates at a very low maintenance cost.
Invalidations are performed by simply bumping up a 32-bit sequence
number.  The only expensive operation is in the rare case of a seq
number overflow, where all caches that share the same address space are
flushed.  Upon a miss, the proposed replacement policy is based on the
page number that contains the virtual address in question.  Concretely,
the following results are seen on an 80 core, 8 socket x86-64 box:

1) System bootup: Most programs are single threaded, so the per-thread
   scheme does improve ~50% hit rate by just adding a few more slots to
   the cache.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 50.61%   | 19.90            |
| patched        | 73.45%   | 13.58            |
+----------------+----------+------------------+

2) Kernel build: This one is already pretty good with the current
   approach as we're dealing with good locality.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 75.28%   | 11.03            |
| patched        | 88.09%   | 9.31             |
+----------------+----------+------------------+

3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 70.66%   | 17.14            |
| patched        | 91.15%   | 12.57            |
+----------------+----------+------------------+

4) Ebizzy: There's a fair amount of variation from run to run, but this
   approach always shows nearly perfect hit rates, while baseline is just
   about non-existent.  The amounts of cycles can fluctuate between
   anywhere from ~60 to ~116 for the baseline scheme, but this approach
   reduces it considerably.  For instance, with 80 threads:

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 1.06%    | 91.54            |
| patched        | 99.97%   | 14.18            |
+----------------+----------+------------------+

[akpm@linux-foundation.org: fix nommu build, per Davidlohr]
[akpm@linux-foundation.org: document vmacache_valid() logic]
[akpm@linux-foundation.org: attempt to untangle header files]
[akpm@linux-foundation.org: add vmacache_find() BUG_ON]
[hughd@google.com: add vmacache_valid_mm() (from Oleg)]
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: adjust and enhance comments]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2 files changed, 6 insertions, 2 deletions

diff --git a/fs/exec.c b/fs/exec.c
index 25dfeba6d55f..b60ccf969a8b 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -26,6 +26,7 @@
 #include <linux/file.h>
 #include <linux/fdtable.h>
 #include <linux/mm.h>
+#include <linux/vmacache.h>
 #include <linux/stat.h>
 #include <linux/fcntl.h>
 #include <linux/swap.h>
@@ -822,7 +823,7 @@ EXPORT_SYMBOL(read_code);
 static int exec_mmap(struct mm_struct *mm)
 {
 	struct task_struct *tsk;
-	struct mm_struct * old_mm, *active_mm;
+	struct mm_struct *old_mm, *active_mm;
 
 	/* Notify parent that we're no longer interested in the old VM */
 	tsk = current;
@@ -848,6 +849,8 @@ static int exec_mmap(struct mm_struct *mm)
 	tsk->mm = mm;
 	tsk->active_mm = mm;
 	activate_mm(active_mm, mm);
+	tsk->mm->vmacache_seqnum = 0;
+	vmacache_flush(tsk);
 	task_unlock(tsk);
 	if (old_mm) {
 		up_read(&old_mm->mmap_sem);
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index fb52b548080d..442177b1119a 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -1,4 +1,5 @@
 #include <linux/mm.h>
+#include <linux/vmacache.h>
 #include <linux/hugetlb.h>
 #include <linux/huge_mm.h>
 #include <linux/mount.h>
@@ -152,7 +153,7 @@ static void *m_start(struct seq_file *m, loff_t *pos)
 
 	/*
 	 * We remember last_addr rather than next_addr to hit with
-	 * mmap_cache most of the time. We have zero last_addr at
+	 * vmacache most of the time. We have zero last_addr at
 	 * the beginning and also after lseek. We will have -1 last_addr
 	 * after the end of the vmas.
 	 */