spi/bfin_spi: redo GPIO CS handling

The common SPI layers take care of detecting CS conflicts and preventing
two devices from claiming the same CS.  This causes problems for the GPIO
CS support we currently have as we are using CS0 to mean "GPIO CS".  But
if we have multiple devices using a GPIO CS, the common SPI layers see
multiple devices using the virtual "CS0" and reject any such attempts.

To make both work, we introduce an offset define.  This represents the
max number of hardware CS values that the SPI peripheral supports.  If
the CS is below this limit, we know we can use the hardware CS.  If it's
above, we treat it as a GPIO CS.  This keeps the CS unique as seen by
the common code and prevents conflicts.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 21 insertions, 19 deletions

diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index 07044d7db9a4..278fe0a612c2 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -183,7 +183,7 @@ static int bfin_spi_flush(struct master_data *drv_data)
 /* Chip select operation functions for cs_change flag */
 static void bfin_spi_cs_active(struct master_data *drv_data, struct slave_data *chip)
 {
-	if (likely(chip->chip_select_num)) {
+	if (likely(chip->chip_select_num < MAX_CTRL_CS)) {
 		u16 flag = read_FLAG(drv_data);
 
 		flag &= ~chip->flag;
@@ -196,7 +196,7 @@ static void bfin_spi_cs_active(struct master_data *drv_data, struct slave_data *
 
 static void bfin_spi_cs_deactive(struct master_data *drv_data, struct slave_data *chip)
 {
-	if (likely(chip->chip_select_num)) {
+	if (likely(chip->chip_select_num < MAX_CTRL_CS)) {
 		u16 flag = read_FLAG(drv_data);
 
 		flag |= chip->flag;
@@ -214,20 +214,24 @@ static void bfin_spi_cs_deactive(struct master_data *drv_data, struct slave_data
 /* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */
 static inline void bfin_spi_cs_enable(struct master_data *drv_data, struct slave_data *chip)
 {
-	u16 flag = read_FLAG(drv_data);
+	if (chip->chip_select_num < MAX_CTRL_CS) {
+		u16 flag = read_FLAG(drv_data);
 
-	flag |= (chip->flag >> 8);
+		flag |= (chip->flag >> 8);
 
-	write_FLAG(drv_data, flag);
+		write_FLAG(drv_data, flag);
+	}
 }
 
 static inline void bfin_spi_cs_disable(struct master_data *drv_data, struct slave_data *chip)
 {
-	u16 flag = read_FLAG(drv_data);
+	if (chip->chip_select_num < MAX_CTRL_CS) {
+		u16 flag = read_FLAG(drv_data);
 
-	flag &= ~(chip->flag >> 8);
+		flag &= ~(chip->flag >> 8);
 
-	write_FLAG(drv_data, flag);
+		write_FLAG(drv_data, flag);
+	}
 }
 
 /* stop controller and re-config current chip*/
@@ -1016,7 +1020,6 @@ static int bfin_spi_setup(struct spi_device *spi)
 		chip->ctl_reg = chip_info->ctl_reg;
 		chip->bits_per_word = chip_info->bits_per_word;
 		chip->cs_chg_udelay = chip_info->cs_chg_udelay;
-		chip->cs_gpio = chip_info->cs_gpio;
 		chip->idle_tx_val = chip_info->idle_tx_val;
 		chip->pio_interrupt = chip_info->pio_interrupt;
 	}
@@ -1036,8 +1039,11 @@ static int bfin_spi_setup(struct spi_device *spi)
 	 * SPI_BAUD, not the real baudrate
 	 */
 	chip->baud = hz_to_spi_baud(spi->max_speed_hz);
-	chip->flag = (1 << (spi->chip_select)) << 8;
 	chip->chip_select_num = spi->chip_select;
+	if (chip->chip_select_num < MAX_CTRL_CS)
+		chip->flag = (1 << spi->chip_select) << 8;
+	else
+		chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS;
 
 	switch (chip->bits_per_word) {
 	case 8:
@@ -1098,7 +1104,7 @@ static int bfin_spi_setup(struct spi_device *spi)
 		disable_irq(drv_data->spi_irq);
 	}
 
-	if (chip->chip_select_num == 0) {
+	if (chip->chip_select_num >= MAX_CTRL_CS) {
 		ret = gpio_request(chip->cs_gpio, spi->modalias);
 		if (ret) {
 			dev_err(&spi->dev, "gpio_request() error\n");
@@ -1115,8 +1121,7 @@ static int bfin_spi_setup(struct spi_device *spi)
 	spi_set_ctldata(spi, chip);
 
 	dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num);
-	if (chip->chip_select_num > 0 &&
-	    chip->chip_select_num <= spi->master->num_chipselect) {
+	if (chip->chip_select_num < MAX_CTRL_CS) {
 		ret = peripheral_request(ssel[spi->master->bus_num]
 		                         [chip->chip_select_num-1], spi->modalias);
 		if (ret) {
@@ -1131,7 +1136,7 @@ static int bfin_spi_setup(struct spi_device *spi)
 	return 0;
 
  pin_error:
-	if (chip->chip_select_num == 0)
+	if (chip->chip_select_num >= MAX_CTRL_CS)
 		gpio_free(chip->cs_gpio);
 	else
 		peripheral_free(ssel[spi->master->bus_num]
@@ -1162,14 +1167,11 @@ static void bfin_spi_cleanup(struct spi_device *spi)
 	if (!chip)
 		return;
 
-	if ((chip->chip_select_num > 0)
-		&& (chip->chip_select_num <= spi->master->num_chipselect)) {
+	if (chip->chip_select_num < MAX_CTRL_CS) {
 		peripheral_free(ssel[spi->master->bus_num]
 					[chip->chip_select_num-1]);
 		bfin_spi_cs_disable(drv_data, chip);
-	}
-
-	if (chip->chip_select_num == 0)
+	} else
 		gpio_free(chip->cs_gpio);
 
 	kfree(chip);