summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorRajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>2016-05-26 12:11:19 +0300
committerDarren Hart <dvhart@linux.intel.com>2016-05-27 21:47:56 +0300
commitb740d2e9233cb33626d3b62210bcfc6a34baa839 (patch)
treebb0ed870f77fef2bffaded52040e174578bd6caa /drivers
parentff8651237f39cea60dc89b2d9f25d9ede3fc82c0 (diff)
downloadlinux-b740d2e9233cb33626d3b62210bcfc6a34baa839.tar.xz
platform/x86: Add PMC Driver for Intel Core SoC
This patch adds the Power Management Controller driver as a PCI driver for Intel Core SoC architecture. This driver can utilize debugging capabilities and supported features as exposed by the Power Management Controller. Please refer to the below specification for more details on PMC features. http://www.intel.in/content/www/in/en/chipsets/100-series-chipset-datasheet-vol-2.html The current version of this driver exposes SLP_S0_RESIDENCY counter. This counter can be used for detecting fragile SLP_S0 signal related failures and take corrective actions when PCH SLP_S0 signal is not asserted after kernel freeze as part of suspend to idle flow (echo freeze > /sys/power/state). Intel Platform Controller Hub (PCH) asserts SLP_S0 signal when it detects favorable conditions to enter its low power mode. As a pre-requisite the SoC should be in deepest possible Package C-State and devices should be in low power mode. For example, on Skylake SoC the deepest Package C-State is Package C10 or PC10. Suspend to idle flow generally leads to PC10 state but PC10 state may not be sufficient for realizing the platform wide power potential which SLP_S0 signal assertion can provide. SLP_S0 signal is often connected to the Embedded Controller (EC) and the Power Management IC (PMIC) for other platform power management related optimizations. In general, SLP_S0 assertion == PC10 + PCH low power mode + ModPhy Lanes power gated + PLL Idle. As part of this driver, a mechanism to read the SLP_S0_RESIDENCY is exposed as an API and also debugfs features are added to indicate SLP_S0 signal assertion residency in microseconds. echo freeze > /sys/power/state wake the system cat /sys/kernel/debug/pmc_core/slp_s0_residency_usec Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: Vishwanath Somayaji <vishwanath.somayaji@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/platform/x86/Kconfig12
-rw-r--r--drivers/platform/x86/Makefile1
-rw-r--r--drivers/platform/x86/intel_pmc_core.c200
-rw-r--r--drivers/platform/x86/intel_pmc_core.h51
4 files changed, 264 insertions, 0 deletions
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index ed2004be13cf..c06bb85c2839 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -846,6 +846,18 @@ config INTEL_IMR
If you are running on a Galileo/Quark say Y here.
+config INTEL_PMC_CORE
+ bool "Intel PMC Core driver"
+ depends on X86 && PCI
+ ---help---
+ The Intel Platform Controller Hub for Intel Core SoCs provides access
+ to Power Management Controller registers via a PCI interface. This
+ driver can utilize debugging capabilities and supported features as
+ exposed by the Power Management Controller.
+
+ Supported features:
+ - SLP_S0_RESIDENCY counter.
+
config IBM_RTL
tristate "Device driver to enable PRTL support"
depends on X86 && PCI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 448443c3baba..9b11b4073e03 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -69,3 +69,4 @@ obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o
obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_core.o \
intel_telemetry_pltdrv.o \
intel_telemetry_debugfs.o
+obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o
diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
new file mode 100644
index 000000000000..2776bec89c88
--- /dev/null
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -0,0 +1,200 @@
+/*
+ * Intel Core SoC Power Management Controller Driver
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Authors: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
+ * Vishwanath Somayaji <vishwanath.somayaji@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/seq_file.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/pmc_core.h>
+
+#include "intel_pmc_core.h"
+
+static struct pmc_dev pmc;
+
+static const struct pci_device_id pmc_pci_ids[] = {
+ { PCI_VDEVICE(INTEL, SPT_PMC_PCI_DEVICE_ID), (kernel_ulong_t)NULL },
+ { 0, },
+};
+
+static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
+{
+ return readl(pmcdev->regbase + reg_offset);
+}
+
+static inline u32 pmc_core_adjust_slp_s0_step(u32 value)
+{
+ return value * SPT_PMC_SLP_S0_RES_COUNTER_STEP;
+}
+
+/**
+ * intel_pmc_slp_s0_counter_read() - Read SLP_S0 residency.
+ * @data: Out param that contains current SLP_S0 count.
+ *
+ * This API currently supports Intel Skylake SoC and Sunrise
+ * Point Platform Controller Hub. Future platform support
+ * should be added for platforms that support low power modes
+ * beyond Package C10 state.
+ *
+ * SLP_S0_RESIDENCY counter counts in 100 us granularity per
+ * step hence function populates the multiplied value in out
+ * parameter @data.
+ *
+ * Return: an error code or 0 on success.
+ */
+int intel_pmc_slp_s0_counter_read(u32 *data)
+{
+ struct pmc_dev *pmcdev = &pmc;
+ u32 value;
+
+ if (!pmcdev->has_slp_s0_res)
+ return -EACCES;
+
+ value = pmc_core_reg_read(pmcdev, SPT_PMC_SLP_S0_RES_COUNTER_OFFSET);
+ *data = pmc_core_adjust_slp_s0_step(value);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(intel_pmc_slp_s0_counter_read);
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+static int pmc_core_dev_state_show(struct seq_file *s, void *unused)
+{
+ struct pmc_dev *pmcdev = s->private;
+ u32 counter_val;
+
+ counter_val = pmc_core_reg_read(pmcdev,
+ SPT_PMC_SLP_S0_RES_COUNTER_OFFSET);
+ seq_printf(s, "%u\n", pmc_core_adjust_slp_s0_step(counter_val));
+
+ return 0;
+}
+
+static int pmc_core_dev_state_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pmc_core_dev_state_show, inode->i_private);
+}
+
+static const struct file_operations pmc_core_dev_state_ops = {
+ .open = pmc_core_dev_state_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void pmc_core_dbgfs_unregister(struct pmc_dev *pmcdev)
+{
+ debugfs_remove_recursive(pmcdev->dbgfs_dir);
+}
+
+static int pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
+{
+ struct dentry *dir, *file;
+
+ dir = debugfs_create_dir("pmc_core", NULL);
+ if (!dir)
+ return -ENOMEM;
+
+ pmcdev->dbgfs_dir = dir;
+ file = debugfs_create_file("slp_s0_residency_usec", S_IFREG | S_IRUGO,
+ dir, pmcdev, &pmc_core_dev_state_ops);
+
+ if (!file) {
+ pmc_core_dbgfs_unregister(pmcdev);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+#else
+static inline int pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
+{
+ return 0;
+}
+
+static inline void pmc_core_dbgfs_unregister(struct pmc_dev *pmcdev)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static const struct x86_cpu_id intel_pmc_core_ids[] = {
+ { X86_VENDOR_INTEL, 6, 0x4e, X86_FEATURE_MWAIT,
+ (kernel_ulong_t)NULL}, /* Skylake CPUID Signature */
+ { X86_VENDOR_INTEL, 6, 0x5e, X86_FEATURE_MWAIT,
+ (kernel_ulong_t)NULL}, /* Skylake CPUID Signature */
+ {}
+};
+
+static int pmc_core_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ struct device *ptr_dev = &dev->dev;
+ struct pmc_dev *pmcdev = &pmc;
+ const struct x86_cpu_id *cpu_id;
+ int err;
+
+ cpu_id = x86_match_cpu(intel_pmc_core_ids);
+ if (!cpu_id) {
+ dev_dbg(&dev->dev, "PMC Core: cpuid mismatch.\n");
+ return -EINVAL;
+ }
+
+ err = pcim_enable_device(dev);
+ if (err < 0) {
+ dev_dbg(&dev->dev, "PMC Core: failed to enable Power Management Controller.\n");
+ return err;
+ }
+
+ err = pci_read_config_dword(dev,
+ SPT_PMC_BASE_ADDR_OFFSET,
+ &pmcdev->base_addr);
+ if (err < 0) {
+ dev_dbg(&dev->dev, "PMC Core: failed to read PCI config space.\n");
+ return err;
+ }
+ dev_dbg(&dev->dev, "PMC Core: PWRMBASE is %#x\n", pmcdev->base_addr);
+
+ pmcdev->regbase = devm_ioremap_nocache(ptr_dev,
+ pmcdev->base_addr,
+ SPT_PMC_MMIO_REG_LEN);
+ if (!pmcdev->regbase) {
+ dev_dbg(&dev->dev, "PMC Core: ioremap failed.\n");
+ return -ENOMEM;
+ }
+
+ err = pmc_core_dbgfs_register(pmcdev);
+ if (err < 0) {
+ dev_err(&dev->dev, "PMC Core: debugfs register failed.\n");
+ return err;
+ }
+
+ pmc.has_slp_s0_res = true;
+ return 0;
+}
+
+static struct pci_driver intel_pmc_core_driver = {
+ .name = "intel_pmc_core",
+ .id_table = pmc_pci_ids,
+ .probe = pmc_core_probe,
+};
+
+builtin_pci_driver(intel_pmc_core_driver);
diff --git a/drivers/platform/x86/intel_pmc_core.h b/drivers/platform/x86/intel_pmc_core.h
new file mode 100644
index 000000000000..a9dadaf787c1
--- /dev/null
+++ b/drivers/platform/x86/intel_pmc_core.h
@@ -0,0 +1,51 @@
+/*
+ * Intel Core SoC Power Management Controller Header File
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Authors: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
+ * Vishwanath Somayaji <vishwanath.somayaji@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef PMC_CORE_H
+#define PMC_CORE_H
+
+/* Sunrise Point Power Management Controller PCI Device ID */
+#define SPT_PMC_PCI_DEVICE_ID 0x9d21
+#define SPT_PMC_BASE_ADDR_OFFSET 0x48
+#define SPT_PMC_SLP_S0_RES_COUNTER_OFFSET 0x13c
+#define SPT_PMC_MMIO_REG_LEN 0x100
+#define SPT_PMC_SLP_S0_RES_COUNTER_STEP 0x64
+
+/**
+ * struct pmc_dev - pmc device structure
+ * @base_addr: comtains pmc base address
+ * @regbase: pointer to io-remapped memory location
+ * @dbgfs_dir: path to debug fs interface
+ * @feature_available: flag to indicate whether
+ * the feature is available
+ * on a particular platform or not.
+ *
+ * pmc_dev contains info about power management controller device.
+ */
+struct pmc_dev {
+ u32 base_addr;
+ void __iomem *regbase;
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+ struct dentry *dbgfs_dir;
+#endif /* CONFIG_DEBUG_FS */
+ bool has_slp_s0_res;
+};
+
+#endif /* PMC_CORE_H */