Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 32-bit SoC platform updates from Olof Johansson:
 "Most of the SoC updates in this cycle are cleanups and moves to more
  modern infrastructure:

   - Davinci was moved to common clock framework

   - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the
     keyboard interface (bitbanged AT keyboard via GPIO).

   - Removal of some stale code for Renesas platforms

   - Power management improvements for i.MX6LL"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits)
  ARM: uniphier: select RESET_CONTROLLER
  arm64: uniphier: select RESET_CONTROLLER
  ARM: uniphier: remove empty Makefile
  ARM: exynos: Clear global variable on init error path
  ARM: exynos: Remove outdated maintainer information
  ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill
  soc: r9a06g032: don't build SMP files for non-SMP config
  ARM: shmobile: Add the R9A06G032 SMP enabler driver
  ARM: at91: pm: configure wakeup sources for ULP1 mode
  ARM: at91: pm: add PMC fast startup registers defines
  ARM: at91: pm: Add ULP1 mode support
  ARM: at91: pm: Use ULP0 naming instead of slow clock
  ARM: hisi: handle of_iomap and fix missing of_node_put
  ARM: hisi: check of_iomap and fix missing of_node_put
  ARM: hisi: fix error handling and missing of_node_put
  ARM: mx5: Set the DBGEN bit in ARM_GPC register
  ARM: imx51: Configure M4IF to avoid visual artifacts
  ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll
  ARM: imx: fix i.MX6SLL build
  ...

13 files changed, 268 insertions, 147 deletions

diff --git a/drivers/clk/davinci/psc-da830.c b/drivers/clk/davinci/psc-da830.c
index 081b039fcb02..6481337382a6 100644
--- a/drivers/clk/davinci/psc-da830.c
+++ b/drivers/clk/davinci/psc-da830.c
@@ -14,6 +14,7 @@
 
 #include "psc.h"
 
+LPSC_CLKDEV1(aemif_clkdev,	NULL,	"ti-aemif");
 LPSC_CLKDEV1(spi0_clkdev,	NULL,	"spi_davinci.0");
 LPSC_CLKDEV1(mmcsd_clkdev,	NULL,	"da830-mmc.0");
 LPSC_CLKDEV1(uart0_clkdev,	NULL,	"serial8250.0");
@@ -22,7 +23,7 @@ static const struct davinci_lpsc_clk_info da830_psc0_info[] = {
 	LPSC(0,  0, tpcc,     pll0_sysclk2, NULL,         LPSC_ALWAYS_ENABLED),
 	LPSC(1,  0, tptc0,    pll0_sysclk2, NULL,         LPSC_ALWAYS_ENABLED),
 	LPSC(2,  0, tptc1,    pll0_sysclk2, NULL,         LPSC_ALWAYS_ENABLED),
-	LPSC(3,  0, aemif,    pll0_sysclk3, NULL,         LPSC_ALWAYS_ENABLED),
+	LPSC(3,  0, aemif,    pll0_sysclk3, aemif_clkdev, LPSC_ALWAYS_ENABLED),
 	LPSC(4,  0, spi0,     pll0_sysclk2, spi0_clkdev,  0),
 	LPSC(5,  0, mmcsd,    pll0_sysclk2, mmcsd_clkdev, 0),
 	LPSC(6,  0, aintc,    pll0_sysclk4, NULL,         LPSC_ALWAYS_ENABLED),
diff --git a/drivers/clk/davinci/psc-da850.c b/drivers/clk/davinci/psc-da850.c
index d196dcbed560..5a18bca464cd 100644
--- a/drivers/clk/davinci/psc-da850.c
+++ b/drivers/clk/davinci/psc-da850.c
@@ -16,8 +16,7 @@
 
 #include "psc.h"
 
-LPSC_CLKDEV2(emifa_clkdev,	NULL,		"ti-aemif",
-				"aemif",	"davinci_nand.0");
+LPSC_CLKDEV1(emifa_clkdev,	NULL,		"ti-aemif");
 LPSC_CLKDEV1(spi0_clkdev,	NULL,		"spi_davinci.0");
 LPSC_CLKDEV1(mmcsd0_clkdev,	NULL,		"da830-mmc.0");
 LPSC_CLKDEV1(uart0_clkdev,	NULL,		"serial8250.0");
diff --git a/drivers/clk/davinci/psc-dm365.c b/drivers/clk/davinci/psc-dm365.c
index 8c73086cc676..c75424f4ea3b 100644
--- a/drivers/clk/davinci/psc-dm365.c
+++ b/drivers/clk/davinci/psc-dm365.c
@@ -21,7 +21,8 @@ LPSC_CLKDEV1(mmcsd1_clkdev,		NULL,		"da830-mmc.1");
 LPSC_CLKDEV1(asp0_clkdev,		NULL,		"davinci-mcbsp");
 LPSC_CLKDEV1(usb_clkdev,		"usb",		NULL);
 LPSC_CLKDEV1(spi2_clkdev,		NULL,		"spi_davinci.2");
-LPSC_CLKDEV1(aemif_clkdev,		"aemif",	NULL);
+LPSC_CLKDEV2(aemif_clkdev,		"aemif",	NULL,
+					NULL,		"ti-aemif");
 LPSC_CLKDEV1(mmcsd0_clkdev,		NULL,		"da830-mmc.0");
 LPSC_CLKDEV1(i2c_clkdev,		NULL,		"i2c_davinci.1");
 LPSC_CLKDEV1(uart0_clkdev,		NULL,		"serial8250.0");
diff --git a/drivers/clk/davinci/psc-dm644x.c b/drivers/clk/davinci/psc-dm644x.c
index fc0230e3a3d6..0cea6e0bd5f0 100644
--- a/drivers/clk/davinci/psc-dm644x.c
+++ b/drivers/clk/davinci/psc-dm644x.c
@@ -21,7 +21,8 @@ LPSC_CLKDEV2(emac_clkdev,		NULL,		"davinci_emac.1",
 					"fck",		"davinci_mdio.0");
 LPSC_CLKDEV1(usb_clkdev,		"usb",		NULL);
 LPSC_CLKDEV1(ide_clkdev,		NULL,		"palm_bk3710");
-LPSC_CLKDEV1(aemif_clkdev,		"aemif",	NULL);
+LPSC_CLKDEV2(aemif_clkdev,		"aemif",	NULL,
+					NULL,		"ti-aemif");
 LPSC_CLKDEV1(mmcsd_clkdev,		NULL,		"dm6441-mmc.0");
 LPSC_CLKDEV1(asp0_clkdev,		NULL,		"davinci-mcbsp");
 LPSC_CLKDEV1(i2c_clkdev,		NULL,		"i2c_davinci.1");
diff --git a/drivers/clk/davinci/psc-dm646x.c b/drivers/clk/davinci/psc-dm646x.c
index c3f82ed70a80..20012dc7471a 100644
--- a/drivers/clk/davinci/psc-dm646x.c
+++ b/drivers/clk/davinci/psc-dm646x.c
@@ -18,7 +18,8 @@
 LPSC_CLKDEV1(ide_clkdev,	NULL,		"palm_bk3710");
 LPSC_CLKDEV2(emac_clkdev,	NULL,		"davinci_emac.1",
 				"fck",		"davinci_mdio.0");
-LPSC_CLKDEV1(aemif_clkdev,	"aemif",	NULL);
+LPSC_CLKDEV2(aemif_clkdev,	"aemif",	NULL,
+				NULL,		"ti-aemif");
 LPSC_CLKDEV1(mcasp0_clkdev,	NULL,		"davinci-mcasp.0");
 LPSC_CLKDEV1(mcasp1_clkdev,	NULL,		"davinci-mcasp.1");
 LPSC_CLKDEV1(uart0_clkdev,	NULL,		"serial8250.0");
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index 3df501c3421b..f8663d7891f2 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -20,32 +20,33 @@
  * However, when used with the E3 mailboard that producecs non-standard
  * scancodes, a custom key table must be prepared and loaded from userspace.
  */
-#include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/platform_data/ams-delta-fiq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/serio.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 
-#include <asm/mach-types.h>
-#include <mach/board-ams-delta.h>
-
-#include <mach/ams-delta-fiq.h>
+#define DRIVER_NAME	"ams-delta-serio"
 
 MODULE_AUTHOR("Matt Callow");
 MODULE_DESCRIPTION("AMS Delta (E3) keyboard port driver");
 MODULE_LICENSE("GPL");
 
-static struct serio *ams_delta_serio;
+struct ams_delta_serio {
+	struct serio *serio;
+	struct regulator *vcc;
+	unsigned int *fiq_buffer;
+};
 
-static int check_data(int data)
+static int check_data(struct serio *serio, int data)
 {
 	int i, parity = 0;
 
 	/* check valid stop bit */
 	if (!(data & 0x400)) {
-		dev_warn(&ams_delta_serio->dev,
-				"invalid stop bit, data=0x%X\n",
-				data);
+		dev_warn(&serio->dev, "invalid stop bit, data=0x%X\n", data);
 		return SERIO_FRAME;
 	}
 	/* calculate the parity */
@@ -55,9 +56,9 @@ static int check_data(int data)
 	}
 	/* it should be odd */
 	if (!(parity & 0x01)) {
-		dev_warn(&ams_delta_serio->dev,
-				"parity check failed, data=0x%X parity=0x%X\n",
-				data, parity);
+		dev_warn(&serio->dev,
+			 "parity check failed, data=0x%X parity=0x%X\n", data,
+			 parity);
 		return SERIO_PARITY;
 	}
 	return 0;
@@ -65,127 +66,130 @@ static int check_data(int data)
 
 static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id)
 {
-	int *circ_buff = &fiq_buffer[FIQ_CIRC_BUFF];
+	struct ams_delta_serio *priv = dev_id;
+	int *circ_buff = &priv->fiq_buffer[FIQ_CIRC_BUFF];
 	int data, dfl;
 	u8 scancode;
 
-	fiq_buffer[FIQ_IRQ_PEND] = 0;
+	priv->fiq_buffer[FIQ_IRQ_PEND] = 0;
 
 	/*
 	 * Read data from the circular buffer, check it
 	 * and then pass it on the serio
 	 */
-	while (fiq_buffer[FIQ_KEYS_CNT] > 0) {
+	while (priv->fiq_buffer[FIQ_KEYS_CNT] > 0) {
 
-		data = circ_buff[fiq_buffer[FIQ_HEAD_OFFSET]++];
-		fiq_buffer[FIQ_KEYS_CNT]--;
-		if (fiq_buffer[FIQ_HEAD_OFFSET] == fiq_buffer[FIQ_BUF_LEN])
-			fiq_buffer[FIQ_HEAD_OFFSET] = 0;
+		data = circ_buff[priv->fiq_buffer[FIQ_HEAD_OFFSET]++];
+		priv->fiq_buffer[FIQ_KEYS_CNT]--;
+		if (priv->fiq_buffer[FIQ_HEAD_OFFSET] ==
+		    priv->fiq_buffer[FIQ_BUF_LEN])
+			priv->fiq_buffer[FIQ_HEAD_OFFSET] = 0;
 
-		dfl = check_data(data);
+		dfl = check_data(priv->serio, data);
 		scancode = (u8) (data >> 1) & 0xFF;
-		serio_interrupt(ams_delta_serio, scancode, dfl);
+		serio_interrupt(priv->serio, scancode, dfl);
 	}
 	return IRQ_HANDLED;
 }
 
 static int ams_delta_serio_open(struct serio *serio)
 {
-	/* enable keyboard */
-	gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 1);
+	struct ams_delta_serio *priv = serio->port_data;
 
-	return 0;
+	/* enable keyboard */
+	return regulator_enable(priv->vcc);
 }
 
 static void ams_delta_serio_close(struct serio *serio)
 {
+	struct ams_delta_serio *priv = serio->port_data;
+
 	/* disable keyboard */
-	gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0);
+	regulator_disable(priv->vcc);
 }
 
-static const struct gpio ams_delta_gpios[] __initconst_or_module = {
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_DATA,
-		.flags	= GPIOF_DIR_IN,
-		.label	= "serio-data",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_CLK,
-		.flags	= GPIOF_DIR_IN,
-		.label	= "serio-clock",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_PWR,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "serio-power",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "serio-dataout",
-	},
-};
-
-static int __init ams_delta_serio_init(void)
+static int ams_delta_serio_init(struct platform_device *pdev)
 {
-	int err;
-
-	if (!machine_is_ams_delta())
-		return -ENODEV;
+	struct ams_delta_serio *priv;
+	struct serio *serio;
+	int irq, err;
 
-	ams_delta_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
-	if (!ams_delta_serio)
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
 		return -ENOMEM;
 
-	ams_delta_serio->id.type = SERIO_8042;
-	ams_delta_serio->open = ams_delta_serio_open;
-	ams_delta_serio->close = ams_delta_serio_close;
-	strlcpy(ams_delta_serio->name, "AMS DELTA keyboard adapter",
-			sizeof(ams_delta_serio->name));
-	strlcpy(ams_delta_serio->phys, "GPIO/serio0",
-			sizeof(ams_delta_serio->phys));
-
-	err = gpio_request_array(ams_delta_gpios,
-				ARRAY_SIZE(ams_delta_gpios));
-	if (err) {
-		pr_err("ams_delta_serio: Couldn't request gpio pins\n");
-		goto serio;
+	priv->fiq_buffer = pdev->dev.platform_data;
+	if (!priv->fiq_buffer)
+		return -EINVAL;
+
+	priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
+	if (IS_ERR(priv->vcc)) {
+		err = PTR_ERR(priv->vcc);
+		dev_err(&pdev->dev, "regulator request failed (%d)\n", err);
+		/*
+		 * When running on a non-dt platform and requested regulator
+		 * is not available, devm_regulator_get() never returns
+		 * -EPROBE_DEFER as it is not able to justify if the regulator
+		 * may still appear later.  On the other hand, the board can
+		 * still set full constriants flag at late_initcall in order
+		 * to instruct devm_regulator_get() to returnn a dummy one
+		 * if sufficient.  Hence, if we get -ENODEV here, let's convert
+		 * it to -EPROBE_DEFER and wait for the board to decide or
+		 * let Deferred Probe infrastructure handle this error.
+		 */
+		if (err == -ENODEV)
+			err = -EPROBE_DEFER;
+		return err;
 	}
 
-	err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
-			ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING,
-			"ams-delta-serio", 0);
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	err = devm_request_irq(&pdev->dev, irq, ams_delta_serio_interrupt,
+			       IRQ_TYPE_EDGE_RISING, DRIVER_NAME, priv);
 	if (err < 0) {
-		pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n",
-				gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
-		goto gpio;
+		dev_err(&pdev->dev, "IRQ request failed (%d)\n", err);
+		return err;
 	}
-	/*
-	 * Since GPIO register handling for keyboard clock pin is performed
-	 * at FIQ level, switch back from edge to simple interrupt handler
-	 * to avoid bad interaction.
-	 */
-	irq_set_handler(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
-			handle_simple_irq);
 
-	serio_register_port(ams_delta_serio);
-	dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name);
+	serio = kzalloc(sizeof(*serio), GFP_KERNEL);
+	if (!serio)
+		return -ENOMEM;
+
+	priv->serio = serio;
+
+	serio->id.type = SERIO_8042;
+	serio->open = ams_delta_serio_open;
+	serio->close = ams_delta_serio_close;
+	strlcpy(serio->name, "AMS DELTA keyboard adapter", sizeof(serio->name));
+	strlcpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
+	serio->dev.parent = &pdev->dev;
+	serio->port_data = priv;
+
+	serio_register_port(serio);
+
+	platform_set_drvdata(pdev, priv);
+
+	dev_info(&serio->dev, "%s\n", serio->name);
 
 	return 0;
-gpio:
-	gpio_free_array(ams_delta_gpios,
-			ARRAY_SIZE(ams_delta_gpios));
-serio:
-	kfree(ams_delta_serio);
-	return err;
 }
-module_init(ams_delta_serio_init);
 
-static void __exit ams_delta_serio_exit(void)
+static int ams_delta_serio_exit(struct platform_device *pdev)
 {
-	serio_unregister_port(ams_delta_serio);
-	free_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
-	gpio_free_array(ams_delta_gpios,
-			ARRAY_SIZE(ams_delta_gpios));
+	struct ams_delta_serio *priv = platform_get_drvdata(pdev);
+
+	serio_unregister_port(priv->serio);
+
+	return 0;
 }
-module_exit(ams_delta_serio_exit);
+
+static struct platform_driver ams_delta_serio_driver = {
+	.probe	= ams_delta_serio_init,
+	.remove	= ams_delta_serio_exit,
+	.driver	= {
+		.name	= DRIVER_NAME
+	},
+};
+module_platform_driver(ams_delta_serio_driver);
diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index 05157442a980..b1b53f6c452f 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -74,7 +74,6 @@ static const char version[] =
 #include <linux/skbuff.h>
 
 #include <linux/dmaengine.h>
-#include <linux/dma/pxa-dma.h>
 
 #include <asm/io.h>
 
@@ -1795,7 +1794,6 @@ static int smc911x_probe(struct net_device *dev)
 #ifdef SMC_USE_DMA
 	struct dma_slave_config	config;
 	dma_cap_mask_t mask;
-	struct pxad_param param;
 #endif
 
 	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
@@ -1971,15 +1969,8 @@ static int smc911x_probe(struct net_device *dev)
 
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
-	param.prio = PXAD_PRIO_LOWEST;
-	param.drcmr = -1UL;
-
-	lp->rxdma =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param, &dev->dev, "rx");
-	lp->txdma =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param, &dev->dev, "tx");
+	lp->rxdma = dma_request_channel(mask, NULL, NULL);
+	lp->txdma = dma_request_channel(mask, NULL, NULL);
 	lp->rxdma_active = 0;
 	lp->txdma_active = 0;
 
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 080428762858..b944828f9ea3 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -2019,17 +2019,10 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 #  endif
 	if (lp->cfg.flags & SMC91X_USE_DMA) {
 		dma_cap_mask_t mask;
-		struct pxad_param param;
 
 		dma_cap_zero(mask);
 		dma_cap_set(DMA_SLAVE, mask);
-		param.prio = PXAD_PRIO_LOWEST;
-		param.drcmr = -1UL;
-
-		lp->dma_chan =
-			dma_request_slave_channel_compat(mask, pxad_filter_fn,
-							 &param, &dev->dev,
-							 "data");
+		lp->dma_chan = dma_request_channel(mask, NULL, NULL);
 	}
 #endif
 
diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index b337ee97e0c0..a27352229fc2 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -301,7 +301,6 @@ struct smc_local {
  * as RX which can overrun memory and lose packets.
  */
 #include <linux/dma-mapping.h>
-#include <linux/dma/pxa-dma.h>
 
 #ifdef SMC_insl
 #undef SMC_insl
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 7dc0f20d7907..c37b0803c1b6 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -18,6 +18,9 @@ obj-$(CONFIG_SYSC_R8A77970)	+= r8a77970-sysc.o
 obj-$(CONFIG_SYSC_R8A77980)	+= r8a77980-sysc.o
 obj-$(CONFIG_SYSC_R8A77990)	+= r8a77990-sysc.o
 obj-$(CONFIG_SYSC_R8A77995)	+= r8a77995-sysc.o
+ifdef CONFIG_SMP
+obj-$(CONFIG_ARCH_R9A06G032)	+= r9a06g032-smp.o
+endif
 
 # Family
 obj-$(CONFIG_RST_RCAR)		+= rcar-rst.o
diff --git a/drivers/soc/renesas/r9a06g032-smp.c b/drivers/soc/renesas/r9a06g032-smp.c
new file mode 100644
index 000000000000..a1926e8d73f2
--- /dev/null
+++ b/drivers/soc/renesas/r9a06g032-smp.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * R9A06G032 Second CA7 enabler.
+ *
+ * Copyright (C) 2018 Renesas Electronics Europe Limited
+ *
+ * Michel Pollet <michel.pollet@bp.renesas.com>, <buserror@gmail.com>
+ * Derived from actions,s500-smp
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+
+/*
+ * The second CPU is parked in ROM at boot time. It requires waking it after
+ * writing an address into the BOOTADDR register of sysctrl.
+ *
+ * So the default value of the "cpu-release-addr" corresponds to BOOTADDR...
+ *
+ * *However* the BOOTADDR register is not available when the kernel
+ * starts in NONSEC mode.
+ *
+ * So for NONSEC mode, the bootloader re-parks the second CPU into a pen
+ * in SRAM, and changes the "cpu-release-addr" of linux's DT to a SRAM address,
+ * which is not restricted.
+ */
+
+static void __iomem *cpu_bootaddr;
+
+static DEFINE_SPINLOCK(cpu_lock);
+
+static int
+r9a06g032_smp_boot_secondary(unsigned int cpu,
+			     struct task_struct *idle)
+{
+	if (!cpu_bootaddr)
+		return -ENODEV;
+
+	spin_lock(&cpu_lock);
+
+	writel(__pa_symbol(secondary_startup), cpu_bootaddr);
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	spin_unlock(&cpu_lock);
+
+	return 0;
+}
+
+static void __init r9a06g032_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *dn;
+	int ret = -EINVAL, dns;
+	u32 bootaddr;
+
+	dn = of_get_cpu_node(1, NULL);
+	if (!dn) {
+		pr_err("CPU#1: missing device tree node\n");
+		return;
+	}
+	/*
+	 * Determine the address from which the CPU is polling.
+	 * The bootloader *does* change this property.
+	 * Note: The property can be either 64 or 32 bits, so handle both cases
+	 */
+	if (of_find_property(dn, "cpu-release-addr", &dns)) {
+		if (dns == sizeof(u64)) {
+			u64 temp;
+
+			ret = of_property_read_u64(dn,
+						   "cpu-release-addr", &temp);
+			bootaddr = temp;
+		} else {
+			ret = of_property_read_u32(dn,
+						   "cpu-release-addr",
+						   &bootaddr);
+		}
+	}
+	of_node_put(dn);
+	if (ret) {
+		pr_err("CPU#1: invalid cpu-release-addr property\n");
+		return;
+	}
+	pr_info("CPU#1: cpu-release-addr %08x\n", bootaddr);
+
+	cpu_bootaddr = ioremap(bootaddr, sizeof(bootaddr));
+}
+
+static const struct smp_operations r9a06g032_smp_ops __initconst = {
+	.smp_prepare_cpus = r9a06g032_smp_prepare_cpus,
+	.smp_boot_secondary = r9a06g032_smp_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(r9a06g032_smp,
+		      "renesas,r9a06g032-smp", &r9a06g032_smp_ops);
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 50d03d8b4f9a..029188e8be6e 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -58,6 +58,12 @@
 
 #define RCAR_PD_ALWAYS_ON	32	/* Always-on power area */
 
+struct rcar_sysc_ch {
+	u16 chan_offs;
+	u8 chan_bit;
+	u8 isr_bit;
+};
+
 static void __iomem *rcar_sysc_base;
 static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */
 
@@ -143,12 +149,12 @@ static int rcar_sysc_power(const struct rcar_sysc_ch *sysc_ch, bool on)
 	return ret;
 }
 
-int rcar_sysc_power_down(const struct rcar_sysc_ch *sysc_ch)
+static int rcar_sysc_power_down(const struct rcar_sysc_ch *sysc_ch)
 {
 	return rcar_sysc_power(sysc_ch, false);
 }
 
-int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch)
+static int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch)
 {
 	return rcar_sysc_power(sysc_ch, true);
 }
@@ -315,6 +321,8 @@ struct rcar_pm_domains {
 	struct generic_pm_domain *domains[RCAR_PD_ALWAYS_ON + 1];
 };
 
+static struct genpd_onecell_data *rcar_sysc_onecell_data;
+
 static int __init rcar_sysc_pd_init(void)
 {
 	const struct rcar_sysc_info *info;
@@ -326,9 +334,6 @@ static int __init rcar_sysc_pd_init(void)
 	unsigned int i;
 	int error;
 
-	if (rcar_sysc_base)
-		return 0;
-
 	np = of_find_matching_node_and_match(NULL, rcar_sysc_matches, &match);
 	if (!np)
 		return -ENODEV;
@@ -361,6 +366,7 @@ static int __init rcar_sysc_pd_init(void)
 
 	domains->onecell_data.domains = domains->domains;
 	domains->onecell_data.num_domains = ARRAY_SIZE(domains->domains);
+	rcar_sysc_onecell_data = &domains->onecell_data;
 
 	for (i = 0, syscier = 0; i < info->num_areas; i++)
 		syscier |= BIT(info->areas[i].isr_bit);
@@ -448,27 +454,39 @@ void __init rcar_sysc_nullify(struct rcar_sysc_area *areas,
 		}
 }
 
-void __init rcar_sysc_init(phys_addr_t base, u32 syscier)
+#ifdef CONFIG_ARCH_R8A7779
+static int rcar_sysc_power_cpu(unsigned int idx, bool on)
 {
-	u32 syscimr;
+	struct generic_pm_domain *genpd;
+	struct rcar_sysc_pd *pd;
+	unsigned int i;
 
-	if (!rcar_sysc_pd_init())
-		return;
+	if (!rcar_sysc_onecell_data)
+		return -ENODEV;
 
-	rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
+	for (i = 0; i < rcar_sysc_onecell_data->num_domains; i++) {
+		genpd = rcar_sysc_onecell_data->domains[i];
+		if (!genpd)
+			continue;
 
-	/*
-	 * Mask all interrupt sources to prevent the CPU from receiving them.
-	 * Make sure not to clear reserved bits that were set before.
-	 */
-	syscimr = ioread32(rcar_sysc_base + SYSCIMR);
-	syscimr |= syscier;
-	pr_debug("%s: syscimr = 0x%08x\n", __func__, syscimr);
-	iowrite32(syscimr, rcar_sysc_base + SYSCIMR);
+		pd = to_rcar_pd(genpd);
+		if (!(pd->flags & PD_CPU) || pd->ch.chan_bit != idx)
+			continue;
 
-	/*
-	 * SYSC needs all interrupt sources enabled to control power.
-	 */
-	pr_debug("%s: syscier = 0x%08x\n", __func__, syscier);
-	iowrite32(syscier, rcar_sysc_base + SYSCIER);
+		return on ? rcar_sysc_power_up(&pd->ch)
+			  : rcar_sysc_power_down(&pd->ch);
+	}
+
+	return -ENOENT;
+}
+
+int rcar_sysc_power_down_cpu(unsigned int cpu)
+{
+	return rcar_sysc_power_cpu(cpu, false);
+}
+
+int rcar_sysc_power_up_cpu(unsigned int cpu)
+{
+	return rcar_sysc_power_cpu(cpu, true);
 }
+#endif /* CONFIG_ARCH_R8A7779 */
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
index 652739c7f718..d0dab323651f 100644
--- a/drivers/soc/ti/pm33xx.c
+++ b/drivers/soc/ti/pm33xx.c
@@ -41,6 +41,8 @@ static struct am33xx_pm_sram_addr *pm_sram;
 static struct device *pm33xx_dev;
 static struct wkup_m3_ipc *m3_ipc;
 
+static unsigned long suspend_wfi_flags;
+
 static u32 sram_suspend_address(unsigned long addr)
 {
 	return ((unsigned long)am33xx_do_wfi_sram +
@@ -53,7 +55,7 @@ static int am33xx_pm_suspend(suspend_state_t suspend_state)
 	int i, ret = 0;
 
 	ret = pm_ops->soc_suspend((unsigned long)suspend_state,
-				  am33xx_do_wfi_sram);
+				  am33xx_do_wfi_sram, suspend_wfi_flags);
 
 	if (ret) {
 		dev_err(pm33xx_dev, "PM: Kernel suspend failure\n");
@@ -227,6 +229,7 @@ static int am33xx_push_sram_idle(void)
 	ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data;
 	ro_sram_data.amx3_pm_sram_data_phys =
 		gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data);
+	ro_sram_data.rtc_base_virt = pm_ops->get_rtc_base_addr();
 
 	/* Save physical address to calculate resume offset during pm init */
 	am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool,
@@ -310,6 +313,17 @@ static int am33xx_pm_probe(struct platform_device *pdev)
 	suspend_set_ops(&am33xx_pm_ops);
 #endif /* CONFIG_SUSPEND */
 
+	/*
+	 * For a system suspend we must flush the caches, we want
+	 * the DDR in self-refresh, we want to save the context
+	 * of the EMIF, and we want the wkup_m3 to handle low-power
+	 * transition.
+	 */
+	suspend_wfi_flags |= WFI_FLAG_FLUSH_CACHE;
+	suspend_wfi_flags |= WFI_FLAG_SELF_REFRESH;
+	suspend_wfi_flags |= WFI_FLAG_SAVE_EMIF;
+	suspend_wfi_flags |= WFI_FLAG_WAKE_M3;
+
 	ret = pm_ops->init();
 	if (ret) {
 		dev_err(dev, "Unable to call core pm init!\n");