Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs into for-2.6.34-incoming

Resolve merge conflict in fs/xfs/linux-2.6/xfs_export.c.

28 files changed, 245 insertions, 94 deletions

diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 96f11715cd26..355dffcc23b0 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -494,7 +494,7 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
 		return 0;
 	/* allocate 2^1 pages = 8K (on i386);
 	 * should be more than enough for one device */
-	pages_start = (char *)__get_free_pages(GFP_KERNEL, 1);
+	pages_start = (char *)__get_free_pages(GFP_NOIO, 1);
 	if (!pages_start)
 		return -ENOMEM;
 
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 6e8bcdfd23b4..a678186f218f 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1312,9 +1312,9 @@ static int processcompl(struct async *as, void __user * __user *arg)
 	void __user *addr = as->userurb;
 	unsigned int i;
 
-	if (as->userbuffer)
+	if (as->userbuffer && urb->actual_length)
 		if (copy_to_user(as->userbuffer, urb->transfer_buffer,
-				 urb->transfer_buffer_length))
+				 urb->actual_length))
 			goto err_out;
 	if (put_user(as->status, &userurb->status))
 		goto err_out;
@@ -1334,14 +1334,11 @@ static int processcompl(struct async *as, void __user * __user *arg)
 		}
 	}
 
-	free_async(as);
-
 	if (put_user(addr, (void __user * __user *)arg))
 		return -EFAULT;
 	return 0;
 
 err_out:
-	free_async(as);
 	return -EFAULT;
 }
 
@@ -1371,8 +1368,11 @@ static struct async *reap_as(struct dev_state *ps)
 static int proc_reapurb(struct dev_state *ps, void __user *arg)
 {
 	struct async *as = reap_as(ps);
-	if (as)
-		return processcompl(as, (void __user * __user *)arg);
+	if (as) {
+		int retval = processcompl(as, (void __user * __user *)arg);
+		free_async(as);
+		return retval;
+	}
 	if (signal_pending(current))
 		return -EINTR;
 	return -EIO;
@@ -1380,11 +1380,16 @@ static int proc_reapurb(struct dev_state *ps, void __user *arg)
 
 static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg)
 {
+	int retval;
 	struct async *as;
 
-	if (!(as = async_getcompleted(ps)))
-		return -EAGAIN;
-	return processcompl(as, (void __user * __user *)arg);
+	as = async_getcompleted(ps);
+	retval = -EAGAIN;
+	if (as) {
+		retval = processcompl(as, (void __user * __user *)arg);
+		free_async(as);
+	}
+	return retval;
 }
 
 #ifdef CONFIG_COMPAT
@@ -1475,9 +1480,9 @@ static int processcompl_compat(struct async *as, void __user * __user *arg)
 	void __user *addr = as->userurb;
 	unsigned int i;
 
-	if (as->userbuffer)
+	if (as->userbuffer && urb->actual_length)
 		if (copy_to_user(as->userbuffer, urb->transfer_buffer,
-				 urb->transfer_buffer_length))
+				 urb->actual_length))
 			return -EFAULT;
 	if (put_user(as->status, &userurb->status))
 		return -EFAULT;
@@ -1497,7 +1502,6 @@ static int processcompl_compat(struct async *as, void __user * __user *arg)
 		}
 	}
 
-	free_async(as);
 	if (put_user(ptr_to_compat(addr), (u32 __user *)arg))
 		return -EFAULT;
 	return 0;
@@ -1506,8 +1510,11 @@ static int processcompl_compat(struct async *as, void __user * __user *arg)
 static int proc_reapurb_compat(struct dev_state *ps, void __user *arg)
 {
 	struct async *as = reap_as(ps);
-	if (as)
-		return processcompl_compat(as, (void __user * __user *)arg);
+	if (as) {
+		int retval = processcompl_compat(as, (void __user * __user *)arg);
+		free_async(as);
+		return retval;
+	}
 	if (signal_pending(current))
 		return -EINTR;
 	return -EIO;
@@ -1515,11 +1522,16 @@ static int proc_reapurb_compat(struct dev_state *ps, void __user *arg)
 
 static int proc_reapurbnonblock_compat(struct dev_state *ps, void __user *arg)
 {
+	int retval;
 	struct async *as;
 
-	if (!(as = async_getcompleted(ps)))
-		return -EAGAIN;
-	return processcompl_compat(as, (void __user * __user *)arg);
+	retval = -EAGAIN;
+	as = async_getcompleted(ps);
+	if (as) {
+		retval = processcompl_compat(as, (void __user * __user *)arg);
+		free_async(as);
+	}
+	return retval;
 }
 
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 0495fa651225..80995ef0868c 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1684,6 +1684,24 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev,
 		}
 	}
 	if (cur_alt && new_alt) {
+		struct usb_interface *iface = usb_ifnum_to_if(udev,
+				cur_alt->desc.bInterfaceNumber);
+
+		if (iface->resetting_device) {
+			/*
+			 * The USB core just reset the device, so the xHCI host
+			 * and the device will think alt setting 0 is installed.
+			 * However, the USB core will pass in the alternate
+			 * setting installed before the reset as cur_alt.  Dig
+			 * out the alternate setting 0 structure, or the first
+			 * alternate setting if a broken device doesn't have alt
+			 * setting 0.
+			 */
+			cur_alt = usb_altnum_to_altsetting(iface, 0);
+			if (!cur_alt)
+				cur_alt = &iface->altsetting[0];
+		}
+
 		/* Drop all the endpoints in the current alt setting */
 		for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
 			ret = hcd->driver->drop_endpoint(hcd, udev,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0cec6caf6e9b..35cc8b9ba1f5 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3347,6 +3347,9 @@ static void hub_events(void)
 					USB_PORT_FEAT_C_SUSPEND);
 				udev = hdev->children[i-1];
 				if (udev) {
+					/* TRSMRCY = 10 msec */
+					msleep(10);
+
 					usb_lock_device(udev);
 					ret = remote_wakeup(hdev->
 							children[i-1]);
@@ -3692,19 +3695,14 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 			usb_enable_interface(udev, intf, true);
 			ret = 0;
 		} else {
-			/* We've just reset the device, so it will think alt
-			 * setting 0 is installed.  For usb_set_interface() to
-			 * work properly, we need to set the current alternate
-			 * interface setting to 0 (or the first alt setting, if
-			 * the device doesn't have alt setting 0).
+			/* Let the bandwidth allocation function know that this
+			 * device has been reset, and it will have to use
+			 * alternate setting 0 as the current alternate setting.
 			 */
-			intf->cur_altsetting =
-				usb_find_alt_setting(config, i, 0);
-			if (!intf->cur_altsetting)
-				intf->cur_altsetting =
-					&config->intf_cache[i]->altsetting[0];
+			intf->resetting_device = 1;
 			ret = usb_set_interface(udev, desc->bInterfaceNumber,
 					desc->bAlternateSetting);
+			intf->resetting_device = 0;
 		}
 		if (ret < 0) {
 			dev_err(&udev->dev, "failed to restore interface %d "
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 1b994846e8e0..9bc95fec793f 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -906,11 +906,11 @@ char *usb_cache_string(struct usb_device *udev, int index)
 	if (index <= 0)
 		return NULL;
 
-	buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL);
+	buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO);
 	if (buf) {
 		len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
 		if (len > 0) {
-			smallbuf = kmalloc(++len, GFP_KERNEL);
+			smallbuf = kmalloc(++len, GFP_NOIO);
 			if (!smallbuf)
 				return buf;
 			memcpy(smallbuf, buf, len);
@@ -1731,7 +1731,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 	if (cp) {
 		nintf = cp->desc.bNumInterfaces;
 		new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
-				GFP_KERNEL);
+				GFP_NOIO);
 		if (!new_interfaces) {
 			dev_err(&dev->dev, "Out of memory\n");
 			return -ENOMEM;
@@ -1740,7 +1740,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 		for (; n < nintf; ++n) {
 			new_interfaces[n] = kzalloc(
 					sizeof(struct usb_interface),
-					GFP_KERNEL);
+					GFP_NOIO);
 			if (!new_interfaces[n]) {
 				dev_err(&dev->dev, "Out of memory\n");
 				ret = -ENOMEM;
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 485edf937f25..5f3908f6e2dc 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -115,6 +115,12 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf)
 	case USB_SPEED_HIGH:
 		speed = "480";
 		break;
+	case USB_SPEED_VARIABLE:
+		speed = "480";
+		break;
+	case USB_SPEED_SUPER:
+		speed = "5000";
+		break;
 	default:
 		speed = "unknown";
 	}
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 0a577d5694fd..d4f0db58a8ad 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -358,7 +358,7 @@ done:
 	 * b15:		bmType (0 == data)
 	 */
 	len = skb->len;
-	put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2));
+	put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2));
 
 	/* add a zero-length EEM packet, if needed */
 	if (padlen)
@@ -464,7 +464,6 @@ static int eem_unwrap(struct gether *port,
 			}
 
 			/* validate CRC */
-			crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN);
 			if (header & BIT(14)) {
 				crc = get_unaligned_le32(skb->data + len
 							- ETH_FCS_LEN);
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 429560100b10..76496f5d272c 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -29,7 +29,7 @@
 #if defined USB_ETH_RNDIS
 #  undef USB_ETH_RNDIS
 #endif
-#ifdef CONFIG_USB_ETH_RNDIS
+#ifdef CONFIG_USB_G_MULTI_RNDIS
 #  define USB_ETH_RNDIS y
 #endif
 
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index e220fb8091a3..8b45145b9136 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -26,6 +26,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 4b5dbd0127f5..5fc80a104150 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2582,6 +2582,7 @@ err:
 	hsotg->gadget.dev.driver = NULL;
 	return ret;
 }
+EXPORT_SYMBOL(usb_gadget_register_driver);
 
 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 {
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5859522d6edd..1ec3857f22e6 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -787,9 +787,10 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 
 			/* start 20 msec resume signaling from this port,
 			 * and make khubd collect PORT_STAT_C_SUSPEND to
-			 * stop that signaling.
+			 * stop that signaling.  Use 5 ms extra for safety,
+			 * like usb_port_resume() does.
 			 */
-			ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
+			ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
 			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
 			mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
 		}
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 2c6571c05f35..19372673bf09 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -120,9 +120,26 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	del_timer_sync(&ehci->watchdog);
 	del_timer_sync(&ehci->iaa_watchdog);
 
-	port = HCS_N_PORTS (ehci->hcs_params);
 	spin_lock_irq (&ehci->lock);
 
+	/* Once the controller is stopped, port resumes that are already
+	 * in progress won't complete.  Hence if remote wakeup is enabled
+	 * for the root hub and any ports are in the middle of a resume or
+	 * remote wakeup, we must fail the suspend.
+	 */
+	if (hcd->self.root_hub->do_remote_wakeup) {
+		port = HCS_N_PORTS(ehci->hcs_params);
+		while (port--) {
+			if (ehci->reset_done[port] != 0) {
+				spin_unlock_irq(&ehci->lock);
+				ehci_dbg(ehci, "suspend failed because "
+						"port %d is resuming\n",
+						port + 1);
+				return -EBUSY;
+			}
+		}
+	}
+
 	/* stop schedules, clean any completed work */
 	if (HC_IS_RUNNING(hcd->state)) {
 		ehci_quiesce (ehci);
@@ -138,6 +155,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	 */
 	ehci->bus_suspended = 0;
 	ehci->owned_ports = 0;
+	port = HCS_N_PORTS(ehci->hcs_params);
 	while (port--) {
 		u32 __iomem	*reg = &ehci->regs->port_status [port];
 		u32		t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
@@ -178,7 +196,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 			if (hostpc_reg) {
 				u32	t3;
 
+				spin_unlock_irq(&ehci->lock);
 				msleep(5);/* 5ms for HCD enter low pwr mode */
+				spin_lock_irq(&ehci->lock);
 				t3 = ehci_readl(ehci, hostpc_reg);
 				ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
 				t3 = ehci_readl(ehci, hostpc_reg);
@@ -886,17 +906,18 @@ static int ehci_hub_control (
 			if ((temp & PORT_PE) == 0
 					|| (temp & PORT_RESET) != 0)
 				goto error;
-			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
 			/* After above check the port must be connected.
 			 * Set appropriate bit thus could put phy into low power
 			 * mode if we have hostpc feature
 			 */
+			temp &= ~PORT_WKCONN_E;
+			temp |= PORT_WKDISC_E | PORT_WKOC_E;
+			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
 			if (hostpc_reg) {
-				temp &= ~PORT_WKCONN_E;
-				temp |= (PORT_WKDISC_E | PORT_WKOC_E);
-				ehci_writel(ehci, temp | PORT_SUSPEND,
-							status_reg);
+				spin_unlock_irqrestore(&ehci->lock, flags);
 				msleep(5);/* 5ms for HCD enter low pwr mode */
+				spin_lock_irqsave(&ehci->lock, flags);
 				temp1 = ehci_readl(ehci, hostpc_reg);
 				ehci_writel(ehci, temp1 | HOSTPC_PHCD,
 					hostpc_reg);
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index a427d3b00634..89521775c567 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -849,9 +849,10 @@ qh_make (
 				 * But interval 1 scheduling is simpler, and
 				 * includes high bandwidth.
 				 */
-				dbg ("intr period %d uframes, NYET!",
-						urb->interval);
-				goto done;
+				urb->interval = 1;
+			} else if (qh->period > ehci->periodic_size) {
+				qh->period = ehci->periodic_size;
+				urb->interval = qh->period << 3;
 			}
 		} else {
 			int		think_time;
@@ -874,6 +875,10 @@ qh_make (
 					usb_calc_bus_time (urb->dev->speed,
 					is_input, 0, max_packet (maxp)));
 			qh->period = urb->interval;
+			if (qh->period > ehci->periodic_size) {
+				qh->period = ehci->periodic_size;
+				urb->interval = qh->period;
+			}
 		}
 	}
 
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 0951818ef93b..78e7c3cfcb72 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -242,9 +242,10 @@ err:
 static void fhci_usb_free(void *lld)
 {
 	struct fhci_usb *usb = lld;
-	struct fhci_hcd *fhci = usb->fhci;
+	struct fhci_hcd *fhci;
 
 	if (usb) {
+		fhci = usb->fhci;
 		fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
 		fhci_ep0_free(usb);
 		kfree(usb->actual_frame);
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index d224ab467a40..e1232890c78b 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -105,7 +105,7 @@ void fhci_ep0_free(struct fhci_usb *usb)
 		if (ep->td_base)
 			cpm_muram_free(cpm_muram_offset(ep->td_base));
 
-		if (ep->conf_frame_Q) {
+		if (kfifo_initialized(&ep->conf_frame_Q)) {
 			size = cq_howmany(&ep->conf_frame_Q);
 			for (; size; size--) {
 				struct packet *pkt = cq_get(&ep->conf_frame_Q);
@@ -115,7 +115,7 @@ void fhci_ep0_free(struct fhci_usb *usb)
 			cq_delete(&ep->conf_frame_Q);
 		}
 
-		if (ep->empty_frame_Q) {
+		if (kfifo_initialized(&ep->empty_frame_Q)) {
 			size = cq_howmany(&ep->empty_frame_Q);
 			for (; size; size--) {
 				struct packet *pkt = cq_get(&ep->empty_frame_Q);
@@ -125,7 +125,7 @@ void fhci_ep0_free(struct fhci_usb *usb)
 			cq_delete(&ep->empty_frame_Q);
 		}
 
-		if (ep->dummy_packets_Q) {
+		if (kfifo_initialized(&ep->dummy_packets_Q)) {
 			size = cq_howmany(&ep->dummy_packets_Q);
 			for (; size; size--) {
 				u8 *buff = cq_get(&ep->dummy_packets_Q);
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 73352f3739b5..42971657fde2 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2270,10 +2270,10 @@ static int isp1362_mem_config(struct usb_hcd *hcd)
 	dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
 	dev_info(hcd->self.controller, "  ISTL:    2 * %4d:     %4d @ $%04x:$%04x\n",
 		 istl_size / 2, istl_size, 0, istl_size / 2);
-	dev_info(hcd->self.controller, "  INTL: %4d * (%3lu+8):  %4d @ $%04x\n",
+	dev_info(hcd->self.controller, "  INTL: %4d * (%3zu+8):  %4d @ $%04x\n",
 		 ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
 		 intl_size, istl_size);
-	dev_info(hcd->self.controller, "  ATL : %4d * (%3lu+8):  %4d @ $%04x\n",
+	dev_info(hcd->self.controller, "  ATL : %4d * (%3zu+8):  %4d @ $%04x\n",
 		 atl_buffers, atl_blksize - PTD_HEADER_SIZE,
 		 atl_size, istl_size + intl_size);
 	dev_info(hcd->self.controller, "  USED/FREE:   %4d      %4d\n", total,
@@ -2697,6 +2697,8 @@ static int __init isp1362_probe(struct platform_device *pdev)
 	void __iomem *data_reg;
 	int irq;
 	int retval = 0;
+	struct resource *irq_res;
+	unsigned int irq_flags = 0;
 
 	/* basic sanity checks first.  board-specific init logic should
 	 * have initialized this the three resources and probably board
@@ -2710,11 +2712,12 @@ static int __init isp1362_probe(struct platform_device *pdev)
 
 	data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	irq = platform_get_irq(pdev, 0);
-	if (!addr || !data || irq < 0) {
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!addr || !data || !irq_res) {
 		retval = -ENODEV;
 		goto err1;
 	}
+	irq = irq_res->start;
 
 #ifdef CONFIG_USB_HCD_DMA
 	if (pdev->dev.dma_mask) {
@@ -2781,12 +2784,16 @@ static int __init isp1362_probe(struct platform_device *pdev)
 	}
 #endif
 
-#ifdef CONFIG_ARM
-	if (isp1362_hcd->board)
-		set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING);
-#endif
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+		irq_flags |= IRQF_TRIGGER_RISING;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+		irq_flags |= IRQF_TRIGGER_FALLING;
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+		irq_flags |= IRQF_TRIGGER_HIGH;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+		irq_flags |= IRQF_TRIGGER_LOW;
 
-	retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED);
+	retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED);
 	if (retval != 0)
 		goto err6;
 	pr_info("%s, irq %d\n", hcd->product_desc, irq);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 9600a58299db..27b8f7cb4471 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1039,12 +1039,12 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 		if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
 			u32 buffstatus;
 
-			/* XXX
+			/*
 			 * NAKs are handled in HW by the chip. Usually if the
 			 * device is not able to send data fast enough.
-			 * This did not trigger for a long time now.
+			 * This happens mostly on slower hardware.
 			 */
-			printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
+			printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
 					"%d of %zu done: %08x cur: %08x\n", qtd,
 					urb, qh, PTD_XFERRED_LENGTH(dw3),
 					qtd->length, done_map,
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index b7a661c02bcd..bee558aed427 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -35,7 +35,9 @@
 #include <linux/usb.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/mm.h>
 #include <linux/irq.h>
+#include <asm/cacheflush.h>
 
 #include "../core/hcd.h"
 #include "r8a66597.h"
@@ -216,8 +218,17 @@ static void disable_controller(struct r8a66597 *r8a66597)
 {
 	int port;
 
+	/* disable interrupts */
 	r8a66597_write(r8a66597, 0, INTENB0);
-	r8a66597_write(r8a66597, 0, INTSTS0);
+	r8a66597_write(r8a66597, 0, INTENB1);
+	r8a66597_write(r8a66597, 0, BRDYENB);
+	r8a66597_write(r8a66597, 0, BEMPENB);
+	r8a66597_write(r8a66597, 0, NRDYENB);
+
+	/* clear status */
+	r8a66597_write(r8a66597, 0, BRDYSTS);
+	r8a66597_write(r8a66597, 0, NRDYSTS);
+	r8a66597_write(r8a66597, 0, BEMPSTS);
 
 	for (port = 0; port < r8a66597->max_root_hub; port++)
 		r8a66597_disable_port(r8a66597, port);
@@ -811,6 +822,26 @@ static void enable_r8a66597_pipe(struct r8a66597 *r8a66597, struct urb *urb,
 	enable_r8a66597_pipe_dma(r8a66597, dev, pipe, urb);
 }
 
+static void r8a66597_urb_done(struct r8a66597 *r8a66597, struct urb *urb,
+			      int status)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
+		void *ptr;
+
+		for (ptr = urb->transfer_buffer;
+		     ptr < urb->transfer_buffer + urb->transfer_buffer_length;
+		     ptr += PAGE_SIZE)
+			flush_dcache_page(virt_to_page(ptr));
+	}
+
+	usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb);
+	spin_unlock(&r8a66597->lock);
+	usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb, status);
+	spin_lock(&r8a66597->lock);
+}
+
 /* this function must be called with interrupt disabled */
 static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address)
 {
@@ -829,15 +860,9 @@ static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address)
 		list_del(&td->queue);
 		kfree(td);
 
-		if (urb) {
-			usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597),
-					urb);
+		if (urb)
+			r8a66597_urb_done(r8a66597, urb, -ENODEV);
 
-			spin_unlock(&r8a66597->lock);
-			usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb,
-					-ENODEV);
-			spin_lock(&r8a66597->lock);
-		}
 		break;
 	}
 }
@@ -997,6 +1022,8 @@ static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port,
 /* this function must be called with interrupt disabled */
 static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
 					u16 syssts)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
 {
 	if (syssts == SE0) {
 		r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
@@ -1014,7 +1041,9 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
 			usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
 	}
 
+	spin_unlock(&r8a66597->lock);
 	usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597));
+	spin_lock(&r8a66597->lock);
 }
 
 /* this function must be called with interrupt disabled */
@@ -1274,10 +1303,7 @@ __releases(r8a66597->lock) __acquires(r8a66597->lock)
 		if (usb_pipeisoc(urb->pipe))
 			urb->start_frame = r8a66597_get_frame(hcd);
 
-		usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb);
-		spin_unlock(&r8a66597->lock);
-		usb_hcd_giveback_urb(hcd, urb, status);
-		spin_lock(&r8a66597->lock);
+		r8a66597_urb_done(r8a66597, urb, status);
 	}
 
 	if (restart) {
@@ -2466,6 +2492,12 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	r8a66597->rh_timer.data = (unsigned long)r8a66597;
 	r8a66597->reg = (unsigned long)reg;
 
+	/* make sure no interrupts are pending */
+	ret = r8a66597_clock_enable(r8a66597);
+	if (ret < 0)
+		goto clean_up3;
+	disable_controller(r8a66597);
+
 	for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
 		INIT_LIST_HEAD(&r8a66597->pipe_queue[i]);
 		init_timer(&r8a66597->td_timer[i]);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 5cd0e48f67fb..99cd00fd3514 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -749,7 +749,20 @@ static int uhci_rh_suspend(struct usb_hcd *hcd)
 	spin_lock_irq(&uhci->lock);
 	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
 		rc = -ESHUTDOWN;
-	else if (!uhci->dead)
+	else if (uhci->dead)
+		;		/* Dead controllers tell no tales */
+
+	/* Once the controller is stopped, port resumes that are already
+	 * in progress won't complete.  Hence if remote wakeup is enabled
+	 * for the root hub and any ports are in the middle of a resume or
+	 * remote wakeup, we must fail the suspend.
+	 */
+	else if (hcd->self.root_hub->do_remote_wakeup &&
+			uhci->resuming_ports) {
+		dev_dbg(uhci_dev(uhci), "suspend failed because a port "
+				"is resuming\n");
+		rc = -EBUSY;
+	} else
 		suspend_rh(uhci, UHCI_RH_SUSPENDED);
 	spin_unlock_irq(&uhci->lock);
 	return rc;
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 885b585360b9..8270055848ca 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -167,7 +167,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci)
 				/* Port received a wakeup request */
 				set_bit(port, &uhci->resuming_ports);
 				uhci->ports_timeout = jiffies +
-						msecs_to_jiffies(20);
+						msecs_to_jiffies(25);
 
 				/* Make sure we see the port again
 				 * after the resuming period is over. */
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 0025847743f3..8b37a4b9839e 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3245,6 +3245,7 @@ static struct usb_device_id sisusb_table [] = {
 	{ USB_DEVICE(0x0711, 0x0902) },
 	{ USB_DEVICE(0x0711, 0x0903) },
 	{ USB_DEVICE(0x0711, 0x0918) },
+	{ USB_DEVICE(0x0711, 0x0920) },
 	{ USB_DEVICE(0x182d, 0x021c) },
 	{ USB_DEVICE(0x182d, 0x0269) },
 	{ }
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index de56b3d743d7..3d2d3e549bd1 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -44,6 +44,7 @@ config ISP1301_OMAP
 config USB_ULPI
 	bool "Generic ULPI Transceiver Driver"
 	depends on ARM
+	select USB_OTG_UTILS
 	help
 	  Enable this to support ULPI connected USB OTG transceivers which
 	  are likely found on embedded boards.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 216f187582ab..7638828e7317 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -50,7 +50,7 @@
  * Version Information
  */
 #define DRIVER_VERSION "v1.5.0"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr"
 #define DRIVER_DESC "USB FTDI Serial Converters Driver"
 
 static int debug;
@@ -145,10 +145,15 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 
 
 
+/*
+ * Device ID not listed? Test via module params product/vendor or
+ * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
+ */
 static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -552,9 +557,16 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
 	/*
-	 * Due to many user requests for multiple ELV devices we enable
-	 * them by default.
+	 * ELV devices:
 	 */
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
@@ -571,11 +583,17 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -697,6 +715,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index da92b4952ffb..c8951aeed983 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -38,6 +38,8 @@
 /* www.candapter.com Ewert Energy Systems CANdapter device */
 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
 
+#define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
+
 /* OOCDlink by Joern Kaipf <joernk@web.de>
  * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
 #define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
@@ -161,22 +163,37 @@
 /*
  * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
  * All of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
  *
  * The previously included PID for the UO 100 module was incorrect.
  * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
  *
  * Armin Laeuger originally sent the PID for the UM 100 module.
  */
+#define FTDI_ELV_USR_PID	0xE000	/* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID	0xE001	/* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID	0xE002	/* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID	0xE004	/* WS 550 */
+#define FTDI_ELV_EC3000_PID	0xE006	/* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID	0xE008	/* WS 888 */
+#define FTDI_ELV_TWS550_PID	0xE009	/* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID	0xE00A	/* Funk Energie Monitor */
 #define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
 #define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
 #define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
+#define FTDI_ELV_UMS100_PID	0xE0EB	/* ELV USB Master-Slave Schaltsteckdose UMS 100 */
+#define FTDI_ELV_TFD128_PID	0xE0EC	/* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
+#define FTDI_ELV_FM3RX_PID	0xE0ED	/* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID	0xE0EE	/* Conrad WS 777 */
 #define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
 #define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
 #define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
 #define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
 #define FTDI_ELV_RFP500_PID	0xE0F3	/* HF-Leistungsmesser (RFP 500) */
 #define FTDI_ELV_FS20SIG_PID	0xE0F4	/* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID	0xE0F5	/* ELV UTP 8 */
 #define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID	0xE0F7	/* Conrad WS 444 PC */
 #define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
 #define FTDI_ELV_UAD8_PID	0xF068	/* USB-AD-Wandler (UAD 8) */
 #define FTDI_ELV_UDA7_PID	0xF069	/* USB-DA-Wandler (UDA 7) */
@@ -968,6 +985,7 @@
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
 #define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
+#define PAPOUCH_AD4USB_PID		0x8003	/* AD4USB Measurement Module */
 
 /*
  * Marvell SheevaPlug
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index f1ea3a33b6e6..83443d6306d6 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -386,12 +386,12 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (serial->type->max_in_flight_urbs) {
-		spin_lock_irqsave(&port->lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	if (serial->type->max_in_flight_urbs)
 		chars = port->tx_bytes_flight;
-		spin_unlock_irqrestore(&port->lock, flags);
-	} else if (serial->num_bulk_out)
+	else if (serial->num_bulk_out)
 		chars = kfifo_len(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	dbg("%s - returns %d", __func__, chars);
 	return chars;
@@ -489,6 +489,8 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
 	dbg("%s - port %d", __func__, port->number);
 
 	if (port->serial->type->max_in_flight_urbs) {
+		kfree(urb->transfer_buffer);
+
 		spin_lock_irqsave(&port->lock, flags);
 		--port->urbs_in_flight;
 		port->tx_bytes_flight -= urb->transfer_buffer_length;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ac1b6449fb6a..3eb6143bb646 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -298,6 +298,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+       { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
 	{ }
 };
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 64a0a2c27e12..49575fba3756 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -941,7 +941,7 @@ UNUSUAL_DEV(  0x07ab, 0xfccd, 0x0000, 0x9999,
 UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133,
 		"Microtech",
 		"USB-SCSI-DB25",
-		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ), 
 
 UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
@@ -1807,13 +1807,6 @@ UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_GO_SLOW ),
 
-/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
-UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
-		"INTOVA",
-		"Pixtreme",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_FIX_CAPACITY ),
-
 /* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
  * Mio Moov 330
  */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 5a53d4f0dd11..e9f995486ec1 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -434,7 +434,8 @@ static void adjust_quirks(struct us_data *us)
 	u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor);
 	u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
 	unsigned f = 0;
-	unsigned int mask = (US_FL_SANE_SENSE | US_FL_FIX_CAPACITY |
+	unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
+			US_FL_FIX_CAPACITY |
 			US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
 			US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
 			US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |