Merge branch 'dev-5.10' into dev-5.10-inteldev-5.10.46-intel

This is the 5.10.46 stable release.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>

5 files changed, 26 insertions, 4 deletions

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index b5f4e584f3c9..28a728f883bc 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -533,6 +533,12 @@ struct cp210x_single_port_config {
 #define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX	587
 #define CP210X_2NCONFIG_GPIO_CONTROL_IDX	600
 
+/* CP2102N QFN20 port configuration values */
+#define CP2102N_QFN20_GPIO2_TXLED_MODE		BIT(2)
+#define CP2102N_QFN20_GPIO3_RXLED_MODE		BIT(3)
+#define CP2102N_QFN20_GPIO1_RS485_MODE		BIT(4)
+#define CP2102N_QFN20_GPIO0_CLK_MODE		BIT(6)
+
 /* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */
 struct cp210x_gpio_write {
 	u8	mask;
@@ -1884,7 +1890,19 @@ static int cp2102n_gpioconf_init(struct usb_serial *serial)
 	priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f;
 
 	/* 0 indicates GPIO mode, 1 is alternate function */
-	priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
+	if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN20) {
+		/* QFN20 is special... */
+		if (gpio_ctrl & CP2102N_QFN20_GPIO0_CLK_MODE)   /* GPIO 0 */
+			priv->gpio_altfunc |= BIT(0);
+		if (gpio_ctrl & CP2102N_QFN20_GPIO1_RS485_MODE) /* GPIO 1 */
+			priv->gpio_altfunc |= BIT(1);
+		if (gpio_ctrl & CP2102N_QFN20_GPIO2_TXLED_MODE) /* GPIO 2 */
+			priv->gpio_altfunc |= BIT(2);
+		if (gpio_ctrl & CP2102N_QFN20_GPIO3_RXLED_MODE) /* GPIO 3 */
+			priv->gpio_altfunc |= BIT(3);
+	} else {
+		priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
+	}
 
 	if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) {
 		/*
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 7c64b6ee5c19..1aef9b1e1c4e 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -611,6 +611,7 @@ static const struct usb_device_id id_table_combined[] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index d854e04a4286..add602bebd82 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -581,6 +581,7 @@
 #define FTDI_NT_ORIONLXM_PID		0x7c90	/* OrionLXm Substation Automation Platform */
 #define FTDI_NT_ORIONLX_PLUS_PID	0x7c91	/* OrionLX+ Substation Automation Platform */
 #define FTDI_NT_ORION_IO_PID		0x7c92	/* Orion I/O */
+#define FTDI_NT_ORIONMX_PID		0x7c93	/* OrionMX */
 
 /*
  * Synapse Wireless product ids (FTDI_VID)
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 5b6e982a9376..ff02eff70416 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -26,6 +26,7 @@
 
 #define ZYXEL_VENDOR_ID		0x0586
 #define ZYXEL_OMNINET_ID	0x1000
+#define ZYXEL_OMNI_56K_PLUS_ID	0x1500
 /* This one seems to be a re-branded ZyXEL device */
 #define BT_IGNITIONPRO_ID	0x2000
 
@@ -40,6 +41,7 @@ static int omninet_port_remove(struct usb_serial_port *port);
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
+	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) },
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
 	{ }						/* Terminating entry */
 };
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 872d1bc86ab4..a2c3c0944f99 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -416,7 +416,7 @@ static void qt2_close(struct usb_serial_port *port)
 
 	/* flush the port transmit buffer */
 	i = usb_control_msg(serial->dev,
-			    usb_rcvctrlpipe(serial->dev, 0),
+			    usb_sndctrlpipe(serial->dev, 0),
 			    QT2_FLUSH_DEVICE, 0x40, 1,
 			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 
@@ -426,7 +426,7 @@ static void qt2_close(struct usb_serial_port *port)
 
 	/* flush the port receive buffer */
 	i = usb_control_msg(serial->dev,
-			    usb_rcvctrlpipe(serial->dev, 0),
+			    usb_sndctrlpipe(serial->dev, 0),
 			    QT2_FLUSH_DEVICE, 0x40, 0,
 			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 
@@ -654,7 +654,7 @@ static int qt2_attach(struct usb_serial *serial)
 	int status;
 
 	/* power on unit */
-	status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+	status = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				 0xc2, 0x40, 0x8000, 0, NULL, 0,
 				 QT2_USB_TIMEOUT);
 	if (status < 0) {