USB: digi_acceleport: remove bogus disconnect test in close

Remove bogus (and unnecessary) test for serial->dev being NULL in close.

The device is never cleared, and close is never called after a completed
disconnect anyway.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 45 insertions, 47 deletions

diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index ebe45fa0ed50..76a8c202a8e2 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1149,53 +1149,51 @@ static void digi_close(struct usb_serial_port *port)
 	if (port->serial->disconnected)
 		goto exit;
 
-	if (port->serial->dev) {
-		/* FIXME: Transmit idle belongs in the wait_unti_sent path */
-		digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
-
-		/* disable input flow control */
-		buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
-		buf[1] = priv->dp_port_num;
-		buf[2] = DIGI_DISABLE;
-		buf[3] = 0;
-
-		/* disable output flow control */
-		buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
-		buf[5] = priv->dp_port_num;
-		buf[6] = DIGI_DISABLE;
-		buf[7] = 0;
-
-		/* disable reading modem signals automatically */
-		buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
-		buf[9] = priv->dp_port_num;
-		buf[10] = DIGI_DISABLE;
-		buf[11] = 0;
-
-		/* disable receive */
-		buf[12] = DIGI_CMD_RECEIVE_ENABLE;
-		buf[13] = priv->dp_port_num;
-		buf[14] = DIGI_DISABLE;
-		buf[15] = 0;
-
-		/* flush fifos */
-		buf[16] = DIGI_CMD_IFLUSH_FIFO;
-		buf[17] = priv->dp_port_num;
-		buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
-		buf[19] = 0;
-
-		ret = digi_write_oob_command(port, buf, 20, 0);
-		if (ret != 0)
-			dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n", ret);
-
-		/* wait for final commands on oob port to complete */
-		prepare_to_wait(&priv->dp_flush_wait, &wait,
-							TASK_INTERRUPTIBLE);
-		schedule_timeout(DIGI_CLOSE_TIMEOUT);
-		finish_wait(&priv->dp_flush_wait, &wait);
-
-		/* shutdown any outstanding bulk writes */
-		usb_kill_urb(port->write_urb);
-	}
+	/* FIXME: Transmit idle belongs in the wait_unti_sent path */
+	digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
+
+	/* disable input flow control */
+	buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
+	buf[1] = priv->dp_port_num;
+	buf[2] = DIGI_DISABLE;
+	buf[3] = 0;
+
+	/* disable output flow control */
+	buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
+	buf[5] = priv->dp_port_num;
+	buf[6] = DIGI_DISABLE;
+	buf[7] = 0;
+
+	/* disable reading modem signals automatically */
+	buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
+	buf[9] = priv->dp_port_num;
+	buf[10] = DIGI_DISABLE;
+	buf[11] = 0;
+
+	/* disable receive */
+	buf[12] = DIGI_CMD_RECEIVE_ENABLE;
+	buf[13] = priv->dp_port_num;
+	buf[14] = DIGI_DISABLE;
+	buf[15] = 0;
+
+	/* flush fifos */
+	buf[16] = DIGI_CMD_IFLUSH_FIFO;
+	buf[17] = priv->dp_port_num;
+	buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
+	buf[19] = 0;
+
+	ret = digi_write_oob_command(port, buf, 20, 0);
+	if (ret != 0)
+		dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n",
+									ret);
+	/* wait for final commands on oob port to complete */
+	prepare_to_wait(&priv->dp_flush_wait, &wait,
+			TASK_INTERRUPTIBLE);
+	schedule_timeout(DIGI_CLOSE_TIMEOUT);
+	finish_wait(&priv->dp_flush_wait, &wait);
+
+	/* shutdown any outstanding bulk writes */
+	usb_kill_urb(port->write_urb);
 exit:
 	spin_lock_irq(&priv->dp_port_lock);
 	priv->dp_write_urb_in_use = 0;