Merge tag 'v4.4.33' into dev-4.4openbmc-4.4-20161121-1dev-4.4

This is the 4.4.33 stable release

Signed-off-by: Joel Stanley <joel@jms.id.au>

3 files changed, 30 insertions, 6 deletions

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index a5d319e4aae6..8435c3f204c1 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -440,7 +440,7 @@ static int dw8250_probe(struct platform_device *pdev)
 	}
 
 	data->pclk = devm_clk_get(&pdev->dev, "apb_pclk");
-	if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER) {
+	if (IS_ERR(data->pclk) && PTR_ERR(data->pclk) == -EPROBE_DEFER) {
 		err = -EPROBE_DEFER;
 		goto err_clk;
 	}
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 7b5462eb8388..e0b89b961e1b 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2075,6 +2075,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
 static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 			      struct ktermios *old)
 {
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	unsigned long flags;
 	unsigned int old_mode, mode, imr, quot, baud;
 
@@ -2178,11 +2179,29 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 		mode |= ATMEL_US_USMODE_RS485;
 	} else if (termios->c_cflag & CRTSCTS) {
 		/* RS232 with hardware handshake (RTS/CTS) */
-		if (atmel_use_dma_rx(port) && !atmel_use_fifo(port)) {
-			dev_info(port->dev, "not enabling hardware flow control because DMA is used");
-			termios->c_cflag &= ~CRTSCTS;
-		} else {
+		if (atmel_use_fifo(port) &&
+		    !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) {
+			/*
+			 * with ATMEL_US_USMODE_HWHS set, the controller will
+			 * be able to drive the RTS pin high/low when the RX
+			 * FIFO is above RXFTHRES/below RXFTHRES2.
+			 * It will also disable the transmitter when the CTS
+			 * pin is high.
+			 * This mode is not activated if CTS pin is a GPIO
+			 * because in this case, the transmitter is always
+			 * disabled (there must be an internal pull-up
+			 * responsible for this behaviour).
+			 * If the RTS pin is a GPIO, the controller won't be
+			 * able to drive it according to the FIFO thresholds,
+			 * but it will be handled by the driver.
+			 */
 			mode |= ATMEL_US_USMODE_HWHS;
+		} else {
+			/*
+			 * For platforms without FIFO, the flow control is
+			 * handled by the driver.
+			 */
+			mode |= ATMEL_US_USMODE_NORMAL;
 		}
 	} else {
 		/* RS232 without hadware handshake */
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 136ebaaa9cc0..5ab54ef4f304 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -872,10 +872,15 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 	if (new_cols == vc->vc_cols && new_rows == vc->vc_rows)
 		return 0;
 
+	if (new_screen_size > (4 << 20))
+		return -EINVAL;
 	newscreen = kmalloc(new_screen_size, GFP_USER);
 	if (!newscreen)
 		return -ENOMEM;
 
+	if (vc == sel_cons)
+		clear_selection();
+
 	old_rows = vc->vc_rows;
 	old_row_size = vc->vc_size_row;
 
@@ -1173,7 +1178,7 @@ static void csi_J(struct vc_data *vc, int vpar)
 			break;
 		case 3: /* erase scroll-back buffer (and whole display) */
 			scr_memsetw(vc->vc_screenbuf, vc->vc_video_erase_char,
-				    vc->vc_screenbuf_size >> 1);
+				    vc->vc_screenbuf_size);
 			set_origin(vc);
 			if (CON_IS_VISIBLE(vc))
 				update_screen(vc);