Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...

1 files changed, 477 insertions, 0 deletions

diff --git a/drivers/slimbus/stream.c b/drivers/slimbus/stream.c
new file mode 100644
index 000000000000..2fa05324ed07
--- /dev/null
+++ b/drivers/slimbus/stream.c
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/slimbus.h>
+#include <uapi/sound/asound.h>
+#include "slimbus.h"
+
+/**
+ * struct segdist_code - Segment Distributions code from
+ *	Table 20 of SLIMbus Specs Version 2.0
+ *
+ * @ratem: Channel Rate Multipler(Segments per Superframe)
+ * @seg_interval: Number of slots between the first Slot of Segment
+ *		and the first slot of the next  consecutive Segment.
+ * @segdist_code: Segment Distribution Code SD[11:0]
+ * @seg_offset_mask: Segment offset mask in SD[11:0]
+ * @segdist_codes: List of all possible Segmet Distribution codes.
+ */
+static const struct segdist_code {
+	int ratem;
+	int seg_interval;
+	int segdist_code;
+	u32 seg_offset_mask;
+
+} segdist_codes[] = {
+	{1,	1536,	0x200,	 0xdff},
+	{2,	768,	0x100,	 0xcff},
+	{4,	384,	0x080,	 0xc7f},
+	{8,	192,	0x040,	 0xc3f},
+	{16,	96,	0x020,	 0xc1f},
+	{32,	48,	0x010,	 0xc0f},
+	{64,	24,	0x008,	 0xc07},
+	{128,	12,	0x004,	 0xc03},
+	{256,	6,	0x002,	 0xc01},
+	{512,	3,	0x001,	 0xc00},
+	{3,	512,	0xe00,	 0x1ff},
+	{6,	256,	0xd00,	 0x0ff},
+	{12,	128,	0xc80,	 0x07f},
+	{24,	64,	0xc40,	 0x03f},
+	{48,	32,	0xc20,	 0x01f},
+	{96,	16,	0xc10,	 0x00f},
+	{192,	8,	0xc08,	 0x007},
+	{364,	4,	0xc04,	 0x003},
+	{768,	2,	0xc02,	 0x001},
+};
+
+/*
+ * Presence Rate table for all Natural Frequencies
+ * The Presence rate of a constant bitrate stream is mean flow rate of the
+ * stream expressed in occupied Segments of that Data Channel per second.
+ * Table 66 from SLIMbus 2.0 Specs
+ *
+ * Index of the table corresponds to Presence rate code for the respective rate
+ * in the table.
+ */
+static const int slim_presence_rate_table[] = {
+	0, /* Not Indicated */
+	12000,
+	24000,
+	48000,
+	96000,
+	192000,
+	384000,
+	768000,
+	0, /* Reserved */
+	110250,
+	220500,
+	441000,
+	882000,
+	176400,
+	352800,
+	705600,
+	4000,
+	8000,
+	16000,
+	32000,
+	64000,
+	128000,
+	256000,
+	512000,
+};
+
+/*
+ * slim_stream_allocate() - Allocate a new SLIMbus Stream
+ * @dev:Slim device to be associated with
+ * @name: name of the stream
+ *
+ * This is very first call for SLIMbus streaming, this API will allocate
+ * a new SLIMbus stream and return a valid stream runtime pointer for client
+ * to use it in subsequent stream apis. state of stream is set to ALLOCATED
+ *
+ * Return: valid pointer on success and error code on failure.
+ * From ASoC DPCM framework, this state is linked to startup() operation.
+ */
+struct slim_stream_runtime *slim_stream_allocate(struct slim_device *dev,
+						 const char *name)
+{
+	struct slim_stream_runtime *rt;
+
+	rt = kzalloc(sizeof(*rt), GFP_KERNEL);
+	if (!rt)
+		return ERR_PTR(-ENOMEM);
+
+	rt->name = kasprintf(GFP_KERNEL, "slim-%s", name);
+	if (!rt->name) {
+		kfree(rt);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	rt->dev = dev;
+	spin_lock(&dev->stream_list_lock);
+	list_add_tail(&rt->node, &dev->stream_list);
+	spin_unlock(&dev->stream_list_lock);
+
+	return rt;
+}
+EXPORT_SYMBOL_GPL(slim_stream_allocate);
+
+static int slim_connect_port_channel(struct slim_stream_runtime *stream,
+				     struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[2];
+	struct slim_val_inf msg = {0, 2, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_CONNECT_SOURCE;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 6, stream->dev->laddr, &msg);
+
+	if (port->direction == SLIM_PORT_SINK)
+		txn.mc = SLIM_MSG_MC_CONNECT_SINK;
+
+	wbuf[0] = port->id;
+	wbuf[1] = port->ch.id;
+	port->ch.state = SLIM_CH_STATE_ASSOCIATED;
+	port->state = SLIM_PORT_UNCONFIGURED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_disconnect_port(struct slim_stream_runtime *stream,
+				struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[1];
+	struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_DISCONNECT_PORT;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg);
+
+	wbuf[0] = port->id;
+	port->ch.state = SLIM_CH_STATE_DISCONNECTED;
+	port->state = SLIM_PORT_DISCONNECTED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_deactivate_remove_channel(struct slim_stream_runtime *stream,
+					  struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[1];
+	struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_NEXT_DEACTIVATE_CHANNEL;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg);
+	int ret;
+
+	wbuf[0] = port->ch.id;
+	ret = slim_do_transfer(sdev->ctrl, &txn);
+	if (ret)
+		return ret;
+
+	txn.mc = SLIM_MSG_MC_NEXT_REMOVE_CHANNEL;
+	port->ch.state = SLIM_CH_STATE_REMOVED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_get_prate_code(int rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(slim_presence_rate_table); i++) {
+		if (rate == slim_presence_rate_table[i])
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+/*
+ * slim_stream_prepare() - Prepare a SLIMbus Stream
+ *
+ * @rt: instance of slim stream runtime to configure
+ * @cfg: new configuration for the stream
+ *
+ * This API will configure SLIMbus stream with config parameters from cfg.
+ * return zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to hw_params() operation.
+ */
+int slim_stream_prepare(struct slim_stream_runtime *rt,
+			struct slim_stream_config *cfg)
+{
+	struct slim_controller *ctrl = rt->dev->ctrl;
+	struct slim_port *port;
+	int num_ports, i, port_id;
+
+	if (rt->ports) {
+		dev_err(&rt->dev->dev, "Stream already Prepared\n");
+		return -EINVAL;
+	}
+
+	num_ports = hweight32(cfg->port_mask);
+	rt->ports = kcalloc(num_ports, sizeof(*port), GFP_KERNEL);
+	if (!rt->ports)
+		return -ENOMEM;
+
+	rt->num_ports = num_ports;
+	rt->rate = cfg->rate;
+	rt->bps = cfg->bps;
+	rt->direction = cfg->direction;
+
+	if (cfg->rate % ctrl->a_framer->superfreq) {
+		/*
+		 * data rate not exactly multiple of super frame,
+		 * use PUSH/PULL protocol
+		 */
+		if (cfg->direction == SNDRV_PCM_STREAM_PLAYBACK)
+			rt->prot = SLIM_PROTO_PUSH;
+		else
+			rt->prot = SLIM_PROTO_PULL;
+	} else {
+		rt->prot = SLIM_PROTO_ISO;
+	}
+
+	rt->ratem = cfg->rate/ctrl->a_framer->superfreq;
+
+	i = 0;
+	for_each_set_bit(port_id, &cfg->port_mask, SLIM_DEVICE_MAX_PORTS) {
+		port = &rt->ports[i];
+		port->state = SLIM_PORT_DISCONNECTED;
+		port->id = port_id;
+		port->ch.prrate = slim_get_prate_code(cfg->rate);
+		port->ch.id = cfg->chs[i];
+		port->ch.data_fmt = SLIM_CH_DATA_FMT_NOT_DEFINED;
+		port->ch.aux_fmt = SLIM_CH_AUX_FMT_NOT_APPLICABLE;
+		port->ch.state = SLIM_CH_STATE_ALLOCATED;
+
+		if (cfg->direction == SNDRV_PCM_STREAM_PLAYBACK)
+			port->direction = SLIM_PORT_SINK;
+		else
+			port->direction = SLIM_PORT_SOURCE;
+
+		slim_connect_port_channel(rt, port);
+		i++;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_stream_prepare);
+
+static int slim_define_channel_content(struct slim_stream_runtime *stream,
+				       struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[4];
+	struct slim_val_inf msg = {0, 4, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_NEXT_DEFINE_CONTENT;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 8, stream->dev->laddr, &msg);
+
+	wbuf[0] = port->ch.id;
+	wbuf[1] = port->ch.prrate;
+
+	/* Frequency Locked for ISO Protocol */
+	if (stream->prot != SLIM_PROTO_ISO)
+		wbuf[1] |= SLIM_CHANNEL_CONTENT_FL;
+
+	wbuf[2] = port->ch.data_fmt | (port->ch.aux_fmt << 4);
+	wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS;
+	port->ch.state = SLIM_CH_STATE_CONTENT_DEFINED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_get_segdist_code(int ratem)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(segdist_codes); i++) {
+		if (segdist_codes[i].ratem == ratem)
+			return segdist_codes[i].segdist_code;
+	}
+
+	return -EINVAL;
+}
+
+static int slim_define_channel(struct slim_stream_runtime *stream,
+				       struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[4];
+	struct slim_val_inf msg = {0, 4, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_NEXT_DEFINE_CHANNEL;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 8, stream->dev->laddr, &msg);
+
+	port->ch.seg_dist = slim_get_segdist_code(stream->ratem);
+
+	wbuf[0] = port->ch.id;
+	wbuf[1] = port->ch.seg_dist & 0xFF;
+	wbuf[2] = (stream->prot << 4) | ((port->ch.seg_dist & 0xF00) >> 8);
+	if (stream->prot == SLIM_PROTO_ISO)
+		wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS;
+	else
+		wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS + 1;
+
+	port->ch.state = SLIM_CH_STATE_DEFINED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_activate_channel(struct slim_stream_runtime *stream,
+				 struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[1];
+	struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_NEXT_ACTIVATE_CHANNEL;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg);
+
+	txn.msg->num_bytes = 1;
+	txn.msg->wbuf = wbuf;
+	wbuf[0] = port->ch.id;
+	port->ch.state = SLIM_CH_STATE_ACTIVE;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+/*
+ * slim_stream_enable() - Enable a prepared SLIMbus Stream
+ *
+ * @stream: instance of slim stream runtime to enable
+ *
+ * This API will enable all the ports and channels associated with
+ * SLIMbus stream
+ *
+ * Return: zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to trigger() start operation.
+ */
+int slim_stream_enable(struct slim_stream_runtime *stream)
+{
+	DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION,
+				3, SLIM_LA_MANAGER, NULL);
+	struct slim_controller *ctrl = stream->dev->ctrl;
+	int ret, i;
+
+	if (ctrl->enable_stream) {
+		ret = ctrl->enable_stream(stream);
+		if (ret)
+			return ret;
+
+		for (i = 0; i < stream->num_ports; i++)
+			stream->ports[i].ch.state = SLIM_CH_STATE_ACTIVE;
+
+		return ret;
+	}
+
+	ret = slim_do_transfer(ctrl, &txn);
+	if (ret)
+		return ret;
+
+	/* define channels first before activating them */
+	for (i = 0; i < stream->num_ports; i++) {
+		struct slim_port *port = &stream->ports[i];
+
+		slim_define_channel(stream, port);
+		slim_define_channel_content(stream, port);
+	}
+
+	for (i = 0; i < stream->num_ports; i++) {
+		struct slim_port *port = &stream->ports[i];
+
+		slim_activate_channel(stream, port);
+		port->state = SLIM_PORT_CONFIGURED;
+	}
+	txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW;
+
+	return slim_do_transfer(ctrl, &txn);
+}
+EXPORT_SYMBOL_GPL(slim_stream_enable);
+
+/*
+ * slim_stream_disable() - Disable a SLIMbus Stream
+ *
+ * @stream: instance of slim stream runtime to disable
+ *
+ * This API will disable all the ports and channels associated with
+ * SLIMbus stream
+ *
+ * Return: zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to trigger() pause operation.
+ */
+int slim_stream_disable(struct slim_stream_runtime *stream)
+{
+	DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION,
+				3, SLIM_LA_MANAGER, NULL);
+	struct slim_controller *ctrl = stream->dev->ctrl;
+	int ret, i;
+
+	if (ctrl->disable_stream)
+		ctrl->disable_stream(stream);
+
+	ret = slim_do_transfer(ctrl, &txn);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < stream->num_ports; i++)
+		slim_deactivate_remove_channel(stream, &stream->ports[i]);
+
+	txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW;
+
+	return slim_do_transfer(ctrl, &txn);
+}
+EXPORT_SYMBOL_GPL(slim_stream_disable);
+
+/*
+ * slim_stream_unprepare() - Un-prepare a SLIMbus Stream
+ *
+ * @stream: instance of slim stream runtime to unprepare
+ *
+ * This API will un allocate all the ports and channels associated with
+ * SLIMbus stream
+ *
+ * Return: zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to trigger() stop operation.
+ */
+int slim_stream_unprepare(struct slim_stream_runtime *stream)
+{
+	int i;
+
+	for (i = 0; i < stream->num_ports; i++)
+		slim_disconnect_port(stream, &stream->ports[i]);
+
+	kfree(stream->ports);
+	stream->ports = NULL;
+	stream->num_ports = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_stream_unprepare);
+
+/*
+ * slim_stream_free() - Free a SLIMbus Stream
+ *
+ * @stream: instance of slim stream runtime to free
+ *
+ * This API will un allocate all the memory associated with
+ * slim stream runtime, user is not allowed to make an dereference
+ * to stream after this call.
+ *
+ * Return: zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to shutdown() operation.
+ */
+int slim_stream_free(struct slim_stream_runtime *stream)
+{
+	struct slim_device *sdev = stream->dev;
+
+	spin_lock(&sdev->stream_list_lock);
+	list_del(&stream->node);
+	spin_unlock(&sdev->stream_list_lock);
+
+	kfree(stream->name);
+	kfree(stream);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_stream_free);