scsi: lpfc: NVME Initiator: Base modifications

NVME Initiator: Base modifications

This patch adds base modifications for NVME initiator support.

The base modifications consist of:
- Formal split of SLI3 rings from SLI-4 WQs (sometimes referred to as
  rings as well) as implementation now widely varies between the two.
- Addition of configuration modes:
   SCSI initiator only; NVME initiator only; NVME target only; and
   SCSI and NVME initiator.
   The configuration mode drives overall adapter configuration,
   offloads enabled, and resource splits.
   NVME support is only available on SLI-4 devices and newer fw.
- Implements the following based on configuration mode:
  - Exchange resources are split by protocol; Obviously, if only
     1 mode, then no split occurs. Default is 50/50. module attribute
     allows tuning.
  - Pools and config parameters are separated per-protocol
  - Each protocol has it's own set of queues, but share interrupt
    vectors.
     SCSI:
       SLI3 devices have few queues and the original style of queue
         allocation remains.
       SLI4 devices piggy back on an "io-channel" concept that
         eventually needs to merge with scsi-mq/blk-mq support (it is
	 underway).  For now, the paradigm continues as it existed
	 prior. io channel allocates N msix and N WQs (N=4 default)
	 and either round robins or uses cpu # modulo N for scheduling.
	 A bunch of module parameters allow the configuration to be
	 tuned.
     NVME (initiator):
       Allocates an msix per cpu (or whatever pci_alloc_irq_vectors
         gets)
       Allocates a WQ per cpu, and maps the WQs to msix on a WQ #
         modulo msix vector count basis.
       Module parameters exist to cap/control the config if desired.
  - Each protocol has its own buffer and dma pools.

I apologize for the size of the patch.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>

----
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 6 insertions, 0 deletions

diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index 4d7062258cf8..def0c0a5b17e 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -135,6 +135,8 @@ struct lpfc_scsi_buf {
 
 	uint32_t timeout;
 
+	uint16_t flags;  /* TBD convert exch_busy to flags */
+#define LPFC_SBUF_XBUSY         0x1     /* SLI4 hba reported XB on WCQE cmpl */
 	uint16_t exch_busy;     /* SLI4 hba reported XB on complete WCQE */
 	uint16_t status;	/* From IOCB Word 7- ulpStatus */
 	uint32_t result;	/* From IOCB Word 4. */
@@ -164,6 +166,8 @@ struct lpfc_scsi_buf {
 	 * Iotag is in here
 	 */
 	struct lpfc_iocbq cur_iocbq;
+	uint16_t cpu;
+
 	wait_queue_head_t *waitq;
 	unsigned long start_time;
 
@@ -186,5 +190,7 @@ struct lpfc_scsi_buf {
 #define NO_MORE_OAS_LUN		-1
 #define NOT_OAS_ENABLED_LUN	NO_MORE_OAS_LUN
 
+#define TXRDY_PAYLOAD_LEN	12
+
 int lpfc_sli4_scmd_to_wqidx_distr(struct lpfc_hba *phba,
 				  struct lpfc_scsi_buf *lpfc_cmd);