summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
authorBruce Allan <bruce.w.allan@intel.com>2013-02-20 08:06:32 +0400
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2013-03-08 13:28:59 +0400
commitce43a2168c59bc47b5f0c1825fd5f9a2a9e3b447 (patch)
tree501f8b36299ec83afd9966eb4dd051383fb8035a /drivers/net
parente5fe2541b5e67c2f5b37c58f0148956b1014c2a7 (diff)
downloadlinux-ce43a2168c59bc47b5f0c1825fd5f9a2a9e3b447.tar.xz
e1000e: cleanup USLEEP_RANGE checkpatch checks
Resolve strict checkpatch USLEEP_RANGE checks by converting delays and sleeps as described in ./Documentation/timers/timers-howto.txt. Three other violations of the text have also been fixed. CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/ethernet/intel/e1000e/80003es2lan.c12
-rw-r--r--drivers/net/ethernet/intel/e1000e/82571.c12
-rw-r--r--drivers/net/ethernet/intel/e1000e/e1000.h2
-rw-r--r--drivers/net/ethernet/intel/e1000e/ethtool.c10
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c16
-rw-r--r--drivers/net/ethernet/intel/e1000e/mac.c10
-rw-r--r--drivers/net/ethernet/intel/e1000e/nvm.c2
-rw-r--r--drivers/net/ethernet/intel/e1000e/phy.c12
8 files changed, 38 insertions, 38 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index 30cf42cbeca2..b71c8502a2b3 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -395,7 +395,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
* before the device has completed the "Page Select" MDI
* transaction. So we wait 200us after each MDI command...
*/
- udelay(200);
+ usleep_range(200, 400);
/* ...and verify the command was successful. */
ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
@@ -405,13 +405,13 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
return -E1000_ERR_PHY;
}
- udelay(200);
+ usleep_range(200, 400);
ret_val = e1000e_read_phy_reg_mdic(hw,
MAX_PHY_REG_ADDRESS & offset,
data);
- udelay(200);
+ usleep_range(200, 400);
} else {
ret_val = e1000e_read_phy_reg_mdic(hw,
MAX_PHY_REG_ADDRESS & offset,
@@ -464,7 +464,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
* before the device has completed the "Page Select" MDI
* transaction. So we wait 200us after each MDI command...
*/
- udelay(200);
+ usleep_range(200, 400);
/* ...and verify the command was successful. */
ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
@@ -474,13 +474,13 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
return -E1000_ERR_PHY;
}
- udelay(200);
+ usleep_range(200, 400);
ret_val = e1000e_write_phy_reg_mdic(hw,
MAX_PHY_REG_ADDRESS &
offset, data);
- udelay(200);
+ usleep_range(200, 400);
} else {
ret_val = e1000e_write_phy_reg_mdic(hw,
MAX_PHY_REG_ADDRESS &
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index c0477fbe6eb3..7380442a3829 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -437,7 +437,7 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
return ret_val;
phy->id = (u32)(phy_id << 16);
- udelay(20);
+ usleep_range(20, 40);
ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id);
if (ret_val)
return ret_val;
@@ -482,7 +482,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
if (!(swsm & E1000_SWSM_SMBI))
break;
- udelay(50);
+ usleep_range(50, 100);
i++;
}
@@ -499,7 +499,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
if (er32(SWSM) & E1000_SWSM_SWESMBI)
break;
- udelay(50);
+ usleep_range(50, 100);
}
if (i == fw_timeout) {
@@ -1022,7 +1022,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
}
if (hw->nvm.type == e1000_nvm_flash_hw) {
- udelay(10);
+ usleep_range(10, 20);
ctrl_ext = er32(CTRL_EXT);
ctrl_ext |= E1000_CTRL_EXT_EE_RST;
ew32(CTRL_EXT, ctrl_ext);
@@ -1529,7 +1529,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
status = er32(STATUS);
er32(RXCW);
/* SYNCH bit and IV bit are sticky */
- udelay(10);
+ usleep_range(10, 20);
rxcw = er32(RXCW);
if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
@@ -1632,7 +1632,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
* the IV bit and restart Autoneg
*/
for (i = 0; i < AN_RETRY_COUNT; i++) {
- udelay(10);
+ usleep_range(10, 20);
rxcw = er32(RXCW);
if ((rxcw & E1000_RXCW_SYNCH) &&
(rxcw & E1000_RXCW_C))
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 6ba114938ff9..e371f771cf8b 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -597,7 +597,7 @@ static inline s32 __ew32_prepare(struct e1000_hw *hw)
s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT;
while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i)
- udelay(50);
+ usleep_range(50, 100);
return i;
}
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index e43c9440a127..23d5d9051113 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -1297,7 +1297,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
ew32(CTRL, ctrl_reg);
e1e_flush();
- udelay(500);
+ usleep_range(500, 1000);
return 0;
}
@@ -1323,7 +1323,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
e1e_wphy(hw, PHY_REG(2, 21), phy_reg);
/* Assert SW reset for above settings to take effect */
hw->phy.ops.commit(hw);
- mdelay(1);
+ usleep_range(1000, 2000);
/* Force Full Duplex */
e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C);
@@ -1364,7 +1364,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
/* force 1000, set loopback */
e1e_wphy(hw, MII_BMCR, 0x4140);
- mdelay(250);
+ msleep(250);
/* Now set up the MAC to the same speed/duplex as the PHY. */
ctrl_reg = er32(CTRL);
@@ -1396,7 +1396,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
if (hw->phy.type == e1000_phy_m88)
e1000_phy_disable_receiver(adapter);
- udelay(500);
+ usleep_range(500, 1000);
return 0;
}
@@ -1704,7 +1704,7 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
/* On some Phy/switch combinations, link establishment
* can take a few seconds more than expected.
*/
- msleep(5000);
+ msleep_interruptible(5000);
if (!(er32(STATUS) & E1000_STATUS_LU))
*data = 1;
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 0ed04fcae187..382813dfc7a8 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -312,7 +312,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
ew32(CTRL, mac_reg);
e1e_flush();
- udelay(10);
+ usleep_range(10, 20);
mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
ew32(CTRL, mac_reg);
e1e_flush();
@@ -1517,7 +1517,7 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
if (ret_val)
return ret_val;
- udelay(20);
+ usleep_range(20, 40);
ctrl_ext = er32(CTRL_EXT);
ctrl_reg = er32(CTRL);
@@ -1527,11 +1527,11 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
e1e_flush();
- udelay(20);
+ usleep_range(20, 40);
ew32(CTRL, ctrl_reg);
ew32(CTRL_EXT, ctrl_ext);
e1e_flush();
- udelay(20);
+ usleep_range(20, 40);
return 0;
}
@@ -2037,7 +2037,7 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
do {
data = er32(STATUS);
data &= E1000_STATUS_LAN_INIT_DONE;
- udelay(100);
+ usleep_range(100, 200);
} while ((!data) && --loop);
/* If basic configuration is incomplete before the above loop
@@ -2801,7 +2801,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
/* Convert offset to bytes. */
act_offset = (i + new_bank_offset) << 1;
- udelay(100);
+ usleep_range(100, 200);
/* Write the bytes to the new bank. */
ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
act_offset,
@@ -2809,7 +2809,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
if (ret_val)
break;
- udelay(100);
+ usleep_range(100, 200);
ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
act_offset + 1,
(u8)(data >> 8));
@@ -3077,7 +3077,7 @@ static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
for (program_retries = 0; program_retries < 100; program_retries++) {
e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
- udelay(100);
+ usleep_range(100, 200);
ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
if (!ret_val)
break;
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index b78e02174601..b25cc4300de7 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -596,7 +596,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
* serdes media type.
*/
/* SYNCH bit and IV bit are sticky. */
- udelay(10);
+ usleep_range(10, 20);
rxcw = er32(RXCW);
if (rxcw & E1000_RXCW_SYNCH) {
if (!(rxcw & E1000_RXCW_IV)) {
@@ -613,7 +613,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
status = er32(STATUS);
if (status & E1000_STATUS_LU) {
/* SYNCH bit and IV bit are sticky, so reread rxcw. */
- udelay(10);
+ usleep_range(10, 20);
rxcw = er32(RXCW);
if (rxcw & E1000_RXCW_SYNCH) {
if (!(rxcw & E1000_RXCW_IV)) {
@@ -1382,7 +1382,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
if (!(swsm & E1000_SWSM_SMBI))
break;
- udelay(50);
+ usleep_range(50, 100);
i++;
}
@@ -1400,7 +1400,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
if (er32(SWSM) & E1000_SWSM_SWESMBI)
break;
- udelay(50);
+ usleep_range(50, 100);
}
if (i == timeout) {
@@ -1712,7 +1712,7 @@ s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
while (timeout) {
if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
break;
- udelay(100);
+ usleep_range(100, 200);
timeout--;
}
diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c
index 84fecc268162..44ddc0a0ee0e 100644
--- a/drivers/net/ethernet/intel/e1000e/nvm.c
+++ b/drivers/net/ethernet/intel/e1000e/nvm.c
@@ -630,7 +630,7 @@ void e1000e_reload_nvm_generic(struct e1000_hw *hw)
{
u32 ctrl_ext;
- udelay(10);
+ usleep_range(10, 20);
ctrl_ext = er32(CTRL_EXT);
ctrl_ext |= E1000_CTRL_EXT_EE_RST;
ew32(CTRL_EXT, ctrl_ext);
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 9b3d16729660..60dbf022e986 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -97,7 +97,7 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
return ret_val;
phy->id = (u32)(phy_id << 16);
- udelay(20);
+ usleep_range(20, 40);
ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id);
if (ret_val)
return ret_val;
@@ -165,7 +165,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
* the lower time out
*/
for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
- udelay(50);
+ usleep_range(50, 100);
mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY)
break;
@@ -184,7 +184,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
* reading duplicate data in the next MDIC transaction.
*/
if (hw->mac.type == e1000_pch2lan)
- udelay(100);
+ usleep_range(100, 200);
return 0;
}
@@ -223,7 +223,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
* the lower time out
*/
for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
- udelay(50);
+ usleep_range(50, 100);
mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY)
break;
@@ -241,7 +241,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
* reading duplicate data in the next MDIC transaction.
*/
if (hw->mac.type == e1000_pch2lan)
- udelay(100);
+ usleep_range(100, 200);
return 0;
}
@@ -2120,7 +2120,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
ew32(CTRL, ctrl);
e1e_flush();
- udelay(150);
+ usleep_range(150, 300);
phy->ops.release(hw);